Search results for: 'gloss b direct'

Protect high-traffic areas with our Galvanized Corner Guard. Made from durable 16 gauge steel with a G90 galvanized coating for superior corrosion resistance, conforming to ASTM A653 standards. Ideal for industrial, commercial, and MRO applications requiring robust wall and corner protection. Learn More

This 3-piece Aviation Snip Set includes essential tools for any metal fabricator's toolkit. The set contains a left-cut (red handle), right-cut (green handle), and straight-cut (yellow handle) snip. Featuring hardened steel blades and a compound leverage design, these snips provide maximum cutting power with minimal effort. Ideal for cutting sheet metal in fabrication, HVAC, and roofing projects. In stock Los Angeles. Learn More

The 1-¼” Single Lockbox with a single hole is an essential component for security gates and fences. Constructed from high-quality, weldable steel, it provides a durable housing for gate locks. Designed for easy installation and long-term performance in commercial and residential applications. Learn More

Galvanized Slotted Angle is a versatile steel framing component ideal for constructing custom racks, shelves, and supports. Its galvanized finish provides excellent corrosion resistance, while the 16-gauge thickness ensures reliable performance for light to medium-duty MRO and fabrication projects. Learn More

Our 3-1/2x2-1/4 Weldable Butt Hinges are engineered from high-strength, low-carbon steel for maximum weld penetration and durability. These components are designed for heavy-duty applications where a permanent, strong pivot is required. Ideal for steel gates, doors, and MRO projects. Learn More

Engineered for durability, these 4x4 Heavy Duty Weldable Butt Hinges are fabricated from high-grade, weldable carbon steel. Their robust construction provides a reliable pivot point for heavy gates, doors, and industrial enclosures. Supplied unfinished for easy welding and custom finishing. Learn More

5/8" x 16 gauge A500B Galvanized Steel Square Tube, 24 ft length. Conforms to ASTM A500 with 58,000 PSI tensile strength. The hot-dip zinc coating provides excellent corrosion resistance for outdoor applications. This small profile is ideal for light structural frames, gates, railings, and agricultural uses. In stock for Los Angeles pickup. Learn More

1-1/2" OD x 0.083" wall A500B Hot Rolled Steel Round Tube. Conforming to ASTM A500, this structural grade tubing offers a minimum 58,000 PSI tensile strength and excellent weldability. Its medium diameter is ideal for fabricating equipment frames, handrails, roll cages, and general structural supports. Available in 20 ft lengths for same-day pickup in Los Angeles. Learn More

1" x 1/8" 1018 Cold Rolled Steel Flat Bar, 144" length. Conforms to ASTM A108, offering 63,800 PSI tensile strength and excellent machinability (70%). The cold drawn process provides a smooth, scale-free finish and tight dimensional tolerances. This medium-width bar is ideal for structural bracing, machine ways, and wear strips where precision is key. In stock for Los Angeles pickup. Learn More

1-1/4" x 1-1/4" 304 Stainless Steel Square Tube with a 0.065" wall and a 180-grit satin finish. Conforming to ASTM A269, it offers 73,200 PSI tensile strength, excellent corrosion resistance, and superior weldability. Its combination of structural integrity and polished appearance makes it ideal for architectural handrails, support frames, and decorative applications. In stock for Los Angeles pickup. Learn More

4" x 4" x 0.120" wall 304 Stainless Steel Square Tube, 240" length. Meets ASTM A269 specifications. This large structural tube offers 73,200 PSI tensile strength, excellent corrosion resistance, and superior weldability. Its substantial size is ideal for heavy-duty applications like structural columns, industrial supports, and large equipment frames. In stock for same-day cutting and pickup in Los Angeles. Learn More

This 6063-T5 Aluminum Angle measures 1-1/4" x 1-1/4" with a 3/16" wall thickness, supplied in a 144" length. Conforming to ASTM B308, it offers 27,000 PSI tensile strength, excellent corrosion resistance, and a superior surface finish. Often called architectural aluminum, this small-profile angle is ideal for window frames, decorative trim, and lightweight structural support. In stock for same-day Los Angeles pickup. Learn More

A36 Hot Rolled Steel Angle with 3" and 2" legs and a 3/16" thickness. This structural angle conforms to ASTM A36 specifications, providing a minimum yield strength of 36,000 PSI and excellent weldability. Its medium size is ideal for structural framing, equipment bases, support brackets, and general fabrication projects requiring robust, cost-effective steel components. In stock for same-day pickup in Los Angeles. Learn More

2-1/2" x 2-1/2" x 3/16" 304 Stainless Steel Angle, available in 20-foot lengths. This versatile austenitic stainless angle conforms to ASTM A276, offering 73,200 PSI tensile strength, excellent corrosion resistance, and superior weldability. Its medium size is ideal for structural framing, equipment bases, shelving, and architectural trim where both strength and a clean finish are required. In stock for Los Angeles pickup. Learn More

3/4" x 1/4" Type 304 Stainless Steel Flat Bar, 144" length. Conforms to ASTM A276 and offers a balance of strength and excellent corrosion resistance. With 73,200 PSI tensile strength and superior weldability, this versatile bar is ideal for manufacturing structural brackets, braces, and food processing equipment components. Its clean mill finish is also suitable for architectural trim. In stock for Los Angeles pickup. Learn More

This 1-1/4" x 1-1/4" x 1/4" Hot Rolled Steel Angle is manufactured from A36 carbon steel, meeting ASTM A36 specifications. It offers a minimum yield strength of 36,000 PSI and excellent weldability, making it ideal for general fabrication. This small-profile angle is perfect for creating light structural frames, support brackets, equipment guards, and custom shelving projects. In stock for immediate Los Angeles pickup. Learn More

A36 Hot Rolled Steel Angle with 6" x 6" legs, 5/16" thickness, and a 240" length. Conforming to ASTM A36, this structural angle provides a minimum yield strength of 36,000 PSI and excellent weldability for demanding applications. Its large profile makes it ideal for heavy structural frames, building columns, equipment bases, and industrial supports. In stock for immediate Los Angeles pickup. Learn More

This 1-1/2" x 3/16" 304 Stainless Steel Angle offers excellent corrosion resistance and weldability for structural applications. Conforming to ASTM A276, it provides 73,200 PSI tensile strength. Its versatile 1-1/2" leg size is ideal for medium-duty structural framing, equipment bases, shelving, and architectural trim where both strength and a clean finish are required. In stock for immediate Los Angeles pickup. Learn More

A36 Hot Rolled Steel Angle measuring 1-1/4" x 1-1/4" legs with a 1/8" thickness. Conforming to ASTM A36, this versatile structural angle offers a minimum yield strength of 36,000 PSI and excellent weldability. Its small profile is perfect for light-duty framing, custom brackets, equipment guards, and general fabrication projects. In stock for immediate Los Angeles pickup. Learn More

1-1/4" x 1-1/4" x 3/16" A36 Hot Rolled Steel Angle, often called angle iron. This structural grade steel conforms to ASTM A36, providing a minimum yield strength of 36,000 PSI and excellent weldability for general fabrication. Its small profile is ideal for light framing, support brackets, trim, and equipment guards. In stock for immediate cutting and same-day Los Angeles pickup. Learn More

A36 Hot Rolled Steel Angle measuring 1-1/2" x 1-1/2" with a 1/4" thickness, in a 20-foot (240") length. This general-purpose structural steel conforms to ASTM A36, offering a minimum yield strength of 36,000 PSI and excellent weldability. Its medium size is ideal for structural framing, equipment manufacturing, and industrial shelving where reliable strength is required. In stock for Los Angeles pickup. Learn More

2" x 2" x 3/16" A36 Hot Rolled Steel Angle in 20-foot lengths. Conforming to ASTM A36, this structural angle provides a minimum 36,000 PSI yield strength and excellent weldability for fabrication. Its versatile medium size is ideal for structural framing, equipment bases, industrial shelving, and general repairs. In stock and available for same-day pickup in Los Angeles. Learn More

A36 Hot Rolled Steel Angle, 4" x 4" x 3/8" in 20 ft (240") lengths. Conforms to ASTM A36, providing a minimum yield strength of 36,000 PSI with excellent weldability and fabrication characteristics. The large 4-inch legs are ideal for heavy structural applications, building frames, equipment bases, and industrial supports. In stock and available for same-day pickup in Los Angeles. Learn More

304 Stainless Steel Flat Bar measuring 2" wide by 3/16" thick, in a 144" length. This versatile bar meets ASTM A276 standards and offers 73,200 PSI tensile strength, excellent corrosion resistance, and superior weldability. Its medium size is ideal for structural bracing, machine components, food equipment frames, and architectural trim. In stock for same-day Los Angeles pickup. Learn More

1-1/2" wide by 3/16" thick 6061-T6 Aluminum Flat Bar, sold in 144" lengths. Conforming to ASTM B211, this versatile alloy offers 45,000 PSI tensile strength, good machinability, and excellent corrosion resistance. This medium-width bar is ideal for structural bracing, machine ways, and custom fabricated components. In stock for Los Angeles pickup. Learn More

4" x 3/16" 6061-T6 Aluminum Flat Bar, 144" length. Conforms to ASTM B211, offering a combination of high strength (45,000 PSI tensile), good machinability, and excellent corrosion resistance. This large-width bar is ideal for structural applications, including base plates, heavy equipment mounting, and die components. Ready for same-day cutting and pickup in Los Angeles. Learn More

This 1/4" x 3/4" 6061-T6 Aluminum Flat Bar is a versatile, heat-treatable grade conforming to ASTM B211. It combines high strength (45,000 PSI tensile) with excellent weldability, machinability, and corrosion resistance. This small-width profile is ideal for fabricating custom brackets, support straps, base plates, and mounting blocks for machinery and structural projects. In stock and available for same-day pickup in Los Angeles. Learn More

This 1018 Cold Rolled Flat Bar measures 6 inches wide by 3/16 inch thick, in a 144-inch length. Conforming to ASTM A108, it provides a smooth, scale-free surface, tight dimensional tolerances, and excellent machinability. Its 63,800 PSI tensile strength makes it ideal for manufacturing base plates, heavy structural bracing, and die components. In stock for same-day Los Angeles pickup. Learn More

1/2" x 3/4" 1018 Cold Rolled Steel Flat Bar, sold in 144" lengths. This product meets ASTM A108 specifications and offers 63,800 PSI tensile strength, a smooth surface finish, and tight dimensional tolerances. Its excellent machinability and good weldability make it a versatile choice. The small profile is ideal for brackets, straps, and shims. In stock for Los Angeles pickup. Learn More

2" x 1" 1018 Cold Rolled Steel Flat Bar, 144" length. Conforms to ASTM A108 with a tensile strength of 63,800 PSI and a smooth, scale-free surface. This material offers excellent machinability and tight dimensional tolerances, making it ideal for precision applications like machine ways, mounting brackets, and structural bracing. In stock for same-day Los Angeles pickup. Learn More

This 1" x 1" x 1/8" Type 304 Stainless Steel Angle provides excellent corrosion resistance and structural rigidity. Conforming to ASTM A276, it features 73,200 PSI tensile strength and superior weldability. Its small profile is ideal for light framing, equipment brackets, corner guards, and architectural trim where both strength and a clean finish are required. In stock for same-day cutting and pickup in Los Angeles. Learn More

1" x 1" x 1/4" 304 Stainless Steel Angle, available in 240" lengths. This austenitic grade conforms to ASTM A276, offering 73,200 PSI tensile strength, excellent weldability, and superior corrosion resistance. As a small profile, it is ideal for light framing, equipment guards, and architectural trim. In stock for immediate Los Angeles pickup. Learn More

This 1-1/2" x 1-1/2" x 1/8" angle is manufactured from Type 304 stainless steel, conforming to ASTM A276 specifications. It offers a tensile strength of 73,200 PSI, excellent corrosion resistance, and superior weldability. Its medium size is ideal for structural framing, equipment bases, brackets, and architectural trim where both strength and a clean finish are required. In stock for same-day Los Angeles pickup. Learn More

This 2" x 2" x 1/8" Type 304 Stainless Steel Angle offers an excellent combination of strength, corrosion resistance, and weldability. Conforming to ASTM A276, it provides 73,200 PSI tensile strength for reliable performance. Its medium size is ideal for structural framing, equipment bases, shelving, and general fabrication projects requiring durability and a clean finish. In stock for same-day Los Angeles pickup. Learn More

This 1/8" x 1/2" 304 Stainless Steel Flat Bar, sold in 144" lengths, is a versatile and corrosion-resistant material conforming to ASTM A276. With excellent weldability and ductility, it's a staple for general fabrication. Its small profile is perfectly suited for creating durable brackets, support straps, shims, and decorative trim. In stock and available for same-day pickup in Los Angeles. Learn More

2-1/2" x 1/8" 304 Stainless Steel Flat Bar, 144" length. Conforms to ASTM A276, offering 73,200 PSI tensile strength, excellent corrosion resistance, and superior weldability. This versatile austenitic grade is non-magnetic in its annealed state. The medium-width profile is ideal for structural bracing, equipment framework, base plates, and general fabrication. In stock for Los Angeles pickup. Learn More

304 Stainless Steel Flat Bar with a 3-inch width and 1/8-inch thickness, sold in 144-inch lengths. Conforming to ASTM A276, this bar provides 73,200 PSI tensile strength, excellent corrosion resistance, and superior weldability. Its versatile size is ideal for structural braces, equipment framework, base plates, and general fabrication projects. In stock for immediate pickup in Los Angeles. Learn More

3/16" x 3/4" Type 304 Stainless Steel Flat Bar, 144" length. Conforms to ASTM A276, offering 73,200 PSI tensile strength, excellent corrosion resistance, and superior weldability. This versatile, small-profile flat bar is ideal for manufacturing brackets, frame components, architectural trim, and food processing equipment supports. Dual-certified 304/304L for enhanced welding performance. In stock for immediate Los Angeles pickup. Learn More

304 Stainless Steel Flat Bar, 1" wide by 3/16" thick. Conforming to ASTM A276, this bar offers a versatile combination of excellent corrosion resistance, high ductility, and superior weldability. Its 73,200 PSI tensile strength makes it ideal for structural bracing, equipment frames, and architectural trim. This medium-sized bar is a reliable choice for fabrication projects. In stock for immediate Los Angeles pickup. Learn More

3/16" x 2-1/2" Stainless Steel Flat Bar, grade 304. Conforming to ASTM A276, this bar offers a versatile combination of excellent corrosion resistance, weldability, and 73,200 PSI tensile strength. Its medium width is ideal for structural bracing, machine ways, equipment framework, and architectural trim. In stock and available for same-day pickup in Los Angeles. Learn More

304 Stainless Steel Flat Bar measuring 3" wide by 3/16" thick, sold in 144" lengths. This versatile bar conforms to ASTM A276 standards and provides excellent corrosion resistance and weldability. Its 73,200 PSI tensile strength makes it ideal for structural bracing, equipment frames, and general fabrication. In stock for immediate Los Angeles pickup or delivery. Learn More

1/4" thick by 1/2" wide 304 Stainless Steel Flat Bar, 144" length. Conforms to ASTM A276, offering excellent corrosion resistance and weldability with 73,200 PSI tensile strength. This versatile, small-profile bar is ideal for manufacturing precision brackets, straps, decorative trim, and support components. It provides a durable, non-magnetic solution for fabrication and construction. In stock for Los Angeles pickup. Learn More

2-1/2" x 1/4" 304 Stainless Steel Flat Bar, 144" length. Conforms to ASTM A276, delivering 73,200 PSI tensile strength and excellent corrosion resistance. This versatile austenitic stainless is ideal for structural supports, food processing equipment, and architectural trim. Its non-magnetic properties and superior weldability make it a top choice for fabrication projects. In stock for Los Angeles pickup. Learn More

304 Stainless Steel Flat Bar measuring 3" wide by 1/4" thick in a 144" length. Certified to ASTM A276, this versatile bar offers 73,200 PSI tensile strength, excellent corrosion resistance, and superior weldability. Its medium size is ideal for fabricating structural braces, supports, base plates, and components for food processing equipment. In stock Los Angeles. Learn More

This 4" x 1/4" 304 Stainless Steel Flat Bar, sold in 144" lengths, conforms to ASTM A276 standards. It features 73,200 PSI tensile strength, excellent weldability, and superior corrosion resistance. As a large profile bar, it provides substantial strength for heavy structural applications, base plates, and equipment framework. In stock for Los Angeles pickup. Learn More

6" wide by 1/4" thick 304 Stainless Steel Flat Bar in a 144" length. Conforming to ASTM A276, this bar provides excellent corrosion resistance and weldability for demanding environments. With a tensile strength of 73,200 PSI, this large-profile bar is ideal for structural supports, base plates, and heavy-duty fabrication projects. In stock for immediate Los Angeles pickup. Learn More

A 1" x 3/8" 304 Stainless Steel Flat Bar, 144" in length. This versatile bar meets ASTM A276 standards and offers 73,200 PSI tensile strength, excellent corrosion resistance, and superior weldability. Its medium size is ideal for structural bracing, machine components, supports, and general fabrication projects requiring strength and longevity. In stock for same-day pickup in Los Angeles. Learn More

A 1-1/4" x 3/8" Type 304 Stainless Steel Flat Bar, 144" long. Conforming to ASTM A276, this bar offers excellent corrosion resistance and weldability with a tensile strength of 73,200 PSI. Its versatile medium size is ideal for structural bracing, equipment framework, base plates, and general fabrication projects. In stock for same-day Los Angeles pickup. Learn More

A versatile 2 Inch by 3/8 Inch 304 Stainless Steel Flat Bar, 144 inches long. This bar meets ASTM A276 standards and offers an excellent combination of corrosion resistance, strength, and weldability with a tensile strength of 73,200 PSI. Its medium width makes it ideal for structural bracing, machine ways, framework, and food processing equipment. Available for same-day pickup in Los Angeles. Learn More

4" x 3/8" 304 Stainless Steel Flat Bar, 144" length. Conforms to ASTM A276, delivering excellent corrosion resistance, high ductility, and superior weldability. With a tensile strength of 73,200 PSI, this large-format flat bar is ideal for manufacturing base plates, heavy structural supports, die components, and equipment framework. In stock for immediate cutting and pickup in Los Angeles. Learn More

1/2" x 1-1/2" 304 Stainless Steel Flat Bar, 144" long. This versatile austenitic grade conforms to ASTM A276, delivering a balance of strength, excellent corrosion resistance, and superior weldability. Its medium size is ideal for structural bracing, equipment framework, machine ways, and architectural supports. In stock for immediate Los Angeles pickup. Learn More

3" x 1/2" 304 Stainless Steel Flat Bar, 144" length. Conforms to ASTM A276. This versatile austenitic stainless offers excellent corrosion resistance and weldability with 73,200 PSI tensile strength. Its medium size is ideal for structural bracing, machine ways, wear strips, and architectural trim. In stock and ready for same-day pickup in Los Angeles. Learn More

A 4" wide by 1/2" thick 304 Stainless Steel Flat Bar, supplied in 144" lengths. This versatile austenitic grade conforms to ASTM A276 and delivers 73,200 PSI tensile strength with excellent corrosion resistance and weldability. Its substantial cross-section is ideal for structural supports, base plates, heavy brackets, and industrial equipment frames. In stock for Los Angeles pickup. Learn More

This 6" x 1/2" 304 Stainless Steel Flat Bar is a versatile, corrosion-resistant structural material sold in 144" lengths. Conforming to ASTM A276, it provides 73,200 PSI tensile strength, excellent weldability, and superior formability. Its substantial size makes it ideal for manufacturing heavy-duty base plates, structural framing, and equipment supports in food processing and architectural applications. In stock for Los Angeles pickup. Learn More

2" x 1" x 0.120" wall 304 Stainless Steel Rectangular Tube. This versatile tubing meets ASTM A269 and A554 standards, delivering 73,200 PSI tensile strength with excellent corrosion resistance and weldability. Its balanced properties and high strength-to-weight ratio make it ideal for structural framing, architectural applications, and equipment supports. In stock for immediate pickup in Los Angeles. Learn More

1/4" x 1/4" 304 Stainless Steel Square Bar, 144" length. Conforms to ASTM A276, offering excellent corrosion resistance and weldability with 73,200 PSI tensile strength. This austenitic, non-magnetic grade is ideal for structural supports, frames, shafts, and food processing equipment where sanitation is critical. Its small profile is suited for light-duty braces and mounting hardware. In stock for Los Angeles pickup. Learn More

5/16" x 5/16" 304 Stainless Steel Square Bar, available in 144" lengths. Certified to ASTM A276, this bar provides a tensile strength of 73,200 PSI with excellent weldability and corrosion resistance. Its small profile is ideal for light structural supports, braces, frames, and decorative architectural work. This versatile, non-magnetic bar is ready for fabrication. In stock for Los Angeles pickup. Learn More

0.063" x 48" x 120" (4'x10') 3003-H14 Aluminum Diamond Plate. This lightweight, non-slip sheet conforms to ASTM B209 standards. It offers excellent corrosion resistance, formability, and weldability. The raised diamond pattern provides grip and rigidity, making this medium-thickness plate ideal for trailer flooring, wainscoting, wall guards, and toolboxes. In stock and available for same-day Los Angeles pickup. Learn More

3/16" x 1/2" 6061-T6 Aluminum Flat Bar, 144" length. Conforms to ASTM B211 with 45,000 PSI tensile strength. This grade offers a great combination of strength, good machinability, and weldability. The small profile is ideal for lightweight structural framing, mounting brackets, shims, and custom fabrication projects. In stock for immediate Los Angeles pickup. Learn More

2" x 3/16" 6061-T6 Aluminum Flat Bar, 144" length. Conforming to ASTM B211, this versatile alloy provides a high strength-to-weight ratio, good machinability, and excellent corrosion resistance. Its 45,000 PSI tensile strength makes it ideal for structural bracing, machine ways, and custom mounting plates. This medium-width bar is in stock for same-day Los Angeles pickup. Learn More

6061-T6 Aluminum Flat Bar measuring 1/4" thick by 1-1/2" wide, in a 144" length. Conforming to ASTM B211, this versatile bar offers a high strength-to-weight ratio with 45,000 PSI tensile strength, good machinability, and excellent corrosion resistance. Ideal for structural bracing, machine ways, and custom fabricated parts. In stock for same-day Los Angeles pickup. Learn More

1/4" x 2" 6061-T6 Aluminum Flat Bar, 144" length. Conforms to ASTM B211 with 45,000 PSI tensile strength. This grade offers a versatile combination of high strength, good machinability, and excellent corrosion resistance. The medium 2" width is ideal for structural bracing, machine ways, base plates, and general fabrication projects. In stock for same-day Los Angeles pickup. Learn More

4 inch x 1/4 inch 6061-T6 Aluminum Flat Bar, 144-inch length. Conforming to ASTM B211, this versatile alloy combines 45,000 PSI tensile strength with good machinability and excellent corrosion resistance. The T6 temper provides optimal strength for structural applications. This large width is ideal for base plates, heavy structural components, and die components. In stock for immediate Los Angeles pickup. Learn More

6061-T6 Aluminum Flat Bar measuring 1/4" thick by 6" wide in a 144" length. Conforms to ASTM B211. This versatile alloy offers a combination of high strength (45,000 PSI tensile), excellent corrosion resistance, and good machinability. The large width makes it ideal for base plates, heavy structural supports, and machined components. In stock for same-day Los Angeles pickup. Learn More

This 1/2" x 3/8" 6061-T6 Aluminum Flat Bar is a versatile, high-strength structural alloy conforming to ASTM B211. It provides 45,000 PSI tensile strength, excellent machinability, and superior corrosion resistance. The small profile is ideal for fabricating custom brackets, support straps, mounting plates, and small frame stock for machinery and architectural projects. In stock and ready for same-day Los Angeles pickup. Learn More

3/8" x 3" 6061-T6 Aluminum Flat Bar, 144" length. This versatile, heat-treatable grade conforms to ASTM B211 and provides 45,000 PSI tensile strength. It combines good machinability, excellent weldability, and superior corrosion resistance. Ideal for structural frames, support braces, base plates, and custom machined parts. In stock for same-day pickup in Los Angeles. Learn More

4" x 3/8" 6061-T6 Aluminum Flat Bar, 144" length. Conforming to ASTM B211, this alloy offers a versatile combination of 45,000 PSI tensile strength, good machinability, and excellent weldability. Its high strength-to-weight ratio and corrosion resistance make it ideal for demanding applications. This large width is perfect for structural frames, base plates, and heavy-duty brackets. In stock for same-day Los Angeles pickup. Learn More

1-1/2" x 5/8" 6061-T6 Aluminum Flat Bar, 144" length. Conforms to ASTM B211 with 45,000 PSI tensile strength, excellent weldability, and corrosion resistance. This versatile, medium-width bar is ideal for structural bracing, machine ways, mounting plates, and general fabrication. Its high strength-to-weight ratio makes it a top choice for projects requiring robust yet lightweight components. In stock for same-day Los Angeles pickup. Learn More

This 2" x 1" 6061-T6 Aluminum Flat Bar is a versatile, heat-treatable grade offering a superior combination of strength, workability, and corrosion resistance. Conforming to ASTM B211, it provides 45,000 PSI tensile strength and excellent weldability. Its medium size is ideal for structural bracing, machine ways, and custom fabricated parts. Cut to length and available for same-day pickup in Los Angeles. Learn More

A 1" x 3" 6061-T6 Aluminum Flat Bar, sold in 144" lengths. This versatile, heat-treatable grade conforms to ASTM B211 and features a 45,000 PSI tensile strength, good machinability, and excellent corrosion resistance. Its medium width is ideal for structural bracing, support brackets, wear strips, and custom machined components. In stock for same-day Los Angeles pickup. Learn More

1-1/4" x 1-1/4" 6061-T6 Aluminum Square Tube with a 0.125" wall thickness. Conforms to ASTM B221. This structural alloy provides an excellent strength-to-weight ratio with 45,000 PSI tensile strength, plus great machinability and weldability. Its medium size is ideal for structural frames, machine guards, railings, and custom fabrications. In stock and ready for same-day pickup in Los Angeles. Learn More

1-1/4" x 1-1/4" x 1/8" 6063-T5 Aluminum Angle, available in 144" lengths. Conforming to ASTM B308, this architectural grade offers excellent corrosion resistance, a smooth surface finish, and superior formability. With a tensile strength of 27,000 PSI, it's ideal for window frames, railings, and decorative trim where aesthetics are critical. In stock for same-day pickup in Los Angeles. Learn More

1" x 1" x 1/8" 6063 Aluminum Angle, 144" length. Known as architectural aluminum, this T5 temper angle conforms to ASTM B308. It offers excellent corrosion resistance, a smooth surface finish ideal for anodizing, and good formability. With 27,000 PSI tensile strength, it's perfect for light structural applications like window frames, railings, and decorative trim. In stock for immediate Los Angeles pickup. Learn More

6063-T5 Aluminum Angle with 2" x 2" legs, 1/8" thickness, and 144" length. Conforms to ASTM B308, offering 27,000 PSI tensile strength. Known as architectural aluminum, it has excellent corrosion resistance, formability, and a superior surface finish ideal for anodizing. This medium-sized angle is perfect for window frames, handrails, and decorative trim. In stock for Los Angeles pickup. Learn More

3" x 1.41" 6061-T6 Aluminum Channel, 144" length. Conforms to ASTM B308, offering 45,000 PSI tensile strength, excellent weldability, and superior corrosion resistance. This versatile structural profile combines a high strength-to-weight ratio with good machinability. Ideal for structural framing, equipment supports, machine bases, and architectural applications. In stock for Los Angeles pickup. Learn More

This 4" 6061-T6 Aluminum Channel offers an excellent strength-to-weight ratio for structural applications. Conforming to ASTM B308, it delivers 45,000 PSI tensile strength, superior corrosion resistance, and excellent weldability. Its larger profile is ideal for equipment bases, industrial supports, and heavy-duty framing. In stock for immediate Los Angeles pickup. Learn More

6063 Aluminum Channel with 1/2" height, 1/2" width, and 1/8" wall thickness. Conforms to ASTM B308, offering 27,000 PSI tensile strength, excellent corrosion resistance, and a superior surface finish. Known as the "architectural alloy," this small profile is ideal for decorative trim, window frames, signage, and custom enclosures. In stock Los Angeles. Learn More

1/8" x 1/2" 1018 Cold Rolled Steel Flat Bar, 144" length. Conforms to ASTM A108 with 63,800 PSI tensile strength and a smooth, scale-free finish. This grade offers excellent machinability and weldability, making its small profile ideal for fabricating custom brackets, straps, shims, and support braces. In stock for immediate Los Angeles pickup. Learn More

1/8" x 3/4" 1018 Cold Rolled Flat Bar, 144" length. Conforms to ASTM A108 with a tensile strength of 63,800 PSI. This grade offers excellent machinability and a smooth, scale-free surface due to the cold drawing process. Ideal for manufacturing small brackets, mounting straps, shims, and precision frame components. In stock for Los Angeles pickup. Learn More

2" x 1/8" 1018 Cold Rolled Steel Flat Bar, 144" length. Conforming to ASTM A108, this cold finished bar offers a smooth, scale-free surface and tight dimensional tolerances. With a tensile strength of 63,800 PSI and good machinability, it's ideal for manufacturing base plates, machine ways, and structural bracing. In stock for immediate cutting and Los Angeles pickup. Learn More

1" x 3/16" 1018 Cold Rolled Steel Flat Bar, 144" length. Conforms to ASTM A108, delivering 63,800 PSI tensile strength and a smooth, scale-free finish. Known for excellent machinability and weldability, this medium-width bar is a versatile choice for fabricating brackets, machine ways, and structural bracing. In stock for immediate Los Angeles pickup. Learn More

3/16" x 3" 1018 Cold Rolled Steel Flat Bar, 144" length. Conforms to ASTM A108 with 63,800 PSI tensile strength, superior dimensional tolerance, and a clean, smooth surface. It offers a good balance of strength, weldability, and excellent machinability. This medium-width bar is ideal for structural bracing, machine ways, and base plates. In stock for Los Angeles pickup. Learn More

1/4" x 1/2" Cold Rolled 1018 Steel Flat Bar, 144" length. Conforms to ASTM A108 standards, offering 63,800 PSI tensile strength, tight dimensional tolerances, and excellent machinability. The smooth, scale-free cold drawn finish is ideal for precision parts. This small size is perfect for manufacturing brackets, shims, and straps. In stock for same-day Los Angeles pickup. Learn More

1/4" x 5/8" 1018 Cold Rolled Steel Flat Bar, 144" length. Conforms to ASTM A108 with a tensile strength of 63,800 PSI and excellent machinability. The cold drawing process provides a smooth, scale-free surface and tight dimensional tolerances. This small-width bar is ideal for brackets, straps, shims, and precision-machined components. In stock for immediate Los Angeles pickup. Learn More

3/4" x 1/4" Cold Rolled Flat Bar in 1018 grade steel, sold in 144" lengths. Conforms to ASTM A108 with 63,800 PSI tensile strength and excellent machinability. The cold drawing process provides tight dimensional tolerances and a smooth, scale-free surface. This small-profile bar is ideal for manufacturing precision brackets, straps, and small machine components. In stock for same-day Los Angeles pickup. Learn More

1018 Cold Rolled Steel Flat Bar, 1-1/4" wide by 1/4" thick in 144" lengths. This bar conforms to ASTM A108 and offers a tensile strength of 63,800 PSI. The cold drawing process provides tight dimensional tolerances and a smooth, scale-free surface. It's an excellent choice for machining, forming, and welding, ideal for brackets, machine ways, and structural bracing. In stock for Los Angeles pickup. Learn More

1018 Cold Rolled Flat Bar, 1-1/2" wide by 1/4" thick, in a 144" length. Conforming to ASTM A108, this bar offers a tensile strength of 63,800 PSI, excellent machinability, and a smooth, scale-free surface. Its tight dimensional tolerances make it ideal for manufacturing brackets, base plates, and structural components requiring precision. In stock for immediate Los Angeles pickup. Learn More

A 2" x 1/4" 1018 Cold Rolled Steel Flat Bar in a 144" length. Conforming to ASTM A108, this versatile bar features a smooth, scale-free surface, tight dimensional tolerances, and excellent machinability. Its 63,800 PSI tensile strength makes it ideal for structural bracing, machine ways, and general fabrication where precision and a clean finish are required. In stock Los Angeles. Learn More

3" x 1/4" Cold Rolled Flat Bar in 1018 steel, 144" length. Conforms to ASTM A108 with 63,800 PSI tensile strength and excellent machinability. Its smooth, scale-free surface and tight tolerances make it ideal for fabrication. This medium-width bar is perfect for structural bracing, machine ways, and wear strips. In stock for same-day Los Angeles pickup. Learn More

4" x 1/4" Cold Rolled Flat Bar, 144" length, made from 1018 low-carbon steel. Conforms to ASTM A108 standards, offering 63,800 PSI tensile strength, tight dimensional tolerances, and a smooth, scale-free finish. Its excellent machinability and weldability make it a reliable choice. The large width is ideal for base plates, heavy structural components, and machine frames. In stock for same-day Los Angeles pickup. Learn More

3/4" x 5/16" 1018 Cold Rolled Steel Flat Bar, 144" length. Conforms to ASTM A108, providing 63,800 PSI tensile strength, a smooth surface finish, and tight dimensional tolerances. This grade offers good machinability and weldability. Its small profile is ideal for manufacturing precision brackets, straps, shims, and small frame components. In stock for Los Angeles pickup. Learn More

2" x 3/8" 1018 Cold Rolled Steel Flat Bar, 144" length. Conforms to ASTM A108 with 63,800 PSI tensile strength. This grade offers a smooth, scale-free finish, tight dimensional tolerances, and excellent machinability. Its medium width is ideal for structural bracing, machine ways, wear strips, and general fabrication projects requiring precision. In stock Los Angeles. Learn More

3/8" x 3" 1018 Cold Rolled Flat Bar, 144" length. Conforms to ASTM A108 specifications with 63,800 PSI tensile strength and a clean, scale-free surface. Its excellent machinability and tight dimensional tolerances make it a reliable choice for manufacturing. This medium-width bar is ideal for structural bracing, base plates, and machine components. In stock for Los Angeles pickup. Learn More

4" x 3/8" 1018 Cold Rolled Steel Flat Bar in a 144" length. This bar meets ASTM A108 standards, providing 63,800 PSI tensile strength, a smooth scale-free finish, and tight dimensional tolerances. Its large width makes it ideal for base plates, heavy structural bracing, and die components where precision and strength are required. In stock and available for same-day pickup in Los Angeles. Learn More

This 6 inch by 3/8 inch 1018 Cold Rolled Steel Flat Bar offers tight dimensional tolerances and a smooth, scale-free surface. Conforming to ASTM A108, it has a tensile strength of 63,800 PSI and excellent machinability. Its large width makes it ideal for base plates, structural gussets, and heavy equipment mounting. In stock for Los Angeles pickup. Learn More

1" x 1/2" 1018 Cold Rolled Steel Flat Bar in 144" lengths. This bar conforms to ASTM A108 and features a tensile strength of 63,800 PSI. The cold drawing process provides tight dimensional tolerances and a clean, scale-free surface, making it ideal for precision machining. A versatile choice for structural bracing, base plates, and custom machinery components. In stock Los Angeles. Learn More

1-1/4" x 1/2" Cold Rolled 1018 Steel Flat Bar, 144" length. Conforms to ASTM A108 with 63,800 PSI tensile strength. The cold drawing process provides a smooth, scale-free finish and tight dimensional tolerances, making it excellent for machining. This medium-width bar is ideal for structural bracing, machine ways, base plates, and mounting brackets. In stock for Los Angeles pickup. Learn More

1/2" x 2" 1018 Cold Rolled Flat Bar, 144" length. Conforms to ASTM A108, offering a smooth, scale-free finish and tight dimensional tolerances. With a tensile strength of 63,800 PSI and excellent machinability, it's ideal for manufacturing brackets, base plates, and machine ways where precision is required. In stock for immediate Los Angeles pickup. Learn More

6" x 1/2" 1018 Cold Rolled Steel Flat Bar, 144" length. Conforms to ASTM A108 with 63,800 PSI tensile strength and excellent machinability. The cold drawing process provides tight dimensional tolerances and a smooth, scale-free finish. Its substantial 6-inch width makes it ideal for base plates, heavy structural components, and die sets. In stock for Los Angeles pickup. Learn More

3" x 3/4" 1018 Cold Rolled Steel Flat Bar, 144" length. Conforms to ASTM A108. Features a smooth, scale-free surface, tight tolerances, and excellent machinability. With 63,800 PSI tensile strength, it's ideal for base plates, brackets, and fixtures. This medium-width bar provides robust structural support for fabrication and machinery projects. In stock Los Angeles. Learn More