Search results for: 'steel hot rolled steel sheet'

1" diameter Cold Rolled All Thread Rod in 120" (10 ft) lengths. Made from 1018 steel with an oil finish for rust prevention, this rod meets ASTM A307 Grade A strength requirements with a 60,000 PSI tensile strength. The continuous threading provides versatile fastening for construction, manufacturing, and general repair. Easily cut to custom lengths. In stock for Los Angeles pickup. Learn More

1/8" diameter 304 Stainless Steel Round Bar, 144" length. Conforms to ASTM A276, this versatile austenitic grade offers excellent corrosion resistance and weldability. Its 73,200 PSI tensile strength makes it suitable for a wide range of applications. The small diameter is ideal for pins, fastener blanks, and precision components in food processing and architectural projects. In stock for Los Angeles pickup. Learn More

5/16" x 5/16" 304 Stainless Steel Square Bar, available in 144" lengths. Certified to ASTM A276, this bar provides a tensile strength of 73,200 PSI with excellent weldability and corrosion resistance. Its small profile is ideal for light structural supports, braces, frames, and decorative architectural work. This versatile, non-magnetic bar is ready for fabrication. In stock for Los Angeles pickup. Learn More

7/16" diameter 304 Stainless Steel Round Bar, 144" length. Conforms to ASTM A276, this versatile bar offers 73,200 PSI tensile strength, excellent corrosion resistance, and superior weldability. Its non-magnetic properties make it suitable for a wide range of applications. This small diameter is ideal for pins, dowels, fastener blanks, and small shafts. In stock for Los Angeles pickup. Learn More

1/4" x 1/4" 304 Stainless Steel Square Bar, 144" length. Conforms to ASTM A276, offering excellent corrosion resistance and weldability with 73,200 PSI tensile strength. This austenitic, non-magnetic grade is ideal for structural supports, frames, shafts, and food processing equipment where sanitation is critical. Its small profile is suited for light-duty braces and mounting hardware. In stock for Los Angeles pickup. Learn More

1/2" x 1/2" 1018 Cold Rolled Square Bar in 144" lengths. Produced to ASTM A108 standards, this low-carbon steel offers a clean surface, tight dimensional tolerances, and excellent machinability. With a tensile strength of 63,800 PSI, it is ideal for medium-duty applications like shafts, fixtures, and precision machined components where a superior finish is required. In stock for Los Angeles pickup. Learn More

1-1/2" diameter 304 Stainless Steel Round Bar in 144" lengths. This versatile austenitic stainless steel conforms to ASTM A276 and offers a tensile strength of 73,200 PSI. Its excellent corrosion resistance and weldability make it a standard for machined components, shafts, architectural elements, and food processing equipment. This medium-diameter bar is ideal for structural and mechanical applications. In stock for Los Angeles pickup. Learn More

1/4 inch diameter Cold Rolled All Thread Rod with a zinc plated finish for corrosion resistance. Continuous threading along its 120-inch length provides versatile fastening. Made from low-carbon steel conforming to ASTM A307 strength requirements, it offers 63,800 PSI tensile strength. Ideal for light-duty bracing, suspending conduit, and creating custom-length fasteners. In stock for same-day Los Angeles pickup. Learn More

This 1-1/4" x 1-1/4" x 1/4" Type 304 Stainless Steel Angle conforms to ASTM A276. It provides a tensile strength of 73,200 PSI, excellent corrosion resistance, and superior weldability. Its small leg size makes it ideal for light structural supports, brackets, corner guards, and architectural trim. In stock Los Angeles. Learn More

This 3/8 inch diameter Cold Rolled All Thread Rod is supplied in a 10 foot length with a zinc-plated finish for moderate corrosion resistance. Made from low-carbon steel, it meets the strength requirements of ASTM A307 Grade A, providing a typical tensile strength of 63,800 PSI. Its continuous threading makes it ideal for versatile fastening, anchoring, bracing, and support applications. In stock for Los Angeles pickup. Learn More

1-1/4" diameter 1018 Cold Rolled Round Bar, 144" length. Conforming to ASTM A108, this general-purpose steel has 63,800 PSI tensile strength and excellent machinability. The cold drawn process provides a smooth, scale-free finish and tight dimensional tolerances, making it ideal for shafts, axles, and precision machined components. In stock for Los Angeles pickup. Learn More

1-5/8" OD x 0.065" wall Type 304 Stainless Steel Round Tube, 20-foot length, with a 180 grit polished finish. This versatile austenitic stainless steel meets ASTM A269 standards and offers 73,200 PSI tensile strength, excellent corrosion resistance, and superior weldability. Its medium diameter is ideal for architectural handrails, food processing equipment frames, and marine hardware. In stock for immediate Los Angeles pickup. Learn More

7/8 inch diameter Cold Rolled All Thread Rod, 120" length, with an oil finish for rust prevention. Conforming to the strength requirements of ASTM A307 Grade A, this rod is made from low-carbon steel offering 63,800 PSI tensile strength. Its continuous threading provides versatile fastening for construction, manufacturing, and general repair. In stock for immediate Los Angeles pickup. Learn More

2-1/2" x 2-1/2" x 3/16" 304 Stainless Steel Angle, available in 20-foot lengths. This versatile austenitic stainless angle conforms to ASTM A276, offering 73,200 PSI tensile strength, excellent corrosion resistance, and superior weldability. Its medium size is ideal for structural framing, equipment bases, shelving, and architectural trim where both strength and a clean finish are required. In stock for Los Angeles pickup. Learn More

5/8" diameter Cold Rolled All Thread Rod in a 10 ft length, featuring a zinc-plated finish for corrosion resistance. Made from low-carbon steel that meets the strength requirements of ASTM A307 Grade A. Offers good weldability and strength for general-purpose fastening, bracing, and support applications in construction and manufacturing. In stock for immediate Los Angeles pickup. Learn More

3/4 inch diameter Cold Rolled All Thread Rod in a 120-inch length with a zinc-plated finish for corrosion resistance. Manufactured from low-carbon steel, its strength conforms to ASTM A307 Grade A with a typical tensile strength of 63,800 PSI. This versatile, continuously threaded rod is ideal for general-purpose fastening, bracing, and anchoring applications in construction and industrial settings. In stock Los Angeles. Learn More

1-1/4" x 1-1/4" x 3/16" 304 Stainless Steel Angle, sold in 240-inch lengths. Conforming to ASTM A276, this versatile austenitic grade offers excellent corrosion resistance and weldability with a tensile strength of 73,200 PSI. Its small profile is ideal for creating light structural frames, mounting brackets, corner guards, and architectural trim. In stock for Los Angeles pickup. Learn More

3/4" diameter Cold Rolled All Thread Rod in 10-foot lengths with a standard oil finish. Made from low-carbon steel, this rod offers good strength (approx. 63,800 PSI tensile) and conforms to ASTM A307 Grade A strength requirements. The continuous threading provides versatile performance for anchoring, fastening, bracing, and suspending systems in construction and manufacturing. In stock for same-day Los Angeles pickup. Learn More

This 5" x 5" Heavy Duty Square Steel Base Plate is engineered from high-strength carbon steel for maximum durability. It comes pre-drilled for secure anchoring in structural and fabrication applications. Designed for compatibility with common industrial fastening systems like ASTM A307. Learn More

3" x 1/2" 1018 Cold Rolled Flat Bar in 144" lengths. Conforms to ASTM A108 and features a tensile strength of 63,800 PSI. This grade offers excellent machinability and good weldability combined with a smooth, scale-free surface. Its medium width is ideal for structural bracing, machine ways, and durable base plates. In stock for immediate Los Angeles pickup. Learn More

1" OD x 0.065" wall 304 Stainless Steel Round Tube with a 180 grit polished finish. This versatile tubing conforms to ASTM A269, delivering 73,200 PSI tensile strength, excellent weldability, and superior corrosion resistance. Its medium diameter is ideal for architectural handrails, food processing equipment, frames, and decorative applications where a clean, aesthetic finish is required. In stock for immediate Los Angeles pickup. Learn More

This 8" x 8" heavy-duty square steel base plate provides a robust foundation for structural and industrial applications. Made from high-strength carbon steel, it features pre-drilled holes for compatibility with heavy-duty fasteners meeting SAE J429 and ASTM standards. Learn More

1/2" x 2" 1018 Cold Rolled Flat Bar, 144" length. Conforms to ASTM A108, offering a smooth, scale-free finish and tight dimensional tolerances. With a tensile strength of 63,800 PSI and excellent machinability, it's ideal for manufacturing brackets, base plates, and machine ways where precision is required. In stock for immediate Los Angeles pickup. Learn More

1" x 1" 304 Stainless Steel Square Tube with a 0.065" wall and 180 grit satin finish. This tube conforms to ASTM A269, delivering 73,200 PSI tensile strength, excellent corrosion resistance, and superior weldability. Its structural efficiency and aesthetic finish make it ideal for architectural handrails, support frames, food service equipment, and decorative applications. In stock for immediate Los Angeles pickup. Learn More

1018 Cold Rolled Flat Bar measuring 1" wide by 1/4" thick in a 144" length. This versatile bar conforms to ASTM A108 and features a tensile strength of 63,800 PSI. Its cold-drawn finish provides tight dimensional tolerances and excellent machinability, making it ideal for structural bracing, brackets, and machine components. In stock for same-day Los Angeles pickup. Learn More

2-1/2" diameter 304 Stainless Steel Round Bar, 144" length. Conforms to ASTM A276 with 73,200 PSI tensile strength, excellent weldability, and remarkable corrosion resistance. Its large diameter makes it ideal for heavy-duty shafts, forging stock, and large machined structural components where strength and durability are critical. In stock for Los Angeles pickup. Learn More

1/2" NPS Schedule 40 Stainless Steel Pipe, 240" length. This 304 stainless steel pipe conforms to ASTM A312 and has a tensile strength of 73,200 PSI. It combines excellent corrosion resistance and weldability, making it a standard for fluid and gas transport. The small diameter is ideal for instrumentation lines, conduit, and small-scale process piping. In stock for Los Angeles pickup. Learn More

This 4" x 4" Heavy Duty Square Steel Base Plate is a robust mounting solution for structural applications. Made from industrial-grade flat steel and pre-drilled with holes for easy anchoring, it provides a stable foundation for posts, columns, and machinery. Ideal for fabrication and construction projects requiring a durable mounting point. Learn More

1" NPS Schedule 40 pipe manufactured from 304 stainless steel, supplied in a 240" (20 ft) length. Conforming to ASTM A312, it provides excellent weldability and corrosion resistance with a tensile strength of 73,200 PSI. This versatile size is ideal for fluid transport, industrial plumbing, and structural applications like handrails and support posts. In stock for Los Angeles pickup. Learn More

1" x 3/16" 1018 Cold Rolled Steel Flat Bar, 144" length. Conforms to ASTM A108, delivering 63,800 PSI tensile strength and a smooth, scale-free finish. Known for excellent machinability and weldability, this medium-width bar is a versatile choice for fabricating brackets, machine ways, and structural bracing. In stock for immediate Los Angeles pickup. Learn More

5-inch Nominal Pipe Size (NPS) 304 Stainless Steel Pipe, Schedule 10 wall, in 240-inch lengths. Conforming to ASTM A312, this pipe provides excellent corrosion resistance and weldability. With a tensile strength of 73,200 PSI, it is ideal for large-scale fluid transport, industrial process lines, and structural applications requiring strength and longevity. In stock for Los Angeles pickup. Learn More

1-3/8" diameter 304 Stainless Steel Round Bar, 144" length. Conforms to ASTM A276, this versatile austenitic grade provides 73,200 PSI tensile strength and excellent corrosion resistance. Its weldability and formability make it a standard for general-purpose applications. The medium diameter is ideal for shafts, axles, spacers, and architectural components. In stock for Los Angeles pickup. Learn More

This 6 inch by 3/8 inch 1018 Cold Rolled Steel Flat Bar offers tight dimensional tolerances and a smooth, scale-free surface. Conforming to ASTM A108, it has a tensile strength of 63,800 PSI and excellent machinability. Its large width makes it ideal for base plates, structural gussets, and heavy equipment mounting. In stock for Los Angeles pickup. Learn More

A 2" x 1/4" 1018 Cold Rolled Steel Flat Bar in a 144" length. Conforming to ASTM A108, this versatile bar features a smooth, scale-free surface, tight dimensional tolerances, and excellent machinability. Its 63,800 PSI tensile strength makes it ideal for structural bracing, machine ways, and general fabrication where precision and a clean finish are required. In stock Los Angeles. Learn More

2" x 1" 1018 Cold Rolled Steel Flat Bar, 144" length. Conforms to ASTM A108 with a tensile strength of 63,800 PSI and a smooth, scale-free surface. This material offers excellent machinability and tight dimensional tolerances, making it ideal for precision applications like machine ways, mounting brackets, and structural bracing. In stock for same-day Los Angeles pickup. Learn More

3" x 5/8" 1018 Cold Rolled Steel Flat Bar, 144" length. Conforms to ASTM A108 with 63,800 PSI tensile strength, excellent machinability, and superior dimensional tolerances. Its smooth, scale-free surface is ideal for painting or plating. This medium-width bar is used for structural bracing, machine ways, and base plates. In stock for same-day Los Angeles pickup. Learn More

1-1/2" OD x 0.065" wall 304 Stainless Steel Round Tube, supplied in 20-foot lengths. Conforms to ASTM A269, featuring a 73,200 PSI tensile strength, excellent weldability, and corrosion resistance. The 180 grit polished finish provides a clean, decorative appearance ideal for architectural handrails, equipment frames, and structural supports. In stock for immediate Los Angeles pickup. Learn More

1-1/4" x 1-1/4" Stainless Steel Square Tube with a 0.120" wall and 180 grit satin finish. This 304 grade tube conforms to ASTM A269 and features 73,200 PSI tensile strength, excellent weldability, and corrosion resistance. Its medium size is ideal for structural frames, architectural handrails, and support columns. In stock for same-day cutting and pickup in Los Angeles. Learn More

A 4" wide by 1/8" thick 1018 Cold Rolled Steel Flat Bar, supplied in a 144" length. This bar meets ASTM A108 standards and features 63,800 PSI tensile strength, tight dimensional tolerances, and good weldability. The cold drawn finish provides a smooth, scale-free surface ideal for machining. Its large width makes it suitable for base plates, structural supports, and die components. In stock Los Angeles. Learn More

1" x 1/2" 1018 Cold Rolled Steel Flat Bar in 144" lengths. This bar conforms to ASTM A108 and features a tensile strength of 63,800 PSI. The cold drawing process provides tight dimensional tolerances and a clean, scale-free surface, making it ideal for precision machining. A versatile choice for structural bracing, base plates, and custom machinery components. In stock Los Angeles. Learn More

4" x 3/8" 1018 Cold Rolled Steel Flat Bar in a 144" length. This bar meets ASTM A108 standards, providing 63,800 PSI tensile strength, a smooth scale-free finish, and tight dimensional tolerances. Its large width makes it ideal for base plates, heavy structural bracing, and die components where precision and strength are required. In stock and available for same-day pickup in Los Angeles. Learn More

1/8" x 1/4" 1018 Cold Rolled Steel Flat Bar, 144" length. Conforms to ASTM A108 with 63,800 PSI tensile strength, good weldability, and a 70% machinability rating. The cold drawn process provides a smooth, scale-free finish and tight dimensional tolerances. Its small profile is ideal for brackets, shims, straps, and small frame stock. In stock for Los Angeles pickup. Learn More

1018 Cold Rolled Flat Bar, 1-1/2" wide by 1/4" thick, in a 144" length. Conforming to ASTM A108, this bar offers a tensile strength of 63,800 PSI, excellent machinability, and a smooth, scale-free surface. Its tight dimensional tolerances make it ideal for manufacturing brackets, base plates, and structural components requiring precision. In stock for immediate Los Angeles pickup. Learn More

1" x 3/8" 1018 Cold Rolled Steel Flat Bar, 144" length. Conforms to ASTM A108 with 63,800 PSI tensile strength and excellent machinability. The cold drawing process provides a smooth, scale-free surface and tight dimensional tolerances. Ideal for base plates, mounting brackets, and machine components requiring precision without extensive finishing. In stock for Los Angeles pickup. Learn More

1018 Cold Rolled Steel Flat Bar, measuring 1" wide by 3/4" thick in a 144" length. Conforms to ASTM A108 and offers 63,800 PSI tensile strength. The cold drawn process provides tight dimensional tolerances and a clean, smooth surface ideal for machining and welding. Excellent for fabricating brackets, base plates, and machine components. In stock Los Angeles. Learn More

5" x 1/8" 1018 Cold Rolled Flat Bar, 144" length. Conforming to ASTM A108, this low-carbon steel offers a smooth, scale-free finish and tight dimensional tolerances. It has a tensile strength of 63,800 PSI and excellent machinability. The wide 5-inch profile is ideal for base plates, heavy structural bracing, and die components. In stock for Los Angeles pickup. Learn More

1/8" x 1/2" 1018 Cold Rolled Steel Flat Bar, 144" length. Conforms to ASTM A108 with 63,800 PSI tensile strength and a smooth, scale-free finish. This grade offers excellent machinability and weldability, making its small profile ideal for fabricating custom brackets, straps, shims, and support braces. In stock for immediate Los Angeles pickup. Learn More

A 4" x 1/2" 1018 Cold Rolled Steel Flat Bar, supplied in 144" lengths. Conforming to ASTM A108, this bar features a 63,800 PSI tensile strength, tight dimensional tolerances, and excellent machinability. The smooth, scale-free surface is ready for fabrication. Its substantial width makes it ideal for base plates, heavy structural bracing, and die components. In stock for Los Angeles pickup. Learn More

1" x 1/8" 1018 Cold Rolled Steel Flat Bar, 144" length. Conforms to ASTM A108, offering 63,800 PSI tensile strength and excellent machinability (70%). The cold drawn process provides a smooth, scale-free finish and tight dimensional tolerances. This medium-width bar is ideal for structural bracing, machine ways, and wear strips where precision is key. In stock for Los Angeles pickup. Learn More

A 3/16" x 4" Cold Rolled 1018 Steel Flat Bar, 144 inches long. Produced to ASTM A108 standards, this bar provides a tensile strength of 63,800 PSI, tight dimensional tolerances, and excellent machinability. The smooth, scale-free surface is ideal for applications requiring a clean finish. Suitable for base plates, structural components, and machine parts. In stock Los Angeles. Learn More

3/16" x 3" 1018 Cold Rolled Steel Flat Bar, 144" length. Conforms to ASTM A108 with 63,800 PSI tensile strength, superior dimensional tolerance, and a clean, smooth surface. It offers a good balance of strength, weldability, and excellent machinability. This medium-width bar is ideal for structural bracing, machine ways, and base plates. In stock for Los Angeles pickup. Learn More

6" x 1/2" 1018 Cold Rolled Steel Flat Bar, 144" length. Conforms to ASTM A108 with 63,800 PSI tensile strength and excellent machinability. The cold drawing process provides tight dimensional tolerances and a smooth, scale-free finish. Its substantial 6-inch width makes it ideal for base plates, heavy structural components, and die sets. In stock for Los Angeles pickup. Learn More

1-1/2" x 3/8" 1018 Cold Rolled Flat Bar in 144" lengths. Conforms to ASTM A108, delivering 63,800 PSI tensile strength with excellent machinability. The cold drawn process provides a smooth, scale-free finish and tight dimensional tolerances. This medium width is ideal for structural bracing, machine ways, base plates, and custom fabrication projects. In stock for Los Angeles pickup. Learn More

3/16" x 1/2" 1018 Cold Rolled Steel Flat Bar, 144" length. Conforms to ASTM A108 with 63,800 PSI tensile strength and excellent machinability. The smooth, scale-free surface and tight dimensional tolerances make it ideal for fabrication of small parts like brackets, straps, and shims that require a clean finish and precision. In stock for Los Angeles pickup. Learn More

1/2" x 3/4" 1018 Cold Rolled Steel Flat Bar, sold in 144" lengths. This product meets ASTM A108 specifications and offers 63,800 PSI tensile strength, a smooth surface finish, and tight dimensional tolerances. Its excellent machinability and good weldability make it a versatile choice. The small profile is ideal for brackets, straps, and shims. In stock for Los Angeles pickup. Learn More

1-1/4" x 1/8" 1018 Cold Rolled Steel Flat Bar, sold in 144" lengths. This bar meets ASTM A108 standards, offering 63,800 PSI tensile strength, tight dimensional tolerances, and a smooth, scale-free finish. Its excellent machinability and weldability make it a versatile choice for fabricating brackets, machine ways, and structural bracing. In stock for Los Angeles pickup. Learn More

1-1/4" x 1/2" Cold Rolled 1018 Steel Flat Bar, 144" length. Conforms to ASTM A108 with 63,800 PSI tensile strength. The cold drawing process provides a smooth, scale-free finish and tight dimensional tolerances, making it excellent for machining. This medium-width bar is ideal for structural bracing, machine ways, base plates, and mounting brackets. In stock for Los Angeles pickup. Learn More

3/4" x 1/4" Cold Rolled Flat Bar in 1018 grade steel, sold in 144" lengths. Conforms to ASTM A108 with 63,800 PSI tensile strength and excellent machinability. The cold drawing process provides tight dimensional tolerances and a smooth, scale-free surface. This small-profile bar is ideal for manufacturing precision brackets, straps, and small machine components. In stock for same-day Los Angeles pickup. Learn More

4" x 4" x 0.120" wall 304 Stainless Steel Square Tube, 240" length. Meets ASTM A269 specifications. This large structural tube offers 73,200 PSI tensile strength, excellent corrosion resistance, and superior weldability. Its substantial size is ideal for heavy-duty applications like structural columns, industrial supports, and large equipment frames. In stock for same-day cutting and pickup in Los Angeles. Learn More

3/4" NPS Schedule 40 pipe in 304 stainless steel. This pipe conforms to ASTM A312 and provides excellent corrosion resistance and weldability for demanding applications. With a tensile strength of 73,200 PSI, it is a reliable choice for fluid and gas transport in food processing, chemical plants, and water treatment systems. Ideal for instrumentation lines and small-scale process piping. In stock Los Angeles. Learn More

1-1/4" OD x 0.120" wall 304 Stainless Steel Round Tube. Conforms to ASTM A269, featuring 73,200 PSI tensile strength, excellent weldability, and corrosion resistance. Polished to a 180 grit finish for architectural and decorative applications. Medium diameter is ideal for handrails, equipment frames, and structural supports. Available for same-day pickup in Los Angeles. Learn More

1018 Cold Rolled Steel Flat Bar, measuring 1/4" thick by 1-3/4" wide. This bar conforms to ASTM A108 and offers superior dimensional accuracy and a smooth, scale-free surface due to the cold drawing process. With 63,800 PSI tensile strength, its medium size is ideal for manufacturing base plates, mounting brackets, and structural components requiring precision. In stock for immediate Los Angeles pickup. Learn More

1-1/2 inch OD Type 304 Stainless Steel Round Tube with a 0.120 inch wall and a 180 grit polished finish. Conforms to ASTM A269, offering 73,200 PSI tensile strength, excellent weldability, and strong corrosion resistance. This medium-sized tube is ideal for architectural handrails, food service equipment, and marine hardware. In stock for Los Angeles pickup. Learn More

1018 Cold Rolled Steel Flat Bar, 1-1/4" wide by 1/4" thick in 144" lengths. This bar conforms to ASTM A108 and offers a tensile strength of 63,800 PSI. The cold drawing process provides tight dimensional tolerances and a smooth, scale-free surface. It's an excellent choice for machining, forming, and welding, ideal for brackets, machine ways, and structural bracing. In stock for Los Angeles pickup. Learn More

1/4" diameter 1018 Cold Rolled Round Bar, 144" length. Conforms to ASTM A108 with 63,800 PSI tensile strength and excellent machinability. This cold drawn bar has tight tolerances and a smooth finish, ideal for small shafts, pins, dowels, and fastener blanks. In stock for Los Angeles pickup. Learn More

3/16" diameter 1018 Cold Rolled Round Bar, sold in 144" lengths. Conforms to ASTM A108 with 63,800 PSI tensile strength and excellent machinability. The cold drawing process provides tight dimensional tolerances and a smooth, clean finish. This small-diameter rod is ideal for manufacturing pins, dowels, small shafts, and fastener blanks. In stock for Los Angeles pickup. Learn More

1-inch diameter Cold Rolled All Thread Rod in a 120-inch length with a zinc plated finish. This rod meets ASTM A307 Grade A strength requirements, with a base material tensile strength of 63,800 PSI. The zinc plating provides good corrosion resistance for general-purpose fastening, anchoring systems, and suspending HVAC fixtures. In stock for immediate Los Angeles pickup. Learn More

7/16 inch diameter 1018 Cold Rolled Round Bar in 144-inch lengths. Produced to ASTM A108 standards, this bar offers 53,700 PSI yield strength, excellent machinability, and a smooth, scale-free surface. Its tight dimensional tolerances make it ideal for high-precision applications. This small diameter is perfect for manufacturing dowel pins, small shafts, and fastener blanks. In stock for immediate Los Angeles pickup. Learn More

1-1/2" nominal pipe size (NPS) 304 Stainless Steel Pipe, Schedule 40 x 20' length. Conforms to ASTM A312, offering excellent corrosion resistance and 73,200 PSI tensile strength. This medium-sized pipe is ideal for plumbing mains, process piping, and structural posts where durability and reliability are essential. In stock for same-day cutting and pickup in Los Angeles. Learn More

Protects steel surfaces with a high-purity, zinc-rich coating. This cold galvanized primer provides sacrificial, long-lasting corrosion resistance comparable to hot-dip galvanizing. The fast-drying formula is ideal for repairing damaged galvanized surfaces, protecting welds, and as a durable base coat for painting. In stock for immediate pickup in Los Angeles. Learn More

3/4" wide by 3/8" thick 304 Stainless Steel Flat Bar, 144" length. Conforming to ASTM A276, this austenitic stainless steel offers excellent corrosion resistance and weldability with 73,200 PSI tensile strength. Its versatile rectangular profile is ideal for small structural supports, food processing equipment framework, architectural trim, and general fabrication projects. In stock for same-day Los Angeles pickup. Learn More

4" x 1/8" 304 Stainless Steel Flat Bar, 144" length. Conforming to ASTM A276, this austenitic grade offers 73,200 PSI tensile strength and excellent corrosion resistance. Its strength and superior weldability make it a top choice for fabrication. This large width is ideal for base plates, heavy structural supports, and die components. In stock for Los Angeles pickup. Learn More

2" x 1/2" 304 Stainless Steel Flat Bar, 144" length. This versatile bar conforms to ASTM A276 and offers an excellent combination of strength, with 73,200 PSI tensile, and corrosion resistance. Its medium profile is ideal for structural bracing, machine ways, supports, and general fabrication. Excellent weldability and formability allow for complex designs. In stock for same-day Los Angeles pickup. Learn More

Our 3" x 3" Heavy Duty Square Steel Base Plate is a robust mounting solution for structural applications. Made from high-strength, weldable low-carbon steel, it features pre-drilled holes for secure anchoring. Ideal for fencing, posts, and equipment support. Learn More

3" x 3/8" 304 Stainless Steel Flat Bar, 144" length. Conforms to ASTM A276, this austenitic grade provides 73,200 PSI tensile strength, excellent corrosion resistance, and superior weldability. Its versatile rectangular profile is ideal for structural bracing, equipment framework, food processing components, and architectural trim. In stock for immediate cutting and Los Angeles pickup. Learn More

304 Stainless Steel Flat Bar measuring 2" wide by 3/16" thick, in a 144" length. This versatile bar meets ASTM A276 standards and offers 73,200 PSI tensile strength, excellent corrosion resistance, and superior weldability. Its medium size is ideal for structural bracing, machine components, food equipment frames, and architectural trim. In stock for same-day Los Angeles pickup. Learn More

304 Stainless Steel Flat Bar measuring 3" wide by 1/4" thick in a 144" length. Certified to ASTM A276, this versatile bar offers 73,200 PSI tensile strength, excellent corrosion resistance, and superior weldability. Its medium size is ideal for fabricating structural braces, supports, base plates, and components for food processing equipment. In stock Los Angeles. Learn More

3" x 1/2" 304 Stainless Steel Flat Bar, 144" length. Conforms to ASTM A276. This versatile austenitic stainless offers excellent corrosion resistance and weldability with 73,200 PSI tensile strength. Its medium size is ideal for structural bracing, machine ways, wear strips, and architectural trim. In stock and ready for same-day pickup in Los Angeles. Learn More

A 4" wide by 1/2" thick 304 Stainless Steel Flat Bar, supplied in 144" lengths. This versatile austenitic grade conforms to ASTM A276 and delivers 73,200 PSI tensile strength with excellent corrosion resistance and weldability. Its substantial cross-section is ideal for structural supports, base plates, heavy brackets, and industrial equipment frames. In stock for Los Angeles pickup. Learn More

2" OD 304 Stainless Steel Round Tube with a 0.065" wall thickness, in 240" lengths. This versatile tube meets ASTM A269 standards and offers 73,200 PSI tensile strength, combining excellent corrosion resistance with superior weldability. Its 180 grit polished finish makes it ideal for architectural applications like handrails, decorative frameworks, and restaurant equipment. In stock for Los Angeles pickup. Learn More

A 26 Gauge x 36" x 240" Galvanized PBR Panel, manufactured to ASTM A653 standards. Features a protective zinc coating applied via a hot-dip process for excellent corrosion and rust resistance. The underlying steel provides up to 80,000 PSI tensile strength. Ideal for residential roofing, commercial siding, and agricultural structures. In stock Los Angeles. Learn More

4" x 3/16" 304 Stainless Steel Flat Bar in 144" lengths. Conforming to ASTM A276, this versatile alloy offers 73,200 PSI tensile strength, excellent corrosion resistance, and superior weldability. Its large width is ideal for manufacturing base plates, heavy structural supports, die components, and durable braces where strength and longevity are critical. In stock and ready for same-day pickup in Los Angeles. Learn More

1/8" thick by 1" wide 304 Stainless Steel Flat Bar, 144" length. Conforms to ASTM A276, this versatile austenitic stainless offers excellent corrosion resistance, high ductility, and superior weldability. Its 73,200 PSI tensile strength makes it ideal for structural supports, braces, and framework in food processing, architectural, and general fabrication applications. In stock for immediate pickup in Los Angeles. Learn More

2" x 1/8" 304 Stainless Steel Flat Bar in 144" lengths. Conforming to ASTM A276, this bar delivers 73,200 PSI tensile strength with excellent corrosion resistance and weldability. Its versatile medium width is ideal for structural bracing, equipment framework, base plates, and architectural trim. Most stock is dual-certified 304/304L. In stock for same-day Los Angeles pickup. Learn More

304 Stainless Steel Flat Bar with a 3-inch width and 1/8-inch thickness, sold in 144-inch lengths. Conforming to ASTM A276, this bar provides 73,200 PSI tensile strength, excellent corrosion resistance, and superior weldability. Its versatile size is ideal for structural braces, equipment framework, base plates, and general fabrication projects. In stock for immediate pickup in Los Angeles. Learn More

This 1/4" x 1" 304 Stainless Steel Flat Bar is a versatile, corrosion-resistant material conforming to ASTM A276. It offers 73,200 PSI tensile strength, excellent weldability, and superior formability. This medium-width bar is ideal for manufacturing structural bracing, machine ways, support brackets, and food processing equipment components. In stock for same-day cutting and Los Angeles pickup. Learn More

6" wide by 1/4" thick 304 Stainless Steel Flat Bar in a 144" length. Conforming to ASTM A276, this bar provides excellent corrosion resistance and weldability for demanding environments. With a tensile strength of 73,200 PSI, this large-profile bar is ideal for structural supports, base plates, and heavy-duty fabrication projects. In stock for immediate Los Angeles pickup. Learn More

A 1" x 3/8" 304 Stainless Steel Flat Bar, 144" in length. This versatile bar meets ASTM A276 standards and offers 73,200 PSI tensile strength, excellent corrosion resistance, and superior weldability. Its medium size is ideal for structural bracing, machine components, supports, and general fabrication projects requiring strength and longevity. In stock for same-day pickup in Los Angeles. Learn More

4" x 3/8" 304 Stainless Steel Flat Bar, 144" length. Conforms to ASTM A276, delivering excellent corrosion resistance, high ductility, and superior weldability. With a tensile strength of 73,200 PSI, this large-format flat bar is ideal for manufacturing base plates, heavy structural supports, die components, and equipment framework. In stock for immediate cutting and pickup in Los Angeles. Learn More

2" x 2" x 0.065" wall 304 Stainless Steel Square Tube, 240" length. With a 180 grit satin finish, this tube conforms to ASTM A269 and provides 73,200 PSI tensile strength. It combines excellent corrosion resistance and weldability, ideal for architectural applications like handrails, guardrails, and decorative trim where a clean, polished appearance is required. In stock for immediate Los Angeles pickup. Learn More

5" x 1/4" 304 Stainless Steel Flat Bar, 144" length. Conforms to ASTM A276 with 73,200 PSI tensile strength, excellent weldability, and superior corrosion resistance. This versatile austenitic stainless grade is non-magnetic in the annealed condition. Its large profile is ideal for heavy structural supports, base plates, gussets, and food processing equipment framework. In stock for Los Angeles pickup. Learn More

304 Stainless Steel Flat Bar, 1" wide by 3/16" thick. Conforming to ASTM A276, this bar offers a versatile combination of excellent corrosion resistance, high ductility, and superior weldability. Its 73,200 PSI tensile strength makes it ideal for structural bracing, equipment frames, and architectural trim. This medium-sized bar is a reliable choice for fabrication projects. In stock for immediate Los Angeles pickup. Learn More

304 Stainless Steel Flat Bar, 2 inches wide by 1/4 inch thick, in a 144-inch length. This versatile bar conforms to ASTM A276, offering excellent corrosion resistance and 73,200 PSI tensile strength. Its medium size is ideal for structural bracing, equipment framework, and architectural trim. Excellent weldability and ductility make it a top choice for fabrication projects. In stock for Los Angeles pickup. Learn More

A versatile 2 Inch by 3/8 Inch 304 Stainless Steel Flat Bar, 144 inches long. This bar meets ASTM A276 standards and offers an excellent combination of corrosion resistance, strength, and weldability with a tensile strength of 73,200 PSI. Its medium width makes it ideal for structural bracing, machine ways, framework, and food processing equipment. Available for same-day pickup in Los Angeles. Learn More

1/2" x 1" 304 Stainless Steel Flat Bar in 144" lengths. Conforming to ASTM A276, this versatile bar offers 73,200 PSI tensile strength, excellent corrosion resistance, and superior weldability. Its rectangular profile is ideal for structural bracing, equipment frames, and architectural trim. The medium size provides a good balance of strength and workability for fabricators and machinists. In stock for Los Angeles pickup. Learn More

1-1/2" OD 304 Stainless Steel Round Tube with a 0.120" wall, 240" length. Compliant with ASTM A269, this tubing combines 73,200 PSI tensile strength with excellent weldability and corrosion resistance. Its medium diameter is ideal for structural and decorative uses like handrails, equipment frames, and architectural supports. Easy to clean and finish, it's a versatile choice for fabrication projects. In stock for Los Angeles pickup. Learn More

This 1018 Cold Rolled Flat Bar measures 6 inches wide by 3/16 inch thick, in a 144-inch length. Conforming to ASTM A108, it provides a smooth, scale-free surface, tight dimensional tolerances, and excellent machinability. Its 63,800 PSI tensile strength makes it ideal for manufacturing base plates, heavy structural bracing, and die components. In stock for same-day Los Angeles pickup. Learn More

3/4" x 1/8" 304 Stainless Steel Flat Bar, sold in 144" lengths. This versatile bar meets ASTM A276 specifications and provides excellent corrosion resistance and weldability. Its 73,200 PSI tensile strength makes it a reliable choice for general fabrication. The small profile is ideal for creating custom brackets, support straps, and decorative trim. In stock for same-day Los Angeles pickup. Learn More

2" x 1" x 0.120" wall 304 Stainless Steel Rectangular Tube. This versatile tubing meets ASTM A269 and A554 standards, delivering 73,200 PSI tensile strength with excellent corrosion resistance and weldability. Its balanced properties and high strength-to-weight ratio make it ideal for structural framing, architectural applications, and equipment supports. In stock for immediate pickup in Los Angeles. Learn More

304 Stainless Steel Flat Bar, 3/16" thick by 1/2" wide in 144" lengths. This versatile bar conforms to ASTM A276 and offers a tensile strength of 73,200 PSI. Its excellent corrosion resistance and weldability make it a standard for fabrication. The small profile is ideal for creating support brackets, trim, straps, and decorative elements. In stock for Los Angeles pickup. Learn More