Search results for: 'This Series'

This 3/8" x 1-1/2" 304 Stainless Steel Flat Bar is a versatile, general-purpose alloy conforming to ASTM A276. It provides 73,200 PSI tensile strength, excellent resistance to corrosion, and superior weldability. Its medium profile is ideal for structural bracing, machine ways, support brackets, and general fabrication projects. In stock and available for same-day pickup in Los Angeles. Learn More

1/2" x 1" 304 Stainless Steel Flat Bar in 144" lengths. Conforming to ASTM A276, this versatile bar offers 73,200 PSI tensile strength, excellent corrosion resistance, and superior weldability. Its rectangular profile is ideal for structural bracing, equipment frames, and architectural trim. The medium size provides a good balance of strength and workability for fabricators and machinists. In stock for Los Angeles pickup. Learn More

A 4" wide by 1/2" thick 304 Stainless Steel Flat Bar, supplied in 144" lengths. This versatile austenitic grade conforms to ASTM A276 and delivers 73,200 PSI tensile strength with excellent corrosion resistance and weldability. Its substantial cross-section is ideal for structural supports, base plates, heavy brackets, and industrial equipment frames. In stock for Los Angeles pickup. Learn More

This 6" x 1/2" 304 Stainless Steel Flat Bar is a versatile, corrosion-resistant structural material sold in 144" lengths. Conforming to ASTM A276, it provides 73,200 PSI tensile strength, excellent weldability, and superior formability. Its substantial size makes it ideal for manufacturing heavy-duty base plates, structural framing, and equipment supports in food processing and architectural applications. In stock for Los Angeles pickup. Learn More

3/4" NPS Schedule 40 pipe in 304 stainless steel. This pipe conforms to ASTM A312 and provides excellent corrosion resistance and weldability for demanding applications. With a tensile strength of 73,200 PSI, it is a reliable choice for fluid and gas transport in food processing, chemical plants, and water treatment systems. Ideal for instrumentation lines and small-scale process piping. In stock Los Angeles. Learn More

5-inch Nominal Pipe Size (NPS) 304 Stainless Steel Pipe, Schedule 10 wall, in 240-inch lengths. Conforming to ASTM A312, this pipe provides excellent corrosion resistance and weldability. With a tensile strength of 73,200 PSI, it is ideal for large-scale fluid transport, industrial process lines, and structural applications requiring strength and longevity. In stock for Los Angeles pickup. Learn More

1-inch OD 304 Stainless Steel Round Tube with a 0.120-inch wall, 240-inch length. Conforms to ASTM A269, this tubing combines a 73,200 PSI tensile strength with excellent corrosion resistance and weldability. Its versatile nature makes it ideal for structural applications, architectural handrails, food processing equipment, and general fabrication projects. In stock and available for same-day pickup in Los Angeles. Learn More

This 1" x 1" x 1/8" Type 304 Stainless Steel Angle provides excellent corrosion resistance and structural rigidity. Conforming to ASTM A276, it features 73,200 PSI tensile strength and superior weldability. Its small profile is ideal for light framing, equipment brackets, corner guards, and architectural trim where both strength and a clean finish are required. In stock for same-day cutting and pickup in Los Angeles. Learn More

1" x 1" x 3/16" 304 Stainless Steel Angle in a 240-inch length. Conforming to ASTM A276, this material provides excellent corrosion resistance and weldability with a tensile strength of 73,200 PSI. Its small profile is ideal for light structural support, custom brackets, architectural trim, and equipment framing where both strength and a clean finish are required. In stock for immediate Los Angeles pickup. Learn More

1" x 1" x 1/4" 304 Stainless Steel Angle, available in 240" lengths. This austenitic grade conforms to ASTM A276, offering 73,200 PSI tensile strength, excellent weldability, and superior corrosion resistance. As a small profile, it is ideal for light framing, equipment guards, and architectural trim. In stock for immediate Los Angeles pickup. Learn More

This 2" x 2" x 1/8" Type 304 Stainless Steel Angle offers an excellent combination of strength, corrosion resistance, and weldability. Conforming to ASTM A276, it provides 73,200 PSI tensile strength for reliable performance. Its medium size is ideal for structural framing, equipment bases, shelving, and general fabrication projects requiring durability and a clean finish. In stock for same-day Los Angeles pickup. Learn More

2-1/2" x 1/8" 304 Stainless Steel Flat Bar, 144" length. Conforms to ASTM A276, offering 73,200 PSI tensile strength, excellent corrosion resistance, and superior weldability. This versatile austenitic grade is non-magnetic in its annealed state. The medium-width profile is ideal for structural bracing, equipment framework, base plates, and general fabrication. In stock for Los Angeles pickup. Learn More

4" x 1/8" 304 Stainless Steel Flat Bar, 144" length. Conforming to ASTM A276, this austenitic grade offers 73,200 PSI tensile strength and excellent corrosion resistance. Its strength and superior weldability make it a top choice for fabrication. This large width is ideal for base plates, heavy structural supports, and die components. In stock for Los Angeles pickup. Learn More

3/16" x 1-1/4" 304 Stainless Steel Flat Bar, 144" length. Conforms to ASTM A276, this versatile bar offers 73,200 PSI tensile strength, excellent corrosion resistance, and superior weldability. Its medium size is ideal for structural bracing, equipment framework, and architectural trim. A non-magnetic, austenitic grade perfect for food processing and general fabrication. In stock for immediate Los Angeles pickup. Learn More

304 Stainless Steel Flat Bar measuring 2" wide by 3/16" thick, in a 144" length. This versatile bar meets ASTM A276 standards and offers 73,200 PSI tensile strength, excellent corrosion resistance, and superior weldability. Its medium size is ideal for structural bracing, machine components, food equipment frames, and architectural trim. In stock for same-day Los Angeles pickup. Learn More

304 Stainless Steel Flat Bar measuring 3" wide by 3/16" thick, sold in 144" lengths. This versatile bar conforms to ASTM A276 standards and provides excellent corrosion resistance and weldability. Its 73,200 PSI tensile strength makes it ideal for structural bracing, equipment frames, and general fabrication. In stock for immediate Los Angeles pickup or delivery. Learn More

3/4" x 1/4" Type 304 Stainless Steel Flat Bar, 144" length. Conforms to ASTM A276 and offers a balance of strength and excellent corrosion resistance. With 73,200 PSI tensile strength and superior weldability, this versatile bar is ideal for manufacturing structural brackets, braces, and food processing equipment components. Its clean mill finish is also suitable for architectural trim. In stock for Los Angeles pickup. Learn More

2-1/2" x 1/4" 304 Stainless Steel Flat Bar, 144" length. Conforms to ASTM A276, delivering 73,200 PSI tensile strength and excellent corrosion resistance. This versatile austenitic stainless is ideal for structural supports, food processing equipment, and architectural trim. Its non-magnetic properties and superior weldability make it a top choice for fabrication projects. In stock for Los Angeles pickup. Learn More

This 4" x 1/4" 304 Stainless Steel Flat Bar, sold in 144" lengths, conforms to ASTM A276 standards. It features 73,200 PSI tensile strength, excellent weldability, and superior corrosion resistance. As a large profile bar, it provides substantial strength for heavy structural applications, base plates, and equipment framework. In stock for Los Angeles pickup. Learn More

A versatile 2 Inch by 3/8 Inch 304 Stainless Steel Flat Bar, 144 inches long. This bar meets ASTM A276 standards and offers an excellent combination of corrosion resistance, strength, and weldability with a tensile strength of 73,200 PSI. Its medium width makes it ideal for structural bracing, machine ways, framework, and food processing equipment. Available for same-day pickup in Los Angeles. Learn More

2" x 1/2" 304 Stainless Steel Flat Bar, 144" length. This versatile bar conforms to ASTM A276 and offers an excellent combination of strength, with 73,200 PSI tensile, and corrosion resistance. Its medium profile is ideal for structural bracing, machine ways, supports, and general fabrication. Excellent weldability and formability allow for complex designs. In stock for same-day Los Angeles pickup. Learn More

1/2" NPS Schedule 40 Stainless Steel Pipe, 240" length. This 304 stainless steel pipe conforms to ASTM A312 and has a tensile strength of 73,200 PSI. It combines excellent corrosion resistance and weldability, making it a standard for fluid and gas transport. The small diameter is ideal for instrumentation lines, conduit, and small-scale process piping. In stock for Los Angeles pickup. Learn More

1" NPS Schedule 40 pipe manufactured from 304 stainless steel, supplied in a 240" (20 ft) length. Conforming to ASTM A312, it provides excellent weldability and corrosion resistance with a tensile strength of 73,200 PSI. This versatile size is ideal for fluid transport, industrial plumbing, and structural applications like handrails and support posts. In stock for Los Angeles pickup. Learn More

3/4" OD x 0.065" wall 304 Stainless Steel Round Tube with a 180 grit polished finish. Conforms to ASTM A269 and offers 73,200 PSI tensile strength. This grade combines excellent corrosion resistance and weldability, making it ideal for architectural and decorative applications like handrails, guardrails, and trim. The polished surface provides a clean, aesthetic appearance. In stock for immediate Los Angeles pickup. Learn More

1" OD x 0.065" wall 304 Stainless Steel Round Tube with a 180 grit polished finish. This versatile tubing conforms to ASTM A269, delivering 73,200 PSI tensile strength, excellent weldability, and superior corrosion resistance. Its medium diameter is ideal for architectural handrails, food processing equipment, frames, and decorative applications where a clean, aesthetic finish is required. In stock for immediate Los Angeles pickup. Learn More

1-5/8" OD x 0.065" wall Type 304 Stainless Steel Round Tube, 20-foot length, with a 180 grit polished finish. This versatile austenitic stainless steel meets ASTM A269 standards and offers 73,200 PSI tensile strength, excellent corrosion resistance, and superior weldability. Its medium diameter is ideal for architectural handrails, food processing equipment frames, and marine hardware. In stock for immediate Los Angeles pickup. Learn More

This 2" OD 304 Stainless Steel Round Tube features a 0.120" wall thickness and a 180 grit polished finish. Conforming to ASTM A269, it offers 73,200 PSI tensile strength, excellent weldability, and superior corrosion resistance. Its medium diameter is ideal for architectural handrails, sanitary food processing equipment, and structural frames requiring both strength and a clean appearance. In stock for immediate Los Angeles pickup. Learn More

1-1/2" x 1/4" 304 Stainless Steel Angle in 240-inch lengths. Conforming to ASTM A276, this versatile angle provides 73,200 PSI tensile strength, excellent corrosion resistance, and superior weldability. Its medium size is ideal for structural framing, equipment bases, shelving, and architectural trim. A non-magnetic, austenitic steel perfect for fabrication projects requiring durability and a clean finish. In stock for immediate Los Angeles pickup. Learn More

3/16" x 1-1/2" 304 Stainless Steel Flat Bar in a 144" length. Conforming to ASTM A276, this versatile bar offers excellent corrosion resistance, high ductility, and superior weldability. Its 73,200 PSI tensile strength makes it ideal for structural bracing, machine ways, and equipment framework. This medium-width bar is a popular choice for fabrication projects. In stock for Los Angeles pickup. Learn More

1-1/2" OD x 0.065" wall 304 Stainless Steel Round Tube, supplied in 20-foot lengths. Conforms to ASTM A269, featuring a 73,200 PSI tensile strength, excellent weldability, and corrosion resistance. The 180 grit polished finish provides a clean, decorative appearance ideal for architectural handrails, equipment frames, and structural supports. In stock for immediate Los Angeles pickup. Learn More

1-1/2" nominal pipe size (NPS) 304 Stainless Steel Pipe, Schedule 40 x 20' length. Conforms to ASTM A312, offering excellent corrosion resistance and 73,200 PSI tensile strength. This medium-sized pipe is ideal for plumbing mains, process piping, and structural posts where durability and reliability are essential. In stock for same-day cutting and pickup in Los Angeles. Learn More

1-1/4" x 1/2" 304 Stainless Steel Flat Bar, 144" length. Conforming to ASTM A276, this austenitic stainless offers 73,200 PSI tensile strength, excellent weldability, and superior corrosion resistance. Its versatile rectangular profile is ideal for structural bracing, equipment framework, and architectural trim. This medium-width bar is a durable choice for food processing and general fabrication. In stock for Los Angeles pickup. Learn More

The 1 Sq Pressed Steel Cap is a durable, weldable finishing component for 1-inch square tubing. Made from low-carbon mild steel, it provides a clean, protective end for fence posts, railings, and metal furniture. Designed for easy integration in fabrication projects. Learn More

A compact and secure 10-digit mini garage door and gate opener with keychain. Built with industrial-grade components for reliable access control in commercial and MRO applications. Features a durable, weather-resistant casing for long-lasting performance. Learn More

The ACCESS 10 Transmitter is a durable, 10-digit remote for commercial garage doors and gates. Engineered for reliability and UL/CSA certified, it ensures secure access for MRO and facility management applications. Features a robust industrial polymer casing for long-term use. Learn More

Our industrial-grade DTM Clear Coat is a high-performance alkyd coating designed for direct application on metal surfaces. It provides exceptional corrosion resistance and a durable, transparent finish ideal for MRO and fabrication projects. Learn More

Pacific Brown DTM is a high-performance, oil-based (alkyd) industrial coating designed for direct application to metal. It provides excellent corrosion resistance and a durable finish, making it ideal for demanding MRO and fabrication projects. Learn More

Durable Galvanized Slotted Angle for versatile framing and support applications. Fabricated from commercial-grade steel with a corrosion-resistant galvanized finish meeting ASTM A653 coating standards. The 1-1/2" x 1-1/2" x 16GA profile provides reliable integrity for MRO and construction projects. Learn More

The 3 Inch Post Ball Cap is a durable, decorative finial for fence posts and railings. Manufactured from high-strength Class 25-30 gray iron, it provides a classic architectural finish and protects the post top from weather. Ideal for both new fabrication and MRO projects. Learn More

The 1/4" Cobalt Drill Bit is engineered from M35 steel with 5% cobalt for exceptional heat resistance up to 1100°F. Its 135° split-point geometry ensures precise, walk-free starts and efficient drilling in hard materials like stainless steel and cast iron. Learn More

Our 3" x 3" Heavy Duty Square Steel Base Plate is a robust mounting solution for structural applications. Made from high-strength, weldable low-carbon steel, it features pre-drilled holes for secure anchoring. Ideal for fencing, posts, and equipment support. Learn More

Galvanized Slotted Angle (1-1/2" x 1-1/2" x 16GA) is a versatile framing material made from durable, corrosion-resistant galvanized steel meeting ASTM A653 standards. It is perfect for constructing custom shelving, racks, and supports for industrial MRO and fabrication projects. The pre-punched slotted pattern allows for simple, bolt-together assembly. Learn More

Galvanized Slotted Angle (2-1/4" x 1-1/2" x 16GA) crafted from low carbon steel with an ASTM A653 compliant galvanized coating for superior corrosion resistance. Ideal for constructing custom frames, racks, and supports in industrial and commercial applications. Learn More

Our 16GA Galvanized Slotted Angle is a versatile framing component made from commercial-grade steel. The galvanized coating provides superior corrosion resistance in conformance with general ASTM standards, making it ideal for custom shelving, bracing, and MRO projects. Learn More

Our Industrial-Grade Gloss Black DTM Paint is a high-performance alkyd coating designed for direct application on metal. It provides excellent corrosion resistance and a durable, high-gloss finish suitable for demanding fabrication and MRO environments. Learn More

Our industrial-grade, oil-based white primer is an alkyd formulation designed for superior adhesion on metal surfaces. It provides an excellent foundation for topcoats, ensuring long-lasting corrosion protection for fabrication and MRO projects. Ideal for direct-to-metal (DTM) surface preparation. Learn More

The 1-1/2 Double Lock Box is an industrial-grade hardware component for fabricating secure gate and fence locking systems. Made from weldable steel, it provides a durable housing for standard lock mechanisms, making it ideal for ornamental and security applications. Learn More

Our 1-1/4 Double Lock Box is a durable gate hardware component crafted from high-strength Class 25-30 gray cast iron. Designed for 1-1/4" square tubing, it provides a secure housing for lock mechanisms in ornamental fences and security gates. Ideal for industrial fabrication and commercial applications. Learn More

The 1/8" Cobalt Drill Bit is engineered from M35 steel with 5% cobalt for superior heat resistance when drilling hard metals. Featuring a 135° split-point geometry for precision, it is ideal for stainless steel and cast iron applications compliant with ANSI/ASME B94.11M standards. Learn More

Our 2 Inch Square Plastic Cap is an industrial-grade finishing component made from durable, low-density polyethylene (LDPE). It provides a secure, press-fit closure for square tubing, protecting against moisture and debris while offering a clean, professional appearance. Learn More

Protect high-traffic areas with our Galvanized Corner Guard. Made from durable 16 gauge steel with a G90 galvanized coating for superior corrosion resistance, conforming to ASTM A653 standards. Ideal for industrial, commercial, and MRO applications requiring robust wall and corner protection. Learn More

The 1-¼” Single Lockbox with a single hole is an essential component for security gates and fences. Constructed from high-quality, weldable steel, it provides a durable housing for gate locks. Designed for easy installation and long-term performance in commercial and residential applications. Learn More

The 14 x 2” Hex Washer Self-Drill Screw is a high-performance fastener engineered to SAE J78 standards. It features a hardened steel point for drilling into metal without a pilot hole and a bonded neoprene washer for a weather-tight seal. The zinc plating, compliant with ASTM B633, provides excellent corrosion resistance for exterior applications. Learn More

The 1” x 3” Flower Welding Tab is a decorative and functional component for custom metal fabrication. Precision cut from 1/8” thick weldable mild steel, it provides a reliable mounting point for ornamental gates, fences, and furniture. Ideal for projects requiring both strength and aesthetic appeal. Learn More

Hanover Green DTM is an industrial-grade, direct-to-metal coating engineered for superior corrosion protection. Its durable alkyd formulation provides a long-lasting, semi-gloss finish on steel surfaces, ideal for professional fabrication and MRO. Learn More

Metalize Industrial Primer is a high-performance alkyd coating engineered for superior corrosion resistance on metal surfaces. Formulated to meet rigorous MIL-SPEC performance criteria, it provides an excellent foundation for DTM (Direct-to-Metal) applications. Ideal for demanding industrial, MRO, and fabrication projects. Learn More

The 4 Sq Pressed Steel Cap provides a durable, clean finish for square tubing and fence posts. Fabricated from high-quality pressed steel for excellent weldability and longevity. Ideal for ornamental ironwork and security fencing projects. Learn More

Our 6-inch rubber roller is an industrial-grade component designed for durability and smooth operation. Constructed from high-traction rubber on a robust core, it is ideal for material handling systems and heavy-duty MRO applications. Learn More

3/16" thick A36 Hot Rolled Steel Plate, measuring 48" x 120". This structural plate conforms to ASTM A36 and provides a minimum yield strength of 36,000 PSI with excellent formability and weldability. Its medium thickness is ideal for gussets, structural base plates, and general fabrication projects where strength and economy are key. In stock for immediate Los Angeles pickup. Learn More

1/4" x 48" x 120" A36 Hot Rolled Steel Plate, compliant with ASTM A36 standards. This structural plate offers a guaranteed minimum yield strength of 36,000 PSI, excellent weldability, and good formability. Its medium thickness is ideal for structural panels, machinery guards, gussets, and general fabrication projects where strength and economy are key. In stock for same-day Los Angeles pickup. Learn More

3/8" x 48" x 120" Hot Rolled Steel Plate, conforming to ASTM A36. This structural plate provides a minimum yield strength of 36,000 PSI and excellent weldability for reliable fabrication. The thick 3/8" profile is ideal for heavy-duty applications like machinery base plates, gussets, and structural supports where strength and durability are critical. In stock for immediate Los Angeles pickup. Learn More

1/2" thick A36 Hot Rolled Steel Plate, 48" x 120". A structural carbon steel conforming to ASTM A36, it provides a guaranteed minimum yield strength of 36,000 PSI and excellent weldability. This heavy-gauge plate is ideal for manufacturing column base plates, heavy equipment mounting pads, gussets, and other demanding structural applications where strength and durability are critical. In stock for immediate Los Angeles pickup. Learn More

5/8" x 48" x 120" A36 Hot Rolled Steel Plate, compliant with ASTM A36 standards. This material features a minimum yield strength of 36,000 PSI and excellent weldability, making it a reliable choice for structural applications. The large 5/8" thickness is ideal for heavy-duty uses like machinery base plates, gussets, and structural supports where durability is critical. In stock Los Angeles. Learn More

3/4" x 48" x 120" A36 Hot Rolled Steel Plate. Conforms to ASTM A36 with a minimum yield strength of 36,000 PSI. This large-format plate provides excellent weldability and good machinability for structural applications. Its substantial thickness is ideal for heavy-duty base plates, gussets, equipment mounting, and general fabrication projects requiring robust support. In stock for same-day Los Angeles pickup. Learn More

1" thick A36 Hot Rolled Steel Plate, 48" x 120". Conforms to ASTM A36 with 36,000 PSI minimum yield strength. This structural plate offers excellent weldability and good machinability. Its large thickness makes it ideal for heavy-duty applications like column base plates, heavy equipment mounting, wear plates, and general fabrication projects requiring robust support. In stock and ready for custom cutting or pickup in Los Angeles. Learn More

1/4 inch diameter Cold Rolled All Thread Rod with a zinc plated finish for corrosion resistance. Continuous threading along its 120-inch length provides versatile fastening. Made from low-carbon steel conforming to ASTM A307 strength requirements, it offers 63,800 PSI tensile strength. Ideal for light-duty bracing, suspending conduit, and creating custom-length fasteners. In stock for same-day Los Angeles pickup. Learn More

This 3/8 inch diameter Cold Rolled All Thread Rod is supplied in a 10 foot length with a zinc-plated finish for moderate corrosion resistance. Made from low-carbon steel, it meets the strength requirements of ASTM A307 Grade A, providing a typical tensile strength of 63,800 PSI. Its continuous threading makes it ideal for versatile fastening, anchoring, bracing, and support applications. In stock for Los Angeles pickup. Learn More

1/2" diameter Cold Rolled Steel All Thread Rod with an oil finish, supplied in 120" lengths. Made from low-carbon steel, it meets the strength requirements of ASTM A307 Grade A and offers 63,800 PSI tensile strength. The continuous threading provides versatile fastening for construction, manufacturing, and general repair. In stock for Los Angeles pickup. Learn More

1/2" diameter Cold Rolled All Thread Rod, supplied in 120-inch lengths with a zinc plated finish for corrosion resistance. Conforming to the strength requirements of ASTM A307, this rod offers a tensile strength of 63,800 PSI. Its continuous threading provides maximum versatility for custom-length fasteners, anchoring systems, and structural bracing. In stock for same-day Los Angeles pickup. Learn More

5/8" diameter Cold Rolled All Thread Rod in a 10 ft length, featuring a zinc-plated finish for corrosion resistance. Made from low-carbon steel that meets the strength requirements of ASTM A307 Grade A. Offers good weldability and strength for general-purpose fastening, bracing, and support applications in construction and manufacturing. In stock for immediate Los Angeles pickup. Learn More

3/4" diameter Cold Rolled All Thread Rod in 10-foot lengths with a standard oil finish. Made from low-carbon steel, this rod offers good strength (approx. 63,800 PSI tensile) and conforms to ASTM A307 Grade A strength requirements. The continuous threading provides versatile performance for anchoring, fastening, bracing, and suspending systems in construction and manufacturing. In stock for same-day Los Angeles pickup. Learn More

3/4 inch diameter Cold Rolled All Thread Rod in a 120-inch length with a zinc-plated finish for corrosion resistance. Manufactured from low-carbon steel, its strength conforms to ASTM A307 Grade A with a typical tensile strength of 63,800 PSI. This versatile, continuously threaded rod is ideal for general-purpose fastening, bracing, and anchoring applications in construction and industrial settings. In stock Los Angeles. Learn More

7/8 inch diameter Cold Rolled All Thread Rod, 120" length, with an oil finish for rust prevention. Conforming to the strength requirements of ASTM A307 Grade A, this rod is made from low-carbon steel offering 63,800 PSI tensile strength. Its continuous threading provides versatile fastening for construction, manufacturing, and general repair. In stock for immediate Los Angeles pickup. Learn More

7/8 inch diameter Cold Rolled All Thread Rod in 10-foot lengths. This zinc-plated, low-carbon steel rod meets the strength requirements of ASTM A307 Grade A, with a typical tensile strength of 63,800 PSI. The zinc plating provides moderate corrosion resistance for versatile use. It is ideal for general-purpose fastening, anchoring, and support systems in construction and manufacturing. In stock for immediate Los Angeles pickup. Learn More

1" diameter Cold Rolled All Thread Rod in 120" (10 ft) lengths. Made from 1018 steel with an oil finish for rust prevention, this rod meets ASTM A307 Grade A strength requirements with a 60,000 PSI tensile strength. The continuous threading provides versatile fastening for construction, manufacturing, and general repair. Easily cut to custom lengths. In stock for Los Angeles pickup. Learn More

1-inch diameter Cold Rolled All Thread Rod in a 120-inch length with a zinc plated finish. This rod meets ASTM A307 Grade A strength requirements, with a base material tensile strength of 63,800 PSI. The zinc plating provides good corrosion resistance for general-purpose fastening, anchoring systems, and suspending HVAC fixtures. In stock for immediate Los Angeles pickup. Learn More

1/8" x 1/4" 1018 Cold Rolled Steel Flat Bar, 144" length. Conforms to ASTM A108 with 63,800 PSI tensile strength, good weldability, and a 70% machinability rating. The cold drawn process provides a smooth, scale-free finish and tight dimensional tolerances. Its small profile is ideal for brackets, shims, straps, and small frame stock. In stock for Los Angeles pickup. Learn More

1/8" x 1/2" 1018 Cold Rolled Steel Flat Bar, 144" length. Conforms to ASTM A108 with 63,800 PSI tensile strength and a smooth, scale-free finish. This grade offers excellent machinability and weldability, making its small profile ideal for fabricating custom brackets, straps, shims, and support braces. In stock for immediate Los Angeles pickup. Learn More

1/8" x 3/4" 1018 Cold Rolled Flat Bar, 144" length. Conforms to ASTM A108 with a tensile strength of 63,800 PSI. This grade offers excellent machinability and a smooth, scale-free surface due to the cold drawing process. Ideal for manufacturing small brackets, mounting straps, shims, and precision frame components. In stock for Los Angeles pickup. Learn More

1" x 1/8" 1018 Cold Rolled Steel Flat Bar, 144" length. Conforms to ASTM A108, offering 63,800 PSI tensile strength and excellent machinability (70%). The cold drawn process provides a smooth, scale-free finish and tight dimensional tolerances. This medium-width bar is ideal for structural bracing, machine ways, and wear strips where precision is key. In stock for Los Angeles pickup. Learn More

1-1/4" x 1/8" 1018 Cold Rolled Steel Flat Bar, sold in 144" lengths. This bar meets ASTM A108 standards, offering 63,800 PSI tensile strength, tight dimensional tolerances, and a smooth, scale-free finish. Its excellent machinability and weldability make it a versatile choice for fabricating brackets, machine ways, and structural bracing. In stock for Los Angeles pickup. Learn More

1018 Cold Rolled Steel Flat Bar, 1-1/2" wide by 1/8" thick in 144" lengths. Conforming to ASTM A108, this bar offers a tensile strength of 63,800 PSI, excellent machinability, and a smooth, scale-free surface. Its tight dimensional tolerances make it ideal for fabricating precision parts like mounting brackets, machine ways, and base plates. In stock for same-day Los Angeles pickup. Learn More

2" x 1/8" 1018 Cold Rolled Steel Flat Bar, 144" length. Conforming to ASTM A108, this cold finished bar offers a smooth, scale-free surface and tight dimensional tolerances. With a tensile strength of 63,800 PSI and good machinability, it's ideal for manufacturing base plates, machine ways, and structural bracing. In stock for immediate cutting and Los Angeles pickup. Learn More

A 4" wide by 1/8" thick 1018 Cold Rolled Steel Flat Bar, supplied in a 144" length. This bar meets ASTM A108 standards and features 63,800 PSI tensile strength, tight dimensional tolerances, and good weldability. The cold drawn finish provides a smooth, scale-free surface ideal for machining. Its large width makes it suitable for base plates, structural supports, and die components. In stock Los Angeles. Learn More

5" x 1/8" 1018 Cold Rolled Flat Bar, 144" length. Conforming to ASTM A108, this low-carbon steel offers a smooth, scale-free finish and tight dimensional tolerances. It has a tensile strength of 63,800 PSI and excellent machinability. The wide 5-inch profile is ideal for base plates, heavy structural bracing, and die components. In stock for Los Angeles pickup. Learn More

3/16" x 1/2" 1018 Cold Rolled Steel Flat Bar, 144" length. Conforms to ASTM A108 with 63,800 PSI tensile strength and excellent machinability. The smooth, scale-free surface and tight dimensional tolerances make it ideal for fabrication of small parts like brackets, straps, and shims that require a clean finish and precision. In stock for Los Angeles pickup. Learn More

3/16" x 3/4" Cold Rolled 1018 Steel Flat Bar, 144" length. Conforming to ASTM A108, this bar has a clean, scale-free surface, tight dimensional tolerances, and 63,800 PSI tensile strength. Its excellent machinability and good weldability make it a versatile choice for fabricating custom brackets, straps, and base plates. In stock Los Angeles. Learn More

1" x 3/16" 1018 Cold Rolled Steel Flat Bar, 144" length. Conforms to ASTM A108, delivering 63,800 PSI tensile strength and a smooth, scale-free finish. Known for excellent machinability and weldability, this medium-width bar is a versatile choice for fabricating brackets, machine ways, and structural bracing. In stock for immediate Los Angeles pickup. Learn More

This 1-1/2" x 3/16" Cold Rolled Flat Bar is made from 1018 steel, conforming to ASTM A108 standards. It offers 63,800 PSI tensile strength, a smooth, scale-free surface, and tight dimensional tolerances. With good machinability and weldability, it's ideal for manufacturing brackets, base plates, and machine components. Available for same-day pickup in Los Angeles. Learn More

3/16" x 3" 1018 Cold Rolled Steel Flat Bar, 144" length. Conforms to ASTM A108 with 63,800 PSI tensile strength, superior dimensional tolerance, and a clean, smooth surface. It offers a good balance of strength, weldability, and excellent machinability. This medium-width bar is ideal for structural bracing, machine ways, and base plates. In stock for Los Angeles pickup. Learn More

A 3/16" x 4" Cold Rolled 1018 Steel Flat Bar, 144 inches long. Produced to ASTM A108 standards, this bar provides a tensile strength of 63,800 PSI, tight dimensional tolerances, and excellent machinability. The smooth, scale-free surface is ideal for applications requiring a clean finish. Suitable for base plates, structural components, and machine parts. In stock Los Angeles. Learn More

This 1018 Cold Rolled Flat Bar measures 6 inches wide by 3/16 inch thick, in a 144-inch length. Conforming to ASTM A108, it provides a smooth, scale-free surface, tight dimensional tolerances, and excellent machinability. Its 63,800 PSI tensile strength makes it ideal for manufacturing base plates, heavy structural bracing, and die components. In stock for same-day Los Angeles pickup. Learn More

1/4" x 1/2" Cold Rolled 1018 Steel Flat Bar, 144" length. Conforms to ASTM A108 standards, offering 63,800 PSI tensile strength, tight dimensional tolerances, and excellent machinability. The smooth, scale-free cold drawn finish is ideal for precision parts. This small size is perfect for manufacturing brackets, shims, and straps. In stock for same-day Los Angeles pickup. Learn More

1/4" x 5/8" 1018 Cold Rolled Steel Flat Bar, 144" length. Conforms to ASTM A108 with a tensile strength of 63,800 PSI and excellent machinability. The cold drawing process provides a smooth, scale-free surface and tight dimensional tolerances. This small-width bar is ideal for brackets, straps, shims, and precision-machined components. In stock for immediate Los Angeles pickup. Learn More

3/4" x 1/4" Cold Rolled Flat Bar in 1018 grade steel, sold in 144" lengths. Conforms to ASTM A108 with 63,800 PSI tensile strength and excellent machinability. The cold drawing process provides tight dimensional tolerances and a smooth, scale-free surface. This small-profile bar is ideal for manufacturing precision brackets, straps, and small machine components. In stock for same-day Los Angeles pickup. Learn More

1018 Cold Rolled Flat Bar measuring 1" wide by 1/4" thick in a 144" length. This versatile bar conforms to ASTM A108 and features a tensile strength of 63,800 PSI. Its cold-drawn finish provides tight dimensional tolerances and excellent machinability, making it ideal for structural bracing, brackets, and machine components. In stock for same-day Los Angeles pickup. Learn More

1018 Cold Rolled Steel Flat Bar, 1-1/4" wide by 1/4" thick in 144" lengths. This bar conforms to ASTM A108 and offers a tensile strength of 63,800 PSI. The cold drawing process provides tight dimensional tolerances and a smooth, scale-free surface. It's an excellent choice for machining, forming, and welding, ideal for brackets, machine ways, and structural bracing. In stock for Los Angeles pickup. Learn More

1018 Cold Rolled Flat Bar, 1-1/2" wide by 1/4" thick, in a 144" length. Conforming to ASTM A108, this bar offers a tensile strength of 63,800 PSI, excellent machinability, and a smooth, scale-free surface. Its tight dimensional tolerances make it ideal for manufacturing brackets, base plates, and structural components requiring precision. In stock for immediate Los Angeles pickup. Learn More

1018 Cold Rolled Steel Flat Bar, measuring 1/4" thick by 1-3/4" wide. This bar conforms to ASTM A108 and offers superior dimensional accuracy and a smooth, scale-free surface due to the cold drawing process. With 63,800 PSI tensile strength, its medium size is ideal for manufacturing base plates, mounting brackets, and structural components requiring precision. In stock for immediate Los Angeles pickup. Learn More

A 2" x 1/4" 1018 Cold Rolled Steel Flat Bar in a 144" length. Conforming to ASTM A108, this versatile bar features a smooth, scale-free surface, tight dimensional tolerances, and excellent machinability. Its 63,800 PSI tensile strength makes it ideal for structural bracing, machine ways, and general fabrication where precision and a clean finish are required. In stock Los Angeles. Learn More