Search results for: 'special overs'

The C45 Cap Rail is an industrial-grade ornamental fitting forged from Class 25-30 gray cast iron. It is designed with a 1-¾” width to securely fit over a standard 1-½” rail, providing a durable and decorative finish for handrail and fencing systems. Learn More

The 4 Inch Post Ball Cap is a decorative finial designed for fence posts and railings. Crafted from durable Class 25-30 gray iron, it provides a classic architectural finish for ornamental and security fencing projects. This cap is designed to fit standard 4-inch square or round posts. Learn More

Versatile 16-gauge steel slotted angle for framing and support, featuring a hot-dip galvanized finish for superior corrosion resistance. This product, measuring 2-1/4" x 1-1/2" x 120", provides a durable, bolt-together solution for industrial shelving, racks, and MRO projects. Learn More

This 6" Cast Iron V-Groove Wheel is engineered for smooth operation on angle iron tracks. Made from industrial-grade Class 25-30 gray iron, it supports a heavy-duty load capacity of 500 lbs. Ideal for sliding gates, industrial doors, and material handling carts. Learn More

This 8 x ½ Pan Head Phillips Truss Screw is a versatile fastener made from low carbon steel. It features a zinc plating with CR3+ passivate compliant with ASTM B633 for reliable corrosion resistance. The wide truss head provides an excellent bearing surface for thin materials. Learn More

The 14 x ¾” Hex Washer Self-Drill Screw is a high-performance fastener for metal-to-metal applications. Compliant with SAE J78 standards, it features a zinc plating (ASTM B633) for corrosion resistance and an integrated neoprene washer for a weatherproof seal. Learn More

The 14 x 2” Hex Washer Self-Drill Screw is a high-performance fastener engineered to SAE J78 standards. It features a hardened steel point for drilling into metal without a pilot hole and a bonded neoprene washer for a weather-tight seal. The zinc plating, compliant with ASTM B633, provides excellent corrosion resistance for exterior applications. Learn More

This 1/4" x 2" Hex Lag Screw features a protective zinc plating per ASTM B633. Manufactured from low carbon steel, it meets ASTM A307 specifications, providing reliable holding power and a minimum tensile strength of 60,000 psi for wood construction applications. Learn More

Enhance worksite safety with high-visibility orange reflectorized vests. Constructed from durable, lightweight polyester mesh with reflective strips for maximum visibility, this free-size vest is essential PPE for construction and industrial environments. Learn More

These 7" J-Bolt Adjustable Barrel Hinges are engineered from high-strength steel for maximum durability in heavy-duty applications. Designed for weld-on installation, they provide a smooth, reliable pivot for industrial gates and doors. The adjustable J-bolt allows for precise alignment and tensioning. Learn More

This 2-1/2 Inch Post Ball Cap is a high-quality ornamental component crafted from durable Class 25-30 gray iron. It provides a classic, protective finish for fence posts, gates, and handrails. Engineered for long-lasting performance in architectural and fabrication projects. Learn More

Our Spring Loaded Wheel with 3 Casters is an industrial-grade solution for material handling equipment. Engineered to support dynamic load ratings from 200 to 2000 lbs, it provides superior shock absorption and smooth mobility for carts, racks, and dollies. The durable steel construction ensures reliability in demanding warehouse and fabrication environments. Learn More

Forney 1/8" (3.2mm) Aluminum Welding Electrode designed for reliable fabrication and repair. This AWS-compliant consumable ensures consistent, high-quality welds on various aluminum alloys. Ideal for professional MRO and fabrication projects. Learn More

This 14 x 1-1/2" Hex Washer Self-Drill Screw is an industrial-grade fastener designed for efficient metal-to-metal connections. It features a zinc-plated finish per ASTM B633 for corrosion resistance and complies with SAE J78 standards. The integrated neoprene washer provides a weather-tight seal. Learn More

The 4 Sq Pressed Steel Cap provides a durable, clean finish for square tubing and fence posts. Fabricated from high-quality pressed steel for excellent weldability and longevity. Ideal for ornamental ironwork and security fencing projects. Learn More

This industrial-grade construction adhesive meets ASTM C557 standards, ensuring a high-strength, reliable bond for professional use. Its versatile formulation is engineered for demanding fabrication, construction, and MRO applications on various substrates. Learn More

This 5/16" x 3" one-way screw is engineered for permanent, tamper-resistant applications. Manufactured from industrial-grade steel with a protective black finish, its unique drive system prevents removal once installed. Conforms to common ANSI/ASME dimensional standards. Learn More

1/4 inch diameter Cold Rolled All Thread Rod with a zinc plated finish for corrosion resistance. Continuous threading along its 120-inch length provides versatile fastening. Made from low-carbon steel conforming to ASTM A307 strength requirements, it offers 63,800 PSI tensile strength. Ideal for light-duty bracing, suspending conduit, and creating custom-length fasteners. In stock for same-day Los Angeles pickup. Learn More

This 3/8 inch diameter Cold Rolled All Thread Rod is supplied in a 10 foot length with a zinc-plated finish for moderate corrosion resistance. Made from low-carbon steel, it meets the strength requirements of ASTM A307 Grade A, providing a typical tensile strength of 63,800 PSI. Its continuous threading makes it ideal for versatile fastening, anchoring, bracing, and support applications. In stock for Los Angeles pickup. Learn More

1/2" diameter Cold Rolled Steel All Thread Rod with an oil finish, supplied in 120" lengths. Made from low-carbon steel, it meets the strength requirements of ASTM A307 Grade A and offers 63,800 PSI tensile strength. The continuous threading provides versatile fastening for construction, manufacturing, and general repair. In stock for Los Angeles pickup. Learn More

1/2" diameter Cold Rolled All Thread Rod, supplied in 120-inch lengths with a zinc plated finish for corrosion resistance. Conforming to the strength requirements of ASTM A307, this rod offers a tensile strength of 63,800 PSI. Its continuous threading provides maximum versatility for custom-length fasteners, anchoring systems, and structural bracing. In stock for same-day Los Angeles pickup. Learn More

5/8" diameter Cold Rolled All Thread Rod in a 10 ft length, featuring a zinc-plated finish for corrosion resistance. Made from low-carbon steel that meets the strength requirements of ASTM A307 Grade A. Offers good weldability and strength for general-purpose fastening, bracing, and support applications in construction and manufacturing. In stock for immediate Los Angeles pickup. Learn More

3/4" diameter Cold Rolled All Thread Rod in 10-foot lengths with a standard oil finish. Made from low-carbon steel, this rod offers good strength (approx. 63,800 PSI tensile) and conforms to ASTM A307 Grade A strength requirements. The continuous threading provides versatile performance for anchoring, fastening, bracing, and suspending systems in construction and manufacturing. In stock for same-day Los Angeles pickup. Learn More

3/4 inch diameter Cold Rolled All Thread Rod in a 120-inch length with a zinc-plated finish for corrosion resistance. Manufactured from low-carbon steel, its strength conforms to ASTM A307 Grade A with a typical tensile strength of 63,800 PSI. This versatile, continuously threaded rod is ideal for general-purpose fastening, bracing, and anchoring applications in construction and industrial settings. In stock Los Angeles. Learn More

7/8 inch diameter Cold Rolled All Thread Rod, 120" length, with an oil finish for rust prevention. Conforming to the strength requirements of ASTM A307 Grade A, this rod is made from low-carbon steel offering 63,800 PSI tensile strength. Its continuous threading provides versatile fastening for construction, manufacturing, and general repair. In stock for immediate Los Angeles pickup. Learn More

7/8 inch diameter Cold Rolled All Thread Rod in 10-foot lengths. This zinc-plated, low-carbon steel rod meets the strength requirements of ASTM A307 Grade A, with a typical tensile strength of 63,800 PSI. The zinc plating provides moderate corrosion resistance for versatile use. It is ideal for general-purpose fastening, anchoring, and support systems in construction and manufacturing. In stock for immediate Los Angeles pickup. Learn More

1" diameter Cold Rolled All Thread Rod in 120" (10 ft) lengths. Made from 1018 steel with an oil finish for rust prevention, this rod meets ASTM A307 Grade A strength requirements with a 60,000 PSI tensile strength. The continuous threading provides versatile fastening for construction, manufacturing, and general repair. Easily cut to custom lengths. In stock for Los Angeles pickup. Learn More

1-inch diameter Cold Rolled All Thread Rod in a 120-inch length with a zinc plated finish. This rod meets ASTM A307 Grade A strength requirements, with a base material tensile strength of 63,800 PSI. The zinc plating provides good corrosion resistance for general-purpose fastening, anchoring systems, and suspending HVAC fixtures. In stock for immediate Los Angeles pickup. Learn More

1/8" x 1/4" 1018 Cold Rolled Steel Flat Bar, 144" length. Conforms to ASTM A108 with 63,800 PSI tensile strength, good weldability, and a 70% machinability rating. The cold drawn process provides a smooth, scale-free finish and tight dimensional tolerances. Its small profile is ideal for brackets, shims, straps, and small frame stock. In stock for Los Angeles pickup. Learn More

1/8" x 1/2" 1018 Cold Rolled Steel Flat Bar, 144" length. Conforms to ASTM A108 with 63,800 PSI tensile strength and a smooth, scale-free finish. This grade offers excellent machinability and weldability, making its small profile ideal for fabricating custom brackets, straps, shims, and support braces. In stock for immediate Los Angeles pickup. Learn More

1/8" x 3/4" 1018 Cold Rolled Flat Bar, 144" length. Conforms to ASTM A108 with a tensile strength of 63,800 PSI. This grade offers excellent machinability and a smooth, scale-free surface due to the cold drawing process. Ideal for manufacturing small brackets, mounting straps, shims, and precision frame components. In stock for Los Angeles pickup. Learn More

1" x 1/8" 1018 Cold Rolled Steel Flat Bar, 144" length. Conforms to ASTM A108, offering 63,800 PSI tensile strength and excellent machinability (70%). The cold drawn process provides a smooth, scale-free finish and tight dimensional tolerances. This medium-width bar is ideal for structural bracing, machine ways, and wear strips where precision is key. In stock for Los Angeles pickup. Learn More

1-1/4" x 1/8" 1018 Cold Rolled Steel Flat Bar, sold in 144" lengths. This bar meets ASTM A108 standards, offering 63,800 PSI tensile strength, tight dimensional tolerances, and a smooth, scale-free finish. Its excellent machinability and weldability make it a versatile choice for fabricating brackets, machine ways, and structural bracing. In stock for Los Angeles pickup. Learn More

1018 Cold Rolled Steel Flat Bar, 1-1/2" wide by 1/8" thick in 144" lengths. Conforming to ASTM A108, this bar offers a tensile strength of 63,800 PSI, excellent machinability, and a smooth, scale-free surface. Its tight dimensional tolerances make it ideal for fabricating precision parts like mounting brackets, machine ways, and base plates. In stock for same-day Los Angeles pickup. Learn More

2" x 1/8" 1018 Cold Rolled Steel Flat Bar, 144" length. Conforming to ASTM A108, this cold finished bar offers a smooth, scale-free surface and tight dimensional tolerances. With a tensile strength of 63,800 PSI and good machinability, it's ideal for manufacturing base plates, machine ways, and structural bracing. In stock for immediate cutting and Los Angeles pickup. Learn More

A 4" wide by 1/8" thick 1018 Cold Rolled Steel Flat Bar, supplied in a 144" length. This bar meets ASTM A108 standards and features 63,800 PSI tensile strength, tight dimensional tolerances, and good weldability. The cold drawn finish provides a smooth, scale-free surface ideal for machining. Its large width makes it suitable for base plates, structural supports, and die components. In stock Los Angeles. Learn More

5" x 1/8" 1018 Cold Rolled Flat Bar, 144" length. Conforming to ASTM A108, this low-carbon steel offers a smooth, scale-free finish and tight dimensional tolerances. It has a tensile strength of 63,800 PSI and excellent machinability. The wide 5-inch profile is ideal for base plates, heavy structural bracing, and die components. In stock for Los Angeles pickup. Learn More

3/16" x 1/2" 1018 Cold Rolled Steel Flat Bar, 144" length. Conforms to ASTM A108 with 63,800 PSI tensile strength and excellent machinability. The smooth, scale-free surface and tight dimensional tolerances make it ideal for fabrication of small parts like brackets, straps, and shims that require a clean finish and precision. In stock for Los Angeles pickup. Learn More

3/16" x 3/4" Cold Rolled 1018 Steel Flat Bar, 144" length. Conforming to ASTM A108, this bar has a clean, scale-free surface, tight dimensional tolerances, and 63,800 PSI tensile strength. Its excellent machinability and good weldability make it a versatile choice for fabricating custom brackets, straps, and base plates. In stock Los Angeles. Learn More

1" x 3/16" 1018 Cold Rolled Steel Flat Bar, 144" length. Conforms to ASTM A108, delivering 63,800 PSI tensile strength and a smooth, scale-free finish. Known for excellent machinability and weldability, this medium-width bar is a versatile choice for fabricating brackets, machine ways, and structural bracing. In stock for immediate Los Angeles pickup. Learn More

This 1-1/2" x 3/16" Cold Rolled Flat Bar is made from 1018 steel, conforming to ASTM A108 standards. It offers 63,800 PSI tensile strength, a smooth, scale-free surface, and tight dimensional tolerances. With good machinability and weldability, it's ideal for manufacturing brackets, base plates, and machine components. Available for same-day pickup in Los Angeles. Learn More

3/16" x 3" 1018 Cold Rolled Steel Flat Bar, 144" length. Conforms to ASTM A108 with 63,800 PSI tensile strength, superior dimensional tolerance, and a clean, smooth surface. It offers a good balance of strength, weldability, and excellent machinability. This medium-width bar is ideal for structural bracing, machine ways, and base plates. In stock for Los Angeles pickup. Learn More

A 3/16" x 4" Cold Rolled 1018 Steel Flat Bar, 144 inches long. Produced to ASTM A108 standards, this bar provides a tensile strength of 63,800 PSI, tight dimensional tolerances, and excellent machinability. The smooth, scale-free surface is ideal for applications requiring a clean finish. Suitable for base plates, structural components, and machine parts. In stock Los Angeles. Learn More

This 1018 Cold Rolled Flat Bar measures 6 inches wide by 3/16 inch thick, in a 144-inch length. Conforming to ASTM A108, it provides a smooth, scale-free surface, tight dimensional tolerances, and excellent machinability. Its 63,800 PSI tensile strength makes it ideal for manufacturing base plates, heavy structural bracing, and die components. In stock for same-day Los Angeles pickup. Learn More

1/4" x 1/2" Cold Rolled 1018 Steel Flat Bar, 144" length. Conforms to ASTM A108 standards, offering 63,800 PSI tensile strength, tight dimensional tolerances, and excellent machinability. The smooth, scale-free cold drawn finish is ideal for precision parts. This small size is perfect for manufacturing brackets, shims, and straps. In stock for same-day Los Angeles pickup. Learn More

1/4" x 5/8" 1018 Cold Rolled Steel Flat Bar, 144" length. Conforms to ASTM A108 with a tensile strength of 63,800 PSI and excellent machinability. The cold drawing process provides a smooth, scale-free surface and tight dimensional tolerances. This small-width bar is ideal for brackets, straps, shims, and precision-machined components. In stock for immediate Los Angeles pickup. Learn More

3/4" x 1/4" Cold Rolled Flat Bar in 1018 grade steel, sold in 144" lengths. Conforms to ASTM A108 with 63,800 PSI tensile strength and excellent machinability. The cold drawing process provides tight dimensional tolerances and a smooth, scale-free surface. This small-profile bar is ideal for manufacturing precision brackets, straps, and small machine components. In stock for same-day Los Angeles pickup. Learn More

1018 Cold Rolled Flat Bar measuring 1" wide by 1/4" thick in a 144" length. This versatile bar conforms to ASTM A108 and features a tensile strength of 63,800 PSI. Its cold-drawn finish provides tight dimensional tolerances and excellent machinability, making it ideal for structural bracing, brackets, and machine components. In stock for same-day Los Angeles pickup. Learn More

1018 Cold Rolled Steel Flat Bar, 1-1/4" wide by 1/4" thick in 144" lengths. This bar conforms to ASTM A108 and offers a tensile strength of 63,800 PSI. The cold drawing process provides tight dimensional tolerances and a smooth, scale-free surface. It's an excellent choice for machining, forming, and welding, ideal for brackets, machine ways, and structural bracing. In stock for Los Angeles pickup. Learn More

1018 Cold Rolled Flat Bar, 1-1/2" wide by 1/4" thick, in a 144" length. Conforming to ASTM A108, this bar offers a tensile strength of 63,800 PSI, excellent machinability, and a smooth, scale-free surface. Its tight dimensional tolerances make it ideal for manufacturing brackets, base plates, and structural components requiring precision. In stock for immediate Los Angeles pickup. Learn More

1018 Cold Rolled Steel Flat Bar, measuring 1/4" thick by 1-3/4" wide. This bar conforms to ASTM A108 and offers superior dimensional accuracy and a smooth, scale-free surface due to the cold drawing process. With 63,800 PSI tensile strength, its medium size is ideal for manufacturing base plates, mounting brackets, and structural components requiring precision. In stock for immediate Los Angeles pickup. Learn More

A 2" x 1/4" 1018 Cold Rolled Steel Flat Bar in a 144" length. Conforming to ASTM A108, this versatile bar features a smooth, scale-free surface, tight dimensional tolerances, and excellent machinability. Its 63,800 PSI tensile strength makes it ideal for structural bracing, machine ways, and general fabrication where precision and a clean finish are required. In stock Los Angeles. Learn More

2-1/2" x 1/4" 1018 Cold Rolled Flat Bar, 144" length. Conforms to ASTM A108 with 63,800 PSI tensile strength, superior dimensional tolerances, and a smooth, scale-free finish. Its excellent machinability and weldability make it a versatile choice. This medium-width bar is ideal for structural bracing, base plates, and precision machine components. In stock for immediate Los Angeles pickup. Learn More

3" x 1/4" Cold Rolled Flat Bar in 1018 steel, 144" length. Conforms to ASTM A108 with 63,800 PSI tensile strength and excellent machinability. Its smooth, scale-free surface and tight tolerances make it ideal for fabrication. This medium-width bar is perfect for structural bracing, machine ways, and wear strips. In stock for same-day Los Angeles pickup. Learn More

4" x 1/4" Cold Rolled Flat Bar, 144" length, made from 1018 low-carbon steel. Conforms to ASTM A108 standards, offering 63,800 PSI tensile strength, tight dimensional tolerances, and a smooth, scale-free finish. Its excellent machinability and weldability make it a reliable choice. The large width is ideal for base plates, heavy structural components, and machine frames. In stock for same-day Los Angeles pickup. Learn More

6" x 1/4" 1018 Cold Rolled Steel Flat Bar, 144" length. Conforms to ASTM A108 with 63,800 PSI tensile strength and a smooth, scale-free finish. This large flat bar offers tight dimensional tolerances and excellent machinability, making it ideal for base plates, heavy structural components, and die components where precision is critical. In stock for Los Angeles pickup. Learn More

3/4" x 5/16" 1018 Cold Rolled Steel Flat Bar, 144" length. Conforms to ASTM A108, providing 63,800 PSI tensile strength, a smooth surface finish, and tight dimensional tolerances. This grade offers good machinability and weldability. Its small profile is ideal for manufacturing precision brackets, straps, shims, and small frame components. In stock for Los Angeles pickup. Learn More

3/4" x 3/8" 1018 Cold Rolled Flat Bar, 144" length. Conforms to ASTM A108 with 63,800 PSI tensile strength. The cold drawing process provides a smooth, scale-free finish and tight dimensional tolerances, making it excellent for machining and welding. This small size is ideal for making brackets, straps, shims, and small frame stock. In stock for Los Angeles pickup. Learn More

1" x 3/8" 1018 Cold Rolled Steel Flat Bar, 144" length. Conforms to ASTM A108 with 63,800 PSI tensile strength and excellent machinability. The cold drawing process provides a smooth, scale-free surface and tight dimensional tolerances. Ideal for base plates, mounting brackets, and machine components requiring precision without extensive finishing. In stock for Los Angeles pickup. Learn More

1-1/4" x 3/8" 1018 Cold Rolled Flat Bar, sold in 144" lengths, conforms to ASTM A108. It features a tensile strength of 63,800 PSI, excellent machinability, and good weldability. The cold-drawn process provides a smooth, scale-free surface and tight dimensional tolerances. This medium-width bar is ideal for structural bracing, machine ways, and general fabrication projects. In stock for Los Angeles pickup. Learn More

1-1/2" x 3/8" 1018 Cold Rolled Flat Bar in 144" lengths. Conforms to ASTM A108, delivering 63,800 PSI tensile strength with excellent machinability. The cold drawn process provides a smooth, scale-free finish and tight dimensional tolerances. This medium width is ideal for structural bracing, machine ways, base plates, and custom fabrication projects. In stock for Los Angeles pickup. Learn More

2" x 3/8" 1018 Cold Rolled Steel Flat Bar, 144" length. Conforms to ASTM A108 with 63,800 PSI tensile strength. This grade offers a smooth, scale-free finish, tight dimensional tolerances, and excellent machinability. Its medium width is ideal for structural bracing, machine ways, wear strips, and general fabrication projects requiring precision. In stock Los Angeles. Learn More

3/8" x 3" 1018 Cold Rolled Flat Bar, 144" length. Conforms to ASTM A108 specifications with 63,800 PSI tensile strength and a clean, scale-free surface. Its excellent machinability and tight dimensional tolerances make it a reliable choice for manufacturing. This medium-width bar is ideal for structural bracing, base plates, and machine components. In stock for Los Angeles pickup. Learn More

4" x 3/8" 1018 Cold Rolled Steel Flat Bar in a 144" length. This bar meets ASTM A108 standards, providing 63,800 PSI tensile strength, a smooth scale-free finish, and tight dimensional tolerances. Its large width makes it ideal for base plates, heavy structural bracing, and die components where precision and strength are required. In stock and available for same-day pickup in Los Angeles. Learn More

This 6 inch by 3/8 inch 1018 Cold Rolled Steel Flat Bar offers tight dimensional tolerances and a smooth, scale-free surface. Conforming to ASTM A108, it has a tensile strength of 63,800 PSI and excellent machinability. Its large width makes it ideal for base plates, structural gussets, and heavy equipment mounting. In stock for Los Angeles pickup. Learn More

1/2" x 3/4" 1018 Cold Rolled Steel Flat Bar, sold in 144" lengths. This product meets ASTM A108 specifications and offers 63,800 PSI tensile strength, a smooth surface finish, and tight dimensional tolerances. Its excellent machinability and good weldability make it a versatile choice. The small profile is ideal for brackets, straps, and shims. In stock for Los Angeles pickup. Learn More

1" x 1/2" 1018 Cold Rolled Steel Flat Bar in 144" lengths. This bar conforms to ASTM A108 and features a tensile strength of 63,800 PSI. The cold drawing process provides tight dimensional tolerances and a clean, scale-free surface, making it ideal for precision machining. A versatile choice for structural bracing, base plates, and custom machinery components. In stock Los Angeles. Learn More

1-1/4" x 1/2" Cold Rolled 1018 Steel Flat Bar, 144" length. Conforms to ASTM A108 with 63,800 PSI tensile strength. The cold drawing process provides a smooth, scale-free finish and tight dimensional tolerances, making it excellent for machining. This medium-width bar is ideal for structural bracing, machine ways, base plates, and mounting brackets. In stock for Los Angeles pickup. Learn More

1-1/2" x 1/2" 1018 Cold Rolled Steel Flat Bar, sold in 144" lengths. This bar meets ASTM A108 standards, offering 63,800 PSI tensile strength, a smooth surface finish, and tight dimensional tolerances. Its excellent machinability and good weldability make it a versatile choice for fabricating brackets, machine ways, and base plates. In stock and ready for same-day pickup in Los Angeles. Learn More

1/2" x 2" 1018 Cold Rolled Flat Bar, 144" length. Conforms to ASTM A108, offering a smooth, scale-free finish and tight dimensional tolerances. With a tensile strength of 63,800 PSI and excellent machinability, it's ideal for manufacturing brackets, base plates, and machine ways where precision is required. In stock for immediate Los Angeles pickup. Learn More

3" x 1/2" 1018 Cold Rolled Flat Bar in 144" lengths. Conforms to ASTM A108 and features a tensile strength of 63,800 PSI. This grade offers excellent machinability and good weldability combined with a smooth, scale-free surface. Its medium width is ideal for structural bracing, machine ways, and durable base plates. In stock for immediate Los Angeles pickup. Learn More

A 4" x 1/2" 1018 Cold Rolled Steel Flat Bar, supplied in 144" lengths. Conforming to ASTM A108, this bar features a 63,800 PSI tensile strength, tight dimensional tolerances, and excellent machinability. The smooth, scale-free surface is ready for fabrication. Its substantial width makes it ideal for base plates, heavy structural bracing, and die components. In stock for Los Angeles pickup. Learn More

6" x 1/2" 1018 Cold Rolled Steel Flat Bar, 144" length. Conforms to ASTM A108 with 63,800 PSI tensile strength and excellent machinability. The cold drawing process provides tight dimensional tolerances and a smooth, scale-free finish. Its substantial 6-inch width makes it ideal for base plates, heavy structural components, and die sets. In stock for Los Angeles pickup. Learn More

3" x 5/8" 1018 Cold Rolled Steel Flat Bar, 144" length. Conforms to ASTM A108 with 63,800 PSI tensile strength, excellent machinability, and superior dimensional tolerances. Its smooth, scale-free surface is ideal for painting or plating. This medium-width bar is used for structural bracing, machine ways, and base plates. In stock for same-day Los Angeles pickup. Learn More

1018 Cold Rolled Steel Flat Bar, measuring 1" wide by 3/4" thick in a 144" length. Conforms to ASTM A108 and offers 63,800 PSI tensile strength. The cold drawn process provides tight dimensional tolerances and a clean, smooth surface ideal for machining and welding. Excellent for fabricating brackets, base plates, and machine components. In stock Los Angeles. Learn More

3" x 3/4" 1018 Cold Rolled Steel Flat Bar, 144" length. Conforms to ASTM A108. Features a smooth, scale-free surface, tight tolerances, and excellent machinability. With 63,800 PSI tensile strength, it's ideal for base plates, brackets, and fixtures. This medium-width bar provides robust structural support for fabrication and machinery projects. In stock Los Angeles. Learn More

1-1/2" x 1" 1018 Cold Rolled Steel Flat Bar, 144" length. Conforms to ASTM A108 with 63,800 PSI tensile strength and excellent machinability. The cold drawing process provides a smooth, scale-free surface and tight dimensional tolerances. This medium-width bar is ideal for structural bracing, machine ways, and base plates requiring precision and a clean finish. In stock for Los Angeles pickup. Learn More

2" x 1" 1018 Cold Rolled Steel Flat Bar, 144" length. Conforms to ASTM A108 with a tensile strength of 63,800 PSI and a smooth, scale-free surface. This material offers excellent machinability and tight dimensional tolerances, making it ideal for precision applications like machine ways, mounting brackets, and structural bracing. In stock for same-day Los Angeles pickup. Learn More

3/16" 1018 Cold Rolled Steel Hex Bar in 144" lengths. Produced to ASTM A108 specifications, this bar offers a 63,800 PSI tensile strength, tight dimensional tolerances, and a clean, smooth surface finish. Its good machinability makes it ideal for producing small fasteners, fittings, and precision hardware. In stock for Los Angeles pickup. Learn More

5/16" Cold Rolled 1018 Hexagon Bar, 144" length. Meets ASTM A108 specifications. This low-carbon steel bar offers 63,800 PSI tensile strength, a smooth surface finish, and tight dimensional tolerances from the cold drawing process. Its excellent machinability and good weldability make it suitable for producing fasteners, shafts, hydraulic fittings, and other precision machined components. In stock for same-day Los Angeles pickup. Learn More

9/16" 1018 Cold Rolled Hexagon Bar, 144" length. Conforms to ASTM A108 specifications with 63,800 PSI tensile strength and excellent machinability. The cold drawn process provides a smooth finish and tight dimensional tolerances. This medium-sized hex bar is ideal for manufacturing fasteners, shafts, hydraulic fittings, and other machined components. In stock for immediate Los Angeles pickup. Learn More

5/8 inch 1018 Cold Rolled Hexagon Bar, 144" length. Conforms to ASTM A108 with 63,800 PSI tensile strength. The cold drawing process provides a smooth surface, tight dimensional accuracy, and excellent machinability. This medium-sized bar is ideal for manufacturing nuts, standoffs, hydraulic fittings, and machinery shafts. In stock for Los Angeles pickup. Learn More

1 inch 1018 Cold Rolled Steel Hexagon Bar, 144-inch length. Conforms to ASTM A108 standards, delivering 63,800 PSI tensile strength and excellent machinability. Its smooth finish and tight tolerances make it ideal for fasteners, nuts, hydraulic fittings, and machined components requiring a hex shape for gripping. In stock for same-day Los Angeles pickup. Learn More

1/8" diameter 1018 Cold Rolled Steel Round Bar, 144" length. Conforms to ASTM A108 with a tensile strength of 63,800 PSI. The cold drawn process provides a smooth, scale-free finish and tight dimensional tolerances. This small diameter is ideal for manufacturing precision pins, dowels, fastener blanks, and small shafts. In stock for Los Angeles pickup. Learn More

3/16" diameter 1018 Cold Rolled Round Bar, sold in 144" lengths. Conforms to ASTM A108 with 63,800 PSI tensile strength and excellent machinability. The cold drawing process provides tight dimensional tolerances and a smooth, clean finish. This small-diameter rod is ideal for manufacturing pins, dowels, small shafts, and fastener blanks. In stock for Los Angeles pickup. Learn More

1/4" diameter 1018 Cold Rolled Round Bar, 144" length. Conforms to ASTM A108 with 63,800 PSI tensile strength and excellent machinability. This cold drawn bar has tight tolerances and a smooth finish, ideal for small shafts, pins, dowels, and fastener blanks. In stock for Los Angeles pickup. Learn More

5/16 inch diameter 1018 Cold Rolled Round Bar, sold in 144-inch lengths. Conforms to ASTM A108 specifications, offering 63,800 PSI tensile strength, tight dimensional tolerances, and excellent machinability. Its smooth, scale-free surface is ideal for precision parts like pins, dowels, small shafts, and fastener blanks. In stock for same-day Los Angeles pickup. Learn More

3/8" diameter 1018 Cold Rolled Round Bar in 144" lengths. This general-purpose steel conforms to ASTM A108, offering 63,800 PSI tensile strength, superior dimensional tolerances, and a smooth finish. Its excellent machinability makes it ideal for producing pins, dowels, fastener blanks, and small shafts requiring precision and good weldability. In stock for Los Angeles pickup. Learn More

7/16 inch diameter 1018 Cold Rolled Round Bar in 144-inch lengths. Produced to ASTM A108 standards, this bar offers 53,700 PSI yield strength, excellent machinability, and a smooth, scale-free surface. Its tight dimensional tolerances make it ideal for high-precision applications. This small diameter is perfect for manufacturing dowel pins, small shafts, and fastener blanks. In stock for immediate Los Angeles pickup. Learn More

1/2" diameter 1018 Cold Rolled Steel Round Bar, 144" length. Conforms to ASTM A108 with 63,800 PSI tensile strength and a smooth, scale-free finish. Known for its excellent machinability and tight dimensional tolerances, this medium-diameter bar is ideal for manufacturing shafts, axles, bushings, and other precision machined components. In stock for Los Angeles pickup. Learn More

5/8" diameter 1018 Cold Rolled Steel Round Bar, 144" length. This bar conforms to ASTM A108 and offers 63,800 PSI tensile strength, superior dimensional tolerance, and a smooth, scale-free surface. Its excellent machinability and good weldability make it a versatile choice for shafts, axles, pins, and custom machined components. In stock for same-day Los Angeles pickup. Learn More

This 3/4" diameter 1018 Cold Rolled Round Bar is a 144-inch low-carbon steel product conforming to ASTM A108. It offers a tensile strength of 63,800 PSI, superior dimensional accuracy, and a smooth, scale-free surface. Known for its excellent machinability and good weldability, it is ideal for producing shafts, axles, and precision machined components. In stock for immediate pickup in Los Angeles. Learn More

7/8 inch diameter 1018 Cold Rolled Round Bar, sold in 144-inch lengths. Conforms to ASTM A108 with 63,800 PSI tensile strength and excellent machinability. The cold drawn process provides a smooth finish and tight dimensional tolerances. This medium-diameter bar is ideal for shafts, axles, pins, and general-purpose machined components. In stock for Los Angeles pickup. Learn More

1" diameter 1018 Cold Rolled Steel Round Bar, 144" length. Conforming to ASTM A108, this bar has a tensile strength of 63,800 PSI and excellent machinability. Its smooth, scale-free surface and tight dimensional tolerances make it ideal for shafts, axles, pins, and custom machined parts requiring precision. In stock Los Angeles. Learn More

1-1/4" diameter 1018 Cold Rolled Round Bar, 144" length. Conforming to ASTM A108, this general-purpose steel has 63,800 PSI tensile strength and excellent machinability. The cold drawn process provides a smooth, scale-free finish and tight dimensional tolerances, making it ideal for shafts, axles, and precision machined components. In stock for Los Angeles pickup. Learn More

1-7/8" diameter 1018 Cold Rolled Round Bar, 144" length. Conforms to ASTM A108 with 53,700 PSI yield strength and excellent machinability. The cold drawn process provides a smooth finish and tight dimensional tolerances. This medium-diameter bar is ideal for manufacturing shafts, axles, pins, and various machined components requiring strength and precision. In stock for Los Angeles pickup. Learn More

1/4" x 1/4" 1018 Cold Rolled Steel Square Bar, 144" length. Conforms to ASTM A108 with 63,800 PSI tensile strength, excellent machinability, and tight dimensional tolerances. The cold drawn finish provides a clean, smooth surface ideal for precision parts. This small square bar is perfect for shafts, dowels, pins, and fixtures. In stock for Los Angeles pickup. Learn More

3/8" x 3/8" 1018 Cold Rolled Steel Square Bar, 144" length. Conforms to ASTM A108 with a tensile strength of 63,800 PSI. The cold drawing process provides tight dimensional tolerances and a clean, smooth surface finish, ideal for machining. This small size is excellent for shafts, dowels, pins, and fixtures. In stock for Los Angeles pickup. Learn More

1/2" x 1/2" 1018 Cold Rolled Square Bar in 144" lengths. Produced to ASTM A108 standards, this low-carbon steel offers a clean surface, tight dimensional tolerances, and excellent machinability. With a tensile strength of 63,800 PSI, it is ideal for medium-duty applications like shafts, fixtures, and precision machined components where a superior finish is required. In stock for Los Angeles pickup. Learn More

5/8" x 5/8" 1018 Cold Rolled Square Bar in 144" lengths. Produced to ASTM A108 standards, this bar offers a tensile strength of 63,800 PSI, excellent machinability, and a superior surface finish. Its tight dimensional tolerances make it ideal for shafts, fixtures, and precision machined components requiring minimal prep work. In stock for same-day Los Angeles pickup. Learn More