Search results for: 'sheet+metal+7+grade'

Our Pacific Brown industrial-grade paint features advanced Direct-to-Metal (DTM) technology for superior corrosion protection. This durable alkyd coating is engineered for single-coat application on prepared metal surfaces, ideal for demanding MRO and fabrication projects. Learn More

Our industrial-grade red DTM paint is a high-performance, oil-based alkyd coating designed for superior corrosion protection. This direct-to-metal formula saves time by eliminating the need for a separate primer, ideal for demanding fabrication and MRO projects. Learn More

This industrial-grade Safety Yellow DTM (Direct-to-Metal) paint provides exceptional corrosion protection in a single coat. Formulated as a high-performance alkyd coating, it's engineered for durability on steel and other metal surfaces. Ideal for MRO and new fabrication projects. Learn More

Our Industrial-Grade Gloss Black DTM Paint is a high-performance alkyd coating designed for direct application on metal. It provides excellent corrosion resistance and a durable, high-gloss finish suitable for demanding fabrication and MRO environments. Learn More

Our industrial-grade DTM Clear Coat is a high-performance alkyd coating designed for direct application on metal surfaces. It provides exceptional corrosion resistance and a durable, transparent finish ideal for MRO and fabrication projects. Learn More

Our industrial-grade Gray DTM (Direct-to-Metal) Paint is a high-performance alkyd coating designed for superior corrosion resistance. This single-coat system, formulated to meet rigorous industrial performance criteria, acts as both a primer and topcoat, ideal for protecting steel and iron surfaces. Learn More

Hanover Green DTM is an industrial-grade, direct-to-metal coating engineered for superior corrosion protection. Its durable alkyd formulation provides a long-lasting, semi-gloss finish on steel surfaces, ideal for professional fabrication and MRO. Learn More

This industrial-grade, direct-to-metal (DTM) semi-gloss black paint is an alkyd-based enamel designed for superior corrosion protection. It provides a durable, weather-resistant finish on metal surfaces without requiring a separate primer, making it ideal for MRO and fabrication projects. Learn More

This industrial-grade Gloss White paint features advanced Direct-to-Metal (DTM) technology for superior single-coat application. Formulated as a durable alkyd coating, it provides excellent corrosion and weather resistance for demanding MRO and fabrication projects. Learn More

This 7" x 1.6mm cut-off wheel features a 7/8" arbor hole, making it compatible with most standard angle grinders. Rated for a maximum speed of 8,500 RPM, this abrasive disc is engineered for fast, burr-free cutting of steel, stainless steel, and other ferrous metals. Its thin kerf design minimizes material waste and provides a clean finish. Ideal for fabrication and metalworking shops. In stock Los Angeles. Learn More

The Morse Metal Devil NXT circular saw blade (7-1/4" dia., 5/8" arbor, 48 teeth) is engineered for fast, smooth cuts in metal. Its carbide-tipped teeth provide exceptional durability when cutting steel, aluminum, and stainless steel. Rated for up to 5800 RPM, this blade delivers burr-free finishes, reducing the need for secondary grinding. Ideal for fabricators and contractors. In stock Los Angeles. Learn More

This industrial-grade 7” x ¼” x ⅞” grinding disc is engineered for high-performance metal grinding. Compliant with ANSI B7.1 safety standards, it features durable aluminum oxide abrasive material and fiberglass reinforcement for reliability. Rated for a maximum speed of 8,500 RPM. Learn More

This industrial-grade, oil-based black primer is engineered for direct-to-metal (DTM) applications, providing a durable foundation for topcoats. Its robust alkyd formulation ensures excellent adhesion and superior corrosion resistance for fabrication and MRO projects. Learn More

Our 7-inch barrel hinges are engineered from heavy-duty, weldable carbon steel for maximum durability and strength. Designed for high-load applications, these hinges provide a smooth, reliable pivot for industrial gates and security doors. The robust construction ensures long-lasting performance in demanding MRO and fabrication environments. Learn More

This 6" x .040" x 7/8" Cut-Off Wheel is an industrial-grade abrasive cutting disc designed for high-speed cutting. Compliant with ANSI B7.1 safety standards, it features fiberglass reinforcement for enhanced durability and operator safety. Ideal for cutting steel, iron, and other metals. Learn More

High-performance 40-grit zirconia flap disc for aggressive material removal and finishing. Compliant with ANSI B7.1 safety standards, this 4.5" x 7/8" disc is engineered for grinding steel and other ferrous metals. Its durable zirconia abrasive ensures a long service life in demanding MRO and fabrication applications. Learn More

This 12" x 7/64" Cut-Off Wheel is an industrial-grade abrasive tool compliant with ANSI B7.1 safety standards. Engineered with fiberglass reinforcement for a maximum speed of 5,100 RPM, it is designed for fast, clean cuts on various metals. The 1" arbor hole fits standard stationary cut-off machines. Learn More

This 4-1/2" x .040" x 7/8" cut-off wheel is an industrial-grade abrasive engineered for high-speed cutting. It is ANSI B7.1 compliant and features fiberglass reinforcement for enhanced safety and durability during metal fabrication and MRO tasks. Learn More

Our industrial-grade, oil-based white primer is an alkyd formulation designed for superior adhesion on metal surfaces. It provides an excellent foundation for topcoats, ensuring long-lasting corrosion protection for fabrication and MRO projects. Ideal for direct-to-metal (DTM) surface preparation. Learn More

Our Industrial Grade Oil-Based White Primer is a high-solids, alkyd-based coating designed for superior adhesion and corrosion protection on metal surfaces. This direct-to-metal (DTM) primer provides a durable foundation for topcoats in demanding MRO and fabrication applications. Learn More

Industrial-grade Acetone is a powerful, fast-evaporating solvent designed for cleaning and degreasing metal surfaces. It effectively removes oils, grease, and contaminants, ensuring optimal surface preparation for painting or welding. Conforms to industrial purity standards like ASTM D329. Learn More

A versatile, industrial-grade lacquer thinner for reducing paint viscosity and cleaning metal surfaces. This fast-evaporating solvent ensures optimal paint flow and prepares substrates for DTM coatings. Ideal for use with alkyd and oil-based industrial paints. Learn More

These 7" J-Bolt Adjustable Barrel Hinges are engineered from high-strength steel for maximum durability in heavy-duty applications. Designed for weld-on installation, they provide a smooth, reliable pivot for industrial gates and doors. The adjustable J-bolt allows for precise alignment and tensioning. Learn More

3003-H14 Aluminum Sheet, 0.0604" thick, 48" wide, and 120" long. This versatile alloy conforms to ASTM B209 and offers an excellent combination of moderate strength (22,000 PSI tensile), high ductility, and superior corrosion resistance. Its excellent formability makes it a top choice for general sheet metal work, HVAC ducting, fan blades, and automotive panels. In stock for immediate pickup in Los Angeles. Learn More

Grade 60 Hot Rolled Rebar, #7 size (7/8" diameter) in 20-foot lengths. Meets ASTM A615 standards with a minimum yield strength of 60,000 PSI and tensile strength of 90,000 PSI. Its deformed surface provides a superior mechanical bond with concrete, making it essential for reinforcing foundations, slabs, and columns. In stock for same-day Los Angeles pickup. Learn More

14 Gauge (0.075") Galvanized Steel Sheet, 48" x 120". Conforming to ASTM A653, this hot-dip zinc-coated steel provides excellent corrosion resistance for outdoor and high-moisture applications. Its base metal offers up to 80,000 PSI tensile strength, combining durability with formability. Ideal for HVAC ductwork, roofing panels, automotive components, and agricultural equipment. In stock for immediate Los Angeles pickup. Learn More

This industrial-grade gray primer features a high-performance oil-based (alkyd) formulation for superior adhesion and corrosion resistance. It serves as an excellent foundation for topcoats on steel and other metal surfaces in demanding MRO and fabrication environments. Learn More

14 Gauge (48" x 120") 1018 Cold Rolled Steel Sheet, conforming to ASTM A1008. Features 63,800 PSI tensile strength, superior dimensional tolerance, and an exceptionally smooth surface finish ideal for painting or powder coating. Excellent formability makes it a top choice for automotive panels, appliance casings, metal enclosures, and precision stamped parts. In stock for same-day pickup in Los Angeles. Learn More

0.125" x 48" x 120" 3003-H14 Aluminum Sheet. This versatile sheet conforms to ASTM B209, offering excellent formability, weldability, and good corrosion resistance. With a tensile strength of 22,000 PSI, this medium-thickness sheet is ideal for structural panels, machine guards, trailer siding, and general sheet metal fabrication. In stock for same-day cutting and pickup in Los Angeles. Learn More

This 5” x .040” cut-off wheel is engineered for high-speed cutting of metal. It is an ANSI B7.1 compliant abrasive wheel featuring durable fiberglass reinforcement for safety and performance. Rated for a maximum of 12,200 RPM, it delivers precise, clean cuts in fabrication and MRO applications. Learn More

This 1-1/2" x 3-7/8" oval welding tab is manufactured from high-quality, weldable mild steel for superior strength and ease of use. At 9 gauge (0.15") thick with two pre-drilled holes, it provides a robust mounting point for industrial fabrication and MRO projects. Learn More

7/8" x 48" x 120" Hot Rolled Steel Plate, grade A36. Conforms to ASTM A36 with a minimum yield strength of 36,000 PSI and excellent weldability. This heavy-gauge plate is ideal for structural base plates, gussets, heavy equipment mounting, and general fabrication projects where strength and durability are critical. In stock Los Angeles. Learn More

0.063" x 48" x 96" (4x8) sheet of 3003-H14 Aluminum. This versatile alloy meets ASTM B209 standards and provides an excellent combination of moderate strength (22,000 PSI tensile), high ductility, and superior corrosion resistance. Its excellent formability makes it ideal for general sheet metal work, HVAC ductwork, fuel tanks, and fan blades. In stock for immediate Los Angeles pickup. Learn More

Metalize Industrial Primer is a high-performance alkyd coating engineered for superior corrosion resistance on metal surfaces. Formulated to meet rigorous MIL-SPEC performance criteria, it provides an excellent foundation for DTM (Direct-to-Metal) applications. Ideal for demanding industrial, MRO, and fabrication projects. Learn More

This industrial-grade, oil-based gray primer provides exceptional adhesion and corrosion resistance for metal surfaces. Formulated as an alkyd coating, it creates a durable foundation for topcoats in demanding fabrication and MRO applications. Learn More

This 60 Grit Zirconia Flap Disc is a high-performance abrasive for rapid stock removal and finishing on steel and other metals. It is engineered with a durable zirconia alumina grain and complies with ANSI B7.1 safety standards. The Type 29 conical shape is ideal for aggressive grinding. Learn More

7/8" diameter 303 Stainless Steel Round Bar, 144" length. This free-machining grade conforms to ASTM A582, offering 90,000 PSI tensile strength and excellent machinability for high-speed production. Its balanced properties make it a top choice for machined components like shafts, axles, and fittings. In stock for immediate pickup in Los Angeles. Learn More

16 gauge Cold Rolled Steel Sheet (48" x 120"), typically 1018 grade. Features 63,800 PSI tensile strength, excellent formability, and a smooth, clean surface that is ideal for painting and finishing. This thin gauge sheet is perfect for automotive panels, appliance casings, custom brackets, and enclosures. In stock for same-day Los Angeles pickup. Learn More

Our Gloss White DTM Oil-Based Paint is an industrial-grade alkyd coating designed for superior corrosion protection. This direct-to-metal formula ensures a durable, high-gloss finish on steel and other metal surfaces, ideal for demanding fabrication and MRO applications. Learn More

11 Gauge Cold Rolled Steel Sheet, measuring 48" x 120". Produced from 1018 grade steel, this sheet conforms to ASTM A1008 standards and features a tensile strength of 63,800 PSI. Its smooth, oiled surface and superior dimensional tolerance make it ideal for automotive panels, appliance casings, and enclosures where a paint-ready finish is critical. In stock for same-day pickup in Los Angeles. Learn More

0.063" x 48" x 120" 5052-H32 Aluminum Sheet. Conforming to ASTM B209, this sheet provides a balance of strength (33,000 PSI tensile) and excellent formability. Its superior corrosion resistance makes it ideal for marine environments, fuel tanks, and automotive body panels. This medium-gauge sheet offers excellent weldability for fabricated assemblies. Available for same-day pickup in Los Angeles. Learn More

0.100" thick 3003-H14 Aluminum Sheet, 48" x 120". Conforms to ASTM B209 and provides a good balance of moderate strength, formability, and excellent corrosion resistance. This grade has a tensile strength of 22,000 PSI and is easily welded. The medium thickness is ideal for structural panels, machine guards, and vehicle body panels. In stock for immediate Los Angeles pickup. Learn More

12 Gauge (48" x 120") Cold Rolled Steel Sheet, typically 1018 grade. Conforms to ASTM A1008 specifications and provides a tensile strength of 63,800 PSI. The cold reduction process creates a smooth, clean surface finish and tight dimensional tolerances, making it ideal for forming and welding. Excellent for automotive panels, appliance casings, and equipment enclosures. In stock for Los Angeles pickup. Learn More

0.040" x 48" x 120" sheet of 5052-H32 Aluminum, a non-heat-treatable alloy known for excellent formability and corrosion resistance. This sheet meets ASTM B209 standards and has a tensile strength of 33,000 PSI. Its thin gauge is ideal for creating formed brackets, electronic enclosures, and decorative panels. In stock Los Angeles. Learn More

20 Gauge (0.0359") 304 Stainless Steel Sheet, measuring 48" x 120". Conforming to ASTM A240, this versatile sheet offers 73,200 PSI tensile strength, excellent corrosion resistance, and superior formability. The 2-B mill finish is suitable for a wide range of uses. Its thin gauge is ideal for formed brackets, electronic enclosures, and decorative panels. In stock for immediate Los Angeles pickup. Learn More

A 7/16" diameter 6061-T6 Aluminum Round Bar, 144" long. Conforms to ASTM B211 and delivers 45,000 PSI tensile strength. This versatile alloy combines excellent machinability, superior corrosion resistance, and good weldability. The small diameter is ideal for creating precision turned parts, fastener blanks, dowels, and custom brackets. In stock for immediate Los Angeles pickup. Learn More

7/8" diameter 6061-T6 Aluminum Round Bar, 144" length. Conforms to ASTM B211, offering a high strength-to-weight ratio with 45,000 PSI tensile strength. This versatile alloy provides excellent machinability, weldability, and corrosion resistance. Its medium diameter is ideal for shafts, axles, spacers, and custom machined components. In stock for same-day Los Angeles pickup. Learn More

0.090" x 48" x 120" 3003-H14 Aluminum Sheet. Conforming to ASTM B209, this material features 22,000 PSI tensile strength, excellent formability, and good corrosion resistance. This versatile, medium-gauge sheet is ideal for vehicle body panels, machine guards, and general fabrication projects requiring moderate strength. In stock for immediate pickup in Los Angeles. Learn More

12 Gauge (0.105") Galvanized Steel Sheet, 48" x 120". This sheet conforms to ASTM A653 and features a protective zinc coating applied via a hot-dip process for excellent corrosion resistance. Its medium thickness provides a balance of strength and formability, making it ideal for structural panels, HVAC ductwork, automotive components, and outdoor enclosures. In stock for same-day Los Angeles pickup. Learn More

22 Gauge (0.0299") Cold Rolled Steel Sheet, measuring 48" x 120". Typically produced from 1018 steel, this sheet offers a smooth, scale-free surface, superior dimensional tolerance, and excellent formability. Its thin gauge is perfect for automotive panels, appliance casings, electronic enclosures, and other applications requiring a paint-ready finish. In stock for same-day Los Angeles pickup. Learn More

7/8 inch diameter Cold Rolled All Thread Rod in 10-foot lengths. This zinc-plated, low-carbon steel rod meets the strength requirements of ASTM A307 Grade A, with a typical tensile strength of 63,800 PSI. The zinc plating provides moderate corrosion resistance for versatile use. It is ideal for general-purpose fastening, anchoring, and support systems in construction and manufacturing. In stock for immediate Los Angeles pickup. Learn More

Our Gloss Black DTM Oil-Based Paint is an industrial-grade alkyd coating designed for superior corrosion resistance. This direct-to-metal formula provides a durable, high-gloss finish ideal for demanding MRO and fabrication applications. Learn More

7/16" x 48" x 120" A36 Hot Rolled Steel Plate, compliant with ASTM A36 standards. This structural plate offers a minimum yield strength of 36,000 PSI and excellent weldability, making it ideal for robust applications. Its large thickness is perfect for fabricating column base plates, heavy equipment mounting pads, wear plates, and structural gussets. In stock for immediate pickup in Los Angeles. Learn More

20 Gauge Galvanized Steel Sheet, 48" x 120" (4' x 10'). Conforms to ASTM A653, featuring a protective zinc coating for excellent corrosion resistance in outdoor environments. This thin gauge sheet is ideal for forming brackets, electronic enclosures, decorative panels, and HVAC ductwork. It combines the strength of steel with the durability of galvanization. In stock for immediate Los Angeles pickup. Learn More

7/8" OD x 0.065" wall Hot Rolled Steel Round Tube, 20 ft length. Conforms to ASTM A500 Grade B with 58,000 PSI tensile strength. This grade offers excellent weldability and durability for structural applications. The small diameter is ideal for lightweight frames, supports, furniture fixtures, and custom fabrication projects where strength is required. In stock for Los Angeles pickup. Learn More

This industrial-grade, oil-based DTM (Direct-to-Metal) paint offers a durable flat black finish. Engineered for superior adhesion and corrosion resistance consistent with MIL-SPEC performance criteria, it is ideal for protecting steel and iron surfaces in fabrication and MRO projects. Learn More

7/8 inch diameter Cold Rolled All Thread Rod, 120" length, with an oil finish for rust prevention. Conforming to the strength requirements of ASTM A307 Grade A, this rod is made from low-carbon steel offering 63,800 PSI tensile strength. Its continuous threading provides versatile fastening for construction, manufacturing, and general repair. In stock for immediate Los Angeles pickup. Learn More

This industrial-grade, oil-based DTM paint delivers a durable black semi-gloss finish. Its alkyd enamel formulation provides excellent corrosion resistance and adhesion directly on prepared metal surfaces, making it ideal for fabrication and MRO projects. Learn More

7/8 inch diameter 1018 Cold Rolled Round Bar, sold in 144-inch lengths. Conforms to ASTM A108 with 63,800 PSI tensile strength and excellent machinability. The cold drawn process provides a smooth finish and tight dimensional tolerances. This medium-diameter bar is ideal for shafts, axles, pins, and general-purpose machined components. In stock for Los Angeles pickup. Learn More

7/16" diameter 304 Stainless Steel Round Bar, 144" length. Conforms to ASTM A276, this versatile bar offers 73,200 PSI tensile strength, excellent corrosion resistance, and superior weldability. Its non-magnetic properties make it suitable for a wide range of applications. This small diameter is ideal for pins, dowels, fastener blanks, and small shafts. In stock for Los Angeles pickup. Learn More

This 7/8" diameter 304 Stainless Steel Round Bar is a versatile, corrosion-resistant material ideal for a wide range of applications. Conforming to ASTM A276, it features 73,200 PSI tensile strength and excellent weldability. Its medium diameter is perfectly suited for manufacturing shafts, axles, bushings, and architectural handrails. Available in 144-inch lengths for same-day pickup in Los Angeles. Learn More

22 Gauge Galvanized Steel Sheet, measuring 48" x 120". This product conforms to ASTM A653 and features a protective hot-dip zinc coating for excellent corrosion resistance. Its thin gauge offers great formability, making it ideal for HVAC ductwork, flashing, automotive panels, and protective enclosures. Combines steel strength with long-term durability in outdoor or high-moisture environments. In stock for Los Angeles pickup. Learn More

This 0.080" x 48" x 120" 3003-H14 Aluminum Sheet provides an excellent combination of moderate strength, high ductility, and superior corrosion resistance. Conforming to ASTM B209, it offers 22,000 PSI tensile strength and is easily formed and welded. Its medium thickness is ideal for structural panels, machine guards, and vehicle body panels. In stock for immediate Los Angeles pickup. Learn More

NEW TOYOTA GRAY is a high-performance, oil-based industrial coating featuring Direct-to-Metal (DTM) technology. This industrial-grade alkyd enamel provides excellent corrosion resistance and a durable, protective finish for demanding applications on steel, iron, and equipment surfaces. Learn More

7/16 inch diameter 1018 Cold Rolled Round Bar in 144-inch lengths. Produced to ASTM A108 standards, this bar offers 53,700 PSI yield strength, excellent machinability, and a smooth, scale-free surface. Its tight dimensional tolerances make it ideal for high-precision applications. This small diameter is perfect for manufacturing dowel pins, small shafts, and fastener blanks. In stock for immediate Los Angeles pickup. Learn More

This 5” x 1/4” grinding disc is engineered for high-performance metal removal. Made from durable aluminum oxide with fiberglass reinforcement, it meets ANSI B7.1 safety standards and is rated for a maximum speed of 12,200 RPM. Learn More

A 0.032" thick, 48" x 120" sheet of 3003-H14 aluminum. Conforms to ASTM B209, offering a balance of moderate strength (22,000 PSI tensile) and excellent formability. This thin gauge is lightweight, weldable, and corrosion-resistant, making it ideal for HVAC ductwork, electronic enclosures, formed brackets, and decorative panels. In stock Los Angeles. Learn More

0.032" x 48" x 120" 5052-H32 Aluminum Sheet. Conforms to ASTM B209 with 33,000 PSI tensile strength. This non-heat-treatable alloy offers excellent formability and superior corrosion resistance, especially in marine environments. Its thin gauge is ideal for creating formed brackets, electronic enclosures, and decorative panels. In stock for immediate pickup in Los Angeles. Learn More

0.025" x 48" x 120" (4' x 10') sheet of 3003-H14 aluminum. This versatile alloy conforms to ASTM B209 and offers moderate strength, excellent formability, and good corrosion resistance. The thin 0.025" gauge is ideal for forming brackets, electronic enclosures, decorative panels, and HVAC ductwork where light weight and workability are key. In stock for same-day Los Angeles pickup. Learn More

11 Gauge (0.120") x 48" x 120" Galvanized Steel Sheet. This product conforms to ASTM A653 standards, providing excellent corrosion resistance through a protective hot-dip zinc coating. It combines the strength and formability of steel with superior durability for outdoor or high-moisture environments. Ideal for roofing, HVAC, automotive panels, and general fabrication. In stock for Los Angeles pickup. Learn More

16 Gauge (0.060") thick Galvanized Steel Sheet, 48" x 120". Conforms to ASTM A653 standards, featuring a protective zinc coating for excellent corrosion resistance in outdoor or high-moisture environments. This versatile thickness is ideal for HVAC ductwork, electrical enclosures, flashing, and light-duty fabrication. Combines the strength of steel with superior rust protection. In stock for Los Angeles pickup. Learn More

0.0404" x 48" x 120" (4'x10') 3003-H14 Aluminum Sheet. Conforms to ASTM B209, offering a balance of moderate strength (22,000 PSI tensile) and excellent formability. Its good workability and corrosion resistance make it ideal for general fabrication. This thin gauge is perfect for HVAC ductwork, formed brackets, and decorative panels. In stock for same-day pickup in Los Angeles. Learn More

The C-Scroll (5112A) is a classic decorative element forged from high-quality Class 25-30 gray iron. This architectural-grade component is designed to add an elegant, traditional finish to custom fences, gates, and railings in fabrication projects. Learn More

7" x 1/4" Hot Rolled Steel Flat Bar, 240" length. Conforms to ASTM A36 with a minimum yield strength of 36,000 PSI. This structural steel offers excellent weldability and formability. The large 7-inch width is ideal for heavy structural applications, machinery base plates, trailer frames, and support braces where strength and durability are critical. In stock for Los Angeles pickup. Learn More

1-7/8" diameter 1018 Cold Rolled Round Bar, 144" length. Conforms to ASTM A108 with 53,700 PSI yield strength and excellent machinability. The cold drawn process provides a smooth finish and tight dimensional tolerances. This medium-diameter bar is ideal for manufacturing shafts, axles, pins, and various machined components requiring strength and precision. In stock for Los Angeles pickup. Learn More

Pacific Brown DTM is a high-performance, oil-based (alkyd) industrial coating designed for direct application to metal. It provides excellent corrosion resistance and a durable finish, making it ideal for demanding MRO and fabrication projects. Learn More

24 Gauge (0.0239") 304 Stainless Steel Sheet, 48" x 120", with a 2-B mill finish. Conforming to ASTM A240, this versatile sheet offers excellent corrosion resistance, high ductility, and 73,200 PSI tensile strength. Its thin gauge is ideal for forming electronic enclosures, decorative panels, and food processing applications. In stock for same-day Los Angeles pickup. Learn More

This Safety Yellow industrial coating features advanced Direct-to-Metal (DTM) oil-based alkyd technology for superior adhesion and corrosion protection. It provides a durable, high-visibility finish ideal for MRO and equipment applications, meeting industrial performance benchmarks. Learn More

14 Gauge (48" x 120") A36 Hot Rolled Steel Sheet. Conforms to ASTM A36 with a minimum yield strength of 36,000 PSI. This versatile material offers excellent weldability and good formability, making it a cost-effective choice for various applications. Ideal for structural panels, machine guards, trailer frames, and general fabrication projects. In stock for same-day Los Angeles pickup. Learn More

18 Gauge Galvanized Steel Sheet (4' x 10'). Conforming to ASTM A653, this sheet features a hot-dip zinc coating for excellent rust and corrosion resistance. The thin 18 gauge thickness is easy to form, making it ideal for HVAC ductwork, automotive panels, roofing, and protective enclosures. Its base steel provides good strength and durability for various fabrication projects. In stock for Los Angeles pickup. Learn More

10 Gauge Cold Rolled Steel Sheet, 48" x 120". Made from commercial quality steel (1018 typical) with a tensile strength of 63,800 PSI. The cold rolling process provides a smooth, scale-free surface and tight dimensional tolerances, making it ideal for forming, stamping, and welding. Perfect for automotive panels, appliance casings, and equipment enclosures. In stock and ready for same-day pickup in Los Angeles. Learn More

16 Gauge (48" x 120") A36 Hot Rolled Steel Sheet. This material conforms to ASTM A36 and offers a minimum yield strength of 36,000 PSI, providing excellent weldability and good formability. Its medium thickness is ideal for structural panels, machine guards, trailer frames, and general fabrication projects where precise dimensions are not critical. A cost-effective solution for robust applications. In stock for Los Angeles pickup. Learn More

18 Gauge (0.0478") 1018 Cold Rolled Steel Sheet, 48" wide by 120" long. This material offers a smooth, scale-free surface, superior dimensional tolerance, and excellent formability for bending and stamping. With good weldability and 63,800 PSI tensile strength, it is a versatile choice for applications requiring a precise, paint-ready surface, such as electronic enclosures and automotive panels. In stock for Los Angeles pickup. Learn More

0.125" x 48" x 120" 5052-H32 Aluminum Sheet, a non-heat-treatable alloy with excellent formability and superior corrosion resistance, especially in marine environments. Conforming to ASTM B209, it offers 33,000 PSI tensile strength. This versatile medium-thickness sheet is ideal for fabricating fuel tanks, boat hulls, and vehicle body panels where durability and workability are required. In stock for immediate pickup in Los Angeles. Learn More

16 Gauge (0.0625") 304 Stainless Steel Sheet, 48" x 120", with a protective #4 brushed PVC finish. This versatile sheet conforms to ASTM A240 and offers 73,200 PSI tensile strength, excellent formability, and corrosion resistance. Ideal for architectural applications, kitchen backsplashes, and decorative panels. In stock for Los Angeles pickup. Learn More

20 Gauge Cold Rolled Steel Sheet, 4' x 10' size. Grade 1018, conforming to ASTM A1008. Features a smooth, clean surface finish and tight dimensional tolerances. With 63,800 PSI tensile strength, it offers excellent formability for bending and moderate drawing. This thin gauge is ideal for automotive panels, appliance casings, and electronic enclosures. In stock for immediate pickup in Los Angeles. Learn More

18 Gauge 304 Stainless Steel Sheet (48" x 120") with a #4 brushed finish and protective PVC coating. Conforming to ASTM A240, this versatile sheet offers excellent corrosion resistance, formability, and 73,200 PSI tensile strength. Its lightweight yet durable profile is ideal for architectural panels, kitchen backsplashes, and food processing equipment. In stock for same-day Los Angeles pickup. Learn More

22 Gauge 304 Stainless Steel Sheet with a #4 brushed finish and protective PVC coating, measuring 48" x 120". This versatile sheet conforms to ASTM A240, offering 73,200 PSI tensile strength and excellent corrosion resistance. Its thin gauge and clean finish make it ideal for architectural applications, kitchen backsplashes, decorative trim, and food processing equipment. In stock for Los Angeles pickup. Learn More

18 Gauge (0.0478") 304 Stainless Steel Sheet, measuring 48" x 120". This versatile sheet meets ASTM A240 standards and features 73,200 PSI tensile strength, excellent formability, and superior corrosion resistance. Its thin gauge is ideal for architectural trim, food processing equipment, kitchen backsplashes, and decorative panels. The 2-B mill finish provides a smooth, reflective surface. In stock for Los Angeles pickup. Learn More

14 Gauge (0.0781") 304 Stainless Steel Sheet, measuring 48" x 120" (4' x 10'). This versatile austenitic sheet conforms to ASTM A240, offering excellent corrosion resistance and ductility. With a tensile strength of 73,200 PSI, it's a standard for structural panels, food processing equipment, and architectural cladding. Its 2-B mill finish is suitable for a wide range of applications. In stock for Los Angeles pickup. Learn More

10 Gauge A36 Hot Rolled Steel Sheet, measuring 48" x 120". Certified to ASTM A36, this sheet offers a minimum yield strength of 36,000 PSI and tensile strength of 58,000-80,000 PSI. Its excellent weldability and good formability make it a cost-effective choice for structural applications, gusset plates, and general fabrication projects where precise tolerances are not required. In stock for immediate Los Angeles pickup. Learn More

7" x 3/8" Hot Rolled Steel Flat Bar, 240" length. Conforming to ASTM A36, this carbon structural steel offers a minimum yield strength of 36,000 PSI and excellent weldability. The large width makes it ideal for manufacturing heavy-duty base plates, structural supports, and industrial equipment frames where strength and ease of fabrication are critical. In stock for Los Angeles pickup. Learn More

7" x 5/8" A36 Hot Rolled Steel Flat Bar, sold in 240-inch (20 ft) lengths. A structural steel conforming to ASTM A36 with a minimum yield strength of 36,000 PSI. This large-format bar is ideal for heavy structural applications, base plates, equipment mounting, and general fabrication where strength and weldability are critical. In stock for immediate cutting and pickup in Los Angeles. Learn More

20 Gauge (4' x 10') 304 Stainless Steel Sheet with a #4 brushed finish and protective PVC coating. Conforms to ASTM A240 with 73,200 PSI tensile strength, excellent formability, and corrosion resistance. The thin gauge is ideal for architectural trim, kitchen backsplashes, and protective paneling. In stock for immediate Los Angeles pickup. Learn More

10 Gauge (0.135") 304 Stainless Steel Sheet with a #4 brushed finish and protective PVC coating, measuring 48" x 120". This product conforms to ASTM A240 standards, offering excellent corrosion resistance and formability. Its medium thickness is ideal for fabricating structural panels, machine guards, and food processing equipment. In stock for immediate cutting and pickup in Los Angeles. Learn More

16 Gauge (0.0598") 304 Stainless Steel Sheet, 48" x 120" with a 2-B mill finish. This versatile austenitic stainless steel conforms to ASTM A240 and offers a blend of strength (73,200 PSI tensile) and excellent corrosion resistance. Its formability makes it ideal for food and beverage equipment, architectural trim, and electronic enclosures. In stock Los Angeles for same-day pickup or delivery. Learn More

0.080" x 48" x 120" 5052-H32 Aluminum Sheet. Conforms to ASTM B209. This non-heat-treatable alloy provides 33,000 PSI tensile strength, excellent formability, and superior corrosion resistance, especially in marine environments. Ideal for fuel tanks, boat hulls, and automotive body panels where workability and durability are critical. In stock for immediate Los Angeles pickup. Learn More

High-performance 4-1/2” x 1/4” grinding disc designed for aggressive material removal. Compliant with ANSI B7.1 safety standards, this fiberglass-reinforced abrasive wheel operates at up to 13,300 RPM. Constructed from durable aluminum oxide for extended life in metal fabrication and MRO tasks. Learn More

11 Gauge (0.120") x 48" x 120" A36 Hot Rolled Steel Sheet. ASTM A36 certified, with a minimum yield strength of 36,000 PSI and excellent weldability. The medium thickness is ideal for structural panels, machine guards, trailer frames, and general fabrication. The hot rolled mill finish is suitable for applications where finish is secondary to strength. In stock for same-day Los Angeles pickup. Learn More