Search results for: 'sheets metal mors wire'

The 1/8" Cobalt Drill Bit is engineered from M35 steel with 5% cobalt for superior heat resistance when drilling hard metals. Featuring a 135° split-point geometry for precision, it is ideal for stainless steel and cast iron applications compliant with ANSI/ASME B94.11M standards. Learn More

Our 12-inch industrial door spring is engineered from high-tensile spring steel for maximum durability and cycle life. Designed to meet ASTM A227/A228 performance standards, it provides reliable tension for heavy-duty commercial and industrial doors. Features a corrosion-resistant zinc-plated finish for long-lasting use. Learn More

The 14 x 2” Hex Washer Self-Drill Screw is a high-performance fastener engineered to SAE J78 standards. It features a hardened steel point for drilling into metal without a pilot hole and a bonded neoprene washer for a weather-tight seal. The zinc plating, compliant with ASTM B633, provides excellent corrosion resistance for exterior applications. Learn More

26 Gauge x 36" x 144" Galvanized PBR (Purlin Bearing Rib) sheet, compliant with ASTM A653. Features a protective zinc coating for excellent corrosion resistance and a minimum yield strength of 36,000 PSI. This lightweight, durable panel is ideal for commercial, residential, and agricultural roofing and siding applications requiring structural integrity and weather protection. In stock for Los Angeles pickup. Learn More

This 7" x 1.6mm cut-off wheel features a 7/8" arbor hole, making it compatible with most standard angle grinders. Rated for a maximum speed of 8,500 RPM, this abrasive disc is engineered for fast, burr-free cutting of steel, stainless steel, and other ferrous metals. Its thin kerf design minimizes material waste and provides a clean finish. Ideal for fabrication and metalworking shops. In stock Los Angeles. Learn More

This 9-inch door spring is engineered from high-tensile spring steel for reliable, long-lasting tension in commercial and industrial doors. Designed for high-cycle applications, it ensures consistent performance and durability for MRO and new installations. Learn More

26 Gauge Galvanized Steel PBR (Purlin Bearing Rib) Sheet, measuring 36 inches wide by 96 inches long. Conforms to ASTM A653, offering excellent corrosion resistance from its protective zinc coating. The base steel provides a minimum 36,000 PSI yield strength for structural integrity. Ideal for residential roofing, commercial siding, and agricultural building applications. In stock and ready for pickup in Los Angeles. Learn More

0.125" thick 3003 Aluminum Diamond Plate, available in 4' x 10' sheets. Conforms to ASTM B209, offering 22,000 PSI tensile strength, good workability, and excellent corrosion resistance. The raised diamond pattern provides a durable, non-slip surface. This medium-thickness plate is ideal for structural panels, vehicle running boards, and industrial catwalks. In stock for immediate Los Angeles pickup. Learn More

Galvanized PBR sheet, 26 Gauge x 36 inches x 168 inches. Conforms to ASTM A653. Features a protective zinc coating for excellent corrosion resistance. The PBR (Purlin-Bearing Rib) profile provides structural strength for roofing and siding. Lightweight and durable, it's ideal for agricultural, commercial, and residential buildings. In stock Los Angeles. Learn More

This 14 x ¾" Hex Washer Self-Drilling Screw is designed for efficient metal-to-metal fastening. It complies with SAE J78 standards and features a zinc-plated finish per ASTM B633 for corrosion resistance. The integrated neoprene washer ensures a secure, weather-tight seal. Learn More

This 14 x 1-1/4" Hex Washer Self-Drill Screw is a self-drilling fastener designed for rapid metal-to-metal connections. Compliant with SAE J78 standards, it features a zinc-plated finish (ASTM B633) for corrosion resistance and an integrated neoprene washer for a weatherproof seal. Learn More

This 14 x 1-1/2" Hex Washer Self-Drill Screw is an industrial-grade fastener designed for efficient metal-to-metal connections. It features a zinc-plated finish per ASTM B633 for corrosion resistance and complies with SAE J78 standards. The integrated neoprene washer provides a weather-tight seal. Learn More

Our L-Clip Welding Tab is an essential component for professional fabrication. Made from high-quality, weldable low-carbon steel, this 1-1/2 x 1-1/2 tab ensures clean weld starts and strong temporary connections, designed for use in processes compliant with AWS/ASME standards. Learn More

26 Gauge Bobco Rib Galvanized Steel Sheet, measuring 36" wide by 120" long. Produced from zinc-coated carbon steel conforming to ASTM A653 standards, it provides excellent corrosion resistance and durability. The ribbed profile adds structural rigidity, making it an ideal choice for residential roofing, commercial siding, and agricultural building applications. In stock and available for same-day pickup in Los Angeles. Learn More

26 Gauge Galvanized PBR Steel Sheet, measuring 36 inches wide by 120 inches long. Conforming to ASTM A653, this panel features a protective zinc coating for excellent corrosion resistance. With a base steel yield strength of 36,000 PSI, it's ideal for roofing, siding, and agricultural structures. Its lightweight profile simplifies installation. In stock for Los Angeles pickup. Learn More

3/16" thick Hot Rolled Diamond Plate, available in 4' x 10' sheets. Produced from A36 structural steel and conforming to ASTM A786 standards for pattern, this plate provides maximum skid resistance. With a tensile strength of 58,000 PSI and excellent weldability, it is ideal for industrial flooring, ramps, truck beds, and stair treads. In stock for Los Angeles pickup. Learn More

1/8" thick Hot Rolled Steel Diamond Plate, available in 48" x 120" sheets. Made from durable A36 steel and conforming to ASTM A786 for pattern and skid resistance. This plate offers excellent weldability and strength, making it ideal for high-traffic applications like industrial flooring, ramps, stair treads, and truck bed liners. Its raised pattern provides multi-directional grip. In stock for Los Angeles pickup. Learn More

The Bobco Welding Machine MMA 160 is a portable, high-performance stick welder designed for industrial use. It delivers a stable 160-amp arc, ideal for use with AWS/ASME certified electrodes like 6010, 6013, and 7018. Its durable construction ensures reliability for both fabrication and MRO projects. Learn More

20 Gauge Galvanized Steel B-Deck sheet, measuring 36" x 144". Conforms to ASTM A653 with a zinc coating for excellent corrosion resistance. This structural panel provides a 36,000 PSI yield strength, making it ideal for roofing, flooring, and siding applications where a strong, lightweight, and weather-resistant material is required. In stock for immediate Los Angeles pickup. Learn More

1/4" Hot Rolled Diamond Plate (Tread Plate) made from A36 structural steel. This sheet measures 48" x 120" and conforms to ASTM A786 and A36 standards. It features a raised pattern for maximum skid resistance, excellent weldability, and a minimum tensile strength of 58,000 PSI. Ideal for industrial flooring, ramps, and truck beds. In stock Los Angeles. Learn More

0.063" x 48" x 120" (4'x10') 3003-H14 Aluminum Diamond Plate. This lightweight, non-slip sheet conforms to ASTM B209 standards. It offers excellent corrosion resistance, formability, and weldability. The raised diamond pattern provides grip and rigidity, making this medium-thickness plate ideal for trailer flooring, wainscoting, wall guards, and toolboxes. In stock and available for same-day Los Angeles pickup. Learn More

Industrial Coating 218 is a high-performance alkyd and epoxy formulation designed for direct-to-metal (DTM) applications. This corrosion-resistant coating provides a durable finish for industrial MRO and fabrication projects, meeting key performance benchmarks. Learn More

Bobco's 217B is an industrial-grade, direct-to-metal (DTM) alkyd enamel designed for superior corrosion protection on steel and iron surfaces. This high-performance coating is ideal for demanding MRO and fabrication applications, providing a durable, weather-resistant finish. Learn More

This 1-1/4" square pressed steel cap provides a clean, finished look for fence posts and railings. Made from durable, weldable mild steel, it protects post interiors from debris and weather. Ideal for ornamental and security fencing applications. Learn More

24 Gauge Galvanized B-Deck sheet, measuring 36" x 72". Conforming to ASTM A653, this structural panel features a protective zinc coating for excellent corrosion resistance. The base steel offers a minimum yield strength of 36,000 PSI. Ideal for roofing, floor decking, and siding in commercial and residential construction. Lightweight yet strong, it provides a durable, low-maintenance solution. In stock for Los Angeles pickup. Learn More

This industrial-grade 7” x ¼” x ⅞” grinding disc is engineered for high-performance metal grinding. Compliant with ANSI B7.1 safety standards, it features durable aluminum oxide abrasive material and fiberglass reinforcement for reliability. Rated for a maximum speed of 8,500 RPM. Learn More

This 5” x 1/4” grinding disc is engineered for high-performance metal removal. Made from durable aluminum oxide with fiberglass reinforcement, it meets ANSI B7.1 safety standards and is rated for a maximum speed of 12,200 RPM. Learn More

Industrial Hardware Consumable 218 is a high-performance solution for MRO and fabrication. Formulated to meet key industrial performance standards like ASTM C557, this product ensures durability for demanding applications on metal surfaces. Ideal for corrosion protection and general maintenance tasks. Learn More

This 4-1/2" x .040" x 7/8" cut-off wheel is an industrial-grade abrasive engineered for high-speed cutting. It is ANSI B7.1 compliant and features fiberglass reinforcement for enhanced safety and durability during metal fabrication and MRO tasks. Learn More

Industrial Coating 227 is a professional-grade, direct-to-metal (DTM) alkyd paint designed for maximum adhesion and durability. This corrosion-resistant coating meets MIL-SPEC performance criteria and is ideal for protecting steel and iron surfaces in demanding industrial environments. Learn More

The C199XL is an industrial-grade ornamental cap rail fitting designed for durability and a precise fit. Engineered from high-quality metals for architectural applications, it is a key component for constructing robust, ADA-compliant handrail systems. Learn More

Our 3-1/2x2-1/4 Weldable Butt Hinges are engineered from high-strength, low-carbon steel for maximum weld penetration and durability. These components are designed for heavy-duty applications where a permanent, strong pivot is required. Ideal for steel gates, doors, and MRO projects. Learn More

This 12" x 7/64" Cut-Off Wheel is an industrial-grade abrasive tool compliant with ANSI B7.1 safety standards. Engineered with fiberglass reinforcement for a maximum speed of 5,100 RPM, it is designed for fast, clean cuts on various metals. The 1" arbor hole fits standard stationary cut-off machines. Learn More

High-performance 4-1/2” x 1/4” grinding disc designed for aggressive material removal. Compliant with ANSI B7.1 safety standards, this fiberglass-reinforced abrasive wheel operates at up to 13,300 RPM. Constructed from durable aluminum oxide for extended life in metal fabrication and MRO tasks. Learn More

High-performance 40-grit zirconia flap disc for aggressive material removal and finishing. Compliant with ANSI B7.1 safety standards, this 4.5" x 7/8" disc is engineered for grinding steel and other ferrous metals. Its durable zirconia abrasive ensures a long service life in demanding MRO and fabrication applications. Learn More

This 60 Grit Zirconia Flap Disc is a high-performance abrasive for rapid stock removal and finishing on steel and other metals. It is engineered with a durable zirconia alumina grain and complies with ANSI B7.1 safety standards. The Type 29 conical shape is ideal for aggressive grinding. Learn More

This industrial-grade construction adhesive is engineered for high-strength bonding in demanding applications. Compliant with ASTM C557 standards, it provides a reliable bond for a wide range of materials used in MRO and fabrication projects. Ideal for securing metal, wood, and composite surfaces. Learn More

High-performance 80 grit zirconia flap disc for rapid stock removal and finishing. Compliant with ANSI B7.1 safety standards, this 4-½” x ⅞” disc is rated for 13,300 RPM. Ideal for grinding and blending on steel and other ferrous metals. Learn More

AWS A5.1 E6013 certified all-purpose welding rod for mild steel applications. This 3/32" diameter electrode provides a smooth, stable arc and easy slag removal, ideal for general fabrication and MRO. Designed for AC or DC operation in all positions. Learn More

This industrial-grade construction adhesive provides a high-strength bond for a wide range of materials. Formulated to meet ASTM C557 standards, it ensures reliable performance for demanding fabrication, construction, and MRO applications. Ideal for bonding wood, metal, concrete, and masonry. Learn More

This 4” x 1/16” x ⅜” cut-off wheel is an industrial-grade abrasive tool for high-speed cutting. Compliant with ANSI B7.1 safety standards, it features fiberglass reinforcement for enhanced durability and stability at its maximum 22,000 RPM rating. Learn More

The 1” x 3” Flower Welding Tab is a decorative and functional component for custom metal fabrication. Precision cut from 1/8” thick weldable mild steel, it provides a reliable mounting point for ornamental gates, fences, and furniture. Ideal for projects requiring both strength and aesthetic appeal. Learn More

The Super Tool Press Pliers 10" are engineered from high-strength forged alloy steel for superior gripping power and durability. Designed to meet ASME B107 standards, these industrial-grade pliers are essential for demanding fabrication and MRO tasks. Learn More

Protects steel surfaces with a high-purity, zinc-rich coating. This cold galvanized primer provides sacrificial, long-lasting corrosion resistance comparable to hot-dip galvanizing. The fast-drying formula is ideal for repairing damaged galvanized surfaces, protecting welds, and as a durable base coat for painting. In stock for immediate pickup in Los Angeles. Learn More

This 8 x ½ Pan Head Phillips Truss Screw is a versatile fastener made from low carbon steel. It features a zinc plating with CR3+ passivate compliant with ASTM B633 for reliable corrosion resistance. The wide truss head provides an excellent bearing surface for thin materials. Learn More

This 1/8" 6013 All-Purpose Welding Rod is an AWS/ASME certified electrode designed for versatile performance. Ideal for general fabrication and repair on mild steel, it offers a stable arc and easy slag removal. Packaged in a convenient 10 LB container for MRO and project use. Learn More

24 Gauge Galvanized B-Deck sheet measuring 36" wide by 96" long. Produced from zinc-coated carbon steel conforming to ASTM A653, it provides excellent corrosion resistance and structural integrity. The 'B' profile is engineered for high strength-to-weight performance, making it ideal for roof decks, mezzanine floors, and structural siding applications. In stock for immediate Los Angeles pickup. Learn More

Protect high-traffic areas with our Galvanized Corner Guard. Made from durable 16 gauge steel with a G90 galvanized coating for superior corrosion resistance, conforming to ASTM A653 standards. Ideal for industrial, commercial, and MRO applications requiring robust wall and corner protection. Learn More

The 1-1/2 Inch Post Ball Cap is a high-quality ornamental hardware component designed for fencing and architectural applications. Fabricated from durable Class 25-30 gray iron or A356 aluminum, it provides a classic, finished look to any metal post. This decorative cap is engineered for a precise fit on 1-1/2 inch square or round tubing. Learn More

14 Gauge Hot Rolled Diamond Plate, 48" x 120". Conforms to ASTM A786 (pattern) on an A36 steel base. This plate offers 58,000 PSI tensile strength, excellent weldability, and a durable, slip-resistant surface. Ideal for industrial flooring, ramps, truck beds, and stair treads where safety and durability are critical. In stock for same-day Los Angeles pickup. Learn More

The Eagle EG650 Universal Receiver upgrades your gate operator with secure rolling code technology. It can store and manage up to 30 Eagle Chrome Series remote transmitters, making it ideal for residential or small commercial applications. This receiver is designed for easy integration with a wide range of gate and garage door openers, enhancing security and convenience. In stock for same-day pickup in Los Angeles. Learn More

0.188" x 48" x 120" 3003-H14 Aluminum Plate. Meets ASTM B209 specifications. This non-heat-treatable alloy offers excellent weldability, superior corrosion resistance, and good workability. With a tensile strength of 22,000 PSI, its medium thickness is ideal for structural panels, machine guards, chemical equipment, and general fabrication projects. In stock for same-day Los Angeles pickup. Learn More

Durable 1-1/4" x 1-1/4" x 16GA Galvanized Slotted Angle for versatile framing and support applications. Made from commercial-grade, corrosion-resistant galvanized steel conforming to ASTM A653 standards, it is ideal for constructing custom shelving, racks, and braces. Pre-punched slots allow for easy bolt-together assembly. Learn More

The 1 Sq Pressed Steel Cap is a durable, weldable finishing component for 1-inch square tubing. Made from low-carbon mild steel, it provides a clean, protective end for fence posts, railings, and metal furniture. Designed for easy integration in fabrication projects. Learn More

This industrial-grade construction adhesive provides a high-strength bond for a wide range of materials. Compliant with ASTM C557 standards, it is engineered for reliability in demanding construction, fabrication, and MRO applications. Learn More

This 11-inch Face Clamp is a versatile tool for woodworking, welding, and general fabrication. Its large jaw capacity and 2-inch reach provide strong, flush clamping for pocket-hole joinery, butt joints, and assembly tasks. The durable steel construction ensures rigidity and long service life for professional and DIY projects. In stock for same-day pickup in Los Angeles. Learn More

The Bobco Mini Portable Welding Machine is a versatile dual-voltage (110V/220V) unit designed for stick welding. It is compatible with AWS-certified electrodes from 1/16" to 1/8" in diameter, delivering reliable performance for light fabrication, repair, and MRO tasks. Learn More

These superior performance work gloves feature a durable nitrile coating for enhanced grip and protection. Rated to ANSI/ISEA 105 standards, they are designed for demanding industrial applications, providing both dexterity and durability for material handling and assembly. Learn More

This 3/32" 6013 all-purpose welding rod is an AWS/ASME certified electrode ideal for general fabrication. Designed for a stable arc on AC/DC, it delivers smooth beads on mild steel. A versatile choice for MRO and light structural work. Learn More

A professional-grade construction adhesive meeting ASTM C557 standards for strong, reliable bonds. This high-performance adhesive is ideal for bonding a wide range of materials in construction, fabrication, and MRO projects. Formulated for superior adhesion and durability. Learn More

This industrial-grade construction adhesive is engineered for high-strength bonding on a variety of substrates. Compliant with ASTM C557 standards, it provides a durable, reliable bond for MRO, fabrication, and construction projects. Ideal for securing panels, framing, and other materials where a permanent hold is critical. Learn More

The Eagle-1 is a complete slide gate operator kit for residential applications. Its powerful 1/2 HP continuous-duty motor handles gates up to 18 feet and 300 lbs. This easy-to-install package includes two wireless remotes and a monitored reflective photo eye for enhanced security and safety. Ideal for automating driveway gates with reliable performance. In stock Los Angeles. Learn More

1/2" NPS Schedule 40 Stainless Steel Pipe, 240" length. This 304 stainless steel pipe conforms to ASTM A312 and has a tensile strength of 73,200 PSI. It combines excellent corrosion resistance and weldability, making it a standard for fluid and gas transport. The small diameter is ideal for instrumentation lines, conduit, and small-scale process piping. In stock for Los Angeles pickup. Learn More

1/2" NPS Schedule 40 Galvanized Steel Pipe in 21-foot lengths. Conforms to ASTM A53 Grade B with a 60,000 PSI tensile strength. The hot-dip zinc coating provides superior corrosion resistance for outdoor and high-moisture environments. This small diameter is ideal for plumbing, non-potable water lines, conduit, and residential handrails. In stock for same-day Los Angeles pickup. Learn More

1-1/4" x 1/2" x 1/8" A36 Hot Rolled Steel Channel, sold in 20 ft lengths. This bar-size channel conforms to ASTM A36 specifications and offers a minimum yield strength of 36,000 PSI. Its excellent weldability and good machinability make it a versatile choice for general fabrication. Ideal for small equipment frames, structural brackets, and support braces. In stock for Los Angeles pickup. Learn More

1/2" x 1/2" A36 Hot Rolled Steel Square Bar, 240" length. Conforms to ASTM A36 with 36,000 PSI minimum yield strength and excellent weldability. Its balance of strength and cost-effectiveness makes it a foundational material for fabrication. The medium 1/2" size is ideal for equipment frames, support braces, and structural repairs. In stock for Los Angeles pickup. Learn More

26 Gauge Galvanized Steel PBR Panel, measuring 36 inches wide by 288 inches (24 feet) long. Produced to ASTM A653 standards, this panel offers excellent corrosion resistance from its protective zinc coating. The PBR (Purlin Bearing Rib) profile provides structural strength, making it ideal for roofing, siding, and agricultural building applications where durability and weather resistance are required. In stock for Los Angeles pickup. Learn More

Protect your hands with our industrial-grade Goat Leather Driving Gloves. These gloves are rated to ANSI/ISEA 105 standards, providing excellent dexterity and durability for material handling. The premium goat leather construction ensures a comfortable fit and reliable protection for MRO and fabrication tasks. Learn More

The Eagle-1000 FR is a robust 1/2 HP slide gate operator designed for residential and light commercial applications. It handles gates up to 27 feet and 600 lbs with a continuous duty motor. This complete kit includes two remotes, a receiver, and a photo eye safety monitor for a secure and convenient access control solution. In stock for same-day pickup in Los Angeles. Learn More

This 1/2" x 4-1/2" industrial masonry drill bit is engineered for high-performance drilling in concrete, brick, and block. It features a durable tungsten carbide tip and complies with ANSI B212.15 standards, ensuring precision and long service life for demanding applications. Learn More

26 Gauge Galvanized Steel PBR (Purlin Bearing Rib) panel, 36 inches wide by 192 inches (16 ft) long. Conforms to ASTM A653, offering excellent corrosion resistance from its protective zinc coating. Ideal for commercial roofing, agricultural siding, and residential projects, providing a durable, low-maintenance exterior. In stock for same-day pickup in Los Angeles. Learn More

0.25" x 48" x 120" 3003 Aluminum Diamond Plate. Conforms to ASTM B209, offering 22,000 PSI tensile strength, good workability, and excellent corrosion resistance. The raised diamond pattern provides a durable, non-slip surface. This medium thickness plate is ideal for structural panels, machine guards, vehicle body panels, and high-traffic flooring. In stock for same-day Los Angeles pickup. Learn More

3/8" x 48" x 120" Hot Rolled Diamond Plate, made from A36 structural steel and conforming to ASTM A786 standards. This heavy-duty plate offers 58,000-80,000 PSI tensile strength and a raised pattern for maximum skid resistance. Its substantial thickness makes it ideal for industrial flooring, heavy equipment ramps, trench covers, and structural walkways. In stock for same-day Los Angeles pickup. Learn More

1/2" x 48" x 120" Hot Rolled Diamond Plate, made from A36 steel. Conforms to ASTM A786 standards and features a raised pattern for maximum skid resistance. With a tensile strength of 58,000-80,000 PSI, this heavy-duty plate is ideal for industrial flooring, loading ramps, and heavy equipment base plates. In stock for same-day Los Angeles pickup. Learn More

0.188" thick 3003-H14 Aluminum Diamond Plate, measuring 48" x 120" (4x10 ft). Conforms to ASTM B209 standards with 22,000 PSI tensile strength. This medium-thickness plate provides excellent workability, good corrosion resistance, and a non-slip surface. Ideal for trailer flooring, running boards, and protective wall panels. In stock for immediate cutting and pickup in Los Angeles. Learn More

24 Gauge Galvanized Steel B-Deck measuring 36 inches wide by 120 inches long. This structural panel conforms to ASTM A653, providing excellent corrosion resistance from its protective zinc coating. With a high strength-to-weight ratio, it is an economical solution for roofing, siding, and floor decking systems. Ideal for residential, commercial, and agricultural construction. In stock for immediate Los Angeles pickup. Learn More

11/32" x 48" x 120" A36 Hot Rolled Steel Plate. Conforms to ASTM A36 with a minimum yield strength of 36,000 PSI and excellent weldability. This heavy-gauge plate provides robust structural support for demanding applications. Its large thickness is ideal for base plates, heavy equipment mounting, and wear plates where strength and durability are critical. In stock for immediate Los Angeles pickup. Learn More

This Heavy Duty Regal Cutter Set includes two robust utility cutters (2-1/2" and 3-7/8") designed for demanding tasks in any workshop or job site. Featuring durable construction and sharp, reliable blades, this set is perfect for cutting a variety of materials with precision and control. An essential tool for fabricators, shippers, and installers. In stock for Los Angeles pickup. Learn More

A 26 Gauge x 36" x 240" Galvanized PBR Panel, manufactured to ASTM A653 standards. Features a protective zinc coating applied via a hot-dip process for excellent corrosion and rust resistance. The underlying steel provides up to 80,000 PSI tensile strength. Ideal for residential roofing, commercial siding, and agricultural structures. In stock Los Angeles. Learn More

This 1/4" x 4-1/4" Cobalt Industrial Drill Bit is engineered from M35 steel with 5% cobalt for superior heat resistance. Conforming to ANSI/ASME B94.11M standards, its 135° split-point tip ensures precise starts and is ideal for drilling into stainless steel and cast iron. Learn More

This 3/16" x 4-1/4" industrial cobalt drill bit is engineered from M35 steel (5% cobalt) for superior heat resistance. Its 135° split-point tip ensures precise, no-walk starts on hard materials like stainless steel and cast iron. Manufactured to meet industrial performance standards for durability and accuracy. Learn More

Our 1/2 inch Cobalt Drill Bit is engineered from M35 steel with 5% cobalt for superior heat resistance up to 1100°F. Featuring a 135° split-point geometry compliant with ANSI standards, this bit is designed for high-performance drilling in hard materials like stainless steel and cast iron. Learn More

The 1-1/4 Inch Square Plastic Cap provides a clean, finished look for square tubing applications. Made from durable, weather-resistant black plastic, it protects against sharp edges and internal debris. This cap offers a secure press-fit for reliability in fencing, furniture, and equipment fabrication. Learn More

Product 217 is an industrial-grade construction adhesive engineered to meet ASTM C557 standards. This high-strength adhesive provides a durable, permanent bond for a wide range of fabrication, MRO, and construction applications on various materials. Learn More

Durable 1-1/2 inch square plastic cap designed for a secure fit on square tubing. Made from high-quality, weather-resistant Low-Density Polyethylene (LDPE), this cap provides a clean, finished appearance and protects against debris. Learn More

This 2 Inch Post Ball Cap provides a durable, decorative finish for square or round tubing. Fabricated from Class 25-30 gray cast iron, it is designed for welding onto fences, gates, and handrails, offering a classic architectural look. Learn More

The C-Scroll (5112A) is a classic decorative element forged from high-quality Class 25-30 gray iron. This architectural-grade component is designed to add an elegant, traditional finish to custom fences, gates, and railings in fabrication projects. Learn More

Durable 14" brown leather welding gloves engineered for high-heat protection. These industrial-grade gloves meet ANSI/ISEA 105 standards for cut and abrasion resistance, making them ideal for professional welding and fabrication. Learn More

SKU 215 is an industrial-grade construction adhesive engineered for high-strength bonding. Compliant with ASTM C557, this adhesive provides a durable, reliable bond for a wide range of materials in fabrication and MRO projects. Learn More

The Hook Lock Double Cylinder provides robust security for commercial and industrial gates. Featuring a hardened steel hook bolt and dual-keyed access, this lock is engineered for high-traffic applications and enhanced access control, designed to meet key industry standards for durability and security. Learn More

Durable 5/8 Inch Square Plastic Caps designed for a secure, press-fit on square tubing. Made from industrial-grade, weather-resistant plastic, these caps provide a clean, finished appearance while protecting against dirt, moisture, and sharp edges. Ideal for fencing, furniture, and equipment fabrication. Learn More

Our 2 Inch Square Plastic Cap is an industrial-grade finishing component made from durable, low-density polyethylene (LDPE). It provides a secure, press-fit closure for square tubing, protecting against moisture and debris while offering a clean, professional appearance. Learn More

The 1-¼” Single Lockbox with a single hole is an essential component for security gates and fences. Constructed from high-quality, weldable steel, it provides a durable housing for gate locks. Designed for easy installation and long-term performance in commercial and residential applications. Learn More