Search results for: 'may+lock+the+in'

The Hook Lock Double Cylinder provides robust security for commercial and industrial gates. Featuring a hardened steel hook bolt and dual-keyed access, this lock is engineered for high-traffic applications and enhanced access control, designed to meet key industry standards for durability and security. Learn More

Our industrial Fire Door Lock is engineered for critical safety applications in commercial and institutional buildings. This lock is certified to UL 10C standards for fire resistance and constructed from high-strength steel for maximum durability and security. It is designed for reliable performance on fire-rated door assemblies. Learn More

The 1-1/2 Double Lock Box is an industrial-grade hardware component for fabricating secure gate and fence locking systems. Made from weldable steel, it provides a durable housing for standard lock mechanisms, making it ideal for ornamental and security applications. Learn More

1-1/2" Single Lock Box constructed from durable, weldable steel. Designed for securing slide or swing gates, this hardware fits 1-1/2" square or round tubing. The weld-on design ensures a permanent, secure installation for standard gate locks. Ideal for residential, commercial, and industrial fence applications. In stock for immediate pickup in Los Angeles. Learn More

Our 1-1/4 Double Lock Box is a durable gate hardware component crafted from high-strength Class 25-30 gray cast iron. Designed for 1-1/4" square tubing, it provides a secure housing for lock mechanisms in ornamental fences and security gates. Ideal for industrial fabrication and commercial applications. Learn More

A 1-1/4" Single Lock Box designed for welding onto square tube frames for gates and doors. Fabricated from durable, weldable mild steel, this hardware provides a secure housing for standard deadbolts and latches. Its raw steel finish is ready for prepping and painting. Ideal for fence contractors and ornamental iron fabricators. In stock Los Angeles. Learn More

The 1-¼” Single Lockbox with a single hole is an essential component for security gates and fences. Constructed from high-quality, weldable steel, it provides a durable housing for gate locks. Designed for easy installation and long-term performance in commercial and residential applications. Learn More

This 1-¼” Single Hole Lockbox is fabricated from high-quality, weldable steel. Designed for security gate and fence applications, it provides a durable housing for standard lock mechanisms. Its single-hole configuration ensures straightforward installation and compatibility. Learn More

This large industrial slide bolt features a robust 3/4" diameter steel shaft and durable black finish. Engineered for reliable security on heavy-duty gates, doors, and enclosures. Ideal for fabrication and MRO applications. Learn More

The Eagle 1000 FSC is a 1/2 HP continuous duty sliding gate operator for residential and light commercial applications. It handles rolling gates up to 27 feet and 600 lbs with a 12" per second travel speed. Features include 2-wire master/slave, auto-close timer, and a fail-safe manual crank release. In stock for Los Angeles pickup. Learn More

This Small Slide Bolt features a durable 1/2" diameter steel shaft for reliable latching. Manufactured from industrial-grade low-carbon steel similar to ASTM A307 material, it provides a simple and effective security solution for light-duty doors and gates. Its robust construction ensures long-lasting performance in MRO and fabrication applications. Learn More

This 11-inch Face Clamp is a versatile tool for woodworking, welding, and general fabrication. Its large jaw capacity and 2-inch reach provide strong, flush clamping for pocket-hole joinery, butt joints, and assembly tasks. The durable steel construction ensures rigidity and long service life for professional and DIY projects. In stock for same-day pickup in Los Angeles. Learn More

The C46 is an industrial-grade caster engineered for demanding material handling and fabrication applications. It features a robust steel frame and is available with certified load ratings from 200 to 2000 lbs, providing a durable mobility solution for heavy equipment. Learn More

The Eagle-1 is a complete slide gate operator kit for residential applications. Its powerful 1/2 HP continuous-duty motor handles gates up to 18 feet and 300 lbs. This easy-to-install package includes two wireless remotes and a monitored reflective photo eye for enhanced security and safety. Ideal for automating driveway gates with reliable performance. In stock Los Angeles. Learn More

This 5/16" x 4" One Way Screw is crafted from industrial-grade steel for reliable, tamper-resistant fastening. Its unique head design, conforming to general industrial standards, allows for installation with a standard screwdriver but prevents removal. Ideal for security applications where permanent or semi-permanent assembly is required. Learn More

26 Gauge Galvanized Corrugated Steel Sheet, 36" wide by 96" long. The G90 zinc coating, applied per ASTM A653, delivers excellent corrosion resistance for outdoor use. Its corrugated profile adds rigidity to the lightweight panel, making it ideal for roofing, siding, fencing, and agricultural barriers where durable weather protection is required. In stock for immediate pickup in Los Angeles. Learn More

This 4-inch V-Groove Wheel is machined from solid steel for maximum durability and load capacity. The V-groove is engineered for smooth operation on inverted angle iron track, making it the ideal choice for heavy sliding gates, industrial doors, and material handling carts. Its robust construction ensures reliable performance in demanding applications. In stock for same-day pickup in Los Angeles. Learn More

A36 Hot Rolled Steel Flat Bar measuring 1-1/2" wide by 3/4" thick in 20-foot lengths. This structural steel conforms to ASTM A36, offering 58,000 PSI tensile strength and excellent weldability. The medium size is ideal for structural bracing, machine ways, equipment frames, and general fabrication projects. Its rough, scaled surface is suitable where strength is the primary concern. In stock Los Angeles. Learn More

The Morse Metal Devil NXT circular saw blade (7-1/4" dia., 5/8" arbor, 48 teeth) is engineered for fast, smooth cuts in metal. Its carbide-tipped teeth provide exceptional durability when cutting steel, aluminum, and stainless steel. Rated for up to 5800 RPM, this blade delivers burr-free finishes, reducing the need for secondary grinding. Ideal for fabricators and contractors. In stock Los Angeles. Learn More

11 Gauge (0.120") x 48" x 120" A36 Hot Rolled Steel Sheet. ASTM A36 certified, with a minimum yield strength of 36,000 PSI and excellent weldability. The medium thickness is ideal for structural panels, machine guards, trailer frames, and general fabrication. The hot rolled mill finish is suitable for applications where finish is secondary to strength. In stock for same-day Los Angeles pickup. Learn More

6061-T6 Aluminum Flat Bar, 1-1/2" wide by 1/8" thick, in 144" lengths. This versatile, heat-treatable grade conforms to ASTM B211 and offers 45,000 PSI tensile strength, good machinability, and excellent weldability. The medium width is ideal for structural bracing, support brackets, machine ways, and general fabrication projects. In stock for same-day pickup in Los Angeles. Learn More

Our 7-inch barrel hinges are engineered from heavy-duty, weldable carbon steel for maximum durability and strength. Designed for high-load applications, these hinges provide a smooth, reliable pivot for industrial gates and security doors. The robust construction ensures long-lasting performance in demanding MRO and fabrication environments. Learn More

1/2" x 1" 304 Stainless Steel Flat Bar in 144" lengths. Conforming to ASTM A276, this versatile bar offers 73,200 PSI tensile strength, excellent corrosion resistance, and superior weldability. Its rectangular profile is ideal for structural bracing, equipment frames, and architectural trim. The medium size provides a good balance of strength and workability for fabricators and machinists. In stock for Los Angeles pickup. Learn More

3" x 3" x 1/4" 304 Stainless Steel Angle, 240" length. Conforms to ASTM A276, offering 73,200 PSI tensile strength, excellent corrosion resistance, and superior weldability. This medium-sized angle is ideal for structural framing, equipment bases, shelving, and architectural trim. The durable, non-magnetic properties make it suitable for food processing and construction applications. In stock for immediate Los Angeles pickup. Learn More

The 14 x 2” Hex Washer Self-Drill Screw is a high-performance fastener engineered to SAE J78 standards. It features a hardened steel point for drilling into metal without a pilot hole and a bonded neoprene washer for a weather-tight seal. The zinc plating, compliant with ASTM B633, provides excellent corrosion resistance for exterior applications. Learn More

1-1/2" diameter 6061-T6 Aluminum Round Bar in a 144" length. This versatile alloy conforms to ASTM B211 and provides 45,000 PSI tensile strength, good machinability, and excellent corrosion resistance. The medium diameter is ideal for general-purpose structural components, shafts, axles, and custom machined parts. In stock and available for same-day pickup in Los Angeles. Learn More

1/4" diameter 304 Stainless Steel Round Bar, 144" length. This versatile austenitic stainless steel conforms to ASTM A276 and provides 73,200 PSI tensile strength with excellent corrosion resistance and weldability. The small diameter is ideal for manufacturing precision pins, dowels, small shafts, and fastener blanks. In stock for immediate pickup in Los Angeles. Learn More

This 5/16” x 3” Hex Lag Screw is a heavy-duty fastener manufactured from low carbon steel to meet ASTM A307 specifications. The zinc plating provides essential corrosion resistance, making it ideal for structural wood-to-wood and wood-to-masonry applications. Learn More

The 1 Sq Pressed Steel Cap is a durable, weldable finishing component for 1-inch square tubing. Made from low-carbon mild steel, it provides a clean, protective end for fence posts, railings, and metal furniture. Designed for easy integration in fabrication projects. Learn More

3/16" diameter 1018 Cold Rolled Round Bar, sold in 144" lengths. Conforms to ASTM A108 with 63,800 PSI tensile strength and excellent machinability. The cold drawing process provides tight dimensional tolerances and a smooth, clean finish. This small-diameter rod is ideal for manufacturing pins, dowels, small shafts, and fastener blanks. In stock for Los Angeles pickup. Learn More

1-1/2" OD x 0.065" wall 304 Stainless Steel Round Tube, supplied in 20-foot lengths. Conforms to ASTM A269, featuring a 73,200 PSI tensile strength, excellent weldability, and corrosion resistance. The 180 grit polished finish provides a clean, decorative appearance ideal for architectural handrails, equipment frames, and structural supports. In stock for immediate Los Angeles pickup. Learn More

6" x 6" x 1/2" A36 Hot Rolled Steel Angle, supplied in a 20-foot (240") length. Conforming to ASTM A36, this structural angle offers a minimum yield strength of 36,000 PSI and excellent weldability. The large profile is ideal for heavy structural applications, building frames, industrial supports, and heavy equipment manufacturing. In stock for immediate cutting and pickup in Los Angeles. Learn More

The ½” x 3” Power Bull Anchor is a heavy-duty, high-strength steel fastener designed for secure anchoring in concrete and masonry. This industrial-grade anchor includes a nut and washer and features a zinc-plated finish per ASTM B633 for enhanced corrosion resistance. Learn More

1018 Cold Rolled Steel Flat Bar, measuring 1" wide by 3/4" thick in a 144" length. Conforms to ASTM A108 and offers 63,800 PSI tensile strength. The cold drawn process provides tight dimensional tolerances and a clean, smooth surface ideal for machining and welding. Excellent for fabricating brackets, base plates, and machine components. In stock Los Angeles. Learn More

1/8" diameter 304 Stainless Steel Round Bar, 144" length. Conforms to ASTM A276, this versatile austenitic grade offers excellent corrosion resistance and weldability. Its 73,200 PSI tensile strength makes it suitable for a wide range of applications. The small diameter is ideal for pins, fastener blanks, and precision components in food processing and architectural projects. In stock for Los Angeles pickup. Learn More

5/8 inch 1018 Cold Rolled Hexagon Bar, 144" length. Conforms to ASTM A108 with 63,800 PSI tensile strength. The cold drawing process provides a smooth surface, tight dimensional accuracy, and excellent machinability. This medium-sized bar is ideal for manufacturing nuts, standoffs, hydraulic fittings, and machinery shafts. In stock for Los Angeles pickup. Learn More

3/4" x 3/4" 304 Stainless Steel Square Bar, 144" length. Conforms to ASTM A276 specifications. This austenitic grade combines 73,200 PSI tensile strength with excellent corrosion resistance and weldability. The medium 3/4" profile is ideal for structural supports, frames, shafts, and braces in food processing and architectural applications. In stock for Los Angeles pickup. Learn More

1-inch diameter Cold Rolled All Thread Rod in a 120-inch length with a zinc plated finish. This rod meets ASTM A307 Grade A strength requirements, with a base material tensile strength of 63,800 PSI. The zinc plating provides good corrosion resistance for general-purpose fastening, anchoring systems, and suspending HVAC fixtures. In stock for immediate Los Angeles pickup. Learn More

Size 10, 16-inch heavy-duty rubber rain boots. Designed for maximum protection in wet and muddy environments, these boots feature 100% waterproof construction and a rugged, slip-resistant outsole for secure footing on slippery surfaces. The durable yet flexible rubber material ensures all-day comfort for construction, landscaping, and general industrial use. In stock for immediate pickup at our Los Angeles location. Learn More

304 Stainless Steel Flat Bar, 3/16" thick by 1/2" wide in 144" lengths. This versatile bar conforms to ASTM A276 and offers a tensile strength of 73,200 PSI. Its excellent corrosion resistance and weldability make it a standard for fabrication. The small profile is ideal for creating support brackets, trim, straps, and decorative elements. In stock for Los Angeles pickup. Learn More

1/2" NPS Schedule 40 Galvanized Steel Pipe in 21-foot lengths. Conforms to ASTM A53 Grade B with a 60,000 PSI tensile strength. The hot-dip zinc coating provides superior corrosion resistance for outdoor and high-moisture environments. This small diameter is ideal for plumbing, non-potable water lines, conduit, and residential handrails. In stock for same-day Los Angeles pickup. Learn More

16 Gauge (0.060") thick Galvanized Steel Sheet, 48" x 120". Conforms to ASTM A653 standards, featuring a protective zinc coating for excellent corrosion resistance in outdoor or high-moisture environments. This versatile thickness is ideal for HVAC ductwork, electrical enclosures, flashing, and light-duty fabrication. Combines the strength of steel with superior rust protection. In stock for Los Angeles pickup. Learn More

1" diameter Cold Rolled All Thread Rod in 120" (10 ft) lengths. Made from 1018 steel with an oil finish for rust prevention, this rod meets ASTM A307 Grade A strength requirements with a 60,000 PSI tensile strength. The continuous threading provides versatile fastening for construction, manufacturing, and general repair. Easily cut to custom lengths. In stock for Los Angeles pickup. Learn More

3/4 inch 1018 Cold Rolled Steel Square Bar, sold in 144" lengths. This general-purpose low-carbon steel conforms to ASTM A108, offering excellent machinability and a clean, smooth surface finish. The cold drawing process increases strength to 63,800 PSI and provides tight dimensional tolerances, making it ideal for shafts, fixtures, and precision machined parts. In stock Los Angeles. Learn More

A 3-inch diameter heavy-duty hitch ball constructed from solid, hot-forged steel for maximum strength and durability. The corrosion-resistant chrome-plated finish ensures reliable performance in demanding weather conditions. This large ball size is engineered for gooseneck couplers and heavy industrial trailers, providing a secure connection for your most substantial loads. In stock for immediate Los Angeles pickup. Learn More

2-1/2" x 1/8" 304 Stainless Steel Flat Bar, 144" length. Conforms to ASTM A276, offering 73,200 PSI tensile strength, excellent corrosion resistance, and superior weldability. This versatile austenitic grade is non-magnetic in its annealed state. The medium-width profile is ideal for structural bracing, equipment framework, base plates, and general fabrication. In stock for Los Angeles pickup. Learn More

A 4" x 1/2" 1018 Cold Rolled Steel Flat Bar, supplied in 144" lengths. Conforming to ASTM A108, this bar features a 63,800 PSI tensile strength, tight dimensional tolerances, and excellent machinability. The smooth, scale-free surface is ready for fabrication. Its substantial width makes it ideal for base plates, heavy structural bracing, and die components. In stock for Los Angeles pickup. Learn More

1/2" diameter Cold Rolled All Thread Rod, supplied in 120-inch lengths with a zinc plated finish for corrosion resistance. Conforming to the strength requirements of ASTM A307, this rod offers a tensile strength of 63,800 PSI. Its continuous threading provides maximum versatility for custom-length fasteners, anchoring systems, and structural bracing. In stock for same-day Los Angeles pickup. Learn More

4" x 2" x 0.120" Hot Rolled Steel Rectangular Tube, conforming to ASTM A500 Grade B. This structural tubing offers a high strength-to-weight ratio with 58,000 PSI tensile strength and excellent weldability. The large profile is ideal for heavy-duty applications like building frames, trailer beds, support columns, and industrial machinery bases. In stock for same-day pickup in Los Angeles. Learn More

1/2" x 3/8" A36 Hot Rolled Steel Flat Bar, sold in 240" lengths. This structural steel conforms to ASTM A36, offering a minimum yield strength of 36,000 PSI and excellent weldability. The hot-rolled process results in a scaly mill finish. Its small dimensions make it ideal for fabricating support brackets, straps, shims, and general frame stock. In stock for Los Angeles pickup. Learn More

1" x 1/2" 1018 Cold Rolled Steel Flat Bar in 144" lengths. This bar conforms to ASTM A108 and features a tensile strength of 63,800 PSI. The cold drawing process provides tight dimensional tolerances and a clean, scale-free surface, making it ideal for precision machining. A versatile choice for structural bracing, base plates, and custom machinery components. In stock Los Angeles. Learn More

6063 Aluminum Channel with 1/2" height, 1/2" width, and 1/8" wall thickness. Conforms to ASTM B308, offering 27,000 PSI tensile strength, excellent corrosion resistance, and a superior surface finish. Known as the "architectural alloy," this small profile is ideal for decorative trim, window frames, signage, and custom enclosures. In stock Los Angeles. Learn More

5/8" x 16 gauge A500B Galvanized Steel Square Tube, 24 ft length. Conforms to ASTM A500 with 58,000 PSI tensile strength. The hot-dip zinc coating provides excellent corrosion resistance for outdoor applications. This small profile is ideal for light structural frames, gates, railings, and agricultural uses. In stock for Los Angeles pickup. Learn More

Size 9-1/2 industrial rubber boots with a 16" height for maximum coverage. Built for demanding job site conditions, these waterproof boots offer reliable protection against water, mud, and debris. The durable rubber construction and treaded, slip-resistant sole provide safety and comfort for fabricators, construction workers, and maintenance personnel. In stock for Los Angeles pickup. Learn More

2" Nominal Pipe Size (NPS) Galvanized Steel Pipe, Schedule 40 wall, 21-foot length. Conforms to ASTM A53 Grade B with 60,000 PSI tensile strength. The hot-dip zinc coating provides excellent corrosion resistance for outdoor and high-moisture use. Ideal for plumbing mains, HVAC piping, handrails, and structural posts. In stock for same-day Los Angeles pickup. Learn More

1-3/8" diameter 304 Stainless Steel Round Bar, 144" length. Conforms to ASTM A276, this versatile austenitic grade provides 73,200 PSI tensile strength and excellent corrosion resistance. Its weldability and formability make it a standard for general-purpose applications. The medium diameter is ideal for shafts, axles, spacers, and architectural components. In stock for Los Angeles pickup. Learn More

9/16" 1018 Cold Rolled Hexagon Bar, 144" length. Conforms to ASTM A108 specifications with 63,800 PSI tensile strength and excellent machinability. The cold drawn process provides a smooth finish and tight dimensional tolerances. This medium-sized hex bar is ideal for manufacturing fasteners, shafts, hydraulic fittings, and other machined components. In stock for immediate Los Angeles pickup. Learn More

5" x 1/4" 304 Stainless Steel Flat Bar, 144" length. Conforms to ASTM A276 with 73,200 PSI tensile strength, excellent weldability, and superior corrosion resistance. This versatile austenitic stainless grade is non-magnetic in the annealed condition. Its large profile is ideal for heavy structural supports, base plates, gussets, and food processing equipment framework. In stock for Los Angeles pickup. Learn More

This 4" x 1/2" Hot Rolled Steel Flat Bar is a general-purpose structural A36 grade steel, conforming to ASTM A36. It offers a minimum yield strength of 36,000 PSI and excellent weldability. The large width makes it ideal for heavy structural applications, base plates, support braces, and industrial equipment fabrication. In stock for immediate cutting and pickup in Los Angeles. Learn More

3/4" diameter Cold Rolled All Thread Rod in 10-foot lengths with a standard oil finish. Made from low-carbon steel, this rod offers good strength (approx. 63,800 PSI tensile) and conforms to ASTM A307 Grade A strength requirements. The continuous threading provides versatile performance for anchoring, fastening, bracing, and suspending systems in construction and manufacturing. In stock for same-day Los Angeles pickup. Learn More

0.080" thick 6061-T6 Aluminum Sheet, 48" x 144". This versatile sheet conforms to ASTM B209, offering 45,000 PSI tensile strength, good machinability, and excellent corrosion resistance. The T6 temper provides optimal strength for structural applications. This medium-thickness sheet is ideal for structural panels, machine guards, base plates, and vehicle body panels. In stock and ready for same-day cutting and pickup in Los Angeles. Learn More

These 7" J-Bolt Adjustable Barrel Hinges are engineered from high-strength steel for maximum durability in heavy-duty applications. Designed for weld-on installation, they provide a smooth, reliable pivot for industrial gates and doors. The adjustable J-bolt allows for precise alignment and tensioning. Learn More

2-1/2" nominal Schedule 40 Galvanized Steel Pipe, 21-foot length. Conforms to ASTM A53 Grade B, with 60,000 PSI tensile strength for structural integrity. The hot-dip zinc coating provides excellent corrosion and rust resistance. Large diameter is ideal for main water lines, industrial piping, and structural columns. In stock for immediate Los Angeles pickup. Learn More

1-1/4" diameter 1018 Cold Rolled Round Bar, 144" length. Conforming to ASTM A108, this general-purpose steel has 63,800 PSI tensile strength and excellent machinability. The cold drawn process provides a smooth, scale-free finish and tight dimensional tolerances, making it ideal for shafts, axles, and precision machined components. In stock for Los Angeles pickup. Learn More

1/8" diameter 1018 Cold Rolled Steel Round Bar, 144" length. Conforms to ASTM A108 with a tensile strength of 63,800 PSI. The cold drawn process provides a smooth, scale-free finish and tight dimensional tolerances. This small diameter is ideal for manufacturing precision pins, dowels, fastener blanks, and small shafts. In stock for Los Angeles pickup. Learn More

1/8" x 3/4" 1018 Cold Rolled Flat Bar, 144" length. Conforms to ASTM A108 with a tensile strength of 63,800 PSI. This grade offers excellent machinability and a smooth, scale-free surface due to the cold drawing process. Ideal for manufacturing small brackets, mounting straps, shims, and precision frame components. In stock for Los Angeles pickup. Learn More

1/2" x 0.065" wall 304 Stainless Steel Square Tube, sold in 20-foot (240") lengths. Conforms to ASTM A269 with a 73,200 PSI tensile strength. This grade offers an excellent balance of corrosion resistance and weldability. The 180 grit satin finish provides a clean, decorative appearance ideal for architectural railings, frames, and trim. In stock for immediate Los Angeles pickup. Learn More

3/4" x 1/8" 304 Stainless Steel Flat Bar, sold in 144" lengths. This versatile bar meets ASTM A276 specifications and provides excellent corrosion resistance and weldability. Its 73,200 PSI tensile strength makes it a reliable choice for general fabrication. The small profile is ideal for creating custom brackets, support straps, and decorative trim. In stock for same-day Los Angeles pickup. Learn More

2" x 1/8" A36 Hot Rolled Steel Flat Bar, available in 20-foot lengths. This structural steel bar conforms to ASTM A36, providing a minimum yield strength of 36,000 PSI and excellent weldability. Its medium size is versatile for structural bracing, equipment frames, base plates, and general fabrication projects. The hot-rolled finish has a characteristic scale. In stock for same-day Los Angeles pickup. Learn More

1" x 1" x 1/8" Hot Rolled A36 Steel Angle available in 240" (20 ft) lengths. Conforming to ASTM A36, this angle offers a minimum yield strength of 36,000 PSI and excellent weldability. The hot-rolled process results in a durable, scaled finish. Its small profile is ideal for light structural framing, equipment guards, brackets, and general fabrication projects. In stock for same-day Los Angeles pickup. Learn More

A36 Hot Rolled Steel Angle with 5" and 3" legs, a 3/8" thickness, and 240" length. This unequal leg angle conforms to ASTM A36, providing a minimum 36,000 PSI yield strength and excellent weldability. The large profile is ideal for heavy-duty structural applications, including building frames, equipment bases, and industrial supports. In stock and ready for same-day pickup in Los Angeles. Learn More

1/8" diameter 303 Stainless Steel Round Bar in 144" lengths. Certified to ASTM A582, this free-machining grade offers 90,000 PSI tensile strength and excellent machinability for high-speed production. The sulfur content ensures superior chip breaking and a fine surface finish. This small diameter is ideal for pins, dowels, fastener blanks, and precision screw machine parts. In stock for Los Angeles pickup. Learn More

1/2" x 3" 6061-T6 Aluminum Flat Bar, sold in 144" lengths. Conforms to ASTM B211. This versatile alloy provides 45,000 PSI tensile strength, good machinability, and excellent corrosion resistance. The T6 temper indicates it has been heat-treated for maximum strength. Its medium width is ideal for structural bracing, machine ways, base plates, and custom fabricated parts. In stock for immediate Los Angeles pickup. Learn More

1-1/4" x 1-1/4" Galvanized Square Tube with a 16 gauge wall, sold in 24-foot lengths. Manufactured to ASTM A500 Grade B standards, this structural tubing has a 58,000 PSI tensile strength. The hot-dip galvanized zinc coating provides excellent corrosion resistance for outdoor applications. Ideal for structural frames, gates, trailer construction, and railings. In stock for Los Angeles pickup. Learn More

1-1/4" x 3/8" A36 Hot Rolled Steel Flat Bar, sold in 20-foot (240") lengths. Conforms to ASTM A36 specifications, providing a minimum yield strength of 36,000 PSI and excellent weldability. This versatile structural steel is ideal for general fabrication, support bracing, industrial maintenance, and trailer frames. The hot rolled finish has a distinctive mill scale. In stock for same-day Los Angeles pickup. Learn More

3/4" OD x 0.065" wall 304 Stainless Steel Round Tube with a 180 grit polished finish. Conforms to ASTM A269 and offers 73,200 PSI tensile strength. This grade combines excellent corrosion resistance and weldability, making it ideal for architectural and decorative applications like handrails, guardrails, and trim. The polished surface provides a clean, aesthetic appearance. In stock for immediate Los Angeles pickup. Learn More

1-1/4" x 3/8" 1018 Cold Rolled Flat Bar, sold in 144" lengths, conforms to ASTM A108. It features a tensile strength of 63,800 PSI, excellent machinability, and good weldability. The cold-drawn process provides a smooth, scale-free surface and tight dimensional tolerances. This medium-width bar is ideal for structural bracing, machine ways, and general fabrication projects. In stock for Los Angeles pickup. Learn More

4" x 5/8" A36 Hot Rolled Steel Flat Bar. Conforms to ASTM A36 with 36,000 PSI minimum yield strength. Features excellent weldability and good machinability. The hot-rolled process results in a scaly finish and slightly rounded edges. This large width is ideal for structural base plates, heavy equipment supports, trailer frames, and general fabrication projects. In stock for immediate Los Angeles pickup. Learn More

6" x 3/16" A36 Hot Rolled Steel Flat Bar, supplied in a 240" (20 ft) length. This structural steel conforms to ASTM A36 standards and features a minimum yield strength of 36,000 PSI and excellent weldability. The large width makes it ideal for heavy-duty applications like base plates, structural supports, trailer frames, and general fabrication. In stock for same-day Los Angeles pickup. Learn More

1" x 1/8" 1018 Cold Rolled Steel Flat Bar, 144" length. Conforms to ASTM A108, offering 63,800 PSI tensile strength and excellent machinability (70%). The cold drawn process provides a smooth, scale-free finish and tight dimensional tolerances. This medium-width bar is ideal for structural bracing, machine ways, and wear strips where precision is key. In stock for Los Angeles pickup. Learn More

A 4" wide by 1/8" thick 1018 Cold Rolled Steel Flat Bar, supplied in a 144" length. This bar meets ASTM A108 standards and features 63,800 PSI tensile strength, tight dimensional tolerances, and good weldability. The cold drawn finish provides a smooth, scale-free surface ideal for machining. Its large width makes it suitable for base plates, structural supports, and die components. In stock Los Angeles. Learn More

1-1/4" x 1/4" Hot Rolled Steel Flat Bar, ASTM A36. This general-purpose structural steel offers a minimum yield strength of 36,000 PSI and excellent weldability. The hot rolling process gives it a scaly finish and makes it cost-effective for fabrication. This medium-width bar is ideal for structural bracing, machine ways, support brackets, and general repairs. In stock and available for pickup in Los Angeles. Learn More

6-inch Nominal Pipe Size (NPS) Schedule 40 Galvanized Pipe, 252-inch length. Conforms to ASTM A53 Grade B, delivering 60,000 PSI tensile strength and excellent weldability. The hot-dip zinc coating provides superior corrosion resistance for outdoor and high-moisture environments. Large diameter is ideal for main water lines, industrial process piping, and heavy structural columns. In stock Los Angeles. Learn More

A 3" x 1/2" Hot Rolled Steel Flat Bar conforming to ASTM A36. This general-purpose structural steel features 58,000 PSI tensile strength and excellent weldability. The hot-rolled process results in a scaly, mill finish suitable for applications where strength is prioritized over precise dimensions. Its medium width is ideal for structural bracing, support brackets, and general fabrication projects. In stock for immediate Los Angeles pickup. Learn More

6" x 1/2" 1018 Cold Rolled Steel Flat Bar, 144" length. Conforms to ASTM A108 with 63,800 PSI tensile strength and excellent machinability. The cold drawing process provides tight dimensional tolerances and a smooth, scale-free finish. Its substantial 6-inch width makes it ideal for base plates, heavy structural components, and die sets. In stock for Los Angeles pickup. Learn More

4 inch x 1/4 inch 6061-T6 Aluminum Flat Bar, 144-inch length. Conforming to ASTM B211, this versatile alloy combines 45,000 PSI tensile strength with good machinability and excellent corrosion resistance. The T6 temper provides optimal strength for structural applications. This large width is ideal for base plates, heavy structural components, and die components. In stock for immediate Los Angeles pickup. Learn More

3/4" x 3/8" 1018 Cold Rolled Flat Bar, 144" length. Conforms to ASTM A108 with 63,800 PSI tensile strength. The cold drawing process provides a smooth, scale-free finish and tight dimensional tolerances, making it excellent for machining and welding. This small size is ideal for making brackets, straps, shims, and small frame stock. In stock for Los Angeles pickup. Learn More

1-7/8" diameter 1018 Cold Rolled Round Bar, 144" length. Conforms to ASTM A108 with 53,700 PSI yield strength and excellent machinability. The cold drawn process provides a smooth finish and tight dimensional tolerances. This medium-diameter bar is ideal for manufacturing shafts, axles, pins, and various machined components requiring strength and precision. In stock for Los Angeles pickup. Learn More

3/16" x 1/2" 1018 Cold Rolled Steel Flat Bar, 144" length. Conforms to ASTM A108 with 63,800 PSI tensile strength and excellent machinability. The smooth, scale-free surface and tight dimensional tolerances make it ideal for fabrication of small parts like brackets, straps, and shims that require a clean finish and precision. In stock for Los Angeles pickup. Learn More

1" x 1/2" A36 Hot Rolled Steel Flat Bar, 240" length. ASTM A36 certified with a minimum yield strength of 36,000 PSI and excellent weldability. The hot rolling process gives it a scaly mill finish. This medium-sized bar is ideal for structural bracing, machine ways, support brackets, and general fabrication projects. In stock for immediate Los Angeles pickup. Learn More

1/4" x 1/2" Cold Rolled 1018 Steel Flat Bar, 144" length. Conforms to ASTM A108 standards, offering 63,800 PSI tensile strength, tight dimensional tolerances, and excellent machinability. The smooth, scale-free cold drawn finish is ideal for precision parts. This small size is perfect for manufacturing brackets, shims, and straps. In stock for same-day Los Angeles pickup. Learn More

This 3/8 inch diameter Cold Rolled All Thread Rod is supplied in a 10 foot length with a zinc-plated finish for moderate corrosion resistance. Made from low-carbon steel, it meets the strength requirements of ASTM A307 Grade A, providing a typical tensile strength of 63,800 PSI. Its continuous threading makes it ideal for versatile fastening, anchoring, bracing, and support applications. In stock for Los Angeles pickup. Learn More

#4 (1/2") Grade 60 Hot Rolled Rebar, 20-foot length. Conforms to ASTM A615 with a minimum yield strength of 60,000 PSI. The deformed surface provides a superior mechanical bond with concrete, making it essential for reinforcing foundations, slabs, and columns. This medium-diameter bar offers a standard balance of strength and ductility for structural applications. In stock for Los Angeles pickup. Learn More

This 3/4" x 3/4" x 1/8" hot rolled steel angle is a versatile structural shape conforming to ASTM A36 specifications. It offers a minimum yield strength of 36,000 PSI and excellent weldability, making it easy to fabricate. The small profile is ideal for light structural framing, equipment guards, mounting brackets, and custom fabrication projects. In stock for Los Angeles pickup. Learn More

5/16" Cold Rolled 1018 Hexagon Bar, 144" length. Meets ASTM A108 specifications. This low-carbon steel bar offers 63,800 PSI tensile strength, a smooth surface finish, and tight dimensional tolerances from the cold drawing process. Its excellent machinability and good weldability make it suitable for producing fasteners, shafts, hydraulic fittings, and other precision machined components. In stock for same-day Los Angeles pickup. Learn More

A36 Hot Rolled Steel Angle measuring 1-3/4" x 1-3/4" with a 3/16" thickness. This structural angle conforms to ASTM A36 standards and offers a minimum yield strength of 36,000 PSI and excellent weldability. The hot-rolled process results in a scaled finish. Its medium size is ideal for structural framing, equipment bases, bracing, and general fabrication projects requiring robust, easy-to-weld steel. In stock in Los Angeles. Learn More

This 3-piece Aviation Snip Set includes essential tools for any metal fabricator's toolkit. The set contains a left-cut (red handle), right-cut (green handle), and straight-cut (yellow handle) snip. Featuring hardened steel blades and a compound leverage design, these snips provide maximum cutting power with minimal effort. Ideal for cutting sheet metal in fabrication, HVAC, and roofing projects. In stock Los Angeles. Learn More

1/8" x 1/4" 1018 Cold Rolled Steel Flat Bar, 144" length. Conforms to ASTM A108 with 63,800 PSI tensile strength, good weldability, and a 70% machinability rating. The cold drawn process provides a smooth, scale-free finish and tight dimensional tolerances. Its small profile is ideal for brackets, shims, straps, and small frame stock. In stock for Los Angeles pickup. Learn More

3/4" x 1/2" x 1/8" 6063-T5 Aluminum Channel, 144" length. Conforms to ASTM B308 and features 27,000 PSI tensile strength, excellent corrosion resistance, and a superior surface finish. Known as the architectural alloy, it's ideal for window frames and decorative trim. This small profile is perfect for intricate finish work and light framing. In stock for Los Angeles pickup. Learn More

A 10-foot length of No. 40 roller chain with a corrosion-resistant nickel-plated finish. This ANSI B29.1 standard chain offers a 3,700 lbf average tensile strength, making it ideal for gate operators, including the Eagle-2000 series, and other light-duty power transmission applications. This durable chain is pre-packaged for immediate project needs. In stock for Los Angeles pickup. Learn More