Search results for: 'plate cycle blade render q 1 2.2 inch metal'

1/4" diameter 6061-T6 Aluminum Round Bar in 144" lengths. This versatile, heat-treated alloy conforms to ASTM B211 and offers 45,000 PSI tensile strength, excellent machinability, and superior corrosion resistance. Its small diameter is perfectly suited for manufacturing pins, dowels, small shafts, and precision turned components. Ready for same-day cutting and pickup in Los Angeles. Learn More

26 Gauge Galvanized Corrugated Steel Sheet, measuring 36 inches in width by 144 inches in length. Produced via a continuous hot-dip process to ASTM A653 specifications with a G90 zinc coating for excellent rust prevention. This lightweight and formable sheet is ideal for roofing, siding, and agricultural buildings. In stock and available for same-day pickup in Los Angeles. Learn More

2-1/2" x 2-1/2" x 0.180" wall Hot Rolled Steel Square Tube, 240" length. Conforms to ASTM A500 Grade B, providing 46,000 PSI yield strength and excellent weldability. This medium-sized structural tubing is a cost-effective solution for manufacturing equipment frames, trailer components, and general fabrication projects requiring a high strength-to-weight ratio. In stock for Los Angeles pickup. Learn More

5-inch Nominal Pipe Size (NPS) 304 Stainless Steel Pipe, Schedule 10 wall, in 240-inch lengths. Conforming to ASTM A312, this pipe provides excellent corrosion resistance and weldability. With a tensile strength of 73,200 PSI, it is ideal for large-scale fluid transport, industrial process lines, and structural applications requiring strength and longevity. In stock for Los Angeles pickup. Learn More

2-1/2" x 2-1/2" A500 Grade B Hot Rolled Steel Square Tube with a 0.065" wall, sold in 20-foot lengths. Conforms to ASTM A500 standards, featuring a minimum yield strength of 46,000 PSI and excellent weldability. This medium-sized structural tubing is a cost-effective solution for manufacturing trailer frames, equipment bases, roll cages, and general fabrication projects. In stock for immediate Los Angeles pickup. Learn More

3-1/2" x 3-1/2" Hot Rolled Steel Square Tube with a 0.120" wall, supplied in a 240" length. Conforming to ASTM A500 Grade B, this structural tubing features 58,000 PSI tensile strength, excellent weldability, and a high strength-to-weight ratio. Ideal for heavy structural frames, industrial supports, and equipment bases where durability and load-bearing capacity are critical. In stock for Los Angeles pickup. Learn More

1/4" diameter 1018 Cold Rolled Round Bar, 144" length. Conforms to ASTM A108 with 63,800 PSI tensile strength and excellent machinability. This cold drawn bar has tight tolerances and a smooth finish, ideal for small shafts, pins, dowels, and fastener blanks. In stock for Los Angeles pickup. Learn More

1/2" diameter 304 Stainless Steel Round Bar in 144" lengths. This versatile, general-purpose stainless conforms to ASTM A276 specifications. It offers 73,200 PSI tensile strength, excellent corrosion resistance, and superior weldability. Ideal for medium-sized shafts, structural supports, food-grade equipment, and architectural applications. In stock for immediate Los Angeles pickup. Learn More

1/8" diameter 1018 Cold Rolled Steel Round Bar, 144" length. Conforms to ASTM A108 with a tensile strength of 63,800 PSI. The cold drawn process provides a smooth, scale-free finish and tight dimensional tolerances. This small diameter is ideal for manufacturing precision pins, dowels, fastener blanks, and small shafts. In stock for Los Angeles pickup. Learn More

1/2" diameter 1018 Cold Rolled Steel Round Bar, 144" length. Conforms to ASTM A108 with 63,800 PSI tensile strength and a smooth, scale-free finish. Known for its excellent machinability and tight dimensional tolerances, this medium-diameter bar is ideal for manufacturing shafts, axles, bushings, and other precision machined components. In stock for Los Angeles pickup. Learn More

A36 Hot Rolled Steel Round Bar with a 1/2" diameter and 240" length. This versatile, low-carbon steel conforms to ASTM A36 standards, offering a minimum yield strength of 36,000 PSI and excellent weldability for easy fabrication. Its medium diameter is ideal for shafts, axles, support bracing, and general repairs. Available for same-day pickup in Los Angeles. Learn More

3" x 3" x 3/8" Hot Rolled Steel Angle, sold in 240-inch lengths. Conforms to ASTM A36 with a minimum yield strength of 36,000 PSI. This structural angle provides excellent weldability and good machinability. Its medium size is ideal for equipment bases, structural framing, and heavy-duty shelving supports. In stock for Los Angeles pickup. Learn More

1/2" NPS Schedule 40 Galvanized Steel Pipe in 21-foot lengths. Conforms to ASTM A53 Grade B with a 60,000 PSI tensile strength. The hot-dip zinc coating provides superior corrosion resistance for outdoor and high-moisture environments. This small diameter is ideal for plumbing, non-potable water lines, conduit, and residential handrails. In stock for same-day Los Angeles pickup. Learn More

This 4" Heavy Duty Solid V-Groove Wheel is engineered for high-load applications on inverted angle iron track. Constructed from solid steel for maximum durability and smooth operation, it's ideal for industrial sliding gates, material handling carts, and production line systems. Supports significant weight with reliable guidance. Learn More

1/8" diameter 304 Stainless Steel Round Bar, 144" length. Conforms to ASTM A276, this versatile austenitic grade offers excellent corrosion resistance and weldability. Its 73,200 PSI tensile strength makes it suitable for a wide range of applications. The small diameter is ideal for pins, fastener blanks, and precision components in food processing and architectural projects. In stock for Los Angeles pickup. Learn More

1/4" diameter A36 Hot Rolled Steel Round bar in a 240" (20 ft) length. This general-purpose structural steel conforms to ASTM A36 and provides a minimum yield strength of 36,000 PSI. Its low carbon content ensures excellent weldability and formability. The small diameter is ideal for creating pins, dowels, concrete anchors, and custom brackets. In stock for Los Angeles pickup. Learn More

1" OD x 0.065" wall 304 Stainless Steel Round Tube with a 180 grit polished finish. This versatile tubing conforms to ASTM A269, delivering 73,200 PSI tensile strength, excellent weldability, and superior corrosion resistance. Its medium diameter is ideal for architectural handrails, food processing equipment, frames, and decorative applications where a clean, aesthetic finish is required. In stock for immediate Los Angeles pickup. Learn More

3-1/2" x 0.188" wall Hot Rolled Steel Square Tube, 20 ft length. This A500 Grade B structural tubing offers a minimum yield strength of 46,000 PSI and excellent weldability. Its substantial size and strength-to-weight ratio make it ideal for heavy structural applications, including building frames, industrial supports, and heavy equipment bases. In stock for same-day Los Angeles pickup. Learn More

7/16 inch diameter 1018 Cold Rolled Round Bar in 144-inch lengths. Produced to ASTM A108 standards, this bar offers 53,700 PSI yield strength, excellent machinability, and a smooth, scale-free surface. Its tight dimensional tolerances make it ideal for high-precision applications. This small diameter is perfect for manufacturing dowel pins, small shafts, and fastener blanks. In stock for immediate Los Angeles pickup. Learn More

This 6” heavy-duty solid V-groove wheel is engineered for high-capacity industrial applications. Constructed from solid steel for maximum durability, it supports significant load ratings and is designed for reliable operation on angle iron tracks. Ideal for industrial gates, heavy carts, and material handling systems. Learn More

6061-T6 Aluminum Rectangular Tube with 2" x 1" outer dimensions, a 0.120" wall thickness, and 144" length. This versatile extruded profile conforms to ASTM B221 standards. It combines 45,000 PSI tensile strength with excellent weldability and corrosion resistance. Ideal for structural frames, machine guards, marine applications, and architectural projects. In stock for same-day Los Angeles pickup. Learn More

A36 Hot Rolled Steel Angle, 4" x 4" x 3/8" in 20 ft (240") lengths. Conforms to ASTM A36, providing a minimum yield strength of 36,000 PSI with excellent weldability and fabrication characteristics. The large 4-inch legs are ideal for heavy structural applications, building frames, equipment bases, and industrial supports. In stock and available for same-day pickup in Los Angeles. Learn More

This industrial-grade construction adhesive is engineered for high-strength bonding on a variety of substrates. Compliant with ASTM C557 standards, it provides a durable, reliable bond for MRO, fabrication, and construction projects. Ideal for securing panels, framing, and other materials where a permanent hold is critical. Learn More

2-inch Nominal Pipe Size (NPS) 6063-T5 Aluminum Pipe with a Schedule 40 wall, in a 240-inch length. Conforms to ASTM B241 standards with 27,000 PSI tensile strength. Known as architectural aluminum, it offers excellent corrosion resistance and a superior surface finish, making it ideal for handrails, frames, and display fixtures. In stock for same-day Los Angeles pickup. Learn More

1-3/8" diameter 304 Stainless Steel Round Bar, 144" length. Conforms to ASTM A276, this versatile austenitic grade provides 73,200 PSI tensile strength and excellent corrosion resistance. Its weldability and formability make it a standard for general-purpose applications. The medium diameter is ideal for shafts, axles, spacers, and architectural components. In stock for Los Angeles pickup. Learn More

1-7/8" diameter 1018 Cold Rolled Round Bar, 144" length. Conforms to ASTM A108 with 53,700 PSI yield strength and excellent machinability. The cold drawn process provides a smooth finish and tight dimensional tolerances. This medium-diameter bar is ideal for manufacturing shafts, axles, pins, and various machined components requiring strength and precision. In stock for Los Angeles pickup. Learn More

3/4" x 3/4" x 1/8" 6063 Aluminum Angle, 144" length. Known as "architectural aluminum," this grade conforms to ASTM B308 and offers excellent corrosion resistance and a superior surface finish. With 27,000 PSI tensile strength, it's ideal for non-structural applications like window frames, door frames, and decorative trim. In stock for Los Angeles pickup. Learn More

2" x 2" x 3/16" 304 Stainless Steel Angle, available in 240-inch lengths. Conforming to ASTM A276, this angle provides 73,200 PSI tensile strength, excellent corrosion resistance, and superior weldability. Its medium size is ideal for structural framing, equipment bases, shelving, and architectural trim. A fundamental component for fabrication projects requiring both strength and a clean finish. In stock for Los Angeles pickup. Learn More

A professional-grade construction adhesive meeting ASTM C557 standards for strong, reliable bonds. This high-performance adhesive is ideal for bonding a wide range of materials in construction, fabrication, and MRO projects. Formulated for superior adhesion and durability. Learn More

2" x 1" Hot Rolled Steel Rectangular Tube with a 0.120" wall, supplied in 20-foot lengths. This structural tubing conforms to ASTM A500 Grade B, offering 58,000 PSI tensile strength and excellent weldability. Its combination of strength and formability makes it ideal for structural frames, trailer beds, support columns, and industrial fabrication projects. In stock for same-day pickup in Los Angeles. Learn More

A36 Hot Rolled Steel Flat Bar measuring 5/8" wide by 1/4" thick in 240" lengths. Conforming to ASTM A36, this structural steel offers a minimum yield strength of 36,000 PSI and excellent weldability. The small cross-section is ideal for general fabrication, including making support brackets, straps, shims, and small frame stock. In stock for immediate pickup in Los Angeles. Learn More

3" x 1" Hot Rolled Steel Rectangular Tube with a 0.065" wall thickness, available in 20-foot lengths. Manufactured to ASTM A500 Grade B specifications, this structural tubing provides a tensile strength of 58,000 PSI and excellent weldability. Its high strength-to-weight ratio makes it ideal for building frames, trailer construction, support columns, and industrial equipment bases. In stock for immediate pickup in Los Angeles. Learn More

The Super Tool Press Pliers 10" are engineered from high-strength forged alloy steel for superior gripping power and durability. Designed to meet ASME B107 standards, these industrial-grade pliers are essential for demanding fabrication and MRO tasks. Learn More

1/2" x 0.065" wall 304 Stainless Steel Square Tube, sold in 20-foot (240") lengths. Conforms to ASTM A269 with a 73,200 PSI tensile strength. This grade offers an excellent balance of corrosion resistance and weldability. The 180 grit satin finish provides a clean, decorative appearance ideal for architectural railings, frames, and trim. In stock for immediate Los Angeles pickup. Learn More

This industrial-grade HP Air Spray Gun features a durable aluminum body, a 1.88mm nozzle, and a 1000cc aluminum cup. Engineered for high-volume application, it provides excellent atomization for industrial primers, topcoats, and DTM coatings meeting MIL-SPEC performance criteria. Learn More

1" OD x 0.120" wall Hot Rolled Steel Round Tube, available in 20 ft (240") lengths. Conforming to ASTM A500 Grade B, this structural tubing offers 58,000 PSI tensile strength and excellent weldability. Its medium size is ideal for equipment frames, handrails, roll cages, and general fabrication projects. In stock for same-day Los Angeles pickup. Learn More

1/2" NPS Schedule 40 Stainless Steel Pipe, 240" length. This 304 stainless steel pipe conforms to ASTM A312 and has a tensile strength of 73,200 PSI. It combines excellent corrosion resistance and weldability, making it a standard for fluid and gas transport. The small diameter is ideal for instrumentation lines, conduit, and small-scale process piping. In stock for Los Angeles pickup. Learn More

This large industrial slide bolt features a robust 3/4" diameter steel shaft and durable black finish. Engineered for reliable security on heavy-duty gates, doors, and enclosures. Ideal for fabrication and MRO applications. Learn More

3-1/2" x 3-1/2" Hot Rolled Steel Square Tube with a 0.250" wall, supplied in 20-foot lengths. This structural tubing conforms to ASTM A500 Grade B, providing a minimum yield strength of 46,000 PSI and excellent weldability. Its large profile and robust wall thickness make it ideal for heavy-duty structural applications like building frames, supports, and industrial equipment bases. In stock for Los Angeles pickup. Learn More

This industrial-grade 0.8mm (.030") MIG welding wire is supplied on 33 LBS spools. Manufactured to meet or exceed AWS/ASME certification standards, it ensures consistent performance for professional fabrication and repair on mild and low-alloy steels. Learn More

26 Gauge Galvanized PBR Steel Sheet, measuring 36 inches wide by 120 inches long. Conforming to ASTM A653, this panel features a protective zinc coating for excellent corrosion resistance. With a base steel yield strength of 36,000 PSI, it's ideal for roofing, siding, and agricultural structures. Its lightweight profile simplifies installation. In stock for Los Angeles pickup. Learn More

1-5/8" OD x 0.065" wall Type 304 Stainless Steel Round Tube, 20-foot length, with a 180 grit polished finish. This versatile austenitic stainless steel meets ASTM A269 standards and offers 73,200 PSI tensile strength, excellent corrosion resistance, and superior weldability. Its medium diameter is ideal for architectural handrails, food processing equipment frames, and marine hardware. In stock for immediate Los Angeles pickup. Learn More

2-1/2" NPS Schedule 40 Hot Rolled Black Pipe, 21 ft length. Manufactured to ASTM A53 Grade B with 60,000 PSI tensile strength. This large-diameter pipe offers excellent weldability for plumbing, fire protection systems, and structural applications. Its thicker wall provides high-pressure ratings and structural integrity for main water lines, industrial process piping, and support columns. In stock for Los Angeles pickup. Learn More

3/16" x 3/4" Cold Rolled 1018 Steel Flat Bar, 144" length. Conforming to ASTM A108, this bar has a clean, scale-free surface, tight dimensional tolerances, and 63,800 PSI tensile strength. Its excellent machinability and good weldability make it a versatile choice for fabricating custom brackets, straps, and base plates. In stock Los Angeles. Learn More

The Eagle EG642 is a 1-button visor remote transmitter featuring advanced rolling code technology for secure access control. Its universal design is compatible with a wide range of gate and garage door openers. Built for reliability, this remote offers simple push-button programming and a convenient visor clip for in-vehicle use. In stock for same-day pickup in Los Angeles. Learn More

2-1/2" x 0.120" wall A500 Grade B Hot Rolled Steel Square Tube, sold in 20 ft lengths. Conforming to ASTM A500, it offers 58,000 PSI tensile strength and excellent weldability. This medium-sized structural tubing is ideal for equipment frames, handrails, trailer manufacturing, and general fabrication projects requiring a high strength-to-weight ratio. In stock for same-day Los Angeles pickup. Learn More

2 inch Schedule 40 Hot Rolled Black Pipe. Conforms to ASTM A53 Grade B standards, offering 60,000 PSI tensile strength and excellent weldability for strong, reliable joints. This medium-sized pipe is ideal for plumbing mains, HVAC piping, fire sprinkler systems, and structural applications like handrails and support posts. In stock and ready for same-day pickup in Los Angeles. Learn More

3" x 3/16" A36 Hot Rolled Steel Flat Bar, supplied in a 240" length. Conforming to ASTM A36, this versatile structural steel offers a minimum yield strength of 36,000 PSI and excellent weldability for easy fabrication. Its medium size is ideal for structural bracing, machine ways, and general repair work. In stock for immediate Los Angeles pickup. Learn More

This 1/2" x 4-1/2" industrial masonry drill bit is engineered for high-performance drilling in concrete, brick, and block. It features a durable tungsten carbide tip and complies with ANSI B212.15 standards, ensuring precision and long service life for demanding applications. Learn More

Size 9-1/2 industrial rubber boots with a 16" height for maximum coverage. Built for demanding job site conditions, these waterproof boots offer reliable protection against water, mud, and debris. The durable rubber construction and treaded, slip-resistant sole provide safety and comfort for fabricators, construction workers, and maintenance personnel. In stock for Los Angeles pickup. Learn More

3/4 inch 1018 Cold Rolled Steel Square Bar, sold in 144" lengths. This general-purpose low-carbon steel conforms to ASTM A108, offering excellent machinability and a clean, smooth surface finish. The cold drawing process increases strength to 63,800 PSI and provides tight dimensional tolerances, making it ideal for shafts, fixtures, and precision machined parts. In stock Los Angeles. Learn More

3/8" x 3/4" 6061-T6 Aluminum Flat Bar, sold in 144" lengths. Conforms to ASTM B211 standards, delivering 45,000 PSI tensile strength with good machinability and excellent weldability. This small-width bar is ideal for manufacturing brackets, straps, shims, and small frame components where a high strength-to-weight ratio is essential. In stock for same-day Los Angeles pickup. Learn More

10 Gauge A36 Hot Rolled Steel Sheet, measuring 48" x 120". Certified to ASTM A36, this sheet offers a minimum yield strength of 36,000 PSI and tensile strength of 58,000-80,000 PSI. Its excellent weldability and good formability make it a cost-effective choice for structural applications, gusset plates, and general fabrication projects where precise tolerances are not required. In stock for immediate Los Angeles pickup. Learn More

304 Stainless Steel Flat Bar measuring 3" wide by 3/16" thick, sold in 144" lengths. This versatile bar conforms to ASTM A276 standards and provides excellent corrosion resistance and weldability. Its 73,200 PSI tensile strength makes it ideal for structural bracing, equipment frames, and general fabrication. In stock for immediate Los Angeles pickup or delivery. Learn More

5 inch Nominal Pipe Size (NPS) Galvanized Steel Pipe with a Schedule 40 wall thickness (0.258"), available in 21 ft lengths. Conforms to ASTM A53 Grade B with 60,000 PSI tensile strength. The hot-dip zinc coating provides superior corrosion resistance for outdoor and high-moisture use. This large diameter pipe is ideal for structural columns, main water lines, and industrial process piping. In stock for Los Angeles pickup. Learn More

2" x 3/8" 1018 Cold Rolled Steel Flat Bar, 144" length. Conforms to ASTM A108 with 63,800 PSI tensile strength. This grade offers a smooth, scale-free finish, tight dimensional tolerances, and excellent machinability. Its medium width is ideal for structural bracing, machine ways, wear strips, and general fabrication projects requiring precision. In stock Los Angeles. Learn More

2" Nominal Pipe Size (NPS) Galvanized Steel Pipe, Schedule 40 wall, 21-foot length. Conforms to ASTM A53 Grade B with 60,000 PSI tensile strength. The hot-dip zinc coating provides excellent corrosion resistance for outdoor and high-moisture use. Ideal for plumbing mains, HVAC piping, handrails, and structural posts. In stock for same-day Los Angeles pickup. Learn More

3/4" wide by 3/8" thick 304 Stainless Steel Flat Bar, 144" length. Conforming to ASTM A276, this austenitic stainless steel offers excellent corrosion resistance and weldability with 73,200 PSI tensile strength. Its versatile rectangular profile is ideal for small structural supports, food processing equipment framework, architectural trim, and general fabrication projects. In stock for same-day Los Angeles pickup. Learn More

26 Gauge x 36" x 144" Galvanized PBR (Purlin Bearing Rib) sheet, compliant with ASTM A653. Features a protective zinc coating for excellent corrosion resistance and a minimum yield strength of 36,000 PSI. This lightweight, durable panel is ideal for commercial, residential, and agricultural roofing and siding applications requiring structural integrity and weather protection. In stock for Los Angeles pickup. Learn More

5/16 inch diameter 304 Stainless Steel Round Bar, 144" length. Conforms to ASTM A276 and delivers 73,200 PSI tensile strength. This versatile grade combines excellent corrosion resistance with superior weldability and good formability. Its small diameter is ideal for creating precision pins, dowels, fastener blanks, and small shafts. In stock for same-day Los Angeles pickup. Learn More

3/4 inch Nominal Pipe Size (NPS) Schedule 40 Galvanized Steel Pipe, 21 ft length. Manufactured to ASTM A53 Grade B specifications, this pipe offers a minimum tensile strength of 60,000 PSI and superior corrosion resistance from its hot-dip zinc coating. Ideal for outdoor structures, non-potable water plumbing, handrails, and fencing. In stock and available for same-day pickup in Los Angeles. Learn More

2" x 2" x 0.120" wall 304 Stainless Steel Square Tube, supplied in 20-foot lengths. Conforms to ASTM A269 with 73,200 PSI tensile strength, excellent weldability, and superior corrosion resistance. This medium-sized tube is ideal for structural applications like equipment frames, support columns, architectural handrails, and guardrails where strength and aesthetics are required. In stock for same-day Los Angeles pickup. Learn More

16 Gauge (48" x 120") A36 Hot Rolled Steel Sheet. This material conforms to ASTM A36 and offers a minimum yield strength of 36,000 PSI, providing excellent weldability and good formability. Its medium thickness is ideal for structural panels, machine guards, trailer frames, and general fabrication projects where precise dimensions are not critical. A cost-effective solution for robust applications. In stock for Los Angeles pickup. Learn More

22 Gauge (0.0299") Cold Rolled Steel Sheet, measuring 48" x 120". Typically produced from 1018 steel, this sheet offers a smooth, scale-free surface, superior dimensional tolerance, and excellent formability. Its thin gauge is perfect for automotive panels, appliance casings, electronic enclosures, and other applications requiring a paint-ready finish. In stock for same-day Los Angeles pickup. Learn More

This industrial-grade 5/16" x 4-1/2" masonry drill bit is engineered for high-performance drilling in concrete, brick, and block. It features a durable tungsten carbide tip for extended life and precision, manufactured to meet ANSI B212.15 standards. Learn More

304 Stainless Steel Flat Bar measuring 2" wide by 3/16" thick, in a 144" length. This versatile bar meets ASTM A276 standards and offers 73,200 PSI tensile strength, excellent corrosion resistance, and superior weldability. Its medium size is ideal for structural bracing, machine components, food equipment frames, and architectural trim. In stock for same-day Los Angeles pickup. Learn More

This industrial-grade 0.9mm (.035) MIG welding wire is engineered for high-performance fabrication and repair. Certified to meet AWS/ASME standards, it provides a stable arc and minimal spatter for clean, strong welds on various steel types. Available in an 11 LBS (1KG) spool. Learn More

Industrial Caster 251 is a heavy-duty mobility solution designed for demanding environments. Featuring an industrial-grade build with certified load ratings from 200-2000 lbs, it provides reliable movement for equipment, carts, and workbenches. Learn More

0.080" thick 6061-T6 Aluminum Sheet, 48" x 144". This versatile sheet conforms to ASTM B209, offering 45,000 PSI tensile strength, good machinability, and excellent corrosion resistance. The T6 temper provides optimal strength for structural applications. This medium-thickness sheet is ideal for structural panels, machine guards, base plates, and vehicle body panels. In stock and ready for same-day cutting and pickup in Los Angeles. Learn More

3" x 3/8" 304 Stainless Steel Flat Bar, 144" length. Conforms to ASTM A276, this austenitic grade provides 73,200 PSI tensile strength, excellent corrosion resistance, and superior weldability. Its versatile rectangular profile is ideal for structural bracing, equipment framework, food processing components, and architectural trim. In stock for immediate cutting and Los Angeles pickup. Learn More

This high-performance 0.8mm (.030") MIG welding wire is engineered for superior results in fabrication and repair. AWS/ASME certified, it ensures strong, consistent welds on mild and carbon steels. Packaged in convenient 11 LBS (1KG) spools for project efficiency. Learn More

3/4" x 3/4" 6061-T6 Aluminum Square Bar, sold in 144" lengths. This versatile structural alloy conforms to ASTM B211 and features 45,000 PSI tensile strength, good machinability, and excellent weldability. The medium size is ideal for support brackets, jigs, fixtures, and machined components requiring a high strength-to-weight ratio. In stock Los Angeles. Learn More

3/16" x 3/4" Type 304 Stainless Steel Flat Bar, 144" length. Conforms to ASTM A276, offering 73,200 PSI tensile strength, excellent corrosion resistance, and superior weldability. This versatile, small-profile flat bar is ideal for manufacturing brackets, frame components, architectural trim, and food processing equipment supports. Dual-certified 304/304L for enhanced welding performance. In stock for immediate Los Angeles pickup. Learn More

3/4" x 3/8" 1018 Cold Rolled Flat Bar, 144" length. Conforms to ASTM A108 with 63,800 PSI tensile strength. The cold drawing process provides a smooth, scale-free finish and tight dimensional tolerances, making it excellent for machining and welding. This small size is ideal for making brackets, straps, shims, and small frame stock. In stock for Los Angeles pickup. Learn More

5/8" x 5/8" 1018 Cold Rolled Square Bar in 144" lengths. Produced to ASTM A108 standards, this bar offers a tensile strength of 63,800 PSI, excellent machinability, and a superior surface finish. Its tight dimensional tolerances make it ideal for shafts, fixtures, and precision machined components requiring minimal prep work. In stock for same-day Los Angeles pickup. Learn More

3/4" x 3/16" Hot Rolled Steel Flat Bar, 240" length. Conforms to ASTM A36 with 36,000 PSI minimum yield strength and excellent weldability. This general-purpose structural steel is easy to form, drill, and weld. Its small profile is ideal for making brackets, support straps, shims, and frame stock for general fabrication projects. In stock for Los Angeles pickup. Learn More

Our 5" (5/8) J-Bolt Adjustable Barrel Hinges are engineered from heavy-duty, weldable low carbon steel for superior strength and durability. Designed for high-load applications, these hinges provide smooth, reliable operation for heavy gates and doors. The adjustable J-bolt allows for precise alignment during installation. Learn More

3/8" x 3/8" 6061-T6 Aluminum Square Bar in 144" lengths. This versatile structural alloy conforms to ASTM B211 and provides a high strength-to-weight ratio, good machinability, and excellent weldability. The 45,000 PSI tensile strength makes it ideal for small brackets, machine parts, jigs, and fixtures. In stock for Los Angeles pickup. Learn More

7/8" diameter 6061-T6 Aluminum Round Bar, 144" length. Conforms to ASTM B211, offering a high strength-to-weight ratio with 45,000 PSI tensile strength. This versatile alloy provides excellent machinability, weldability, and corrosion resistance. Its medium diameter is ideal for shafts, axles, spacers, and custom machined components. In stock for same-day Los Angeles pickup. Learn More

This 5/16" x 2" one-way screw is a tamper-resistant fastener made from industrial-grade low carbon steel with a protective black finish. Designed for security applications based on ASTM A307 material standards where removal prevention is critical. Learn More

14 Gauge (48" x 120") A36 Hot Rolled Steel Sheet. Conforms to ASTM A36 with a minimum yield strength of 36,000 PSI. This versatile material offers excellent weldability and good formability, making it a cost-effective choice for various applications. Ideal for structural panels, machine guards, trailer frames, and general fabrication projects. In stock for same-day Los Angeles pickup. Learn More

This industrial utility block is a versatile hardware component for MRO and fabrication. Made from durable, general-purpose low-carbon steel, it serves as a reliable spacer, shim, or mounting base. Its precise dimensions ensure stability in various industrial applications. Learn More

5/16" x 5/16" 304 Stainless Steel Square Bar, available in 144" lengths. Certified to ASTM A276, this bar provides a tensile strength of 73,200 PSI with excellent weldability and corrosion resistance. Its small profile is ideal for light structural supports, braces, frames, and decorative architectural work. This versatile, non-magnetic bar is ready for fabrication. In stock for Los Angeles pickup. Learn More

3/4" x 3/4" 304 Stainless Steel Square Bar, 144" length. Conforms to ASTM A276 specifications. This austenitic grade combines 73,200 PSI tensile strength with excellent corrosion resistance and weldability. The medium 3/4" profile is ideal for structural supports, frames, shafts, and braces in food processing and architectural applications. In stock for Los Angeles pickup. Learn More

18 Gauge 304 Stainless Steel Sheet (48" x 120") with a #4 brushed finish and protective PVC coating. Conforming to ASTM A240, this versatile sheet offers excellent corrosion resistance, formability, and 73,200 PSI tensile strength. Its lightweight yet durable profile is ideal for architectural panels, kitchen backsplashes, and food processing equipment. In stock for same-day Los Angeles pickup. Learn More

16 gauge Cold Rolled Steel Sheet (48" x 120"), typically 1018 grade. Features 63,800 PSI tensile strength, excellent formability, and a smooth, clean surface that is ideal for painting and finishing. This thin gauge sheet is perfect for automotive panels, appliance casings, custom brackets, and enclosures. In stock for same-day Los Angeles pickup. Learn More

12 Gauge (48" x 120") Cold Rolled Steel Sheet, typically 1018 grade. Conforms to ASTM A1008 specifications and provides a tensile strength of 63,800 PSI. The cold reduction process creates a smooth, clean surface finish and tight dimensional tolerances, making it ideal for forming and welding. Excellent for automotive panels, appliance casings, and equipment enclosures. In stock for Los Angeles pickup. Learn More

AWS A5.1 E6013 certified all-purpose welding rod for mild steel applications. This 3/32" diameter electrode provides a smooth, stable arc and easy slag removal, ideal for general fabrication and MRO. Designed for AC or DC operation in all positions. Learn More

Engineered for strength and durability, these 5x5 Heavy Duty Weldable Butt Hinges are essential for industrial gates, doors, and custom fabrication. Made from high-quality, weldable low-carbon steel, they provide a secure and permanent pivot point. Ideal for heavy-duty applications requiring robust performance. Learn More

5/8" x 5/8" 6061-T6 Aluminum Square Bar, sold in 144" lengths. Conforms to ASTM B211, offering a high strength-to-weight ratio with 40,000 PSI yield strength. Known for excellent machinability, weldability, and corrosion resistance, it's ideal for structural frames, support brackets, and precision machined parts. In stock for immediate cutting and pickup in Los Angeles. Learn More

3/8" x 3/8" 1018 Cold Rolled Steel Square Bar, 144" length. Conforms to ASTM A108 with a tensile strength of 63,800 PSI. The cold drawing process provides tight dimensional tolerances and a clean, smooth surface finish, ideal for machining. This small size is excellent for shafts, dowels, pins, and fixtures. In stock for Los Angeles pickup. Learn More

The Eagle-1 is a complete slide gate operator kit for residential applications. Its powerful 1/2 HP continuous-duty motor handles gates up to 18 feet and 300 lbs. This easy-to-install package includes two wireless remotes and a monitored reflective photo eye for enhanced security and safety. Ideal for automating driveway gates with reliable performance. In stock Los Angeles. Learn More

Durable split leather work gloves designed for industrial use. These gloves are ANSI/ISEA 105 rated and feature a reinforced palm for enhanced grip and abrasion resistance, ideal for material handling and fabrication. Learn More

Durable 14" brown leather welding gloves engineered for high-heat protection. These industrial-grade gloves meet ANSI/ISEA 105 standards for cut and abrasion resistance, making them ideal for professional welding and fabrication. Learn More

A36 Hot Rolled Steel Sheet, 12 Gauge thickness (0.1046") with standard 48" x 120" dimensions. Certified to ASTM A36, this sheet offers a minimum yield strength of 36,000 PSI, excellent weldability, and good formability. Its medium thickness is ideal for structural panels, machine guards, vehicle body panels, and general fabrication projects where a precise finish is not required. In stock for Los Angeles pickup. Learn More

This 5/16" x 3" one-way screw is engineered for permanent, tamper-resistant applications. Manufactured from industrial-grade steel with a protective black finish, its unique drive system prevents removal once installed. Conforms to common ANSI/ASME dimensional standards. Learn More

0.125" x 48" x 120" 3003-H14 Aluminum Sheet. This versatile sheet conforms to ASTM B209, offering excellent formability, weldability, and good corrosion resistance. With a tensile strength of 22,000 PSI, this medium-thickness sheet is ideal for structural panels, machine guards, trailer siding, and general sheet metal fabrication. In stock for same-day cutting and pickup in Los Angeles. Learn More

3/4" x 5/16" 1018 Cold Rolled Steel Flat Bar, 144" length. Conforms to ASTM A108, providing 63,800 PSI tensile strength, a smooth surface finish, and tight dimensional tolerances. This grade offers good machinability and weldability. Its small profile is ideal for manufacturing precision brackets, straps, shims, and small frame components. In stock for Los Angeles pickup. Learn More

3/4" diameter Cold Rolled All Thread Rod in 10-foot lengths with a standard oil finish. Made from low-carbon steel, this rod offers good strength (approx. 63,800 PSI tensile) and conforms to ASTM A307 Grade A strength requirements. The continuous threading provides versatile performance for anchoring, fastening, bracing, and suspending systems in construction and manufacturing. In stock for same-day Los Angeles pickup. Learn More

The 2-Way Hand Riveter is an industrial-grade tool for reliable fastening in fabrication and MRO. Constructed from high-strength steel alloy, it provides the leverage needed for setting aluminum and steel rivets. Includes multiple nose pieces for versatility. Learn More