Search results for: 'taxabl cuadrado de 2imedia x 2 immedi'

This 1/4" x 4-1/4" Cobalt Industrial Drill Bit is engineered from M35 steel with 5% cobalt for superior heat resistance. Conforming to ANSI/ASME B94.11M standards, its 135° split-point tip ensures precise starts and is ideal for drilling into stainless steel and cast iron. Learn More

7” X 1.6MM X ⅞” CUT-OFF WHEEL, RPM:8,500 Learn More

A36 Hot Rolled Steel Channel measuring 1" wide x 1/2" high x 1/8" thick in 20-foot lengths. This general-purpose structural steel conforms to ASTM A36 and provides a minimum yield strength of 36,000 PSI. Its excellent weldability and formability make it ideal for light structural applications, equipment frames, trailer components, and mounting brackets. In stock for Los Angeles pickup. Learn More

1-1/2" x 3/4" Hot Rolled Steel Rectangular Tube with a 0.065" wall, sold in 20-foot lengths. Conforms to ASTM A500 Grade B with 58,000 PSI tensile strength and excellent weldability. This hollow structural section (HSS) is ideal for trailer frames, equipment bases, gate frames, and other general fabrication projects requiring a good strength-to-weight ratio. In stock for Los Angeles pickup. Learn More

This 1/8" x 1/2" 304 Stainless Steel Flat Bar, sold in 144" lengths, is a versatile and corrosion-resistant material conforming to ASTM A276. With excellent weldability and ductility, it's a staple for general fabrication. Its small profile is perfectly suited for creating durable brackets, support straps, shims, and decorative trim. In stock and available for same-day pickup in Los Angeles. Learn More

6061-T6 Aluminum Flat Bar, 1-1/2" wide by 1/8" thick, in 144" lengths. This versatile, heat-treatable grade conforms to ASTM B211 and offers 45,000 PSI tensile strength, good machinability, and excellent weldability. The medium width is ideal for structural bracing, support brackets, machine ways, and general fabrication projects. In stock for same-day pickup in Los Angeles. Learn More

1-1/2" wide by 3/16" thick 6061-T6 Aluminum Flat Bar, sold in 144" lengths. Conforming to ASTM B211, this versatile alloy offers 45,000 PSI tensile strength, good machinability, and excellent corrosion resistance. This medium-width bar is ideal for structural bracing, machine ways, and custom fabricated components. In stock for Los Angeles pickup. Learn More

6061-T6 Aluminum Flat Bar measuring 1/4" thick by 1-1/2" wide, in a 144" length. Conforming to ASTM B211, this versatile bar offers a high strength-to-weight ratio with 45,000 PSI tensile strength, good machinability, and excellent corrosion resistance. Ideal for structural bracing, machine ways, and custom fabricated parts. In stock for same-day Los Angeles pickup. Learn More

6061-T6 Aluminum Flat Bar, 1-1/2" wide by 3/8" thick. This versatile, heat-treatable grade conforms to ASTM B211 standards, offering a high strength-to-weight ratio with 45,000 PSI tensile strength. It combines good machinability with excellent weldability and corrosion resistance. Ideal for structural bracing, machine ways, and custom fabricated parts. In stock for same-day Los Angeles pickup. Learn More

1-1/2" x 5/8" 6061-T6 Aluminum Flat Bar, 144" length. Conforms to ASTM B211 with 45,000 PSI tensile strength, excellent weldability, and corrosion resistance. This versatile, medium-width bar is ideal for structural bracing, machine ways, mounting plates, and general fabrication. Its high strength-to-weight ratio makes it a top choice for projects requiring robust yet lightweight components. In stock for same-day Los Angeles pickup. Learn More

A 3/4" thick by 1-1/2" wide 6061-T6 Aluminum Flat Bar, supplied in a 144" length. This bar meets ASTM B211 specifications and offers 45,000 PSI tensile strength. Its combination of strength, excellent weldability, and corrosion resistance makes it ideal for structural bracing, machine ways, base plates, and custom fabricated parts. In stock Los Angeles. Learn More

1/8" x 1/2" 1018 Cold Rolled Steel Flat Bar, 144" length. Conforms to ASTM A108 with 63,800 PSI tensile strength and a smooth, scale-free finish. This grade offers excellent machinability and weldability, making its small profile ideal for fabricating custom brackets, straps, shims, and support braces. In stock for immediate Los Angeles pickup. Learn More

3/16" x 1/2" 1018 Cold Rolled Steel Flat Bar, 144" length. Conforms to ASTM A108 with 63,800 PSI tensile strength and excellent machinability. The smooth, scale-free surface and tight dimensional tolerances make it ideal for fabrication of small parts like brackets, straps, and shims that require a clean finish and precision. In stock for Los Angeles pickup. Learn More

1/4" x 1/2" Cold Rolled 1018 Steel Flat Bar, 144" length. Conforms to ASTM A108 standards, offering 63,800 PSI tensile strength, tight dimensional tolerances, and excellent machinability. The smooth, scale-free cold drawn finish is ideal for precision parts. This small size is perfect for manufacturing brackets, shims, and straps. In stock for same-day Los Angeles pickup. Learn More

1/2" x 3/4" 1018 Cold Rolled Steel Flat Bar, sold in 144" lengths. This product meets ASTM A108 specifications and offers 63,800 PSI tensile strength, a smooth surface finish, and tight dimensional tolerances. Its excellent machinability and good weldability make it a versatile choice. The small profile is ideal for brackets, straps, and shims. In stock for Los Angeles pickup. Learn More

1-1/2" x 1" 1018 Cold Rolled Steel Flat Bar, 144" length. Conforms to ASTM A108 with 63,800 PSI tensile strength and excellent machinability. The cold drawing process provides a smooth, scale-free surface and tight dimensional tolerances. This medium-width bar is ideal for structural bracing, machine ways, and base plates requiring precision and a clean finish. In stock for Los Angeles pickup. Learn More

This 1/2" x 1/8" A36 Hot Rolled Steel Flat Bar, supplied in a 20-foot length, is a versatile structural material conforming to ASTM A36 standards. It features a minimum yield strength of 36,000 PSI and excellent weldability. The small profile is perfect for manufacturing light-duty brackets, support straps, shims, and general fabrication projects where strength and economy are key. In stock and available for same-day Los Angeles pickup. Learn More

A36 Hot Rolled Steel Flat Bar, 1/2" wide by 3/16" thick. This general-purpose structural steel conforms to ASTM A36 and provides excellent weldability and formability with a minimum yield strength of 36,000 PSI. Its small cross-section is ideal for light-duty brackets, support straps, shims, and ornamental ironwork. In stock for immediate Los Angeles pickup. Learn More

A36 Hot Rolled Steel Flat Bar, 1/2" width by 1/4" thickness in 240" lengths. Conforming to ASTM A36, this bar offers a minimum 36,000 PSI yield strength and excellent weldability. Its small dimensions make it ideal for light-duty brackets, support straps, shims, and general fabrication projects. In stock for same-day Los Angeles pickup. Learn More

1/2" x 3/8" A36 Hot Rolled Steel Flat Bar, sold in 240" lengths. This structural steel conforms to ASTM A36, offering a minimum yield strength of 36,000 PSI and excellent weldability. The hot-rolled process results in a scaly mill finish. Its small dimensions make it ideal for fabricating support brackets, straps, shims, and general frame stock. In stock for Los Angeles pickup. Learn More

3/4" x 1/2" Hot Rolled Steel Flat Bar, 240" length. A versatile structural steel conforming to ASTM A36 with 36,000 PSI minimum yield strength. Known for its excellent weldability and good formability. The small width is ideal for fabricating custom brackets, support straps, shims, and light-duty frames. In stock for immediate Los Angeles pickup. Learn More

This 4" x 4" Heavy Duty Square Steel Base Plate is a robust mounting solution for structural applications. Made from industrial-grade flat steel and pre-drilled with holes for easy anchoring, it provides a stable foundation for posts, columns, and machinery. Ideal for fabrication and construction projects requiring a durable mounting point. Learn More

1-1/2 inch OD Type 304 Stainless Steel Round Tube with a 0.120 inch wall and a 180 grit polished finish. Conforms to ASTM A269, offering 73,200 PSI tensile strength, excellent weldability, and strong corrosion resistance. This medium-sized tube is ideal for architectural handrails, food service equipment, and marine hardware. In stock for Los Angeles pickup. Learn More

1/2" x 1/2" 6061-T6 Aluminum Square Bar, 144" length. Conforms to ASTM B211. This structural alloy provides an excellent strength-to-weight ratio with 45,000 PSI tensile strength, good machinability, and superior corrosion resistance. Its sharp corners and dimensional accuracy make it ideal for fabricating structural frames, support brackets, and precision machined components. In stock for immediate Los Angeles pickup. Learn More

1/8" x 1-1/2" 304 Stainless Steel Flat Bar, 144" length. Conforms to ASTM A276, providing 73,200 PSI tensile strength, excellent weldability, and superior corrosion resistance. This versatile, medium-sized bar is ideal for structural bracing, machine components, architectural trim, and food processing equipment framework. In stock for same-day cutting and Los Angeles pickup. Learn More

304 Stainless Steel Flat Bar, 1-1/2" wide by 1/4" thick. Conforms to ASTM A276, this versatile bar offers excellent corrosion resistance, weldability, and 73,200 PSI tensile strength. Its medium size is ideal for structural bracing, machine ways, equipment frames, and architectural trim. Annealed condition provides good formability. In stock and available for same-day pickup in Los Angeles. Learn More

1-1/4" x 1/2" 304 Stainless Steel Flat Bar, 144" length. Conforming to ASTM A276, this austenitic stainless offers 73,200 PSI tensile strength, excellent weldability, and superior corrosion resistance. Its versatile rectangular profile is ideal for structural bracing, equipment framework, and architectural trim. This medium-width bar is a durable choice for food processing and general fabrication. In stock for Los Angeles pickup. Learn More

This 6” heavy-duty solid V-groove wheel is engineered for high-capacity industrial applications. Constructed from solid steel for maximum durability, it supports significant load ratings and is designed for reliable operation on angle iron tracks. Ideal for industrial gates, heavy carts, and material handling systems. Learn More

1018 Cold Rolled Steel Flat Bar, 1-1/2" wide by 1/8" thick in 144" lengths. Conforming to ASTM A108, this bar offers a tensile strength of 63,800 PSI, excellent machinability, and a smooth, scale-free surface. Its tight dimensional tolerances make it ideal for fabricating precision parts like mounting brackets, machine ways, and base plates. In stock for same-day Los Angeles pickup. Learn More

This 1-1/2" x 3/16" Cold Rolled Flat Bar is made from 1018 steel, conforming to ASTM A108 standards. It offers 63,800 PSI tensile strength, a smooth, scale-free surface, and tight dimensional tolerances. With good machinability and weldability, it's ideal for manufacturing brackets, base plates, and machine components. Available for same-day pickup in Los Angeles. Learn More

1018 Cold Rolled Flat Bar, 1-1/2" wide by 1/4" thick, in a 144" length. Conforming to ASTM A108, this bar offers a tensile strength of 63,800 PSI, excellent machinability, and a smooth, scale-free surface. Its tight dimensional tolerances make it ideal for manufacturing brackets, base plates, and structural components requiring precision. In stock for immediate Los Angeles pickup. Learn More

1-1/2" x 3/8" 1018 Cold Rolled Flat Bar in 144" lengths. Conforms to ASTM A108, delivering 63,800 PSI tensile strength with excellent machinability. The cold drawn process provides a smooth, scale-free finish and tight dimensional tolerances. This medium width is ideal for structural bracing, machine ways, base plates, and custom fabrication projects. In stock for Los Angeles pickup. Learn More

1-1/4" x 1/2" Cold Rolled 1018 Steel Flat Bar, 144" length. Conforms to ASTM A108 with 63,800 PSI tensile strength. The cold drawing process provides a smooth, scale-free finish and tight dimensional tolerances, making it excellent for machining. This medium-width bar is ideal for structural bracing, machine ways, base plates, and mounting brackets. In stock for Los Angeles pickup. Learn More

A36 Hot Rolled Steel Flat Bar, 1-1/2" wide by 1/8" thick. This general-purpose structural steel conforms to ASTM A36 standards and offers a minimum yield strength of 36,000 PSI with excellent weldability. Its medium width is ideal for fabricating structural bracing, equipment frames, machine ways, and general repair work. Stocked in 240" (20 ft) lengths for immediate pickup in Los Angeles. Learn More

A36 Hot Rolled Steel Flat Bar, 1-1/2" wide by 3/16" thick, in 240-inch lengths. Conforms to ASTM A36 with 36,000 PSI minimum yield strength. This low-carbon steel offers excellent weldability and good formability. As a medium-width bar, it is ideal for structural bracing, equipment frames, base plates, and general fabrication projects. In stock for immediate Los Angeles pickup. Learn More

1-1/2 inch wide by 1/4 inch thick Hot Rolled Steel Flat Bar. Manufactured from A36 carbon structural steel, this bar meets ASTM A36 standards and offers a minimum yield strength of 36,000 PSI. Its excellent weldability and good machinability make it ideal for structural bracing, machine ways, supports, and general fabrication projects. In stock and ready for same-day pickup in Los Angeles. Learn More

3-1/2" x 1/4" Hot Rolled Steel Flat Bar, 240" length. Conforms to ASTM A36 with 36,000 PSI minimum yield strength and excellent weldability. This low carbon steel is easy to fabricate using common structural methods. Its large width makes it ideal for base plates, heavy structural components, and trailer frames where strength and durability are required. In stock Los Angeles. Learn More

1-1/2" x 3/8" Hot Rolled Steel Flat Bar, 240" length. A general-purpose structural steel conforming to ASTM A36 with a minimum yield strength of 36,000 PSI. This bar offers excellent weldability and is easy to drill, form, and machine. Its medium size is ideal for structural bracing, machine ways, base plates, and equipment repair projects. In stock for Los Angeles pickup. Learn More

1-1/4" x 1/2" A36 Hot Rolled Steel Flat Bar, sold in 240-inch (20 ft) lengths. This structural steel conforms to ASTM A36 and provides a minimum yield strength of 36,000 PSI. Its excellent weldability and formability make it a versatile choice for general fabrication. This medium-width bar is ideal for structural bracing, equipment frames, and base plates. In stock for Los Angeles pickup. Learn More

A36 Hot Rolled Steel Flat Bar measuring 1-1/2" wide by 3/4" thick in 20-foot lengths. This structural steel conforms to ASTM A36, offering 58,000 PSI tensile strength and excellent weldability. The medium size is ideal for structural bracing, machine ways, equipment frames, and general fabrication projects. Its rough, scaled surface is suitable where strength is the primary concern. In stock Los Angeles. Learn More

3/16" x 1-1/2" 304 Stainless Steel Flat Bar in a 144" length. Conforming to ASTM A276, this versatile bar offers excellent corrosion resistance, high ductility, and superior weldability. Its 73,200 PSI tensile strength makes it ideal for structural bracing, machine ways, and equipment framework. This medium-width bar is a popular choice for fabrication projects. In stock for Los Angeles pickup. Learn More

1-1/2" OD x 0.065" wall 304 Stainless Steel Round Tube, supplied in 20-foot lengths. Conforms to ASTM A269, featuring a 73,200 PSI tensile strength, excellent weldability, and corrosion resistance. The 180 grit polished finish provides a clean, decorative appearance ideal for architectural handrails, equipment frames, and structural supports. In stock for immediate Los Angeles pickup. Learn More

2 inch diameter 6061-T6 Aluminum Round Bar, 144" length. Conforms to ASTM B211, offering 45,000 PSI tensile strength, good machinability, and excellent corrosion resistance. This medium-diameter bar is a versatile choice for shafts, axles, structural components, and general-purpose machined parts. In stock for immediate Los Angeles pickup. Learn More

Regal Cuter Set 2 Pcs (2-1/2" and 3-7/8") Heavy Duty Utility Cutter Set Learn More

1-1/4" x 1/2" x 1/8" A36 Hot Rolled Steel Channel, sold in 20 ft lengths. This bar-size channel conforms to ASTM A36 specifications and offers a minimum yield strength of 36,000 PSI. Its excellent weldability and good machinability make it a versatile choice for general fabrication. Ideal for small equipment frames, structural brackets, and support braces. In stock for Los Angeles pickup. Learn More

1/2" x 1/2" A36 Hot Rolled Steel Square Bar, 240" length. Conforms to ASTM A36 with 36,000 PSI minimum yield strength and excellent weldability. Its balance of strength and cost-effectiveness makes it a foundational material for fabrication. The medium 1/2" size is ideal for equipment frames, support braces, and structural repairs. In stock for Los Angeles pickup. Learn More

Industrial Caster 251 is a heavy-duty mobility solution designed for demanding environments. Featuring an industrial-grade build with certified load ratings from 200-2000 lbs, it provides reliable movement for equipment, carts, and workbenches. Learn More

This 1-1/4" square pressed steel cap provides a clean, finished look for fence posts and railings. Made from durable, weldable mild steel, it protects post interiors from debris and weather. Ideal for ornamental and security fencing applications. Learn More

The Bobco Auto Darkening Weld Helmet provides superior protection, meeting ANSI/ISEA Z87.1+ standards for impact resistance. It features a large 3.94” x 3.15” viewing area for maximum visibility and is constructed from a lightweight, durable high-impact resistant material. Learn More

1/2" x 1/2" 304 Stainless Steel Square Bar, 144" length. Conforms to ASTM A276, offering an excellent balance of strength, corrosion resistance, and weldability. With 73,200 PSI tensile strength, this versatile bar is ideal for structural supports, frames, shafts, and general fabrication. Its clean finish is suitable for architectural and food-grade applications. In stock for Los Angeles pickup. Learn More

1/2" x 1/2" 1018 Cold Rolled Square Bar in 144" lengths. Produced to ASTM A108 standards, this low-carbon steel offers a clean surface, tight dimensional tolerances, and excellent machinability. With a tensile strength of 63,800 PSI, it is ideal for medium-duty applications like shafts, fixtures, and precision machined components where a superior finish is required. In stock for Los Angeles pickup. Learn More

This industrial-grade Galvanized Corner Guard is manufactured from 16 gauge steel for high-impact wall and corner protection. It features a G90 hot-dip galvanized coating compliant with ASTM A653 for excellent corrosion resistance in commercial and MRO applications. Learn More

Protect high-traffic areas with our Galvanized Corner Guard. Made from durable 16 gauge steel with a G90 galvanized coating for superior corrosion resistance, conforming to ASTM A653 standards. Ideal for industrial, commercial, and MRO applications requiring robust wall and corner protection. Learn More

1/2" thick A36 Hot Rolled Steel Plate, 48" x 120". A structural carbon steel conforming to ASTM A36, it provides a guaranteed minimum yield strength of 36,000 PSI and excellent weldability. This heavy-gauge plate is ideal for manufacturing column base plates, heavy equipment mounting pads, gussets, and other demanding structural applications where strength and durability are critical. In stock for immediate Los Angeles pickup. Learn More

This 1/2" diameter 6061-T6 Aluminum Round Bar comes in a 144" length. Conforming to ASTM B211, it combines high strength (45,000 PSI tensile), excellent machinability, and superior corrosion resistance. This versatile, medium-diameter bar is ideal for producing machined parts, structural components, shafts, and custom brackets. In stock and available for same-day pickup in Los Angeles. Learn More

The Bobco Auto-Darkening Welding Helmet offers superior protection, meeting ANSI/ISEA Z87.1+ safety standards. Featuring a 3.67” x 1.70” viewing area and a lightweight 1.07lb polycarbonate body, it ensures comfort and clarity for professional fabrication and MRO tasks. Learn More

2" Nominal Pipe Size (NPS) Galvanized Steel Pipe, Schedule 40 wall, 21-foot length. Conforms to ASTM A53 Grade B with 60,000 PSI tensile strength. The hot-dip zinc coating provides excellent corrosion resistance for outdoor and high-moisture use. Ideal for plumbing mains, HVAC piping, handrails, and structural posts. In stock for same-day Los Angeles pickup. Learn More

Learn More

9-1/2" RUBBER BOOTS, H: 16" Learn More

1/2" diameter 304 Stainless Steel Round Bar in 144" lengths. This versatile, general-purpose stainless conforms to ASTM A276 specifications. It offers 73,200 PSI tensile strength, excellent corrosion resistance, and superior weldability. Ideal for medium-sized shafts, structural supports, food-grade equipment, and architectural applications. In stock for immediate Los Angeles pickup. Learn More

1-1/2" diameter 6061-T6 Aluminum Round Bar in a 144" length. This versatile alloy conforms to ASTM B211 and provides 45,000 PSI tensile strength, good machinability, and excellent corrosion resistance. The medium diameter is ideal for general-purpose structural components, shafts, axles, and custom machined parts. In stock and available for same-day pickup in Los Angeles. Learn More

1/2" diameter 1018 Cold Rolled Steel Round Bar, 144" length. Conforms to ASTM A108 with 63,800 PSI tensile strength and a smooth, scale-free finish. Known for its excellent machinability and tight dimensional tolerances, this medium-diameter bar is ideal for manufacturing shafts, axles, bushings, and other precision machined components. In stock for Los Angeles pickup. Learn More

A36 Hot Rolled Steel Round Bar with a 1/2" diameter and 240" length. This versatile, low-carbon steel conforms to ASTM A36 standards, offering a minimum yield strength of 36,000 PSI and excellent weldability for easy fabrication. Its medium diameter is ideal for shafts, axles, support bracing, and general repairs. Available for same-day pickup in Los Angeles. Learn More

1/2" NPS Schedule 40 Galvanized Steel Pipe in 21-foot lengths. Conforms to ASTM A53 Grade B with a 60,000 PSI tensile strength. The hot-dip zinc coating provides superior corrosion resistance for outdoor and high-moisture environments. This small diameter is ideal for plumbing, non-potable water lines, conduit, and residential handrails. In stock for same-day Los Angeles pickup. Learn More

1-1/4" wide by 1/4" thick 304 Stainless Steel Flat Bar, sold in 144" lengths. This austenitic chromium-nickel alloy complies with ASTM A276 and has a tensile strength of 73,200 PSI. It combines excellent weldability with remarkable corrosion resistance. Its medium size is ideal for structural bracing, equipment framework, and general fabrication projects. In stock for same-day Los Angeles pickup. Learn More

1/2" diameter Cold Rolled All Thread Rod, supplied in 120-inch lengths with a zinc plated finish for corrosion resistance. Conforming to the strength requirements of ASTM A307, this rod offers a tensile strength of 63,800 PSI. Its continuous threading provides maximum versatility for custom-length fasteners, anchoring systems, and structural bracing. In stock for same-day Los Angeles pickup. Learn More

1-1/2" diameter 304 Stainless Steel Round Bar in 144" lengths. This versatile austenitic stainless steel conforms to ASTM A276 and offers a tensile strength of 73,200 PSI. Its excellent corrosion resistance and weldability make it a standard for machined components, shafts, architectural elements, and food processing equipment. This medium-diameter bar is ideal for structural and mechanical applications. In stock for Los Angeles pickup. Learn More

This industrial-grade, oil-based DTM (Direct-to-Metal) paint offers a durable flat black finish. Engineered for superior adhesion and corrosion resistance consistent with MIL-SPEC performance criteria, it is ideal for protecting steel and iron surfaces in fabrication and MRO projects. Learn More

2-inch Nominal Pipe Size (NPS) 6063-T5 Aluminum Pipe with a Schedule 40 wall, in a 240-inch length. Conforms to ASTM B241 standards with 27,000 PSI tensile strength. Known as architectural aluminum, it offers excellent corrosion resistance and a superior surface finish, making it ideal for handrails, frames, and display fixtures. In stock for same-day Los Angeles pickup. Learn More

1-1/2" NPS Schedule 40 Galvanized Steel Pipe, sold in 21-foot (252") lengths. Conforming to ASTM A53 Grade B, this pipe provides a minimum 60,000 PSI tensile strength and superior corrosion resistance from its zinc coating. Its versatile size is ideal for plumbing mains, structural handrails, fence posts, and other outdoor applications requiring durability. In stock Los Angeles. Learn More

3-1/2 inch NPS Schedule 40 Galvanized Steel Pipe. Conforming to ASTM A53 Grade B, this pipe features a hot-dip zinc coating for superior corrosion resistance and 60,000 PSI tensile strength. Its durable, weather-resistant finish makes it ideal for outdoor structures, water lines, and safety barriers. Large diameter suitable for main water lines and structural columns. In stock for Los Angeles pickup. Learn More

2 inch Schedule 40 Hot Rolled Black Pipe. Conforms to ASTM A53 Grade B standards, offering 60,000 PSI tensile strength and excellent weldability for strong, reliable joints. This medium-sized pipe is ideal for plumbing mains, HVAC piping, fire sprinkler systems, and structural applications like handrails and support posts. In stock and ready for same-day pickup in Los Angeles. Learn More

The 3 Inch Post Ball Cap is a durable, decorative finial for fence posts and railings. Manufactured from high-strength Class 25-30 gray iron, it provides a classic architectural finish and protects the post top from weather. Ideal for both new fabrication and MRO projects. Learn More

1/2" diameter Cold Rolled Steel All Thread Rod with an oil finish, supplied in 120" lengths. Made from low-carbon steel, it meets the strength requirements of ASTM A307 Grade A and offers 63,800 PSI tensile strength. The continuous threading provides versatile fastening for construction, manufacturing, and general repair. In stock for Los Angeles pickup. Learn More

Durable 5/8 Inch Square Plastic Caps designed for a secure, press-fit on square tubing. Made from industrial-grade, weather-resistant plastic, these caps provide a clean, finished appearance while protecting against dirt, moisture, and sharp edges. Ideal for fencing, furniture, and equipment fabrication. Learn More

Our 12-inch industrial door spring is engineered from high-tensile spring steel for maximum durability and cycle life. Designed to meet ASTM A227/A228 performance standards, it provides reliable tension for heavy-duty commercial and industrial doors. Features a corrosion-resistant zinc-plated finish for long-lasting use. Learn More

1/2" NPS Schedule 40 Aluminum Pipe in 6063-T5 temper, available in 240" lengths. Conforming to ASTM B241, this architectural aluminum offers 27,000 PSI tensile strength, excellent corrosion resistance, and a superior surface finish ideal for anodizing. The small diameter is perfect for creating store fixtures, fluid lines, and decorative frameworks. In stock for same-day pickup in Los Angeles. Learn More

1/2 inch Nominal Pipe Size (NPS) Hot Rolled Black Pipe with a Schedule 40 wall. This product conforms to ASTM A53 Grade B specifications, providing 60,000 PSI tensile strength and excellent weldability. The small diameter is ideal for plumbing, natural gas lines, compressed air systems, and light structural applications like handrails. Standard uncoated 'black' finish. In stock for Los Angeles pickup. Learn More

Morse Metal Devil NXT

• 7-1/4" x 5/8"
• 5800 RPM
• 48 Teeth Metal
• Carbide Tipped Circular Saw Blade

Learn More

6063-T5 Aluminum Pipe with a 1-1/2 inch nominal size and standard Schedule 40 wall thickness. This seamless extruded pipe conforms to ASTM B241 specifications and offers 27,000 PSI tensile strength. Known as "architectural aluminum," its excellent corrosion resistance and superior surface finish make it ideal for handrails, frames, and furniture. In stock for immediate cutting and pickup in Los Angeles. Learn More

1-1/2 inch Nominal Pipe Size (NPS) Hot Rolled Black Pipe with a Schedule 40 wall thickness. Made from carbon steel conforming to ASTM A53 Grade B specifications, this pipe offers a minimum tensile strength of 60,000 PSI and excellent weldability. Its medium size is well-suited for plumbing mains, structural posts, handrails, and fire protection systems. In stock for immediate Los Angeles pickup. Learn More

3-1/2 inch Nominal Pipe Size (NPS), Schedule 40 Hot Rolled Black Pipe in a 252" (21 ft) length. This product conforms to ASTM A53 Grade B, offering 60,000 PSI tensile strength and excellent weldability. As a large diameter pipe, it is ideal for main water lines, industrial process piping, structural columns, and large-scale fabrication projects. In stock and available for same-day pickup in Los Angeles. Learn More

3/4" x 1/2" x 1/8" 6063-T5 Aluminum Channel, 144" length. Conforms to ASTM B308 and features 27,000 PSI tensile strength, excellent corrosion resistance, and a superior surface finish. Known as the architectural alloy, it's ideal for window frames and decorative trim. This small profile is perfect for intricate finish work and light framing. In stock for Los Angeles pickup. Learn More

The Hook Lock Double Cylinder provides robust security for commercial and industrial gates. Featuring a hardened steel hook bolt and dual-keyed access, this lock is engineered for high-traffic applications and enhanced access control, designed to meet key industry standards for durability and security. Learn More

Rubber Mallet

• Head L: 4-1/2"
• Face DIA: 3"
• Overall H: 14"

Learn More

Our 6x6 Heavy Duty Weldable Butt Hinges are engineered for maximum strength in demanding applications. Forged from high-quality, low-carbon weldable steel, these hinges provide a robust pivot point for heavy gates and industrial doors. The plain steel finish is ready for welding and custom coating. Learn More

Our 5-inch barrel hinges are engineered from high-strength carbon steel for maximum durability and load capacity. Designed for weld-on applications, these hinges provide a robust pivot point for heavy gates, doors, and industrial equipment. They feature a grease zerk fitting for easy maintenance and extended service life. Learn More

This 6" Cast Iron V-Groove Wheel is engineered for smooth operation on angle iron tracks. Made from industrial-grade Class 25-30 gray iron, it supports a heavy-duty load capacity of 500 lbs. Ideal for sliding gates, industrial doors, and material handling carts. Learn More

1/2" NPS Schedule 40 Stainless Steel Pipe, 240" length. This 304 stainless steel pipe conforms to ASTM A312 and has a tensile strength of 73,200 PSI. It combines excellent corrosion resistance and weldability, making it a standard for fluid and gas transport. The small diameter is ideal for instrumentation lines, conduit, and small-scale process piping. In stock for Los Angeles pickup. Learn More

This industrial-grade 0.8mm (.030") MIG welding wire is AWS/ASME certified for professional use. The steel alloy composition ensures a stable arc, low spatter, and consistent wire feed for high-quality welds in fabrication and repair applications. Packaged in a convenient 2.2 LBS (1 KG) spool. Learn More

Learn More

Our 3x3/4 Barrel Hinges are heavy-duty, weld-on hardware engineered for high-load applications. Constructed from durable, unfinished weldable steel, they provide a robust pivot point for heavy gates, doors, and custom fabrication projects. These industrial-grade hinges ensure smooth, reliable operation and are ready for welding and finishing. Learn More

Protect your hands with our industrial-grade Goat Leather Driving Gloves. These gloves are rated to ANSI/ISEA 105 standards, providing excellent dexterity and durability for material handling. The premium goat leather construction ensures a comfortable fit and reliable protection for MRO and fabrication tasks. Learn More

This 3/4 Inch Square Plastic Cap is designed for a secure fit on square tubing, providing a clean finish and protection. Made from durable, weather-resistant LDPE plastic, it is ideal for finishing fences, railings, and furniture. It meets general industrial quality standards for non-structural applications. Learn More

This 1 Inch Square Plastic Cap provides a durable, finished look for square tubing. Made from UV-resistant LDPE plastic, it protects against moisture and debris. Ideal for fencing, furniture, and fabrication projects. Learn More

Our 3x3 Heavy Duty Weldable Butt Hinges are engineered from high-strength, low-carbon steel for maximum durability. Designed for high-load applications, these hinges meet industrial fabrication standards (ANSI/BHMA A156.1 Grade 1) for reliable performance on heavy gates, doors, and equipment. Learn More

Engineered for strength and durability, these 5x5 Heavy Duty Weldable Butt Hinges are essential for industrial gates, doors, and custom fabrication. Made from high-quality, weldable low-carbon steel, they provide a secure and permanent pivot point. Ideal for heavy-duty applications requiring robust performance. Learn More

1" x 0.075" wall A500 Grade B Hot Rolled Steel Square Tube, sold in 20-foot lengths. Conforms to ASTM A500 with a minimum yield strength of 46,000 PSI and excellent weldability. This tube's high strength-to-weight ratio makes it ideal for structural frames, equipment bases, trailer manufacturing, and general fabrication projects where durability is critical. In stock for Los Angeles pickup. Learn More

1" x 1" A500B Hot Rolled Steel Square Tube with a 0.09" wall thickness, in 240" lengths. This structural tubing conforms to ASTM A500 Grade B and provides 58,000 PSI tensile strength. Its excellent weldability and high strength-to-weight ratio make it ideal for building frames, trailer manufacturing, and general fabrication. In stock for same-day Los Angeles pickup. Learn More

1" x 1" Hot Rolled Steel Square Tube with a 0.12" wall thickness, in 20-foot lengths. Manufactured to ASTM A500 Grade B specifications, this structural tubing offers a minimum yield strength of 46,000 PSI and excellent weldability. Its medium size is ideal for constructing durable equipment frames, structural supports, handrails, and general fabrication projects. In stock for same-day Los Angeles pickup. Learn More