Search results for: 'stainless steel square tube 304 1 2 inches x 065'

This 1" x 3/8" 6061-T6 Aluminum Flat Bar is a versatile, heat-treatable grade conforming to ASTM B211. It provides a high strength-to-weight ratio with 45,000 PSI tensile strength, good machinability, and excellent corrosion resistance. This medium-sized bar is ideal for structural bracing, machine ways, base plates, and custom fabricated parts. In stock for immediate Los Angeles pickup. Learn More

This 1" x 3/4" 6061-T6 Aluminum Flat Bar offers an excellent strength-to-weight ratio and good workability. Conforming to ASTM B211, it provides 45,000 PSI tensile strength, superior corrosion resistance, and excellent weldability. This medium-width bar is ideal for structural bracing, machine ways, support brackets, and general fabrication projects. In stock and available for same-day pickup in Los Angeles. Learn More

This 6" Cast Iron V-Groove Wheel is engineered for smooth operation on angle iron tracks. Made from industrial-grade Class 25-30 gray iron, it supports a heavy-duty load capacity of 500 lbs. Ideal for sliding gates, industrial doors, and material handling carts. Learn More

The Bobco Auto Darkening Weld Helmet provides superior protection, meeting ANSI/ISEA Z87.1+ standards for impact resistance. It features a large 3.94” x 3.15” viewing area for maximum visibility and is constructed from a lightweight, durable high-impact resistant material. Learn More

1-1/4" diameter 6061-T6 Aluminum Round Bar, 144" length. Conforms to ASTM B211 with a 45,000 PSI tensile strength. This grade combines excellent machinability, weldability, and corrosion resistance. Its medium diameter is ideal for shafts, axles, spacers, and general machined components requiring a balance of strength and workability. In stock for Los Angeles pickup. Learn More

A 5/8" x 1/8" 6061-T6 Aluminum Flat Bar in a 144" length. This product conforms to ASTM B211 standards, offering a versatile combination of high strength (45,000 PSI tensile), excellent corrosion resistance, and good machinability. Its small cross-section is ideal for manufacturing lightweight brackets, mounting straps, shims, and custom fabrication projects. In stock for Los Angeles pickup. Learn More

This 1/4" x 3/4" 6061-T6 Aluminum Flat Bar is a versatile, heat-treatable grade conforming to ASTM B211. It combines high strength (45,000 PSI tensile) with excellent weldability, machinability, and corrosion resistance. This small-width profile is ideal for fabricating custom brackets, support straps, base plates, and mounting blocks for machinery and structural projects. In stock and available for same-day pickup in Los Angeles. Learn More

A 4" wide by 1/8" thick 1018 Cold Rolled Steel Flat Bar, supplied in a 144" length. This bar meets ASTM A108 standards and features 63,800 PSI tensile strength, tight dimensional tolerances, and good weldability. The cold drawn finish provides a smooth, scale-free surface ideal for machining. Its large width makes it suitable for base plates, structural supports, and die components. In stock Los Angeles. Learn More

5" x 1/8" 1018 Cold Rolled Flat Bar, 144" length. Conforming to ASTM A108, this low-carbon steel offers a smooth, scale-free finish and tight dimensional tolerances. It has a tensile strength of 63,800 PSI and excellent machinability. The wide 5-inch profile is ideal for base plates, heavy structural bracing, and die components. In stock for Los Angeles pickup. Learn More

1" x 3/16" 1018 Cold Rolled Steel Flat Bar, 144" length. Conforms to ASTM A108, delivering 63,800 PSI tensile strength and a smooth, scale-free finish. Known for excellent machinability and weldability, this medium-width bar is a versatile choice for fabricating brackets, machine ways, and structural bracing. In stock for immediate Los Angeles pickup. Learn More

3" x 1/4" Cold Rolled Flat Bar in 1018 steel, 144" length. Conforms to ASTM A108 with 63,800 PSI tensile strength and excellent machinability. Its smooth, scale-free surface and tight tolerances make it ideal for fabrication. This medium-width bar is perfect for structural bracing, machine ways, and wear strips. In stock for same-day Los Angeles pickup. Learn More

4" x 1/4" Cold Rolled Flat Bar, 144" length, made from 1018 low-carbon steel. Conforms to ASTM A108 standards, offering 63,800 PSI tensile strength, tight dimensional tolerances, and a smooth, scale-free finish. Its excellent machinability and weldability make it a reliable choice. The large width is ideal for base plates, heavy structural components, and machine frames. In stock for same-day Los Angeles pickup. Learn More

6" x 1/4" 1018 Cold Rolled Steel Flat Bar, 144" length. Conforms to ASTM A108 with 63,800 PSI tensile strength and a smooth, scale-free finish. This large flat bar offers tight dimensional tolerances and excellent machinability, making it ideal for base plates, heavy structural components, and die components where precision is critical. In stock for Los Angeles pickup. Learn More

1" x 3/8" 1018 Cold Rolled Steel Flat Bar, 144" length. Conforms to ASTM A108 with 63,800 PSI tensile strength and excellent machinability. The cold drawing process provides a smooth, scale-free surface and tight dimensional tolerances. Ideal for base plates, mounting brackets, and machine components requiring precision without extensive finishing. In stock for Los Angeles pickup. Learn More

1018 Cold Rolled Steel Flat Bar, measuring 1" wide by 3/4" thick in a 144" length. Conforms to ASTM A108 and offers 63,800 PSI tensile strength. The cold drawn process provides tight dimensional tolerances and a clean, smooth surface ideal for machining and welding. Excellent for fabricating brackets, base plates, and machine components. In stock Los Angeles. Learn More

The Bobco Auto-Darkening Welding Helmet offers superior protection, meeting ANSI/ISEA Z87.1+ safety standards. Featuring a 3.67” x 1.70” viewing area and a lightweight 1.07lb polycarbonate body, it ensures comfort and clarity for professional fabrication and MRO tasks. Learn More

1-1/4" diameter 1018 Cold Rolled Round Bar, 144" length. Conforming to ASTM A108, this general-purpose steel has 63,800 PSI tensile strength and excellent machinability. The cold drawn process provides a smooth, scale-free finish and tight dimensional tolerances, making it ideal for shafts, axles, and precision machined components. In stock for Los Angeles pickup. Learn More

1/8" x 3/4" 1018 Cold Rolled Flat Bar, 144" length. Conforms to ASTM A108 with a tensile strength of 63,800 PSI. This grade offers excellent machinability and a smooth, scale-free surface due to the cold drawing process. Ideal for manufacturing small brackets, mounting straps, shims, and precision frame components. In stock for Los Angeles pickup. Learn More

1/4" x 5/8" 1018 Cold Rolled Steel Flat Bar, 144" length. Conforms to ASTM A108 with a tensile strength of 63,800 PSI and excellent machinability. The cold drawing process provides a smooth, scale-free surface and tight dimensional tolerances. This small-width bar is ideal for brackets, straps, shims, and precision-machined components. In stock for immediate Los Angeles pickup. Learn More

3/4" x 1/4" Cold Rolled Flat Bar in 1018 grade steel, sold in 144" lengths. Conforms to ASTM A108 with 63,800 PSI tensile strength and excellent machinability. The cold drawing process provides tight dimensional tolerances and a smooth, scale-free surface. This small-profile bar is ideal for manufacturing precision brackets, straps, and small machine components. In stock for same-day Los Angeles pickup. Learn More

Enhance perimeter security with our CBT-65 Steel Razor Wire. This 50-foot coil is made from high-tensile galvanized steel for maximum durability and corrosion resistance, manufactured to meet demanding industrial security standards. It serves as a superior alternative to standard barbed wire for high-security applications. Learn More

3" NPS Schedule 40 Galvanized Steel Pipe, sold in 21 ft lengths. Conforms to ASTM A53 Grade B with a 60,000 PSI tensile strength. The hot-dip zinc coating provides excellent corrosion resistance for outdoor and high-moisture environments. This large diameter pipe is ideal for main water lines, industrial process piping, structural columns, and protective barriers. In stock for same-day Los Angeles pickup. Learn More

4" NPS Schedule 40 Galvanized Steel Pipe, sold in 21-foot lengths. Conforming to ASTM A53 Grade B, this pipe has a 60,000 PSI tensile strength and a hot-dip zinc coating for superior corrosion resistance. Its large diameter is ideal for main water lines, industrial process piping, and structural columns. In stock for same-day Los Angeles pickup. Learn More

5 inch Nominal Pipe Size (NPS) Galvanized Steel Pipe with a Schedule 40 wall thickness (0.258"), available in 21 ft lengths. Conforms to ASTM A53 Grade B with 60,000 PSI tensile strength. The hot-dip zinc coating provides superior corrosion resistance for outdoor and high-moisture use. This large diameter pipe is ideal for structural columns, main water lines, and industrial process piping. In stock for Los Angeles pickup. Learn More

6-inch Nominal Pipe Size (NPS) Schedule 40 Galvanized Pipe, 252-inch length. Conforms to ASTM A53 Grade B, delivering 60,000 PSI tensile strength and excellent weldability. The hot-dip zinc coating provides superior corrosion resistance for outdoor and high-moisture environments. Large diameter is ideal for main water lines, industrial process piping, and heavy structural columns. In stock Los Angeles. Learn More

Our Industrial-Grade Gloss Black DTM Paint is a high-performance alkyd coating designed for direct application on metal. It provides excellent corrosion resistance and a durable, high-gloss finish suitable for demanding fabrication and MRO environments. Learn More

1-1/4" NPS, Schedule 10 Hot Rolled Black Pipe manufactured to ASTM A53 Grade B specifications. This carbon steel pipe offers 60,000 PSI tensile strength and excellent weldability. The medium diameter is ideal for plumbing mains, HVAC piping, handrails, and other structural applications. The uncoated black finish is suitable for indoor use or applications requiring a custom coating. In stock for Los Angeles pickup. Learn More

1-1/4 inch Nominal Pipe Size (NPS), Schedule 40 Hot Rolled Black Pipe in a 21 ft length. Manufactured to ASTM A53 Grade B standards, this carbon steel pipe offers 60,000 PSI tensile strength and excellent weldability. The medium diameter is ideal for plumbing mains, fire sprinkler systems, and structural applications. In stock for Los Angeles pickup. Learn More

1" thick A36 Hot Rolled Steel Plate, 48" x 120". Conforms to ASTM A36 with 36,000 PSI minimum yield strength. This structural plate offers excellent weldability and good machinability. Its large thickness makes it ideal for heavy-duty applications like column base plates, heavy equipment mounting, wear plates, and general fabrication projects requiring robust support. In stock and ready for custom cutting or pickup in Los Angeles. Learn More

1-1/4" NPS Schedule 40 pipe manufactured from 6063-T5 aluminum alloy. This architectural aluminum conforms to ASTM B241 and offers 27,000 PSI tensile strength. Known for its superior surface finish, excellent corrosion resistance, and good workability, it is ideal for handrails, frames, and furniture. This medium-sized pipe provides a balance of strength and weight. In stock for Los Angeles pickup. Learn More

1/4" x 48" x 120" A36 Hot Rolled Steel Plate, compliant with ASTM A36 standards. This structural plate offers a guaranteed minimum yield strength of 36,000 PSI, excellent weldability, and good formability. Its medium thickness is ideal for structural panels, machinery guards, gussets, and general fabrication projects where strength and economy are key. In stock for same-day Los Angeles pickup. Learn More

3/4" x 3/4" x 1/8" 6063-T5 Aluminum Channel, conforming to ASTM B308. This architectural alloy offers 27,000 PSI tensile strength, excellent corrosion resistance, and a superior surface finish ideal for anodizing. Its small profile is perfect for applications like window frames, decorative trim, railing components, and lightweight structural supports. In stock for Los Angeles pickup. Learn More

This Safety Yellow industrial coating features advanced Direct-to-Metal (DTM) oil-based alkyd technology for superior adhesion and corrosion protection. It provides a durable, high-visibility finish ideal for MRO and equipment applications, meeting industrial performance benchmarks. Learn More

3/4 inch Nominal Pipe Size (NPS) Schedule 40 Galvanized Steel Pipe, 21 ft length. Manufactured to ASTM A53 Grade B specifications, this pipe offers a minimum tensile strength of 60,000 PSI and superior corrosion resistance from its hot-dip zinc coating. Ideal for outdoor structures, non-potable water plumbing, handrails, and fencing. In stock and available for same-day pickup in Los Angeles. Learn More

Our Pacific Brown industrial-grade paint features advanced Direct-to-Metal (DTM) technology for superior corrosion protection. This durable alkyd coating is engineered for single-coat application on prepared metal surfaces, ideal for demanding MRO and fabrication projects. Learn More

1-3/8" diameter 6061-T6 Aluminum Round Bar, 144" length. This versatile alloy conforms to ASTM B211 and provides 45,000 PSI tensile strength, good machinability, and excellent corrosion resistance. Its medium diameter is ideal for shafts, axles, structural components, and custom machined parts requiring a high strength-to-weight ratio. In stock for same-day Los Angeles pickup. Learn More

1" diameter 6061-T6 Aluminum Round Bar, 144" length. This versatile bar meets ASTM B211 standards and provides 45,000 PSI tensile strength, good machinability, and excellent corrosion resistance. Its medium diameter is ideal for shafts, axles, structural components, and custom machined parts. In stock for same-day cutting and pickup in Los Angeles. Learn More

1 Inch Schedule 40 Hot Rolled Black Pipe, sold in 21-foot lengths. Manufactured to ASTM A53 Grade B standards, it offers 60,000 PSI tensile strength and excellent weldability. This medium-sized pipe is ideal for natural gas lines, fire sprinkler systems, scaffolding, and general structural fabrication. An economical choice for fluid conveyance and support applications. In stock for Los Angeles pickup. Learn More

1 inch 1018 Cold Rolled Steel Hexagon Bar, 144-inch length. Conforms to ASTM A108 standards, delivering 63,800 PSI tensile strength and excellent machinability. Its smooth finish and tight tolerances make it ideal for fasteners, nuts, hydraulic fittings, and machined components requiring a hex shape for gripping. In stock for same-day Los Angeles pickup. Learn More

This high-performance 0.8mm (.030") MIG welding wire is engineered for superior results in fabrication and repair. AWS/ASME certified, it ensures strong, consistent welds on mild and carbon steels. Packaged in convenient 11 LBS (1KG) spools for project efficiency. Learn More

The Super Tool Press Pliers 10" are engineered from high-strength forged alloy steel for superior gripping power and durability. Designed to meet ASME B107 standards, these industrial-grade pliers are essential for demanding fabrication and MRO tasks. Learn More

1-7/8" diameter 1018 Cold Rolled Round Bar, 144" length. Conforms to ASTM A108 with 53,700 PSI yield strength and excellent machinability. The cold drawn process provides a smooth finish and tight dimensional tolerances. This medium-diameter bar is ideal for manufacturing shafts, axles, pins, and various machined components requiring strength and precision. In stock for Los Angeles pickup. Learn More

1/8 inch diameter 6061-T6 Aluminum Round Bar, 144 inches long. This versatile alloy conforms to ASTM B211 and features 45,000 PSI tensile strength, excellent machinability, and superior corrosion resistance. Its small diameter is perfect for producing pins, dowels, small shafts, and other precision turned parts requiring high strength and a good surface finish. In stock for same-day pickup in Los Angeles. Learn More

1/4" diameter 6061-T6 Aluminum Round Bar in 144" lengths. This versatile, heat-treated alloy conforms to ASTM B211 and offers 45,000 PSI tensile strength, excellent machinability, and superior corrosion resistance. Its small diameter is perfectly suited for manufacturing pins, dowels, small shafts, and precision turned components. Ready for same-day cutting and pickup in Los Angeles. Learn More

1" diameter 1018 Cold Rolled Steel Round Bar, 144" length. Conforming to ASTM A108, this bar has a tensile strength of 63,800 PSI and excellent machinability. Its smooth, scale-free surface and tight dimensional tolerances make it ideal for shafts, axles, pins, and custom machined parts requiring precision. In stock Los Angeles. Learn More

1-inch diameter Cold Rolled All Thread Rod in a 120-inch length with a zinc plated finish. This rod meets ASTM A307 Grade A strength requirements, with a base material tensile strength of 63,800 PSI. The zinc plating provides good corrosion resistance for general-purpose fastening, anchoring systems, and suspending HVAC fixtures. In stock for immediate Los Angeles pickup. Learn More

1/8" thick Hot Rolled Steel Diamond Plate, available in 48" x 120" sheets. Made from durable A36 steel and conforming to ASTM A786 for pattern and skid resistance. This plate offers excellent weldability and strength, making it ideal for high-traffic applications like industrial flooring, ramps, stair treads, and truck bed liners. Its raised pattern provides multi-directional grip. In stock for Los Angeles pickup. Learn More

1/4" Hot Rolled Diamond Plate (Tread Plate) made from A36 structural steel. This sheet measures 48" x 120" and conforms to ASTM A786 and A36 standards. It features a raised pattern for maximum skid resistance, excellent weldability, and a minimum tensile strength of 58,000 PSI. Ideal for industrial flooring, ramps, and truck beds. In stock Los Angeles. Learn More

1/8" diameter 1018 Cold Rolled Steel Round Bar, 144" length. Conforms to ASTM A108 with a tensile strength of 63,800 PSI. The cold drawn process provides a smooth, scale-free finish and tight dimensional tolerances. This small diameter is ideal for manufacturing precision pins, dowels, fastener blanks, and small shafts. In stock for Los Angeles pickup. Learn More

1/4" diameter 1018 Cold Rolled Round Bar, 144" length. Conforms to ASTM A108 with 63,800 PSI tensile strength and excellent machinability. This cold drawn bar has tight tolerances and a smooth finish, ideal for small shafts, pins, dowels, and fastener blanks. In stock for Los Angeles pickup. Learn More

1" diameter Cold Rolled All Thread Rod in 120" (10 ft) lengths. Made from 1018 steel with an oil finish for rust prevention, this rod meets ASTM A307 Grade A strength requirements with a 60,000 PSI tensile strength. The continuous threading provides versatile fastening for construction, manufacturing, and general repair. Easily cut to custom lengths. In stock for Los Angeles pickup. Learn More

1/4 inch diameter Cold Rolled All Thread Rod with a zinc plated finish for corrosion resistance. Continuous threading along its 120-inch length provides versatile fastening. Made from low-carbon steel conforming to ASTM A307 strength requirements, it offers 63,800 PSI tensile strength. Ideal for light-duty bracing, suspending conduit, and creating custom-length fasteners. In stock for same-day Los Angeles pickup. Learn More

1" NPS Schedule 40 Aluminum Pipe, manufactured from 6063-T5 aluminum alloy. Conforming to ASTM B241, this pipe offers excellent corrosion resistance and a superior surface finish ideal for anodizing. With a tensile strength of 27,000 PSI, it provides a great balance of strength and workability for architectural applications like handrails, frames, and trim. In stock for Los Angeles pickup. Learn More

This industrial-grade, oil-based black primer is engineered for direct-to-metal (DTM) applications, providing a durable foundation for topcoats. Its robust alkyd formulation ensures excellent adhesion and superior corrosion resistance for fabrication and MRO projects. Learn More

Our industrial-grade DTM Clear Coat is a high-performance alkyd coating designed for direct application on metal surfaces. It provides exceptional corrosion resistance and a durable, transparent finish ideal for MRO and fabrication projects. Learn More

EAGLE 2000 FR (1HP) (FOOT RELEASE) SLIDE GATE OPERATOR Learn More

Our Spring Loaded Wheel with 3 Casters is an industrial-grade solution for material handling equipment. Engineered to support dynamic load ratings from 200 to 2000 lbs, it provides superior shock absorption and smooth mobility for carts, racks, and dollies. The durable steel construction ensures reliability in demanding warehouse and fabrication environments. Learn More

This industrial-grade 0.8mm (.030") MIG welding wire is supplied on 33 LBS spools. Manufactured to meet or exceed AWS/ASME certification standards, it ensures consistent performance for professional fabrication and repair on mild and low-alloy steels. Learn More

Learn More

Our industrial-grade, oil-based white primer is an alkyd formulation designed for superior adhesion on metal surfaces. It provides an excellent foundation for topcoats, ensuring long-lasting corrosion protection for fabrication and MRO projects. Ideal for direct-to-metal (DTM) surface preparation. Learn More

Industrial-grade Razor Wire Clips sold in convenient 25-packs. Made from heavy-duty galvanized steel for superior corrosion resistance and high tensile strength. Essential hardware for securing concertina and razor wire in high-security fence installations. Learn More

Industrial-grade Acetone is a powerful, fast-evaporating solvent designed for cleaning and degreasing metal surfaces. It effectively removes oils, grease, and contaminants, ensuring optimal surface preparation for painting or welding. Conforms to industrial purity standards like ASTM D329. Learn More

A 0.032" thick, 48" x 120" sheet of 3003-H14 aluminum. Conforms to ASTM B209, offering a balance of moderate strength (22,000 PSI tensile) and excellent formability. This thin gauge is lightweight, weldable, and corrosion-resistant, making it ideal for HVAC ductwork, electronic enclosures, formed brackets, and decorative panels. In stock Los Angeles. Learn More

3003-H14 Aluminum Sheet, 0.0604" thick, 48" wide, and 120" long. This versatile alloy conforms to ASTM B209 and offers an excellent combination of moderate strength (22,000 PSI tensile), high ductility, and superior corrosion resistance. Its excellent formability makes it a top choice for general sheet metal work, HVAC ducting, fan blades, and automotive panels. In stock for immediate pickup in Los Angeles. Learn More

0.063" x 48" x 96" (4x8) sheet of 3003-H14 Aluminum. This versatile alloy meets ASTM B209 standards and provides an excellent combination of moderate strength (22,000 PSI tensile), high ductility, and superior corrosion resistance. Its excellent formability makes it ideal for general sheet metal work, HVAC ductwork, fuel tanks, and fan blades. In stock for immediate Los Angeles pickup. Learn More

0.125" x 48" x 120" 3003-H14 Aluminum Sheet. This versatile sheet conforms to ASTM B209, offering excellent formability, weldability, and good corrosion resistance. With a tensile strength of 22,000 PSI, this medium-thickness sheet is ideal for structural panels, machine guards, trailer siding, and general sheet metal fabrication. In stock for same-day cutting and pickup in Los Angeles. Learn More

0.080" thick 6061-T6 Aluminum Sheet, 48" x 144". This versatile sheet conforms to ASTM B209, offering 45,000 PSI tensile strength, good machinability, and excellent corrosion resistance. The T6 temper provides optimal strength for structural applications. This medium-thickness sheet is ideal for structural panels, machine guards, base plates, and vehicle body panels. In stock and ready for same-day cutting and pickup in Los Angeles. Learn More

This 3/32" 6013 all-purpose welding rod is an AWS/ASME certified electrode ideal for general fabrication. Designed for a stable arc on AC/DC, it delivers smooth beads on mild steel. A versatile choice for MRO and light structural work. Learn More

Our industrial-grade Black Nitrile Disposable Gloves offer superior puncture and chemical resistance. These powder-free gloves are ANSI/ISEA 105 rated for reliable hand protection in demanding MRO, fabrication, and general-purpose applications. Packaged in a convenient 100-piece box. Learn More

#4 (1/2") Grade 60 Hot Rolled Rebar, 20-foot length. Conforms to ASTM A615 with a minimum yield strength of 60,000 PSI. The deformed surface provides a superior mechanical bond with concrete, making it essential for reinforcing foundations, slabs, and columns. This medium-diameter bar offers a standard balance of strength and ductility for structural applications. In stock for Los Angeles pickup. Learn More

Learn More

Durable 14" brown leather welding gloves engineered for high-heat protection. These industrial-grade gloves meet ANSI/ISEA 105 standards for cut and abrasion resistance, making them ideal for professional welding and fabrication. Learn More

This industrial-grade HP Air Spray Gun features a durable aluminum body, a 1.88mm nozzle, and a 1000cc aluminum cup. Engineered for high-volume application, it provides excellent atomization for industrial primers, topcoats, and DTM coatings meeting MIL-SPEC performance criteria. Learn More

3/16" x 3" 6061-T6 Aluminum Flat Bar, 144" length. Conforms to ASTM B211, this versatile alloy offers 45,000 PSI tensile strength, excellent weldability, and good machinability. Its high strength-to-weight ratio and corrosion resistance make it ideal for structural frames, support braces, and base plates. This medium-width bar is a fundamental building block for fabrication projects. In stock for same-day Los Angeles pickup. Learn More

4" x 3/16" 6061-T6 Aluminum Flat Bar, 144" length. Conforms to ASTM B211, offering a combination of high strength (45,000 PSI tensile), good machinability, and excellent corrosion resistance. This large-width bar is ideal for structural applications, including base plates, heavy equipment mounting, and die components. Ready for same-day cutting and pickup in Los Angeles. Learn More

3/8" x 3" 6061-T6 Aluminum Flat Bar, 144" length. This versatile, heat-treatable grade conforms to ASTM B211 and provides 45,000 PSI tensile strength. It combines good machinability, excellent weldability, and superior corrosion resistance. Ideal for structural frames, support braces, base plates, and custom machined parts. In stock for same-day pickup in Los Angeles. Learn More

4" x 3/8" 6061-T6 Aluminum Flat Bar, 144" length. Conforming to ASTM B211, this alloy offers a versatile combination of 45,000 PSI tensile strength, good machinability, and excellent weldability. Its high strength-to-weight ratio and corrosion resistance make it ideal for demanding applications. This large width is perfect for structural frames, base plates, and heavy-duty brackets. In stock for same-day Los Angeles pickup. Learn More

This 3" x 5/8" 6061-T6 Aluminum Flat Bar offers an excellent combination of strength, workability, and corrosion resistance. Conforming to ASTM B211 with a tensile strength of 45,000 PSI, this material is easily machined, welded, and finished. Its medium size is ideal for structural bracing, machine ways, wear strips, and mounting plates where a high strength-to-weight ratio is required. In stock for immediate Los Angeles pickup. Learn More

3/8" x 3/4" 6061-T6 Aluminum Flat Bar, sold in 144" lengths. Conforms to ASTM B211 standards, delivering 45,000 PSI tensile strength with good machinability and excellent weldability. This small-width bar is ideal for manufacturing brackets, straps, shims, and small frame components where a high strength-to-weight ratio is essential. In stock for same-day Los Angeles pickup. Learn More

3/16" x 3" 1018 Cold Rolled Steel Flat Bar, 144" length. Conforms to ASTM A108 with 63,800 PSI tensile strength, superior dimensional tolerance, and a clean, smooth surface. It offers a good balance of strength, weldability, and excellent machinability. This medium-width bar is ideal for structural bracing, machine ways, and base plates. In stock for Los Angeles pickup. Learn More

A 3/16" x 4" Cold Rolled 1018 Steel Flat Bar, 144 inches long. Produced to ASTM A108 standards, this bar provides a tensile strength of 63,800 PSI, tight dimensional tolerances, and excellent machinability. The smooth, scale-free surface is ideal for applications requiring a clean finish. Suitable for base plates, structural components, and machine parts. In stock Los Angeles. Learn More

This 1018 Cold Rolled Flat Bar measures 6 inches wide by 3/16 inch thick, in a 144-inch length. Conforming to ASTM A108, it provides a smooth, scale-free surface, tight dimensional tolerances, and excellent machinability. Its 63,800 PSI tensile strength makes it ideal for manufacturing base plates, heavy structural bracing, and die components. In stock for same-day Los Angeles pickup. Learn More

3/8" x 3" 1018 Cold Rolled Flat Bar, 144" length. Conforms to ASTM A108 specifications with 63,800 PSI tensile strength and a clean, scale-free surface. Its excellent machinability and tight dimensional tolerances make it a reliable choice for manufacturing. This medium-width bar is ideal for structural bracing, base plates, and machine components. In stock for Los Angeles pickup. Learn More

4" x 3/8" 1018 Cold Rolled Steel Flat Bar in a 144" length. This bar meets ASTM A108 standards, providing 63,800 PSI tensile strength, a smooth scale-free finish, and tight dimensional tolerances. Its large width makes it ideal for base plates, heavy structural bracing, and die components where precision and strength are required. In stock and available for same-day pickup in Los Angeles. Learn More

This 6 inch by 3/8 inch 1018 Cold Rolled Steel Flat Bar offers tight dimensional tolerances and a smooth, scale-free surface. Conforming to ASTM A108, it has a tensile strength of 63,800 PSI and excellent machinability. Its large width makes it ideal for base plates, structural gussets, and heavy equipment mounting. In stock for Los Angeles pickup. Learn More

3" x 5/8" 1018 Cold Rolled Steel Flat Bar, 144" length. Conforms to ASTM A108 with 63,800 PSI tensile strength, excellent machinability, and superior dimensional tolerances. Its smooth, scale-free surface is ideal for painting or plating. This medium-width bar is used for structural bracing, machine ways, and base plates. In stock for same-day Los Angeles pickup. Learn More

3" x 3/4" 1018 Cold Rolled Steel Flat Bar, 144" length. Conforms to ASTM A108. Features a smooth, scale-free surface, tight tolerances, and excellent machinability. With 63,800 PSI tensile strength, it's ideal for base plates, brackets, and fixtures. This medium-width bar provides robust structural support for fabrication and machinery projects. In stock Los Angeles. Learn More

3/16" x 3/4" Cold Rolled 1018 Steel Flat Bar, 144" length. Conforming to ASTM A108, this bar has a clean, scale-free surface, tight dimensional tolerances, and 63,800 PSI tensile strength. Its excellent machinability and good weldability make it a versatile choice for fabricating custom brackets, straps, and base plates. In stock Los Angeles. Learn More

3/4" x 5/16" 1018 Cold Rolled Steel Flat Bar, 144" length. Conforms to ASTM A108, providing 63,800 PSI tensile strength, a smooth surface finish, and tight dimensional tolerances. This grade offers good machinability and weldability. Its small profile is ideal for manufacturing precision brackets, straps, shims, and small frame components. In stock for Los Angeles pickup. Learn More

3/4" x 3/8" 1018 Cold Rolled Flat Bar, 144" length. Conforms to ASTM A108 with 63,800 PSI tensile strength. The cold drawing process provides a smooth, scale-free finish and tight dimensional tolerances, making it excellent for machining and welding. This small size is ideal for making brackets, straps, shims, and small frame stock. In stock for Los Angeles pickup. Learn More

The Bobco Welding Machine MMA 160 is a portable, high-performance stick welder designed for industrial use. It delivers a stable 160-amp arc, ideal for use with AWS/ASME certified electrodes like 6010, 6013, and 7018. Its durable construction ensures reliability for both fabrication and MRO projects. Learn More

This high-quality 0.9mm (0.035") MIG welding wire is designed for superior performance in industrial applications. Certified to meet AWS/ASME standards, this steel alloy wire provides a stable arc and minimal spatter for clean, strong welds. Ideal for fabrication, automotive repair, and MRO projects. Learn More

These 10" off-white gloves are crafted from soft, durable goat leather for excellent dexterity and tactile sensitivity. They are ANSI/ISEA 105 rated, making them ideal for general handling, assembly, and MRO tasks requiring reliable hand protection. Learn More

A versatile, industrial-grade lacquer thinner for reducing paint viscosity and cleaning metal surfaces. This fast-evaporating solvent ensures optimal paint flow and prepares substrates for DTM coatings. Ideal for use with alkyd and oil-based industrial paints. Learn More

This industrial-grade 0.9mm (.035) MIG welding wire is engineered for high-performance fabrication and repair. Certified to meet AWS/ASME standards, it provides a stable arc and minimal spatter for clean, strong welds on various steel types. Available in an 11 LBS (1KG) spool. Learn More

This 0.9mm (.035") flux core welding wire is engineered for high-performance welding without external shielding gas. It meets AWS/ASME certification standards, providing reliable, strong welds for various steel fabrication projects. Packaged in a convenient 2.2 LBS (1KG) spool for portability and ease of use. Learn More

This industrial-grade 0.8mm (.030") flux core welding wire is engineered for high-performance fabrication and repair. Meeting AWS/ASME certification standards, it provides a stable arc and excellent bead appearance for general-purpose steel welding. Packaged in a convenient 11 lbs (1kg) spool. Learn More

These superior performance work gloves feature a durable nitrile coating for enhanced grip and protection. Rated to ANSI/ISEA 105 standards, they are designed for demanding industrial applications, providing both dexterity and durability for material handling and assembly. Learn More

A36 Hot Rolled Steel Channel, size C3 x 4.1 (3" Height x 1.41" Flange). Conforms to ASTM A36 with a minimum yield strength of 36,000 PSI. This structural C-channel offers excellent weldability and good machinability, making it ideal for equipment frames, vehicle chassis, structural supports, and general fabrication projects. In stock Los Angeles. Learn More

A36 Hot Rolled Steel Channel, size C3 x 5.0 (3" Height, 5.0 lbs/ft), in 240" lengths. Conforming to ASTM A36, this structural channel offers a minimum yield strength of 36,000 PSI and excellent weldability. Its C-shaped profile provides good structural support for frames, braces, and trailer components. In stock for immediate Los Angeles pickup. Learn More