Search results for: 'clip rolled round 1018 1 2 inch'

Size 9-1/2 industrial rubber boots with a 16" height for maximum coverage. Built for demanding job site conditions, these waterproof boots offer reliable protection against water, mud, and debris. The durable rubber construction and treaded, slip-resistant sole provide safety and comfort for fabricators, construction workers, and maintenance personnel. In stock for Los Angeles pickup. Learn More

This 4-1/2" x .040" x 7/8" cut-off wheel is an industrial-grade abrasive engineered for high-speed cutting. It is ANSI B7.1 compliant and features fiberglass reinforcement for enhanced safety and durability during metal fabrication and MRO tasks. Learn More

This 5-inch tube ring is crafted from high-quality Class 25-30 gray cast iron, providing excellent durability for ornamental and architectural applications. Designed for seamless integration with standard tubing for fences, gates, and handrails. Learn More

1/2" x 0.065" wall 304 Stainless Steel Square Tube, sold in 20-foot (240") lengths. Conforms to ASTM A269 with a 73,200 PSI tensile strength. This grade offers an excellent balance of corrosion resistance and weldability. The 180 grit satin finish provides a clean, decorative appearance ideal for architectural railings, frames, and trim. In stock for immediate Los Angeles pickup. Learn More

A 1/2" x 4" Hex Lag Screw featuring a protective zinc plating per ASTM B633. Manufactured from low carbon steel compliant with ASTM A307 standards for reliable performance in light-duty framing and construction. Learn More

This 1/2" x 3" Hex Lag Screw features a zinc-plated finish for moderate corrosion resistance. Manufactured from low carbon steel to meet ASTM A307 standards, it provides reliable holding power for wood construction and framing applications. Learn More

Protect high-traffic areas with our durable 16-gauge Galvanized Steel Corner Guard. Featuring a G90 galvanized coating for superior corrosion resistance, this 2" x 2" x 36" guard provides robust impact protection for commercial and industrial walls. Learn More

2" x 2" x 3/16" 6063-T5 Aluminum Angle, 144" length. Conforms to ASTM B308 with 27,000 PSI tensile strength. Known as 'architectural aluminum,' it offers a superior surface finish, excellent corrosion resistance, and good weldability. This medium-sized profile is ideal for structural framing, equipment bases, railings, and custom architectural fabrication. In stock for same-day pickup in Los Angeles. Learn More

3/4" NPS Schedule 40 Hot Rolled Black Pipe, available in 21 ft lengths. Conforms to ASTM A53 Grade B, with a minimum tensile strength of 60,000 PSI. This pipe offers excellent weldability and is a versatile, economical choice for fluid/gas transfer and structural uses like handrails. The 'black' finish is a result of the hot rolling process. In stock for immediate Los Angeles pickup. Learn More

A36 Hot Rolled Steel Angle measuring 4" x 3" legs with a 3/8" thickness. Conforming to ASTM A36, this angle iron offers a minimum yield strength of 36,000 PSI and excellent weldability for robust joints. Its large size is ideal for heavy structural applications, building frames, industrial supports, and equipment manufacturing. In stock for immediate cutting and pickup in Los Angeles. Learn More

5" x 5" x 3/8" A36 Hot Rolled Steel Angle, sold in a 240" (20 ft) length. This structural angle conforms to ASTM A36 and provides a minimum yield strength of 36,000 PSI. Its large dimensions make it ideal for heavy structural applications, including building frames and industrial supports. A36 steel offers excellent weldability and fabrication characteristics. In stock for same-day Los Angeles pickup. Learn More

3" Nominal Pipe Size (NPS) Hot Rolled Black Pipe with a Schedule 40 wall. Conforming to ASTM A53 Grade B, this carbon steel pipe offers 60,000 PSI tensile strength and excellent weldability for fabrication. Its large diameter is suited for main fluid lines, industrial process piping, and structural applications like columns and heavy supports. In stock for Los Angeles pickup. Learn More

4" x 3" x 0.250" wall Hot Rolled Steel Rectangular Tube. This structural grade tubing conforms to ASTM A500 Grade B, providing 58,000 PSI tensile strength and excellent weldability. The robust dimensions and strength-to-weight ratio make it ideal for building frames, trailer beds, heavy equipment supports, and other load-bearing applications. In stock for Los Angeles pickup. Learn More

This 3/4 Inch Square Plastic Cap is designed for a secure fit on square tubing, providing a clean finish and protection. Made from durable, weather-resistant LDPE plastic, it is ideal for finishing fences, railings, and furniture. It meets general industrial quality standards for non-structural applications. Learn More

Hot Rolled Steel Rectangular Tube, 6" x 4" with a 0.188" wall thickness. Manufactured to ASTM A500 Grade B, this structural tubing offers a high strength-to-weight ratio with 58,000 PSI tensile strength and excellent weldability. The large profile provides superior resistance to bending and torsional stress, ideal for heavy structural frames, equipment bases, and trailer construction. In stock for Los Angeles pickup. Learn More

304 Stainless Steel Flat Bar with a 3-inch width and 1/8-inch thickness, sold in 144-inch lengths. Conforming to ASTM A276, this bar provides 73,200 PSI tensile strength, excellent corrosion resistance, and superior weldability. Its versatile size is ideal for structural braces, equipment framework, base plates, and general fabrication projects. In stock for immediate pickup in Los Angeles. Learn More

4" x 4" x 0.250" wall Hot Rolled Steel Square Tube, 20-foot length. Conforms to ASTM A500 Grade B with 46,000 PSI minimum yield strength. This large-format structural tubing, often called HSS, offers an excellent strength-to-weight ratio and superior weldability. Ideal for heavy structural frames, industrial supports, building columns, and trailer manufacturing. In stock for Los Angeles pickup. Learn More

This 6061-T6 Aluminum Flat Bar measures 1 inch wide by 3/16 inch thick in a 144-inch length. Conforming to ASTM B211, it combines high strength (45,000 PSI tensile) with excellent machinability and corrosion resistance. The T6 temper indicates it is heat-treated for maximum strength. This versatile size is ideal for structural bracing, machine ways, and custom mounting plates. In stock Los Angeles. Learn More

4" x 0.188" wall Hot Rolled Steel Square Tube, available in 20-foot lengths. This A500 Grade B tubing meets ASTM A500 specifications and offers a minimum yield strength of 46,000 PSI. Its high strength-to-weight ratio and excellent weldability make it ideal for structural frames, supports, and general fabrication. In stock for same-day Los Angeles pickup. Learn More

Enhance perimeter security with our CBT-65 Steel Razor Wire. This 50-foot coil is made from high-tensile galvanized steel for maximum durability and corrosion resistance, manufactured to meet demanding industrial security standards. It serves as a superior alternative to standard barbed wire for high-security applications. Learn More

Our 6-inch rubber roller is an industrial-grade component designed for durability and smooth operation. Constructed from high-traction rubber on a robust core, it is ideal for material handling systems and heavy-duty MRO applications. Learn More

6" x 0.375" A500 Grade B Hot Rolled Steel Square Tube, sold in 240" lengths. Conforming to ASTM A500, this structural tubing provides 58,000 PSI tensile strength and excellent weldability. Its large profile and thick wall make it ideal for heavy-duty structural applications, including building frames, industrial supports, and heavy equipment bases. In stock for immediate Los Angeles pickup. Learn More

3/4" x 16GA Hot Rolled Steel Square Tube, 240" length. Conforms to ASTM A500 Grade B with 58,000 PSI tensile strength and excellent weldability. Ideal for lightweight structural applications like frames, supports, and general fabrication. Its small profile is suited for gate frames, equipment guards, and bracing. In stock for Los Angeles pickup. Learn More

This 1/4" x 2" Hex Lag Screw features a protective zinc plating per ASTM B633. Manufactured from low carbon steel, it meets ASTM A307 specifications, providing reliable holding power and a minimum tensile strength of 60,000 psi for wood construction applications. Learn More

Our 12-inch industrial door spring is engineered from high-tensile spring steel for maximum durability and cycle life. Designed to meet ASTM A227/A228 performance standards, it provides reliable tension for heavy-duty commercial and industrial doors. Features a corrosion-resistant zinc-plated finish for long-lasting use. Learn More

This 1 1/4" x 1 3/4" small welding tab is manufactured from high-quality, weldable low-carbon steel. Featuring a 1/8" thickness and a 3/8" hole, it provides a reliable connection point for industrial fabrication and repair projects compatible with AWS certified consumables. Learn More

5" x 5" Hot Rolled Steel Square Tube with a 0.188" wall, 240" length. Conforms to ASTM A500 Grade B, offering a minimum yield strength of 46,000 PSI and excellent weldability. This large-format hollow structural section (HSS) is ideal for heavy structural frames, industrial supports, columns, and equipment bases. In stock for same-day Los Angeles pickup. Learn More

1" x 1" x 3/16" 304 Stainless Steel Angle in a 240-inch length. Conforming to ASTM A276, this material provides excellent corrosion resistance and weldability with a tensile strength of 73,200 PSI. Its small profile is ideal for light structural support, custom brackets, architectural trim, and equipment framing where both strength and a clean finish are required. In stock for immediate Los Angeles pickup. Learn More

Our 3-Inch Rubber Roller is an industrial-grade component designed for material handling and fabrication. Features a durable, high-traction rubber surface on a steel core, engineered for consistent performance in MRO and production environments. Learn More

A36 Hot Rolled Steel Channel, designated C12 x 20.7, with a 12" depth and weighing 20.7 lbs/ft. Conforms to ASTM A36 standards. Delivers a minimum yield strength of 36,000 PSI and excellent weldability. This large structural channel is ideal for building frames, heavy equipment bases, trailer chassis, and industrial supports. In stock for same-day cutting and pickup in Los Angeles. Learn More

This 6-inch V-Groove wheel is engineered for heavy-duty sliding gates, industrial doors, and material handling systems running on inverted angle iron track. Its durable steel construction ensures high load capacity and smooth operation. The 6-inch diameter provides stability for large gates and spans uneven surfaces effectively. Ideal for fabricators and installers requiring reliable gate hardware. In stock for Los Angeles pickup. Learn More

2" x 2" x 0.120" wall 304 Stainless Steel Square Tube, supplied in 20-foot lengths. Conforms to ASTM A269 with 73,200 PSI tensile strength, excellent weldability, and superior corrosion resistance. This medium-sized tube is ideal for structural applications like equipment frames, support columns, architectural handrails, and guardrails where strength and aesthetics are required. In stock for same-day Los Angeles pickup. Learn More

This 4-inch V-Groove Wheel is engineered for smooth operation on inverted angle iron tracks. Its forged steel construction provides durability and a high load capacity for sliding gates, industrial carts, and heavy-duty rolling doors. The precision-machined groove ensures accurate alignment and reduced friction. In stock for immediate pickup or delivery in Los Angeles. Learn More

The Flower Welding Tab 1 x 3 is a versatile fabrication component made from high-quality, weldable mild steel. These tabs provide secure mounting and connection points, ideal for various industrial and ornamental welding projects. They are designed for reliability and ease of use in professional fabrication settings. Learn More

C7 x 9.8 A36 Hot Rolled Steel Channel, measuring 7" deep with a 2.09" flange. This structural channel conforms to ASTM A36 standards and provides a minimum yield strength of 36,000 PSI. Its excellent weldability and strength-to-weight ratio make it ideal for equipment frames, vehicle chassis, structural supports, and general fabrication projects. In stock and available for immediate pickup in Los Angeles. Learn More

3/16" thick A36 Hot Rolled Steel Plate, measuring 48" x 120". This structural plate conforms to ASTM A36 and provides a minimum yield strength of 36,000 PSI with excellent formability and weldability. Its medium thickness is ideal for gussets, structural base plates, and general fabrication projects where strength and economy are key. In stock for immediate Los Angeles pickup. Learn More

Secure equipment and materials with the Regal 2” x 20ft Ratchet Cargo Lash. This industrial tie-down is made from durable polyester webbing, meets WSTDA-T-1 standards, and features a 3,335 lbs Working Load Limit (WLL) for reliable performance. Learn More

5/8" x 5/8" Hot Rolled Steel Square Tube with a 0.065" wall thickness, supplied in 20-foot lengths. Conforming to ASTM A500 Grade B, this structural tubing offers a minimum yield strength of 46,000 PSI and excellent weldability. Its small profile is ideal for lightweight frames, supports, brackets, and general fabrication projects where strength and economy are key. In stock for same-day Los Angeles pickup. Learn More

5/8" diameter Cold Rolled All Thread Rod in a 10 ft length, featuring a zinc-plated finish for corrosion resistance. Made from low-carbon steel that meets the strength requirements of ASTM A307 Grade A. Offers good weldability and strength for general-purpose fastening, bracing, and support applications in construction and manufacturing. In stock for immediate Los Angeles pickup. Learn More

5/8" x 48" x 120" A36 Hot Rolled Steel Plate, compliant with ASTM A36 standards. This material features a minimum yield strength of 36,000 PSI and excellent weldability, making it a reliable choice for structural applications. The large 5/8" thickness is ideal for heavy-duty uses like machinery base plates, gussets, and structural supports where durability is critical. In stock Los Angeles. Learn More

This 1-1/4" x 1-1/4" x 1/4" Type 304 Stainless Steel Angle conforms to ASTM A276. It provides a tensile strength of 73,200 PSI, excellent corrosion resistance, and superior weldability. Its small leg size makes it ideal for light structural supports, brackets, corner guards, and architectural trim. In stock Los Angeles. Learn More

A36 Hot Rolled Steel Channel, size C3 x 5.0 (3" Height, 5.0 lbs/ft), in 240" lengths. Conforming to ASTM A36, this structural channel offers a minimum yield strength of 36,000 PSI and excellent weldability. Its C-shaped profile provides good structural support for frames, braces, and trailer components. In stock for immediate Los Angeles pickup. Learn More

4 inch x 1/4 inch 6061-T6 Aluminum Flat Bar, 144-inch length. Conforming to ASTM B211, this versatile alloy combines 45,000 PSI tensile strength with good machinability and excellent corrosion resistance. The T6 temper provides optimal strength for structural applications. This large width is ideal for base plates, heavy structural components, and die components. In stock for immediate Los Angeles pickup. Learn More

6" x 4" Hot Rolled Steel Rectangular Tube with a 0.250" wall thickness, available in 20 ft lengths. This structural tubing conforms to ASTM A500 Grade B, offering a tensile strength of 58,000 PSI and excellent weldability. Its high strength-to-weight ratio makes it ideal for structural frames, equipment bases, and trailer construction. In stock for same-day pickup in Los Angeles. Learn More

3/8" x 48" x 120" Hot Rolled Diamond Plate, made from A36 structural steel and conforming to ASTM A786 standards. This heavy-duty plate offers 58,000-80,000 PSI tensile strength and a raised pattern for maximum skid resistance. Its substantial thickness makes it ideal for industrial flooring, heavy equipment ramps, trench covers, and structural walkways. In stock for same-day Los Angeles pickup. Learn More

2" x 2" x 0.120" wall 304 Stainless Steel Square Tube, supplied in 20-foot (240") lengths with a 180-grit satin finish. This tube conforms to ASTM A269 and provides 73,200 PSI tensile strength, excellent corrosion resistance, and superior weldability. Its medium size is ideal for architectural handrails, structural framing, support columns, and equipment enclosures. In stock Los Angeles for immediate pickup or delivery. Learn More

1" x 1" x 1/4" 304 Stainless Steel Angle, available in 240" lengths. This austenitic grade conforms to ASTM A276, offering 73,200 PSI tensile strength, excellent weldability, and superior corrosion resistance. As a small profile, it is ideal for light framing, equipment guards, and architectural trim. In stock for immediate Los Angeles pickup. Learn More

3" x 3" Hot Rolled Steel Square Tube with a 0.083" wall thickness, available in 240" lengths. This A500 Grade B structural tubing offers a minimum yield strength of 46,000 PSI and excellent weldability. Its high strength-to-weight ratio makes it ideal for structural frames, equipment bases, trailer manufacturing, and general fabrication projects. In stock for same-day pickup in Los Angeles. Learn More

The 6-inch V-Groove Wheel Box is an industrial-grade component for heavy-duty track applications. Constructed from durable steel and cast iron, it features high load capacity ratings suitable for large sliding gates and material handling systems. This assembly is designed for reliable, smooth operation on angle iron tracks. Learn More

Grade 60 Hot Rolled Rebar, #8 size (1" diameter) in a 20-foot length. Conforming to ASTM A615, this reinforcing bar provides a minimum yield strength of 60,000 PSI for structural concrete applications. Its deformed surface ensures a strong mechanical bond, making it essential for reinforcing foundations, slabs, columns, and retaining walls. In stock for Los Angeles pickup. Learn More

2" Nominal Pipe Size (NPS) Galvanized Steel Pipe, Schedule 40 wall, 21-foot length. Conforms to ASTM A53 Grade B with 60,000 PSI tensile strength. The hot-dip zinc coating provides excellent corrosion resistance for outdoor and high-moisture use. Ideal for plumbing mains, HVAC piping, handrails, and structural posts. In stock for same-day Los Angeles pickup. Learn More

5" Nominal Pipe Size (NPS) Hot Rolled Black Pipe with a Schedule 40 wall. This A53 Grade B steel pipe offers a minimum tensile strength of 60,000 PSI and excellent weldability. Its large diameter and robust wall thickness make it ideal for high-flow fluid transfer, main water lines, industrial process piping, and heavy-duty structural columns. In stock for Los Angeles pickup. Learn More

3/8" x 48" x 120" Hot Rolled Steel Plate, conforming to ASTM A36. This structural plate provides a minimum yield strength of 36,000 PSI and excellent weldability for reliable fabrication. The thick 3/8" profile is ideal for heavy-duty applications like machinery base plates, gussets, and structural supports where strength and durability are critical. In stock for immediate Los Angeles pickup. Learn More

3/4" x 48" x 120" A36 Hot Rolled Steel Plate. Conforms to ASTM A36 with a minimum yield strength of 36,000 PSI. This large-format plate provides excellent weldability and good machinability for structural applications. Its substantial thickness is ideal for heavy-duty base plates, gussets, equipment mounting, and general fabrication projects requiring robust support. In stock for same-day Los Angeles pickup. Learn More

This 2" Square Pressed Steel Cap provides a clean, protective finish for square tubing and fence posts. Fabricated from durable, weldable mild steel, it prevents water ingress and adds a professional aesthetic to any ornamental ironwork project. Learn More

1 Inch Schedule 40 Galvanized Steel Pipe, sold in 21-foot lengths. Conforms to ASTM A53 Grade B, providing 60,000 PSI tensile strength and superior corrosion resistance from its hot-dip zinc coating. This medium-diameter pipe is ideal for plumbing mains, structural posts, outdoor handrails, and fence framework. A reliable choice for applications requiring strength and weather protection. In stock for same-day Los Angeles pickup. Learn More

The 2-Way Hand Riveter is an industrial-grade tool for reliable fastening in fabrication and MRO. Constructed from high-strength steel alloy, it provides the leverage needed for setting aluminum and steel rivets. Includes multiple nose pieces for versatility. Learn More

The 1 Sq Pressed Steel Cap is a durable, weldable finishing component for 1-inch square tubing. Made from low-carbon mild steel, it provides a clean, protective end for fence posts, railings, and metal furniture. Designed for easy integration in fabrication projects. Learn More

2" x 2" Galvanized Steel Square Tube with a 16 gauge wall, 24-foot length. Conforms to ASTM A500 Grade B with 58,000 PSI tensile strength. The hot-dip galvanized zinc coating provides excellent corrosion resistance for outdoor applications. This medium-sized tube is ideal for fabricating trailer frames, gate frames, and structural supports. In stock for Los Angeles pickup. Learn More

This 4-inch V-Groove Wheel Box is an industrial-grade component designed for high-load capacity on sliding gates and doors. Constructed from heavy-duty steel, it ensures smooth, reliable operation on angle iron tracks. Ideal for fabrication and MRO applications. Learn More

3/16" thick Hot Rolled Diamond Plate, available in 4' x 10' sheets. Produced from A36 structural steel and conforming to ASTM A786 standards for pattern, this plate provides maximum skid resistance. With a tensile strength of 58,000 PSI and excellent weldability, it is ideal for industrial flooring, ramps, truck beds, and stair treads. In stock for Los Angeles pickup. Learn More

6" Nominal Pipe Size (NPS) Hot Rolled Black Pipe with a Schedule 40 wall (0.280"). Manufactured to meet ASTM A53 Grade B standards, this pipe provides a minimum tensile strength of 60,000 PSI and excellent weldability. Its large diameter is ideal for industrial process piping, structural columns, and main water lines. In stock for Los Angeles pickup. Learn More

This 6 Inch Solid V-Groove Wheel is engineered for high-capacity applications, supporting loads up to 2000 lbs. Manufactured from solid steel to industrial standards, it provides durable and reliable performance on angle iron tracks for gates and carts. Learn More

2" x 3/16" 6061-T6 Aluminum Flat Bar, 144" length. Conforming to ASTM B211, this versatile alloy provides a high strength-to-weight ratio, good machinability, and excellent corrosion resistance. Its 45,000 PSI tensile strength makes it ideal for structural bracing, machine ways, and custom mounting plates. This medium-width bar is in stock for same-day Los Angeles pickup. Learn More

3/4" x 2" 6061-T6 Aluminum Flat Bar, available in 144" lengths. Conforms to ASTM B211, offering a versatile combination of high strength (45,000 PSI tensile), excellent corrosion resistance, and good machinability. This medium-width bar is ideal for structural bracing, machine ways, base plates, and custom fabricated parts. In stock for same-day cutting and pickup in Los Angeles. Learn More

Durable 5/8 Inch Square Plastic Caps designed for a secure, press-fit on square tubing. Made from industrial-grade, weather-resistant plastic, these caps provide a clean, finished appearance while protecting against dirt, moisture, and sharp edges. Ideal for fencing, furniture, and equipment fabrication. Learn More

2" x 5/8" 6061-T6 Aluminum Flat Bar, 144" length. Conforms to ASTM B211 with 45,000 PSI tensile strength, excellent machinability, and superior corrosion resistance. This versatile, medium-width bar is ideal for structural bracing, machine ways, base plates, and custom fabricated parts. Its high strength-to-weight ratio makes it a top choice for manufacturing and structural projects. In stock for Los Angeles pickup. Learn More

2" x 2" x 0.065" wall 304 Stainless Steel Square Tube, 240" length. With a 180 grit satin finish, this tube conforms to ASTM A269 and provides 73,200 PSI tensile strength. It combines excellent corrosion resistance and weldability, ideal for architectural applications like handrails, guardrails, and decorative trim where a clean, polished appearance is required. In stock for immediate Los Angeles pickup. Learn More

1-1/4" x 1-1/4" x 1/8" 6063-T5 Aluminum Angle, available in 144" lengths. Conforming to ASTM B308, this architectural grade offers excellent corrosion resistance, a smooth surface finish, and superior formability. With a tensile strength of 27,000 PSI, it's ideal for window frames, railings, and decorative trim where aesthetics are critical. In stock for same-day pickup in Los Angeles. Learn More

A 2" x 11 gauge Galvanized Square Tube, available in 24-foot lengths. Manufactured from ASTM A500 Grade B steel, this tube provides a minimum yield strength of 46,000 PSI for structural applications. The hot-dip galvanized zinc coating delivers superior corrosion resistance for outdoor use. Ideal for trailer frames, gates, handrails, and structural supports. In stock in Los Angeles. Learn More

1-1/4" x 1-1/4" x 1/8" 304 Stainless Steel Angle, sold in 20 ft (240") lengths. This versatile angle conforms to ASTM A276 and provides 73,200 PSI tensile strength, excellent corrosion resistance, and superior weldability. Its small profile is ideal for light structural framing, manufacturing equipment guards, support brackets, and architectural trim. In stock and available for same-day pickup in Los Angeles. Learn More

This 4-inch V-Groove Wheel is machined from solid steel for maximum durability and load capacity. The V-groove is engineered for smooth operation on inverted angle iron track, making it the ideal choice for heavy sliding gates, industrial doors, and material handling carts. Its robust construction ensures reliable performance in demanding applications. In stock for same-day pickup in Los Angeles. Learn More

10 Gauge A36 Hot Rolled Steel Sheet, measuring 48" x 120". Certified to ASTM A36, this sheet offers a minimum yield strength of 36,000 PSI and tensile strength of 58,000-80,000 PSI. Its excellent weldability and good formability make it a cost-effective choice for structural applications, gusset plates, and general fabrication projects where precise tolerances are not required. In stock for immediate Los Angeles pickup. Learn More

A 1" x 1" x 1/16" 6063 Aluminum Angle, sold in 144" lengths. This architectural-grade aluminum meets ASTM B308 standards and offers 27,000 PSI tensile strength. Known for its excellent corrosion resistance, weldability, and smooth surface finish, it is ideal for light structural applications, fabrication, and trim work. In stock Los Angeles. Learn More

16 Gauge (48" x 120") A36 Hot Rolled Steel Sheet. This material conforms to ASTM A36 and offers a minimum yield strength of 36,000 PSI, providing excellent weldability and good formability. Its medium thickness is ideal for structural panels, machine guards, trailer frames, and general fabrication projects where precise dimensions are not critical. A cost-effective solution for robust applications. In stock for Los Angeles pickup. Learn More

Our 12-inch rubber roller is an industrial-grade component designed for high-load capacity material handling. Featuring a durable, non-marring rubber surface bonded to a steel core, it provides smooth movement for conveyor systems and industrial carts. Engineered to meet demanding MRO and fabrication requirements. Learn More

1" x 1" x 1/8" 6063 Aluminum Angle, 144" length. Known as architectural aluminum, this T5 temper angle conforms to ASTM B308. It offers excellent corrosion resistance, a smooth surface finish ideal for anodizing, and good formability. With 27,000 PSI tensile strength, it's perfect for light structural applications like window frames, railings, and decorative trim. In stock for immediate Los Angeles pickup. Learn More

Our 4-inch Tube Ring is a high-quality decorative component forged from industrial-grade Class 25-30 gray cast iron. Designed for durability and easy integration, it's ideal for ornamental fencing, gates, and architectural fabrication projects. Learn More

This 9-inch door spring is engineered from high-tensile spring steel for reliable, long-lasting tension in commercial and industrial doors. Designed for high-cycle applications, it ensures consistent performance and durability for MRO and new installations. Learn More

304 Stainless Steel Flat Bar measuring 2" wide by 3/16" thick, in a 144" length. This versatile bar meets ASTM A276 standards and offers 73,200 PSI tensile strength, excellent corrosion resistance, and superior weldability. Its medium size is ideal for structural bracing, machine components, food equipment frames, and architectural trim. In stock for same-day Los Angeles pickup. Learn More

This 6 Inches Tube Ring is a versatile ornamental component engineered for fabricating handrails, fences, and gates. Constructed from durable, weldable steel, it provides a secure and decorative connection point. Ideal for both new construction and MRO projects requiring reliable hardware. Learn More

14 Gauge Hot Rolled Diamond Plate, 48" x 120". Conforms to ASTM A786 (pattern) on an A36 steel base. This plate offers 58,000 PSI tensile strength, excellent weldability, and a durable, slip-resistant surface. Ideal for industrial flooring, ramps, truck beds, and stair treads where safety and durability are critical. In stock for same-day Los Angeles pickup. Learn More

This 6063-T5 Aluminum Angle measures 1-1/4" x 1-1/4" with a 3/16" wall thickness, supplied in a 144" length. Conforming to ASTM B308, it offers 27,000 PSI tensile strength, excellent corrosion resistance, and a superior surface finish. Often called architectural aluminum, this small-profile angle is ideal for window frames, decorative trim, and lightweight structural support. In stock for same-day Los Angeles pickup. Learn More

The Eagle-1000 FR is a robust 1/2 HP slide gate operator designed for residential and light commercial applications. It handles gates up to 27 feet and 600 lbs with a continuous duty motor. This complete kit includes two remotes, a receiver, and a photo eye safety monitor for a secure and convenient access control solution. In stock for same-day pickup in Los Angeles. Learn More

This 1" x 1" x 1/8" Type 304 Stainless Steel Angle provides excellent corrosion resistance and structural rigidity. Conforming to ASTM A276, it features 73,200 PSI tensile strength and superior weldability. Its small profile is ideal for light framing, equipment brackets, corner guards, and architectural trim where both strength and a clean finish are required. In stock for same-day cutting and pickup in Los Angeles. Learn More

The Eagle-1 is a complete slide gate operator kit for residential applications. Its powerful 1/2 HP continuous-duty motor handles gates up to 18 feet and 300 lbs. This easy-to-install package includes two wireless remotes and a monitored reflective photo eye for enhanced security and safety. Ideal for automating driveway gates with reliable performance. In stock Los Angeles. Learn More

Versatile 1-1/4" x 1-1/4" x 16GA slotted angle for custom framing and support. This 120" angle is manufactured from commercial steel and features a galvanized coating (per ASTM A653) for excellent corrosion resistance, making it ideal for MRO and fabrication. Learn More

Grade 60 Hot Rolled Rebar, #7 size (7/8" diameter) in 20-foot lengths. Meets ASTM A615 standards with a minimum yield strength of 60,000 PSI and tensile strength of 90,000 PSI. Its deformed surface provides a superior mechanical bond with concrete, making it essential for reinforcing foundations, slabs, and columns. In stock for same-day Los Angeles pickup. Learn More

#3 (3/8") Grade 60 Hot Rolled Rebar, 20-foot length. Meets ASTM A615 specifications and features a minimum yield strength of 60,000 PSI and a deformed surface for superior mechanical bond with concrete. This standard reinforcing bar is essential for adding tensile strength to foundations, slabs-on-grade, and retaining walls. In stock for same-day Los Angeles pickup. Learn More

3/4" diameter (#6) Grade 60 Hot Rolled Rebar, available in 20-foot (240") lengths. This reinforcing bar meets ASTM A615 standards and provides a minimum yield strength of 60,000 PSI. Its deformed surface ensures a strong mechanical bond with concrete, making it essential for foundations, slabs, and structural columns. In stock Los Angeles. Learn More

11 Gauge (0.120") x 48" x 120" A36 Hot Rolled Steel Sheet. ASTM A36 certified, with a minimum yield strength of 36,000 PSI and excellent weldability. The medium thickness is ideal for structural panels, machine guards, trailer frames, and general fabrication. The hot rolled mill finish is suitable for applications where finish is secondary to strength. In stock for same-day Los Angeles pickup. Learn More

1/8" x 1-1/4" 304 Stainless Steel Flat Bar, sold in 144" lengths. Conforming to ASTM A276, this versatile alloy provides 73,200 PSI tensile strength with excellent corrosion resistance and weldability. Its medium width is ideal for structural bracing, machine ways, supports, and general fabrication projects requiring superior durability and a clean finish. In stock for immediate Los Angeles pickup. Learn More

Grade 60 #5 (5/8" diameter) Hot Rolled Rebar, supplied in a 20-foot length. This steel bar meets ASTM A615 specifications with a minimum yield strength of 60,000 PSI and a tensile strength of 90,000 PSI. Its deformed surface creates a strong mechanical bond with concrete, making it the industry standard for reinforcing foundations, slabs, and retaining walls. In stock for Los Angeles pickup. Learn More

1-1/4" x 1-1/4" Stainless Steel Square Tube with a 0.120" wall and 180 grit satin finish. This 304 grade tube conforms to ASTM A269 and features 73,200 PSI tensile strength, excellent weldability, and corrosion resistance. Its medium size is ideal for structural frames, architectural handrails, and support columns. In stock for same-day cutting and pickup in Los Angeles. Learn More

A36 Hot Rolled Steel Channel, size C6 x 8.2, measuring 6" high with a 1.920" flange and 0.200" web thickness, in 20-foot lengths. Conforming to ASTM A36, this structural channel provides 36,000 PSI minimum yield strength and excellent weldability. Its robust profile is ideal for equipment frames, structural supports, and general fabrication projects. In stock for Los Angeles pickup. Learn More

This 6061-T6 Aluminum Flat Bar measures 1/8" thick by 1-1/4" wide in a 144" length. Conforming to ASTM B211, this versatile alloy provides 45,000 PSI tensile strength, excellent weldability, and good machinability. Its high strength-to-weight ratio and corrosion resistance make it ideal for structural bracing, support brackets, and general fabrication projects. In stock for immediate pickup in Los Angeles. Learn More

A36 Hot Rolled Steel Channel, size C10 x 15.3 (10" depth, 15.3 lbs/ft). Standard 20-foot (240") length. Conforms to ASTM A36, providing 36,000 PSI minimum yield strength and excellent weldability. This large structural channel is ideal for equipment manufacturing, trailer frames, and building supports where robust load-bearing capacity is required. In stock for immediate Los Angeles pickup. Learn More

A36 Hot Rolled Steel Channel, C6 x 10.5, with a 6" height, 2.034" flange, and 0.314" web thickness. Conforms to ASTM A36, providing a minimum yield strength of 36,000 PSI and excellent weldability. This large structural profile is ideal for equipment frames, building supports, trailer chassis, and general fabrication projects requiring robust, load-bearing components. Available in 20-foot lengths for immediate Los Angeles pickup. Learn More

A36 Hot Rolled Steel Channel, C6 x 13 size, measuring 6" in depth with a 2.157" flange and weighing 13 lbs/ft. Conforming to ASTM A36, this structural channel offers a minimum yield strength of 36,000 PSI and excellent weldability. Its large size is ideal for equipment frames, structural supports, trailer frames, and general fabrication projects requiring robust performance. In stock for Los Angeles pickup. Learn More

1/4" x 1-1/4" 6061-T6 Aluminum Flat Bar, 144" length. Conforming to ASTM B211, this bar combines 45,000 PSI tensile strength with good machinability and excellent corrosion resistance. This versatile, medium-width bar is ideal for structural bracing, support brackets, machine ways, and general fabrication projects. Ready for same-day cutting and pickup in Los Angeles. Learn More