Search results for: 'eagle 1 bear remote control visor clip eg642'

1" x 1" Hot Rolled Steel Square Bar in 240" lengths. Made from general-purpose A36 steel, it conforms to ASTM A36 specifications and provides a minimum yield strength of 36,000 PSI. Its excellent weldability and formability make it ideal for structural frames, brackets, trailer components, and general fabrication. This medium-sized bar is a versatile choice for construction and industrial maintenance. In stock for Los Angeles pickup. Learn More

The 1/2" x 5" Power Bull Anchor is a heavy-duty carbon steel fastener designed for anchoring into concrete. Featuring a zinc-plated finish per ASTM B633 for corrosion resistance, it provides reliable holding power for structural and MRO applications. Includes nut and washer for complete installation. Learn More

2-1/2" x 2-1/2" x 3/16" 304 Stainless Steel Angle, available in 20-foot lengths. This versatile austenitic stainless angle conforms to ASTM A276, offering 73,200 PSI tensile strength, excellent corrosion resistance, and superior weldability. Its medium size is ideal for structural framing, equipment bases, shelving, and architectural trim where both strength and a clean finish are required. In stock for Los Angeles pickup. Learn More

1/2" x 1/2" 304 Stainless Steel Square Bar, 144" length. Conforms to ASTM A276, offering an excellent balance of strength, corrosion resistance, and weldability. With 73,200 PSI tensile strength, this versatile bar is ideal for structural supports, frames, shafts, and general fabrication. Its clean finish is suitable for architectural and food-grade applications. In stock for Los Angeles pickup. Learn More

1" diameter 6061-T6 Aluminum Round Bar, 144" length. This versatile bar meets ASTM B211 standards and provides 45,000 PSI tensile strength, good machinability, and excellent corrosion resistance. Its medium diameter is ideal for shafts, axles, structural components, and custom machined parts. In stock for same-day cutting and pickup in Los Angeles. Learn More

1/4" x 1/4" 304 Stainless Steel Square Bar, 144" length. Conforms to ASTM A276, offering excellent corrosion resistance and weldability with 73,200 PSI tensile strength. This austenitic, non-magnetic grade is ideal for structural supports, frames, shafts, and food processing equipment where sanitation is critical. Its small profile is suited for light-duty braces and mounting hardware. In stock for Los Angeles pickup. Learn More

This 3-piece Aviation Snip Set includes essential tools for any metal fabricator's toolkit. The set contains a left-cut (red handle), right-cut (green handle), and straight-cut (yellow handle) snip. Featuring hardened steel blades and a compound leverage design, these snips provide maximum cutting power with minimal effort. Ideal for cutting sheet metal in fabrication, HVAC, and roofing projects. In stock Los Angeles. Learn More

1" x 1" Galvanized Steel Square Tube with a 16 gauge wall, sold in a 24-foot length. Conforming to ASTM A500 Grade B, this structural tubing provides a minimum yield strength of 46,000 PSI. The hot-dip galvanized zinc coating delivers excellent corrosion and rust resistance, making it ideal for outdoor frames, trailers, and gates. In stock for Los Angeles pickup. Learn More

1" x 1" 6061-T6 Aluminum Square Tube with a 0.125" wall, available in 144" lengths. This extruded product conforms to ASTM B221 and offers an excellent strength-to-weight ratio with 45,000 PSI tensile strength. It is easily machined and welded, making it a versatile choice for structural frames, railings, machine guards, and custom fabrication projects. In stock for same-day Los Angeles pickup. Learn More

1" diameter 1018 Cold Rolled Steel Round Bar, 144" length. Conforming to ASTM A108, this bar has a tensile strength of 63,800 PSI and excellent machinability. Its smooth, scale-free surface and tight dimensional tolerances make it ideal for shafts, axles, pins, and custom machined parts requiring precision. In stock Los Angeles. Learn More

1 inch 1018 Cold Rolled Steel Hexagon Bar, 144-inch length. Conforms to ASTM A108 standards, delivering 63,800 PSI tensile strength and excellent machinability. Its smooth finish and tight tolerances make it ideal for fasteners, nuts, hydraulic fittings, and machined components requiring a hex shape for gripping. In stock for same-day Los Angeles pickup. Learn More

1-inch diameter 304 Stainless Steel Round Bar, 144" length. Conforms to ASTM A276, providing 73,200 PSI tensile strength with excellent corrosion resistance and weldability. This versatile austenitic grade is ideal for a wide range of applications. Its medium diameter is perfectly suited for shafts, axles, architectural supports, and machined components. In stock for Los Angeles pickup. Learn More

1/4" diameter 6061-T6 Aluminum Round Bar in 144" lengths. This versatile, heat-treated alloy conforms to ASTM B211 and offers 45,000 PSI tensile strength, excellent machinability, and superior corrosion resistance. Its small diameter is perfectly suited for manufacturing pins, dowels, small shafts, and precision turned components. Ready for same-day cutting and pickup in Los Angeles. Learn More

This 1/2" diameter 6061-T6 Aluminum Round Bar comes in a 144" length. Conforming to ASTM B211, it combines high strength (45,000 PSI tensile), excellent machinability, and superior corrosion resistance. This versatile, medium-diameter bar is ideal for producing machined parts, structural components, shafts, and custom brackets. In stock and available for same-day pickup in Los Angeles. Learn More

This high-performance 0.8mm (.030") MIG welding wire is engineered for superior results in fabrication and repair. AWS/ASME certified, it ensures strong, consistent welds on mild and carbon steels. Packaged in convenient 11 LBS (1KG) spools for project efficiency. Learn More

1/4" x 48" x 120" A36 Hot Rolled Steel Plate, compliant with ASTM A36 standards. This structural plate offers a guaranteed minimum yield strength of 36,000 PSI, excellent weldability, and good formability. Its medium thickness is ideal for structural panels, machinery guards, gussets, and general fabrication projects where strength and economy are key. In stock for same-day Los Angeles pickup. Learn More

1" x 1" x 0.120" wall 304 Stainless Steel Square Tube, 240" length. Conforms to ASTM A269 with 73,200 PSI tensile strength, excellent corrosion resistance, and weldability. This medium-sized tube provides an ideal balance of strength and weight for structural framing, equipment bases, architectural handrails, and supports. In stock for immediate Los Angeles pickup or delivery. Learn More

1/8 inch diameter 6061-T6 Aluminum Round Bar, 144 inches long. This versatile alloy conforms to ASTM B211 and features 45,000 PSI tensile strength, excellent machinability, and superior corrosion resistance. Its small diameter is perfect for producing pins, dowels, small shafts, and other precision turned parts requiring high strength and a good surface finish. In stock for same-day pickup in Los Angeles. Learn More

1 Inch Schedule 40 Galvanized Steel Pipe, sold in 21-foot lengths. Conforms to ASTM A53 Grade B, providing 60,000 PSI tensile strength and superior corrosion resistance from its hot-dip zinc coating. This medium-diameter pipe is ideal for plumbing mains, structural posts, outdoor handrails, and fence framework. A reliable choice for applications requiring strength and weather protection. In stock for same-day Los Angeles pickup. Learn More

1/4" diameter 1018 Cold Rolled Round Bar, 144" length. Conforms to ASTM A108 with 63,800 PSI tensile strength and excellent machinability. This cold drawn bar has tight tolerances and a smooth finish, ideal for small shafts, pins, dowels, and fastener blanks. In stock for Los Angeles pickup. Learn More

1/2" diameter 304 Stainless Steel Round Bar in 144" lengths. This versatile, general-purpose stainless conforms to ASTM A276 specifications. It offers 73,200 PSI tensile strength, excellent corrosion resistance, and superior weldability. Ideal for medium-sized shafts, structural supports, food-grade equipment, and architectural applications. In stock for immediate Los Angeles pickup. Learn More

1/4" diameter 304 Stainless Steel Round Bar, 144" length. This versatile austenitic stainless steel conforms to ASTM A276 and provides 73,200 PSI tensile strength with excellent corrosion resistance and weldability. The small diameter is ideal for manufacturing precision pins, dowels, small shafts, and fastener blanks. In stock for immediate pickup in Los Angeles. Learn More

1/8" diameter 1018 Cold Rolled Steel Round Bar, 144" length. Conforms to ASTM A108 with a tensile strength of 63,800 PSI. The cold drawn process provides a smooth, scale-free finish and tight dimensional tolerances. This small diameter is ideal for manufacturing precision pins, dowels, fastener blanks, and small shafts. In stock for Los Angeles pickup. Learn More

1/2" diameter 1018 Cold Rolled Steel Round Bar, 144" length. Conforms to ASTM A108 with 63,800 PSI tensile strength and a smooth, scale-free finish. Known for its excellent machinability and tight dimensional tolerances, this medium-diameter bar is ideal for manufacturing shafts, axles, bushings, and other precision machined components. In stock for Los Angeles pickup. Learn More

1-3/8" diameter 6061-T6 Aluminum Round Bar, 144" length. This versatile alloy conforms to ASTM B211 and provides 45,000 PSI tensile strength, good machinability, and excellent corrosion resistance. Its medium diameter is ideal for shafts, axles, structural components, and custom machined parts requiring a high strength-to-weight ratio. In stock for same-day Los Angeles pickup. Learn More

Size 9-1/2 industrial rubber boots with a 16" height for maximum coverage. Built for demanding job site conditions, these waterproof boots offer reliable protection against water, mud, and debris. The durable rubber construction and treaded, slip-resistant sole provide safety and comfort for fabricators, construction workers, and maintenance personnel. In stock for Los Angeles pickup. Learn More

The 251V is a high-quality decorative ornamental element crafted from Class 25-30 gray iron. Its durable composition is ideal for architectural detailing, custom fencing, gates, and other fabrication projects requiring classic, robust designs. Learn More

1/2" NPS Schedule 40 Galvanized Steel Pipe in 21-foot lengths. Conforms to ASTM A53 Grade B with a 60,000 PSI tensile strength. The hot-dip zinc coating provides superior corrosion resistance for outdoor and high-moisture environments. This small diameter is ideal for plumbing, non-potable water lines, conduit, and residential handrails. In stock for same-day Los Angeles pickup. Learn More

1/8" diameter 304 Stainless Steel Round Bar, 144" length. Conforms to ASTM A276, this versatile austenitic grade offers excellent corrosion resistance and weldability. Its 73,200 PSI tensile strength makes it suitable for a wide range of applications. The small diameter is ideal for pins, fastener blanks, and precision components in food processing and architectural projects. In stock for Los Angeles pickup. Learn More

1-inch diameter Cold Rolled All Thread Rod in a 120-inch length with a zinc plated finish. This rod meets ASTM A307 Grade A strength requirements, with a base material tensile strength of 63,800 PSI. The zinc plating provides good corrosion resistance for general-purpose fastening, anchoring systems, and suspending HVAC fixtures. In stock for immediate Los Angeles pickup. Learn More

1/2" diameter 303 Stainless Steel Round Bar in 144" lengths. Certified to ASTM A582, this free-machining grade offers 90,000 PSI tensile strength and excellent machinability for high-speed production. Its sulfur content ensures superior chip breaking, making it ideal for shafts, axles, and complex machined components where a fine surface finish is required. In stock for Los Angeles pickup. Learn More

1/4" diameter A36 Hot Rolled Steel Round bar in a 240" (20 ft) length. This general-purpose structural steel conforms to ASTM A36 and provides a minimum yield strength of 36,000 PSI. Its low carbon content ensures excellent weldability and formability. The small diameter is ideal for creating pins, dowels, concrete anchors, and custom brackets. In stock for Los Angeles pickup. Learn More

This 1/4" diameter 303 Stainless Steel Round Bar, sold in 144" lengths, conforms to ASTM A582. Known for its excellent machinability, this free-machining grade has a 90,000 PSI tensile strength, making it ideal for high-speed production. Its small diameter is perfect for creating pins, dowels, fastener blanks, and precision screw machine components. In stock for same-day Los Angeles pickup. Learn More

1/2" x 1/2" 304 Stainless Steel Square Tube with a 0.065" wall, available in 240" lengths. Conforms to ASTM A269 specifications, offering a balance of 73,200 PSI tensile strength, excellent weldability, and superior corrosion resistance. This small-profile tubing is ideal for architectural trim, decorative work, lightweight frames, and support structures. In stock for same-day Los Angeles pickup. Learn More

1/8" diameter 303 Stainless Steel Round Bar in 144" lengths. Certified to ASTM A582, this free-machining grade offers 90,000 PSI tensile strength and excellent machinability for high-speed production. The sulfur content ensures superior chip breaking and a fine surface finish. This small diameter is ideal for pins, dowels, fastener blanks, and precision screw machine parts. In stock for Los Angeles pickup. Learn More

1/8" thick Hot Rolled Steel Diamond Plate, available in 48" x 120" sheets. Made from durable A36 steel and conforming to ASTM A786 for pattern and skid resistance. This plate offers excellent weldability and strength, making it ideal for high-traffic applications like industrial flooring, ramps, stair treads, and truck bed liners. Its raised pattern provides multi-directional grip. In stock for Los Angeles pickup. Learn More

This 1/8" 6013 All-Purpose Welding Rod is an AWS/ASME certified electrode designed for versatile performance. With a 60,000 psi tensile strength, its mild steel core and flux coating ensure a stable arc and easy slag removal, making it ideal for general fabrication and repair. Learn More

1" NPS Schedule 40 pipe manufactured from 304 stainless steel, supplied in a 240" (20 ft) length. Conforming to ASTM A312, it provides excellent weldability and corrosion resistance with a tensile strength of 73,200 PSI. This versatile size is ideal for fluid transport, industrial plumbing, and structural applications like handrails and support posts. In stock for Los Angeles pickup. Learn More

2-1/2" diameter 1018 Cold Rolled Steel Round Bar, 144" length. Conforming to ASTM A108, this bar has a tensile strength of 63,800 PSI, excellent machinability, and a smooth, scale-free surface. Its large diameter makes it ideal for heavy-duty shafts, large machined parts, industrial rollers, and forging stock applications. In stock for Los Angeles pickup. Learn More

1" OD x 0.125" wall 6061-T6 Aluminum Round Tube, supplied in a 144" length. This versatile alloy conforms to ASTM B210 and offers 45,000 PSI tensile strength, excellent weldability, and superior corrosion resistance. Its high strength-to-weight ratio makes it ideal for structural frames, equipment supports, railings, and automotive components. In stock for immediate Los Angeles pickup. Learn More

This 1/2" x 3" Hex Lag Screw features a zinc-plated finish for moderate corrosion resistance. Manufactured from low carbon steel to meet ASTM A307 standards, it provides reliable holding power for wood construction and framing applications. Learn More

1" x 1" 304 Stainless Steel Square Tube with a 0.065" wall and 180 grit satin finish. This tube conforms to ASTM A269, delivering 73,200 PSI tensile strength, excellent corrosion resistance, and superior weldability. Its structural efficiency and aesthetic finish make it ideal for architectural handrails, support frames, food service equipment, and decorative applications. In stock for immediate Los Angeles pickup. Learn More

1" NPS Schedule 40 Aluminum Pipe, manufactured from 6063-T5 aluminum alloy. Conforming to ASTM B241, this pipe offers excellent corrosion resistance and a superior surface finish ideal for anodizing. With a tensile strength of 27,000 PSI, it provides a great balance of strength and workability for architectural applications like handrails, frames, and trim. In stock for Los Angeles pickup. Learn More

1 Inch Schedule 40 Hot Rolled Black Pipe, sold in 21-foot lengths. Manufactured to ASTM A53 Grade B standards, it offers 60,000 PSI tensile strength and excellent weldability. This medium-sized pipe is ideal for natural gas lines, fire sprinkler systems, scaffolding, and general structural fabrication. An economical choice for fluid conveyance and support applications. In stock for Los Angeles pickup. Learn More

1/2" diameter Cold Rolled All Thread Rod, supplied in 120-inch lengths with a zinc plated finish for corrosion resistance. Conforming to the strength requirements of ASTM A307, this rod offers a tensile strength of 63,800 PSI. Its continuous threading provides maximum versatility for custom-length fasteners, anchoring systems, and structural bracing. In stock for same-day Los Angeles pickup. Learn More

1" diameter Cold Rolled All Thread Rod in 120" (10 ft) lengths. Made from 1018 steel with an oil finish for rust prevention, this rod meets ASTM A307 Grade A strength requirements with a 60,000 PSI tensile strength. The continuous threading provides versatile fastening for construction, manufacturing, and general repair. Easily cut to custom lengths. In stock for Los Angeles pickup. Learn More

1-7/8" diameter 1018 Cold Rolled Round Bar, 144" length. Conforms to ASTM A108 with 53,700 PSI yield strength and excellent machinability. The cold drawn process provides a smooth finish and tight dimensional tolerances. This medium-diameter bar is ideal for manufacturing shafts, axles, pins, and various machined components requiring strength and precision. In stock for Los Angeles pickup. Learn More

1-3/8" diameter 1018 Cold Rolled Round Bar, sold in 144" lengths. Conforms to ASTM A108 with 53,700 PSI yield strength and excellent machinability. The cold drawing process provides a smooth, scale-free surface and tight dimensional tolerances. This medium-diameter bar is ideal for manufacturing shafts, axles, pins, and other high-precision machined components. In stock for immediate Los Angeles pickup. Learn More

This 2-1/2" x 2-1/2" Type 304 Stainless Steel Square Tube features a 0.180" wall thickness and meets ASTM A269 specifications. With 73,200 PSI tensile strength, it combines excellent structural integrity with superior corrosion resistance and weldability. Its medium size is ideal for architectural handrails, equipment frames, support columns, and general fabrication projects. In stock for same-day Los Angeles pickup and custom cutting. Learn More

2-1/2" x 2-1/2" 304 Stainless Steel Square Tube with a 0.250" wall thickness, supplied in 20-foot lengths. Conforms to ASTM A269 standards, offering a balance of 73,200 PSI tensile strength, excellent weldability, and superior corrosion resistance. Its medium size and robust wall make it ideal for fabricating structural frames, support columns, and architectural handrails. In stock for same-day Los Angeles pickup. Learn More

1/4 inch diameter Cold Rolled All Thread Rod with a zinc plated finish for corrosion resistance. Continuous threading along its 120-inch length provides versatile fastening. Made from low-carbon steel conforming to ASTM A307 strength requirements, it offers 63,800 PSI tensile strength. Ideal for light-duty bracing, suspending conduit, and creating custom-length fasteners. In stock for same-day Los Angeles pickup. Learn More

This 1/4" x 2" Hex Lag Screw features a protective zinc plating per ASTM B633. Manufactured from low carbon steel, it meets ASTM A307 specifications, providing reliable holding power and a minimum tensile strength of 60,000 psi for wood construction applications. Learn More

3-1/2 inch NPS Schedule 40 Galvanized Steel Pipe. Conforming to ASTM A53 Grade B, this pipe features a hot-dip zinc coating for superior corrosion resistance and 60,000 PSI tensile strength. Its durable, weather-resistant finish makes it ideal for outdoor structures, water lines, and safety barriers. Large diameter suitable for main water lines and structural columns. In stock for Los Angeles pickup. Learn More

A 1" x 3" 6061-T6 Aluminum Flat Bar, sold in 144" lengths. This versatile, heat-treatable grade conforms to ASTM B211 and features a 45,000 PSI tensile strength, good machinability, and excellent corrosion resistance. Its medium width is ideal for structural bracing, support brackets, wear strips, and custom machined components. In stock for same-day Los Angeles pickup. Learn More

1" OD x 0.065" wall 304 Stainless Steel Round Tube in 240-inch lengths. Conforming to ASTM A269, this tubing offers a 73,200 PSI tensile strength, excellent weldability, and robust corrosion resistance. Its versatile medium diameter is ideal for architectural handrails, structural equipment frames, automotive applications, and sanitary food processing lines. In stock for same-day Los Angeles pickup. Learn More

1/2" diameter Cold Rolled Steel All Thread Rod with an oil finish, supplied in 120" lengths. Made from low-carbon steel, it meets the strength requirements of ASTM A307 Grade A and offers 63,800 PSI tensile strength. The continuous threading provides versatile fastening for construction, manufacturing, and general repair. In stock for Los Angeles pickup. Learn More

1" x 0.065" wall 304 Stainless Steel Square Tube, sold in 240-inch lengths. This versatile tube meets ASTM A269 standards and offers 73,200 PSI tensile strength, combining excellent corrosion resistance with superior weldability. Its medium size is ideal for fabricating structural frames, equipment supports, architectural handrails, and decorative elements. In stock for same-day cutting and Los Angeles pickup. Learn More

1/2" NPS Schedule 40 Aluminum Pipe in 6063-T5 temper, available in 240" lengths. Conforming to ASTM B241, this architectural aluminum offers 27,000 PSI tensile strength, excellent corrosion resistance, and a superior surface finish ideal for anodizing. The small diameter is perfect for creating store fixtures, fluid lines, and decorative frameworks. In stock for same-day pickup in Los Angeles. Learn More

1/2 inch Nominal Pipe Size (NPS) Hot Rolled Black Pipe with a Schedule 40 wall. This product conforms to ASTM A53 Grade B specifications, providing 60,000 PSI tensile strength and excellent weldability. The small diameter is ideal for plumbing, natural gas lines, compressed air systems, and light structural applications like handrails. Standard uncoated 'black' finish. In stock for Los Angeles pickup. Learn More

1/2" NPS Schedule 40 Stainless Steel Pipe, 240" length. This 304 stainless steel pipe conforms to ASTM A312 and has a tensile strength of 73,200 PSI. It combines excellent corrosion resistance and weldability, making it a standard for fluid and gas transport. The small diameter is ideal for instrumentation lines, conduit, and small-scale process piping. In stock for Los Angeles pickup. Learn More

1-inch OD 304 Stainless Steel Round Tube with a 0.120-inch wall, 240-inch length. Conforms to ASTM A269, this tubing combines a 73,200 PSI tensile strength with excellent corrosion resistance and weldability. Its versatile nature makes it ideal for structural applications, architectural handrails, food processing equipment, and general fabrication projects. In stock and available for same-day pickup in Los Angeles. Learn More

3/4" x 5/16" 1018 Cold Rolled Steel Flat Bar, 144" length. Conforms to ASTM A108, providing 63,800 PSI tensile strength, a smooth surface finish, and tight dimensional tolerances. This grade offers good machinability and weldability. Its small profile is ideal for manufacturing precision brackets, straps, shims, and small frame components. In stock for Los Angeles pickup. Learn More

3" x 5/8" 1018 Cold Rolled Steel Flat Bar, 144" length. Conforms to ASTM A108 with 63,800 PSI tensile strength, excellent machinability, and superior dimensional tolerances. Its smooth, scale-free surface is ideal for painting or plating. This medium-width bar is used for structural bracing, machine ways, and base plates. In stock for same-day Los Angeles pickup. Learn More

2" x 3/4" 1018 Cold Rolled Steel Flat Bar, 144" length. This bar conforms to ASTM A108 and offers excellent machinability (70% rating) and weldability. With a tensile strength of 63,800 PSI, a smooth, scale-free surface, and tight dimensional tolerances, it is ideal for base plates, structural bracing, and machine ways. In stock for same-day Los Angeles pickup. Learn More

3" x 3/4" 1018 Cold Rolled Steel Flat Bar, 144" length. Conforms to ASTM A108. Features a smooth, scale-free surface, tight tolerances, and excellent machinability. With 63,800 PSI tensile strength, it's ideal for base plates, brackets, and fixtures. This medium-width bar provides robust structural support for fabrication and machinery projects. In stock Los Angeles. Learn More

A 7/16" diameter 6061-T6 Aluminum Round Bar, 144" long. Conforms to ASTM B211 and delivers 45,000 PSI tensile strength. This versatile alloy combines excellent machinability, superior corrosion resistance, and good weldability. The small diameter is ideal for creating precision turned parts, fastener blanks, dowels, and custom brackets. In stock for immediate Los Angeles pickup. Learn More

3" x 1/4" 6061-T6 Aluminum Flat Bar, 144" length. Conforms to ASTM B211 with a tensile strength of 45,000 PSI. This versatile grade combines high strength, good workability, and excellent corrosion resistance. This medium-width bar is ideal for structural bracing, machine ways, base plates, and custom fabricated parts. In stock for immediate Los Angeles pickup. Learn More

This 1" x 3/8" 6061-T6 Aluminum Flat Bar is a versatile, heat-treatable grade conforming to ASTM B211. It provides a high strength-to-weight ratio with 45,000 PSI tensile strength, good machinability, and excellent corrosion resistance. This medium-sized bar is ideal for structural bracing, machine ways, base plates, and custom fabricated parts. In stock for immediate Los Angeles pickup. Learn More

1/2" OD 304 Stainless Steel Round Tube with a 0.065" wall thickness, available in 20 ft lengths. Conforming to ASTM A269, this tube offers 73,200 PSI tensile strength, excellent corrosion resistance, and superior weldability. Its small diameter is perfect for furniture frames, instrumentation lines, decorative trim, and sanitary applications requiring a clean finish. In stock for same-day Los Angeles pickup. Learn More

6061-T6 Aluminum Flat Bar measuring 1/8" thick by 3" wide in 144" lengths. This versatile, heat-treatable grade conforms to ASTM B211, offering 45,000 PSI tensile strength, good machinability, and excellent corrosion resistance. Its medium width is ideal for structural bracing, machine ways, base plates, and general fabrication projects. In stock and available for same-day pickup in Los Angeles. Learn More

This 1/2" x 2" 6061-T6 Aluminum Flat Bar offers an excellent combination of strength, corrosion resistance, and machinability. Conforming to ASTM B211, it has a tensile strength of 45,000 PSI, making it ideal for a wide range of structural applications including framing, bracing, base plates, and machined parts. In stock for same-day cutting and pickup in Los Angeles. Learn More

1/4" x 2" 6061-T6 Aluminum Flat Bar, 144" length. Conforms to ASTM B211 with 45,000 PSI tensile strength. This grade offers a versatile combination of high strength, good machinability, and excellent corrosion resistance. The medium 2" width is ideal for structural bracing, machine ways, base plates, and general fabrication projects. In stock for same-day Los Angeles pickup. Learn More

4 inch x 1/4 inch 6061-T6 Aluminum Flat Bar, 144-inch length. Conforming to ASTM B211, this versatile alloy combines 45,000 PSI tensile strength with good machinability and excellent corrosion resistance. The T6 temper provides optimal strength for structural applications. This large width is ideal for base plates, heavy structural components, and die components. In stock for immediate Los Angeles pickup. Learn More

6061-T6 Aluminum Flat Bar measuring 1/4" thick by 6" wide in a 144" length. Conforms to ASTM B211. This versatile alloy offers a combination of high strength (45,000 PSI tensile), excellent corrosion resistance, and good machinability. The large width makes it ideal for base plates, heavy structural supports, and machined components. In stock for same-day Los Angeles pickup. Learn More

6061-T6 Aluminum Flat Bar, 2" wide by 1/8" thick in a 144" length. Conforms to ASTM B211 standards, this versatile alloy combines 45,000 PSI tensile strength with good workability and excellent corrosion resistance. Its medium size is ideal for structural bracing, machine ways, mounting plates, and general fabrication projects. In stock and ready for same-day pickup in Los Angeles. Learn More

4" x 1/8" 6061-T6 Aluminum Flat Bar, 144" length. Conforms to ASTM B211, offering 45,000 PSI tensile strength, excellent weldability, and corrosion resistance. This large-width bar is ideal for structural applications, including base plates, mounting blocks, and heavy-duty brackets. Its high strength-to-weight ratio makes it a reliable alternative to steel. In stock for immediate Los Angeles pickup. Learn More

This 6061-T6 Aluminum Flat Bar measures 1 inch wide by 3/16 inch thick in a 144-inch length. Conforming to ASTM B211, it combines high strength (45,000 PSI tensile) with excellent machinability and corrosion resistance. The T6 temper indicates it is heat-treated for maximum strength. This versatile size is ideal for structural bracing, machine ways, and custom mounting plates. In stock Los Angeles. Learn More

This 6" x 1/2" 6061-T6 Aluminum Flat Bar offers an excellent combination of strength, corrosion resistance, and machinability. Conforming to ASTM B211, its 45,000 PSI tensile strength makes it ideal for heavy-duty applications. This large profile is perfect for structural components, base plates, and mounting blocks where stability and a high strength-to-weight ratio are critical. In stock for Los Angeles pickup. Learn More

1-7/8" OD x 14 Gauge Galvanized Steel Fence Post, 24-foot length. Manufactured from ASTM A500 Grade B steel tubing for structural integrity, then hot-dip galvanized for superior rust and corrosion protection. This medium-duty post offers a tensile strength of 58,000 PSI, ideal for constructing chain-link fences, security enclosures, and support structures in outdoor environments. In stock for immediate Los Angeles pickup. Learn More

This 1/4" x 8" 6061-T6 Aluminum Flat Bar is a versatile, heat-treatable grade with high strength and excellent corrosion resistance. Conforming to ASTM B211, it has a tensile strength of 45,000 PSI and offers good machinability and weldability. Its large width makes it ideal for structural applications, base plates, mounting blocks, and heavy equipment components. In stock for same-day pickup in Los Angeles. Learn More

1/2" x 3" 6061-T6 Aluminum Flat Bar, sold in 144" lengths. Conforms to ASTM B211. This versatile alloy provides 45,000 PSI tensile strength, good machinability, and excellent corrosion resistance. The T6 temper indicates it has been heat-treated for maximum strength. Its medium width is ideal for structural bracing, machine ways, base plates, and custom fabricated parts. In stock for immediate Los Angeles pickup. Learn More

This 1" x 3/4" 6061-T6 Aluminum Flat Bar offers an excellent strength-to-weight ratio and good workability. Conforming to ASTM B211, it provides 45,000 PSI tensile strength, superior corrosion resistance, and excellent weldability. This medium-width bar is ideal for structural bracing, machine ways, support brackets, and general fabrication projects. In stock and available for same-day pickup in Los Angeles. Learn More

2-1/2" NPS Schedule 40, 304 Stainless Steel Pipe, supplied in a 240-inch length. Conforming to ASTM A312, this pipe provides 73,200 PSI tensile strength and excellent corrosion resistance. Its weldability and sanitary properties make it a top choice for fluid transport. This large diameter pipe is ideal for main water lines, industrial process piping, and structural columns. In stock for immediate Los Angeles pickup. Learn More

5 inch x 1/4 inch 6061-T6 Aluminum Flat Bar, 144" length. Conforms to ASTM B211, offering a versatile combination of high strength (45,000 PSI tensile), good machinability, and excellent corrosion resistance. This large-width bar is ideal for manufacturing base plates, heavy structural components, die parts, and mounting blocks where stability and strength-to-weight ratio are critical. In stock for Los Angeles pickup. Learn More

4" x 1/2" 6061-T6 Aluminum Flat Bar, 144" length. Conforms to ASTM B211, offering a high strength-to-weight ratio with 45,000 PSI tensile strength, excellent weldability, and good machinability. The large 4" width is ideal for manufacturing base plates, heavy structural components, die components, and support braces for industrial machinery. In stock for same-day cutting and pickup in Los Angeles. Learn More

1" x 12" Hot Rolled Steel Flat Bar, available in lengths up to 20 feet. Made from A36 structural steel, it conforms to ASTM A36 specifications and offers a minimum yield strength of 36,000 PSI. This large-format bar provides excellent weldability and good machinability. It is ideal for heavy structural applications, base plates, equipment mounting, and general fabrication. In stock for immediate Los Angeles pickup. Learn More

1/2 inch OD x 0.065" wall Hot Rolled Steel Round Tube, sold in 20-foot lengths. Conforming to ASTM A500 Grade B, this structural tubing offers 58,000 PSI tensile strength and excellent weldability. Its small diameter is well-suited for light structural applications, equipment frames, machinery guards, and custom fabrication projects where strength and economy are key. In stock for Los Angeles pickup. Learn More

This 5" x 1/2" 6061-T6 Aluminum Flat Bar offers an excellent combination of strength, machinability, and corrosion resistance. Conforming to ASTM B211, it has a tensile strength of 45,000 PSI. Its large cross-section makes it a primary choice for fabricating structural components, heavy equipment base plates, die components, and support braces. Available for same-day cutting and pickup in Los Angeles. Learn More

A 3/16" x 4" Cold Rolled 1018 Steel Flat Bar, 144 inches long. Produced to ASTM A108 standards, this bar provides a tensile strength of 63,800 PSI, tight dimensional tolerances, and excellent machinability. The smooth, scale-free surface is ideal for applications requiring a clean finish. Suitable for base plates, structural components, and machine parts. In stock Los Angeles. Learn More

5/16 inch diameter 304 Stainless Steel Round Bar, 144" length. Conforms to ASTM A276 and delivers 73,200 PSI tensile strength. This versatile grade combines excellent corrosion resistance with superior weldability and good formability. Its small diameter is ideal for creating precision pins, dowels, fastener blanks, and small shafts. In stock for same-day Los Angeles pickup. Learn More

3" x 2" 1018 Cold Rolled Steel Flat Bar, 144" length. Conforms to ASTM A108 with 63,800 PSI tensile strength and excellent machinability. The cold drawing process provides tight dimensional tolerances and a smooth, scale-free surface. This medium-width bar is ideal for structural bracing, machine ways, base plates, and general fabrication. In stock for same-day Los Angeles pickup. Learn More

This 3/32" 6013 all-purpose welding rod is an AWS/ASME certified electrode ideal for general fabrication. Designed for a stable arc on AC/DC, it delivers smooth beads on mild steel. A versatile choice for MRO and light structural work. Learn More

304 Stainless Steel Flat Bar measuring 3" wide by 1/4" thick in a 144" length. Certified to ASTM A276, this versatile bar offers 73,200 PSI tensile strength, excellent corrosion resistance, and superior weldability. Its medium size is ideal for fabricating structural braces, supports, base plates, and components for food processing equipment. In stock Los Angeles. Learn More

1" x 3/8" 1018 Cold Rolled Steel Flat Bar, 144" length. Conforms to ASTM A108 with 63,800 PSI tensile strength and excellent machinability. The cold drawing process provides a smooth, scale-free surface and tight dimensional tolerances. Ideal for base plates, mounting brackets, and machine components requiring precision without extensive finishing. In stock for Los Angeles pickup. Learn More

3/16" x 1/2" 6061-T6 Aluminum Flat Bar, 144" length. Conforms to ASTM B211 with 45,000 PSI tensile strength. This grade offers a great combination of strength, good machinability, and weldability. The small profile is ideal for lightweight structural framing, mounting brackets, shims, and custom fabrication projects. In stock for immediate Los Angeles pickup. Learn More

3" x 1/8" 1018 Cold Rolled Flat Bar, 144" length. Conforms to ASTM A108. Features a smooth, scale-free surface, tight dimensional tolerances, and excellent machinability (70% of 1212). With 63,800 PSI tensile strength, it's ideal for brackets, machine ways, and base plates where precision is key. In stock and available for same-day pickup in Los Angeles. Learn More

12" x 1/2" A36 Hot Rolled Steel Flat Bar, 240" length. Conforms to ASTM A36 with a minimum yield strength of 36,000 PSI. This large-format structural bar offers excellent weldability and good machinability. Ideal for heavy-duty applications like base plates, structural supports, die components, and equipment frames. In stock for same-day Los Angeles pickup. Learn More

3" x 1/2" 304 Stainless Steel Flat Bar, 144" length. Conforms to ASTM A276. This versatile austenitic stainless offers excellent corrosion resistance and weldability with 73,200 PSI tensile strength. Its medium size is ideal for structural bracing, machine ways, wear strips, and architectural trim. In stock and ready for same-day pickup in Los Angeles. Learn More

1-5/8" OD x 0.065" wall 304 Stainless Steel Round Tube, 240" length. Meets ASTM A269 standards with a 73,200 PSI tensile strength. This versatile austenitic grade combines excellent weldability with remarkable corrosion resistance. Its medium diameter is ideal for architectural handrails, equipment frames, sanitary process lines, and decorative applications. In stock for same-day Los Angeles pickup. Learn More

1/2" x 2" 1018 Cold Rolled Flat Bar, 144" length. Conforms to ASTM A108, offering a smooth, scale-free finish and tight dimensional tolerances. With a tensile strength of 63,800 PSI and excellent machinability, it's ideal for manufacturing brackets, base plates, and machine ways where precision is required. In stock for immediate Los Angeles pickup. Learn More