Search results for: '6061 aluminum angel'

1-inch diameter Cold Rolled All Thread Rod in a 120-inch length with a zinc plated finish. This rod meets ASTM A307 Grade A strength requirements, with a base material tensile strength of 63,800 PSI. The zinc plating provides good corrosion resistance for general-purpose fastening, anchoring systems, and suspending HVAC fixtures. In stock for immediate Los Angeles pickup. Learn More

1/2" NPS Schedule 40 Galvanized Steel Pipe in 21-foot lengths. Conforms to ASTM A53 Grade B with a 60,000 PSI tensile strength. The hot-dip zinc coating provides superior corrosion resistance for outdoor and high-moisture environments. This small diameter is ideal for plumbing, non-potable water lines, conduit, and residential handrails. In stock for same-day Los Angeles pickup. Learn More

1-1/4" NPS Schedule 40 Galvanized Steel Pipe, 252" length. Conforming to ASTM A53 Grade B, this pipe provides a minimum 60,000 PSI tensile strength and superior corrosion resistance from its hot-dip zinc coating. It is ideal for outdoor structural applications like handrails, fencing, and scaffolding, as well as for plumbing and fluid conveyance. In stock Los Angeles. Learn More

1-1/2" NPS Schedule 40 Galvanized Steel Pipe, sold in 21-foot (252") lengths. Conforming to ASTM A53 Grade B, this pipe provides a minimum 60,000 PSI tensile strength and superior corrosion resistance from its zinc coating. Its versatile size is ideal for plumbing mains, structural handrails, fence posts, and other outdoor applications requiring durability. In stock Los Angeles. Learn More

6-inch Nominal Pipe Size (NPS) Schedule 40 Galvanized Pipe, 252-inch length. Conforms to ASTM A53 Grade B, delivering 60,000 PSI tensile strength and excellent weldability. The hot-dip zinc coating provides superior corrosion resistance for outdoor and high-moisture environments. Large diameter is ideal for main water lines, industrial process piping, and heavy structural columns. In stock Los Angeles. Learn More

24 Gauge Galvanized Steel B-Deck measuring 36 inches wide by 120 inches long. This structural panel conforms to ASTM A653, providing excellent corrosion resistance from its protective zinc coating. With a high strength-to-weight ratio, it is an economical solution for roofing, siding, and floor decking systems. Ideal for residential, commercial, and agricultural construction. In stock for immediate Los Angeles pickup. Learn More

26 Gauge Galvanized Steel PBR (Purlin Bearing Rib) Sheet, measuring 36 inches wide by 96 inches long. Conforms to ASTM A653, offering excellent corrosion resistance from its protective zinc coating. The base steel provides a minimum 36,000 PSI yield strength for structural integrity. Ideal for residential roofing, commercial siding, and agricultural building applications. In stock and ready for pickup in Los Angeles. Learn More

11 Gauge (0.120") x 48" x 120" Galvanized Steel Sheet. This product conforms to ASTM A653 standards, providing excellent corrosion resistance through a protective hot-dip zinc coating. It combines the strength and formability of steel with superior durability for outdoor or high-moisture environments. Ideal for roofing, HVAC, automotive panels, and general fabrication. In stock for Los Angeles pickup. Learn More

16 Gauge (0.060") thick Galvanized Steel Sheet, 48" x 120". Conforms to ASTM A653 standards, featuring a protective zinc coating for excellent corrosion resistance in outdoor or high-moisture environments. This versatile thickness is ideal for HVAC ductwork, electrical enclosures, flashing, and light-duty fabrication. Combines the strength of steel with superior rust protection. In stock for Los Angeles pickup. Learn More

20 Gauge Galvanized Steel Sheet, 48" x 120" (4' x 10'). Conforms to ASTM A653, featuring a protective zinc coating for excellent corrosion resistance in outdoor environments. This thin gauge sheet is ideal for forming brackets, electronic enclosures, decorative panels, and HVAC ductwork. It combines the strength of steel with the durability of galvanization. In stock for immediate Los Angeles pickup. Learn More

1" x 1" Galvanized Steel Square Tube with a 16 gauge wall, sold in a 24-foot length. Conforming to ASTM A500 Grade B, this structural tubing provides a minimum yield strength of 46,000 PSI. The hot-dip galvanized zinc coating delivers excellent corrosion and rust resistance, making it ideal for outdoor frames, trailers, and gates. In stock for Los Angeles pickup. Learn More

2" x 2" Galvanized Steel Square Tube with a 16 gauge wall, 24-foot length. Conforms to ASTM A500 Grade B with 58,000 PSI tensile strength. The hot-dip galvanized zinc coating provides excellent corrosion resistance for outdoor applications. This medium-sized tube is ideal for fabricating trailer frames, gate frames, and structural supports. In stock for Los Angeles pickup. Learn More

A36 Hot Rolled Steel Angle measuring 4" x 3" legs with a 3/8" thickness. Conforming to ASTM A36, this angle iron offers a minimum yield strength of 36,000 PSI and excellent weldability for robust joints. Its large size is ideal for heavy structural applications, building frames, industrial supports, and equipment manufacturing. In stock for immediate cutting and pickup in Los Angeles. Learn More

A36 Hot Rolled Steel Angle measuring 6" x 6" with a 3/8" thickness. This structural shape conforms to ASTM A36 standards, delivering a minimum yield strength of 36,000 PSI and excellent weldability for robust joints. Its large size is ideal for heavy-duty applications including building frames, industrial equipment bases, and trailer manufacturing. In stock for Los Angeles pickup. Learn More

6" x 6" x 1/2" A36 Hot Rolled Steel Angle, supplied in a 20-foot (240") length. Conforming to ASTM A36, this structural angle offers a minimum yield strength of 36,000 PSI and excellent weldability. The large profile is ideal for heavy structural applications, building frames, industrial supports, and heavy equipment manufacturing. In stock for immediate cutting and pickup in Los Angeles. Learn More

1/2 inch Nominal Pipe Size (NPS) Hot Rolled Black Pipe with a Schedule 40 wall. This product conforms to ASTM A53 Grade B specifications, providing 60,000 PSI tensile strength and excellent weldability. The small diameter is ideal for plumbing, natural gas lines, compressed air systems, and light structural applications like handrails. Standard uncoated 'black' finish. In stock for Los Angeles pickup. Learn More

1 Inch Schedule 40 Hot Rolled Black Pipe, sold in 21-foot lengths. Manufactured to ASTM A53 Grade B standards, it offers 60,000 PSI tensile strength and excellent weldability. This medium-sized pipe is ideal for natural gas lines, fire sprinkler systems, scaffolding, and general structural fabrication. An economical choice for fluid conveyance and support applications. In stock for Los Angeles pickup. Learn More

2 inch Schedule 40 Hot Rolled Black Pipe. Conforms to ASTM A53 Grade B standards, offering 60,000 PSI tensile strength and excellent weldability for strong, reliable joints. This medium-sized pipe is ideal for plumbing mains, HVAC piping, fire sprinkler systems, and structural applications like handrails and support posts. In stock and ready for same-day pickup in Los Angeles. Learn More

5" Nominal Pipe Size (NPS) Hot Rolled Black Pipe with a Schedule 40 wall. This A53 Grade B steel pipe offers a minimum tensile strength of 60,000 PSI and excellent weldability. Its large diameter and robust wall thickness make it ideal for high-flow fluid transfer, main water lines, industrial process piping, and heavy-duty structural columns. In stock for Los Angeles pickup. Learn More

A36 Hot Rolled Steel Channel, size C6 x 8.2, measuring 6" high with a 1.920" flange and 0.200" web thickness, in 20-foot lengths. Conforming to ASTM A36, this structural channel provides 36,000 PSI minimum yield strength and excellent weldability. Its robust profile is ideal for equipment frames, structural supports, and general fabrication projects. In stock for Los Angeles pickup. Learn More

A36 Hot Rolled Steel Channel, size C10 x 15.3 (10" depth, 15.3 lbs/ft). Standard 20-foot (240") length. Conforms to ASTM A36, providing 36,000 PSI minimum yield strength and excellent weldability. This large structural channel is ideal for equipment manufacturing, trailer frames, and building supports where robust load-bearing capacity is required. In stock for immediate Los Angeles pickup. Learn More

A36 Hot Rolled Steel Channel, designated C12 x 20.7, with a 12" depth and weighing 20.7 lbs/ft. Conforms to ASTM A36 standards. Delivers a minimum yield strength of 36,000 PSI and excellent weldability. This large structural channel is ideal for building frames, heavy equipment bases, trailer chassis, and industrial supports. In stock for same-day cutting and pickup in Los Angeles. Learn More

C12 x 30.0 Hot Rolled Steel Channel, measuring 12" in height, 3.170" flange width, and 0.510" web thickness. This A36 structural channel conforms to ASTM A36 and provides a minimum yield strength of 36,000 PSI with excellent weldability. Its large profile is ideal for heavy-duty structural framing, equipment bases, and trailer chassis. In stock for immediate Los Angeles pickup or delivery. Learn More

12 Gauge Hot Rolled Diamond Plate, 48" x 120" sheet. Made from A36 structural steel conforming to ASTM A786 pattern standards. Features 58,000-80,000 PSI tensile strength, excellent weldability, and a raised pattern for maximum slip resistance. This medium-thickness plate is ideal for industrial flooring, ramps, truck beds, and stair treads. In stock for same-day Los Angeles pickup. Learn More

3-1/2" x 1/4" Hot Rolled Steel Flat Bar, 240" length. Conforms to ASTM A36 with 36,000 PSI minimum yield strength and excellent weldability. This low carbon steel is easy to fabricate using common structural methods. Its large width makes it ideal for base plates, heavy structural components, and trailer frames where strength and durability are required. In stock Los Angeles. Learn More

6" x 1/4" A36 Hot Rolled Steel Flat Bar, sold in 240" (20 ft) lengths. Conforming to ASTM A36, this structural steel offers a minimum yield strength of 36,000 PSI and excellent weldability. The large 6-inch width is ideal for manufacturing machinery base plates, heavy structural braces, and trailer frame components. In stock for same-day Los Angeles pickup. Learn More

A36 Hot Rolled Steel Flat Bar, 1" wide by 3/8" thick in a 240-inch length. This general-purpose structural steel conforms to ASTM A36, offering a minimum yield strength of 36,000 PSI and excellent weldability. Its medium width is ideal for structural bracing, machine ways, support brackets, and general fabrication projects. In stock for same-day Los Angeles pickup. Learn More

A 6" x 3/8" Hot Rolled Steel Flat Bar made from structural A36 steel. Conforming to ASTM A36, it provides a minimum yield strength of 36,000 PSI and excellent weldability for general fabrication. This large-format bar is ideal for creating machinery base plates, heavy structural supports, trailer frame components, and industrial reinforcements. In stock for immediate Los Angeles pickup. Learn More

1" x 1/2" A36 Hot Rolled Steel Flat Bar, 240" length. ASTM A36 certified with a minimum yield strength of 36,000 PSI and excellent weldability. The hot rolling process gives it a scaly mill finish. This medium-sized bar is ideal for structural bracing, machine ways, support brackets, and general fabrication projects. In stock for immediate Los Angeles pickup. Learn More

A36 Hot Rolled Steel Flat Bar, 12" wide by 3/4" thick. Conforms to ASTM A36 with a minimum yield strength of 36,000 PSI. This large-format structural bar has excellent weldability and good formability, making it a versatile choice for heavy-duty fabrication. Ideal for base plates, structural supports, equipment frames, and general repairs. In stock and available for Los Angeles pickup. Learn More

5" x 10 lbs/ft Hot Rolled Steel Standard I-Beam, 20 ft length. Conforms to ASTM A36, providing a minimum yield strength of 36,000 PSI and excellent weldability for easy fabrication. Its dimensions (5" Height x 3" Flange) make it a robust choice for structural framing, machinery bases, and support girders. In stock for same-day Los Angeles pickup. Learn More

3/8" x 48" x 120" Hot Rolled Steel Plate, conforming to ASTM A36. This structural plate provides a minimum yield strength of 36,000 PSI and excellent weldability for reliable fabrication. The thick 3/8" profile is ideal for heavy-duty applications like machinery base plates, gussets, and structural supports where strength and durability are critical. In stock for immediate Los Angeles pickup. Learn More

2" x 1" x 0.065" Hot Rolled Steel Rectangular Tube. A structural grade product conforming to ASTM A500 Grade B, this tubing offers a 46,000 PSI minimum yield strength and excellent weldability. Its high strength-to-weight ratio makes it ideal for building frames, trailer construction, and industrial machinery supports. Mill scale finish. In stock for immediate Los Angeles pickup. Learn More

2" x 1" x 0.075" Hot Rolled Rectangular Steel Tube. This structural grade tubing conforms to ASTM A500 Grade B, offering a 58,000 PSI tensile strength and excellent weldability. Its rectangular profile provides superior resistance to bending and torsional stress, making it ideal for trailer frames, structural supports, and industrial machine bases. In stock for same-day Los Angeles pickup. Learn More

3" x 2" Hot Rolled Steel Rectangular Tube with a 0.120" wall thickness, sold in 20-foot lengths. This structural tubing conforms to ASTM A500 Grade B specifications, providing a minimum yield strength of 46,000 PSI. Its combination of strength, formability, and excellent weldability makes it ideal for frames, supports, and trailers. In stock for same-day Los Angeles pickup. Learn More

4" x 2" x 0.083" wall Hot Rolled Steel Rectangular Tube, 20-foot length. A structural grade product conforming to ASTM A500 Grade B with a minimum tensile strength of 58,000 PSI. This tube's high strength-to-weight ratio and excellent weldability make it ideal for building frames, trailer beds, and heavy-duty industrial supports. In stock for same-day Los Angeles pickup. Learn More

4" x 2" x 0.120" Hot Rolled Steel Rectangular Tube, conforming to ASTM A500 Grade B. This structural tubing offers a high strength-to-weight ratio with 58,000 PSI tensile strength and excellent weldability. The large profile is ideal for heavy-duty applications like building frames, trailer beds, support columns, and industrial machinery bases. In stock for same-day pickup in Los Angeles. Learn More

6" x 2" x 0.120" Hot Rolled Steel Rectangular Tube, manufactured to ASTM A500 Grade B specifications. This hollow structural section (HSS) offers a high strength-to-weight ratio with 58,000 PSI tensile strength and excellent weldability. Its large profile is ideal for heavy-duty structural applications like trailer frames, building supports, and industrial machine bases. In stock for immediate Los Angeles pickup. Learn More

3/4" OD x 0.083" wall Hot Rolled Steel Round Tube, sold in 240" (20 ft) lengths. Conforms to ASTM A500 Grade B with 58,000 PSI tensile strength and excellent weldability. This small-diameter structural tubing is ideal for lightweight frames, furniture, roll cages, and industrial supports where strength and formability are required. In stock for immediate cutting and pickup in Los Angeles. Learn More

1/4" diameter A36 Hot Rolled Steel Round bar in a 240" (20 ft) length. This general-purpose structural steel conforms to ASTM A36 and provides a minimum yield strength of 36,000 PSI. Its low carbon content ensures excellent weldability and formability. The small diameter is ideal for creating pins, dowels, concrete anchors, and custom brackets. In stock for Los Angeles pickup. Learn More

14 Gauge (48" x 120") A36 Hot Rolled Steel Sheet. Conforms to ASTM A36 with a minimum yield strength of 36,000 PSI. This versatile material offers excellent weldability and good formability, making it a cost-effective choice for various applications. Ideal for structural panels, machine guards, trailer frames, and general fabrication projects. In stock for same-day Los Angeles pickup. Learn More

1-1/4" x 0.120" wall Hot Rolled Steel Square Tube, 240" length. Conforms to ASTM A500 Grade B, with 46,000 PSI minimum yield strength and excellent weldability. This medium-sized structural tubing offers a high strength-to-weight ratio, making it ideal for trailer frames, equipment bases, roll cages, and general fabrication projects. In stock for immediate pickup in Los Angeles. Learn More

3" x 3" Hot Rolled Steel Square Tube with a 0.083" wall thickness, available in 240" lengths. This A500 Grade B structural tubing offers a minimum yield strength of 46,000 PSI and excellent weldability. Its high strength-to-weight ratio makes it ideal for structural frames, equipment bases, trailer manufacturing, and general fabrication projects. In stock for same-day pickup in Los Angeles. Learn More

4" x 4" x 0.250" wall Hot Rolled Steel Square Tube, 20-foot length. Conforms to ASTM A500 Grade B with 46,000 PSI minimum yield strength. This large-format structural tubing, often called HSS, offers an excellent strength-to-weight ratio and superior weldability. Ideal for heavy structural frames, industrial supports, building columns, and trailer manufacturing. In stock for Los Angeles pickup. Learn More

1/2" x 1/2" A36 Hot Rolled Steel Square Bar, 240" length. Conforms to ASTM A36 with 36,000 PSI minimum yield strength and excellent weldability. Its balance of strength and cost-effectiveness makes it a foundational material for fabrication. The medium 1/2" size is ideal for equipment frames, support braces, and structural repairs. In stock for Los Angeles pickup. Learn More

A 3-inch diameter heavy-duty hitch ball constructed from solid, hot-forged steel for maximum strength and durability. The corrosion-resistant chrome-plated finish ensures reliable performance in demanding weather conditions. This large ball size is engineered for gooseneck couplers and heavy industrial trailers, providing a secure connection for your most substantial loads. In stock for immediate Los Angeles pickup. Learn More

2" x 2" x 1/4" Type 304 Stainless Steel Angle, 240" length. Conforms to ASTM A276, offering excellent corrosion resistance and weldability with 73,200 PSI tensile strength. This versatile, medium-sized angle is ideal for structural framing, equipment bases, shelving, and architectural trim where both strength and a clean finish are required. In stock for immediate Los Angeles pickup or delivery. Learn More

A 2" x 11 gauge Galvanized Square Tube, available in 24-foot lengths. Manufactured from ASTM A500 Grade B steel, this tube provides a minimum yield strength of 46,000 PSI for structural applications. The hot-dip galvanized zinc coating delivers superior corrosion resistance for outdoor use. Ideal for trailer frames, gates, handrails, and structural supports. In stock in Los Angeles. Learn More

This 3/4" x 3/4" x 1/8" hot rolled steel angle is a versatile structural shape conforming to ASTM A36 specifications. It offers a minimum yield strength of 36,000 PSI and excellent weldability, making it easy to fabricate. The small profile is ideal for light structural framing, equipment guards, mounting brackets, and custom fabrication projects. In stock for Los Angeles pickup. Learn More

1-1/2" x 1-1/2" x 3/16" Hot Rolled Steel Angle conforming to ASTM A36. This general-purpose structural steel provides a minimum 36,000 PSI yield strength and excellent weldability. The medium size is ideal for equipment frames, support bracing, heavy-duty shelving, and general fabrication. In stock and ready for same-day pickup or delivery in Los Angeles. Learn More

3-1/2" x 3-1/2" x 1/4" A36 Hot Rolled Steel Angle, 240" length. Conforms to ASTM A36 with a minimum yield strength of 36,000 PSI and excellent weldability. This large structural angle is ideal for heavy-duty applications like building frames, industrial supports, and equipment bases where strength and rigidity are critical. In stock for immediate Los Angeles pickup. Learn More

A36 Hot Rolled Steel Angle measuring 5" x 3" legs with a 1/2" thickness, supplied in a 240" (20 ft) length. This structural angle meets ASTM A36 standards, offering a minimum yield strength of 36,000 PSI and excellent weldability. Its large dimensions provide substantial load-bearing capacity for heavy structural framing, equipment bases, and industrial supports. In stock Los Angeles. Learn More

A36 Hot Rolled Steel Angle with 6" x 6" legs, 5/16" thickness, and a 240" length. Conforming to ASTM A36, this structural angle provides a minimum yield strength of 36,000 PSI and excellent weldability for demanding applications. Its large profile makes it ideal for heavy structural frames, building columns, equipment bases, and industrial supports. In stock for immediate Los Angeles pickup. Learn More

3" Nominal Pipe Size (NPS) Hot Rolled Black Pipe with a Schedule 40 wall. Conforming to ASTM A53 Grade B, this carbon steel pipe offers 60,000 PSI tensile strength and excellent weldability for fabrication. Its large diameter is suited for main fluid lines, industrial process piping, and structural applications like columns and heavy supports. In stock for Los Angeles pickup. Learn More

3/16" thick Hot Rolled Diamond Plate, available in 4' x 10' sheets. Produced from A36 structural steel and conforming to ASTM A786 standards for pattern, this plate provides maximum skid resistance. With a tensile strength of 58,000 PSI and excellent weldability, it is ideal for industrial flooring, ramps, truck beds, and stair treads. In stock for Los Angeles pickup. Learn More

A36 Hot Rolled Steel Flat Bar measuring 1-1/4" wide by 3/16" thick. This versatile structural steel conforms to ASTM A36 and offers a minimum yield strength of 36,000 PSI. Its excellent weldability and formability make it a top choice for general fabrication, structural bracing, and industrial repairs. In stock for immediate cutting and pickup in Los Angeles. Learn More

2" x 1/4" A36 Hot Rolled Steel Flat Bar, sold in 240" (20 ft) lengths. A versatile and economical structural steel conforming to ASTM A36, it has a minimum yield strength of 36,000 PSI and excellent weldability. This medium-width bar is ideal for structural bracing, equipment frames, base plates, and general fabrication projects. In stock for Los Angeles pickup. Learn More

4" x 1/4" A36 Hot Rolled Steel Flat Bar, 240" length. ASTM A36 compliant with 36,000 PSI minimum yield strength. Features excellent weldability and formability for general structural use. This large-format bar is ideal for heavy applications like base plates, equipment mounting, and frame components where strength and cost-effectiveness are critical. In stock for immediate Los Angeles pickup. Learn More

2-1/2" x 3/8" Hot Rolled A36 Steel Flat Bar. This structural grade steel conforms to ASTM A36 and offers excellent weldability and good machinability. With a tensile strength of 58,000-80,000 PSI, it's ideal for manufacturing, construction, and industrial repair. Its medium size is suited for structural bracing, equipment frames, and base plates. In stock for Los Angeles pickup. Learn More

4 Inch by 3/8 Inch Hot Rolled Steel Flat Bar, 240-inch length. Conforms to ASTM A36 specifications, providing 36,000 PSI minimum yield strength and excellent weldability for structural applications. This large-format bar is ideal for manufacturing base plates, heavy structural supports, die components, and general fabrication projects. In stock and ready for same-day pickup in Los Angeles. Learn More

6" x 1/2" A36 Hot Rolled Steel Flat Bar, 240" length. Conforms to ASTM A36 with 36,000 PSI minimum yield strength and excellent weldability. This large-format structural bar provides robust support for heavy-duty applications. Its size is ideal for base plates, heavy structural components, die components, and trailer frames. In stock for immediate cutting and pickup in Los Angeles. Learn More

1/4" x 48" x 120" A36 Hot Rolled Steel Plate, compliant with ASTM A36 standards. This structural plate offers a guaranteed minimum yield strength of 36,000 PSI, excellent weldability, and good formability. Its medium thickness is ideal for structural panels, machinery guards, gussets, and general fabrication projects where strength and economy are key. In stock for same-day Los Angeles pickup. Learn More

2" x 1" Hot Rolled Steel Rectangular Tube with a 0.120" wall, supplied in 20-foot lengths. This structural tubing conforms to ASTM A500 Grade B, offering 58,000 PSI tensile strength and excellent weldability. Its combination of strength and formability makes it ideal for structural frames, trailer beds, support columns, and industrial fabrication projects. In stock for same-day pickup in Los Angeles. Learn More

3" x 1-1/2" x 0.083" wall Hot Rolled Steel Rectangular Tube, conforming to ASTM A500 Grade B. This structural tubing offers a minimum 58,000 PSI tensile strength, excellent weldability, and a high strength-to-weight ratio. Its dimensions make it ideal for fabricating equipment frames, trailer cross-members, and support columns. In stock for immediate cutting and pickup in Los Angeles. Learn More

3" x 1-1/2" Hot Rolled Steel Rectangular Tube with a 0.188" wall thickness. Conforms to ASTM A500 Grade B, offering 58,000 PSI tensile strength and excellent weldability. This hollow structural section (HSS) is ideal for trailer frames, building supports, and industrial machine bases where strength against bending and torsion is required. In stock for immediate Los Angeles pickup. Learn More

3" x 2" x 0.065" wall, 20 ft length Hot Rolled Steel Rectangular Tube. Conforms to ASTM A500 Grade B with 58,000 PSI tensile strength. This structural tube offers an excellent strength-to-weight ratio and is easily welded. Ideal for building frames, trailer cross-members, and machinery supports where robust performance is required. In stock for immediate Los Angeles pickup. Learn More

3" x 2" x 0.188" wall Hot Rolled Steel Rectangular Tube, manufactured to ASTM A500 Grade B specifications. This structural grade tubing offers a high strength-to-weight ratio with 58,000 PSI tensile strength and excellent weldability. Its dimensions make it ideal for fabricating structural frames, trailer beds, support columns, and machine bases. Ready for same-day cutting and pickup in Los Angeles. Learn More

6" x 2" Hot Rolled Steel Rectangular Tube with a 0.188" (3/16") wall thickness. This A500 Grade B structural tubing meets ASTM A500 specifications and provides a minimum yield strength of 46,000 PSI. Its high strength-to-weight ratio makes it ideal for building frames, trailer manufacturing, and heavy equipment supports. In stock for same-day Los Angeles pickup. Learn More

6" x 4" Hot Rolled Steel Rectangular Tube with a 0.250" wall thickness, available in 20 ft lengths. This structural tubing conforms to ASTM A500 Grade B, offering a tensile strength of 58,000 PSI and excellent weldability. Its high strength-to-weight ratio makes it ideal for structural frames, equipment bases, and trailer construction. In stock for same-day pickup in Los Angeles. Learn More

6" x 0.375" A500 Grade B Hot Rolled Steel Square Tube, sold in 240" lengths. Conforming to ASTM A500, this structural tubing provides 58,000 PSI tensile strength and excellent weldability. Its large profile and thick wall make it ideal for heavy-duty structural applications, including building frames, industrial supports, and heavy equipment bases. In stock for immediate Los Angeles pickup. Learn More

The Eagle-1 is a complete slide gate operator kit for residential applications. Its powerful 1/2 HP continuous-duty motor handles gates up to 18 feet and 300 lbs. This easy-to-install package includes two wireless remotes and a monitored reflective photo eye for enhanced security and safety. Ideal for automating driveway gates with reliable performance. In stock Los Angeles. Learn More

A36 Hot Rolled Steel Angle measuring 1-1/4" x 1-1/4" legs with a 1/8" thickness. Conforming to ASTM A36, this versatile structural angle offers a minimum yield strength of 36,000 PSI and excellent weldability. Its small profile is perfect for light-duty framing, custom brackets, equipment guards, and general fabrication projects. In stock for immediate Los Angeles pickup. Learn More

2" x 2" x 3/16" A36 Hot Rolled Steel Angle in 20-foot lengths. Conforming to ASTM A36, this structural angle provides a minimum 36,000 PSI yield strength and excellent weldability for fabrication. Its versatile medium size is ideal for structural framing, equipment bases, industrial shelving, and general repairs. In stock and available for same-day pickup in Los Angeles. Learn More

A36 Hot Rolled Steel Channel measuring 1" wide x 1/2" high x 1/8" thick in 20-foot lengths. This general-purpose structural steel conforms to ASTM A36 and provides a minimum yield strength of 36,000 PSI. Its excellent weldability and formability make it ideal for light structural applications, equipment frames, trailer components, and mounting brackets. In stock for Los Angeles pickup. Learn More

#3 (3/8") Grade 60 Hot Rolled Rebar, 20-foot length. Meets ASTM A615 specifications and features a minimum yield strength of 60,000 PSI and a deformed surface for superior mechanical bond with concrete. This standard reinforcing bar is essential for adding tensile strength to foundations, slabs-on-grade, and retaining walls. In stock for same-day Los Angeles pickup. Learn More

The Eagle-1000 FR is a robust 1/2 HP slide gate operator designed for residential and light commercial applications. It handles gates up to 27 feet and 600 lbs with a continuous duty motor. This complete kit includes two remotes, a receiver, and a photo eye safety monitor for a secure and convenient access control solution. In stock for same-day pickup in Los Angeles. Learn More

1/8" diameter 303 Stainless Steel Round Bar in 144" lengths. Certified to ASTM A582, this free-machining grade offers 90,000 PSI tensile strength and excellent machinability for high-speed production. The sulfur content ensures superior chip breaking and a fine surface finish. This small diameter is ideal for pins, dowels, fastener blanks, and precision screw machine parts. In stock for Los Angeles pickup. Learn More

3/4" x 1/4" Type 304 Stainless Steel Flat Bar, 144" length. Conforms to ASTM A276 and offers a balance of strength and excellent corrosion resistance. With 73,200 PSI tensile strength and superior weldability, this versatile bar is ideal for manufacturing structural brackets, braces, and food processing equipment components. Its clean mill finish is also suitable for architectural trim. In stock for Los Angeles pickup. Learn More

1-1/4" x 1/2" 304 Stainless Steel Flat Bar, 144" length. Conforming to ASTM A276, this austenitic stainless offers 73,200 PSI tensile strength, excellent weldability, and superior corrosion resistance. Its versatile rectangular profile is ideal for structural bracing, equipment framework, and architectural trim. This medium-width bar is a durable choice for food processing and general fabrication. In stock for Los Angeles pickup. Learn More

1/4 inch diameter Cold Rolled All Thread Rod with a zinc plated finish for corrosion resistance. Continuous threading along its 120-inch length provides versatile fastening. Made from low-carbon steel conforming to ASTM A307 strength requirements, it offers 63,800 PSI tensile strength. Ideal for light-duty bracing, suspending conduit, and creating custom-length fasteners. In stock for same-day Los Angeles pickup. Learn More

18 Gauge (0.0478") 1018 Cold Rolled Steel Sheet, 48" wide by 120" long. This material offers a smooth, scale-free surface, superior dimensional tolerance, and excellent formability for bending and stamping. With good weldability and 63,800 PSI tensile strength, it is a versatile choice for applications requiring a precise, paint-ready surface, such as electronic enclosures and automotive panels. In stock for Los Angeles pickup. Learn More

24 Gauge Galvanized B-Deck sheet, measuring 36" x 72". Conforming to ASTM A653, this structural panel features a protective zinc coating for excellent corrosion resistance. The base steel offers a minimum yield strength of 36,000 PSI. Ideal for roofing, floor decking, and siding in commercial and residential construction. Lightweight yet strong, it provides a durable, low-maintenance solution. In stock for Los Angeles pickup. Learn More

A36 Hot Rolled Steel Channel, C6 x 13 size, measuring 6" in depth with a 2.157" flange and weighing 13 lbs/ft. Conforming to ASTM A36, this structural channel offers a minimum yield strength of 36,000 PSI and excellent weldability. Its large size is ideal for equipment frames, structural supports, trailer frames, and general fabrication projects requiring robust performance. In stock for Los Angeles pickup. Learn More

A36 Hot Rolled Steel Flat Bar, 8" wide by 1/4" thick in a 240" length. This structural bar meets ASTM A36 standards and offers a minimum yield strength of 36,000 PSI with excellent weldability. The large width makes it ideal for heavy structural applications, including base plates for columns and machinery, support braces, and frame components. In stock for same-day Los Angeles pickup. Learn More

10 inch by 1/2 inch A36 Hot Rolled Steel Flat Bar, available in 20-foot lengths. This structural steel conforms to ASTM A36 specifications, providing a minimum yield strength of 36,000 PSI and excellent weldability. Its large width makes it an ideal choice for heavy-duty applications such as machinery base plates, structural supports, die components, and trailer frames. In stock for Los Angeles pickup. Learn More

1-1/4" x 0.065" Hot Rolled Steel Square Tube, 20-foot length. This A500 Grade B structural tubing conforms to ASTM A500 and provides a minimum yield strength of 46,000 PSI. With excellent weldability and a high strength-to-weight ratio, it's ideal for manufacturing trailer frames, equipment bases, roll cages, and general structural supports. In stock for immediate pickup in Los Angeles. Learn More

This 6-inch V-Groove wheel is engineered for heavy-duty sliding gates, industrial doors, and material handling systems running on inverted angle iron track. Its durable steel construction ensures high load capacity and smooth operation. The 6-inch diameter provides stability for large gates and spans uneven surfaces effectively. Ideal for fabricators and installers requiring reliable gate hardware. In stock for Los Angeles pickup. Learn More

1" x 1" x 3/16" 304 Stainless Steel Angle in a 240-inch length. Conforming to ASTM A276, this material provides excellent corrosion resistance and weldability with a tensile strength of 73,200 PSI. Its small profile is ideal for light structural support, custom brackets, architectural trim, and equipment framing where both strength and a clean finish are required. In stock for immediate Los Angeles pickup. Learn More

1-1/4" x 1-1/4" x 1/8" 304 Stainless Steel Angle, sold in 20 ft (240") lengths. This versatile angle conforms to ASTM A276 and provides 73,200 PSI tensile strength, excellent corrosion resistance, and superior weldability. Its small profile is ideal for light structural framing, manufacturing equipment guards, support brackets, and architectural trim. In stock and available for same-day pickup in Los Angeles. Learn More

This 1-1/2" x 3/16" 304 Stainless Steel Angle offers excellent corrosion resistance and weldability for structural applications. Conforming to ASTM A276, it provides 73,200 PSI tensile strength. Its versatile 1-1/2" leg size is ideal for medium-duty structural framing, equipment bases, shelving, and architectural trim where both strength and a clean finish are required. In stock for immediate Los Angeles pickup. Learn More

3/16" x 1-1/2" 304 Stainless Steel Flat Bar in a 144" length. Conforming to ASTM A276, this versatile bar offers excellent corrosion resistance, high ductility, and superior weldability. Its 73,200 PSI tensile strength makes it ideal for structural bracing, machine ways, and equipment framework. This medium-width bar is a popular choice for fabrication projects. In stock for Los Angeles pickup. Learn More

4" x 3/16" 304 Stainless Steel Flat Bar in 144" lengths. Conforming to ASTM A276, this versatile alloy offers 73,200 PSI tensile strength, excellent corrosion resistance, and superior weldability. Its large width is ideal for manufacturing base plates, heavy structural supports, die components, and durable braces where strength and longevity are critical. In stock and ready for same-day pickup in Los Angeles. Learn More

1-1/4" wide by 1/4" thick 304 Stainless Steel Flat Bar, sold in 144" lengths. This austenitic chromium-nickel alloy complies with ASTM A276 and has a tensile strength of 73,200 PSI. It combines excellent weldability with remarkable corrosion resistance. Its medium size is ideal for structural bracing, equipment framework, and general fabrication projects. In stock for same-day Los Angeles pickup. Learn More

1018 Cold Rolled Steel Flat Bar, 1-1/2" wide by 1/8" thick in 144" lengths. Conforming to ASTM A108, this bar offers a tensile strength of 63,800 PSI, excellent machinability, and a smooth, scale-free surface. Its tight dimensional tolerances make it ideal for fabricating precision parts like mounting brackets, machine ways, and base plates. In stock for same-day Los Angeles pickup. Learn More

A 4" wide by 1/8" thick 1018 Cold Rolled Steel Flat Bar, supplied in a 144" length. This bar meets ASTM A108 standards and features 63,800 PSI tensile strength, tight dimensional tolerances, and good weldability. The cold drawn finish provides a smooth, scale-free surface ideal for machining. Its large width makes it suitable for base plates, structural supports, and die components. In stock Los Angeles. Learn More

3/4 inch Nominal Pipe Size (NPS) Schedule 40 Galvanized Steel Pipe, 21 ft length. Manufactured to ASTM A53 Grade B specifications, this pipe offers a minimum tensile strength of 60,000 PSI and superior corrosion resistance from its hot-dip zinc coating. Ideal for outdoor structures, non-potable water plumbing, handrails, and fencing. In stock and available for same-day pickup in Los Angeles. Learn More

26 Gauge Galvanized Steel PBR Panel, measuring 36 inches wide by 288 inches (24 feet) long. Produced to ASTM A653 standards, this panel offers excellent corrosion resistance from its protective zinc coating. The PBR (Purlin Bearing Rib) profile provides structural strength, making it ideal for roofing, siding, and agricultural building applications where durability and weather resistance are required. In stock for Los Angeles pickup. Learn More

A36 Hot Rolled Steel Angle, measuring 1-3/4" x 1-3/4" with a 1/8" thickness. This structural angle conforms to ASTM A36 specifications and provides a minimum yield strength of 36,000 PSI. Its excellent weldability and formability make it ideal for manufacturing equipment frames, structural bracing, support brackets, and general fabrication projects. In stock and ready for same-day pickup in Los Angeles. Learn More

4" x 3" x 1/2" A36 Hot Rolled Steel Angle, 20-foot length. A versatile structural profile conforming to ASTM A36 with a minimum yield strength of 36,000 PSI and excellent weldability. The large leg size makes it ideal for heavy structural applications, including building frames, industrial supports, and equipment manufacturing. This unequal leg angle provides robust support for load-bearing applications. In stock Los Angeles. Learn More

3/8" x 48" x 120" Hot Rolled Diamond Plate, made from A36 structural steel and conforming to ASTM A786 standards. This heavy-duty plate offers 58,000-80,000 PSI tensile strength and a raised pattern for maximum skid resistance. Its substantial thickness makes it ideal for industrial flooring, heavy equipment ramps, trench covers, and structural walkways. In stock for same-day Los Angeles pickup. Learn More