Search results for: 'round metsl pipes 5 inches'

1-1/4" x 1/2" A36 Hot Rolled Steel Flat Bar, sold in 240-inch (20 ft) lengths. This structural steel conforms to ASTM A36 and provides a minimum yield strength of 36,000 PSI. Its excellent weldability and formability make it a versatile choice for general fabrication. This medium-width bar is ideal for structural bracing, equipment frames, and base plates. In stock for Los Angeles pickup. Learn More

This 10" x 1/8" x 1" abrasive cut-off wheel is engineered for high-speed metal cutting applications. Featuring fiberglass reinforcement for durability and safety, it is fully compliant with ANSI B7.1 standards. Designed for tools operating at or below a maximum speed of 6,100 RPM. Learn More

A36 Hot Rolled Steel Flat Bar, 1-1/2" wide by 3/16" thick, in 240-inch lengths. Conforms to ASTM A36 with 36,000 PSI minimum yield strength. This low-carbon steel offers excellent weldability and good formability. As a medium-width bar, it is ideal for structural bracing, equipment frames, base plates, and general fabrication projects. In stock for immediate Los Angeles pickup. Learn More

3/4" x 1/4" A36 Hot Rolled Steel Flat Bar, sold in 240-inch (20-foot) lengths. Conforms to ASTM A36 with a minimum yield strength of 36,000 PSI. This versatile and economical steel bar offers excellent weldability and formability. Its small profile is ideal for manufacturing support brackets, straps, shims, and general fabrication projects. In stock for same-day Los Angeles pickup. Learn More

A versatile 2 Inch by 3/8 Inch 304 Stainless Steel Flat Bar, 144 inches long. This bar meets ASTM A276 standards and offers an excellent combination of corrosion resistance, strength, and weldability with a tensile strength of 73,200 PSI. Its medium width makes it ideal for structural bracing, machine ways, framework, and food processing equipment. Available for same-day pickup in Los Angeles. Learn More

1/2" x 1/2" A36 Hot Rolled Steel Square Bar, 240" length. Conforms to ASTM A36 with 36,000 PSI minimum yield strength and excellent weldability. Its balance of strength and cost-effectiveness makes it a foundational material for fabrication. The medium 1/2" size is ideal for equipment frames, support braces, and structural repairs. In stock for Los Angeles pickup. Learn More

This industrial-grade construction adhesive provides a high-strength bond for a wide range of materials. Compliant with ASTM C557 standards, it is engineered for reliability in demanding construction, fabrication, and MRO applications. Learn More

304 Stainless Steel Flat Bar, 2 inches wide by 1/4 inch thick, in a 144-inch length. This versatile bar conforms to ASTM A276, offering excellent corrosion resistance and 73,200 PSI tensile strength. Its medium size is ideal for structural bracing, equipment framework, and architectural trim. Excellent weldability and ductility make it a top choice for fabrication projects. In stock for Los Angeles pickup. Learn More

A36 Hot Rolled Steel Angle with 8-inch by 4-inch legs and 1/2-inch thickness. This structural angle conforms to ASTM A36, providing a minimum yield strength of 36,000 PSI and excellent weldability. The large profile is ideal for heavy structural applications, including building frames, industrial supports, and equipment manufacturing. It has a mill finish with a blue-gray scale. In stock for immediate Los Angeles pickup. Learn More

Protect your hands with our industrial-grade Goat Leather Driving Gloves. These gloves are rated to ANSI/ISEA 105 standards, providing excellent dexterity and durability for material handling. The premium goat leather construction ensures a comfortable fit and reliable protection for MRO and fabrication tasks. Learn More

1" diameter Cold Rolled All Thread Rod in 120" (10 ft) lengths. Made from 1018 steel with an oil finish for rust prevention, this rod meets ASTM A307 Grade A strength requirements with a 60,000 PSI tensile strength. The continuous threading provides versatile fastening for construction, manufacturing, and general repair. Easily cut to custom lengths. In stock for Los Angeles pickup. Learn More

12 inch by 3/8 inch A36 Hot Rolled Steel Flat Bar, 240-inch length. Conforms to ASTM A36 with 36,000 PSI minimum yield strength and excellent weldability. This large-format structural bar is ideal for heavy-duty applications like base plates, structural supports, die components, and equipment frames where strength and rigidity are critical. In stock Los Angeles. Learn More

304 Stainless Steel Flat Bar with a 3-inch width and 1/8-inch thickness, sold in 144-inch lengths. Conforming to ASTM A276, this bar provides 73,200 PSI tensile strength, excellent corrosion resistance, and superior weldability. Its versatile size is ideal for structural braces, equipment framework, base plates, and general fabrication projects. In stock for immediate pickup in Los Angeles. Learn More

6 inch by 3/4 inch 6061-T6 Aluminum Flat Bar, sold in 144-inch lengths. Conforming to ASTM B211, this heat-treated alloy combines 45,000 PSI tensile strength with good workability and excellent corrosion resistance. The large cross-section is ideal for manufacturing base plates, heavy structural components, die components, and mounting blocks for industrial equipment. In stock for same-day Los Angeles pickup. Learn More

1-1/2" Single Lock Box constructed from durable, weldable steel. Designed for securing slide or swing gates, this hardware fits 1-1/2" square or round tubing. The weld-on design ensures a permanent, secure installation for standard gate locks. Ideal for residential, commercial, and industrial fence applications. In stock for immediate pickup in Los Angeles. Learn More

This 6061-T6 Aluminum Flat Bar measures 1 inch wide by 3/16 inch thick in a 144-inch length. Conforming to ASTM B211, it combines high strength (45,000 PSI tensile) with excellent machinability and corrosion resistance. The T6 temper indicates it is heat-treated for maximum strength. This versatile size is ideal for structural bracing, machine ways, and custom mounting plates. In stock Los Angeles. Learn More

1/2 Inch x 1 Inch 6061-T6 Aluminum Flat Bar, 144" length. Conforms to ASTM B211, offering a versatile combination of 45,000 PSI tensile strength, good machinability, and excellent corrosion resistance. This heat-treatable grade is ideal for structural framing, base plates, and machined components where strength and light weight are required. In stock for same-day Los Angeles pickup. Learn More

1 Inch x 1-1/4 Inch 6061-T6 Aluminum Flat Bar, 144" length. Conforms to ASTM B211, offering a versatile combination of high strength (45,000 PSI tensile), excellent corrosion resistance, and good machinability. This medium-sized bar is ideal for structural bracing, machine ways, base plates, and custom fabricated parts. In stock for immediate cutting and pickup in Los Angeles. Learn More

A 3/16" x 4" Cold Rolled 1018 Steel Flat Bar, 144 inches long. Produced to ASTM A108 standards, this bar provides a tensile strength of 63,800 PSI, tight dimensional tolerances, and excellent machinability. The smooth, scale-free surface is ideal for applications requiring a clean finish. Suitable for base plates, structural components, and machine parts. In stock Los Angeles. Learn More

A36 Hot Rolled Steel Square Bar measuring 3/8" x 3/8" in 20-foot lengths. Conforming to ASTM A36, this bar provides a minimum yield strength of 36,000 PSI and excellent weldability for general purpose applications. Its small profile is ideal for light framing, support brackets, railings, and industrial maintenance repairs. In stock for Los Angeles pickup. Learn More

1 inch 1018 Cold Rolled Steel Hexagon Bar, 144-inch length. Conforms to ASTM A108 standards, delivering 63,800 PSI tensile strength and excellent machinability. Its smooth finish and tight tolerances make it ideal for fasteners, nuts, hydraulic fittings, and machined components requiring a hex shape for gripping. In stock for same-day Los Angeles pickup. Learn More

Our 7-inch barrel hinges are engineered from heavy-duty, weldable carbon steel for maximum durability and strength. Designed for high-load applications, these hinges provide a smooth, reliable pivot for industrial gates and security doors. The robust construction ensures long-lasting performance in demanding MRO and fabrication environments. Learn More

This 6 inch by 3/8 inch 1018 Cold Rolled Steel Flat Bar offers tight dimensional tolerances and a smooth, scale-free surface. Conforming to ASTM A108, it has a tensile strength of 63,800 PSI and excellent machinability. Its large width makes it ideal for base plates, structural gussets, and heavy equipment mounting. In stock for Los Angeles pickup. Learn More

Our 9-inch barrel hinges are engineered from high-strength, weldable steel for superior durability. Designed for heavy-duty industrial gates, doors, and security applications, these hinges provide smooth, reliable operation. The plateless design allows for direct, clean welding to frames and posts. Learn More

4 inch x 1/4 inch 6061-T6 Aluminum Flat Bar, 144-inch length. Conforming to ASTM B211, this versatile alloy combines 45,000 PSI tensile strength with good machinability and excellent corrosion resistance. The T6 temper provides optimal strength for structural applications. This large width is ideal for base plates, heavy structural components, and die components. In stock for immediate Los Angeles pickup. Learn More

C10 x 25.0 A36 Hot Rolled Steel Channel, sold in 20-foot lengths. Conforms to ASTM A36 with a minimum yield strength of 36,000 PSI and excellent weldability. This large structural channel features a 10-inch depth and 0.526-inch web thickness, ideal for building frames, equipment supports, and trailer manufacturing. Provides robust structural performance for load-bearing applications. In stock for Los Angeles pickup. Learn More

This 7" x 1.6mm cut-off wheel features a 7/8" arbor hole, making it compatible with most standard angle grinders. Rated for a maximum speed of 8,500 RPM, this abrasive disc is engineered for fast, burr-free cutting of steel, stainless steel, and other ferrous metals. Its thin kerf design minimizes material waste and provides a clean finish. Ideal for fabrication and metalworking shops. In stock Los Angeles. Learn More

4" x 1-1/2" Hot Rolled Steel Rectangular Tube with a 0.065" wall, manufactured to ASTM A500 Grade B specifications. This structural grade tubing offers a minimum 46,000 PSI yield strength and excellent weldability, making it ideal for fabrication. Its high strength-to-weight ratio is perfect for trailer frames, structural supports, and machine bases. In stock for immediate Los Angeles pickup. Learn More

The Super Tool Press Pliers 10" are engineered from high-strength forged alloy steel for superior gripping power and durability. Designed to meet ASME B107 standards, these industrial-grade pliers are essential for demanding fabrication and MRO tasks. Learn More

3" x 3" x 3/8" Hot Rolled Steel Angle, sold in 240-inch lengths. Conforms to ASTM A36 with a minimum yield strength of 36,000 PSI. This structural angle provides excellent weldability and good machinability. Its medium size is ideal for equipment bases, structural framing, and heavy-duty shelving supports. In stock for Los Angeles pickup. Learn More

This 1/2" x 4-1/2" industrial masonry drill bit is engineered for high-performance drilling in concrete, brick, and block. It features a durable tungsten carbide tip and complies with ANSI B212.15 standards, ensuring precision and long service life for demanding applications. Learn More

Secure equipment and materials with the Regal 2” x 20ft Ratchet Cargo Lash. This industrial tie-down is made from durable polyester webbing, meets WSTDA-T-1 standards, and features a 3,335 lbs Working Load Limit (WLL) for reliable performance. Learn More

1" x 1" x 3/16" 304 Stainless Steel Angle in a 240-inch length. Conforming to ASTM A276, this material provides excellent corrosion resistance and weldability with a tensile strength of 73,200 PSI. Its small profile is ideal for light structural support, custom brackets, architectural trim, and equipment framing where both strength and a clean finish are required. In stock for immediate Los Angeles pickup. Learn More

2" x 2" x 3/16" 304 Stainless Steel Angle, available in 240-inch lengths. Conforming to ASTM A276, this angle provides 73,200 PSI tensile strength, excellent corrosion resistance, and superior weldability. Its medium size is ideal for structural framing, equipment bases, shelving, and architectural trim. A fundamental component for fabrication projects requiring both strength and a clean finish. In stock for Los Angeles pickup. Learn More

1-1/4" x 1-1/4" x 3/16" 304 Stainless Steel Angle, sold in 240-inch lengths. Conforming to ASTM A276, this versatile austenitic grade offers excellent corrosion resistance and weldability with a tensile strength of 73,200 PSI. Its small profile is ideal for creating light structural frames, mounting brackets, corner guards, and architectural trim. In stock for Los Angeles pickup. Learn More

This 3-1/2" x 1/2" Hot Rolled Steel Flat Bar is manufactured from A36 grade steel, conforming to ASTM A36 standards. It offers a minimum yield strength of 36,000 PSI and excellent weldability. As a large-dimension bar, it is ideal for heavy structural applications, base plates for machinery, die components, and robust framing supports. In stock and ready for same-day pickup in Los Angeles. Learn More

C8 x 13.75 Hot Rolled Steel Channel in 20-foot lengths. This A36 structural channel conforms to ASTM A36, offering a minimum yield strength of 36,000 PSI and excellent weldability. The 8-inch depth provides significant strength for load-bearing applications like equipment frames, vehicle chassis, and structural supports. In stock for same-day Los Angeles pickup. Learn More

2" x 2" x 14 Gauge Galvanized Square Tube, available in 20-foot lengths. Conforms to ASTM A500 Grade B with a 58,000 PSI tensile strength. The hot-dip zinc coating provides excellent corrosion resistance for outdoor applications. Ideal for structural frames, gates, trailers, and supports where strength and weather protection are critical. In stock for immediate Los Angeles pickup. Learn More

This industrial-grade Safety Yellow DTM (Direct-to-Metal) paint provides exceptional corrosion protection in a single coat. Formulated as a high-performance alkyd coating, it's engineered for durability on steel and other metal surfaces. Ideal for MRO and new fabrication projects. Learn More

1-1/2" x 1/4" 304 Stainless Steel Angle in 240-inch lengths. Conforming to ASTM A276, this versatile angle provides 73,200 PSI tensile strength, excellent corrosion resistance, and superior weldability. Its medium size is ideal for structural framing, equipment bases, shelving, and architectural trim. A non-magnetic, austenitic steel perfect for fabrication projects requiring durability and a clean finish. In stock for immediate Los Angeles pickup. Learn More

6" x 3/8" 6061-T6 Aluminum Flat Bar in 144" lengths. Conforming to ASTM B211, this heat-treated alloy combines a high strength-to-weight ratio (45,000 PSI tensile) with good machinability and excellent weldability. The large 6-inch width makes it a stable and robust choice for structural base plates, heavy equipment mounting, and general fabrication projects. In stock for Los Angeles pickup. Learn More

1/2" x 8" 6061-T6 Aluminum Flat Bar, 144" length. Conforms to ASTM B211 with 45,000 PSI tensile strength, good machinability, and excellent corrosion resistance. This versatile, heat-treatable grade offers a high strength-to-weight ratio. The large 8-inch width is ideal for structural base plates, heavy equipment mounting, die components, and large machined parts. In stock for same-day Los Angeles pickup. Learn More

8" x 1/2" A36 Hot Rolled Steel Flat Bar, 240" length. Conforms to ASTM A36 with a minimum yield strength of 36,000 PSI and excellent weldability. This large-format flat bar is ideal for manufacturing heavy structural components, base plates for machinery and columns, and general fabrication where strength and durability are critical. In stock and available for same-day pickup in Los Angeles. Learn More

An 8" x 3/16" A36 Hot Rolled Steel Flat Bar, supplied in 20-foot lengths. This structural carbon steel meets ASTM A36 standards and features a minimum yield strength of 36,000 PSI and excellent weldability. The large width makes it ideal for manufacturing base plates, heavy structural supports, frame components, and general fabrication projects. In stock for same-day Los Angeles pickup. Learn More

1-1/4" x 1-1/4" Galvanized Square Tube with a 16 gauge wall, sold in 24-foot lengths. Manufactured to ASTM A500 Grade B standards, this structural tubing has a 58,000 PSI tensile strength. The hot-dip galvanized zinc coating provides excellent corrosion resistance for outdoor applications. Ideal for structural frames, gates, trailer construction, and railings. In stock for Los Angeles pickup. Learn More

1-1/2" x 1-1/2" Galvanized Square Tube with an 11 gauge wall, in 24-foot lengths. Conforms to ASTM A500 Grade B, providing 46,000 PSI yield strength for structural use. The hot-dip galvanized zinc coating delivers superior corrosion resistance for outdoor applications. This medium-sized tube is ideal for fabricating trailer frames, gate posts, railings, and structural supports. In stock for Los Angeles pickup. Learn More

12" x 1/2" A36 Hot Rolled Steel Flat Bar, 240" length. Conforms to ASTM A36 with a minimum yield strength of 36,000 PSI. This large-format structural bar offers excellent weldability and good machinability. Ideal for heavy-duty applications like base plates, structural supports, die components, and equipment frames. In stock for same-day Los Angeles pickup. Learn More

A36 Hot Rolled Steel Flat Bar, 1-1/2" wide by 1/8" thick. This general-purpose structural steel conforms to ASTM A36 standards and offers a minimum yield strength of 36,000 PSI with excellent weldability. Its medium width is ideal for fabricating structural bracing, equipment frames, machine ways, and general repair work. Stocked in 240" (20 ft) lengths for immediate pickup in Los Angeles. Learn More

1-1/2" x 16 Gauge Galvanized Square Tube, sold in 24-foot lengths. Conforms to ASTM A500 Grade B with 58,000 PSI tensile strength. The hot-dip zinc coating provides excellent corrosion resistance for outdoor applications. Its medium size is ideal for trailer frames, gate construction, and structural supports. In stock for same-day Los Angeles pickup. Learn More

6" x 1/2" 1018 Cold Rolled Steel Flat Bar, 144" length. Conforms to ASTM A108 with 63,800 PSI tensile strength and excellent machinability. The cold drawing process provides tight dimensional tolerances and a smooth, scale-free finish. Its substantial 6-inch width makes it ideal for base plates, heavy structural components, and die sets. In stock for Los Angeles pickup. Learn More

1-1/4" x 3/8" A36 Hot Rolled Steel Flat Bar, sold in 20-foot (240") lengths. Conforms to ASTM A36 specifications, providing a minimum yield strength of 36,000 PSI and excellent weldability. This versatile structural steel is ideal for general fabrication, support bracing, industrial maintenance, and trailer frames. The hot rolled finish has a distinctive mill scale. In stock for same-day Los Angeles pickup. Learn More

3/4 inch diameter Cold Rolled All Thread Rod in a 120-inch length with a zinc-plated finish for corrosion resistance. Manufactured from low-carbon steel, its strength conforms to ASTM A307 Grade A with a typical tensile strength of 63,800 PSI. This versatile, continuously threaded rod is ideal for general-purpose fastening, bracing, and anchoring applications in construction and industrial settings. In stock Los Angeles. Learn More

A 2" x 11 gauge Galvanized Square Tube, available in 24-foot lengths. Manufactured from ASTM A500 Grade B steel, this tube provides a minimum yield strength of 46,000 PSI for structural applications. The hot-dip galvanized zinc coating delivers superior corrosion resistance for outdoor use. Ideal for trailer frames, gates, handrails, and structural supports. In stock in Los Angeles. Learn More

1/2" thick A36 Hot Rolled Steel Plate, 48" x 120". A structural carbon steel conforming to ASTM A36, it provides a guaranteed minimum yield strength of 36,000 PSI and excellent weldability. This heavy-gauge plate is ideal for manufacturing column base plates, heavy equipment mounting pads, gussets, and other demanding structural applications where strength and durability are critical. In stock for immediate Los Angeles pickup. Learn More

A36 Hot Rolled Steel Flat Bar, 1-1/8" wide by 1/8" thick. This general-purpose structural steel conforms to ASTM A36 and offers a minimum yield strength of 36,000 PSI with excellent weldability and formability. Its medium size is ideal for structural bracing, machine ways, support straps, and general fabrication projects where strength is required. In stock for same-day Los Angeles pickup. Learn More

3/4 inch 1018 Cold Rolled Steel Square Bar, sold in 144" lengths. This general-purpose low-carbon steel conforms to ASTM A108, offering excellent machinability and a clean, smooth surface finish. The cold drawing process increases strength to 63,800 PSI and provides tight dimensional tolerances, making it ideal for shafts, fixtures, and precision machined parts. In stock Los Angeles. Learn More

This 12" x 7/64" Cut-Off Wheel is an industrial-grade abrasive tool compliant with ANSI B7.1 safety standards. Engineered with fiberglass reinforcement for a maximum speed of 5,100 RPM, it is designed for fast, clean cuts on various metals. The 1" arbor hole fits standard stationary cut-off machines. Learn More

Engineered for durability, this 1/2" x 4-1/2" masonry drill bit features a robust tungsten carbide tip for efficient drilling in concrete, brick, and block. It is manufactured to meet ANSI B212.15 standards, ensuring reliable performance in demanding construction and MRO applications. Learn More

A36 Hot Rolled Steel Angle measuring 6" x 6" with a 3/8" thickness. This structural shape conforms to ASTM A36 standards, delivering a minimum yield strength of 36,000 PSI and excellent weldability for robust joints. Its large size is ideal for heavy-duty applications including building frames, industrial equipment bases, and trailer manufacturing. In stock for Los Angeles pickup. Learn More

3" x 3" x 3/16" Hot Rolled Steel Angle, 240" length. Conforms to ASTM A36 with a minimum 36,000 PSI yield strength and excellent weldability. This medium-sized structural angle provides robust support for equipment bases, framing, and general fabrication. Its hot rolled finish has a mill scale surface. In stock for same-day Los Angeles pickup. Learn More

1" x 1" x 1/8" Hot Rolled A36 Steel Angle available in 240" (20 ft) lengths. Conforming to ASTM A36, this angle offers a minimum yield strength of 36,000 PSI and excellent weldability. The hot-rolled process results in a durable, scaled finish. Its small profile is ideal for light structural framing, equipment guards, brackets, and general fabrication projects. In stock for same-day Los Angeles pickup. Learn More

Engineered for strength and durability, these 5x5 Heavy Duty Weldable Butt Hinges are essential for industrial gates, doors, and custom fabrication. Made from high-quality, weldable low-carbon steel, they provide a secure and permanent pivot point. Ideal for heavy-duty applications requiring robust performance. Learn More

2" x 2" Hot Rolled Steel Square Tube with a 0.072" wall thickness, available in 240" (20 ft) lengths. This product meets ASTM A500 Grade B specifications, providing a minimum yield strength of 46,000 PSI and excellent weldability. It is a cost-effective material for structural applications including equipment frames, supports, trailer manufacturing, and general fabrication. In stock for immediate Los Angeles pickup. Learn More

3/4" x 3/4" x 0.065" wall 304 Stainless Steel Square Tube. Conforms to ASTM A269, providing 73,200 PSI tensile strength with excellent weldability and corrosion resistance. This small-profile tube is ideal for lightweight structural applications, architectural trim, handrails, and decorative projects requiring both strength and a clean finish. Available in 240-inch lengths for same-day pickup in Los Angeles. Learn More

1" x 0.065" wall 304 Stainless Steel Square Tube, sold in 240-inch lengths. This versatile tube meets ASTM A269 standards and offers 73,200 PSI tensile strength, combining excellent corrosion resistance with superior weldability. Its medium size is ideal for fabricating structural frames, equipment supports, architectural handrails, and decorative elements. In stock for same-day cutting and Los Angeles pickup. Learn More

1" x 1" x 3/16" A36 Hot Rolled Steel Angle, sold in 240" (20 ft) lengths. This structural angle conforms to ASTM A36 standards, offering a minimum yield strength of 36,000 PSI and excellent weldability. Its small profile is ideal for light-duty framing, support brackets, equipment guards, and general fabrication projects. In stock and available for same-day pickup in Los Angeles. Learn More

1" x 1" x 1/4" Hot Rolled Steel Angle in 20-foot lengths. A versatile structural shape conforming to ASTM A36 with a minimum yield strength of 36,000 PSI. This material offers excellent weldability and good machinability, making it easy to fabricate. Its small profile is ideal for light structural framing, equipment guards, mounting brackets, and general repair projects. In stock for Los Angeles pickup. Learn More

3" x 2" x 3/8" Hot Rolled Steel Angle available in 20-foot lengths. Made from A36 grade steel, this angle conforms to ASTM A36 standards and provides a minimum yield strength of 36,000 PSI. Its excellent weldability and high strength make it ideal for structural framing, equipment bases, and general fabrication. In stock for Los Angeles pickup. Learn More

1" x 1" Galvanized Steel Square Tube with a 16 gauge wall, sold in a 24-foot length. Conforming to ASTM A500 Grade B, this structural tubing provides a minimum yield strength of 46,000 PSI. The hot-dip galvanized zinc coating delivers excellent corrosion and rust resistance, making it ideal for outdoor frames, trailers, and gates. In stock for Los Angeles pickup. Learn More

1/4" x 1/4" 304 Stainless Steel Square Bar, 144" length. Conforms to ASTM A276, offering excellent corrosion resistance and weldability with 73,200 PSI tensile strength. This austenitic, non-magnetic grade is ideal for structural supports, frames, shafts, and food processing equipment where sanitation is critical. Its small profile is suited for light-duty braces and mounting hardware. In stock for Los Angeles pickup. Learn More

1/4" A36 Hot Rolled Steel Square Bar in 240" (20 ft) lengths. Conforms to ASTM A36 with 36,000 PSI minimum yield strength, excellent weldability, and easy fabrication. The scaled mill finish is typical for hot rolling. This small profile is perfect for light structural framing, support brackets, equipment stands, and general repairs. In stock Los Angeles. Learn More

8" x 8" x 1/2" Hot Rolled A36 Steel Angle, sold in a 240" length. Conforming to ASTM A36, this angle offers a minimum yield strength of 36,000 PSI and excellent weldability. Its substantial size makes it ideal for heavy structural applications, including building frames, industrial equipment bases, and primary support columns. In stock for same-day Los Angeles pickup. Learn More

A36 Hot Rolled Steel Angle with 3" and 2" legs and a 3/16" thickness. This structural angle conforms to ASTM A36 specifications, providing a minimum yield strength of 36,000 PSI and excellent weldability. Its medium size is ideal for structural framing, equipment bases, support brackets, and general fabrication projects requiring robust, cost-effective steel components. In stock for same-day pickup in Los Angeles. Learn More

2" x 2" x 3/16" A36 Hot Rolled Steel Angle in 20-foot lengths. Conforming to ASTM A36, this structural angle provides a minimum 36,000 PSI yield strength and excellent weldability for fabrication. Its versatile medium size is ideal for structural framing, equipment bases, industrial shelving, and general repairs. In stock and available for same-day pickup in Los Angeles. Learn More

3/8" x 3/8" 304 Stainless Steel Square Bar, 144" length. Conforms to ASTM A276, providing excellent corrosion resistance and weldability with 73,200 PSI tensile strength. This austenitic, non-magnetic grade is a versatile choice for general fabrication, ideal for creating brackets, braces, and supports for industrial and architectural applications. In stock for Los Angeles pickup. Learn More

1/2" x 1/2" 304 Stainless Steel Square Bar, 144" length. Conforms to ASTM A276, offering an excellent balance of strength, corrosion resistance, and weldability. With 73,200 PSI tensile strength, this versatile bar is ideal for structural supports, frames, shafts, and general fabrication. Its clean finish is suitable for architectural and food-grade applications. In stock for Los Angeles pickup. Learn More

A36 Hot Rolled Steel Angle measuring 3" x 3" with a 1/2" thickness, supplied in a 240" (20 ft) length. This structural angle conforms to ASTM A36 specifications and provides a minimum yield strength of 36,000 PSI with excellent weldability. Its medium size is ideal for structural framing, equipment bases, bracing, and general fabrication projects. In stock for immediate Los Angeles pickup. Learn More

A36 Hot Rolled Steel Angle with 2" x 1-1/2" legs and 1/4" thickness. Conforms to ASTM A36, providing a minimum yield strength of 36,000 PSI and excellent weldability. This medium-sized angle is ideal for structural framing, equipment bases, support brackets, and general fabrication projects requiring strength and durability. In stock and available for same-day pickup in Los Angeles. Learn More

A36 Hot Rolled Steel Angle measuring 2" x 2" with a 1/4" thickness, in a 240" length. This structural angle conforms to ASTM A36 and offers a minimum yield strength of 36,000 PSI, excellent weldability, and good formability. Its medium size is ideal for structural framing, equipment bases, shelving, and general fabrication projects. In stock for same-day Los Angeles pickup. Learn More

A36 Hot Rolled Steel Angle measuring 1/2" x 1/2" with a 1/8" thickness. This carbon structural steel conforms to ASTM A36 and provides a minimum yield strength of 36,000 PSI. Its excellent weldability and formability make it a versatile choice for fabrication. The small profile is ideal for light framing, mounting brackets, corner guards, and custom DIY projects. In stock for same-day Los Angeles pickup. Learn More

A36 Hot Rolled Steel Angle measuring 2-1/2" x 2-1/2" legs with a 3/16" thickness. This structural angle conforms to ASTM A36 standards and provides a minimum yield strength of 36,000 PSI. Its excellent weldability and durability make it ideal for structural framing, equipment bases, bracing, and general fabrication projects. In stock and available for custom cutting and same-day pickup in Los Angeles. Learn More

2" x 1/8" A36 Hot Rolled Steel Flat Bar, available in 20-foot lengths. This structural steel bar conforms to ASTM A36, providing a minimum yield strength of 36,000 PSI and excellent weldability. Its medium size is versatile for structural bracing, equipment frames, base plates, and general fabrication projects. The hot-rolled finish has a characteristic scale. In stock for same-day Los Angeles pickup. Learn More

A 6" x 3/8" Hot Rolled Steel Flat Bar made from structural A36 steel. Conforming to ASTM A36, it provides a minimum yield strength of 36,000 PSI and excellent weldability for general fabrication. This large-format bar is ideal for creating machinery base plates, heavy structural supports, trailer frame components, and industrial reinforcements. In stock for immediate Los Angeles pickup. Learn More

A 4" wide by 3/4" thick A36 Hot Rolled Steel Flat Bar, supplied in a 240" length. This structural steel bar conforms to ASTM A36 standards, offering a minimum yield strength of 36,000 PSI and excellent weldability. Its substantial size makes it ideal for fabricating base plates, heavy structural supports, trailer frames, and industrial braces. In stock Los Angeles. Learn More

A36 Hot Rolled Steel Channel measuring 1" wide x 1/2" high x 1/8" thick in 20-foot lengths. This general-purpose structural steel conforms to ASTM A36 and provides a minimum yield strength of 36,000 PSI. Its excellent weldability and formability make it ideal for light structural applications, equipment frames, trailer components, and mounting brackets. In stock for Los Angeles pickup. Learn More

4" x 1-1/4" Hot Rolled Steel Flat Bar, available in 20 ft lengths. This A36 structural steel conforms to ASTM A36 standards and offers a minimum yield strength of 36,000 PSI. Its properties include excellent weldability and good formability. As a large-width bar, it is ideal for fabricating heavy structural components, machinery base plates, and industrial supports. In stock for Los Angeles pickup. Learn More

7/8 inch diameter Cold Rolled All Thread Rod, 120" length, with an oil finish for rust prevention. Conforming to the strength requirements of ASTM A307 Grade A, this rod is made from low-carbon steel offering 63,800 PSI tensile strength. Its continuous threading provides versatile fastening for construction, manufacturing, and general repair. In stock for immediate Los Angeles pickup. Learn More

A36 Hot Rolled Steel Angle measuring 1-1/2" x 1-1/2" with a 1/8" thickness, supplied in 20-foot lengths. This structural angle conforms to ASTM A36 standards and offers a minimum yield strength of 36,000 PSI with excellent weldability. Its medium size is ideal for structural framing, equipment bases, and general fabrication projects requiring robust support. In stock and ready for same-day pickup in Los Angeles. Learn More

A36 Hot Rolled Steel Angle measuring 1-3/4" x 1-3/4" with a 3/16" thickness. This structural angle conforms to ASTM A36 standards and offers a minimum yield strength of 36,000 PSI and excellent weldability. The hot-rolled process results in a scaled finish. Its medium size is ideal for structural framing, equipment bases, bracing, and general fabrication projects requiring robust, easy-to-weld steel. In stock in Los Angeles. Learn More

4" x 1" Hot Rolled Steel Flat Bar, 240" length. A versatile structural steel conforming to ASTM A36 with 36,000 PSI minimum yield strength. Features excellent weldability and good machinability. The large cross-section is ideal for heavy-duty applications like base plates, structural supports, die components, and trailer frames. In stock for same-day cutting and Los Angeles pickup. Learn More

7" x 3/8" Hot Rolled Steel Flat Bar, 240" length. Conforming to ASTM A36, this carbon structural steel offers a minimum yield strength of 36,000 PSI and excellent weldability. The large width makes it ideal for manufacturing heavy-duty base plates, structural supports, and industrial equipment frames where strength and ease of fabrication are critical. In stock for Los Angeles pickup. Learn More

A 3" x 1/2" Hot Rolled Steel Flat Bar conforming to ASTM A36. This general-purpose structural steel features 58,000 PSI tensile strength and excellent weldability. The hot-rolled process results in a scaly, mill finish suitable for applications where strength is prioritized over precise dimensions. Its medium width is ideal for structural bracing, support brackets, and general fabrication projects. In stock for immediate Los Angeles pickup. Learn More

1-1/2" x 1-1/2" x 3/16" Hot Rolled Steel Angle conforming to ASTM A36. This general-purpose structural steel provides a minimum 36,000 PSI yield strength and excellent weldability. The medium size is ideal for equipment frames, support bracing, heavy-duty shelving, and general fabrication. In stock and ready for same-day pickup or delivery in Los Angeles. Learn More

A36 Hot Rolled Steel Angle measuring 2-1/2" x 1-1/2" legs with 1/4" thickness. This structural angle conforms to ASTM A36 specifications, offering a minimum yield strength of 36,000 PSI and excellent weldability. The unequal leg profile is ideal for custom framing, equipment bases, and support brackets where specific fit-up is required. In stock for same-day pickup in Los Angeles. Learn More

This 3-1/2" x 2-1/2" x 3/8" Hot Rolled Steel Angle is manufactured to ASTM A36 specifications, providing a minimum yield strength of 36,000 PSI and excellent weldability. The large, unequal leg design offers robust support for heavy structural applications like building frames, equipment bases, and industrial supports. Its hot-rolled finish is ready for fabrication. In stock for same-day Los Angeles pickup. Learn More

1" x 12" Hot Rolled Steel Flat Bar, available in lengths up to 20 feet. Made from A36 structural steel, it conforms to ASTM A36 specifications and offers a minimum yield strength of 36,000 PSI. This large-format bar provides excellent weldability and good machinability. It is ideal for heavy structural applications, base plates, equipment mounting, and general fabrication. In stock for immediate Los Angeles pickup. Learn More

2" x 1/2" A36 Hot Rolled Steel Flat Bar, 20-foot (240") length. Conforms to ASTM A36 with 36,000 PSI minimum yield strength and excellent weldability. This medium-width bar is a versatile choice for structural bracing, machine ways, base plates, and general fabrication projects. Its hot-rolled finish is suitable where precise tolerances are not critical. In stock for Los Angeles pickup. Learn More

1-1/4" x 1-1/4" x 3/16" A36 Hot Rolled Steel Angle, often called angle iron. This structural grade steel conforms to ASTM A36, providing a minimum yield strength of 36,000 PSI and excellent weldability for general fabrication. Its small profile is ideal for light framing, support brackets, trim, and equipment guards. In stock for immediate cutting and same-day Los Angeles pickup. Learn More

4" x 1/4" A36 Hot Rolled Steel Flat Bar, 240" length. ASTM A36 compliant with 36,000 PSI minimum yield strength. Features excellent weldability and formability for general structural use. This large-format bar is ideal for heavy applications like base plates, equipment mounting, and frame components where strength and cost-effectiveness are critical. In stock for immediate Los Angeles pickup. Learn More

6" x 1/2" A36 Hot Rolled Steel Flat Bar, 240" length. Conforms to ASTM A36 with 36,000 PSI minimum yield strength and excellent weldability. This large-format structural bar provides robust support for heavy-duty applications. Its size is ideal for base plates, heavy structural components, die components, and trailer frames. In stock for immediate cutting and pickup in Los Angeles. Learn More