Search results for: 'pairs cycle base regal q specific metal'

26 Gauge Galvanized Corrugated Steel Sheet, measuring 36 inches in width by 144 inches in length. Produced via a continuous hot-dip process to ASTM A653 specifications with a G90 zinc coating for excellent rust prevention. This lightweight and formable sheet is ideal for roofing, siding, and agricultural buildings. In stock and available for same-day pickup in Los Angeles. Learn More

3/4" x 1/8" 304 Stainless Steel Flat Bar, sold in 144" lengths. This versatile bar meets ASTM A276 specifications and provides excellent corrosion resistance and weldability. Its 73,200 PSI tensile strength makes it a reliable choice for general fabrication. The small profile is ideal for creating custom brackets, support straps, and decorative trim. In stock for same-day Los Angeles pickup. Learn More

2" x 2" 304 Stainless Steel Square Tube with a 0.065" wall thickness, available in 240" (20 ft) lengths. This product meets ASTM A269 specifications and offers a balance of 73,200 PSI tensile strength, excellent corrosion resistance, and superior weldability. Its medium size is ideal for constructing architectural handrails, equipment frames, and structural supports. In stock for same-day Los Angeles pickup. Learn More

1" x 1" 304 Stainless Steel Square Bar, 144" length. This versatile bar meets ASTM A276 specifications and offers an excellent combination of strength (73,200 PSI tensile) and corrosion resistance. Its weldability and formability make it a standard for general fabrication. Medium size is ideal for structural supports, machine frames, braces, and shafts. In stock for immediate Los Angeles pickup. Learn More

1/2" x 3/4" 1018 Cold Rolled Steel Flat Bar, sold in 144" lengths. This product meets ASTM A108 specifications and offers 63,800 PSI tensile strength, a smooth surface finish, and tight dimensional tolerances. Its excellent machinability and good weldability make it a versatile choice. The small profile is ideal for brackets, straps, and shims. In stock for Los Angeles pickup. Learn More

1/2" x 1/2" 304 Stainless Steel Square Tube with a 0.065" wall, available in 240" lengths. Conforms to ASTM A269 specifications, offering a balance of 73,200 PSI tensile strength, excellent weldability, and superior corrosion resistance. This small-profile tubing is ideal for architectural trim, decorative work, lightweight frames, and support structures. In stock for same-day Los Angeles pickup. Learn More

1-1/2 inch OD x 0.065 inch wall Hot Rolled Steel Round Tube, 240 inches long. Produced to ASTM A500 Grade B specifications, this tubing provides a minimum yield strength of 46,000 PSI and excellent weldability for structural applications. The medium diameter is ideal for machinery frames, handrails, and general fabrication. In stock for immediate cutting and Los Angeles pickup. Learn More

1-1/2" OD x 0.120" wall Hot Rolled Steel Round Tube, 240" length. Produced to meet ASTM A500 Grade B specifications, this structural tubing offers 58,000 PSI tensile strength and excellent weldability. Its medium diameter is ideal for fabrications requiring high strength-to-weight performance, including equipment frames, roll cages, handrails, and structural supports. In stock for Los Angeles pickup. Learn More

2" OD x 0.120" wall 304 Stainless Steel Round Tube, sold in 20' lengths. This tubing meets ASTM A269 specifications and provides 73,200 PSI tensile strength. Known for its excellent corrosion resistance, weldability, and formability, it's a versatile choice for structural and decorative projects. Ideal for handrails, equipment frames, and architectural applications. In stock for immediate pickup in Los Angeles. Learn More

6063-T5 Aluminum Pipe with a 1-1/2 inch nominal size and standard Schedule 40 wall thickness. This seamless extruded pipe conforms to ASTM B241 specifications and offers 27,000 PSI tensile strength. Known as "architectural aluminum," its excellent corrosion resistance and superior surface finish make it ideal for handrails, frames, and furniture. In stock for immediate cutting and pickup in Los Angeles. Learn More

1/2 inch Nominal Pipe Size (NPS) Hot Rolled Black Pipe with a Schedule 40 wall. This product conforms to ASTM A53 Grade B specifications, providing 60,000 PSI tensile strength and excellent weldability. The small diameter is ideal for plumbing, natural gas lines, compressed air systems, and light structural applications like handrails. Standard uncoated 'black' finish. In stock for Los Angeles pickup. Learn More

#3 (3/8") Grade 60 Hot Rolled Rebar, 20-foot length. Meets ASTM A615 specifications and features a minimum yield strength of 60,000 PSI and a deformed surface for superior mechanical bond with concrete. This standard reinforcing bar is essential for adding tensile strength to foundations, slabs-on-grade, and retaining walls. In stock for same-day Los Angeles pickup. Learn More

This 3/4" x 3/4" x 1/8" hot rolled steel angle is a versatile structural shape conforming to ASTM A36 specifications. It offers a minimum yield strength of 36,000 PSI and excellent weldability, making it easy to fabricate. The small profile is ideal for light structural framing, equipment guards, mounting brackets, and custom fabrication projects. In stock for Los Angeles pickup. Learn More

This 3/16" x 4-1/4" industrial cobalt drill bit is engineered from M35 steel (5% cobalt) for superior heat resistance. Its 135° split-point tip ensures precise, no-walk starts on hard materials like stainless steel and cast iron. Manufactured to meet industrial performance standards for durability and accuracy. Learn More

Protect high-traffic areas with our Galvanized Corner Guard. Made from durable 16 gauge steel with a G90 galvanized coating for superior corrosion resistance, conforming to ASTM A653 standards. Ideal for industrial, commercial, and MRO applications requiring robust wall and corner protection. Learn More

Protect high-traffic areas with our durable 16-gauge Galvanized Steel Corner Guard. Featuring a G90 galvanized coating for superior corrosion resistance, this 2" x 2" x 36" guard provides robust impact protection for commercial and industrial walls. Learn More

Our 260 Construction Adhesive is a high-strength formulation engineered for demanding industrial applications. Compliant with ASTM C557, this adhesive provides a durable, reliable bond for a wide range of construction and fabrication materials. Learn More

Our 1/2 inch Cobalt Drill Bit is engineered from M35 steel with 5% cobalt for superior heat resistance up to 1100°F. Featuring a 135° split-point geometry compliant with ANSI standards, this bit is designed for high-performance drilling in hard materials like stainless steel and cast iron. Learn More

The 1-1/4 Inch Square Plastic Cap provides a clean, finished look for square tubing applications. Made from durable, weather-resistant black plastic, it protects against sharp edges and internal debris. This cap offers a secure press-fit for reliability in fencing, furniture, and equipment fabrication. Learn More

This industrial-grade 0.9mm (.035) MIG welding wire is engineered for high-performance fabrication and repair. Certified to meet AWS/ASME standards, it provides a stable arc and minimal spatter for clean, strong welds on various steel types. Available in an 11 LBS (1KG) spool. Learn More

Product 217 is an industrial-grade construction adhesive engineered to meet ASTM C557 standards. This high-strength adhesive provides a durable, permanent bond for a wide range of fabrication, MRO, and construction applications on various materials. Learn More

3/4 inch Nominal Pipe Size (NPS) Schedule 40 Galvanized Steel Pipe, 21 ft length. Manufactured to ASTM A53 Grade B specifications, this pipe offers a minimum tensile strength of 60,000 PSI and superior corrosion resistance from its hot-dip zinc coating. Ideal for outdoor structures, non-potable water plumbing, handrails, and fencing. In stock and available for same-day pickup in Los Angeles. Learn More

5/16" Cold Rolled 1018 Hexagon Bar, 144" length. Meets ASTM A108 specifications. This low-carbon steel bar offers 63,800 PSI tensile strength, a smooth surface finish, and tight dimensional tolerances from the cold drawing process. Its excellent machinability and good weldability make it suitable for producing fasteners, shafts, hydraulic fittings, and other precision machined components. In stock for same-day Los Angeles pickup. Learn More

3/4" x 3/8" Hot Rolled Steel Flat Bar in 20 ft lengths. Made from structural A36 steel, it meets ASTM A36 specifications and offers a minimum yield strength of 36,000 PSI. This small-profile flat bar is excellent for fabricating brackets, straps, shims, and light-duty frames where weldability and strength are required. In stock for immediate Los Angeles pickup or delivery. Learn More

Grade 60 #5 (5/8" diameter) Hot Rolled Rebar, supplied in a 20-foot length. This steel bar meets ASTM A615 specifications with a minimum yield strength of 60,000 PSI and a tensile strength of 90,000 PSI. Its deformed surface creates a strong mechanical bond with concrete, making it the industry standard for reinforcing foundations, slabs, and retaining walls. In stock for Los Angeles pickup. Learn More

1-1/2 inch Nominal Pipe Size (NPS) Hot Rolled Black Pipe with a Schedule 40 wall thickness. Made from carbon steel conforming to ASTM A53 Grade B specifications, this pipe offers a minimum tensile strength of 60,000 PSI and excellent weldability. Its medium size is well-suited for plumbing mains, structural posts, handrails, and fire protection systems. In stock for immediate Los Angeles pickup. Learn More

3/4" OD x 0.075" wall Hot Rolled Steel Round Tube, sold in 20 ft lengths. Produced to ASTM A500 Grade B specifications, this tube offers a minimum yield strength of 46,000 PSI and excellent weldability. Its small diameter is well-suited for light structural applications, equipment frames, furniture, and custom fabrication projects where strength and economy are key. In stock for immediate Los Angeles pickup. Learn More

3/4" x 3/4" Hot Rolled Steel Square Tube with a 0.072" wall thickness, sold in 20-foot lengths. This A500 Grade B tube meets ASTM A500 specifications and offers a minimum yield strength of 46,000 PSI. Its excellent weldability and high strength-to-weight ratio make it ideal for structural frames, supports, gates, and general fabrication projects. In stock for Los Angeles pickup. Learn More

This 2 Inch Post Ball Cap provides a durable, decorative finish for square or round tubing. Fabricated from Class 25-30 gray cast iron, it is designed for welding onto fences, gates, and handrails, offering a classic architectural look. Learn More

Durable 1-1/2 inch square plastic cap designed for a secure fit on square tubing. Made from high-quality, weather-resistant Low-Density Polyethylene (LDPE), this cap provides a clean, finished appearance and protects against debris. Learn More

The C-Scroll (5112A) is a classic decorative element forged from high-quality Class 25-30 gray iron. This architectural-grade component is designed to add an elegant, traditional finish to custom fences, gates, and railings in fabrication projects. Learn More

SKU 215 is an industrial-grade construction adhesive engineered for high-strength bonding. Compliant with ASTM C557, this adhesive provides a durable, reliable bond for a wide range of materials in fabrication and MRO projects. Learn More

This 1-1/4" x 1-1/4" x 1/4" Hot Rolled Steel Angle is manufactured from A36 carbon steel, meeting ASTM A36 specifications. It offers a minimum yield strength of 36,000 PSI and excellent weldability, making it ideal for general fabrication. This small-profile angle is perfect for creating light structural frames, support brackets, equipment guards, and custom shelving projects. In stock for immediate Los Angeles pickup. Learn More

1" x 1" Hot Rolled Steel Square Bar in 240" lengths. Made from general-purpose A36 steel, it conforms to ASTM A36 specifications and provides a minimum yield strength of 36,000 PSI. Its excellent weldability and formability make it ideal for structural frames, brackets, trailer components, and general fabrication. This medium-sized bar is a versatile choice for construction and industrial maintenance. In stock for Los Angeles pickup. Learn More

Our 2 Inch Square Plastic Cap is an industrial-grade finishing component made from durable, low-density polyethylene (LDPE). It provides a secure, press-fit closure for square tubing, protecting against moisture and debris while offering a clean, professional appearance. Learn More

Durable 5/8 Inch Square Plastic Caps designed for a secure, press-fit on square tubing. Made from industrial-grade, weather-resistant plastic, these caps provide a clean, finished appearance while protecting against dirt, moisture, and sharp edges. Ideal for fencing, furniture, and equipment fabrication. Learn More

The 1-¼” Single Lockbox with a single hole is an essential component for security gates and fences. Constructed from high-quality, weldable steel, it provides a durable housing for gate locks. Designed for easy installation and long-term performance in commercial and residential applications. Learn More

14 Gauge (48" x 120") A36 Hot Rolled Steel Sheet. Conforms to ASTM A36 with a minimum yield strength of 36,000 PSI. This versatile material offers excellent weldability and good formability, making it a cost-effective choice for various applications. Ideal for structural panels, machine guards, trailer frames, and general fabrication projects. In stock for same-day Los Angeles pickup. Learn More

16 Gauge (48" x 120") A36 Hot Rolled Steel Sheet. This material conforms to ASTM A36 and offers a minimum yield strength of 36,000 PSI, providing excellent weldability and good formability. Its medium thickness is ideal for structural panels, machine guards, trailer frames, and general fabrication projects where precise dimensions are not critical. A cost-effective solution for robust applications. In stock for Los Angeles pickup. Learn More

18 Gauge (0.0478") 1018 Cold Rolled Steel Sheet, 48" wide by 120" long. This material offers a smooth, scale-free surface, superior dimensional tolerance, and excellent formability for bending and stamping. With good weldability and 63,800 PSI tensile strength, it is a versatile choice for applications requiring a precise, paint-ready surface, such as electronic enclosures and automotive panels. In stock for Los Angeles pickup. Learn More

3" x 3" x 3/16" Hot Rolled Steel Angle, 240" length. Conforms to ASTM A36 with a minimum 36,000 PSI yield strength and excellent weldability. This medium-sized structural angle provides robust support for equipment bases, framing, and general fabrication. Its hot rolled finish has a mill scale surface. In stock for same-day Los Angeles pickup. Learn More

4" x 1/8" 304 Stainless Steel Flat Bar, 144" length. Conforming to ASTM A276, this austenitic grade offers 73,200 PSI tensile strength and excellent corrosion resistance. Its strength and superior weldability make it a top choice for fabrication. This large width is ideal for base plates, heavy structural supports, and die components. In stock for Los Angeles pickup. Learn More

6" wide by 1/4" thick 304 Stainless Steel Flat Bar in a 144" length. Conforming to ASTM A276, this bar provides excellent corrosion resistance and weldability for demanding environments. With a tensile strength of 73,200 PSI, this large-profile bar is ideal for structural supports, base plates, and heavy-duty fabrication projects. In stock for immediate Los Angeles pickup. Learn More

6061-T6 Aluminum Flat Bar measuring 1/4" thick by 6" wide in a 144" length. Conforms to ASTM B211. This versatile alloy offers a combination of high strength (45,000 PSI tensile), excellent corrosion resistance, and good machinability. The large width makes it ideal for base plates, heavy structural supports, and machined components. In stock for same-day Los Angeles pickup. Learn More

7/16" x 48" x 120" A36 Hot Rolled Steel Plate, compliant with ASTM A36 standards. This structural plate offers a minimum yield strength of 36,000 PSI and excellent weldability, making it ideal for robust applications. Its large thickness is perfect for fabricating column base plates, heavy equipment mounting pads, wear plates, and structural gussets. In stock for immediate pickup in Los Angeles. Learn More

A 3" x 20' Hot Rolled Steel I-Beam manufactured from A36 carbon steel. Conforming to ASTM A36, this beam provides a minimum yield strength of 36,000 PSI with excellent weldability and formability. Its 'I' shape offers an efficient strength-to-weight ratio for structural applications. Ideal for medium-duty frames, machinery bases, and mezzanines. In stock for Los Angeles pickup. Learn More

4" x 1" Hot Rolled Steel Flat Bar, 240" length. A versatile structural steel conforming to ASTM A36 with 36,000 PSI minimum yield strength. Features excellent weldability and good machinability. The large cross-section is ideal for heavy-duty applications like base plates, structural supports, die components, and trailer frames. In stock for same-day cutting and Los Angeles pickup. Learn More

A36 Hot Rolled Standard I-Beam with a 4" height, 2.796" flange width, and weighing 9.5 lbs/ft. Conforming to ASTM A36, it provides a minimum yield strength of 36,000 PSI for reliable structural performance. This beam offers excellent weldability and formability, making it ideal for machinery bases, building frames, mezzanine supports, and trailer chassis. In stock for same-day Los Angeles pickup. Learn More

A36 Hot Rolled Steel Flat Bar, 3 inches wide by 3/8 inch thick. Conforms to ASTM A36 standards with a minimum yield strength of 36,000 PSI and excellent weldability for easy fabrication. Its medium size is ideal for structural braces, equipment mounts, base plates, and general repairs. In stock for Los Angeles pickup. Learn More

4" x 3/16" 6061-T6 Aluminum Flat Bar, 144" length. Conforms to ASTM B211, offering a combination of high strength (45,000 PSI tensile), good machinability, and excellent corrosion resistance. This large-width bar is ideal for structural applications, including base plates, heavy equipment mounting, and die components. Ready for same-day cutting and pickup in Los Angeles. Learn More

1/2" x 48" x 120" Hot Rolled Diamond Plate, made from A36 steel. Conforms to ASTM A786 standards and features a raised pattern for maximum skid resistance. With a tensile strength of 58,000-80,000 PSI, this heavy-duty plate is ideal for industrial flooring, loading ramps, and heavy equipment base plates. In stock for same-day Los Angeles pickup. Learn More

Our 7-inch barrel hinges are engineered from heavy-duty, weldable carbon steel for maximum durability and strength. Designed for high-load applications, these hinges provide a smooth, reliable pivot for industrial gates and security doors. The robust construction ensures long-lasting performance in demanding MRO and fabrication environments. Learn More

This 2" Square Pressed Steel Cap provides a clean, protective finish for square tubing and fence posts. Fabricated from durable, weldable mild steel, it prevents water ingress and adds a professional aesthetic to any ornamental ironwork project. Learn More

This 1-¼” Single Hole Lockbox is fabricated from high-quality, weldable steel. Designed for security gate and fence applications, it provides a durable housing for standard lock mechanisms. Its single-hole configuration ensures straightforward installation and compatibility. Learn More

The 1/4" Cobalt Drill Bit is engineered from M35 steel with 5% cobalt for exceptional heat resistance up to 1100°F. Its 135° split-point geometry ensures precise, walk-free starts and efficient drilling in hard materials like stainless steel and cast iron. Learn More

This 1-1/4" square pressed steel cap provides a clean, finished look for fence posts and railings. Made from durable, weldable mild steel, it protects post interiors from debris and weather. Ideal for ornamental and security fencing applications. Learn More

The Bobco Mini Portable Welding Machine is a versatile dual-voltage (110V/220V) unit designed for stick welding. It is compatible with AWS-certified electrodes from 1/16" to 1/8" in diameter, delivering reliable performance for light fabrication, repair, and MRO tasks. Learn More

304 Stainless Steel Flat Bar measuring 3" wide by 1/4" thick in a 144" length. Certified to ASTM A276, this versatile bar offers 73,200 PSI tensile strength, excellent corrosion resistance, and superior weldability. Its medium size is ideal for fabricating structural braces, supports, base plates, and components for food processing equipment. In stock Los Angeles. Learn More

This 6 inch by 3/8 inch 1018 Cold Rolled Steel Flat Bar offers tight dimensional tolerances and a smooth, scale-free surface. Conforming to ASTM A108, it has a tensile strength of 63,800 PSI and excellent machinability. Its large width makes it ideal for base plates, structural gussets, and heavy equipment mounting. In stock for Los Angeles pickup. Learn More

1-1/2" x 5/8" 1018 Cold Rolled Flat Bar, 144" length. Conforming to ASTM A108, this bar offers a smooth, scale-free finish, tight dimensional tolerances, and excellent machinability (70% of 1212 steel). With 63,800 PSI tensile strength, it's ideal for brackets, base plates, and structural components requiring precision. In stock for same-day Los Angeles pickup. Learn More

4"x4"x5/16" A36 Hot Rolled Steel Angle, 240" length. Conforms to ASTM A36, with 36,000 PSI minimum yield strength and excellent weldability. This large structural angle is ideal for heavy-duty applications like building frames, industrial supports, and equipment bases where strength and rigidity are critical. In stock and available for same-day pickup in Los Angeles. Learn More

4" Hot Rolled Standard I-Beam (S-Beam) manufactured from A36 carbon steel. Conforms to ASTM A36 with a minimum yield strength of 36,000 PSI and excellent weldability. The 4" height and 7.7 lbs/ft weight provide high strength for structural applications, including building frames, machinery bases, and support trusses. In stock for Los Angeles pickup. Learn More

4" x 7.25 lb/ft A36 Hot Rolled Steel Channel, available in 20 ft lengths. Conforms to ASTM A36, offering a minimum yield strength of 36,000 PSI and excellent weldability. Its robust profile is ideal for heavy structural applications, building frames, industrial supports, and heavy equipment bases. In stock and available for same-day pickup in Los Angeles. Learn More

12" x 1/2" A36 Hot Rolled Steel Flat Bar, 240" length. Conforms to ASTM A36 with a minimum yield strength of 36,000 PSI. This large-format structural bar offers excellent weldability and good machinability. Ideal for heavy-duty applications like base plates, structural supports, die components, and equipment frames. In stock for same-day Los Angeles pickup. Learn More

3" x 5.7 lbs/ft A36 Hot Rolled Standard I-Beam, conforming to ASTM A36. Features a 36,000 PSI minimum yield strength and excellent weldability for reliable fabrication. This medium-sized beam is ideal for building frames, machinery bases, trailer chassis, and other structural applications where predictable performance is critical. In stock for immediate Los Angeles pickup. Learn More

6 inch by 3/4 inch 6061-T6 Aluminum Flat Bar, sold in 144-inch lengths. Conforming to ASTM B211, this heat-treated alloy combines 45,000 PSI tensile strength with good workability and excellent corrosion resistance. The large cross-section is ideal for manufacturing base plates, heavy structural components, die components, and mounting blocks for industrial equipment. In stock for same-day Los Angeles pickup. Learn More

12 inch by 3/8 inch A36 Hot Rolled Steel Flat Bar, 240-inch length. Conforms to ASTM A36 with 36,000 PSI minimum yield strength and excellent weldability. This large-format structural bar is ideal for heavy-duty applications like base plates, structural supports, die components, and equipment frames where strength and rigidity are critical. In stock Los Angeles. Learn More

3" x 3" x 3/8" Hot Rolled Steel Angle, sold in 240-inch lengths. Conforms to ASTM A36 with a minimum yield strength of 36,000 PSI. This structural angle provides excellent weldability and good machinability. Its medium size is ideal for equipment bases, structural framing, and heavy-duty shelving supports. In stock for Los Angeles pickup. Learn More

A36 Hot Rolled Steel Angle measuring 2" x 2" x 1/8" in 20-foot (240") lengths. This structural angle conforms to ASTM A36, providing a minimum yield strength of 36,000 PSI and excellent weldability. Its medium size is ideal for general structural framing, equipment bases, bracing, and heavy-duty shelving supports. In stock Los Angeles. Learn More

3" x 2" x 3/8" Hot Rolled Steel Angle available in 20-foot lengths. Made from A36 grade steel, this angle conforms to ASTM A36 standards and provides a minimum yield strength of 36,000 PSI. Its excellent weldability and high strength make it ideal for structural framing, equipment bases, and general fabrication. In stock for Los Angeles pickup. Learn More

8" x 3/8" A36 Hot Rolled Steel Flat Bar, 240" length. A structural grade conforming to ASTM A36 with 36,000 PSI minimum yield strength and excellent weldability. This large-dimension structural bar is ideal for manufacturing heavy-duty base plates, trailer frames, and industrial supports where strength and durability are critical. In stock for immediate cutting and same-day pickup in Los Angeles. Learn More

12" x 1/4" A36 Hot Rolled Steel Flat Bar, 240" length. Conforms to ASTM A36 with a minimum yield strength of 36,000 PSI and excellent weldability. This large structural bar is ideal for manufacturing heavy-duty base plates, trailer frames, and structural supports where strength and durability are critical. Features a rough, scaled mill finish. In stock for immediate Los Angeles pickup or delivery. Learn More

1" x 3/4" A36 Hot Rolled Steel Flat Bar, 240" length. Conforms to ASTM A36 with a minimum yield strength of 36,000 PSI. This structural grade steel offers excellent weldability and good machinability. Its medium width is ideal for structural bracing, equipment frames, base plates, and general fabrication projects. In stock for immediate Los Angeles pickup. Learn More

A36 Hot Rolled Steel Channel, designated C9 x 13.4, with a 9" height and weight of 13.4 lbs/ft. Conforming to ASTM A36, this structural channel offers a minimum yield strength of 36,000 PSI and excellent weldability. Its large profile is ideal for heavy structural framing, equipment bases, and trailer chassis components. In stock for Los Angeles pickup. Learn More

5 inch x 1/4 inch 6061-T6 Aluminum Flat Bar, 144" length. Conforms to ASTM B211, offering a versatile combination of high strength (45,000 PSI tensile), good machinability, and excellent corrosion resistance. This large-width bar is ideal for manufacturing base plates, heavy structural components, die parts, and mounting blocks where stability and strength-to-weight ratio are critical. In stock for Los Angeles pickup. Learn More

A 3/4" x 4" 6061-T6 Aluminum Flat Bar in a 144" length. This versatile, heat-treatable grade conforms to ASTM B211 and delivers a high strength-to-weight ratio with 45,000 PSI tensile strength. It offers excellent weldability, machinability, and corrosion resistance. The wide profile is ideal for structural base plates, support brackets, and heavy-duty framing. In stock for Los Angeles pickup. Learn More

8 inch by 3/4 inch A36 Hot Rolled Steel Flat Bar, sold in 240-inch (20 ft) lengths. This structural grade steel conforms to ASTM A36 and offers a minimum yield strength of 36,000 PSI and excellent weldability. The large cross-section is ideal for heavy-duty applications including machinery base plates, structural supports, frame components, and industrial fabrication. In stock for Los Angeles pickup. Learn More

6061-T6 Aluminum Flat Bar measuring 1/8" thick by 3" wide in 144" lengths. This versatile, heat-treatable grade conforms to ASTM B211, offering 45,000 PSI tensile strength, good machinability, and excellent corrosion resistance. Its medium width is ideal for structural bracing, machine ways, base plates, and general fabrication projects. In stock and available for same-day pickup in Los Angeles. Learn More

This 1/2" x 2" 6061-T6 Aluminum Flat Bar offers an excellent combination of strength, corrosion resistance, and machinability. Conforming to ASTM B211, it has a tensile strength of 45,000 PSI, making it ideal for a wide range of structural applications including framing, bracing, base plates, and machined parts. In stock for same-day cutting and pickup in Los Angeles. Learn More

Our 1-1/4 Double Lock Box is a durable gate hardware component crafted from high-strength Class 25-30 gray cast iron. Designed for 1-1/4" square tubing, it provides a secure housing for lock mechanisms in ornamental fences and security gates. Ideal for industrial fabrication and commercial applications. Learn More

Our 3-1/2x2-1/4 Weldable Butt Hinges are engineered from high-strength, low-carbon steel for maximum weld penetration and durability. These components are designed for heavy-duty applications where a permanent, strong pivot is required. Ideal for steel gates, doors, and MRO projects. Learn More

This 11-inch Face Clamp is a versatile tool for woodworking, welding, and general fabrication. Its large jaw capacity and 2-inch reach provide strong, flush clamping for pocket-hole joinery, butt joints, and assembly tasks. The durable steel construction ensures rigidity and long service life for professional and DIY projects. In stock for same-day pickup in Los Angeles. Learn More

2" x 1/8" 304 Stainless Steel Flat Bar in 144" lengths. Conforming to ASTM A276, this bar delivers 73,200 PSI tensile strength with excellent corrosion resistance and weldability. Its versatile medium width is ideal for structural bracing, equipment framework, base plates, and architectural trim. Most stock is dual-certified 304/304L. In stock for same-day Los Angeles pickup. Learn More

2-1/2" x 1/8" 304 Stainless Steel Flat Bar, 144" length. Conforms to ASTM A276, offering 73,200 PSI tensile strength, excellent corrosion resistance, and superior weldability. This versatile austenitic grade is non-magnetic in its annealed state. The medium-width profile is ideal for structural bracing, equipment framework, base plates, and general fabrication. In stock for Los Angeles pickup. Learn More

4 inch x 1/4 inch 6061-T6 Aluminum Flat Bar, 144-inch length. Conforming to ASTM B211, this versatile alloy combines 45,000 PSI tensile strength with good machinability and excellent corrosion resistance. The T6 temper provides optimal strength for structural applications. This large width is ideal for base plates, heavy structural components, and die components. In stock for immediate Los Angeles pickup. Learn More

6" x 1/4" 1018 Cold Rolled Steel Flat Bar, 144" length. Conforms to ASTM A108 with 63,800 PSI tensile strength and a smooth, scale-free finish. This large flat bar offers tight dimensional tolerances and excellent machinability, making it ideal for base plates, heavy structural components, and die components where precision is critical. In stock for Los Angeles pickup. Learn More

A 4" x 1/2" 1018 Cold Rolled Steel Flat Bar, supplied in 144" lengths. Conforming to ASTM A108, this bar features a 63,800 PSI tensile strength, tight dimensional tolerances, and excellent machinability. The smooth, scale-free surface is ready for fabrication. Its substantial width makes it ideal for base plates, heavy structural bracing, and die components. In stock for Los Angeles pickup. Learn More

6" x 1/2" 1018 Cold Rolled Steel Flat Bar, 144" length. Conforms to ASTM A108 with 63,800 PSI tensile strength and excellent machinability. The cold drawing process provides tight dimensional tolerances and a smooth, scale-free finish. Its substantial 6-inch width makes it ideal for base plates, heavy structural components, and die sets. In stock for Los Angeles pickup. Learn More

7" x 3/8" Hot Rolled Steel Flat Bar, 240" length. Conforming to ASTM A36, this carbon structural steel offers a minimum yield strength of 36,000 PSI and excellent weldability. The large width makes it ideal for manufacturing heavy-duty base plates, structural supports, and industrial equipment frames where strength and ease of fabrication are critical. In stock for Los Angeles pickup. Learn More

A 4" wide by 3/4" thick A36 Hot Rolled Steel Flat Bar, supplied in a 240" length. This structural steel bar conforms to ASTM A36 standards, offering a minimum yield strength of 36,000 PSI and excellent weldability. Its substantial size makes it ideal for fabricating base plates, heavy structural supports, trailer frames, and industrial braces. In stock Los Angeles. Learn More

A36 Hot Rolled Steel Channel, C12 x 25.0, measuring 12" deep with a 3.047" flange and 0.387" web thickness, in 20-foot lengths. Conforms to ASTM A36 with 36,000 PSI minimum yield strength. Excellent for structural framing, equipment bases, and trailer frames where strength and weldability are crucial. This large section provides robust load-bearing support. In stock for Los Angeles pickup. Learn More

5" x 10 lbs/ft Hot Rolled Steel Standard I-Beam, 20 ft length. Conforms to ASTM A36, providing a minimum yield strength of 36,000 PSI and excellent weldability for easy fabrication. Its dimensions (5" Height x 3" Flange) make it a robust choice for structural framing, machinery bases, and support girders. In stock for same-day Los Angeles pickup. Learn More

21/32" x 48" x 120" A36 Hot Rolled Steel Plate. This structural-grade plate meets ASTM A36 standards and offers a minimum yield strength of 36,000 PSI. Its excellent weldability and good formability make it a reliable choice for heavy-duty applications. This large thickness is ideal for column base plates, equipment mounting pads, and general fabrication projects requiring robust support. In stock for same-day Los Angeles pickup. Learn More

3" x 3" x 1/4" 304 Stainless Steel Angle, 240" length. Conforms to ASTM A276, offering 73,200 PSI tensile strength, excellent corrosion resistance, and superior weldability. This medium-sized angle is ideal for structural framing, equipment bases, shelving, and architectural trim. The durable, non-magnetic properties make it suitable for food processing and construction applications. In stock for immediate Los Angeles pickup. Learn More

4" x 3/4" 304 Stainless Steel Flat Bar, available in 144" lengths. Conforms to ASTM A276, offering excellent corrosion resistance and weldability with 73,200 PSI tensile strength. This large-format bar is ideal for fabricating heavy structural supports, gussets, base plates, and equipment mounting. Its strength makes it a reliable choice for industrial and architectural applications. In stock for Los Angeles pickup. Learn More

2" x 2" x 1/4" Type 304 Stainless Steel Angle, 240" length. Conforms to ASTM A276, offering excellent corrosion resistance and weldability with 73,200 PSI tensile strength. This versatile, medium-sized angle is ideal for structural framing, equipment bases, shelving, and architectural trim where both strength and a clean finish are required. In stock for immediate Los Angeles pickup or delivery. Learn More

3" x 1/2" 1018 Cold Rolled Flat Bar in 144" lengths. Conforms to ASTM A108 and features a tensile strength of 63,800 PSI. This grade offers excellent machinability and good weldability combined with a smooth, scale-free surface. Its medium width is ideal for structural bracing, machine ways, and durable base plates. In stock for immediate Los Angeles pickup. Learn More

This 4" x 1/2" Hot Rolled Steel Flat Bar is a general-purpose structural A36 grade steel, conforming to ASTM A36. It offers a minimum yield strength of 36,000 PSI and excellent weldability. The large width makes it ideal for heavy structural applications, base plates, support braces, and industrial equipment fabrication. In stock for immediate cutting and pickup in Los Angeles. Learn More

A 3/16" x 4" Cold Rolled 1018 Steel Flat Bar, 144 inches long. Produced to ASTM A108 standards, this bar provides a tensile strength of 63,800 PSI, tight dimensional tolerances, and excellent machinability. The smooth, scale-free surface is ideal for applications requiring a clean finish. Suitable for base plates, structural components, and machine parts. In stock Los Angeles. Learn More

3" x 3" Hot Rolled Steel Square Tube with a 0.188" wall, 240" length. Conforms to ASTM A500 Grade B with 58,000 PSI tensile strength and excellent weldability. This structural tubing, also known as HSS, provides a high strength-to-weight ratio. Ideal for building frames, equipment bases, trailer components, and general fabrication projects. In stock for Los Angeles pickup. Learn More