Search results for: 'good bobco metal coat'

This 1-1/2" x 3/16" Cold Rolled Flat Bar is made from 1018 steel, conforming to ASTM A108 standards. It offers 63,800 PSI tensile strength, a smooth, scale-free surface, and tight dimensional tolerances. With good machinability and weldability, it's ideal for manufacturing brackets, base plates, and machine components. Available for same-day pickup in Los Angeles. Learn More

This 6061 Aluminum Flat Bar measures 2-1/2" wide by 1/8" thick. A highly versatile structural alloy, 6061-T6 conforms to ASTM B211 and offers 45,000 PSI tensile strength, excellent corrosion resistance, and good machinability. Its medium width is ideal for structural bracing, machine ways, base plates, and custom fabricated parts. In stock for same-day cutting and pickup in Los Angeles. Learn More

12 Gauge (48" x 120") Cold Rolled Steel Sheet, typically 1018 grade. Conforms to ASTM A1008 specifications and provides a tensile strength of 63,800 PSI. The cold reduction process creates a smooth, clean surface finish and tight dimensional tolerances, making it ideal for forming and welding. Excellent for automotive panels, appliance casings, and equipment enclosures. In stock for Los Angeles pickup. Learn More

3/16" 1018 Cold Rolled Steel Hex Bar in 144" lengths. Produced to ASTM A108 specifications, this bar offers a 63,800 PSI tensile strength, tight dimensional tolerances, and a clean, smooth surface finish. Its good machinability makes it ideal for producing small fasteners, fittings, and precision hardware. In stock for Los Angeles pickup. Learn More

0.188" thick 3003-H14 Aluminum Diamond Plate, measuring 48" x 120" (4x10 ft). Conforms to ASTM B209 standards with 22,000 PSI tensile strength. This medium-thickness plate provides excellent workability, good corrosion resistance, and a non-slip surface. Ideal for trailer flooring, running boards, and protective wall panels. In stock for immediate cutting and pickup in Los Angeles. Learn More

A36 Hot Rolled Steel Flat Bar measuring 2-1/2 inches wide by 1 inch thick, sold in 20-foot lengths. This structural steel meets ASTM A36 standards and provides a minimum yield strength of 36,000 PSI. Its excellent weldability and good formability make it a top choice for fabrication. This medium-sized bar is ideal for structural bracing, equipment frames, and general repairs. In stock and available for pickup in Los Angeles. Learn More

This 3/4" diameter 1018 Cold Rolled Round Bar is a 144-inch low-carbon steel product conforming to ASTM A108. It offers a tensile strength of 63,800 PSI, superior dimensional accuracy, and a smooth, scale-free surface. Known for its excellent machinability and good weldability, it is ideal for producing shafts, axles, and precision machined components. In stock for immediate pickup in Los Angeles. Learn More

26 Gauge Galvanized Steel PBR (Purlin Bearing Rib) panel, 36 inches wide by 192 inches (16 ft) long. Conforms to ASTM A653, offering excellent corrosion resistance from its protective zinc coating. Ideal for commercial roofing, agricultural siding, and residential projects, providing a durable, low-maintenance exterior. In stock for same-day pickup in Los Angeles. Learn More

Galvanized PBR sheet, 26 Gauge x 36 inches x 168 inches. Conforms to ASTM A653. Features a protective zinc coating for excellent corrosion resistance. The PBR (Purlin-Bearing Rib) profile provides structural strength for roofing and siding. Lightweight and durable, it's ideal for agricultural, commercial, and residential buildings. In stock Los Angeles. Learn More

3/4" x 16 gauge Galvanized Square Tube, 24' length. Conforms to ASTM A500 Grade B with a 58,000 PSI tensile strength. The hot-dip zinc coating provides excellent corrosion resistance for outdoor applications. This small-profile tube is ideal for lightweight frames, gates, railings, and agricultural structures. In stock for immediate pickup in Los Angeles. Learn More

A 26 Gauge x 36" x 240" Galvanized PBR Panel, manufactured to ASTM A653 standards. Features a protective zinc coating applied via a hot-dip process for excellent corrosion and rust resistance. The underlying steel provides up to 80,000 PSI tensile strength. Ideal for residential roofing, commercial siding, and agricultural structures. In stock Los Angeles. Learn More

1-3/8" diameter 6061-T6 Aluminum Round Bar, 144" length. This versatile alloy conforms to ASTM B211 and provides 45,000 PSI tensile strength, good machinability, and excellent corrosion resistance. Its medium diameter is ideal for shafts, axles, structural components, and custom machined parts requiring a high strength-to-weight ratio. In stock for same-day Los Angeles pickup. Learn More

26 Gauge Galvanized PBR Steel Sheet, measuring 36 inches wide by 120 inches long. Conforming to ASTM A653, this panel features a protective zinc coating for excellent corrosion resistance. With a base steel yield strength of 36,000 PSI, it's ideal for roofing, siding, and agricultural structures. Its lightweight profile simplifies installation. In stock for Los Angeles pickup. Learn More

4" NPS Schedule 40 Galvanized Steel Pipe, sold in 21-foot lengths. Conforming to ASTM A53 Grade B, this pipe has a 60,000 PSI tensile strength and a hot-dip zinc coating for superior corrosion resistance. Its large diameter is ideal for main water lines, industrial process piping, and structural columns. In stock for same-day Los Angeles pickup. Learn More

5/8" x 16 gauge A500B Galvanized Steel Square Tube, 24 ft length. Conforms to ASTM A500 with 58,000 PSI tensile strength. The hot-dip zinc coating provides excellent corrosion resistance for outdoor applications. This small profile is ideal for light structural frames, gates, railings, and agricultural uses. In stock for Los Angeles pickup. Learn More

1/2" x 3/4" 1018 Cold Rolled Steel Flat Bar, sold in 144" lengths. This product meets ASTM A108 specifications and offers 63,800 PSI tensile strength, a smooth surface finish, and tight dimensional tolerances. Its excellent machinability and good weldability make it a versatile choice. The small profile is ideal for brackets, straps, and shims. In stock for Los Angeles pickup. Learn More

2" x 1/8" 1018 Cold Rolled Steel Flat Bar, 144" length. Conforming to ASTM A108, this cold finished bar offers a smooth, scale-free surface and tight dimensional tolerances. With a tensile strength of 63,800 PSI and good machinability, it's ideal for manufacturing base plates, machine ways, and structural bracing. In stock for immediate cutting and Los Angeles pickup. Learn More

3" x 1/2" 1018 Cold Rolled Flat Bar in 144" lengths. Conforms to ASTM A108 and features a tensile strength of 63,800 PSI. This grade offers excellent machinability and good weldability combined with a smooth, scale-free surface. Its medium width is ideal for structural bracing, machine ways, and durable base plates. In stock for immediate Los Angeles pickup. Learn More

1-1/2" x 16 Gauge Galvanized Square Tube, sold in 24-foot lengths. Conforms to ASTM A500 Grade B with 58,000 PSI tensile strength. The hot-dip zinc coating provides excellent corrosion resistance for outdoor applications. Its medium size is ideal for trailer frames, gate construction, and structural supports. In stock for same-day Los Angeles pickup. Learn More

1/2" NPS Schedule 40 Galvanized Steel Pipe in 21-foot lengths. Conforms to ASTM A53 Grade B with a 60,000 PSI tensile strength. The hot-dip zinc coating provides superior corrosion resistance for outdoor and high-moisture environments. This small diameter is ideal for plumbing, non-potable water lines, conduit, and residential handrails. In stock for same-day Los Angeles pickup. Learn More

24 Gauge Galvanized Steel B-Deck measuring 36 inches wide by 120 inches long. This structural panel conforms to ASTM A653, providing excellent corrosion resistance from its protective zinc coating. With a high strength-to-weight ratio, it is an economical solution for roofing, siding, and floor decking systems. Ideal for residential, commercial, and agricultural construction. In stock for immediate Los Angeles pickup. Learn More

A 1/2" x 4" Hex Lag Screw featuring a protective zinc plating per ASTM B633. Manufactured from low carbon steel compliant with ASTM A307 standards for reliable performance in light-duty framing and construction. Learn More

1/8 inch diameter 6061-T6 Aluminum Round Bar, 144 inches long. This versatile alloy conforms to ASTM B211 and features 45,000 PSI tensile strength, excellent machinability, and superior corrosion resistance. Its small diameter is perfect for producing pins, dowels, small shafts, and other precision turned parts requiring high strength and a good surface finish. In stock for same-day pickup in Los Angeles. Learn More

5/16" Cold Rolled 1018 Hexagon Bar, 144" length. Meets ASTM A108 specifications. This low-carbon steel bar offers 63,800 PSI tensile strength, a smooth surface finish, and tight dimensional tolerances from the cold drawing process. Its excellent machinability and good weldability make it suitable for producing fasteners, shafts, hydraulic fittings, and other precision machined components. In stock for same-day Los Angeles pickup. Learn More

24 Gauge Galvanized B-Deck sheet, measuring 36" x 72". Conforming to ASTM A653, this structural panel features a protective zinc coating for excellent corrosion resistance. The base steel offers a minimum yield strength of 36,000 PSI. Ideal for roofing, floor decking, and siding in commercial and residential construction. Lightweight yet strong, it provides a durable, low-maintenance solution. In stock for Los Angeles pickup. Learn More

6-inch Nominal Pipe Size (NPS) Schedule 40 Galvanized Pipe, 252-inch length. Conforms to ASTM A53 Grade B, delivering 60,000 PSI tensile strength and excellent weldability. The hot-dip zinc coating provides superior corrosion resistance for outdoor and high-moisture environments. Large diameter is ideal for main water lines, industrial process piping, and heavy structural columns. In stock Los Angeles. Learn More

24 Gauge Galvanized B-Deck sheet measuring 36" wide by 96" long. Produced from zinc-coated carbon steel conforming to ASTM A653, it provides excellent corrosion resistance and structural integrity. The 'B' profile is engineered for high strength-to-weight performance, making it ideal for roof decks, mezzanine floors, and structural siding applications. In stock for immediate Los Angeles pickup. Learn More

2-1/2" nominal Schedule 40 Galvanized Steel Pipe, 21-foot length. Conforms to ASTM A53 Grade B, with 60,000 PSI tensile strength for structural integrity. The hot-dip zinc coating provides excellent corrosion and rust resistance. Large diameter is ideal for main water lines, industrial piping, and structural columns. In stock for immediate Los Angeles pickup. Learn More

This high-performance 0.8mm (.030") MIG welding wire is engineered for superior results in fabrication and repair. AWS/ASME certified, it ensures strong, consistent welds on mild and carbon steels. Packaged in convenient 11 LBS (1KG) spools for project efficiency. Learn More

3" NPS Schedule 40 Galvanized Steel Pipe, sold in 21 ft lengths. Conforms to ASTM A53 Grade B with a 60,000 PSI tensile strength. The hot-dip zinc coating provides excellent corrosion resistance for outdoor and high-moisture environments. This large diameter pipe is ideal for main water lines, industrial process piping, structural columns, and protective barriers. In stock for same-day Los Angeles pickup. Learn More

This industrial-grade 0.9mm (.035) MIG welding wire is engineered for high-performance fabrication and repair. Certified to meet AWS/ASME standards, it provides a stable arc and minimal spatter for clean, strong welds on various steel types. Available in an 11 LBS (1KG) spool. Learn More

This 0.9mm (.035") flux core welding wire is engineered for high-performance welding without external shielding gas. It meets AWS/ASME certification standards, providing reliable, strong welds for various steel fabrication projects. Packaged in a convenient 2.2 LBS (1KG) spool for portability and ease of use. Learn More

1-1/4" x 1-1/4" Galvanized Square Tube with a 16 gauge wall, sold in 24-foot lengths. Manufactured to ASTM A500 Grade B standards, this structural tubing has a 58,000 PSI tensile strength. The hot-dip galvanized zinc coating provides excellent corrosion resistance for outdoor applications. Ideal for structural frames, gates, trailer construction, and railings. In stock for Los Angeles pickup. Learn More

1-1/4" NPS Schedule 40 Galvanized Steel Pipe, 252" length. Conforming to ASTM A53 Grade B, this pipe provides a minimum 60,000 PSI tensile strength and superior corrosion resistance from its hot-dip zinc coating. It is ideal for outdoor structural applications like handrails, fencing, and scaffolding, as well as for plumbing and fluid conveyance. In stock Los Angeles. Learn More

1" x 1" Galvanized Steel Square Tube with a 16 gauge wall, sold in a 24-foot length. Conforming to ASTM A500 Grade B, this structural tubing provides a minimum yield strength of 46,000 PSI. The hot-dip galvanized zinc coating delivers excellent corrosion and rust resistance, making it ideal for outdoor frames, trailers, and gates. In stock for Los Angeles pickup. Learn More

2" x 2" Galvanized Steel Square Tube with a 16 gauge wall, 24-foot length. Conforms to ASTM A500 Grade B with 58,000 PSI tensile strength. The hot-dip galvanized zinc coating provides excellent corrosion resistance for outdoor applications. This medium-sized tube is ideal for fabricating trailer frames, gate frames, and structural supports. In stock for Los Angeles pickup. Learn More

3/4 inch Nominal Pipe Size (NPS) Schedule 40 Galvanized Steel Pipe, 21 ft length. Manufactured to ASTM A53 Grade B specifications, this pipe offers a minimum tensile strength of 60,000 PSI and superior corrosion resistance from its hot-dip zinc coating. Ideal for outdoor structures, non-potable water plumbing, handrails, and fencing. In stock and available for same-day pickup in Los Angeles. Learn More

5/16 inch diameter 304 Stainless Steel Round Bar, 144" length. Conforms to ASTM A276 and delivers 73,200 PSI tensile strength. This versatile grade combines excellent corrosion resistance with superior weldability and good formability. Its small diameter is ideal for creating precision pins, dowels, fastener blanks, and small shafts. In stock for same-day Los Angeles pickup. Learn More

0.125" thick 3003 Aluminum Diamond Plate, available in 4' x 10' sheets. Conforms to ASTM B209, offering 22,000 PSI tensile strength, good workability, and excellent corrosion resistance. The raised diamond pattern provides a durable, non-slip surface. This medium-thickness plate is ideal for structural panels, vehicle running boards, and industrial catwalks. In stock for immediate Los Angeles pickup. Learn More

12" x 1/2" A36 Hot Rolled Steel Flat Bar, 240" length. Conforms to ASTM A36 with a minimum yield strength of 36,000 PSI. This large-format structural bar offers excellent weldability and good machinability. Ideal for heavy-duty applications like base plates, structural supports, die components, and equipment frames. In stock for same-day Los Angeles pickup. Learn More

This industrial-grade 0.8mm (.030") MIG welding wire is supplied on 33 LBS spools. Manufactured to meet or exceed AWS/ASME certification standards, it ensures consistent performance for professional fabrication and repair on mild and low-alloy steels. Learn More

This high-quality 0.9mm (0.035") MIG welding wire is designed for superior performance in industrial applications. Certified to meet AWS/ASME standards, this steel alloy wire provides a stable arc and minimal spatter for clean, strong welds. Ideal for fabrication, automotive repair, and MRO projects. Learn More

The C-Scroll (5112A) is a classic decorative element forged from high-quality Class 25-30 gray iron. This architectural-grade component is designed to add an elegant, traditional finish to custom fences, gates, and railings in fabrication projects. Learn More

0.25" x 48" x 120" 3003 Aluminum Diamond Plate. Conforms to ASTM B209, offering 22,000 PSI tensile strength, good workability, and excellent corrosion resistance. The raised diamond pattern provides a durable, non-slip surface. This medium thickness plate is ideal for structural panels, machine guards, vehicle body panels, and high-traffic flooring. In stock for same-day Los Angeles pickup. Learn More

This 2 Inch Post Ball Cap provides a durable, decorative finish for square or round tubing. Fabricated from Class 25-30 gray cast iron, it is designed for welding onto fences, gates, and handrails, offering a classic architectural look. Learn More

5 inch Nominal Pipe Size (NPS) Galvanized Steel Pipe with a Schedule 40 wall thickness (0.258"), available in 21 ft lengths. Conforms to ASTM A53 Grade B with 60,000 PSI tensile strength. The hot-dip zinc coating provides superior corrosion resistance for outdoor and high-moisture use. This large diameter pipe is ideal for structural columns, main water lines, and industrial process piping. In stock for Los Angeles pickup. Learn More

304 Stainless Steel Flat Bar, 1-1/2" wide by 1/4" thick. Conforms to ASTM A276, this versatile bar offers excellent corrosion resistance, weldability, and 73,200 PSI tensile strength. Its medium size is ideal for structural bracing, machine ways, equipment frames, and architectural trim. Annealed condition provides good formability. In stock and available for same-day pickup in Los Angeles. Learn More

A 0.032" thick, 48" x 120" sheet of 3003-H14 aluminum. Conforms to ASTM B209, offering a balance of moderate strength (22,000 PSI tensile) and excellent formability. This thin gauge is lightweight, weldable, and corrosion-resistant, making it ideal for HVAC ductwork, electronic enclosures, formed brackets, and decorative panels. In stock Los Angeles. Learn More

1/8" x 1/4" 1018 Cold Rolled Steel Flat Bar, 144" length. Conforms to ASTM A108 with 63,800 PSI tensile strength, good weldability, and a 70% machinability rating. The cold drawn process provides a smooth, scale-free finish and tight dimensional tolerances. Its small profile is ideal for brackets, shims, straps, and small frame stock. In stock for Los Angeles pickup. Learn More

The 1-¼” Single Lockbox with a single hole is an essential component for security gates and fences. Constructed from high-quality, weldable steel, it provides a durable housing for gate locks. Designed for easy installation and long-term performance in commercial and residential applications. Learn More

This 1/8" 6013 All-Purpose Welding Rod is an AWS/ASME certified electrode designed for versatile performance. Ideal for general fabrication and repair on mild steel, it offers a stable arc and easy slag removal. Packaged in a convenient 10 LB container for MRO and project use. Learn More

1-1/4" x 3/8" 1018 Cold Rolled Flat Bar, sold in 144" lengths, conforms to ASTM A108. It features a tensile strength of 63,800 PSI, excellent machinability, and good weldability. The cold-drawn process provides a smooth, scale-free surface and tight dimensional tolerances. This medium-width bar is ideal for structural bracing, machine ways, and general fabrication projects. In stock for Los Angeles pickup. Learn More

A 4" wide by 1/8" thick 1018 Cold Rolled Steel Flat Bar, supplied in a 144" length. This bar meets ASTM A108 standards and features 63,800 PSI tensile strength, tight dimensional tolerances, and good weldability. The cold drawn finish provides a smooth, scale-free surface ideal for machining. Its large width makes it suitable for base plates, structural supports, and die components. In stock Los Angeles. Learn More

AWS A5.1 E6013 certified all-purpose welding rod for mild steel applications. This 3/32" diameter electrode provides a smooth, stable arc and easy slag removal, ideal for general fabrication and MRO. Designed for AC or DC operation in all positions. Learn More

3-1/2 inch NPS Schedule 40 Galvanized Steel Pipe. Conforming to ASTM A53 Grade B, this pipe features a hot-dip zinc coating for superior corrosion resistance and 60,000 PSI tensile strength. Its durable, weather-resistant finish makes it ideal for outdoor structures, water lines, and safety barriers. Large diameter suitable for main water lines and structural columns. In stock for Los Angeles pickup. Learn More

This 1/4" x 4-1/4" Cobalt Industrial Drill Bit is engineered from M35 steel with 5% cobalt for superior heat resistance. Conforming to ANSI/ASME B94.11M standards, its 135° split-point tip ensures precise starts and is ideal for drilling into stainless steel and cast iron. Learn More

The Super Tool Press Pliers 10" are engineered from high-strength forged alloy steel for superior gripping power and durability. Designed to meet ASME B107 standards, these industrial-grade pliers are essential for demanding fabrication and MRO tasks. Learn More

The Hook Lock Double Cylinder provides robust security for commercial and industrial gates. Featuring a hardened steel hook bolt and dual-keyed access, this lock is engineered for high-traffic applications and enhanced access control, designed to meet key industry standards for durability and security. Learn More

1" OD x 0.065" wall Hot Rolled Steel Round Tube, available in 240-inch lengths. Produced to ASTM A500 Grade B specifications, this structural tubing provides 58,000 PSI tensile strength and excellent weldability. Its medium diameter is ideal for fabricating equipment frames, handrails, support columns, and roll cages. The hot-rolled finish is ready for welding and can be painted or coated. In stock for Los Angeles pickup. Learn More

1-1/4" NPS Schedule 40 pipe manufactured from 6063-T5 aluminum alloy. This architectural aluminum conforms to ASTM B241 and offers 27,000 PSI tensile strength. Known for its superior surface finish, excellent corrosion resistance, and good workability, it is ideal for handrails, frames, and furniture. This medium-sized pipe provides a balance of strength and weight. In stock for Los Angeles pickup. Learn More

This 1-1/4" square pressed steel cap provides a clean, finished look for fence posts and railings. Made from durable, weldable mild steel, it protects post interiors from debris and weather. Ideal for ornamental and security fencing applications. Learn More

This 2" Square Pressed Steel Cap provides a clean, protective finish for square tubing and fence posts. Fabricated from durable, weldable mild steel, it prevents water ingress and adds a professional aesthetic to any ornamental ironwork project. Learn More

This 3/16" x 4-1/4" industrial cobalt drill bit is engineered from M35 steel (5% cobalt) for superior heat resistance. Its 135° split-point tip ensures precise, no-walk starts on hard materials like stainless steel and cast iron. Manufactured to meet industrial performance standards for durability and accuracy. Learn More

1" x 1/4" Hot Rolled Steel Flat Bar, 240" length. Conforms to ASTM A36, a low-carbon structural steel with 58,000 PSI tensile strength and excellent weldability. This versatile bar is easy to form, drill, and machine. Its medium size is ideal for structural bracing, equipment frames, base plates, and general fabrication projects. In stock for immediate Los Angeles pickup. Learn More

A 3/8" x 1-1/4" 6061-T6 Aluminum Flat Bar, supplied in a 144" length. This versatile bar conforms to ASTM B211 and features a 45,000 PSI tensile strength, good machinability, and excellent corrosion resistance. Its medium width makes it ideal for structural bracing, support brackets, machine ways, and general fabrication projects. In stock for same-day pickup in Los Angeles. Learn More

The 1-1/4 Inch Square Plastic Cap provides a clean, finished look for square tubing applications. Made from durable, weather-resistant black plastic, it protects against sharp edges and internal debris. This cap offers a secure press-fit for reliability in fencing, furniture, and equipment fabrication. Learn More

Our 1-1/4 Double Lock Box is a durable gate hardware component crafted from high-strength Class 25-30 gray cast iron. Designed for 1-1/4" square tubing, it provides a secure housing for lock mechanisms in ornamental fences and security gates. Ideal for industrial fabrication and commercial applications. Learn More

Durable 1-1/2 inch square plastic cap designed for a secure fit on square tubing. Made from high-quality, weather-resistant Low-Density Polyethylene (LDPE), this cap provides a clean, finished appearance and protects against debris. Learn More

3" x 1.41" 6061-T6 Aluminum Channel, 144" length. Conforms to ASTM B308, offering 45,000 PSI tensile strength, excellent weldability, and superior corrosion resistance. This versatile structural profile combines a high strength-to-weight ratio with good machinability. Ideal for structural framing, equipment supports, machine bases, and architectural applications. In stock for Los Angeles pickup. Learn More

Galvanized Slotted Angle is a versatile framing material made from durable 16 gauge steel. Featuring a corrosion-resistant galvanized finish meeting ASTM A653 standards, it's ideal for constructing custom racks, supports, and maintenance frames. The pre-punched slotted pattern allows for easy, bolt-together assembly. Learn More

This 6 Inches Tube Ring is a versatile ornamental component engineered for fabricating handrails, fences, and gates. Constructed from durable, weldable steel, it provides a secure and decorative connection point. Ideal for both new construction and MRO projects requiring reliable hardware. Learn More

This 1-¼” Single Hole Lockbox is fabricated from high-quality, weldable steel. Designed for security gate and fence applications, it provides a durable housing for standard lock mechanisms. Its single-hole configuration ensures straightforward installation and compatibility. Learn More

This 1-¼" x 3-¼" L-Clip Welding Tab is a high-quality fabrication component made from durable, weldable mild steel. Designed for structural connections and reinforcement, it conforms to AWS welding practices for strength and reliability. Ideal for creating strong, permanent weld points in MRO and new construction projects. Learn More

Our 3-1/2x2-1/4 Weldable Butt Hinges are engineered from high-strength, low-carbon steel for maximum weld penetration and durability. These components are designed for heavy-duty applications where a permanent, strong pivot is required. Ideal for steel gates, doors, and MRO projects. Learn More

Our 2 Inch Square Plastic Cap is an industrial-grade finishing component made from durable, low-density polyethylene (LDPE). It provides a secure, press-fit closure for square tubing, protecting against moisture and debris while offering a clean, professional appearance. Learn More

This 5-inch tube ring is crafted from high-quality Class 25-30 gray cast iron, providing excellent durability for ornamental and architectural applications. Designed for seamless integration with standard tubing for fences, gates, and handrails. Learn More

The 3 Inch Post Ball Cap is a durable, decorative finial for fence posts and railings. Manufactured from high-strength Class 25-30 gray iron, it provides a classic architectural finish and protects the post top from weather. Ideal for both new fabrication and MRO projects. Learn More

Our 5-inch barrel hinges are constructed from high-strength, weldable steel for maximum durability. Engineered for heavy-duty gates and doors, these hinges provide a smooth, reliable pivot point for industrial fabrication and MRO projects. The plateless design allows for direct welding to steel surfaces. Learn More

This 2-1/2" Square Pressed Steel Cap provides a durable, clean finish for square tubing. Made from commercial-grade pressed steel, it is ideal for ornamental fencing, handrails, and gates. The cap is supplied with a raw, weldable finish for easy fabrication. Learn More

The S-Scroll (5024D) is a decorative hardware element crafted from high-quality Class 25-30 gray iron. Its classic design is ideal for adding architectural detail to fences, gates, and furniture. This industrial-grade component ensures durability and an authentic forged appearance. Learn More

The 251V is a high-quality decorative ornamental element crafted from Class 25-30 gray iron. Its durable composition is ideal for architectural detailing, custom fencing, gates, and other fabrication projects requiring classic, robust designs. Learn More

Our 7-inch barrel hinges are engineered from heavy-duty, weldable carbon steel for maximum durability and strength. Designed for high-load applications, these hinges provide a smooth, reliable pivot for industrial gates and security doors. The robust construction ensures long-lasting performance in demanding MRO and fabrication environments. Learn More

This 1 Inch Square Plastic Cap provides a durable, finished look for square tubing. Made from UV-resistant LDPE plastic, it protects against moisture and debris. Ideal for fencing, furniture, and fabrication projects. Learn More

This 3/32" 6013 all-purpose welding rod is an AWS/ASME certified electrode ideal for general fabrication. Designed for a stable arc on AC/DC, it delivers smooth beads on mild steel. A versatile choice for MRO and light structural work. Learn More

This 4-1/2 inch Tube Ring is crafted from A36 carbon steel for excellent weldability and structural strength. Conforming to ASTM A36 specifications, it offers a minimum tensile strength of 58,000 PSI. Its large diameter makes it ideal for fabricating heavy-duty handrails, architectural elements, and custom gate designs. A reliable hardware component for fabricators and metalworkers. In stock for same-day pickup in Los Angeles. Learn More

The 1-1/2 Double Lock Box is an industrial-grade hardware component for fabricating secure gate and fence locking systems. Made from weldable steel, it provides a durable housing for standard lock mechanisms, making it ideal for ornamental and security applications. Learn More

Our 4-inch Tube Ring is a high-quality decorative component forged from industrial-grade Class 25-30 gray cast iron. Designed for durability and easy integration, it's ideal for ornamental fencing, gates, and architectural fabrication projects. Learn More

The Flower Welding Tab 1 x 3 is a versatile fabrication component made from high-quality, weldable mild steel. These tabs provide secure mounting and connection points, ideal for various industrial and ornamental welding projects. They are designed for reliability and ease of use in professional fabrication settings. Learn More

A 16 gauge galvanized steel corner guard providing robust impact and abrasion resistance for walls and edges. Manufactured to meet ASTM A653 standards for corrosion protection, this 2-1/2" x 2-1/2" x 36" guard is ideal for high-traffic commercial and industrial environments. The G90 galvanized finish ensures long-lasting durability. Learn More

These 10" off-white gloves are crafted from soft, durable goat leather for excellent dexterity and tactile sensitivity. They are ANSI/ISEA 105 rated, making them ideal for general handling, assembly, and MRO tasks requiring reliable hand protection. Learn More

The 4 Sq Pressed Steel Cap provides a durable, clean finish for square tubing and fence posts. Fabricated from high-quality pressed steel for excellent weldability and longevity. Ideal for ornamental ironwork and security fencing projects. Learn More

The C199 is a durable cast iron component designed for 1-1/2" cap rail systems. This ornamental hardware is engineered for a precise fit in ADA-compliant handrail and fencing applications, providing both structural integrity and a decorative finish. Learn More

This 1-1/2" Sq Pressed Steel Cap provides a clean, protective finish for square tubing. Made from durable, weldable pressed steel, it is designed for ornamental fencing, gates, and railing projects. Meets industry standards for dimensional accuracy and fit. Learn More

Galvanized Slotted Angle manufactured from durable 16 gauge steel for reliable performance in light to medium-duty applications. This 1-1/4" x 1-1/4" angle features a hot-dip galvanized finish conforming to ASTM A653 for superior corrosion resistance, ideal for custom framing, shelving, and MRO projects. Learn More

The C199L is a decorative handrail fitting for 1-1/4" cap rails. Manufactured from durable Class 25-30 gray iron, this component provides a secure and aesthetic termination for architectural and ADA-compliant railing systems. Learn More

This 1/4" x 2-1/2" Hex Lag Screw is manufactured from low carbon steel, conforming to ASTM A307 strength standards. The zinc-plated finish (ASTM B633) provides essential corrosion resistance, making it ideal for wood construction and framing applications. Learn More

This large industrial slide bolt features a robust 3/4" diameter steel shaft and durable black finish. Engineered for reliable security on heavy-duty gates, doors, and enclosures. Ideal for fabrication and MRO applications. Learn More

This 8 x ½ Pan Head Phillips Truss Screw is a versatile fastener made from low carbon steel. It features a zinc plating with CR3+ passivate compliant with ASTM B633 for reliable corrosion resistance. The wide truss head provides an excellent bearing surface for thin materials. Learn More

This 4” x 1/16” x ⅜” cut-off wheel is an industrial-grade abrasive tool for high-speed cutting. Compliant with ANSI B7.1 safety standards, it features fiberglass reinforcement for enhanced durability and stability at its maximum 22,000 RPM rating. Learn More

1-1/4" x 1-1/4" 304 Stainless Steel Square Tube with a 0.065" wall and a 180-grit satin finish. Conforming to ASTM A269, it offers 73,200 PSI tensile strength, excellent corrosion resistance, and superior weldability. Its combination of structural integrity and polished appearance makes it ideal for architectural handrails, support frames, and decorative applications. In stock for Los Angeles pickup. Learn More