Search results for: 'dark thick drive 1 8'

3" x 1.41" 6061-T6 Aluminum Channel, 144" length. Conforms to ASTM B308, offering 45,000 PSI tensile strength, excellent weldability, and superior corrosion resistance. This versatile structural profile combines a high strength-to-weight ratio with good machinability. Ideal for structural framing, equipment supports, machine bases, and architectural applications. In stock for Los Angeles pickup. Learn More

2" x 2" Galvanized Steel Square Tube with a 16 gauge wall, 24-foot length. Conforms to ASTM A500 Grade B with 58,000 PSI tensile strength. The hot-dip galvanized zinc coating provides excellent corrosion resistance for outdoor applications. This medium-sized tube is ideal for fabricating trailer frames, gate frames, and structural supports. In stock for Los Angeles pickup. Learn More

0.025" x 48" x 120" (4' x 10') sheet of 3003-H14 aluminum. This versatile alloy conforms to ASTM B209 and offers moderate strength, excellent formability, and good corrosion resistance. The thin 0.025" gauge is ideal for forming brackets, electronic enclosures, decorative panels, and HVAC ductwork where light weight and workability are key. In stock for same-day Los Angeles pickup. Learn More

Our 5-inch barrel hinges are constructed from high-strength, weldable steel for maximum durability. Engineered for heavy-duty gates and doors, these hinges provide a smooth, reliable pivot point for industrial fabrication and MRO projects. The plateless design allows for direct welding to steel surfaces. Learn More

This 6 Inch Solid V-Groove Wheel is engineered for high-capacity applications, supporting loads up to 2000 lbs. Manufactured from solid steel to industrial standards, it provides durable and reliable performance on angle iron tracks for gates and carts. Learn More

3/4 inch Nominal Pipe Size (NPS) Schedule 40 Galvanized Steel Pipe, 21 ft length. Manufactured to ASTM A53 Grade B specifications, this pipe offers a minimum tensile strength of 60,000 PSI and superior corrosion resistance from its hot-dip zinc coating. Ideal for outdoor structures, non-potable water plumbing, handrails, and fencing. In stock and available for same-day pickup in Los Angeles. Learn More

The Super Tool Press Pliers 10" are engineered from high-strength forged alloy steel for superior gripping power and durability. Designed to meet ASME B107 standards, these industrial-grade pliers are essential for demanding fabrication and MRO tasks. Learn More

Our industrial-grade Black Nitrile Disposable Gloves offer superior puncture and chemical resistance. These powder-free gloves are ANSI/ISEA 105 rated for reliable hand protection in demanding MRO, fabrication, and general-purpose applications. Packaged in a convenient 100-piece box. Learn More

Protect high-traffic areas with our durable 16-gauge Galvanized Steel Corner Guard. Featuring a G90 galvanized coating for superior corrosion resistance, this 2" x 2" x 36" guard provides robust impact protection for commercial and industrial walls. Learn More

This 5/16" x 4" Hex Lag Screw is manufactured from durable low carbon steel to meet ASTM A307 performance standards. It features a corrosion-resistant zinc plating (per ASTM B633), making it ideal for construction and general framing applications. Learn More

3/4" OD x 0.065" wall 304 Stainless Steel Round Tube with a 180 grit polished finish. Conforms to ASTM A269 and offers 73,200 PSI tensile strength. This grade combines excellent corrosion resistance and weldability, making it ideal for architectural and decorative applications like handrails, guardrails, and trim. The polished surface provides a clean, aesthetic appearance. In stock for immediate Los Angeles pickup. Learn More

This industrial-grade, oil-based black primer is engineered for direct-to-metal (DTM) applications, providing a durable foundation for topcoats. Its robust alkyd formulation ensures excellent adhesion and superior corrosion resistance for fabrication and MRO projects. Learn More

6-inch Nominal Pipe Size (NPS) Schedule 40 Galvanized Pipe, 252-inch length. Conforms to ASTM A53 Grade B, delivering 60,000 PSI tensile strength and excellent weldability. The hot-dip zinc coating provides superior corrosion resistance for outdoor and high-moisture environments. Large diameter is ideal for main water lines, industrial process piping, and heavy structural columns. In stock Los Angeles. Learn More

2 inch Schedule 40 Hot Rolled Black Pipe. Conforms to ASTM A53 Grade B standards, offering 60,000 PSI tensile strength and excellent weldability for strong, reliable joints. This medium-sized pipe is ideal for plumbing mains, HVAC piping, fire sprinkler systems, and structural applications like handrails and support posts. In stock and ready for same-day pickup in Los Angeles. Learn More

0.0404" x 48" x 120" (4'x10') 3003-H14 Aluminum Sheet. Conforms to ASTM B209, offering a balance of moderate strength (22,000 PSI tensile) and excellent formability. Its good workability and corrosion resistance make it ideal for general fabrication. This thin gauge is perfect for HVAC ductwork, formed brackets, and decorative panels. In stock for same-day pickup in Los Angeles. Learn More

4" NPS Schedule 40 Galvanized Steel Pipe, sold in 21-foot lengths. Conforming to ASTM A53 Grade B, this pipe has a 60,000 PSI tensile strength and a hot-dip zinc coating for superior corrosion resistance. Its large diameter is ideal for main water lines, industrial process piping, and structural columns. In stock for same-day Los Angeles pickup. Learn More

0.032" x 48" x 120" 5052-H32 Aluminum Sheet. Conforms to ASTM B209 with 33,000 PSI tensile strength. This non-heat-treatable alloy offers excellent formability and superior corrosion resistance, especially in marine environments. Its thin gauge is ideal for creating formed brackets, electronic enclosures, and decorative panels. In stock for immediate pickup in Los Angeles. Learn More

0.063" x 48" x 120" 5052-H32 Aluminum Sheet. Conforming to ASTM B209, this sheet provides a balance of strength (33,000 PSI tensile) and excellent formability. Its superior corrosion resistance makes it ideal for marine environments, fuel tanks, and automotive body panels. This medium-gauge sheet offers excellent weldability for fabricated assemblies. Available for same-day pickup in Los Angeles. Learn More

This ½” x 3” Hex Lag Screw is manufactured from low-carbon steel for reliable performance in general construction and framing. It meets ASTM A307 specifications, providing a minimum tensile strength of 60,000 psi. The zinc-plated finish offers moderate corrosion resistance. Learn More

0.090" x 48" x 120" 3003-H14 Aluminum Sheet. Conforming to ASTM B209, this material features 22,000 PSI tensile strength, excellent formability, and good corrosion resistance. This versatile, medium-gauge sheet is ideal for vehicle body panels, machine guards, and general fabrication projects requiring moderate strength. In stock for immediate pickup in Los Angeles. Learn More

0.063" x 48" x 96" (4x8) sheet of 3003-H14 Aluminum. This versatile alloy meets ASTM B209 standards and provides an excellent combination of moderate strength (22,000 PSI tensile), high ductility, and superior corrosion resistance. Its excellent formability makes it ideal for general sheet metal work, HVAC ductwork, fuel tanks, and fan blades. In stock for immediate Los Angeles pickup. Learn More

0.040" x 48" x 120" sheet of 5052-H32 Aluminum, a non-heat-treatable alloy known for excellent formability and corrosion resistance. This sheet meets ASTM B209 standards and has a tensile strength of 33,000 PSI. Its thin gauge is ideal for creating formed brackets, electronic enclosures, and decorative panels. In stock Los Angeles. Learn More

0.080" x 48" x 120" 5052-H32 Aluminum Sheet. Conforms to ASTM B209. This non-heat-treatable alloy provides 33,000 PSI tensile strength, excellent formability, and superior corrosion resistance, especially in marine environments. Ideal for fuel tanks, boat hulls, and automotive body panels where workability and durability are critical. In stock for immediate Los Angeles pickup. Learn More

14 Gauge (0.075") Galvanized Steel Sheet, 48" x 120". Conforming to ASTM A653, this hot-dip zinc-coated steel provides excellent corrosion resistance for outdoor and high-moisture applications. Its base metal offers up to 80,000 PSI tensile strength, combining durability with formability. Ideal for HVAC ductwork, roofing panels, automotive components, and agricultural equipment. In stock for immediate Los Angeles pickup. Learn More

12 Gauge (48" x 120") Cold Rolled Steel Sheet, typically 1018 grade. Conforms to ASTM A1008 specifications and provides a tensile strength of 63,800 PSI. The cold reduction process creates a smooth, clean surface finish and tight dimensional tolerances, making it ideal for forming and welding. Excellent for automotive panels, appliance casings, and equipment enclosures. In stock for Los Angeles pickup. Learn More

20 Gauge Galvanized Steel Sheet, 48" x 120" (4' x 10'). Conforms to ASTM A653, featuring a protective zinc coating for excellent corrosion resistance in outdoor environments. This thin gauge sheet is ideal for forming brackets, electronic enclosures, decorative panels, and HVAC ductwork. It combines the strength of steel with the durability of galvanization. In stock for immediate Los Angeles pickup. Learn More

22 Gauge Galvanized Steel Sheet, measuring 48" x 120". This product conforms to ASTM A653 and features a protective hot-dip zinc coating for excellent corrosion resistance. Its thin gauge offers great formability, making it ideal for HVAC ductwork, flashing, automotive panels, and protective enclosures. Combines steel strength with long-term durability in outdoor or high-moisture environments. In stock for Los Angeles pickup. Learn More

14 Gauge Hot Rolled Diamond Plate, 48" x 120". Conforms to ASTM A786 (pattern) on an A36 steel base. This plate offers 58,000 PSI tensile strength, excellent weldability, and a durable, slip-resistant surface. Ideal for industrial flooring, ramps, truck beds, and stair treads where safety and durability are critical. In stock for same-day Los Angeles pickup. Learn More

Our 12-inch industrial door spring is engineered from high-tensile spring steel for maximum durability and cycle life. Designed to meet ASTM A227/A228 performance standards, it provides reliable tension for heavy-duty commercial and industrial doors. Features a corrosion-resistant zinc-plated finish for long-lasting use. Learn More

10 Gauge Cold Rolled Steel Sheet, 48" x 120". Made from commercial quality steel (1018 typical) with a tensile strength of 63,800 PSI. The cold rolling process provides a smooth, scale-free surface and tight dimensional tolerances, making it ideal for forming, stamping, and welding. Perfect for automotive panels, appliance casings, and equipment enclosures. In stock and ready for same-day pickup in Los Angeles. Learn More

11 Gauge Cold Rolled Steel Sheet, measuring 48" x 120". Produced from 1018 grade steel, this sheet conforms to ASTM A1008 standards and features a tensile strength of 63,800 PSI. Its smooth, oiled surface and superior dimensional tolerance make it ideal for automotive panels, appliance casings, and enclosures where a paint-ready finish is critical. In stock for same-day pickup in Los Angeles. Learn More

20 Gauge Cold Rolled Steel Sheet, 4' x 10' size. Grade 1018, conforming to ASTM A1008. Features a smooth, clean surface finish and tight dimensional tolerances. With 63,800 PSI tensile strength, it offers excellent formability for bending and moderate drawing. This thin gauge is ideal for automotive panels, appliance casings, and electronic enclosures. In stock for immediate pickup in Los Angeles. Learn More

22 Gauge (0.0299") Cold Rolled Steel Sheet, measuring 48" x 120". Typically produced from 1018 steel, this sheet offers a smooth, scale-free surface, superior dimensional tolerance, and excellent formability. Its thin gauge is perfect for automotive panels, appliance casings, electronic enclosures, and other applications requiring a paint-ready finish. In stock for same-day Los Angeles pickup. Learn More

11 Gauge (0.120") x 48" x 120" Galvanized Steel Sheet. This product conforms to ASTM A653 standards, providing excellent corrosion resistance through a protective hot-dip zinc coating. It combines the strength and formability of steel with superior durability for outdoor or high-moisture environments. Ideal for roofing, HVAC, automotive panels, and general fabrication. In stock for Los Angeles pickup. Learn More

3/4" x 3/4" 6061-T6 Aluminum Square Tube with a 0.125" wall, supplied in a 144" length. Conforming to ASTM B221, this tube offers an excellent strength-to-weight ratio with 45,000 PSI tensile strength. It features good machinability and excellent weldability, making it ideal for structural frames, furniture, railings, and custom fabrication projects. In stock for Los Angeles pickup. Learn More

18 Gauge (0.0478") 1018 Cold Rolled Steel Sheet, 48" wide by 120" long. This material offers a smooth, scale-free surface, superior dimensional tolerance, and excellent formability for bending and stamping. With good weldability and 63,800 PSI tensile strength, it is a versatile choice for applications requiring a precise, paint-ready surface, such as electronic enclosures and automotive panels. In stock for Los Angeles pickup. Learn More

26 Gauge Galvanized Corrugated Steel Sheet, measuring 36 inches in width by 144 inches in length. Produced via a continuous hot-dip process to ASTM A653 specifications with a G90 zinc coating for excellent rust prevention. This lightweight and formable sheet is ideal for roofing, siding, and agricultural buildings. In stock and available for same-day pickup in Los Angeles. Learn More

Our 2 Inch Square Plastic Cap is an industrial-grade finishing component made from durable, low-density polyethylene (LDPE). It provides a secure, press-fit closure for square tubing, protecting against moisture and debris while offering a clean, professional appearance. Learn More

2" OD x 0.125" wall 6061-T6 Aluminum Round Tube, 144" length. Conforms to ASTM B210. This versatile alloy provides 45,000 PSI tensile strength, excellent weldability, and superior corrosion resistance. Its high strength-to-weight ratio and medium diameter make it ideal for structural applications like equipment frames, handrails, roll cages, and machined components. In stock for immediate pickup in Los Angeles. Learn More

This 4" 6061-T6 Aluminum Channel offers an excellent strength-to-weight ratio for structural applications. Conforming to ASTM B308, it delivers 45,000 PSI tensile strength, superior corrosion resistance, and excellent weldability. Its larger profile is ideal for equipment bases, industrial supports, and heavy-duty framing. In stock for immediate Los Angeles pickup. Learn More

14 Gauge (48" x 120") 1018 Cold Rolled Steel Sheet, conforming to ASTM A1008. Features 63,800 PSI tensile strength, superior dimensional tolerance, and an exceptionally smooth surface finish ideal for painting or powder coating. Excellent formability makes it a top choice for automotive panels, appliance casings, metal enclosures, and precision stamped parts. In stock for same-day pickup in Los Angeles. Learn More

3" NPS Schedule 40 Galvanized Steel Pipe, sold in 21 ft lengths. Conforms to ASTM A53 Grade B with a 60,000 PSI tensile strength. The hot-dip zinc coating provides excellent corrosion resistance for outdoor and high-moisture environments. This large diameter pipe is ideal for main water lines, industrial process piping, structural columns, and protective barriers. In stock for same-day Los Angeles pickup. Learn More

Galvanized PBR sheet, 26 Gauge x 36 inches x 168 inches. Conforms to ASTM A653. Features a protective zinc coating for excellent corrosion resistance. The PBR (Purlin-Bearing Rib) profile provides structural strength for roofing and siding. Lightweight and durable, it's ideal for agricultural, commercial, and residential buildings. In stock Los Angeles. Learn More

A36 Hot Rolled Steel Channel, designated C12 x 20.7, with a 12" depth and weighing 20.7 lbs/ft. Conforms to ASTM A36 standards. Delivers a minimum yield strength of 36,000 PSI and excellent weldability. This large structural channel is ideal for building frames, heavy equipment bases, trailer chassis, and industrial supports. In stock for same-day cutting and pickup in Los Angeles. Learn More

26 Gauge Galvanized Corrugated Steel Sheet, 36" wide by 96" long. The G90 zinc coating, applied per ASTM A653, delivers excellent corrosion resistance for outdoor use. Its corrugated profile adds rigidity to the lightweight panel, making it ideal for roofing, siding, fencing, and agricultural barriers where durable weather protection is required. In stock for immediate pickup in Los Angeles. Learn More

20 Gauge Galvanized Steel B-Deck sheet, measuring 36" x 144". Conforms to ASTM A653 with a zinc coating for excellent corrosion resistance. This structural panel provides a 36,000 PSI yield strength, making it ideal for roofing, flooring, and siding applications where a strong, lightweight, and weather-resistant material is required. In stock for immediate Los Angeles pickup. Learn More

24 Gauge Galvanized B-Deck sheet, measuring 36" x 72". Conforming to ASTM A653, this structural panel features a protective zinc coating for excellent corrosion resistance. The base steel offers a minimum yield strength of 36,000 PSI. Ideal for roofing, floor decking, and siding in commercial and residential construction. Lightweight yet strong, it provides a durable, low-maintenance solution. In stock for Los Angeles pickup. Learn More

26 Gauge Galvanized Corrugated Steel Sheet, measuring 36 inches in nominal width by 120 inches in length. Conforms to ASTM A653 specifications with a G90 zinc coating for excellent corrosion resistance. This lightweight, durable panel is ideal for roofing, siding, agricultural buildings, and decorative applications. Its corrugated profile adds rigidity. In stock for immediate pickup in Los Angeles. Learn More

This high-quality 0.9mm (0.035") MIG welding wire is designed for superior performance in industrial applications. Certified to meet AWS/ASME standards, this steel alloy wire provides a stable arc and minimal spatter for clean, strong welds. Ideal for fabrication, automotive repair, and MRO projects. Learn More

Our 6x6 Heavy Duty Weldable Butt Hinges are engineered for maximum strength in demanding applications. Forged from high-quality, low-carbon weldable steel, these hinges provide a robust pivot point for heavy gates and industrial doors. The plain steel finish is ready for welding and custom coating. Learn More

6061-T6 Aluminum Square Tube, 2" x 2" with a 0.125" wall, in 144" lengths. This extruded structural tube meets ASTM B221 standards and offers 45,000 PSI tensile strength. Combining a high strength-to-weight ratio with excellent weldability and corrosion resistance, it is ideal for machine frames, structural supports, railings, and custom fabrication projects. In stock for immediate Los Angeles pickup. Learn More

This 11-inch Face Clamp is a versatile tool for woodworking, welding, and general fabrication. Its large jaw capacity and 2-inch reach provide strong, flush clamping for pocket-hole joinery, butt joints, and assembly tasks. The durable steel construction ensures rigidity and long service life for professional and DIY projects. In stock for same-day pickup in Los Angeles. Learn More

3/4" OD x 0.125" wall 6061-T6 Aluminum Round Tube, 144" length. This versatile tubing conforms to ASTM B210, offering 45,000 PSI tensile strength, excellent weldability, and superior corrosion resistance. Its high strength-to-weight ratio and small diameter make it ideal for lightweight structural frames, furniture, custom automotive parts, and support braces. In stock for same-day Los Angeles pickup. Learn More

A36 Hot Rolled Steel Channel, size C3 x 4.1 (3" Height x 1.41" Flange). Conforms to ASTM A36 with a minimum yield strength of 36,000 PSI. This structural C-channel offers excellent weldability and good machinability, making it ideal for equipment frames, vehicle chassis, structural supports, and general fabrication projects. In stock Los Angeles. Learn More

4" x 7.25 lb/ft A36 Hot Rolled Steel Channel, available in 20 ft lengths. Conforms to ASTM A36, offering a minimum yield strength of 36,000 PSI and excellent weldability. Its robust profile is ideal for heavy structural applications, building frames, industrial supports, and heavy equipment bases. In stock and available for same-day pickup in Los Angeles. Learn More

A36 Hot Rolled Steel Channel, size C10 x 15.3 (10" depth, 15.3 lbs/ft). Standard 20-foot (240") length. Conforms to ASTM A36, providing 36,000 PSI minimum yield strength and excellent weldability. This large structural channel is ideal for equipment manufacturing, trailer frames, and building supports where robust load-bearing capacity is required. In stock for immediate Los Angeles pickup. Learn More

3" x 5.7 lbs/ft A36 Hot Rolled Standard I-Beam, conforming to ASTM A36. Features a 36,000 PSI minimum yield strength and excellent weldability for reliable fabrication. This medium-sized beam is ideal for building frames, machinery bases, trailer chassis, and other structural applications where predictable performance is critical. In stock for immediate Los Angeles pickup. Learn More

5" x 10 lbs/ft Hot Rolled Steel Standard I-Beam, 20 ft length. Conforms to ASTM A36, providing a minimum yield strength of 36,000 PSI and excellent weldability for easy fabrication. Its dimensions (5" Height x 3" Flange) make it a robust choice for structural framing, machinery bases, and support girders. In stock for same-day Los Angeles pickup. Learn More

A36 Hot Rolled Standard I-Beam, 10" height by 25.4 lbs/ft. Conforms to ASTM A36 with a minimum yield strength of 36,000 PSI. This large structural S-beam offers excellent weldability and strength for building frames, bridge supports, and heavy machinery bases. Its efficient I-shape provides superior resistance to bending and shear forces. In stock for same-day cutting and pickup in Los Angeles. Learn More

Size 10, 16-inch heavy-duty rubber rain boots. Designed for maximum protection in wet and muddy environments, these boots feature 100% waterproof construction and a rugged, slip-resistant outsole for secure footing on slippery surfaces. The durable yet flexible rubber material ensures all-day comfort for construction, landscaping, and general industrial use. In stock for immediate pickup at our Los Angeles location. Learn More

A versatile, industrial-grade lacquer thinner for reducing paint viscosity and cleaning metal surfaces. This fast-evaporating solvent ensures optimal paint flow and prepares substrates for DTM coatings. Ideal for use with alkyd and oil-based industrial paints. Learn More

5" NPS Schedule 40, 304 Stainless Steel Pipe, sold in 20-foot (240") lengths. Conforms to ASTM A312, offering excellent corrosion resistance and weldability with a tensile strength of 73,200 PSI. The large 5" nominal pipe size makes it ideal for main water lines, industrial process piping, and structural columns in corrosive environments. In stock for immediate pickup in Los Angeles. Learn More

Protects steel surfaces with a high-purity, zinc-rich coating. This cold galvanized primer provides sacrificial, long-lasting corrosion resistance comparable to hot-dip galvanizing. The fast-drying formula is ideal for repairing damaged galvanized surfaces, protecting welds, and as a durable base coat for painting. In stock for immediate pickup in Los Angeles. Learn More

Industrial Coating 227 is a professional-grade, direct-to-metal (DTM) alkyd paint designed for maximum adhesion and durability. This corrosion-resistant coating meets MIL-SPEC performance criteria and is ideal for protecting steel and iron surfaces in demanding industrial environments. Learn More

This industrial-grade Gloss White paint features advanced Direct-to-Metal (DTM) technology for superior single-coat application. Formulated as a durable alkyd coating, it provides excellent corrosion and weather resistance for demanding MRO and fabrication projects. Learn More

Our Pacific Brown industrial-grade paint features advanced Direct-to-Metal (DTM) technology for superior corrosion protection. This durable alkyd coating is engineered for single-coat application on prepared metal surfaces, ideal for demanding MRO and fabrication projects. Learn More

Our Industrial Grade Oil-Based White Primer is a high-solids, alkyd-based coating designed for superior adhesion and corrosion protection on metal surfaces. This direct-to-metal (DTM) primer provides a durable foundation for topcoats in demanding MRO and fabrication applications. Learn More

The C-Scroll (5112A) is a classic decorative element forged from high-quality Class 25-30 gray iron. This architectural-grade component is designed to add an elegant, traditional finish to custom fences, gates, and railings in fabrication projects. Learn More

Engineered for strength and durability, these 5x5 Heavy Duty Weldable Butt Hinges are essential for industrial gates, doors, and custom fabrication. Made from high-quality, weldable low-carbon steel, they provide a secure and permanent pivot point. Ideal for heavy-duty applications requiring robust performance. Learn More

This 2" Square Pressed Steel Cap provides a clean, protective finish for square tubing and fence posts. Fabricated from durable, weldable mild steel, it prevents water ingress and adds a professional aesthetic to any ornamental ironwork project. Learn More

Our industrial-grade, oil-based white primer is an alkyd formulation designed for superior adhesion on metal surfaces. It provides an excellent foundation for topcoats, ensuring long-lasting corrosion protection for fabrication and MRO projects. Ideal for direct-to-metal (DTM) surface preparation. Learn More

This industrial-grade construction adhesive provides a high-strength bond for a wide range of materials. Compliant with ASTM C557 standards, it is engineered for reliability in demanding construction, fabrication, and MRO applications. Learn More

This industrial-grade construction adhesive meets ASTM C557 standards, ensuring a high-strength, reliable bond for professional use. Its versatile formulation is engineered for demanding fabrication, construction, and MRO applications on various substrates. Learn More

Our industrial-grade Gray DTM (Direct-to-Metal) Paint is a high-performance alkyd coating designed for superior corrosion resistance. This single-coat system, formulated to meet rigorous industrial performance criteria, acts as both a primer and topcoat, ideal for protecting steel and iron surfaces. Learn More

Pacific Brown DTM is a high-performance, oil-based (alkyd) industrial coating designed for direct application to metal. It provides excellent corrosion resistance and a durable finish, making it ideal for demanding MRO and fabrication projects. Learn More

NEW TOYOTA GRAY is a high-performance, oil-based industrial coating featuring Direct-to-Metal (DTM) technology. This industrial-grade alkyd enamel provides excellent corrosion resistance and a durable, protective finish for demanding applications on steel, iron, and equipment surfaces. Learn More

Engineered for durability, these 4x4 Heavy Duty Weldable Butt Hinges are fabricated from high-grade, weldable carbon steel. Their robust construction provides a reliable pivot point for heavy gates, doors, and industrial enclosures. Supplied unfinished for easy welding and custom finishing. Learn More

Industrial Coating 218 is a high-performance alkyd and epoxy formulation designed for direct-to-metal (DTM) applications. This corrosion-resistant coating provides a durable finish for industrial MRO and fabrication projects, meeting key performance benchmarks. Learn More

High-strength construction adhesive compliant with ASTM C557 standards. This industrial-grade formula provides a durable, reliable bond for a wide range of materials in fabrication and MRO projects. Learn More

This 5-inch tube ring is crafted from high-quality Class 25-30 gray cast iron, providing excellent durability for ornamental and architectural applications. Designed for seamless integration with standard tubing for fences, gates, and handrails. Learn More

This 2 Inch Post Ball Cap provides a durable, decorative finish for square or round tubing. Fabricated from Class 25-30 gray cast iron, it is designed for welding onto fences, gates, and handrails, offering a classic architectural look. Learn More

This 5/16” x 2” Hex Lag Screw is a heavy-duty fastener for wood applications. Made from low carbon steel and zinc-plated for corrosion resistance, it meets ASTM A307 specifications for strength and reliability. The hex head allows for high-torque installation. Learn More

This 5/16” x 3” Hex Lag Screw is a heavy-duty fastener manufactured from low carbon steel to meet ASTM A307 specifications. The zinc plating provides essential corrosion resistance, making it ideal for structural wood-to-wood and wood-to-masonry applications. Learn More

This industrial-grade, direct-to-metal (DTM) semi-gloss black paint is an alkyd-based enamel designed for superior corrosion protection. It provides a durable, weather-resistant finish on metal surfaces without requiring a separate primer, making it ideal for MRO and fabrication projects. Learn More

Our industrial-grade DTM Clear Coat is a high-performance alkyd coating designed for direct application on metal surfaces. It provides exceptional corrosion resistance and a durable, transparent finish ideal for MRO and fabrication projects. Learn More

This industrial-grade Safety Yellow DTM (Direct-to-Metal) paint provides exceptional corrosion protection in a single coat. Formulated as a high-performance alkyd coating, it's engineered for durability on steel and other metal surfaces. Ideal for MRO and new fabrication projects. Learn More

Hanover Green DTM is an industrial-grade, direct-to-metal coating engineered for superior corrosion protection. Its durable alkyd formulation provides a long-lasting, semi-gloss finish on steel surfaces, ideal for professional fabrication and MRO. Learn More

Metalize Industrial Primer is a high-performance alkyd coating engineered for superior corrosion resistance on metal surfaces. Formulated to meet rigorous MIL-SPEC performance criteria, it provides an excellent foundation for DTM (Direct-to-Metal) applications. Ideal for demanding industrial, MRO, and fabrication projects. Learn More

Our Gloss White DTM Oil-Based Paint is an industrial-grade alkyd coating designed for superior corrosion protection. This direct-to-metal formula ensures a durable, high-gloss finish on steel and other metal surfaces, ideal for demanding fabrication and MRO applications. Learn More

This Safety Yellow industrial coating features advanced Direct-to-Metal (DTM) oil-based alkyd technology for superior adhesion and corrosion protection. It provides a durable, high-visibility finish ideal for MRO and equipment applications, meeting industrial performance benchmarks. Learn More

This industrial-grade, oil-based DTM (Direct-to-Metal) paint offers a durable flat black finish. Engineered for superior adhesion and corrosion resistance consistent with MIL-SPEC performance criteria, it is ideal for protecting steel and iron surfaces in fabrication and MRO projects. Learn More

5/16" Cold Rolled 1018 Hexagon Bar, 144" length. Meets ASTM A108 specifications. This low-carbon steel bar offers 63,800 PSI tensile strength, a smooth surface finish, and tight dimensional tolerances from the cold drawing process. Its excellent machinability and good weldability make it suitable for producing fasteners, shafts, hydraulic fittings, and other precision machined components. In stock for same-day Los Angeles pickup. Learn More

5/16 inch diameter 1018 Cold Rolled Round Bar, sold in 144-inch lengths. Conforms to ASTM A108 specifications, offering 63,800 PSI tensile strength, tight dimensional tolerances, and excellent machinability. Its smooth, scale-free surface is ideal for precision parts like pins, dowels, small shafts, and fastener blanks. In stock for same-day Los Angeles pickup. Learn More

3/16" x 3/16" 1018 Cold Rolled Square Bar, 144" length. Conforming to ASTM A108, this material offers a clean surface finish, tight dimensional tolerances, and excellent machinability (70% vs 1212). With 63,800 PSI tensile strength, its small profile is ideal for keys, dowels, and precision machined components. Ready for fabrication and in stock for Los Angeles pickup. Learn More

3/4" x 3/4" 6061-T6 Aluminum Square Bar, sold in 144" lengths. This versatile structural alloy conforms to ASTM B211 and features 45,000 PSI tensile strength, good machinability, and excellent weldability. The medium size is ideal for support brackets, jigs, fixtures, and machined components requiring a high strength-to-weight ratio. In stock Los Angeles. Learn More

3/4 inch diameter Cold Rolled All Thread Rod in a 120-inch length with a zinc-plated finish for corrosion resistance. Manufactured from low-carbon steel, its strength conforms to ASTM A307 Grade A with a typical tensile strength of 63,800 PSI. This versatile, continuously threaded rod is ideal for general-purpose fastening, bracing, and anchoring applications in construction and industrial settings. In stock Los Angeles. Learn More

7/16 inch diameter 1018 Cold Rolled Round Bar in 144-inch lengths. Produced to ASTM A108 standards, this bar offers 53,700 PSI yield strength, excellent machinability, and a smooth, scale-free surface. Its tight dimensional tolerances make it ideal for high-precision applications. This small diameter is perfect for manufacturing dowel pins, small shafts, and fastener blanks. In stock for immediate Los Angeles pickup. Learn More

A durable 3 lb rubber mallet featuring a 3-inch non-marring face and a 14-inch overall length. The solid rubber head delivers firm, controlled blows without damaging metal surfaces, wood, or delicate components. Its balanced hardwood handle provides a comfortable grip for precise work in fabrication, woodworking, and general assembly. In stock Los Angeles. Learn More

Our 3-Inch Rubber Roller is an industrial-grade component designed for material handling and fabrication. Features a durable, high-traction rubber surface on a steel core, engineered for consistent performance in MRO and production environments. Learn More

Our 6-inch rubber roller is an industrial-grade component designed for durability and smooth operation. Constructed from high-traction rubber on a robust core, it is ideal for material handling systems and heavy-duty MRO applications. Learn More