Search results for: 'sizes wheel gate'

This industrial-grade construction adhesive is engineered for high-strength bonding on a variety of substrates. Compliant with ASTM C557 standards, it provides a durable, reliable bond for MRO, fabrication, and construction projects. Ideal for securing panels, framing, and other materials where a permanent hold is critical. Learn More

High-strength construction adhesive compliant with ASTM C557 standards. This industrial-grade formula provides a durable, reliable bond for a wide range of materials in fabrication and MRO projects. Learn More

Our L-Clip Welding Tab is an essential component for professional fabrication. Made from high-quality, weldable low-carbon steel, this 1-1/2 x 1-1/2 tab ensures clean weld starts and strong temporary connections, designed for use in processes compliant with AWS/ASME standards. Learn More

1/2" NPS Schedule 40 Galvanized Steel Pipe in 21-foot lengths. Conforms to ASTM A53 Grade B with a 60,000 PSI tensile strength. The hot-dip zinc coating provides superior corrosion resistance for outdoor and high-moisture environments. This small diameter is ideal for plumbing, non-potable water lines, conduit, and residential handrails. In stock for same-day Los Angeles pickup. Learn More

#3 (3/8") Grade 60 Hot Rolled Rebar, 20-foot length. Meets ASTM A615 specifications and features a minimum yield strength of 60,000 PSI and a deformed surface for superior mechanical bond with concrete. This standard reinforcing bar is essential for adding tensile strength to foundations, slabs-on-grade, and retaining walls. In stock for same-day Los Angeles pickup. Learn More

3/4" diameter (#6) Grade 60 Hot Rolled Rebar, available in 20-foot (240") lengths. This reinforcing bar meets ASTM A615 standards and provides a minimum yield strength of 60,000 PSI. Its deformed surface ensures a strong mechanical bond with concrete, making it essential for foundations, slabs, and structural columns. In stock Los Angeles. Learn More

This 1/4" x 4-1/4" Cobalt Industrial Drill Bit is engineered from M35 steel with 5% cobalt for superior heat resistance. Conforming to ANSI/ASME B94.11M standards, its 135° split-point tip ensures precise starts and is ideal for drilling into stainless steel and cast iron. Learn More

Durable 16 gauge galvanized steel slotted angle for versatile framing and support applications. Features a G90 galvanized coating for superior corrosion resistance. Ideal for industrial shelving, equipment bracing, and general MRO fabrication projects. Learn More

Galvanized Slotted Angle manufactured from durable 16 gauge steel for reliable performance in light to medium-duty applications. This 1-1/4" x 1-1/4" angle features a hot-dip galvanized finish conforming to ASTM A653 for superior corrosion resistance, ideal for custom framing, shelving, and MRO projects. Learn More

Our Galvanized Slotted Angle is a versatile steel framing component for general construction and MRO projects. Made from 16 gauge galvanized steel for superior corrosion resistance, this 1-1/2" x 1-1/2" angle provides reliable support for shelving, bracing, and custom frameworks that meet industrial manufacturing standards. Learn More

Constructed from durable steel, this 16-gauge slotted angle features a corrosion-resistant galvanized finish meeting ASTM A653 standards. The 1-1/2" x 1-1/2" profile is pre-punched for versatile, bolt-together assembly of custom racks, frames, and supports in MRO and fabrication applications. Learn More

Our Galvanized Slotted Angle is a versatile steel framing component ideal for custom shelving, racks, and bracing. Manufactured from durable steel with a corrosion-resistant galvanized finish, this 16 gauge angle provides reliable performance for MRO and fabrication projects. The pre-punched slots allow for easy, bolt-together assembly. Learn More

Galvanized Slotted Angle (2-1/4" x 1-1/2" x 16GA) crafted from low carbon steel with an ASTM A653 compliant galvanized coating for superior corrosion resistance. Ideal for constructing custom frames, racks, and supports in industrial and commercial applications. Learn More

The Super Tool Press Pliers 10" are engineered from high-strength forged alloy steel for superior gripping power and durability. Designed to meet ASME B107 standards, these industrial-grade pliers are essential for demanding fabrication and MRO tasks. Learn More

6061-T6 Aluminum Rectangular Tube with 2" x 1" outer dimensions, a 0.120" wall thickness, and 144" length. This versatile extruded profile conforms to ASTM B221 standards. It combines 45,000 PSI tensile strength with excellent weldability and corrosion resistance. Ideal for structural frames, machine guards, marine applications, and architectural projects. In stock for same-day Los Angeles pickup. Learn More

1" x 1" x 3/16" 6063-T5 Aluminum Angle, 144" length. Conforms to ASTM B308. Known as architectural aluminum, it offers 27,000 PSI tensile strength, excellent corrosion resistance, and a superior surface finish for anodizing. This small profile is ideal for light framing, decorative trim, window frames, and fixture components. In stock for same-day Los Angeles pickup. Learn More

4" NPS Schedule 40 Galvanized Steel Pipe, sold in 21-foot lengths. Conforming to ASTM A53 Grade B, this pipe has a 60,000 PSI tensile strength and a hot-dip zinc coating for superior corrosion resistance. Its large diameter is ideal for main water lines, industrial process piping, and structural columns. In stock for same-day Los Angeles pickup. Learn More

#4 (1/2") Grade 60 Hot Rolled Rebar, 20-foot length. Conforms to ASTM A615 with a minimum yield strength of 60,000 PSI. The deformed surface provides a superior mechanical bond with concrete, making it essential for reinforcing foundations, slabs, and columns. This medium-diameter bar offers a standard balance of strength and ductility for structural applications. In stock for Los Angeles pickup. Learn More

1" x 1" A500B Hot Rolled Steel Square Tube with a 0.09" wall thickness, in 240" lengths. This structural tubing conforms to ASTM A500 Grade B and provides 58,000 PSI tensile strength. Its excellent weldability and high strength-to-weight ratio make it ideal for building frames, trailer manufacturing, and general fabrication. In stock for same-day Los Angeles pickup. Learn More

A heavy-duty 1-1/2" x 3" Large L-Clip Bracket fabricated from A36 structural steel. This versatile hardware component is designed for strong right-angle connections in construction, framing, and industrial applications. It features a 3/8" pre-drilled hole for fast, secure installation and offers excellent weldability. Conforms to ASTM A36 specifications. In stock for Los Angeles pickup. Learn More

3/4" x 3/4" x 1/8" 6063 Aluminum Angle, 144" length. Known as "architectural aluminum," this grade conforms to ASTM B308 and offers excellent corrosion resistance and a superior surface finish. With 27,000 PSI tensile strength, it's ideal for non-structural applications like window frames, door frames, and decorative trim. In stock for Los Angeles pickup. Learn More

A 1" x 1" x 1/16" 6063 Aluminum Angle, sold in 144" lengths. This architectural-grade aluminum meets ASTM B308 standards and offers 27,000 PSI tensile strength. Known for its excellent corrosion resistance, weldability, and smooth surface finish, it is ideal for light structural applications, fabrication, and trim work. In stock Los Angeles. Learn More

3/4" x 1/2" x 1/8" 6063-T5 Aluminum Channel, 144" length. Conforms to ASTM B308 and features 27,000 PSI tensile strength, excellent corrosion resistance, and a superior surface finish. Known as the architectural alloy, it's ideal for window frames and decorative trim. This small profile is perfect for intricate finish work and light framing. In stock for Los Angeles pickup. Learn More

3/4" x 3/4" x 1/8" 6063-T5 Aluminum Channel, conforming to ASTM B308. This architectural alloy offers 27,000 PSI tensile strength, excellent corrosion resistance, and a superior surface finish ideal for anodizing. Its small profile is perfect for applications like window frames, decorative trim, railing components, and lightweight structural supports. In stock for Los Angeles pickup. Learn More

5/8" x 5/8" 1018 Cold Rolled Square Bar in 144" lengths. Produced to ASTM A108 standards, this bar offers a tensile strength of 63,800 PSI, excellent machinability, and a superior surface finish. Its tight dimensional tolerances make it ideal for shafts, fixtures, and precision machined components requiring minimal prep work. In stock for same-day Los Angeles pickup. Learn More

A36 Hot Rolled Steel Angle measuring 3" x 2" legs with 1/4" thickness, in a 240" (20 ft) length. This structural angle conforms to ASTM A36 specifications and offers a minimum yield strength of 36,000 PSI. Its excellent weldability and strength make it ideal for structural framing, equipment bases, and general fabrication projects. In stock for same-day Los Angeles pickup. Learn More

Grade 60 #5 (5/8" diameter) Hot Rolled Rebar, supplied in a 20-foot length. This steel bar meets ASTM A615 specifications with a minimum yield strength of 60,000 PSI and a tensile strength of 90,000 PSI. Its deformed surface creates a strong mechanical bond with concrete, making it the industry standard for reinforcing foundations, slabs, and retaining walls. In stock for Los Angeles pickup. Learn More

5" x 2" Hot Rolled Steel Rectangular Tube with a 0.120" wall, 240" length. This structural tube conforms to ASTM A500 Grade B, providing 58,000 PSI tensile strength and excellent weldability. The large rectangular profile offers superior resistance to bending and torsion, making it ideal for trailer frames, building supports, and heavy equipment bases. In stock for immediate Los Angeles pickup. Learn More

This industrial-grade 0.9mm (.035) MIG welding wire is engineered for high-performance fabrication and repair. Certified to meet AWS/ASME standards, it provides a stable arc and minimal spatter for clean, strong welds on various steel types. Available in an 11 LBS (1KG) spool. Learn More

This 1/2 Inch Square Plastic Cap is made from durable, weather-resistant Low-Density Polyethylene (LDPE). It provides a secure, friction-fit for finishing square tubing, protecting against sharp edges and internal contamination in fabrication and MRO applications. Learn More

This 5/16" x 3" one-way screw is engineered for permanent, tamper-resistant applications. Manufactured from industrial-grade steel with a protective black finish, its unique drive system prevents removal once installed. Conforms to common ANSI/ASME dimensional standards. Learn More

Our 1/2 inch Cobalt Drill Bit is engineered from M35 steel with 5% cobalt for superior heat resistance up to 1100°F. Featuring a 135° split-point geometry compliant with ANSI standards, this bit is designed for high-performance drilling in hard materials like stainless steel and cast iron. Learn More

This 5/8" x 5" Heavy-Duty Wedge Anchor is engineered for reliable fastening in solid concrete. Manufactured from high-strength carbon steel and finished with a CR3+ zinc plating for enhanced corrosion resistance, it provides superior holding power for structural and MRO applications. Includes nut and washer for immediate installation. Learn More

1/2" NPS Schedule 40 Stainless Steel Pipe, 240" length. This 304 stainless steel pipe conforms to ASTM A312 and has a tensile strength of 73,200 PSI. It combines excellent corrosion resistance and weldability, making it a standard for fluid and gas transport. The small diameter is ideal for instrumentation lines, conduit, and small-scale process piping. In stock for Los Angeles pickup. Learn More

This 11-inch Face Clamp is a versatile tool for woodworking, welding, and general fabrication. Its large jaw capacity and 2-inch reach provide strong, flush clamping for pocket-hole joinery, butt joints, and assembly tasks. The durable steel construction ensures rigidity and long service life for professional and DIY projects. In stock for same-day pickup in Los Angeles. Learn More

A 4" wide by 1/2" thick 304 Stainless Steel Flat Bar, supplied in 144" lengths. This versatile austenitic grade conforms to ASTM A276 and delivers 73,200 PSI tensile strength with excellent corrosion resistance and weldability. Its substantial cross-section is ideal for structural supports, base plates, heavy brackets, and industrial equipment frames. In stock for Los Angeles pickup. Learn More

3/4" NPS Schedule 40 pipe in 304 stainless steel. This pipe conforms to ASTM A312 and provides excellent corrosion resistance and weldability for demanding applications. With a tensile strength of 73,200 PSI, it is a reliable choice for fluid and gas transport in food processing, chemical plants, and water treatment systems. Ideal for instrumentation lines and small-scale process piping. In stock Los Angeles. Learn More

1-1/4" x 1-1/4" 304 Stainless Steel Square Tube with a 0.065" wall and a 180-grit satin finish. Conforming to ASTM A269, it offers 73,200 PSI tensile strength, excellent corrosion resistance, and superior weldability. Its combination of structural integrity and polished appearance makes it ideal for architectural handrails, support frames, and decorative applications. In stock for Los Angeles pickup. Learn More

3/4" NPS 6063-T5 Aluminum Pipe with a Schedule 40 wall, in 240" lengths. Conforms to ASTM B241 with 27,000 PSI tensile strength. Known as architectural aluminum, this grade offers a superior surface finish, excellent corrosion resistance, and great weldability. Ideal for handrails, display frames, and low-pressure fluid transfer. In stock Los Angeles. Learn More

2-1/2" nominal Schedule 40 Galvanized Steel Pipe, 21-foot length. Conforms to ASTM A53 Grade B, with 60,000 PSI tensile strength for structural integrity. The hot-dip zinc coating provides excellent corrosion and rust resistance. Large diameter is ideal for main water lines, industrial piping, and structural columns. In stock for immediate Los Angeles pickup. Learn More

3-1/2 inch NPS Schedule 40 Galvanized Steel Pipe. Conforming to ASTM A53 Grade B, this pipe features a hot-dip zinc coating for superior corrosion resistance and 60,000 PSI tensile strength. Its durable, weather-resistant finish makes it ideal for outdoor structures, water lines, and safety barriers. Large diameter suitable for main water lines and structural columns. In stock for Los Angeles pickup. Learn More

This 0.9mm (.035") flux core welding wire is engineered for high-performance welding without shielding gas. Meeting AWS A5.20 specifications, this self-shielded wire provides a stable arc and smooth bead appearance for general fabrication. Ideal for welding on mild and carbon steels. Learn More

This 1 Inch Square Plastic Cap provides a durable, finished look for square tubing. Made from UV-resistant LDPE plastic, it protects against moisture and debris. Ideal for fencing, furniture, and fabrication projects. Learn More

Galvanized Slotted Angle is a versatile framing material made from durable 16 gauge steel. Featuring a corrosion-resistant galvanized finish meeting ASTM A653 standards, it's ideal for constructing custom racks, supports, and maintenance frames. The pre-punched slotted pattern allows for easy, bolt-together assembly. Learn More

Versatile 16-gauge galvanized slotted angle for industrial framing and support. This pre-punched steel angle (2-1/4" x 1-1/2" x 48") conforms to ASTM standards for strength and provides excellent corrosion resistance for MRO and custom fabrication projects. Learn More

Versatile 16-gauge steel slotted angle for framing and support, featuring a hot-dip galvanized finish for superior corrosion resistance. This product, measuring 2-1/4" x 1-1/2" x 120", provides a durable, bolt-together solution for industrial shelving, racks, and MRO projects. Learn More

This Galvanized Slotted Angle measures 2-1/4" x 1-1/2" x 16GA in a 144" length. Manufactured from steel meeting ASTM A653 standards with a G90 galvanized coating, it offers superior corrosion resistance for custom framing, shelving, and MRO support structures. Learn More

The Bobco Auto-Darkening Welding Helmet offers superior protection, meeting ANSI/ISEA Z87.1+ safety standards. Featuring a 3.67” x 1.70” viewing area and a lightweight 1.07lb polycarbonate body, it ensures comfort and clarity for professional fabrication and MRO tasks. Learn More

Our 12-inch rubber roller is an industrial-grade component designed for high-load capacity material handling. Featuring a durable, non-marring rubber surface bonded to a steel core, it provides smooth movement for conveyor systems and industrial carts. Engineered to meet demanding MRO and fabrication requirements. Learn More

This industrial-grade Galvanized Corner Guard is manufactured from 16 gauge steel for high-impact wall and corner protection. It features a G90 hot-dip galvanized coating compliant with ASTM A653 for excellent corrosion resistance in commercial and MRO applications. Learn More

A 16 gauge galvanized steel corner guard providing robust impact and abrasion resistance for walls and edges. Manufactured to meet ASTM A653 standards for corrosion protection, this 2-1/2" x 2-1/2" x 36" guard is ideal for high-traffic commercial and industrial environments. The G90 galvanized finish ensures long-lasting durability. Learn More

Protect high-traffic areas with our Galvanized Corner Guard. Made from durable 16 gauge steel with a G90 galvanized coating for superior corrosion resistance, conforming to ASTM A653 standards. Ideal for industrial, commercial, and MRO applications requiring robust wall and corner protection. Learn More

The 14 x ¾” Hex Washer Self-Drill Screw is a high-performance fastener for metal-to-metal applications. Compliant with SAE J78 standards, it features a zinc plating (ASTM B633) for corrosion resistance and an integrated neoprene washer for a weatherproof seal. Learn More

The 14 x 2” Hex Washer Self-Drill Screw is a high-performance fastener engineered to SAE J78 standards. It features a hardened steel point for drilling into metal without a pilot hole and a bonded neoprene washer for a weather-tight seal. The zinc plating, compliant with ASTM B633, provides excellent corrosion resistance for exterior applications. Learn More

This 5/16" x 4" Hex Lag Screw is manufactured from durable low carbon steel to meet ASTM A307 performance standards. It features a corrosion-resistant zinc plating (per ASTM B633), making it ideal for construction and general framing applications. Learn More

This 5/16" x 2" one-way screw is a tamper-resistant fastener made from industrial-grade low carbon steel with a protective black finish. Designed for security applications based on ASTM A307 material standards where removal prevention is critical. Learn More

The ½” x 3” Power Bull Anchor is a heavy-duty, high-strength steel fastener designed for secure anchoring in concrete and masonry. This industrial-grade anchor includes a nut and washer and features a zinc-plated finish per ASTM B633 for enhanced corrosion resistance. Learn More

This 3/16" x 4-1/4" industrial cobalt drill bit is engineered from M35 steel (5% cobalt) for superior heat resistance. Its 135° split-point tip ensures precise, no-walk starts on hard materials like stainless steel and cast iron. Manufactured to meet industrial performance standards for durability and accuracy. Learn More

Industrial Hardware Consumable 218 is a high-performance solution for MRO and fabrication. Formulated to meet key industrial performance standards like ASTM C557, this product ensures durability for demanding applications on metal surfaces. Ideal for corrosion protection and general maintenance tasks. Learn More

The C199L is a decorative handrail fitting for 1-1/4" cap rails. Manufactured from durable Class 25-30 gray iron, this component provides a secure and aesthetic termination for architectural and ADA-compliant railing systems. Learn More

3/4" x 3/4" x 1/8" 304 Stainless Steel Angle. An austenitic grade conforming to ASTM A276, this angle provides excellent corrosion resistance and weldability with 73,200 PSI tensile strength. Its small profile is ideal for creating lightweight structural frames, mounting brackets, corner guards, and decorative architectural trim where both strength and a clean finish are required. In stock for immediate Los Angeles pickup. Learn More

3/8" x 3/8" 304 Stainless Steel Square Bar, 144" length. Conforms to ASTM A276, providing excellent corrosion resistance and weldability with 73,200 PSI tensile strength. This austenitic, non-magnetic grade is a versatile choice for general fabrication, ideal for creating brackets, braces, and supports for industrial and architectural applications. In stock for Los Angeles pickup. Learn More

1/2" x 1/2" 304 Stainless Steel Square Bar, 144" length. Conforms to ASTM A276, offering an excellent balance of strength, corrosion resistance, and weldability. With 73,200 PSI tensile strength, this versatile bar is ideal for structural supports, frames, shafts, and general fabrication. Its clean finish is suitable for architectural and food-grade applications. In stock for Los Angeles pickup. Learn More

0.188" x 48" x 120" 3003-H14 Aluminum Plate. Meets ASTM B209 specifications. This non-heat-treatable alloy offers excellent weldability, superior corrosion resistance, and good workability. With a tensile strength of 22,000 PSI, its medium thickness is ideal for structural panels, machine guards, chemical equipment, and general fabrication projects. In stock for same-day Los Angeles pickup. Learn More

1 Inch Schedule 40 Galvanized Steel Pipe, sold in 21-foot lengths. Conforms to ASTM A53 Grade B, providing 60,000 PSI tensile strength and superior corrosion resistance from its hot-dip zinc coating. This medium-diameter pipe is ideal for plumbing mains, structural posts, outdoor handrails, and fence framework. A reliable choice for applications requiring strength and weather protection. In stock for same-day Los Angeles pickup. Learn More

This 3/4" x 3/4" x 1/8" hot rolled steel angle is a versatile structural shape conforming to ASTM A36 specifications. It offers a minimum yield strength of 36,000 PSI and excellent weldability, making it easy to fabricate. The small profile is ideal for light structural framing, equipment guards, mounting brackets, and custom fabrication projects. In stock for Los Angeles pickup. Learn More

1" x 1" x 1/4" Hot Rolled Steel Angle in 20-foot lengths. A versatile structural shape conforming to ASTM A36 with a minimum yield strength of 36,000 PSI. This material offers excellent weldability and good machinability, making it easy to fabricate. Its small profile is ideal for light structural framing, equipment guards, mounting brackets, and general repair projects. In stock for Los Angeles pickup. Learn More

A36 Hot Rolled Steel Angle with 2-1/2" x 2-1/2" legs and 1/4" thickness. Conforming to ASTM A36, this structural angle provides a minimum yield strength of 36,000 PSI. Its excellent weldability and durability make it a primary choice for structural framing, equipment bases, bracing, and general fabrication projects. This medium profile offers robust support for various load-bearing applications. In stock for same-day Los Angeles pickup. Learn More

A36 Hot Rolled Steel Angle, measuring 2-1/2" x 2-1/2" legs with a 3/8" thickness. This structural angle conforms to ASTM A36 standards and provides a minimum yield strength of 36,000 PSI. Its excellent weldability and strength make it ideal for medium-duty structural framing, equipment bases, shelving, and general fabrication projects. In stock and available for same-day pickup in Los Angeles. Learn More

The Bobco Auto Darkening Weld Helmet provides superior protection, meeting ANSI/ISEA Z87.1+ standards for impact resistance. It features a large 3.94” x 3.15” viewing area for maximum visibility and is constructed from a lightweight, durable high-impact resistant material. Learn More

1" x 1" x 3/16" 304 Stainless Steel Angle in a 240-inch length. Conforming to ASTM A276, this material provides excellent corrosion resistance and weldability with a tensile strength of 73,200 PSI. Its small profile is ideal for light structural support, custom brackets, architectural trim, and equipment framing where both strength and a clean finish are required. In stock for immediate Los Angeles pickup. Learn More

1-1/4" x 1-1/4" x 1/8" 304 Stainless Steel Angle, sold in 20 ft (240") lengths. This versatile angle conforms to ASTM A276 and provides 73,200 PSI tensile strength, excellent corrosion resistance, and superior weldability. Its small profile is ideal for light structural framing, manufacturing equipment guards, support brackets, and architectural trim. In stock and available for same-day pickup in Los Angeles. Learn More

3/4" wide by 3/8" thick 304 Stainless Steel Flat Bar, 144" length. Conforming to ASTM A276, this austenitic stainless steel offers excellent corrosion resistance and weldability with 73,200 PSI tensile strength. Its versatile rectangular profile is ideal for small structural supports, food processing equipment framework, architectural trim, and general fabrication projects. In stock for same-day Los Angeles pickup. Learn More

3/4" x 3/4" 304 Stainless Steel Square Bar, 144" length. Conforms to ASTM A276 specifications. This austenitic grade combines 73,200 PSI tensile strength with excellent corrosion resistance and weldability. The medium 3/4" profile is ideal for structural supports, frames, shafts, and braces in food processing and architectural applications. In stock for Los Angeles pickup. Learn More

1/8" x 1/4" 1018 Cold Rolled Steel Flat Bar, 144" length. Conforms to ASTM A108 with 63,800 PSI tensile strength, good weldability, and a 70% machinability rating. The cold drawn process provides a smooth, scale-free finish and tight dimensional tolerances. Its small profile is ideal for brackets, shims, straps, and small frame stock. In stock for Los Angeles pickup. Learn More

A36 Hot Rolled Steel Angle, 4" x 4" x 3/8" in 20 ft (240") lengths. Conforms to ASTM A36, providing a minimum yield strength of 36,000 PSI with excellent weldability and fabrication characteristics. The large 4-inch legs are ideal for heavy structural applications, building frames, equipment bases, and industrial supports. In stock and available for same-day pickup in Los Angeles. Learn More

Hot Rolled Steel Rectangular Tube measuring 4" x 2" with a 0.188" wall thickness. Manufactured from A500 Grade B steel, this structural tubing meets ASTM A500 specifications and offers a minimum tensile strength of 58,000 PSI. Its high strength-to-weight ratio and excellent weldability make it ideal for building frames, trailer construction, and heavy-duty supports. In stock for immediate Los Angeles pickup. Learn More

4" x 3" x 0.250" wall Hot Rolled Steel Rectangular Tube. This structural grade tubing conforms to ASTM A500 Grade B, providing 58,000 PSI tensile strength and excellent weldability. The robust dimensions and strength-to-weight ratio make it ideal for building frames, trailer beds, heavy equipment supports, and other load-bearing applications. In stock for Los Angeles pickup. Learn More

5" x 2" Hot Rolled Steel Rectangular Tube with a 0.180" wall thickness, in 20-foot lengths. Manufactured to ASTM A500 Grade B specifications, this structural tubing provides a minimum yield strength of 46,000 PSI and excellent weldability. Its large profile offers superior strength and rigidity, making it ideal for trailer frames, heavy equipment bases, and structural supports. In stock for immediate Los Angeles pickup. Learn More

Hot Rolled Steel Rectangular Tube, 6" x 4" with a 0.188" wall thickness. Manufactured to ASTM A500 Grade B, this structural tubing offers a high strength-to-weight ratio with 58,000 PSI tensile strength and excellent weldability. The large profile provides superior resistance to bending and torsional stress, ideal for heavy structural frames, equipment bases, and trailer construction. In stock for Los Angeles pickup. Learn More

1-1/2" OD x 0.120" wall Hot Rolled Steel Round Tube, 240" length. Produced to meet ASTM A500 Grade B specifications, this structural tubing offers 58,000 PSI tensile strength and excellent weldability. Its medium diameter is ideal for fabrications requiring high strength-to-weight performance, including equipment frames, roll cages, handrails, and structural supports. In stock for Los Angeles pickup. Learn More

3" x 3" x 0.120" wall Hot Rolled Steel Square Tube, 20-foot length. A structural grade tube conforming to ASTM A500 Grade B, it has a minimum yield strength of 46,000 PSI and excellent weldability. The hot rolled finish has a dark mill scale. Ideal for constructing trailer frames, building supports, equipment bases, and general fabrication projects requiring strength and durability. In stock for Los Angeles pickup. Learn More

Durable Galvanized Slotted Angle for versatile framing and support applications. Fabricated from commercial-grade steel with a corrosion-resistant galvanized finish meeting ASTM A653 coating standards. The 1-1/2" x 1-1/2" x 16GA profile provides reliable integrity for MRO and construction projects. Learn More

4" x 1-1/2" Hot Rolled Steel Rectangular Tube with a 0.065" wall, manufactured to ASTM A500 Grade B specifications. This structural grade tubing offers a minimum 46,000 PSI yield strength and excellent weldability, making it ideal for fabrication. Its high strength-to-weight ratio is perfect for trailer frames, structural supports, and machine bases. In stock for immediate Los Angeles pickup. Learn More

1/2" x 1/2" 6061-T6 Aluminum Square Bar, 144" length. Conforms to ASTM B211. This structural alloy provides an excellent strength-to-weight ratio with 45,000 PSI tensile strength, good machinability, and superior corrosion resistance. Its sharp corners and dimensional accuracy make it ideal for fabricating structural frames, support brackets, and precision machined components. In stock for immediate Los Angeles pickup. Learn More

5/8" x 5/8" 6061-T6 Aluminum Square Bar, sold in 144" lengths. Conforms to ASTM B211, offering a high strength-to-weight ratio with 40,000 PSI yield strength. Known for excellent machinability, weldability, and corrosion resistance, it's ideal for structural frames, support brackets, and precision machined parts. In stock for immediate cutting and pickup in Los Angeles. Learn More

1" x 1" 6061-T6 Aluminum Square Bar, 144" length. Conforms to ASTM B211, offering a high strength-to-weight ratio with 45,000 PSI tensile strength. This versatile alloy provides excellent machinability, superior corrosion resistance, and great weldability. Ideal for structural frames, support brackets, jigs, and precision machined components. In stock for immediate Los Angeles pickup. Learn More

5/16" Cold Rolled 1018 Hexagon Bar, 144" length. Meets ASTM A108 specifications. This low-carbon steel bar offers 63,800 PSI tensile strength, a smooth surface finish, and tight dimensional tolerances from the cold drawing process. Its excellent machinability and good weldability make it suitable for producing fasteners, shafts, hydraulic fittings, and other precision machined components. In stock for same-day Los Angeles pickup. Learn More

1" x 1" 1018 Cold Rolled Steel Square Bar, 144" length. Conforms to ASTM A108 and offers 63,800 PSI tensile strength, a clean surface finish, and tight dimensional tolerances. Its excellent machinability (70% vs 1212) makes it ideal for shafts, dowels, fixtures, and precision machined components. In stock for same-day cutting and Los Angeles pickup. Learn More

3/16" thick A36 Hot Rolled Steel Plate, measuring 48" x 120". This structural plate conforms to ASTM A36 and provides a minimum yield strength of 36,000 PSI with excellent formability and weldability. Its medium thickness is ideal for gussets, structural base plates, and general fabrication projects where strength and economy are key. In stock for immediate Los Angeles pickup. Learn More

3" x 3" x 0.25" wall Hot Rolled Steel Square Tube, sold in 20-foot lengths. Made from A500 Grade B structural steel, it offers a minimum yield strength of 46,000 PSI and excellent weldability. Ideal for equipment frames, structural supports, handrails, and general fabrication projects requiring a high strength-to-weight ratio. In stock for immediate Los Angeles pickup. Learn More

Galvanized Slotted Angle (1-1/2" x 1-1/2" x 16GA) is a versatile framing material made from durable, corrosion-resistant galvanized steel meeting ASTM A653 standards. It is perfect for constructing custom shelving, racks, and supports for industrial MRO and fabrication projects. The pre-punched slotted pattern allows for simple, bolt-together assembly. Learn More

Industrial-grade Razor Wire Clips sold in convenient 25-packs. Made from heavy-duty galvanized steel for superior corrosion resistance and high tensile strength. Essential hardware for securing concertina and razor wire in high-security fence installations. Learn More

This 8 x ½ Pan Head Phillips Truss Screw is a versatile fastener made from low carbon steel. It features a zinc plating with CR3+ passivate compliant with ASTM B633 for reliable corrosion resistance. The wide truss head provides an excellent bearing surface for thin materials. Learn More

This 5/16” x 2” Hex Lag Screw is a heavy-duty fastener for wood applications. Made from low carbon steel and zinc-plated for corrosion resistance, it meets ASTM A307 specifications for strength and reliability. The hex head allows for high-torque installation. Learn More

This 1/4" x 2" Hex Lag Screw features a protective zinc plating per ASTM B633. Manufactured from low carbon steel, it meets ASTM A307 specifications, providing reliable holding power and a minimum tensile strength of 60,000 psi for wood construction applications. Learn More

This ½” x 4” Power Bull Anchor is a heavy-duty mechanical wedge anchor for fastening into concrete. Manufactured from high-strength carbon steel with a zinc plating compliant with ASTM B633 for corrosion resistance. Includes nut and washer for a complete installation. Learn More

The 1/2" x 5" Power Bull Anchor is a heavy-duty carbon steel fastener designed for anchoring into concrete. Featuring a zinc-plated finish per ASTM B633 for corrosion resistance, it provides reliable holding power for structural and MRO applications. Includes nut and washer for complete installation. Learn More

This industrial-grade 5/16" x 4-1/2" masonry drill bit is engineered for high-performance drilling in concrete, brick, and block. It features a durable tungsten carbide tip for extended life and precision, manufactured to meet ANSI B212.15 standards. Learn More

This high-performance 0.8mm (.030") MIG welding wire is engineered for superior results in fabrication and repair. AWS/ASME certified, it ensures strong, consistent welds on mild and carbon steels. Packaged in convenient 11 LBS (1KG) spools for project efficiency. Learn More