Search results for: 'pairs cast base render q specif metal'

This 1-¼” Single Hole Lockbox is fabricated from high-quality, weldable steel. Designed for security gate and fence applications, it provides a durable housing for standard lock mechanisms. Its single-hole configuration ensures straightforward installation and compatibility. Learn More

This 1-1/4" square pressed steel cap provides a clean, finished look for fence posts and railings. Made from durable, weldable mild steel, it protects post interiors from debris and weather. Ideal for ornamental and security fencing applications. Learn More

3-1/2" x 3-1/2" Hot Rolled Steel Square Tube with a 0.120" wall, supplied in a 240" length. Conforming to ASTM A500 Grade B, this structural tubing features 58,000 PSI tensile strength, excellent weldability, and a high strength-to-weight ratio. Ideal for heavy structural frames, industrial supports, and equipment bases where durability and load-bearing capacity are critical. In stock for Los Angeles pickup. Learn More

3-1/2" x 3-1/2" Hot Rolled Steel Square Tube with a 0.250" wall, supplied in 20-foot lengths. This structural tubing conforms to ASTM A500 Grade B, providing a minimum yield strength of 46,000 PSI and excellent weldability. Its large profile and robust wall thickness make it ideal for heavy-duty structural applications like building frames, supports, and industrial equipment bases. In stock for Los Angeles pickup. Learn More

4 Inch x 3/16 Inch A36 Hot Rolled Steel Flat Bar. This structural steel bar conforms to ASTM A36 and features a minimum yield strength of 36,000 PSI with excellent weldability. The large 4-inch width is ideal for heavy-duty applications including structural base plates, trailer frames, equipment mounting, and general fabrication projects requiring robust support. In stock and ready for same-day pickup in Los Angeles. Learn More

2" Nominal Pipe Size (NPS) Galvanized Steel Pipe, Schedule 40 wall, 21-foot length. Conforms to ASTM A53 Grade B with 60,000 PSI tensile strength. The hot-dip zinc coating provides excellent corrosion resistance for outdoor and high-moisture use. Ideal for plumbing mains, HVAC piping, handrails, and structural posts. In stock for same-day Los Angeles pickup. Learn More

The ½” x 3” Power Bull Anchor is a heavy-duty, high-strength steel fastener designed for secure anchoring in concrete and masonry. This industrial-grade anchor includes a nut and washer and features a zinc-plated finish per ASTM B633 for enhanced corrosion resistance. Learn More

A36 Hot Rolled Steel Angle measuring 1-1/2" x 1-1/2" with a 1/8" thickness, supplied in 20-foot lengths. This structural angle conforms to ASTM A36 standards and offers a minimum yield strength of 36,000 PSI with excellent weldability. Its medium size is ideal for structural framing, equipment bases, and general fabrication projects requiring robust support. In stock and ready for same-day pickup in Los Angeles. Learn More

3" x 3" x 0.120" wall Hot Rolled Steel Square Tube, 20-foot length. A structural grade tube conforming to ASTM A500 Grade B, it has a minimum yield strength of 46,000 PSI and excellent weldability. The hot rolled finish has a dark mill scale. Ideal for constructing trailer frames, building supports, equipment bases, and general fabrication projects requiring strength and durability. In stock for Los Angeles pickup. Learn More

Our 3-1/2x2-1/4 Weldable Butt Hinges are engineered from high-strength, low-carbon steel for maximum weld penetration and durability. These components are designed for heavy-duty applications where a permanent, strong pivot is required. Ideal for steel gates, doors, and MRO projects. Learn More

This 11-inch Face Clamp is a versatile tool for woodworking, welding, and general fabrication. Its large jaw capacity and 2-inch reach provide strong, flush clamping for pocket-hole joinery, butt joints, and assembly tasks. The durable steel construction ensures rigidity and long service life for professional and DIY projects. In stock for same-day pickup in Los Angeles. Learn More

16 Gauge (0.060") thick Galvanized Steel Sheet, 48" x 120". Conforms to ASTM A653 standards, featuring a protective zinc coating for excellent corrosion resistance in outdoor or high-moisture environments. This versatile thickness is ideal for HVAC ductwork, electrical enclosures, flashing, and light-duty fabrication. Combines the strength of steel with superior rust protection. In stock for Los Angeles pickup. Learn More

11 Gauge (0.120") x 48" x 120" Galvanized Steel Sheet. This product conforms to ASTM A653 standards, providing excellent corrosion resistance through a protective hot-dip zinc coating. It combines the strength and formability of steel with superior durability for outdoor or high-moisture environments. Ideal for roofing, HVAC, automotive panels, and general fabrication. In stock for Los Angeles pickup. Learn More

A36 Hot Rolled Steel Sheet, 12 Gauge thickness (0.1046") with standard 48" x 120" dimensions. Certified to ASTM A36, this sheet offers a minimum yield strength of 36,000 PSI, excellent weldability, and good formability. Its medium thickness is ideal for structural panels, machine guards, vehicle body panels, and general fabrication projects where a precise finish is not required. In stock for Los Angeles pickup. Learn More

This 4" 6061-T6 Aluminum Channel offers an excellent strength-to-weight ratio for structural applications. Conforming to ASTM B308, it delivers 45,000 PSI tensile strength, superior corrosion resistance, and excellent weldability. Its larger profile is ideal for equipment bases, industrial supports, and heavy-duty framing. In stock for immediate Los Angeles pickup. Learn More

3" x 1.41" 6061-T6 Aluminum Channel, 144" length. Conforms to ASTM B308, offering 45,000 PSI tensile strength, excellent weldability, and superior corrosion resistance. This versatile structural profile combines a high strength-to-weight ratio with good machinability. Ideal for structural framing, equipment supports, machine bases, and architectural applications. In stock for Los Angeles pickup. Learn More

This 1-1/2" x 1-1/2" x 36" corner guard is fabricated from 16 gauge galvanized steel for excellent durability and impact resistance. The G90 zinc coating provides superior corrosion protection, making it ideal for industrial and commercial environments. Perfect for protecting walls, columns, and equipment. Learn More

This 1/2 Inch Square Plastic Cap is made from durable, weather-resistant Low-Density Polyethylene (LDPE). It provides a secure, friction-fit for finishing square tubing, protecting against sharp edges and internal contamination in fabrication and MRO applications. Learn More

A36 Hot Rolled Steel Flat Bar, 1-1/4" wide by 1/8" thick. This structural steel bar conforms to ASTM A36 standards, offering a minimum yield strength of 36,000 PSI and excellent weldability. Its good overall mechanical properties make it ideal for general fabrication, structural bracing, supports, and repair work. In stock for same-day Los Angeles pickup. Learn More

26 Gauge Galvanized PBR Steel Sheet, measuring 36 inches wide by 120 inches long. Conforming to ASTM A653, this panel features a protective zinc coating for excellent corrosion resistance. With a base steel yield strength of 36,000 PSI, it's ideal for roofing, siding, and agricultural structures. Its lightweight profile simplifies installation. In stock for Los Angeles pickup. Learn More

2" x 2" Hot Rolled Steel Square Tube with a 0.065" wall thickness, sold in 240" (20 ft) lengths. This A500 Grade B structural tubing offers 58,000 PSI tensile strength and excellent weldability per ASTM A500. Its high strength-to-weight ratio makes it ideal for trailer frames, equipment bases, and general fabrication. In stock for Los Angeles pickup. Learn More

This 1-1/2" x 3/16" Cold Rolled Flat Bar is made from 1018 steel, conforming to ASTM A108 standards. It offers 63,800 PSI tensile strength, a smooth, scale-free surface, and tight dimensional tolerances. With good machinability and weldability, it's ideal for manufacturing brackets, base plates, and machine components. Available for same-day pickup in Los Angeles. Learn More

1" x 3/8" 1018 Cold Rolled Steel Flat Bar, 144" length. Conforms to ASTM A108 with 63,800 PSI tensile strength and excellent machinability. The cold drawing process provides a smooth, scale-free surface and tight dimensional tolerances. Ideal for base plates, mounting brackets, and machine components requiring precision without extensive finishing. In stock for Los Angeles pickup. Learn More

2" x 1" x 0.075" Hot Rolled Rectangular Steel Tube. This structural grade tubing conforms to ASTM A500 Grade B, offering a 58,000 PSI tensile strength and excellent weldability. Its rectangular profile provides superior resistance to bending and torsional stress, making it ideal for trailer frames, structural supports, and industrial machine bases. In stock for same-day Los Angeles pickup. Learn More

3" x 3" Hot Rolled Steel Square Tube with a 0.083" wall thickness, available in 240" lengths. This A500 Grade B structural tubing offers a minimum yield strength of 46,000 PSI and excellent weldability. Its high strength-to-weight ratio makes it ideal for structural frames, equipment bases, trailer manufacturing, and general fabrication projects. In stock for same-day pickup in Los Angeles. Learn More

The L-Clip Welding Tab is a critical fabrication component made from high-quality, weldable mild steel. Measuring 1-1/2" x 3-1/2", this tab is engineered for creating strong, precise fixturing points and conforms to general industry standards for material quality and weldability. Learn More

This large industrial slide bolt features a robust 3/4" diameter steel shaft and durable black finish. Engineered for reliable security on heavy-duty gates, doors, and enclosures. Ideal for fabrication and MRO applications. Learn More

This 8 x ½ Pan Head Phillips Truss Screw is a versatile fastener made from low carbon steel. It features a zinc plating with CR3+ passivate compliant with ASTM B633 for reliable corrosion resistance. The wide truss head provides an excellent bearing surface for thin materials. Learn More

Our 12-inch rubber roller is an industrial-grade component designed for high-load capacity material handling. Featuring a durable, non-marring rubber surface bonded to a steel core, it provides smooth movement for conveyor systems and industrial carts. Engineered to meet demanding MRO and fabrication requirements. Learn More

This Small Slide Bolt features a durable 1/2" diameter steel shaft for reliable latching. Manufactured from industrial-grade low-carbon steel similar to ASTM A307 material, it provides a simple and effective security solution for light-duty doors and gates. Its robust construction ensures long-lasting performance in MRO and fabrication applications. Learn More

Our industrial-grade Black Nitrile Disposable Gloves offer superior puncture and chemical resistance. These powder-free gloves are ANSI/ISEA 105 rated for reliable hand protection in demanding MRO, fabrication, and general-purpose applications. Packaged in a convenient 100-piece box. Learn More

This 1/2" x 3" Hex Lag Screw features a zinc-plated finish for moderate corrosion resistance. Manufactured from low carbon steel to meet ASTM A307 standards, it provides reliable holding power for wood construction and framing applications. Learn More

26 Gauge x 36" x 144" Galvanized PBR (Purlin Bearing Rib) sheet, compliant with ASTM A653. Features a protective zinc coating for excellent corrosion resistance and a minimum yield strength of 36,000 PSI. This lightweight, durable panel is ideal for commercial, residential, and agricultural roofing and siding applications requiring structural integrity and weather protection. In stock for Los Angeles pickup. Learn More

This industrial-grade 0.8mm (.030") flux core welding wire is engineered for high-performance fabrication and repair. Meeting AWS/ASME certification standards, it provides a stable arc and excellent bead appearance for general-purpose steel welding. Packaged in a convenient 11 lbs (1kg) spool. Learn More

26 Gauge Galvanized Steel PBR Panel, measuring 36 inches wide by 288 inches (24 feet) long. Produced to ASTM A653 standards, this panel offers excellent corrosion resistance from its protective zinc coating. The PBR (Purlin Bearing Rib) profile provides structural strength, making it ideal for roofing, siding, and agricultural building applications where durability and weather resistance are required. In stock for Los Angeles pickup. Learn More

3" x 1-1/2" Hot Rolled Steel Rectangular Tube with a 0.188" wall thickness. Conforms to ASTM A500 Grade B, offering 58,000 PSI tensile strength and excellent weldability. This hollow structural section (HSS) is ideal for trailer frames, building supports, and industrial machine bases where strength against bending and torsion is required. In stock for immediate Los Angeles pickup. Learn More

6" x 0.375" A500 Grade B Hot Rolled Steel Square Tube, sold in 240" lengths. Conforming to ASTM A500, this structural tubing provides 58,000 PSI tensile strength and excellent weldability. Its large profile and thick wall make it ideal for heavy-duty structural applications, including building frames, industrial supports, and heavy equipment bases. In stock for immediate Los Angeles pickup. Learn More

2" x 1/4" A36 Hot Rolled Steel Flat Bar, sold in 240" (20 ft) lengths. A versatile and economical structural steel conforming to ASTM A36, it has a minimum yield strength of 36,000 PSI and excellent weldability. This medium-width bar is ideal for structural bracing, equipment frames, base plates, and general fabrication projects. In stock for Los Angeles pickup. Learn More

6" x 6" Hot Rolled Steel Square Tube with a 0.188" wall thickness, in 20 ft lengths. This structural tubing conforms to ASTM A500 Grade B, offering a minimum yield strength of 46,000 PSI and excellent weldability. Its large profile is ideal for heavy-duty structural frames, building supports, industrial equipment bases, and large trailer manufacturing. In stock for same-day Los Angeles pickup. Learn More

This 2-1/2" Square Pressed Steel Cap provides a durable, clean finish for square tubing. Made from commercial-grade pressed steel, it is ideal for ornamental fencing, handrails, and gates. The cap is supplied with a raw, weldable finish for easy fabrication. Learn More

The 1-1/2 Double Lock Box is an industrial-grade hardware component for fabricating secure gate and fence locking systems. Made from weldable steel, it provides a durable housing for standard lock mechanisms, making it ideal for ornamental and security applications. Learn More

This 3/4 Inch Square Plastic Cap is designed for a secure fit on square tubing, providing a clean finish and protection. Made from durable, weather-resistant LDPE plastic, it is ideal for finishing fences, railings, and furniture. It meets general industrial quality standards for non-structural applications. Learn More

1-1/2" x 3/4" Hot Rolled Steel Rectangular Tube with a 0.065" wall, sold in 20-foot lengths. Conforms to ASTM A500 Grade B with 58,000 PSI tensile strength and excellent weldability. This hollow structural section (HSS) is ideal for trailer frames, equipment bases, gate frames, and other general fabrication projects requiring a good strength-to-weight ratio. In stock for Los Angeles pickup. Learn More

4" x 4" Hot Rolled Steel Square Tube with a 0.375" wall thickness, available in 20-foot lengths. This A500 Grade B structural tubing offers a minimum yield strength of 46,000 PSI and excellent weldability. The large profile and heavy wall make it ideal for heavy-duty structural frames, building supports, industrial equipment bases, and trailer manufacturing. In stock for same-day Los Angeles pickup. Learn More

1-1/2" x 1-1/2" Hot Rolled Steel Square Tube with a 0.08" wall, supplied in a 20-foot length. This A500 Grade B tube meets ASTM A500 standards, providing a minimum yield strength of 46,000 PSI and excellent weldability. Its dimensions make it ideal for structural frames, equipment bases, and general fabrication projects requiring robust, cost-effective material. In stock for Los Angeles pickup. Learn More

1018 Cold Rolled Steel Flat Bar, 1-1/2" wide by 1/8" thick in 144" lengths. Conforming to ASTM A108, this bar offers a tensile strength of 63,800 PSI, excellent machinability, and a smooth, scale-free surface. Its tight dimensional tolerances make it ideal for fabricating precision parts like mounting brackets, machine ways, and base plates. In stock for same-day Los Angeles pickup. Learn More

4" x 4" x 1/4" A36 Hot Rolled Steel Angle, sold in a 20-foot (240") length. This structural angle conforms to ASTM A36 standards, offering a minimum yield strength of 36,000 PSI and excellent weldability. The large profile provides robust support for heavy structural framing, industrial equipment bases, and building construction. A cost-effective and versatile choice for fabrication projects. In stock for same-day Los Angeles pickup. Learn More

1-1/2" x 1-1/2" Hot Rolled Steel Square Tube with a 0.18" wall thickness, supplied in 20-foot (240") lengths. This tubing conforms to ASTM A500 Grade B, offering a minimum yield strength of 46,000 PSI and excellent weldability. Its medium size is ideal for constructing durable structural frames, equipment bases, and support columns where strength and cost-effectiveness are key. In stock Los Angeles. Learn More

2-1/2" x 2-1/2" A500 Grade B Hot Rolled Steel Square Tube with a 0.065" wall, sold in 20-foot lengths. Conforms to ASTM A500 standards, featuring a minimum yield strength of 46,000 PSI and excellent weldability. This medium-sized structural tubing is a cost-effective solution for manufacturing trailer frames, equipment bases, roll cages, and general fabrication projects. In stock for immediate Los Angeles pickup. Learn More

Durable 1-1/4" x 1-1/4" x 16GA Galvanized Slotted Angle for versatile framing and support applications. Made from commercial-grade, corrosion-resistant galvanized steel conforming to ASTM A653 standards, it is ideal for constructing custom shelving, racks, and braces. Pre-punched slots allow for easy bolt-together assembly. Learn More

This 5/16" x 1" Hex Lag Screw is a heavy-duty fastener made from low carbon steel, meeting ASTM A307 standards. With a minimum tensile strength of 60,000 psi and a corrosion-resistant zinc plating, it ensures strong, reliable connections in wood framing and construction applications. Learn More

Our 12-inch industrial door spring is engineered from high-tensile spring steel for maximum durability and cycle life. Designed to meet ASTM A227/A228 performance standards, it provides reliable tension for heavy-duty commercial and industrial doors. Features a corrosion-resistant zinc-plated finish for long-lasting use. Learn More

This industrial-grade Galvanized Corner Guard is manufactured from 16 gauge steel for high-impact wall and corner protection. It features a G90 hot-dip galvanized coating compliant with ASTM A653 for excellent corrosion resistance in commercial and MRO applications. Learn More

This 1/4" x 2-1/2" Hex Lag Screw is manufactured from low carbon steel, conforming to ASTM A307 strength standards. The zinc-plated finish (ASTM B633) provides essential corrosion resistance, making it ideal for wood construction and framing applications. Learn More

The Bobco Auto-Darkening Welding Helmet offers superior protection, meeting ANSI/ISEA Z87.1+ safety standards. Featuring a 3.67” x 1.70” viewing area and a lightweight 1.07lb polycarbonate body, it ensures comfort and clarity for professional fabrication and MRO tasks. Learn More

20 Gauge (4' x 10') 304 Stainless Steel Sheet with a #4 brushed finish and protective PVC coating. Conforms to ASTM A240 with 73,200 PSI tensile strength, excellent formability, and corrosion resistance. The thin gauge is ideal for architectural trim, kitchen backsplashes, and protective paneling. In stock for immediate Los Angeles pickup. Learn More

Galvanized Slotted Angle is a versatile steel framing component ideal for constructing custom racks, shelves, and supports. Its galvanized finish provides excellent corrosion resistance, while the 16-gauge thickness ensures reliable performance for light to medium-duty MRO and fabrication projects. Learn More

The 4 Sq Pressed Steel Cap provides a durable, clean finish for square tubing and fence posts. Fabricated from high-quality pressed steel for excellent weldability and longevity. Ideal for ornamental ironwork and security fencing projects. Learn More

Our 16GA Galvanized Slotted Angle is a versatile framing component made from commercial-grade steel. The galvanized coating provides superior corrosion resistance in conformance with general ASTM standards, making it ideal for custom shelving, bracing, and MRO projects. Learn More

A 16 gauge galvanized steel corner guard providing robust impact and abrasion resistance for walls and edges. Manufactured to meet ASTM A653 standards for corrosion protection, this 2-1/2" x 2-1/2" x 36" guard is ideal for high-traffic commercial and industrial environments. The G90 galvanized finish ensures long-lasting durability. Learn More

This 0.9mm (.035") flux core welding wire is engineered for high-performance welding without external shielding gas. It meets AWS/ASME certification standards, providing reliable, strong welds for various steel fabrication projects. Packaged in a convenient 2.2 LBS (1KG) spool for portability and ease of use. Learn More

Galvanized Slotted Angle manufactured from durable 16 gauge steel for reliable performance in light to medium-duty applications. This 1-1/4" x 1-1/4" angle features a hot-dip galvanized finish conforming to ASTM A653 for superior corrosion resistance, ideal for custom framing, shelving, and MRO projects. Learn More

This 1-1/2" Sq Pressed Steel Cap provides a clean, protective finish for square tubing. Made from durable, weldable pressed steel, it is designed for ornamental fencing, gates, and railing projects. Meets industry standards for dimensional accuracy and fit. Learn More

A 1/2" x 4" Hex Lag Screw featuring a protective zinc plating per ASTM B633. Manufactured from low carbon steel compliant with ASTM A307 standards for reliable performance in light-duty framing and construction. Learn More

This 1-1/2" x 3-7/8" oval welding tab is manufactured from high-quality, weldable mild steel for superior strength and ease of use. At 9 gauge (0.15") thick with two pre-drilled holes, it provides a robust mounting point for industrial fabrication and MRO projects. Learn More

The Bobco Auto Darkening Weld Helmet provides superior protection, meeting ANSI/ISEA Z87.1+ standards for impact resistance. It features a large 3.94” x 3.15” viewing area for maximum visibility and is constructed from a lightweight, durable high-impact resistant material. Learn More

A 0.032" thick, 48" x 120" sheet of 3003-H14 aluminum. Conforms to ASTM B209, offering a balance of moderate strength (22,000 PSI tensile) and excellent formability. This thin gauge is lightweight, weldable, and corrosion-resistant, making it ideal for HVAC ductwork, electronic enclosures, formed brackets, and decorative panels. In stock Los Angeles. Learn More

12 Gauge (0.105") Galvanized Steel Sheet, 48" x 120". This sheet conforms to ASTM A653 and features a protective zinc coating applied via a hot-dip process for excellent corrosion resistance. Its medium thickness provides a balance of strength and formability, making it ideal for structural panels, HVAC ductwork, automotive components, and outdoor enclosures. In stock for same-day Los Angeles pickup. Learn More

22 Gauge 304 Stainless Steel Sheet with a #4 brushed finish and protective PVC coating, measuring 48" x 120". This versatile sheet conforms to ASTM A240, offering 73,200 PSI tensile strength and excellent corrosion resistance. Its thin gauge and clean finish make it ideal for architectural applications, kitchen backsplashes, decorative trim, and food processing equipment. In stock for Los Angeles pickup. Learn More

16 Gauge (0.0625") 304 Stainless Steel Sheet, 48" x 120", with a protective #4 brushed PVC finish. This versatile sheet conforms to ASTM A240 and offers 73,200 PSI tensile strength, excellent formability, and corrosion resistance. Ideal for architectural applications, kitchen backsplashes, and decorative panels. In stock for Los Angeles pickup. Learn More

18 Gauge 304 Stainless Steel Sheet (48" x 120") with a #4 brushed finish and protective PVC coating. Conforming to ASTM A240, this versatile sheet offers excellent corrosion resistance, formability, and 73,200 PSI tensile strength. Its lightweight yet durable profile is ideal for architectural panels, kitchen backsplashes, and food processing equipment. In stock for same-day Los Angeles pickup. Learn More

1-1/4" x 1-1/4" 304 Stainless Steel Square Tube with a 0.065" wall and a 180-grit satin finish. Conforming to ASTM A269, it offers 73,200 PSI tensile strength, excellent corrosion resistance, and superior weldability. Its combination of structural integrity and polished appearance makes it ideal for architectural handrails, support frames, and decorative applications. In stock for Los Angeles pickup. Learn More

2" x 2" x 0.120" wall 304 Stainless Steel Square Tube, supplied in 20-foot lengths. Conforms to ASTM A269 with 73,200 PSI tensile strength, excellent weldability, and superior corrosion resistance. This medium-sized tube is ideal for structural applications like equipment frames, support columns, architectural handrails, and guardrails where strength and aesthetics are required. In stock for same-day Los Angeles pickup. Learn More

16 gauge Cold Rolled Steel Sheet (48" x 120"), typically 1018 grade. Features 63,800 PSI tensile strength, excellent formability, and a smooth, clean surface that is ideal for painting and finishing. This thin gauge sheet is perfect for automotive panels, appliance casings, custom brackets, and enclosures. In stock for same-day Los Angeles pickup. Learn More

20 Gauge Galvanized Steel Sheet, 48" x 120" (4' x 10'). Conforms to ASTM A653, featuring a protective zinc coating for excellent corrosion resistance in outdoor environments. This thin gauge sheet is ideal for forming brackets, electronic enclosures, decorative panels, and HVAC ductwork. It combines the strength of steel with the durability of galvanization. In stock for immediate Los Angeles pickup. Learn More

1 Inch Schedule 40 Galvanized Steel Pipe, sold in 21-foot lengths. Conforms to ASTM A53 Grade B, providing 60,000 PSI tensile strength and superior corrosion resistance from its hot-dip zinc coating. This medium-diameter pipe is ideal for plumbing mains, structural posts, outdoor handrails, and fence framework. A reliable choice for applications requiring strength and weather protection. In stock for same-day Los Angeles pickup. Learn More

1-1/2" x 1-1/2" Type 304 Stainless Steel Square Tube with a 0.120" wall and a 180 grit satin finish. Conforming to ASTM A269, this tube offers 73,200 PSI tensile strength, excellent corrosion resistance, and superior weldability. Its medium size is ideal for architectural handrails, equipment frames, and structural supports. In stock Los Angeles. Learn More

3/16" x 3/4" Cold Rolled 1018 Steel Flat Bar, 144" length. Conforming to ASTM A108, this bar has a clean, scale-free surface, tight dimensional tolerances, and 63,800 PSI tensile strength. Its excellent machinability and good weldability make it a versatile choice for fabricating custom brackets, straps, and base plates. In stock Los Angeles. Learn More

Durable Galvanized Slotted Angle for versatile framing and support applications. Fabricated from commercial-grade steel with a corrosion-resistant galvanized finish meeting ASTM A653 coating standards. The 1-1/2" x 1-1/2" x 16GA profile provides reliable integrity for MRO and construction projects. Learn More

Our 5-inch barrel hinges are engineered from high-strength carbon steel for maximum durability and load capacity. Designed for weld-on applications, these hinges provide a robust pivot point for heavy gates, doors, and industrial equipment. They feature a grease zerk fitting for easy maintenance and extended service life. Learn More

This Galvanized Slotted Angle features a durable 16-gauge steel construction with a corrosion-resistant galvanized finish conforming to ASTM standards. Ideal for versatile industrial framing, shelving, and general MRO applications where a strong, bolt-together system is required. Learn More

Our 3x3/4 Barrel Hinges are heavy-duty, weld-on hardware engineered for high-load applications. Constructed from durable, unfinished weldable steel, they provide a robust pivot point for heavy gates, doors, and custom fabrication projects. These industrial-grade hinges ensure smooth, reliable operation and are ready for welding and finishing. Learn More

This 1" x 3/8" 6061-T6 Aluminum Flat Bar is a versatile, heat-treatable grade conforming to ASTM B211. It provides a high strength-to-weight ratio with 45,000 PSI tensile strength, good machinability, and excellent corrosion resistance. This medium-sized bar is ideal for structural bracing, machine ways, base plates, and custom fabricated parts. In stock for immediate Los Angeles pickup. Learn More

This 6061 Aluminum Flat Bar measures 2-1/2" wide by 1/8" thick. A highly versatile structural alloy, 6061-T6 conforms to ASTM B211 and offers 45,000 PSI tensile strength, excellent corrosion resistance, and good machinability. Its medium width is ideal for structural bracing, machine ways, base plates, and custom fabricated parts. In stock for same-day cutting and pickup in Los Angeles. Learn More

18 Gauge Galvanized Steel Sheet (4' x 10'). Conforming to ASTM A653, this sheet features a hot-dip zinc coating for excellent rust and corrosion resistance. The thin 18 gauge thickness is easy to form, making it ideal for HVAC ductwork, automotive panels, roofing, and protective enclosures. Its base steel provides good strength and durability for various fabrication projects. In stock for Los Angeles pickup. Learn More

1-1/2" x 3/8" Hot Rolled Steel Flat Bar, 240" length. A general-purpose structural steel conforming to ASTM A36 with a minimum yield strength of 36,000 PSI. This bar offers excellent weldability and is easy to drill, form, and machine. Its medium size is ideal for structural bracing, machine ways, base plates, and equipment repair projects. In stock for Los Angeles pickup. Learn More

Our 9-inch barrel hinges are engineered from high-strength, weldable steel for superior durability. Designed for heavy-duty industrial gates, doors, and security applications, these hinges provide smooth, reliable operation. The plateless design allows for direct, clean welding to frames and posts. Learn More

This 9-inch door spring is engineered from high-tensile spring steel for reliable, long-lasting tension in commercial and industrial doors. Designed for high-cycle applications, it ensures consistent performance and durability for MRO and new installations. Learn More

This Galvanized Slotted Angle measures 2-1/4" x 1-1/2" x 16GA in a 144" length. Manufactured from steel meeting ASTM A653 standards with a G90 galvanized coating, it offers superior corrosion resistance for custom framing, shelving, and MRO support structures. Learn More

Our 3x3 Heavy Duty Weldable Butt Hinges are engineered from high-strength, low-carbon steel for maximum durability. Designed for high-load applications, these hinges meet industrial fabrication standards (ANSI/BHMA A156.1 Grade 1) for reliable performance on heavy gates, doors, and equipment. Learn More

Galvanized Slotted Angle is a versatile framing material made from durable 16 gauge steel. Featuring a corrosion-resistant galvanized finish meeting ASTM A653 standards, it's ideal for constructing custom racks, supports, and maintenance frames. The pre-punched slotted pattern allows for easy, bolt-together assembly. Learn More

Galvanized Slotted Angle (1-1/2" x 1-1/2" x 16GA) is a versatile framing material made from durable, corrosion-resistant galvanized steel meeting ASTM A653 standards. It is perfect for constructing custom shelving, racks, and supports for industrial MRO and fabrication projects. The pre-punched slotted pattern allows for simple, bolt-together assembly. Learn More

Engineered for strength and durability, these 5x5 Heavy Duty Weldable Butt Hinges are essential for industrial gates, doors, and custom fabrication. Made from high-quality, weldable low-carbon steel, they provide a secure and permanent pivot point. Ideal for heavy-duty applications requiring robust performance. Learn More

Our industrial Fire Door Lock is engineered for critical safety applications in commercial and institutional buildings. This lock is certified to UL 10C standards for fire resistance and constructed from high-strength steel for maximum durability and security. It is designed for reliable performance on fire-rated door assemblies. Learn More

Versatile 1-1/4" x 1-1/4" x 16GA slotted angle for custom framing and support. This 120" angle is manufactured from commercial steel and features a galvanized coating (per ASTM A653) for excellent corrosion resistance, making it ideal for MRO and fabrication. Learn More

Our Galvanized Slotted Angle is a versatile steel framing component for general construction and MRO projects. Made from 16 gauge galvanized steel for superior corrosion resistance, this 1-1/2" x 1-1/2" angle provides reliable support for shelving, bracing, and custom frameworks that meet industrial manufacturing standards. Learn More

Galvanized Slotted Angle (2-1/4" x 1-1/2" x 16GA) crafted from low carbon steel with an ASTM A653 compliant galvanized coating for superior corrosion resistance. Ideal for constructing custom frames, racks, and supports in industrial and commercial applications. Learn More

Versatile 16-gauge galvanized slotted angle for industrial framing and support. This pre-punched steel angle (2-1/4" x 1-1/2" x 48") conforms to ASTM standards for strength and provides excellent corrosion resistance for MRO and custom fabrication projects. Learn More

Versatile 16-gauge steel slotted angle for framing and support, featuring a hot-dip galvanized finish for superior corrosion resistance. This product, measuring 2-1/4" x 1-1/2" x 120", provides a durable, bolt-together solution for industrial shelving, racks, and MRO projects. Learn More

This 1-1/2" x 2-1/2" Large Welding Tab is precision-cut from 1/8" thick, high-quality weldable low-carbon steel. Designed with a 3/8" hole for versatile mounting, it meets AWS D1.1 structural welding standards for reliable fabrication. Learn More