Search results for: 'grit zirconia flat dimens'

Durable 5/8 Inch Square Plastic Caps designed for a secure, press-fit on square tubing. Made from industrial-grade, weather-resistant plastic, these caps provide a clean, finished appearance while protecting against dirt, moisture, and sharp edges. Ideal for fencing, furniture, and equipment fabrication. Learn More

Secure equipment and materials with the Regal 2” x 20ft Ratchet Cargo Lash. This industrial tie-down is made from durable polyester webbing, meets WSTDA-T-1 standards, and features a 3,335 lbs Working Load Limit (WLL) for reliable performance. Learn More

The C45 Cap Rail is an industrial-grade ornamental fitting forged from Class 25-30 gray cast iron. It is designed with a 1-¾” width to securely fit over a standard 1-½” rail, providing a durable and decorative finish for handrail and fencing systems. Learn More

1-1/2" x 1-1/2" x 0.065" wall Hot Rolled Steel Square Tube, 20 ft length. A structural tubing conforming to ASTM A500 Grade B, offering a minimum yield strength of 46,000 PSI and excellent weldability. This medium-sized HSS (Hollow Structural Section) is a cost-effective choice for trailer frames, structural supports, and industrial equipment bases. In stock for immediate pickup in Los Angeles. Learn More

This 4" 6061-T6 Aluminum Channel offers an excellent strength-to-weight ratio for structural applications. Conforming to ASTM B308, it delivers 45,000 PSI tensile strength, superior corrosion resistance, and excellent weldability. Its larger profile is ideal for equipment bases, industrial supports, and heavy-duty framing. In stock for immediate Los Angeles pickup. Learn More

12 Gauge (48" x 120") Cold Rolled Steel Sheet, typically 1018 grade. Conforms to ASTM A1008 specifications and provides a tensile strength of 63,800 PSI. The cold reduction process creates a smooth, clean surface finish and tight dimensional tolerances, making it ideal for forming and welding. Excellent for automotive panels, appliance casings, and equipment enclosures. In stock for Los Angeles pickup. Learn More

24 Gauge Galvanized Steel B-Deck measuring 36 inches wide by 120 inches long. This structural panel conforms to ASTM A653, providing excellent corrosion resistance from its protective zinc coating. With a high strength-to-weight ratio, it is an economical solution for roofing, siding, and floor decking systems. Ideal for residential, commercial, and agricultural construction. In stock for immediate Los Angeles pickup. Learn More

26 Gauge Galvanized Steel PBR (Purlin Bearing Rib) Sheet, measuring 36 inches wide by 96 inches long. Conforms to ASTM A653, offering excellent corrosion resistance from its protective zinc coating. The base steel provides a minimum 36,000 PSI yield strength for structural integrity. Ideal for residential roofing, commercial siding, and agricultural building applications. In stock and ready for pickup in Los Angeles. Learn More

3/4" x 16GA Hot Rolled Steel Square Tube, 240" length. Conforms to ASTM A500 Grade B with 58,000 PSI tensile strength and excellent weldability. Ideal for lightweight structural applications like frames, supports, and general fabrication. Its small profile is suited for gate frames, equipment guards, and bracing. In stock for Los Angeles pickup. Learn More

1-1/4" x 0.120" wall Hot Rolled Steel Square Tube, 240" length. Conforms to ASTM A500 Grade B, with 46,000 PSI minimum yield strength and excellent weldability. This medium-sized structural tubing offers a high strength-to-weight ratio, making it ideal for trailer frames, equipment bases, roll cages, and general fabrication projects. In stock for immediate pickup in Los Angeles. Learn More

3/8" x 3/8" 6061-T6 Aluminum Square Bar in 144" lengths. This versatile structural alloy conforms to ASTM B211 and provides a high strength-to-weight ratio, good machinability, and excellent weldability. The 45,000 PSI tensile strength makes it ideal for small brackets, machine parts, jigs, and fixtures. In stock for Los Angeles pickup. Learn More

1/4" x 1/4" 1018 Cold Rolled Steel Square Bar, 144" length. Conforms to ASTM A108 with 63,800 PSI tensile strength, excellent machinability, and tight dimensional tolerances. The cold drawn finish provides a clean, smooth surface ideal for precision parts. This small square bar is perfect for shafts, dowels, pins, and fixtures. In stock for Los Angeles pickup. Learn More

3/8" x 3/8" 1018 Cold Rolled Steel Square Bar, 144" length. Conforms to ASTM A108 with a tensile strength of 63,800 PSI. The cold drawing process provides tight dimensional tolerances and a clean, smooth surface finish, ideal for machining. This small size is excellent for shafts, dowels, pins, and fixtures. In stock for Los Angeles pickup. Learn More

1/8" thick Hot Rolled Steel Diamond Plate, available in 48" x 120" sheets. Made from durable A36 steel and conforming to ASTM A786 for pattern and skid resistance. This plate offers excellent weldability and strength, making it ideal for high-traffic applications like industrial flooring, ramps, stair treads, and truck bed liners. Its raised pattern provides multi-directional grip. In stock for Los Angeles pickup. Learn More

3/4" x 48" x 120" A36 Hot Rolled Steel Plate. Conforms to ASTM A36 with a minimum yield strength of 36,000 PSI. This large-format plate provides excellent weldability and good machinability for structural applications. Its substantial thickness is ideal for heavy-duty base plates, gussets, equipment mounting, and general fabrication projects requiring robust support. In stock for same-day Los Angeles pickup. Learn More

1/2" x 1/2" 304 Stainless Steel Square Bar, 144" length. Conforms to ASTM A276, offering an excellent balance of strength, corrosion resistance, and weldability. With 73,200 PSI tensile strength, this versatile bar is ideal for structural supports, frames, shafts, and general fabrication. Its clean finish is suitable for architectural and food-grade applications. In stock for Los Angeles pickup. Learn More

3" x 1-1/2" Hot Rolled Steel Rectangular Tube with a 0.188" wall thickness. Conforms to ASTM A500 Grade B, offering 58,000 PSI tensile strength and excellent weldability. This hollow structural section (HSS) is ideal for trailer frames, building supports, and industrial machine bases where strength against bending and torsion is required. In stock for immediate Los Angeles pickup. Learn More

A 4" x 2" x 0.250" wall Hot Rolled Steel Rectangular Tube manufactured to ASTM A500 Grade B specifications. This structural grade tubing offers a minimum 58,000 PSI tensile strength and excellent weldability. The heavy wall provides superior load-bearing capacity for building frames, trailer construction, and industrial supports. In stock for same-day Los Angeles pickup. Learn More

3/4" x 3/4" x 1/8" 304 Stainless Steel Angle. An austenitic grade conforming to ASTM A276, this angle provides excellent corrosion resistance and weldability with 73,200 PSI tensile strength. Its small profile is ideal for creating lightweight structural frames, mounting brackets, corner guards, and decorative architectural trim where both strength and a clean finish are required. In stock for immediate Los Angeles pickup. Learn More

Hot rolled steel rectangular tube measuring 4" x 1-1/2" with a 0.083" wall, in 20 ft (240") lengths. Manufactured to ASTM A500 Grade B specifications, this structural tubing provides 58,000 PSI tensile strength and excellent weldability. Its large profile offers a high strength-to-weight ratio, ideal for building frames, trailer construction, and industrial supports. In stock for same-day pickup in Los Angeles. Learn More

1" x 1" Hot Rolled Steel Square Tube with a 16 gauge (0.065") wall thickness, sold in 240" (20-foot) lengths. Conforming to ASTM A500 Grade B, this tubing provides a minimum 46,000 PSI yield strength, making it ideal for structural applications. Its excellent weldability is suited for trailer frames, supports, equipment bases, and general fabrication projects. In stock for immediate Los Angeles pickup. Learn More

1/2" x 1/2" 1018 Cold Rolled Square Bar in 144" lengths. Produced to ASTM A108 standards, this low-carbon steel offers a clean surface, tight dimensional tolerances, and excellent machinability. With a tensile strength of 63,800 PSI, it is ideal for medium-duty applications like shafts, fixtures, and precision machined components where a superior finish is required. In stock for Los Angeles pickup. Learn More

4" x 4" Hot Rolled Steel Square Tube with a 0.375" wall thickness, available in 20-foot lengths. This A500 Grade B structural tubing offers a minimum yield strength of 46,000 PSI and excellent weldability. The large profile and heavy wall make it ideal for heavy-duty structural frames, building supports, industrial equipment bases, and trailer manufacturing. In stock for same-day Los Angeles pickup. Learn More

The C199 is a durable cast iron component designed for 1-1/2" cap rail systems. This ornamental hardware is engineered for a precise fit in ADA-compliant handrail and fencing applications, providing both structural integrity and a decorative finish. Learn More

3/4" x 3/4" 304 Stainless Steel Square Bar, 144" length. Conforms to ASTM A276 specifications. This austenitic grade combines 73,200 PSI tensile strength with excellent corrosion resistance and weldability. The medium 3/4" profile is ideal for structural supports, frames, shafts, and braces in food processing and architectural applications. In stock for Los Angeles pickup. Learn More

5/8" x 5/8" 1018 Cold Rolled Square Bar in 144" lengths. Produced to ASTM A108 standards, this bar offers a tensile strength of 63,800 PSI, excellent machinability, and a superior surface finish. Its tight dimensional tolerances make it ideal for shafts, fixtures, and precision machined components requiring minimal prep work. In stock for same-day Los Angeles pickup. Learn More

Durable 1-1/2 inch square plastic cap designed for a secure fit on square tubing. Made from high-quality, weather-resistant Low-Density Polyethylene (LDPE), this cap provides a clean, finished appearance and protects against debris. Learn More

This 10" x 1/8" x 1" abrasive cut-off wheel is engineered for high-speed metal cutting applications. Featuring fiberglass reinforcement for durability and safety, it is fully compliant with ANSI B7.1 standards. Designed for tools operating at or below a maximum speed of 6,100 RPM. Learn More

Our 3x3 Heavy Duty Weldable Butt Hinges are engineered from high-strength, low-carbon steel for maximum durability. Designed for high-load applications, these hinges meet industrial fabrication standards (ANSI/BHMA A156.1 Grade 1) for reliable performance on heavy gates, doors, and equipment. Learn More

This 4-1/2" x .040" x 7/8" cut-off wheel is an industrial-grade abrasive engineered for high-speed cutting. It is ANSI B7.1 compliant and features fiberglass reinforcement for enhanced safety and durability during metal fabrication and MRO tasks. Learn More

This 12" x 7/64" Cut-Off Wheel is an industrial-grade abrasive tool compliant with ANSI B7.1 safety standards. Engineered with fiberglass reinforcement for a maximum speed of 5,100 RPM, it is designed for fast, clean cuts on various metals. The 1" arbor hole fits standard stationary cut-off machines. Learn More

Engineered for strength and durability, these 5x5 Heavy Duty Weldable Butt Hinges are essential for industrial gates, doors, and custom fabrication. Made from high-quality, weldable low-carbon steel, they provide a secure and permanent pivot point. Ideal for heavy-duty applications requiring robust performance. Learn More

This 8 x ½ Pan Head Phillips Truss Screw is a versatile fastener made from low carbon steel. It features a zinc plating with CR3+ passivate compliant with ASTM B633 for reliable corrosion resistance. The wide truss head provides an excellent bearing surface for thin materials. Learn More

This 5/16" x 1" Hex Lag Screw is a heavy-duty fastener made from low carbon steel, meeting ASTM A307 standards. With a minimum tensile strength of 60,000 psi and a corrosion-resistant zinc plating, it ensures strong, reliable connections in wood framing and construction applications. Learn More

This 1/4" x 2-1/2" Hex Lag Screw is manufactured from low carbon steel, conforming to ASTM A307 strength standards. The zinc-plated finish (ASTM B633) provides essential corrosion resistance, making it ideal for wood construction and framing applications. Learn More

This 1/8" 6013 All-Purpose Welding Rod is an AWS/ASME certified electrode designed for versatile performance. With a 60,000 psi tensile strength, its mild steel core and flux coating ensure a stable arc and easy slag removal, making it ideal for general fabrication and repair. Learn More

The 1-1/4 Inch Square Plastic Cap provides a clean, finished look for square tubing applications. Made from durable, weather-resistant black plastic, it protects against sharp edges and internal debris. This cap offers a secure press-fit for reliability in fencing, furniture, and equipment fabrication. Learn More

This 2-1/2 Inch Post Ball Cap is a high-quality ornamental component crafted from durable Class 25-30 gray iron. It provides a classic, protective finish for fence posts, gates, and handrails. Engineered for long-lasting performance in architectural and fabrication projects. Learn More

4" x 4" x 1/2" A36 Hot Rolled Steel Angle, 240" length. This structural angle provides a minimum 36,000 PSI yield strength and excellent weldability, conforming to ASTM A36. Its large size is ideal for heavy structural applications, including building frames, equipment bases, and industrial supports. The hot rolled finish has a mill scale surface. In stock and available for Los Angeles pickup. Learn More

Hot Rolled Steel Rectangular Tube, 1-1/2" x 1" with a 0.065" wall thickness. Conforms to ASTM A500 Grade B with a minimum tensile strength of 58,000 PSI. This structural grade tube offers an excellent strength-to-weight ratio and is easily welded. Ideal for equipment frames, trailer cross-members, and structural supports. In stock for same-day Los Angeles pickup. Learn More

The 1 Sq Pressed Steel Cap is a durable, weldable finishing component for 1-inch square tubing. Made from low-carbon mild steel, it provides a clean, protective end for fence posts, railings, and metal furniture. Designed for easy integration in fabrication projects. Learn More

This 1-1/2" Sq Pressed Steel Cap provides a clean, protective finish for square tubing. Made from durable, weldable pressed steel, it is designed for ornamental fencing, gates, and railing projects. Meets industry standards for dimensional accuracy and fit. Learn More

Our Galvanized Slotted Angle is a versatile steel framing component ideal for custom shelving, racks, and bracing. Manufactured from durable steel with a corrosion-resistant galvanized finish, this 16 gauge angle provides reliable performance for MRO and fabrication projects. The pre-punched slots allow for easy, bolt-together assembly. Learn More

The 1-1/2 Double Lock Box is an industrial-grade hardware component for fabricating secure gate and fence locking systems. Made from weldable steel, it provides a durable housing for standard lock mechanisms, making it ideal for ornamental and security applications. Learn More

This 1 1/4" x 1 3/4" small welding tab is manufactured from high-quality, weldable low-carbon steel. Featuring a 1/8" thickness and a 3/8" hole, it provides a reliable connection point for industrial fabrication and repair projects compatible with AWS certified consumables. Learn More

Our 3-1/2x2-1/4 Weldable Butt Hinges are engineered from high-strength, low-carbon steel for maximum weld penetration and durability. These components are designed for heavy-duty applications where a permanent, strong pivot is required. Ideal for steel gates, doors, and MRO projects. Learn More

This 6063 Aluminum Angle measures 2" x 1" with a 1/8" wall thickness and 144" length. Known as architectural aluminum, it conforms to ASTM B308 and provides a tensile strength of 27,000 PSI. Its excellent corrosion resistance and superior surface finish make it ideal for decorative trim, window frames, and railings. In stock for same-day pickup in Los Angeles. Learn More

1-1/2" x 16 Gauge Galvanized Square Tube, sold in 24-foot lengths. Conforms to ASTM A500 Grade B with 58,000 PSI tensile strength. The hot-dip zinc coating provides excellent corrosion resistance for outdoor applications. Its medium size is ideal for trailer frames, gate construction, and structural supports. In stock for same-day Los Angeles pickup. Learn More

6" x 2" Hot Rolled Steel Rectangular Tube with a 0.188" (3/16") wall thickness. This A500 Grade B structural tubing meets ASTM A500 specifications and provides a minimum yield strength of 46,000 PSI. Its high strength-to-weight ratio makes it ideal for building frames, trailer manufacturing, and heavy equipment supports. In stock for same-day Los Angeles pickup. Learn More

1" x 1" A500B Hot Rolled Steel Square Tube with a 0.09" wall thickness, in 240" lengths. This structural tubing conforms to ASTM A500 Grade B and provides 58,000 PSI tensile strength. Its excellent weldability and high strength-to-weight ratio make it ideal for building frames, trailer manufacturing, and general fabrication. In stock for same-day Los Angeles pickup. Learn More

1-1/4" x 0.065" Hot Rolled Steel Square Tube, 20-foot length. This A500 Grade B structural tubing conforms to ASTM A500 and provides a minimum yield strength of 46,000 PSI. With excellent weldability and a high strength-to-weight ratio, it's ideal for manufacturing trailer frames, equipment bases, roll cages, and general structural supports. In stock for immediate pickup in Los Angeles. Learn More

1-1/4" x 1-1/4" x 1/8" 304 Stainless Steel Angle, sold in 20 ft (240") lengths. This versatile angle conforms to ASTM A276 and provides 73,200 PSI tensile strength, excellent corrosion resistance, and superior weldability. Its small profile is ideal for light structural framing, manufacturing equipment guards, support brackets, and architectural trim. In stock and available for same-day pickup in Los Angeles. Learn More

4" x 3" x 1/2" A36 Hot Rolled Steel Angle, 20-foot length. A versatile structural profile conforming to ASTM A36 with a minimum yield strength of 36,000 PSI and excellent weldability. The large leg size makes it ideal for heavy structural applications, including building frames, industrial supports, and equipment manufacturing. This unequal leg angle provides robust support for load-bearing applications. In stock Los Angeles. Learn More

3" x 1" Hot Rolled Steel Rectangular Tube with a 0.065" wall thickness, available in 20-foot lengths. Manufactured to ASTM A500 Grade B specifications, this structural tubing provides a tensile strength of 58,000 PSI and excellent weldability. Its high strength-to-weight ratio makes it ideal for building frames, trailer construction, support columns, and industrial equipment bases. In stock for immediate pickup in Los Angeles. Learn More

Hot Rolled Steel Rectangular Tube measuring 4" x 2" with a 0.188" wall thickness. Manufactured from A500 Grade B steel, this structural tubing meets ASTM A500 specifications and offers a minimum tensile strength of 58,000 PSI. Its high strength-to-weight ratio and excellent weldability make it ideal for building frames, trailer construction, and heavy-duty supports. In stock for immediate Los Angeles pickup. Learn More

5" x 2" Hot Rolled Steel Rectangular Tube with a 0.180" wall thickness, in 20-foot lengths. Manufactured to ASTM A500 Grade B specifications, this structural tubing provides a minimum yield strength of 46,000 PSI and excellent weldability. Its large profile offers superior strength and rigidity, making it ideal for trailer frames, heavy equipment bases, and structural supports. In stock for immediate Los Angeles pickup. Learn More

Hot Rolled Steel Rectangular Tube, 6" x 4" with a 0.188" wall thickness. Manufactured to ASTM A500 Grade B, this structural tubing offers a high strength-to-weight ratio with 58,000 PSI tensile strength and excellent weldability. The large profile provides superior resistance to bending and torsional stress, ideal for heavy structural frames, equipment bases, and trailer construction. In stock for Los Angeles pickup. Learn More

3" x 3" A500 Grade B Hot Rolled Steel Square Tube with a 0.06" wall thickness, supplied in a 240" length. This structural tubing conforms to ASTM A500 and offers a minimum yield strength of 46,000 PSI. Its excellent weldability and high strength-to-weight ratio make it ideal for fabricating trailer frames, equipment supports, roll cages, and general structural applications. In stock for immediate pickup in Los Angeles. Learn More

3" x 3" x 0.120" wall Hot Rolled Steel Square Tube, 20-foot length. A structural grade tube conforming to ASTM A500 Grade B, it has a minimum yield strength of 46,000 PSI and excellent weldability. The hot rolled finish has a dark mill scale. Ideal for constructing trailer frames, building supports, equipment bases, and general fabrication projects requiring strength and durability. In stock for Los Angeles pickup. Learn More

This 1/2 Inch Square Plastic Cap is made from durable, weather-resistant Low-Density Polyethylene (LDPE). It provides a secure, friction-fit for finishing square tubing, protecting against sharp edges and internal contamination in fabrication and MRO applications. Learn More

Our 4-inch Tube Ring is a high-quality decorative component forged from industrial-grade Class 25-30 gray cast iron. Designed for durability and easy integration, it's ideal for ornamental fencing, gates, and architectural fabrication projects. Learn More

Durable Galvanized Slotted Angle for versatile framing and support applications. Fabricated from commercial-grade steel with a corrosion-resistant galvanized finish meeting ASTM A653 coating standards. The 1-1/2" x 1-1/2" x 16GA profile provides reliable integrity for MRO and construction projects. Learn More

The Flower Welding Tab 1 x 3 is a versatile fabrication component made from high-quality, weldable mild steel. These tabs provide secure mounting and connection points, ideal for various industrial and ornamental welding projects. They are designed for reliability and ease of use in professional fabrication settings. Learn More

4" x 1-1/2" Hot Rolled Steel Rectangular Tube with a 0.065" wall, manufactured to ASTM A500 Grade B specifications. This structural grade tubing offers a minimum 46,000 PSI yield strength and excellent weldability, making it ideal for fabrication. Its high strength-to-weight ratio is perfect for trailer frames, structural supports, and machine bases. In stock for immediate Los Angeles pickup. Learn More

This 1-1/4" square pressed steel cap provides a clean, finished look for fence posts and railings. Made from durable, weldable mild steel, it protects post interiors from debris and weather. Ideal for ornamental and security fencing applications. Learn More

Our 2 Inch Square Plastic Cap is an industrial-grade finishing component made from durable, low-density polyethylene (LDPE). It provides a secure, press-fit closure for square tubing, protecting against moisture and debris while offering a clean, professional appearance. Learn More

The 1-1/2 Inch Post Ball Cap is a high-quality ornamental hardware component designed for fencing and architectural applications. Fabricated from durable Class 25-30 gray iron or A356 aluminum, it provides a classic, finished look to any metal post. This decorative cap is engineered for a precise fit on 1-1/2 inch square or round tubing. Learn More

Durable 16 gauge galvanized steel slotted angle for versatile framing and support applications. Features a G90 galvanized coating for superior corrosion resistance. Ideal for industrial shelving, equipment bracing, and general MRO fabrication projects. Learn More

Versatile 1-1/4" x 1-1/4" x 16GA slotted angle for custom framing and support. This 120" angle is manufactured from commercial steel and features a galvanized coating (per ASTM A653) for excellent corrosion resistance, making it ideal for MRO and fabrication. Learn More

Durable 1-1/4" x 1-1/4" x 16GA Galvanized Slotted Angle for versatile framing and support applications. Made from commercial-grade, corrosion-resistant galvanized steel conforming to ASTM A653 standards, it is ideal for constructing custom shelving, racks, and braces. Pre-punched slots allow for easy bolt-together assembly. Learn More

Our Galvanized Slotted Angle is a versatile steel framing component for general construction and MRO projects. Made from 16 gauge galvanized steel for superior corrosion resistance, this 1-1/2" x 1-1/2" angle provides reliable support for shelving, bracing, and custom frameworks that meet industrial manufacturing standards. Learn More

Constructed from durable steel, this 16-gauge slotted angle features a corrosion-resistant galvanized finish meeting ASTM A653 standards. The 1-1/2" x 1-1/2" profile is pre-punched for versatile, bolt-together assembly of custom racks, frames, and supports in MRO and fabrication applications. Learn More

Galvanized Slotted Angle (2-1/4" x 1-1/2" x 16GA) crafted from low carbon steel with an ASTM A653 compliant galvanized coating for superior corrosion resistance. Ideal for constructing custom frames, racks, and supports in industrial and commercial applications. Learn More

Versatile 16-gauge steel slotted angle for framing and support, featuring a hot-dip galvanized finish for superior corrosion resistance. This product, measuring 2-1/4" x 1-1/2" x 120", provides a durable, bolt-together solution for industrial shelving, racks, and MRO projects. Learn More

The L-Clip Welding Tab is a critical fabrication component made from high-quality, weldable mild steel. Measuring 1-1/2" x 3-1/2", this tab is engineered for creating strong, precise fixturing points and conforms to general industry standards for material quality and weldability. Learn More

Our 6x6 Heavy Duty Weldable Butt Hinges are engineered for maximum strength in demanding applications. Forged from high-quality, low-carbon weldable steel, these hinges provide a robust pivot point for heavy gates and industrial doors. The plain steel finish is ready for welding and custom coating. Learn More

This 2" Square Pressed Steel Cap provides a clean, protective finish for square tubing and fence posts. Fabricated from durable, weldable mild steel, it prevents water ingress and adds a professional aesthetic to any ornamental ironwork project. Learn More

This 1-¼” Single Hole Lockbox is fabricated from high-quality, weldable steel. Designed for security gate and fence applications, it provides a durable housing for standard lock mechanisms. Its single-hole configuration ensures straightforward installation and compatibility. Learn More

This Small Slide Bolt features a durable 1/2" diameter steel shaft for reliable latching. Manufactured from industrial-grade low-carbon steel similar to ASTM A307 material, it provides a simple and effective security solution for light-duty doors and gates. Its robust construction ensures long-lasting performance in MRO and fabrication applications. Learn More

This 1-¼" x 3-¼" L-Clip Welding Tab is a high-quality fabrication component made from durable, weldable mild steel. Designed for structural connections and reinforcement, it conforms to AWS welding practices for strength and reliability. Ideal for creating strong, permanent weld points in MRO and new construction projects. Learn More

This 2-1/2" Square Pressed Steel Cap provides a durable, clean finish for square tubing. Made from commercial-grade pressed steel, it is ideal for ornamental fencing, handrails, and gates. The cap is supplied with a raw, weldable finish for easy fabrication. Learn More

Our 1-1/4 Double Lock Box is a durable gate hardware component crafted from high-strength Class 25-30 gray cast iron. Designed for 1-1/4" square tubing, it provides a secure housing for lock mechanisms in ornamental fences and security gates. Ideal for industrial fabrication and commercial applications. Learn More

The 3 Inch Post Ball Cap is a durable, decorative finial for fence posts and railings. Manufactured from high-strength Class 25-30 gray iron, it provides a classic architectural finish and protects the post top from weather. Ideal for both new fabrication and MRO projects. Learn More

Engineered for durability, these 4x4 Heavy Duty Weldable Butt Hinges are fabricated from high-grade, weldable carbon steel. Their robust construction provides a reliable pivot point for heavy gates, doors, and industrial enclosures. Supplied unfinished for easy welding and custom finishing. Learn More

5/8" diameter Cold Rolled All Thread Rod in a 10 ft length, featuring a zinc-plated finish for corrosion resistance. Made from low-carbon steel that meets the strength requirements of ASTM A307 Grade A. Offers good weldability and strength for general-purpose fastening, bracing, and support applications in construction and manufacturing. In stock for immediate Los Angeles pickup. Learn More

6061-T6 Aluminum Round Tube with a 1-1/2" outside diameter and 0.125" wall thickness, sold in 144" lengths. This drawn seamless tube conforms to ASTM B210 and offers 45,000 PSI tensile strength. It combines good workability with excellent corrosion resistance and weldability, making it ideal for structural frames, railings, and machined components. In stock for immediate pickup in Los Angeles. Learn More

3/4 inch diameter Cold Rolled All Thread Rod in a 120-inch length with a zinc-plated finish for corrosion resistance. Manufactured from low-carbon steel, its strength conforms to ASTM A307 Grade A with a typical tensile strength of 63,800 PSI. This versatile, continuously threaded rod is ideal for general-purpose fastening, bracing, and anchoring applications in construction and industrial settings. In stock Los Angeles. Learn More

1-inch diameter Cold Rolled All Thread Rod in a 120-inch length with a zinc plated finish. This rod meets ASTM A307 Grade A strength requirements, with a base material tensile strength of 63,800 PSI. The zinc plating provides good corrosion resistance for general-purpose fastening, anchoring systems, and suspending HVAC fixtures. In stock for immediate Los Angeles pickup. Learn More

5/8" x 16 gauge A500B Galvanized Steel Square Tube, 24 ft length. Conforms to ASTM A500 with 58,000 PSI tensile strength. The hot-dip zinc coating provides excellent corrosion resistance for outdoor applications. This small profile is ideal for light structural frames, gates, railings, and agricultural uses. In stock for Los Angeles pickup. Learn More

4" x 4" x 1/4" A36 Hot Rolled Steel Angle, sold in a 20-foot (240") length. This structural angle conforms to ASTM A36 standards, offering a minimum yield strength of 36,000 PSI and excellent weldability. The large profile provides robust support for heavy structural framing, industrial equipment bases, and building construction. A cost-effective and versatile choice for fabrication projects. In stock for same-day Los Angeles pickup. Learn More

A36 Hot Rolled Steel Channel, size C3 x 4.1 (3" Height x 1.41" Flange). Conforms to ASTM A36 with a minimum yield strength of 36,000 PSI. This structural C-channel offers excellent weldability and good machinability, making it ideal for equipment frames, vehicle chassis, structural supports, and general fabrication projects. In stock Los Angeles. Learn More

6" x 12.5 lbs/ft Hot Rolled Standard I-Beam, available in 20-foot lengths. Made from A36 grade steel, it meets ASTM A36 standards and provides a minimum yield strength of 36,000 PSI. This large structural beam is ideal for building frames, mezzanine supports, and heavy equipment bases due to its excellent load-bearing capacity and weldability. In stock for same-day Los Angeles pickup. Learn More

5/8" x 5/8" Hot Rolled Steel Square Tube with a 0.065" wall thickness, supplied in 20-foot lengths. Conforming to ASTM A500 Grade B, this structural tubing offers a minimum yield strength of 46,000 PSI and excellent weldability. Its small profile is ideal for lightweight frames, supports, brackets, and general fabrication projects where strength and economy are key. In stock for same-day Los Angeles pickup. Learn More

Hot Rolled Steel Square Tube measuring 1-1/4" x 1-1/4" with a 0.080" wall thickness, in 20-foot lengths. Manufactured to ASTM A500 Grade B standards, this tubing provides 46,000 PSI minimum yield strength and excellent weldability. Its strength-to-weight ratio makes it ideal for structural frames, equipment bases, and general fabrication projects requiring robust, cost-effective material. In stock for immediate Los Angeles pickup. Learn More

1-1/2" x 1-1/2" Hot Rolled Steel Square Tube with a 0.18" wall thickness, supplied in 20-foot (240") lengths. This tubing conforms to ASTM A500 Grade B, offering a minimum yield strength of 46,000 PSI and excellent weldability. Its medium size is ideal for constructing durable structural frames, equipment bases, and support columns where strength and cost-effectiveness are key. In stock Los Angeles. Learn More

2" x 2" Hot Rolled Steel Square Tube with a 0.065" wall thickness, sold in 240" (20 ft) lengths. This A500 Grade B structural tubing offers 58,000 PSI tensile strength and excellent weldability per ASTM A500. Its high strength-to-weight ratio makes it ideal for trailer frames, equipment bases, and general fabrication. In stock for Los Angeles pickup. Learn More

2-1/2" x 2-1/2" A500 Grade B Hot Rolled Steel Square Tube with a 0.065" wall, sold in 20-foot lengths. Conforms to ASTM A500 standards, featuring a minimum yield strength of 46,000 PSI and excellent weldability. This medium-sized structural tubing is a cost-effective solution for manufacturing trailer frames, equipment bases, roll cages, and general fabrication projects. In stock for immediate Los Angeles pickup. Learn More

2-1/2" x 0.120" wall A500 Grade B Hot Rolled Steel Square Tube, sold in 20 ft lengths. Conforming to ASTM A500, it offers 58,000 PSI tensile strength and excellent weldability. This medium-sized structural tubing is ideal for equipment frames, handrails, trailer manufacturing, and general fabrication projects requiring a high strength-to-weight ratio. In stock for same-day Los Angeles pickup. Learn More

3/4" x 3/4" A36 Hot Rolled Steel Square Bar, available in 240" (20 ft) lengths. This general-purpose structural steel conforms to ASTM A36, providing 36,000 PSI minimum yield strength and excellent weldability. Its medium size is ideal for equipment frames, structural bracing, trailer components, and general fabrication. In stock for Los Angeles pickup. Learn More

This 2" x 1" x 1/8" 6063-T5 Aluminum Channel is a versatile architectural profile. Conforming to ASTM B308, it offers 27,000 PSI tensile strength, excellent corrosion resistance, and a superior surface finish ideal for anodizing. Its medium size is perfect for manufacturing window frames, railing systems, and custom enclosures. In stock and available for same-day Los Angeles pickup with custom cutting services. Learn More