Search results for: 'sizes may inches'

2 inch diameter 6061-T6 Aluminum Round Bar, 144" length. Conforms to ASTM B211, offering 45,000 PSI tensile strength, good machinability, and excellent corrosion resistance. This medium-diameter bar is a versatile choice for shafts, axles, structural components, and general-purpose machined parts. In stock for immediate Los Angeles pickup. Learn More

Our 5-inch barrel hinges are constructed from high-strength, weldable steel for maximum durability. Engineered for heavy-duty gates and doors, these hinges provide a smooth, reliable pivot point for industrial fabrication and MRO projects. The plateless design allows for direct welding to steel surfaces. Learn More

26 Gauge Galvanized Steel PBR (Purlin Bearing Rib) Sheet, measuring 36 inches wide by 96 inches long. Conforms to ASTM A653, offering excellent corrosion resistance from its protective zinc coating. The base steel provides a minimum 36,000 PSI yield strength for structural integrity. Ideal for residential roofing, commercial siding, and agricultural building applications. In stock and ready for pickup in Los Angeles. Learn More

A 3-inch diameter heavy-duty hitch ball constructed from solid, hot-forged steel for maximum strength and durability. The corrosion-resistant chrome-plated finish ensures reliable performance in demanding weather conditions. This large ball size is engineered for gooseneck couplers and heavy industrial trailers, providing a secure connection for your most substantial loads. In stock for immediate Los Angeles pickup. Learn More

24 Gauge Galvanized Steel B-Deck measuring 36 inches wide by 120 inches long. This structural panel conforms to ASTM A653, providing excellent corrosion resistance from its protective zinc coating. With a high strength-to-weight ratio, it is an economical solution for roofing, siding, and floor decking systems. Ideal for residential, commercial, and agricultural construction. In stock for immediate Los Angeles pickup. Learn More

1" x 1" x 3/16" 304 Stainless Steel Angle in a 240-inch length. Conforming to ASTM A276, this material provides excellent corrosion resistance and weldability with a tensile strength of 73,200 PSI. Its small profile is ideal for light structural support, custom brackets, architectural trim, and equipment framing where both strength and a clean finish are required. In stock for immediate Los Angeles pickup. Learn More

Size 10, 16-inch heavy-duty rubber rain boots. Designed for maximum protection in wet and muddy environments, these boots feature 100% waterproof construction and a rugged, slip-resistant outsole for secure footing on slippery surfaces. The durable yet flexible rubber material ensures all-day comfort for construction, landscaping, and general industrial use. In stock for immediate pickup at our Los Angeles location. Learn More

1 Inch Schedule 40 Hot Rolled Black Pipe, sold in 21-foot lengths. Manufactured to ASTM A53 Grade B standards, it offers 60,000 PSI tensile strength and excellent weldability. This medium-sized pipe is ideal for natural gas lines, fire sprinkler systems, scaffolding, and general structural fabrication. An economical choice for fluid conveyance and support applications. In stock for Los Angeles pickup. Learn More

2 inch Schedule 40 Hot Rolled Black Pipe. Conforms to ASTM A53 Grade B standards, offering 60,000 PSI tensile strength and excellent weldability for strong, reliable joints. This medium-sized pipe is ideal for plumbing mains, HVAC piping, fire sprinkler systems, and structural applications like handrails and support posts. In stock and ready for same-day pickup in Los Angeles. Learn More

1/4 inch diameter Cold Rolled All Thread Rod with a zinc plated finish for corrosion resistance. Continuous threading along its 120-inch length provides versatile fastening. Made from low-carbon steel conforming to ASTM A307 strength requirements, it offers 63,800 PSI tensile strength. Ideal for light-duty bracing, suspending conduit, and creating custom-length fasteners. In stock for same-day Los Angeles pickup. Learn More

1-1/4 inch Nominal Pipe Size (NPS), Schedule 40 Hot Rolled Black Pipe in a 21 ft length. Manufactured to ASTM A53 Grade B standards, this carbon steel pipe offers 60,000 PSI tensile strength and excellent weldability. The medium diameter is ideal for plumbing mains, fire sprinkler systems, and structural applications. In stock for Los Angeles pickup. Learn More

7/16 inch diameter 1018 Cold Rolled Round Bar in 144-inch lengths. Produced to ASTM A108 standards, this bar offers 53,700 PSI yield strength, excellent machinability, and a smooth, scale-free surface. Its tight dimensional tolerances make it ideal for high-precision applications. This small diameter is perfect for manufacturing dowel pins, small shafts, and fastener blanks. In stock for immediate Los Angeles pickup. Learn More

1/2 inch Nominal Pipe Size (NPS) Hot Rolled Black Pipe with a Schedule 40 wall. This product conforms to ASTM A53 Grade B specifications, providing 60,000 PSI tensile strength and excellent weldability. The small diameter is ideal for plumbing, natural gas lines, compressed air systems, and light structural applications like handrails. Standard uncoated 'black' finish. In stock for Los Angeles pickup. Learn More

3" x 3" x 1/4" 304 Stainless Steel Angle, 240" length. Conforms to ASTM A276, offering 73,200 PSI tensile strength, excellent corrosion resistance, and superior weldability. This medium-sized angle is ideal for structural framing, equipment bases, shelving, and architectural trim. The durable, non-magnetic properties make it suitable for food processing and construction applications. In stock for immediate Los Angeles pickup. Learn More

2" Nominal Pipe Size (NPS) Galvanized Steel Pipe, Schedule 40 wall, 21-foot length. Conforms to ASTM A53 Grade B with 60,000 PSI tensile strength. The hot-dip zinc coating provides excellent corrosion resistance for outdoor and high-moisture use. Ideal for plumbing mains, HVAC piping, handrails, and structural posts. In stock for same-day Los Angeles pickup. Learn More

1-inch diameter 304 Stainless Steel Round Bar, 144" length. Conforms to ASTM A276, providing 73,200 PSI tensile strength with excellent corrosion resistance and weldability. This versatile austenitic grade is ideal for a wide range of applications. Its medium diameter is perfectly suited for shafts, axles, architectural supports, and machined components. In stock for Los Angeles pickup. Learn More

This 1-1/2" x 3/16" 304 Stainless Steel Angle offers excellent corrosion resistance and weldability for structural applications. Conforming to ASTM A276, it provides 73,200 PSI tensile strength. Its versatile 1-1/2" leg size is ideal for medium-duty structural framing, equipment bases, shelving, and architectural trim where both strength and a clean finish are required. In stock for immediate Los Angeles pickup. Learn More

1-1/2" nominal pipe size (NPS) 304 Stainless Steel Pipe, Schedule 40 x 20' length. Conforms to ASTM A312, offering excellent corrosion resistance and 73,200 PSI tensile strength. This medium-sized pipe is ideal for plumbing mains, process piping, and structural posts where durability and reliability are essential. In stock for same-day cutting and pickup in Los Angeles. Learn More

3-1/2 inch Nominal Pipe Size (NPS), Schedule 40 Hot Rolled Black Pipe in a 252" (21 ft) length. This product conforms to ASTM A53 Grade B, offering 60,000 PSI tensile strength and excellent weldability. As a large diameter pipe, it is ideal for main water lines, industrial process piping, structural columns, and large-scale fabrication projects. In stock and available for same-day pickup in Los Angeles. Learn More

6063-T5 Aluminum Pipe with a 1-1/2 inch nominal size and standard Schedule 40 wall thickness. This seamless extruded pipe conforms to ASTM B241 specifications and offers 27,000 PSI tensile strength. Known as "architectural aluminum," its excellent corrosion resistance and superior surface finish make it ideal for handrails, frames, and furniture. In stock for immediate cutting and pickup in Los Angeles. Learn More

1-1/4" x 1-1/4" x 3/16" 304 Stainless Steel Angle, sold in 240-inch lengths. Conforming to ASTM A276, this versatile austenitic grade offers excellent corrosion resistance and weldability with a tensile strength of 73,200 PSI. Its small profile is ideal for creating light structural frames, mounting brackets, corner guards, and architectural trim. In stock for Los Angeles pickup. Learn More

A36 Hot Rolled Steel Flat Bar, 1" wide by 3/8" thick in a 240-inch length. This general-purpose structural steel conforms to ASTM A36, offering a minimum yield strength of 36,000 PSI and excellent weldability. Its medium width is ideal for structural bracing, machine ways, support brackets, and general fabrication projects. In stock for same-day Los Angeles pickup. Learn More

6063-T5 Aluminum Angle with 2" x 2" legs, 1/8" thickness, and 144" length. Conforms to ASTM B308, offering 27,000 PSI tensile strength. Known as architectural aluminum, it has excellent corrosion resistance, formability, and a superior surface finish ideal for anodizing. This medium-sized angle is perfect for window frames, handrails, and decorative trim. In stock for Los Angeles pickup. Learn More

1/2" x 1" 304 Stainless Steel Flat Bar in 144" lengths. Conforming to ASTM A276, this versatile bar offers 73,200 PSI tensile strength, excellent corrosion resistance, and superior weldability. Its rectangular profile is ideal for structural bracing, equipment frames, and architectural trim. The medium size provides a good balance of strength and workability for fabricators and machinists. In stock for Los Angeles pickup. Learn More

2" x 2" x 1/4" Type 304 Stainless Steel Angle, 240" length. Conforms to ASTM A276, offering excellent corrosion resistance and weldability with 73,200 PSI tensile strength. This versatile, medium-sized angle is ideal for structural framing, equipment bases, shelving, and architectural trim where both strength and a clean finish are required. In stock for immediate Los Angeles pickup or delivery. Learn More

304 Stainless Steel Flat Bar measuring 3" wide by 1/4" thick in a 144" length. Certified to ASTM A276, this versatile bar offers 73,200 PSI tensile strength, excellent corrosion resistance, and superior weldability. Its medium size is ideal for fabricating structural braces, supports, base plates, and components for food processing equipment. In stock Los Angeles. Learn More

A 6" wide by 3/8" thick 304 Stainless Steel Flat Bar in a 144" length. This austenitic stainless grade conforms to ASTM A276, offering excellent corrosion resistance and weldability. Its substantial size is ideal for heavy structural applications like base plates, gussets, and equipment mounts where strength and longevity are critical. In stock for Los Angeles pickup. Learn More

5" x 3/8" A36 Hot Rolled Steel Flat Bar. This structural steel conforms to ASTM A36, providing a minimum yield strength of 36,000 PSI and excellent weldability for easy fabrication. The large 5-inch width makes it a robust choice for heavy structural components, equipment bases, die components, and machinery mounting plates. In stock and available for custom cutting and same-day Los Angeles pickup. Learn More

2" x 2" x 0.120" wall 304 Stainless Steel Square Tube, supplied in 20-foot lengths. Conforms to ASTM A269 with 73,200 PSI tensile strength, excellent weldability, and superior corrosion resistance. This medium-sized tube is ideal for structural applications like equipment frames, support columns, architectural handrails, and guardrails where strength and aesthetics are required. In stock for same-day Los Angeles pickup. Learn More

2 Inch by 3/16 Inch Hot Rolled Steel Flat Bar, 240 inches long. Made from A36 structural steel, conforming to ASTM A36 specifications. This bar offers a minimum yield strength of 36,000 PSI and excellent weldability for easy fabrication. Its medium width is ideal for structural bracing, machine ways, wear strips, and general repairs. In stock and available for same-day pickup in Los Angeles. Learn More

A36 Hot Rolled Steel Flat Bar measuring 4 inches wide by 1/8 inch thick, in a 240-inch length. This structural steel conforms to ASTM A36 and provides a minimum yield strength of 36,000 PSI. Its excellent weldability and formability make it a versatile choice. The large width is ideal for manufacturing base plates, heavy structural supports, and frame components. In stock for Los Angeles pickup. Learn More

This 1-1/4" x 1-1/4" x 1/4" Type 304 Stainless Steel Angle conforms to ASTM A276. It provides a tensile strength of 73,200 PSI, excellent corrosion resistance, and superior weldability. Its small leg size makes it ideal for light structural supports, brackets, corner guards, and architectural trim. In stock Los Angeles. Learn More

2" x 3/4" Hot Rolled Steel Flat Bar in 240-inch lengths. Made from A36 structural steel, this bar conforms to ASTM A36 standards and provides a minimum yield strength of 36,000 PSI. Its excellent weldability and formability make it a versatile choice for a wide range of applications, including structural bracing, machinery mounting plates, and general fabrication. In stock for Los Angeles pickup. Learn More

4" x 4" x 0.120" wall 304 Stainless Steel Square Tube, 240" length. Meets ASTM A269 specifications. This large structural tube offers 73,200 PSI tensile strength, excellent corrosion resistance, and superior weldability. Its substantial size is ideal for heavy-duty applications like structural columns, industrial supports, and large equipment frames. In stock for same-day cutting and pickup in Los Angeles. Learn More

1-1/4" wide by 1/4" thick 304 Stainless Steel Flat Bar, sold in 144" lengths. This austenitic chromium-nickel alloy complies with ASTM A276 and has a tensile strength of 73,200 PSI. It combines excellent weldability with remarkable corrosion resistance. Its medium size is ideal for structural bracing, equipment framework, and general fabrication projects. In stock for same-day Los Angeles pickup. Learn More

A36 Hot Rolled Steel Angle with 3" and 2" legs and a 3/16" thickness. This structural angle conforms to ASTM A36 specifications, providing a minimum yield strength of 36,000 PSI and excellent weldability. Its medium size is ideal for structural framing, equipment bases, support brackets, and general fabrication projects requiring robust, cost-effective steel components. In stock for same-day pickup in Los Angeles. Learn More

A36 Hot Rolled Steel Angle measuring 2" x 2" with a 1/4" thickness, in a 240" length. This structural angle conforms to ASTM A36 and offers a minimum yield strength of 36,000 PSI, excellent weldability, and good formability. Its medium size is ideal for structural framing, equipment bases, shelving, and general fabrication projects. In stock for same-day Los Angeles pickup. Learn More

A36 Hot Rolled Steel Angle measuring 2" x 2" with a 3/8" thickness, supplied in a 20-foot (240") length. This structural angle conforms to ASTM A36 standards, offering a minimum yield strength of 36,000 PSI and excellent weldability. Its medium size is ideal for equipment frames, structural bracing, and heavy-duty shelving supports. In stock and ready for same-day pickup in Los Angeles. Learn More

5" x 1/2" Hot Rolled A36 Steel Flat Bar, supplied in 240-inch (20-foot) lengths. This structural steel bar conforms to ASTM A36 and offers a minimum yield strength of 36,000 PSI with excellent weldability and formability. Its large cross-section is ideal for manufacturing heavy-duty base plates, structural supports, trailer frames, and other general fabrication projects requiring robust strength. In stock for immediate Los Angeles pickup. Learn More

3" x 1/2" 304 Stainless Steel Flat Bar, 144" length. Conforms to ASTM A276. This versatile austenitic stainless offers excellent corrosion resistance and weldability with 73,200 PSI tensile strength. Its medium size is ideal for structural bracing, machine ways, wear strips, and architectural trim. In stock and ready for same-day pickup in Los Angeles. Learn More

304 Stainless Steel Flat Bar measuring 2" wide by 3/16" thick, in a 144" length. This versatile bar meets ASTM A276 standards and offers 73,200 PSI tensile strength, excellent corrosion resistance, and superior weldability. Its medium size is ideal for structural bracing, machine components, food equipment frames, and architectural trim. In stock for same-day Los Angeles pickup. Learn More

4" x 3" x 1/2" A36 Hot Rolled Steel Angle, 20-foot length. A versatile structural profile conforming to ASTM A36 with a minimum yield strength of 36,000 PSI and excellent weldability. The large leg size makes it ideal for heavy structural applications, including building frames, industrial supports, and equipment manufacturing. This unequal leg angle provides robust support for load-bearing applications. In stock Los Angeles. Learn More

1" x 1/4" Hot Rolled Steel Flat Bar, 240" length. Conforms to ASTM A36, a low-carbon structural steel with 58,000 PSI tensile strength and excellent weldability. This versatile bar is easy to form, drill, and machine. Its medium size is ideal for structural bracing, equipment frames, base plates, and general fabrication projects. In stock for immediate Los Angeles pickup. Learn More

This 1-1/2" x 1-1/2" x 1/8" angle is manufactured from Type 304 stainless steel, conforming to ASTM A276 specifications. It offers a tensile strength of 73,200 PSI, excellent corrosion resistance, and superior weldability. Its medium size is ideal for structural framing, equipment bases, brackets, and architectural trim where both strength and a clean finish are required. In stock for same-day Los Angeles pickup. Learn More

1-1/4" x 1/2" A36 Hot Rolled Steel Flat Bar, sold in 240-inch (20 ft) lengths. This structural steel conforms to ASTM A36 and provides a minimum yield strength of 36,000 PSI. Its excellent weldability and formability make it a versatile choice for general fabrication. This medium-width bar is ideal for structural bracing, equipment frames, and base plates. In stock for Los Angeles pickup. Learn More

Protect your hands with our industrial-grade Goat Leather Driving Gloves. These gloves are rated to ANSI/ISEA 105 standards, providing excellent dexterity and durability for material handling. The premium goat leather construction ensures a comfortable fit and reliable protection for MRO and fabrication tasks. Learn More

2" x 1/8" A36 Hot Rolled Steel Flat Bar, available in 20-foot lengths. This structural steel bar conforms to ASTM A36, providing a minimum yield strength of 36,000 PSI and excellent weldability. Its medium size is versatile for structural bracing, equipment frames, base plates, and general fabrication projects. The hot-rolled finish has a characteristic scale. In stock for same-day Los Angeles pickup. Learn More

1" x 1/2" A36 Hot Rolled Steel Flat Bar, 240" length. ASTM A36 certified with a minimum yield strength of 36,000 PSI and excellent weldability. The hot rolling process gives it a scaly mill finish. This medium-sized bar is ideal for structural bracing, machine ways, support brackets, and general fabrication projects. In stock for immediate Los Angeles pickup. Learn More

6" x 1/2" 1018 Cold Rolled Steel Flat Bar, 144" length. Conforms to ASTM A108 with 63,800 PSI tensile strength and excellent machinability. The cold drawing process provides tight dimensional tolerances and a smooth, scale-free finish. Its substantial 6-inch width makes it ideal for base plates, heavy structural components, and die sets. In stock for Los Angeles pickup. Learn More

This 1" x 3/8" 6061-T6 Aluminum Flat Bar is a versatile, heat-treatable grade conforming to ASTM B211. It provides a high strength-to-weight ratio with 45,000 PSI tensile strength, good machinability, and excellent corrosion resistance. This medium-sized bar is ideal for structural bracing, machine ways, base plates, and custom fabricated parts. In stock for immediate Los Angeles pickup. Learn More

This 2" x 1" 6061-T6 Aluminum Flat Bar is a versatile, heat-treatable grade offering a superior combination of strength, workability, and corrosion resistance. Conforming to ASTM B211, it provides 45,000 PSI tensile strength and excellent weldability. Its medium size is ideal for structural bracing, machine ways, and custom fabricated parts. Cut to length and available for same-day pickup in Los Angeles. Learn More

A36 Hot Rolled Steel Flat Bar, 1-1/2" wide by 3/16" thick, in 240-inch lengths. Conforms to ASTM A36 with 36,000 PSI minimum yield strength. This low-carbon steel offers excellent weldability and good formability. As a medium-width bar, it is ideal for structural bracing, equipment frames, base plates, and general fabrication projects. In stock for immediate Los Angeles pickup. Learn More

2-1/2" x 2-1/2" x 3/16" 304 Stainless Steel Angle, available in 20-foot lengths. This versatile austenitic stainless angle conforms to ASTM A276, offering 73,200 PSI tensile strength, excellent corrosion resistance, and superior weldability. Its medium size is ideal for structural framing, equipment bases, shelving, and architectural trim where both strength and a clean finish are required. In stock for Los Angeles pickup. Learn More

26 Gauge Galvanized PBR Steel Sheet, measuring 36 inches wide by 120 inches long. Conforming to ASTM A653, this panel features a protective zinc coating for excellent corrosion resistance. With a base steel yield strength of 36,000 PSI, it's ideal for roofing, siding, and agricultural structures. Its lightweight profile simplifies installation. In stock for Los Angeles pickup. Learn More

This 6" x 1/2" 304 Stainless Steel Flat Bar is a versatile, corrosion-resistant structural material sold in 144" lengths. Conforming to ASTM A276, it provides 73,200 PSI tensile strength, excellent weldability, and superior formability. Its substantial size makes it ideal for manufacturing heavy-duty base plates, structural framing, and equipment supports in food processing and architectural applications. In stock for Los Angeles pickup. Learn More

A36 Hot Rolled Steel Angle measuring 1-3/4" x 1-3/4" with a 3/16" thickness. This structural angle conforms to ASTM A36 standards and offers a minimum yield strength of 36,000 PSI and excellent weldability. The hot-rolled process results in a scaled finish. Its medium size is ideal for structural framing, equipment bases, bracing, and general fabrication projects requiring robust, easy-to-weld steel. In stock in Los Angeles. Learn More

A 1" x 3/8" 304 Stainless Steel Flat Bar, 144" in length. This versatile bar meets ASTM A276 standards and offers 73,200 PSI tensile strength, excellent corrosion resistance, and superior weldability. Its medium size is ideal for structural bracing, machine components, supports, and general fabrication projects requiring strength and longevity. In stock for same-day pickup in Los Angeles. Learn More

Hot Rolled Steel Angle, 2-1/2" x 2-1/2" x 1/2". A36 steel conforms to ASTM A36, providing 36,000 PSI minimum yield strength and excellent weldability. This medium-sized angle is ideal for structural framing, equipment bases, and support brackets where strength and reliability are critical. Its hot-rolled surface is ready for fabrication and welding. In stock for Los Angeles pickup. Learn More

304 Stainless Steel Flat Bar, 1-1/2" wide by 1/4" thick. Conforms to ASTM A276, this versatile bar offers excellent corrosion resistance, weldability, and 73,200 PSI tensile strength. Its medium size is ideal for structural bracing, machine ways, equipment frames, and architectural trim. Annealed condition provides good formability. In stock and available for same-day pickup in Los Angeles. Learn More

1 Inch Schedule 40 Galvanized Steel Pipe, sold in 21-foot lengths. Conforms to ASTM A53 Grade B, providing 60,000 PSI tensile strength and superior corrosion resistance from its hot-dip zinc coating. This medium-diameter pipe is ideal for plumbing mains, structural posts, outdoor handrails, and fence framework. A reliable choice for applications requiring strength and weather protection. In stock for same-day Los Angeles pickup. Learn More

3" x 2" x 0.250" wall Hot Rolled Steel Rectangular Tube, 20-foot length. Conforms to ASTM A500 Grade B, a structural specification with a minimum yield strength of 46,000 PSI. This tube offers an excellent strength-to-weight ratio and is easily welded. Its medium size is ideal for constructing trailer frames, machinery bases, support columns, and general structural fabrication. In stock for Los Angeles pickup. Learn More

6061-T6 Aluminum Flat Bar, 1-1/4" wide by 3/16" thick. This versatile bar conforms to ASTM B211 and combines high strength (45,000 PSI tensile) with excellent workability and corrosion resistance. Its medium size is ideal for structural bracing, machine ways, wear strips, and custom brackets. In stock for Los Angeles pickup. Learn More

3/16" x 1-1/4" 304 Stainless Steel Flat Bar, 144" length. Conforms to ASTM A276, this versatile bar offers 73,200 PSI tensile strength, excellent corrosion resistance, and superior weldability. Its medium size is ideal for structural bracing, equipment framework, and architectural trim. A non-magnetic, austenitic grade perfect for food processing and general fabrication. In stock for immediate Los Angeles pickup. Learn More

A36 Hot Rolled Steel Flat Bar measuring 1-3/4" wide by 3/8" thick, in 240" lengths. Conforming to ASTM A36, this bar offers a minimum yield strength of 36,000 PSI and excellent weldability. Its medium size makes it ideal for structural bracing, machine ways, base plates, and general fabrication projects. In stock and ready for same-day pickup in Los Angeles. Learn More

A 1-1/4" x 3/8" Type 304 Stainless Steel Flat Bar, 144" long. Conforming to ASTM A276, this bar offers excellent corrosion resistance and weldability with a tensile strength of 73,200 PSI. Its versatile medium size is ideal for structural bracing, equipment framework, base plates, and general fabrication projects. In stock for same-day Los Angeles pickup. Learn More

3/4 inch Nominal Pipe Size (NPS) Schedule 40 Galvanized Steel Pipe, 21 ft length. Manufactured to ASTM A53 Grade B specifications, this pipe offers a minimum tensile strength of 60,000 PSI and superior corrosion resistance from its hot-dip zinc coating. Ideal for outdoor structures, non-potable water plumbing, handrails, and fencing. In stock and available for same-day pickup in Los Angeles. Learn More

2" x 2" x 0.120" wall 304 Stainless Steel Square Tube, supplied in 20-foot (240") lengths with a 180-grit satin finish. This tube conforms to ASTM A269 and provides 73,200 PSI tensile strength, excellent corrosion resistance, and superior weldability. Its medium size is ideal for architectural handrails, structural framing, support columns, and equipment enclosures. In stock Los Angeles for immediate pickup or delivery. Learn More

304 Stainless Steel Flat Bar, 1" wide by 3/16" thick. Conforming to ASTM A276, this bar offers a versatile combination of excellent corrosion resistance, high ductility, and superior weldability. Its 73,200 PSI tensile strength makes it ideal for structural bracing, equipment frames, and architectural trim. This medium-sized bar is a reliable choice for fabrication projects. In stock for immediate Los Angeles pickup. Learn More

1-1/2" x 1-1/2" x 0.065" wall 304 Stainless Steel Square Tube, supplied in 20-foot lengths. Conforms to ASTM A269 with a tensile strength of 73,200 PSI. This tube features a 180 grit satin finish, excellent corrosion resistance, and superior weldability. Its medium size is ideal for architectural handrails, equipment frames, support structures, and decorative applications. In stock for immediate Los Angeles pickup. Learn More

1-1/2" x 1-1/2" Type 304 Stainless Steel Square Tube with a 0.120" wall and a 180 grit satin finish. Conforming to ASTM A269, this tube offers 73,200 PSI tensile strength, excellent corrosion resistance, and superior weldability. Its medium size is ideal for architectural handrails, equipment frames, and structural supports. In stock Los Angeles. Learn More

1/8" x 1-1/2" 304 Stainless Steel Flat Bar, 144" length. Conforms to ASTM A276, providing 73,200 PSI tensile strength, excellent weldability, and superior corrosion resistance. This versatile, medium-sized bar is ideal for structural bracing, machine components, architectural trim, and food processing equipment framework. In stock for same-day cutting and Los Angeles pickup. Learn More

3/4 inch 1018 Cold Rolled Steel Square Bar, sold in 144" lengths. This general-purpose low-carbon steel conforms to ASTM A108, offering excellent machinability and a clean, smooth surface finish. The cold drawing process increases strength to 63,800 PSI and provides tight dimensional tolerances, making it ideal for shafts, fixtures, and precision machined parts. In stock Los Angeles. Learn More

1018 Cold Rolled Steel Flat Bar, measuring 1/4" thick by 1-3/4" wide. This bar conforms to ASTM A108 and offers superior dimensional accuracy and a smooth, scale-free surface due to the cold drawing process. With 63,800 PSI tensile strength, its medium size is ideal for manufacturing base plates, mounting brackets, and structural components requiring precision. In stock for immediate Los Angeles pickup. Learn More

1-1/4" x 1-1/4" Stainless Steel Square Tube with a 0.120" wall and 180 grit satin finish. This 304 grade tube conforms to ASTM A269 and features 73,200 PSI tensile strength, excellent weldability, and corrosion resistance. Its medium size is ideal for structural frames, architectural handrails, and support columns. In stock for same-day cutting and pickup in Los Angeles. Learn More

A36 Hot Rolled Steel Flat Bar measuring 1-1/2" wide by 3/4" thick in 20-foot lengths. This structural steel conforms to ASTM A36, offering 58,000 PSI tensile strength and excellent weldability. The medium size is ideal for structural bracing, machine ways, equipment frames, and general fabrication projects. Its rough, scaled surface is suitable where strength is the primary concern. In stock Los Angeles. Learn More

This 3/4" diameter 1018 Cold Rolled Round Bar is a 144-inch low-carbon steel product conforming to ASTM A108. It offers a tensile strength of 63,800 PSI, superior dimensional accuracy, and a smooth, scale-free surface. Known for its excellent machinability and good weldability, it is ideal for producing shafts, axles, and precision machined components. In stock for immediate pickup in Los Angeles. Learn More

4 Inch x 3/16 Inch A36 Hot Rolled Steel Flat Bar. This structural steel bar conforms to ASTM A36 and features a minimum yield strength of 36,000 PSI with excellent weldability. The large 4-inch width is ideal for heavy-duty applications including structural base plates, trailer frames, equipment mounting, and general fabrication projects requiring robust support. In stock and ready for same-day pickup in Los Angeles. Learn More

1/2" diameter Cold Rolled All Thread Rod, supplied in 120-inch lengths with a zinc plated finish for corrosion resistance. Conforming to the strength requirements of ASTM A307, this rod offers a tensile strength of 63,800 PSI. Its continuous threading provides maximum versatility for custom-length fasteners, anchoring systems, and structural bracing. In stock for same-day Los Angeles pickup. Learn More

1/2" x 1-1/2" 304 Stainless Steel Flat Bar, 144" long. This versatile austenitic grade conforms to ASTM A276, delivering a balance of strength, excellent corrosion resistance, and superior weldability. Its medium size is ideal for structural bracing, equipment framework, machine ways, and architectural supports. In stock for immediate Los Angeles pickup. Learn More

1/4" x 1/2" Cold Rolled 1018 Steel Flat Bar, 144" length. Conforms to ASTM A108 standards, offering 63,800 PSI tensile strength, tight dimensional tolerances, and excellent machinability. The smooth, scale-free cold drawn finish is ideal for precision parts. This small size is perfect for manufacturing brackets, shims, and straps. In stock for same-day Los Angeles pickup. Learn More

1" x 1" 304 Stainless Steel Square Bar, 144" length. This versatile bar meets ASTM A276 specifications and offers an excellent combination of strength (73,200 PSI tensile) and corrosion resistance. Its weldability and formability make it a standard for general fabrication. Medium size is ideal for structural supports, machine frames, braces, and shafts. In stock for immediate Los Angeles pickup. Learn More

1/8 inch diameter 6061-T6 Aluminum Round Bar, 144 inches long. This versatile alloy conforms to ASTM B211 and features 45,000 PSI tensile strength, excellent machinability, and superior corrosion resistance. Its small diameter is perfect for producing pins, dowels, small shafts, and other precision turned parts requiring high strength and a good surface finish. In stock for same-day pickup in Los Angeles. Learn More

1/2 Inch x 1 Inch 6061-T6 Aluminum Flat Bar, 144" length. Conforms to ASTM B211, offering a versatile combination of 45,000 PSI tensile strength, good machinability, and excellent corrosion resistance. This heat-treatable grade is ideal for structural framing, base plates, and machined components where strength and light weight are required. In stock for same-day Los Angeles pickup. Learn More

1-1/2 inch OD x 0.065 inch wall Hot Rolled Steel Round Tube, 240 inches long. Produced to ASTM A500 Grade B specifications, this tubing provides a minimum yield strength of 46,000 PSI and excellent weldability for structural applications. The medium diameter is ideal for machinery frames, handrails, and general fabrication. In stock for immediate cutting and Los Angeles pickup. Learn More

1" NPS Schedule 40 pipe manufactured from 304 stainless steel, supplied in a 240" (20 ft) length. Conforming to ASTM A312, it provides excellent weldability and corrosion resistance with a tensile strength of 73,200 PSI. This versatile size is ideal for fluid transport, industrial plumbing, and structural applications like handrails and support posts. In stock for Los Angeles pickup. Learn More

A 3/16" x 4" Cold Rolled 1018 Steel Flat Bar, 144 inches long. Produced to ASTM A108 standards, this bar provides a tensile strength of 63,800 PSI, tight dimensional tolerances, and excellent machinability. The smooth, scale-free surface is ideal for applications requiring a clean finish. Suitable for base plates, structural components, and machine parts. In stock Los Angeles. Learn More

1-1/4" x 1-1/4" 6061-T6 Aluminum Square Tube with a 0.125" wall thickness. Conforms to ASTM B221. This structural alloy provides an excellent strength-to-weight ratio with 45,000 PSI tensile strength, plus great machinability and weldability. Its medium size is ideal for structural frames, machine guards, railings, and custom fabrications. In stock and ready for same-day pickup in Los Angeles. Learn More

1-inch diameter A36 Hot Rolled Steel Round Bar in 240-inch (20 ft) lengths. This general-purpose structural steel conforms to ASTM A36 and provides a minimum yield strength of 36,000 PSI. Its excellent weldability and formability make it a top choice for fabrication projects, support braces, shafts, and axles. Available for same-day pickup in Los Angeles. Learn More

Our 5-inch barrel hinges are engineered from high-strength carbon steel for maximum durability and load capacity. Designed for weld-on applications, these hinges provide a robust pivot point for heavy gates, doors, and industrial equipment. They feature a grease zerk fitting for easy maintenance and extended service life. Learn More

Size 11 rubber work boots with a 16-inch height, providing substantial waterproof protection for demanding job sites. Designed for durability and comfort in wet conditions, these boots are essential safety gear for construction, landscaping, and industrial applications. Keep your feet dry and protected with this reliable footwear, in stock for pickup in Los Angeles. Learn More

This 6 inch by 3/8 inch 1018 Cold Rolled Steel Flat Bar offers tight dimensional tolerances and a smooth, scale-free surface. Conforming to ASTM A108, it has a tensile strength of 63,800 PSI and excellent machinability. Its large width makes it ideal for base plates, structural gussets, and heavy equipment mounting. In stock for Los Angeles pickup. Learn More

5/16 inch diameter 304 Stainless Steel Round Bar, 144" length. Conforms to ASTM A276 and delivers 73,200 PSI tensile strength. This versatile grade combines excellent corrosion resistance with superior weldability and good formability. Its small diameter is ideal for creating precision pins, dowels, fastener blanks, and small shafts. In stock for same-day Los Angeles pickup. Learn More

7/8 inch diameter 1018 Cold Rolled Round Bar, sold in 144-inch lengths. Conforms to ASTM A108 with 63,800 PSI tensile strength and excellent machinability. The cold drawn process provides a smooth finish and tight dimensional tolerances. This medium-diameter bar is ideal for shafts, axles, pins, and general-purpose machined components. In stock for Los Angeles pickup. Learn More

Size 9 industrial-grade rubber rain boots featuring a 16-inch height for superior protection in wet and muddy conditions. Built with a 100% waterproof, seamless construction and a slip-resistant lug outsole for secure traction on demanding job sites. Ideal for construction, landscaping, and general maintenance work. In stock for Los Angeles pickup. Learn More

3/4" x 3/8" 1018 Cold Rolled Flat Bar, 144" length. Conforms to ASTM A108 with 63,800 PSI tensile strength. The cold drawing process provides a smooth, scale-free finish and tight dimensional tolerances, making it excellent for machining and welding. This small size is ideal for making brackets, straps, shims, and small frame stock. In stock for Los Angeles pickup. Learn More

2-1/2" x 2-1/2" x 0.180" wall Hot Rolled Steel Square Tube, 240" length. Conforms to ASTM A500 Grade B, providing 46,000 PSI yield strength and excellent weldability. This medium-sized structural tubing is a cost-effective solution for manufacturing equipment frames, trailer components, and general fabrication projects requiring a high strength-to-weight ratio. In stock for Los Angeles pickup. Learn More

1/2" diameter 304 Stainless Steel Round Bar in 144" lengths. This versatile, general-purpose stainless conforms to ASTM A276 specifications. It offers 73,200 PSI tensile strength, excellent corrosion resistance, and superior weldability. Ideal for medium-sized shafts, structural supports, food-grade equipment, and architectural applications. In stock for immediate Los Angeles pickup. Learn More

9/16" 1018 Cold Rolled Hexagon Bar, 144" length. Conforms to ASTM A108 specifications with 63,800 PSI tensile strength and excellent machinability. The cold drawn process provides a smooth finish and tight dimensional tolerances. This medium-sized hex bar is ideal for manufacturing fasteners, shafts, hydraulic fittings, and other machined components. In stock for immediate Los Angeles pickup. Learn More

4" x 1-1/2" Hot Rolled Steel Rectangular Tube with a 0.065" wall, manufactured to ASTM A500 Grade B specifications. This structural grade tubing offers a minimum 46,000 PSI yield strength and excellent weldability, making it ideal for fabrication. Its high strength-to-weight ratio is perfect for trailer frames, structural supports, and machine bases. In stock for immediate Los Angeles pickup. Learn More

This 3/8 inch diameter Cold Rolled All Thread Rod is supplied in a 10 foot length with a zinc-plated finish for moderate corrosion resistance. Made from low-carbon steel, it meets the strength requirements of ASTM A307 Grade A, providing a typical tensile strength of 63,800 PSI. Its continuous threading makes it ideal for versatile fastening, anchoring, bracing, and support applications. In stock for Los Angeles pickup. Learn More