Search results for: 'Sheet+metal+22+ga'

24 Gauge Galvanized B-Deck sheet measuring 36" wide by 96" long. Produced from zinc-coated carbon steel conforming to ASTM A653, it provides excellent corrosion resistance and structural integrity. The 'B' profile is engineered for high strength-to-weight performance, making it ideal for roof decks, mezzanine floors, and structural siding applications. In stock for immediate Los Angeles pickup. Learn More

1 Inch Schedule 40 Hot Rolled Black Pipe, sold in 21-foot lengths. Manufactured to ASTM A53 Grade B standards, it offers 60,000 PSI tensile strength and excellent weldability. This medium-sized pipe is ideal for natural gas lines, fire sprinkler systems, scaffolding, and general structural fabrication. An economical choice for fluid conveyance and support applications. In stock for Los Angeles pickup. Learn More

This 10" x 1/8" x 1" abrasive cut-off wheel is engineered for high-speed metal cutting applications. Featuring fiberglass reinforcement for durability and safety, it is fully compliant with ANSI B7.1 standards. Designed for tools operating at or below a maximum speed of 6,100 RPM. Learn More

This 1-1/2" x 1-1/2" x 36" corner guard is fabricated from 16 gauge galvanized steel for excellent durability and impact resistance. The G90 zinc coating provides superior corrosion protection, making it ideal for industrial and commercial environments. Perfect for protecting walls, columns, and equipment. Learn More

This 5” x .040” cut-off wheel is engineered for high-speed cutting of metal. It is an ANSI B7.1 compliant abrasive wheel featuring durable fiberglass reinforcement for safety and performance. Rated for a maximum of 12,200 RPM, it delivers precise, clean cuts in fabrication and MRO applications. Learn More

The 1/8" Cobalt Drill Bit is engineered from M35 steel with 5% cobalt for superior heat resistance when drilling hard metals. Featuring a 135° split-point geometry for precision, it is ideal for stainless steel and cast iron applications compliant with ANSI/ASME B94.11M standards. Learn More

The 14 x 2” Hex Washer Self-Drill Screw is a high-performance fastener engineered to SAE J78 standards. It features a hardened steel point for drilling into metal without a pilot hole and a bonded neoprene washer for a weather-tight seal. The zinc plating, compliant with ASTM B633, provides excellent corrosion resistance for exterior applications. Learn More

This 7" x 1.6mm cut-off wheel features a 7/8" arbor hole, making it compatible with most standard angle grinders. Rated for a maximum speed of 8,500 RPM, this abrasive disc is engineered for fast, burr-free cutting of steel, stainless steel, and other ferrous metals. Its thin kerf design minimizes material waste and provides a clean finish. Ideal for fabrication and metalworking shops. In stock Los Angeles. Learn More

26 Gauge Galvanized Steel PBR Panel, measuring 36 inches wide by 288 inches (24 feet) long. Produced to ASTM A653 standards, this panel offers excellent corrosion resistance from its protective zinc coating. The PBR (Purlin Bearing Rib) profile provides structural strength, making it ideal for roofing, siding, and agricultural building applications where durability and weather resistance are required. In stock for Los Angeles pickup. Learn More

Durable 1-1/4" x 1-1/4" x 16GA Galvanized Slotted Angle for versatile framing and support applications. Made from commercial-grade, corrosion-resistant galvanized steel conforming to ASTM A653 standards, it is ideal for constructing custom shelving, racks, and braces. Pre-punched slots allow for easy bolt-together assembly. Learn More

26 Gauge Galvanized Steel PBR (Purlin Bearing Rib) panel, 36 inches wide by 192 inches (16 ft) long. Conforms to ASTM A653, offering excellent corrosion resistance from its protective zinc coating. Ideal for commercial roofing, agricultural siding, and residential projects, providing a durable, low-maintenance exterior. In stock for same-day pickup in Los Angeles. Learn More

This 14 x ¾" Hex Washer Self-Drilling Screw is designed for efficient metal-to-metal fastening. It complies with SAE J78 standards and features a zinc-plated finish per ASTM B633 for corrosion resistance. The integrated neoprene washer ensures a secure, weather-tight seal. Learn More

This 14 x 1-1/4" Hex Washer Self-Drill Screw is a self-drilling fastener designed for rapid metal-to-metal connections. Compliant with SAE J78 standards, it features a zinc-plated finish (ASTM B633) for corrosion resistance and an integrated neoprene washer for a weatherproof seal. Learn More

A 26 Gauge x 36" x 240" Galvanized PBR Panel, manufactured to ASTM A653 standards. Features a protective zinc coating applied via a hot-dip process for excellent corrosion and rust resistance. The underlying steel provides up to 80,000 PSI tensile strength. Ideal for residential roofing, commercial siding, and agricultural structures. In stock Los Angeles. Learn More

This 14 x 1-1/2" Hex Washer Self-Drill Screw is an industrial-grade fastener designed for efficient metal-to-metal connections. It features a zinc-plated finish per ASTM B633 for corrosion resistance and complies with SAE J78 standards. The integrated neoprene washer provides a weather-tight seal. Learn More

26 Gauge Galvanized PBR Steel Sheet, measuring 36 inches wide by 120 inches long. Conforming to ASTM A653, this panel features a protective zinc coating for excellent corrosion resistance. With a base steel yield strength of 36,000 PSI, it's ideal for roofing, siding, and agricultural structures. Its lightweight profile simplifies installation. In stock for Los Angeles pickup. Learn More

24 Gauge Galvanized Steel B-Deck measuring 36 inches wide by 120 inches long. This structural panel conforms to ASTM A653, providing excellent corrosion resistance from its protective zinc coating. With a high strength-to-weight ratio, it is an economical solution for roofing, siding, and floor decking systems. Ideal for residential, commercial, and agricultural construction. In stock for immediate Los Angeles pickup. Learn More

0.063" x 48" x 120" (4'x10') 3003-H14 Aluminum Diamond Plate. This lightweight, non-slip sheet conforms to ASTM B209 standards. It offers excellent corrosion resistance, formability, and weldability. The raised diamond pattern provides grip and rigidity, making this medium-thickness plate ideal for trailer flooring, wainscoting, wall guards, and toolboxes. In stock and available for same-day Los Angeles pickup. Learn More

Industrial Coating 218 is a high-performance alkyd and epoxy formulation designed for direct-to-metal (DTM) applications. This corrosion-resistant coating provides a durable finish for industrial MRO and fabrication projects, meeting key performance benchmarks. Learn More

Bobco's 217B is an industrial-grade, direct-to-metal (DTM) alkyd enamel designed for superior corrosion protection on steel and iron surfaces. This high-performance coating is ideal for demanding MRO and fabrication applications, providing a durable, weather-resistant finish. Learn More

This industrial-grade 7” x ¼” x ⅞” grinding disc is engineered for high-performance metal grinding. Compliant with ANSI B7.1 safety standards, it features durable aluminum oxide abrasive material and fiberglass reinforcement for reliability. Rated for a maximum speed of 8,500 RPM. Learn More

This 5” x 1/4” grinding disc is engineered for high-performance metal removal. Made from durable aluminum oxide with fiberglass reinforcement, it meets ANSI B7.1 safety standards and is rated for a maximum speed of 12,200 RPM. Learn More

Industrial Hardware Consumable 218 is a high-performance solution for MRO and fabrication. Formulated to meet key industrial performance standards like ASTM C557, this product ensures durability for demanding applications on metal surfaces. Ideal for corrosion protection and general maintenance tasks. Learn More

This 4-1/2" x .040" x 7/8" cut-off wheel is an industrial-grade abrasive engineered for high-speed cutting. It is ANSI B7.1 compliant and features fiberglass reinforcement for enhanced safety and durability during metal fabrication and MRO tasks. Learn More

Industrial Coating 227 is a professional-grade, direct-to-metal (DTM) alkyd paint designed for maximum adhesion and durability. This corrosion-resistant coating meets MIL-SPEC performance criteria and is ideal for protecting steel and iron surfaces in demanding industrial environments. Learn More

The C199XL is an industrial-grade ornamental cap rail fitting designed for durability and a precise fit. Engineered from high-quality metals for architectural applications, it is a key component for constructing robust, ADA-compliant handrail systems. Learn More

The 2-Way Hand Riveter is an industrial-grade tool for reliable fastening in fabrication and MRO. Constructed from high-strength steel alloy, it provides the leverage needed for setting aluminum and steel rivets. Includes multiple nose pieces for versatility. Learn More

This 12" x 7/64" Cut-Off Wheel is an industrial-grade abrasive tool compliant with ANSI B7.1 safety standards. Engineered with fiberglass reinforcement for a maximum speed of 5,100 RPM, it is designed for fast, clean cuts on various metals. The 1" arbor hole fits standard stationary cut-off machines. Learn More

High-performance 4-1/2” x 1/4” grinding disc designed for aggressive material removal. Compliant with ANSI B7.1 safety standards, this fiberglass-reinforced abrasive wheel operates at up to 13,300 RPM. Constructed from durable aluminum oxide for extended life in metal fabrication and MRO tasks. Learn More

High-performance 40-grit zirconia flap disc for aggressive material removal and finishing. Compliant with ANSI B7.1 safety standards, this 4.5" x 7/8" disc is engineered for grinding steel and other ferrous metals. Its durable zirconia abrasive ensures a long service life in demanding MRO and fabrication applications. Learn More

This 60 Grit Zirconia Flap Disc is a high-performance abrasive for rapid stock removal and finishing on steel and other metals. It is engineered with a durable zirconia alumina grain and complies with ANSI B7.1 safety standards. The Type 29 conical shape is ideal for aggressive grinding. Learn More

This industrial-grade construction adhesive is engineered for high-strength bonding in demanding applications. Compliant with ASTM C557 standards, it provides a reliable bond for a wide range of materials used in MRO and fabrication projects. Ideal for securing metal, wood, and composite surfaces. Learn More

High-performance 80 grit zirconia flap disc for rapid stock removal and finishing. Compliant with ANSI B7.1 safety standards, this 4-½” x ⅞” disc is rated for 13,300 RPM. Ideal for grinding and blending on steel and other ferrous metals. Learn More

High-performance 120 Grit Zirconia Flap Disc designed for finishing and blending applications. Compliant with ANSI B7.1 safety standards, this 4-1/2" x 7/8" disc provides a long-lasting, consistent cut on steel and other ferrous metals. Rated for a maximum speed of 13,300 RPM. Learn More

AWS A5.1 E6013 certified all-purpose welding rod for mild steel applications. This 3/32" diameter electrode provides a smooth, stable arc and easy slag removal, ideal for general fabrication and MRO. Designed for AC or DC operation in all positions. Learn More

This industrial-grade construction adhesive provides a high-strength bond for a wide range of materials. Formulated to meet ASTM C557 standards, it ensures reliable performance for demanding fabrication, construction, and MRO applications. Ideal for bonding wood, metal, concrete, and masonry. Learn More

This 4” x 1/16” x ⅜” cut-off wheel is an industrial-grade abrasive tool for high-speed cutting. Compliant with ANSI B7.1 safety standards, it features fiberglass reinforcement for enhanced durability and stability at its maximum 22,000 RPM rating. Learn More

The 1” x 3” Flower Welding Tab is a decorative and functional component for custom metal fabrication. Precision cut from 1/8” thick weldable mild steel, it provides a reliable mounting point for ornamental gates, fences, and furniture. Ideal for projects requiring both strength and aesthetic appeal. Learn More

The Super Tool Press Pliers 10" are engineered from high-strength forged alloy steel for superior gripping power and durability. Designed to meet ASME B107 standards, these industrial-grade pliers are essential for demanding fabrication and MRO tasks. Learn More

Protects steel surfaces with a high-purity, zinc-rich coating. This cold galvanized primer provides sacrificial, long-lasting corrosion resistance comparable to hot-dip galvanizing. The fast-drying formula is ideal for repairing damaged galvanized surfaces, protecting welds, and as a durable base coat for painting. In stock for immediate pickup in Los Angeles. Learn More

This 8 x ½ Pan Head Phillips Truss Screw is a versatile fastener made from low carbon steel. It features a zinc plating with CR3+ passivate compliant with ASTM B633 for reliable corrosion resistance. The wide truss head provides an excellent bearing surface for thin materials. Learn More

0.125" thick 3003 Aluminum Diamond Plate, available in 4' x 10' sheets. Conforms to ASTM B209, offering 22,000 PSI tensile strength, good workability, and excellent corrosion resistance. The raised diamond pattern provides a durable, non-slip surface. This medium-thickness plate is ideal for structural panels, vehicle running boards, and industrial catwalks. In stock for immediate Los Angeles pickup. Learn More

1/4" Hot Rolled Diamond Plate (Tread Plate) made from A36 structural steel. This sheet measures 48" x 120" and conforms to ASTM A786 and A36 standards. It features a raised pattern for maximum skid resistance, excellent weldability, and a minimum tensile strength of 58,000 PSI. Ideal for industrial flooring, ramps, and truck beds. In stock Los Angeles. Learn More

This 1/8" 6013 All-Purpose Welding Rod is an AWS/ASME certified electrode designed for versatile performance. Ideal for general fabrication and repair on mild steel, it offers a stable arc and easy slag removal. Packaged in a convenient 10 LB container for MRO and project use. Learn More

3/16" thick Hot Rolled Diamond Plate, available in 4' x 10' sheets. Produced from A36 structural steel and conforming to ASTM A786 standards for pattern, this plate provides maximum skid resistance. With a tensile strength of 58,000 PSI and excellent weldability, it is ideal for industrial flooring, ramps, truck beds, and stair treads. In stock for Los Angeles pickup. Learn More

1/8" thick Hot Rolled Steel Diamond Plate, available in 48" x 120" sheets. Made from durable A36 steel and conforming to ASTM A786 for pattern and skid resistance. This plate offers excellent weldability and strength, making it ideal for high-traffic applications like industrial flooring, ramps, stair treads, and truck bed liners. Its raised pattern provides multi-directional grip. In stock for Los Angeles pickup. Learn More

This industrial-grade 0.8mm (.030") flux core welding wire is engineered for high-performance fabrication and repair. Meeting AWS/ASME certification standards, it provides a stable arc and excellent bead appearance for general-purpose steel welding. Packaged in a convenient 11 lbs (1kg) spool. Learn More

This Galvanized Slotted Angle features a durable 16-gauge steel construction with a corrosion-resistant galvanized finish conforming to ASTM standards. Ideal for versatile industrial framing, shelving, and general MRO applications where a strong, bolt-together system is required. Learn More

1/2" NPS Schedule 40 Stainless Steel Pipe, 240" length. This 304 stainless steel pipe conforms to ASTM A312 and has a tensile strength of 73,200 PSI. It combines excellent corrosion resistance and weldability, making it a standard for fluid and gas transport. The small diameter is ideal for instrumentation lines, conduit, and small-scale process piping. In stock for Los Angeles pickup. Learn More

A 16 gauge galvanized steel corner guard providing robust impact and abrasion resistance for walls and edges. Manufactured to meet ASTM A653 standards for corrosion protection, this 2-1/2" x 2-1/2" x 36" guard is ideal for high-traffic commercial and industrial environments. The G90 galvanized finish ensures long-lasting durability. Learn More

Protect high-traffic areas with our Galvanized Corner Guard. Made from durable 16 gauge steel with a G90 galvanized coating for superior corrosion resistance, conforming to ASTM A653 standards. Ideal for industrial, commercial, and MRO applications requiring robust wall and corner protection. Learn More

This industrial-grade 0.9mm (.035") MIG wire is AWS/ASME certified for consistent and reliable welds. Ideal for a wide range of steel fabrication and repair applications, it ensures strong performance and smooth feeding. Available in 33 LBS spools for production environments. Learn More

The 1-1/2 Inch Post Ball Cap is a high-quality ornamental hardware component designed for fencing and architectural applications. Fabricated from durable Class 25-30 gray iron or A356 aluminum, it provides a classic, finished look to any metal post. This decorative cap is engineered for a precise fit on 1-1/2 inch square or round tubing. Learn More

3/4" NPS Schedule 40 pipe in 304 stainless steel. This pipe conforms to ASTM A312 and provides excellent corrosion resistance and weldability for demanding applications. With a tensile strength of 73,200 PSI, it is a reliable choice for fluid and gas transport in food processing, chemical plants, and water treatment systems. Ideal for instrumentation lines and small-scale process piping. In stock Los Angeles. Learn More

The Eagle-1000 FR is a robust 1/2 HP slide gate operator designed for residential and light commercial applications. It handles gates up to 27 feet and 600 lbs with a continuous duty motor. This complete kit includes two remotes, a receiver, and a photo eye safety monitor for a secure and convenient access control solution. In stock for same-day pickup in Los Angeles. Learn More

The 1 Sq Pressed Steel Cap is a durable, weldable finishing component for 1-inch square tubing. Made from low-carbon mild steel, it provides a clean, protective end for fence posts, railings, and metal furniture. Designed for easy integration in fabrication projects. Learn More

This industrial-grade construction adhesive provides a high-strength bond for a wide range of materials. Compliant with ASTM C557 standards, it is engineered for reliability in demanding construction, fabrication, and MRO applications. Learn More

This 11-inch Face Clamp is a versatile tool for woodworking, welding, and general fabrication. Its large jaw capacity and 2-inch reach provide strong, flush clamping for pocket-hole joinery, butt joints, and assembly tasks. The durable steel construction ensures rigidity and long service life for professional and DIY projects. In stock for same-day pickup in Los Angeles. Learn More

14 Gauge Hot Rolled Diamond Plate, 48" x 120". Conforms to ASTM A786 (pattern) on an A36 steel base. This plate offers 58,000 PSI tensile strength, excellent weldability, and a durable, slip-resistant surface. Ideal for industrial flooring, ramps, truck beds, and stair treads where safety and durability are critical. In stock for same-day Los Angeles pickup. Learn More

0.188" x 48" x 120" 3003-H14 Aluminum Plate. Meets ASTM B209 specifications. This non-heat-treatable alloy offers excellent weldability, superior corrosion resistance, and good workability. With a tensile strength of 22,000 PSI, its medium thickness is ideal for structural panels, machine guards, chemical equipment, and general fabrication projects. In stock for same-day Los Angeles pickup. Learn More

The Bobco Mini Portable Welding Machine is a versatile dual-voltage (110V/220V) unit designed for stick welding. It is compatible with AWS-certified electrodes from 1/16" to 1/8" in diameter, delivering reliable performance for light fabrication, repair, and MRO tasks. Learn More

This 1/8" 6013 All-Purpose Welding Rod is an AWS/ASME certified electrode designed for versatile performance. With a 60,000 psi tensile strength, its mild steel core and flux coating ensure a stable arc and easy slag removal, making it ideal for general fabrication and repair. Learn More

These superior performance work gloves feature a durable nitrile coating for enhanced grip and protection. Rated to ANSI/ISEA 105 standards, they are designed for demanding industrial applications, providing both dexterity and durability for material handling and assembly. Learn More

This 3/32" 6013 all-purpose welding rod is an AWS/ASME certified electrode ideal for general fabrication. Designed for a stable arc on AC/DC, it delivers smooth beads on mild steel. A versatile choice for MRO and light structural work. Learn More

A professional-grade construction adhesive meeting ASTM C557 standards for strong, reliable bonds. This high-performance adhesive is ideal for bonding a wide range of materials in construction, fabrication, and MRO projects. Formulated for superior adhesion and durability. Learn More

This industrial-grade construction adhesive is engineered for high-strength bonding on a variety of substrates. Compliant with ASTM C557 standards, it provides a durable, reliable bond for MRO, fabrication, and construction projects. Ideal for securing panels, framing, and other materials where a permanent hold is critical. Learn More

Galvanized Slotted Angle is a versatile framing material made from durable 16 gauge steel. Featuring a corrosion-resistant galvanized finish meeting ASTM A653 standards, it's ideal for constructing custom racks, supports, and maintenance frames. The pre-punched slotted pattern allows for easy, bolt-together assembly. Learn More

This industrial-grade Galvanized Corner Guard is manufactured from 16 gauge steel for high-impact wall and corner protection. It features a G90 hot-dip galvanized coating compliant with ASTM A653 for excellent corrosion resistance in commercial and MRO applications. Learn More

1" x 1" Galvanized Steel Square Tube with a 16 gauge wall, sold in a 24-foot length. Conforming to ASTM A500 Grade B, this structural tubing provides a minimum yield strength of 46,000 PSI. The hot-dip galvanized zinc coating delivers excellent corrosion and rust resistance, making it ideal for outdoor frames, trailers, and gates. In stock for Los Angeles pickup. Learn More

1-1/2 inch Nominal Pipe Size (NPS) Hot Rolled Black Pipe with a Schedule 40 wall thickness. Made from carbon steel conforming to ASTM A53 Grade B specifications, this pipe offers a minimum tensile strength of 60,000 PSI and excellent weldability. Its medium size is well-suited for plumbing mains, structural posts, handrails, and fire protection systems. In stock for immediate Los Angeles pickup. Learn More

Protect your hands with our industrial-grade Goat Leather Driving Gloves. These gloves are rated to ANSI/ISEA 105 standards, providing excellent dexterity and durability for material handling. The premium goat leather construction ensures a comfortable fit and reliable protection for MRO and fabrication tasks. Learn More

Forney 1/8" (3.2mm) Aluminum Welding Electrode designed for reliable fabrication and repair. This AWS-compliant consumable ensures consistent, high-quality welds on various aluminum alloys. Ideal for professional MRO and fabrication projects. Learn More

0.25" x 48" x 120" 3003 Aluminum Diamond Plate. Conforms to ASTM B209, offering 22,000 PSI tensile strength, good workability, and excellent corrosion resistance. The raised diamond pattern provides a durable, non-slip surface. This medium thickness plate is ideal for structural panels, machine guards, vehicle body panels, and high-traffic flooring. In stock for same-day Los Angeles pickup. Learn More

This Heavy Duty Regal Cutter Set includes two robust utility cutters (2-1/2" and 3-7/8") designed for demanding tasks in any workshop or job site. Featuring durable construction and sharp, reliable blades, this set is perfect for cutting a variety of materials with precision and control. An essential tool for fabricators, shippers, and installers. In stock for Los Angeles pickup. Learn More

4" NPS Schedule 40 304 Stainless Steel Pipe, 240" length. Conforming to ASTM A312, this pipe offers 73,200 PSI tensile strength, excellent weldability, and superior corrosion resistance. Its large diameter is ideal for main water lines, industrial process piping, and structural columns where high flow rates and durability are required. In stock for immediate pickup in Los Angeles. Learn More

3/8" x 48" x 120" Hot Rolled Diamond Plate, made from A36 structural steel and conforming to ASTM A786 standards. This heavy-duty plate offers 58,000-80,000 PSI tensile strength and a raised pattern for maximum skid resistance. Its substantial thickness makes it ideal for industrial flooring, heavy equipment ramps, trench covers, and structural walkways. In stock for same-day Los Angeles pickup. Learn More

1/2" x 48" x 120" Hot Rolled Diamond Plate, made from A36 steel. Conforms to ASTM A786 standards and features a raised pattern for maximum skid resistance. With a tensile strength of 58,000-80,000 PSI, this heavy-duty plate is ideal for industrial flooring, loading ramps, and heavy equipment base plates. In stock for same-day Los Angeles pickup. Learn More

1" NPS Schedule 40 pipe manufactured from 304 stainless steel, supplied in a 240" (20 ft) length. Conforming to ASTM A312, it provides excellent weldability and corrosion resistance with a tensile strength of 73,200 PSI. This versatile size is ideal for fluid transport, industrial plumbing, and structural applications like handrails and support posts. In stock for Los Angeles pickup. Learn More

304 Stainless Steel Pipe, 3" Nominal Pipe Size (NPS) with a Schedule 40 wall, in a 240" length. Conforming to ASTM A312, this pipe offers excellent corrosion resistance and weldability. Its 73,200 PSI tensile strength makes it ideal for main water lines, industrial process piping, and structural columns. In stock for immediate Los Angeles pickup. Learn More

2" x 2" Galvanized Steel Square Tube with a 16 gauge wall, 24-foot length. Conforms to ASTM A500 Grade B with 58,000 PSI tensile strength. The hot-dip galvanized zinc coating provides excellent corrosion resistance for outdoor applications. This medium-sized tube is ideal for fabricating trailer frames, gate frames, and structural supports. In stock for Los Angeles pickup. Learn More

2 inch Schedule 40 Hot Rolled Black Pipe. Conforms to ASTM A53 Grade B standards, offering 60,000 PSI tensile strength and excellent weldability for strong, reliable joints. This medium-sized pipe is ideal for plumbing mains, HVAC piping, fire sprinkler systems, and structural applications like handrails and support posts. In stock and ready for same-day pickup in Los Angeles. Learn More

5" Nominal Pipe Size (NPS) Hot Rolled Black Pipe with a Schedule 40 wall. This A53 Grade B steel pipe offers a minimum tensile strength of 60,000 PSI and excellent weldability. Its large diameter and robust wall thickness make it ideal for high-flow fluid transfer, main water lines, industrial process piping, and heavy-duty structural columns. In stock for Los Angeles pickup. Learn More

6" Nominal Pipe Size (NPS) Hot Rolled Black Pipe with a Schedule 40 wall (0.280"). Manufactured to meet ASTM A53 Grade B standards, this pipe provides a minimum tensile strength of 60,000 PSI and excellent weldability. Its large diameter is ideal for industrial process piping, structural columns, and main water lines. In stock for Los Angeles pickup. Learn More

3/4" x 16GA Hot Rolled Steel Square Tube, 240" length. Conforms to ASTM A500 Grade B with 58,000 PSI tensile strength and excellent weldability. Ideal for lightweight structural applications like frames, supports, and general fabrication. Its small profile is suited for gate frames, equipment guards, and bracing. In stock for Los Angeles pickup. Learn More

1-1/4" NPS Schedule 40 pipe manufactured from 304 stainless steel. Conforming to ASTM A312, it provides excellent corrosion resistance, high weldability, and 73,200 PSI tensile strength. This versatile pipe is an industry standard for fluid transport in food processing and chemical plants, as well as for architectural and structural applications. In stock for Los Angeles pickup. Learn More

1-1/2" nominal pipe size (NPS) 304 Stainless Steel Pipe, Schedule 40 x 20' length. Conforms to ASTM A312, offering excellent corrosion resistance and 73,200 PSI tensile strength. This medium-sized pipe is ideal for plumbing mains, process piping, and structural posts where durability and reliability are essential. In stock for same-day cutting and pickup in Los Angeles. Learn More

2" NPS Schedule 40 pipe in 304 Stainless Steel, supplied in 20-foot (240") lengths. Conforming to ASTM A312, this pipe delivers 73,200 PSI tensile strength and excellent corrosion resistance for fluid transport and structural systems. Its versatile properties make it a standard for sanitary applications, process piping, and architectural use. In stock for immediate Los Angeles pickup. Learn More

5" NPS Schedule 40, 304 Stainless Steel Pipe, sold in 20-foot (240") lengths. Conforms to ASTM A312, offering excellent corrosion resistance and weldability with a tensile strength of 73,200 PSI. The large 5" nominal pipe size makes it ideal for main water lines, industrial process piping, and structural columns in corrosive environments. In stock for immediate pickup in Los Angeles. Learn More

3/4" x 16 gauge Galvanized Square Tube, 24' length. Conforms to ASTM A500 Grade B with a 58,000 PSI tensile strength. The hot-dip zinc coating provides excellent corrosion resistance for outdoor applications. This small-profile tube is ideal for lightweight frames, gates, railings, and agricultural structures. In stock for immediate pickup in Los Angeles. Learn More

1-1/4" x 1-1/4" Galvanized Square Tube with a 16 gauge wall, sold in 24-foot lengths. Manufactured to ASTM A500 Grade B standards, this structural tubing has a 58,000 PSI tensile strength. The hot-dip galvanized zinc coating provides excellent corrosion resistance for outdoor applications. Ideal for structural frames, gates, trailer construction, and railings. In stock for Los Angeles pickup. Learn More

A 2" x 11 gauge Galvanized Square Tube, available in 24-foot lengths. Manufactured from ASTM A500 Grade B steel, this tube provides a minimum yield strength of 46,000 PSI for structural applications. The hot-dip galvanized zinc coating delivers superior corrosion resistance for outdoor use. Ideal for trailer frames, gates, handrails, and structural supports. In stock in Los Angeles. Learn More

1-1/4 inch Nominal Pipe Size (NPS), Schedule 40 Hot Rolled Black Pipe in a 21 ft length. Manufactured to ASTM A53 Grade B standards, this carbon steel pipe offers 60,000 PSI tensile strength and excellent weldability. The medium diameter is ideal for plumbing mains, fire sprinkler systems, and structural applications. In stock for Los Angeles pickup. Learn More

2-1/2" NPS Schedule 40 Hot Rolled Black Pipe, 21 ft length. Manufactured to ASTM A53 Grade B with 60,000 PSI tensile strength. This large-diameter pipe offers excellent weldability for plumbing, fire protection systems, and structural applications. Its thicker wall provides high-pressure ratings and structural integrity for main water lines, industrial process piping, and support columns. In stock for Los Angeles pickup. Learn More

3" Nominal Pipe Size (NPS) Hot Rolled Black Pipe with a Schedule 40 wall. Conforming to ASTM A53 Grade B, this carbon steel pipe offers 60,000 PSI tensile strength and excellent weldability for fabrication. Its large diameter is suited for main fluid lines, industrial process piping, and structural applications like columns and heavy supports. In stock for Los Angeles pickup. Learn More

2 Inch Schedule 10 304 Stainless Steel Pipe, 20' length. Conforms to ASTM A312, offering 73,200 PSI tensile strength, excellent weldability, and superior corrosion resistance. This medium-diameter pipe is ideal for fluid transport in food processing, chemical plants, HVAC systems, and for structural applications like handrails and support posts. In stock for immediate Los Angeles pickup. Learn More

2-1/2" NPS Schedule 40, 304 Stainless Steel Pipe, supplied in a 240-inch length. Conforming to ASTM A312, this pipe provides 73,200 PSI tensile strength and excellent corrosion resistance. Its weldability and sanitary properties make it a top choice for fluid transport. This large diameter pipe is ideal for main water lines, industrial process piping, and structural columns. In stock for immediate Los Angeles pickup. Learn More

2-3/8 inch Outer Diameter Galvanized Steel Fence Post with a 16 gauge wall, sold in 288-inch (24 ft) lengths. Conforming to ASTM A500 Grade B, this post provides 58,000 PSI tensile strength and excellent corrosion resistance from its hot-dip zinc coating. Its medium diameter is ideal for the structural framework of residential and commercial chain-link fences. In stock for Los Angeles pickup. Learn More

3-1/2 inch Nominal Pipe Size (NPS), Schedule 40 Hot Rolled Black Pipe in a 252" (21 ft) length. This product conforms to ASTM A53 Grade B, offering 60,000 PSI tensile strength and excellent weldability. As a large diameter pipe, it is ideal for main water lines, industrial process piping, structural columns, and large-scale fabrication projects. In stock and available for same-day pickup in Los Angeles. Learn More

The Bobco Welding Machine MMA 160 is a portable, high-performance stick welder designed for industrial use. It delivers a stable 160-amp arc, ideal for use with AWS/ASME certified electrodes like 6010, 6013, and 7018. Its durable construction ensures reliability for both fabrication and MRO projects. Learn More

This 1/4" x 4-1/4" Cobalt Industrial Drill Bit is engineered from M35 steel with 5% cobalt for superior heat resistance. Conforming to ANSI/ASME B94.11M standards, its 135° split-point tip ensures precise starts and is ideal for drilling into stainless steel and cast iron. Learn More