Search results for: 'sized gate parts'

4" x 1/4" Cold Rolled Flat Bar, 144" length, made from 1018 low-carbon steel. Conforms to ASTM A108 standards, offering 63,800 PSI tensile strength, tight dimensional tolerances, and a smooth, scale-free finish. Its excellent machinability and weldability make it a reliable choice. The large width is ideal for base plates, heavy structural components, and machine frames. In stock for same-day Los Angeles pickup. Learn More

4" x 3/8" 1018 Cold Rolled Steel Flat Bar in a 144" length. This bar meets ASTM A108 standards, providing 63,800 PSI tensile strength, a smooth scale-free finish, and tight dimensional tolerances. Its large width makes it ideal for base plates, heavy structural bracing, and die components where precision and strength are required. In stock and available for same-day pickup in Los Angeles. Learn More

This 6 inch by 3/8 inch 1018 Cold Rolled Steel Flat Bar offers tight dimensional tolerances and a smooth, scale-free surface. Conforming to ASTM A108, it has a tensile strength of 63,800 PSI and excellent machinability. Its large width makes it ideal for base plates, structural gussets, and heavy equipment mounting. In stock for Los Angeles pickup. Learn More

3" x 5/8" 1018 Cold Rolled Steel Flat Bar, 144" length. Conforms to ASTM A108 with 63,800 PSI tensile strength, excellent machinability, and superior dimensional tolerances. Its smooth, scale-free surface is ideal for painting or plating. This medium-width bar is used for structural bracing, machine ways, and base plates. In stock for same-day Los Angeles pickup. Learn More

1/8" diameter 1018 Cold Rolled Steel Round Bar, 144" length. Conforms to ASTM A108 with a tensile strength of 63,800 PSI. The cold drawn process provides a smooth, scale-free finish and tight dimensional tolerances. This small diameter is ideal for manufacturing precision pins, dowels, fastener blanks, and small shafts. In stock for Los Angeles pickup. Learn More

7/8 inch diameter 1018 Cold Rolled Round Bar, sold in 144-inch lengths. Conforms to ASTM A108 with 63,800 PSI tensile strength and excellent machinability. The cold drawn process provides a smooth finish and tight dimensional tolerances. This medium-diameter bar is ideal for shafts, axles, pins, and general-purpose machined components. In stock for Los Angeles pickup. Learn More

12 Gauge (48" x 120") Cold Rolled Steel Sheet, typically 1018 grade. Conforms to ASTM A1008 specifications and provides a tensile strength of 63,800 PSI. The cold reduction process creates a smooth, clean surface finish and tight dimensional tolerances, making it ideal for forming and welding. Excellent for automotive panels, appliance casings, and equipment enclosures. In stock for Los Angeles pickup. Learn More

16 gauge Cold Rolled Steel Sheet (48" x 120"), typically 1018 grade. Features 63,800 PSI tensile strength, excellent formability, and a smooth, clean surface that is ideal for painting and finishing. This thin gauge sheet is perfect for automotive panels, appliance casings, custom brackets, and enclosures. In stock for same-day Los Angeles pickup. Learn More

22 Gauge (0.0299") Cold Rolled Steel Sheet, measuring 48" x 120". Typically produced from 1018 steel, this sheet offers a smooth, scale-free surface, superior dimensional tolerance, and excellent formability. Its thin gauge is perfect for automotive panels, appliance casings, electronic enclosures, and other applications requiring a paint-ready finish. In stock for same-day Los Angeles pickup. Learn More

This 1-1/2" x 2-1/2" Large Welding Tab is precision-cut from 1/8" thick, high-quality weldable low-carbon steel. Designed with a 3/8" hole for versatile mounting, it meets AWS D1.1 structural welding standards for reliable fabrication. Learn More

Durable 1-1/2 inch square plastic cap designed for a secure fit on square tubing. Made from high-quality, weather-resistant Low-Density Polyethylene (LDPE), this cap provides a clean, finished appearance and protects against debris. Learn More

This 1-¼" x 3-¼" L-Clip Welding Tab is a high-quality fabrication component made from durable, weldable mild steel. Designed for structural connections and reinforcement, it conforms to AWS welding practices for strength and reliability. Ideal for creating strong, permanent weld points in MRO and new construction projects. Learn More

1" x 3/8" 1018 Cold Rolled Steel Flat Bar, 144" length. Conforms to ASTM A108 with 63,800 PSI tensile strength and excellent machinability. The cold drawing process provides a smooth, scale-free surface and tight dimensional tolerances. Ideal for base plates, mounting brackets, and machine components requiring precision without extensive finishing. In stock for Los Angeles pickup. Learn More

2" x 1/2" 304 Stainless Steel Flat Bar, 144" length. This versatile bar conforms to ASTM A276 and offers an excellent combination of strength, with 73,200 PSI tensile, and corrosion resistance. Its medium profile is ideal for structural bracing, machine ways, supports, and general fabrication. Excellent weldability and formability allow for complex designs. In stock for same-day Los Angeles pickup. Learn More

3/8" x 3/8" 304 Stainless Steel Square Bar, 144" length. Conforms to ASTM A276, providing excellent corrosion resistance and weldability with 73,200 PSI tensile strength. This austenitic, non-magnetic grade is a versatile choice for general fabrication, ideal for creating brackets, braces, and supports for industrial and architectural applications. In stock for Los Angeles pickup. Learn More

This 1" x 3/4" 6061-T6 Aluminum Flat Bar offers an excellent strength-to-weight ratio and good workability. Conforming to ASTM B211, it provides 45,000 PSI tensile strength, superior corrosion resistance, and excellent weldability. This medium-width bar is ideal for structural bracing, machine ways, support brackets, and general fabrication projects. In stock and available for same-day pickup in Los Angeles. Learn More

18 Gauge (0.0478") 1018 Cold Rolled Steel Sheet, 48" wide by 120" long. This material offers a smooth, scale-free surface, superior dimensional tolerance, and excellent formability for bending and stamping. With good weldability and 63,800 PSI tensile strength, it is a versatile choice for applications requiring a precise, paint-ready surface, such as electronic enclosures and automotive panels. In stock for Los Angeles pickup. Learn More

4" x 1/8" 304 Stainless Steel Flat Bar, 144" length. Conforming to ASTM A276, this austenitic grade offers 73,200 PSI tensile strength and excellent corrosion resistance. Its strength and superior weldability make it a top choice for fabrication. This large width is ideal for base plates, heavy structural supports, and die components. In stock for Los Angeles pickup. Learn More

5/8" diameter 304 Stainless Steel Round Bar, sold in 144" lengths. Certified to ASTM A276, this versatile austenitic steel features 73,200 PSI tensile strength, excellent corrosion resistance, and superior weldability. Its medium diameter is ideal for general-purpose shafts, axles, bushings, and architectural applications requiring strength and durability. In stock for Los Angeles pickup. Learn More

3/16" x 3/4" Cold Rolled 1018 Steel Flat Bar, 144" length. Conforming to ASTM A108, this bar has a clean, scale-free surface, tight dimensional tolerances, and 63,800 PSI tensile strength. Its excellent machinability and good weldability make it a versatile choice for fabricating custom brackets, straps, and base plates. In stock Los Angeles. Learn More

Our 6-inch rubber roller is an industrial-grade component designed for durability and smooth operation. Constructed from high-traction rubber on a robust core, it is ideal for material handling systems and heavy-duty MRO applications. Learn More

Protect your hands with our industrial-grade Goat Leather Driving Gloves. These gloves are rated to ANSI/ISEA 105 standards, providing excellent dexterity and durability for material handling. The premium goat leather construction ensures a comfortable fit and reliable protection for MRO and fabrication tasks. Learn More

Industrial Caster 251 is a heavy-duty mobility solution designed for demanding environments. Featuring an industrial-grade build with certified load ratings from 200-2000 lbs, it provides reliable movement for equipment, carts, and workbenches. Learn More

Our 3-Inch Rubber Roller is an industrial-grade component designed for material handling and fabrication. Features a durable, high-traction rubber surface on a steel core, engineered for consistent performance in MRO and production environments. Learn More

This industrial-grade construction adhesive is engineered for high-strength bonding on a variety of substrates. Compliant with ASTM C557 standards, it provides a durable, reliable bond for MRO, fabrication, and construction projects. Ideal for securing panels, framing, and other materials where a permanent hold is critical. Learn More

High-strength construction adhesive compliant with ASTM C557 standards. This industrial-grade formula provides a durable, reliable bond for a wide range of materials in fabrication and MRO projects. Learn More

3/8" x 2-1/2" 304 Stainless Steel Flat Bar, 144" length. Conforms to ASTM A276, this versatile bar offers 73,200 PSI tensile strength and excellent corrosion resistance. Its austenitic structure provides superior weldability and ductility. This medium-width bar is ideal for structural bracing, machine ways, food processing equipment framework, and architectural trim. In stock for immediate Los Angeles pickup. Learn More

This industrial-grade 0.9mm (.035) MIG welding wire is engineered for high-performance fabrication and repair. Certified to meet AWS/ASME standards, it provides a stable arc and minimal spatter for clean, strong welds on various steel types. Available in an 11 LBS (1KG) spool. Learn More

This industrial-grade construction adhesive provides a high-strength bond for a wide range of materials. Formulated to meet ASTM C557 standards, it ensures reliable performance for demanding fabrication, construction, and MRO applications. Ideal for bonding wood, metal, concrete, and masonry. Learn More

Forney 1/8" (3.2mm) Aluminum Welding Electrode designed for reliable fabrication and repair. This AWS-compliant consumable ensures consistent, high-quality welds on various aluminum alloys. Ideal for professional MRO and fabrication projects. Learn More

This industrial utility block is a versatile hardware component for MRO and fabrication. Made from durable, general-purpose low-carbon steel, it serves as a reliable spacer, shim, or mounting base. Its precise dimensions ensure stability in various industrial applications. Learn More

This 4" x 4" Heavy Duty Square Steel Base Plate is a robust mounting solution for structural applications. Made from industrial-grade flat steel and pre-drilled with holes for easy anchoring, it provides a stable foundation for posts, columns, and machinery. Ideal for fabrication and construction projects requiring a durable mounting point. Learn More

This 3/4 Inch Square Plastic Cap is designed for a secure fit on square tubing, providing a clean finish and protection. Made from durable, weather-resistant LDPE plastic, it is ideal for finishing fences, railings, and furniture. It meets general industrial quality standards for non-structural applications. Learn More

These 10" off-white gloves are crafted from soft, durable goat leather for excellent dexterity and tactile sensitivity. They are ANSI/ISEA 105 rated, making them ideal for general handling, assembly, and MRO tasks requiring reliable hand protection. Learn More

High-performance 4-1/2” x 1/4” grinding disc designed for aggressive material removal. Compliant with ANSI B7.1 safety standards, this fiberglass-reinforced abrasive wheel operates at up to 13,300 RPM. Constructed from durable aluminum oxide for extended life in metal fabrication and MRO tasks. Learn More

This 10" x 1/8" x 1" abrasive cut-off wheel is engineered for high-speed metal cutting applications. Featuring fiberglass reinforcement for durability and safety, it is fully compliant with ANSI B7.1 standards. Designed for tools operating at or below a maximum speed of 6,100 RPM. Learn More

The 1/8" Cobalt Drill Bit is engineered from M35 steel with 5% cobalt for superior heat resistance when drilling hard metals. Featuring a 135° split-point geometry for precision, it is ideal for stainless steel and cast iron applications compliant with ANSI/ASME B94.11M standards. Learn More

The 1/4" Cobalt Drill Bit is engineered from M35 steel with 5% cobalt for exceptional heat resistance up to 1100°F. Its 135° split-point geometry ensures precise, walk-free starts and efficient drilling in hard materials like stainless steel and cast iron. Learn More

Our Galvanized Slotted Angle is a versatile steel framing component for general construction and MRO projects. Made from 16 gauge galvanized steel for superior corrosion resistance, this 1-1/2" x 1-1/2" angle provides reliable support for shelving, bracing, and custom frameworks that meet industrial manufacturing standards. Learn More

This 5” x 1/4” grinding disc is engineered for high-performance metal removal. Made from durable aluminum oxide with fiberglass reinforcement, it meets ANSI B7.1 safety standards and is rated for a maximum speed of 12,200 RPM. Learn More

This industrial-grade 0.8mm (.030") MIG welding wire is supplied on 33 LBS spools. Manufactured to meet or exceed AWS/ASME certification standards, it ensures consistent performance for professional fabrication and repair on mild and low-alloy steels. Learn More

This 4-1/2" x .040" x 7/8" cut-off wheel is an industrial-grade abrasive engineered for high-speed cutting. It is ANSI B7.1 compliant and features fiberglass reinforcement for enhanced safety and durability during metal fabrication and MRO tasks. Learn More

The Bobco Auto-Darkening Welding Helmet offers superior protection, meeting ANSI/ISEA Z87.1+ safety standards. Featuring a 3.67” x 1.70” viewing area and a lightweight 1.07lb polycarbonate body, it ensures comfort and clarity for professional fabrication and MRO tasks. Learn More

This high-performance 0.8mm (.030") MIG welding wire is engineered for superior results in fabrication and repair. AWS/ASME certified, it ensures strong, consistent welds on mild and carbon steels. Packaged in convenient 11 LBS (1KG) spools for project efficiency. Learn More

This Safety Yellow industrial coating features advanced Direct-to-Metal (DTM) oil-based alkyd technology for superior adhesion and corrosion protection. It provides a durable, high-visibility finish ideal for MRO and equipment applications, meeting industrial performance benchmarks. Learn More

This industrial-grade 0.8mm (.030") MIG welding wire is AWS/ASME certified for professional use. The steel alloy composition ensures a stable arc, low spatter, and consistent wire feed for high-quality welds in fabrication and repair applications. Packaged in a convenient 2.2 LBS (1 KG) spool. Learn More

Our L-Clip Welding Tab is an essential component for professional fabrication. Made from high-quality, weldable low-carbon steel, this 1-1/2 x 1-1/2 tab ensures clean weld starts and strong temporary connections, designed for use in processes compliant with AWS/ASME standards. Learn More

The Bobco Auto Darkening Weld Helmet provides superior protection, meeting ANSI/ISEA Z87.1+ standards for impact resistance. It features a large 3.94” x 3.15” viewing area for maximum visibility and is constructed from a lightweight, durable high-impact resistant material. Learn More

Size 12 rubber boots with a 16" height for maximum protection. Designed for industrial and construction environments, these boots feature a waterproof, seamless construction and a slip-resistant tread for safety on wet surfaces. Durable and flexible for all-day comfort. In stock for immediate pickup at our Los Angeles location. Learn More

Size 9 industrial-grade rubber rain boots featuring a 16-inch height for superior protection in wet and muddy conditions. Built with a 100% waterproof, seamless construction and a slip-resistant lug outsole for secure traction on demanding job sites. Ideal for construction, landscaping, and general maintenance work. In stock for Los Angeles pickup. Learn More

Size 11 rubber work boots with a 16-inch height, providing substantial waterproof protection for demanding job sites. Designed for durability and comfort in wet conditions, these boots are essential safety gear for construction, landscaping, and industrial applications. Keep your feet dry and protected with this reliable footwear, in stock for pickup in Los Angeles. Learn More

4 inch Nominal Pipe Size (NPS) Hot Rolled Black Pipe, Schedule 40 wall thickness, 252 inch length. Conforms to ASTM A53 Grade B with 60,000 PSI tensile strength. This large diameter pipe is ideal for main water lines, industrial process piping, and structural columns. Excellent weldability for easy fabrication. In stock for Los Angeles pickup. Learn More

1/2" x 1-1/2" 304 Stainless Steel Flat Bar, 144" long. This versatile austenitic grade conforms to ASTM A276, delivering a balance of strength, excellent corrosion resistance, and superior weldability. Its medium size is ideal for structural bracing, equipment framework, machine ways, and architectural supports. In stock for immediate Los Angeles pickup. Learn More

A36 Hot Rolled Steel Flat Bar, 3 inches wide by 3/8 inch thick. Conforms to ASTM A36 standards with a minimum yield strength of 36,000 PSI and excellent weldability for easy fabrication. Its medium size is ideal for structural braces, equipment mounts, base plates, and general repairs. In stock for Los Angeles pickup. Learn More

This 1-1/4" x 1-1/4" x 1/4" Type 304 Stainless Steel Angle conforms to ASTM A276. It provides a tensile strength of 73,200 PSI, excellent corrosion resistance, and superior weldability. Its small leg size makes it ideal for light structural supports, brackets, corner guards, and architectural trim. In stock Los Angeles. Learn More

Size 9-1/2 industrial rubber boots with a 16" height for maximum coverage. Built for demanding job site conditions, these waterproof boots offer reliable protection against water, mud, and debris. The durable rubber construction and treaded, slip-resistant sole provide safety and comfort for fabricators, construction workers, and maintenance personnel. In stock for Los Angeles pickup. Learn More

Grade 60 Hot Rolled Rebar, #8 size (1" diameter) in a 20-foot length. Conforming to ASTM A615, this reinforcing bar provides a minimum yield strength of 60,000 PSI for structural concrete applications. Its deformed surface ensures a strong mechanical bond, making it essential for reinforcing foundations, slabs, columns, and retaining walls. In stock for Los Angeles pickup. Learn More

2" Nominal Pipe Size (NPS) Galvanized Steel Pipe, Schedule 40 wall, 21-foot length. Conforms to ASTM A53 Grade B with 60,000 PSI tensile strength. The hot-dip zinc coating provides excellent corrosion resistance for outdoor and high-moisture use. Ideal for plumbing mains, HVAC piping, handrails, and structural posts. In stock for same-day Los Angeles pickup. Learn More

Grade 60 Hot Rolled Rebar, #7 size (7/8" diameter) in 20-foot lengths. Meets ASTM A615 standards with a minimum yield strength of 60,000 PSI and tensile strength of 90,000 PSI. Its deformed surface provides a superior mechanical bond with concrete, making it essential for reinforcing foundations, slabs, and columns. In stock for same-day Los Angeles pickup. Learn More

1" NPS Schedule 40 pipe manufactured from 304 stainless steel, supplied in a 240" (20 ft) length. Conforming to ASTM A312, it provides excellent weldability and corrosion resistance with a tensile strength of 73,200 PSI. This versatile size is ideal for fluid transport, industrial plumbing, and structural applications like handrails and support posts. In stock for Los Angeles pickup. Learn More

6" Nominal Pipe Size (NPS) Hot Rolled Black Pipe with a Schedule 40 wall (0.280"). Manufactured to meet ASTM A53 Grade B standards, this pipe provides a minimum tensile strength of 60,000 PSI and excellent weldability. Its large diameter is ideal for industrial process piping, structural columns, and main water lines. In stock for Los Angeles pickup. Learn More

3/4" x 3/4" A36 Hot Rolled Steel Square Bar, available in 240" (20 ft) lengths. This general-purpose structural steel conforms to ASTM A36, providing 36,000 PSI minimum yield strength and excellent weldability. Its medium size is ideal for equipment frames, structural bracing, trailer components, and general fabrication. In stock for Los Angeles pickup. Learn More

A36 Hot Rolled Steel Angle measuring 2" x 2" x 1/8" in 20-foot (240") lengths. This structural angle conforms to ASTM A36, providing a minimum yield strength of 36,000 PSI and excellent weldability. Its medium size is ideal for general structural framing, equipment bases, bracing, and heavy-duty shelving supports. In stock Los Angeles. Learn More

1-1/4 inch Nominal Pipe Size (NPS), Schedule 40 Hot Rolled Black Pipe in a 21 ft length. Manufactured to ASTM A53 Grade B standards, this carbon steel pipe offers 60,000 PSI tensile strength and excellent weldability. The medium diameter is ideal for plumbing mains, fire sprinkler systems, and structural applications. In stock for Los Angeles pickup. Learn More

1-1/2" x 1-1/2" Type 304 Stainless Steel Square Tube with a 0.120" wall and a 180 grit satin finish. Conforming to ASTM A269, this tube offers 73,200 PSI tensile strength, excellent corrosion resistance, and superior weldability. Its medium size is ideal for architectural handrails, equipment frames, and structural supports. In stock Los Angeles. Learn More

3" x 3" x 3/8" Hot Rolled Steel Angle, sold in 240-inch lengths. Conforms to ASTM A36 with a minimum yield strength of 36,000 PSI. This structural angle provides excellent weldability and good machinability. Its medium size is ideal for equipment bases, structural framing, and heavy-duty shelving supports. In stock for Los Angeles pickup. Learn More

3" x 3/16" A36 Hot Rolled Steel Flat Bar, supplied in a 240" length. Conforming to ASTM A36, this versatile structural steel offers a minimum yield strength of 36,000 PSI and excellent weldability for easy fabrication. Its medium size is ideal for structural bracing, machine ways, and general repair work. In stock for immediate Los Angeles pickup. Learn More

304 Stainless Steel Flat Bar measuring 3" wide by 1/4" thick in a 144" length. Certified to ASTM A276, this versatile bar offers 73,200 PSI tensile strength, excellent corrosion resistance, and superior weldability. Its medium size is ideal for fabricating structural braces, supports, base plates, and components for food processing equipment. In stock Los Angeles. Learn More

3" x 1/2" 304 Stainless Steel Flat Bar, 144" length. Conforms to ASTM A276. This versatile austenitic stainless offers excellent corrosion resistance and weldability with 73,200 PSI tensile strength. Its medium size is ideal for structural bracing, machine ways, wear strips, and architectural trim. In stock and ready for same-day pickup in Los Angeles. Learn More

1" Outer Diameter x 0.083" Wall Hot Rolled Steel Round Tube in 240" lengths. Conforming to ASTM A500 Grade B, this structural tubing provides a minimum yield strength of 46,000 PSI and excellent weldability for fabrication. Its medium size is well-suited for equipment frames, handrails, roll cages, and general structural supports. In stock for immediate Los Angeles pickup. Learn More

5/8" diameter A36 Hot Rolled Steel Round Bar in a 240" length. Conforming to ASTM A36, this bar provides 58,000-80,000 PSI tensile strength with excellent weldability and formability. Its versatile size is ideal for medium-duty applications including shafts, axles, and structural supports where a precise finish is not required. In stock for immediate Los Angeles pickup. Learn More

Size 10, 16-inch heavy-duty rubber rain boots. Designed for maximum protection in wet and muddy environments, these boots feature 100% waterproof construction and a rugged, slip-resistant outsole for secure footing on slippery surfaces. The durable yet flexible rubber material ensures all-day comfort for construction, landscaping, and general industrial use. In stock for immediate pickup at our Los Angeles location. Learn More

5/8" Hot Rolled Steel Square Bar, available in 20-foot lengths. This A36 grade carbon steel conforms to ASTM A36 and offers 36,000 PSI yield strength with excellent weldability. The hot rolling process gives it a scaly mill finish. Its medium size is ideal for structural frames, equipment supports, trailer components, and general fabrication projects. In stock for Los Angeles pickup. Learn More

6063-T5 Aluminum Pipe with a 1-1/2 inch nominal size and standard Schedule 40 wall thickness. This seamless extruded pipe conforms to ASTM B241 specifications and offers 27,000 PSI tensile strength. Known as "architectural aluminum," its excellent corrosion resistance and superior surface finish make it ideal for handrails, frames, and furniture. In stock for immediate cutting and pickup in Los Angeles. Learn More

6-inch Nominal Pipe Size (NPS) Schedule 40 Galvanized Pipe, 252-inch length. Conforms to ASTM A53 Grade B, delivering 60,000 PSI tensile strength and excellent weldability. The hot-dip zinc coating provides superior corrosion resistance for outdoor and high-moisture environments. Large diameter is ideal for main water lines, industrial process piping, and heavy structural columns. In stock Los Angeles. Learn More

1/2 inch Nominal Pipe Size (NPS) Hot Rolled Black Pipe with a Schedule 40 wall. This product conforms to ASTM A53 Grade B specifications, providing 60,000 PSI tensile strength and excellent weldability. The small diameter is ideal for plumbing, natural gas lines, compressed air systems, and light structural applications like handrails. Standard uncoated 'black' finish. In stock for Los Angeles pickup. Learn More

3" Nominal Pipe Size (NPS) Hot Rolled Black Pipe with a Schedule 40 wall. Conforming to ASTM A53 Grade B, this carbon steel pipe offers 60,000 PSI tensile strength and excellent weldability for fabrication. Its large diameter is suited for main fluid lines, industrial process piping, and structural applications like columns and heavy supports. In stock for Los Angeles pickup. Learn More

A36 Hot Rolled Steel Angle measuring 2" x 2" with a 1/4" thickness, in a 240" length. This structural angle conforms to ASTM A36 and offers a minimum yield strength of 36,000 PSI, excellent weldability, and good formability. Its medium size is ideal for structural framing, equipment bases, shelving, and general fabrication projects. In stock for same-day Los Angeles pickup. Learn More

2-inch Nominal Pipe Size (NPS) 6063-T5 Aluminum Pipe with a Schedule 40 wall, in a 240-inch length. Conforms to ASTM B241 standards with 27,000 PSI tensile strength. Known as architectural aluminum, it offers excellent corrosion resistance and a superior surface finish, making it ideal for handrails, frames, and display fixtures. In stock for same-day Los Angeles pickup. Learn More

1-1/2" NPS Schedule 40 Galvanized Steel Pipe, sold in 21-foot (252") lengths. Conforming to ASTM A53 Grade B, this pipe provides a minimum 60,000 PSI tensile strength and superior corrosion resistance from its zinc coating. Its versatile size is ideal for plumbing mains, structural handrails, fence posts, and other outdoor applications requiring durability. In stock Los Angeles. Learn More

5" Nominal Pipe Size (NPS) Hot Rolled Black Pipe with a Schedule 40 wall. This A53 Grade B steel pipe offers a minimum tensile strength of 60,000 PSI and excellent weldability. Its large diameter and robust wall thickness make it ideal for high-flow fluid transfer, main water lines, industrial process piping, and heavy-duty structural columns. In stock for Los Angeles pickup. Learn More

1-1/2" x 1-1/2" x 3/16" Hot Rolled Steel Angle conforming to ASTM A36. This general-purpose structural steel provides a minimum 36,000 PSI yield strength and excellent weldability. The medium size is ideal for equipment frames, support bracing, heavy-duty shelving, and general fabrication. In stock and ready for same-day pickup or delivery in Los Angeles. Learn More

2" x 2" x 3/16" A36 Hot Rolled Steel Angle in 20-foot lengths. Conforming to ASTM A36, this structural angle provides a minimum 36,000 PSI yield strength and excellent weldability for fabrication. Its versatile medium size is ideal for structural framing, equipment bases, industrial shelving, and general repairs. In stock and available for same-day pickup in Los Angeles. Learn More

A36 Hot Rolled Steel Angle measuring 5" x 5" with a 5/16" thickness. This structural angle conforms to ASTM A36 specifications, providing a minimum yield strength of 36,000 PSI and excellent weldability. Its large size makes it ideal for heavy structural applications, including building frames, equipment bases, and industrial supports. In stock and available for same-day pickup in Los Angeles. Learn More

304 Stainless Steel Flat Bar with a 3-inch width and 1/8-inch thickness, sold in 144-inch lengths. Conforming to ASTM A276, this bar provides 73,200 PSI tensile strength, excellent corrosion resistance, and superior weldability. Its versatile size is ideal for structural braces, equipment framework, base plates, and general fabrication projects. In stock for immediate pickup in Los Angeles. Learn More

A 1" x 3/8" 304 Stainless Steel Flat Bar, 144" in length. This versatile bar meets ASTM A276 standards and offers 73,200 PSI tensile strength, excellent corrosion resistance, and superior weldability. Its medium size is ideal for structural bracing, machine components, supports, and general fabrication projects requiring strength and longevity. In stock for same-day pickup in Los Angeles. Learn More

1-1/4" x 1-1/4" Stainless Steel Square Tube with a 0.120" wall and 180 grit satin finish. This 304 grade tube conforms to ASTM A269 and features 73,200 PSI tensile strength, excellent weldability, and corrosion resistance. Its medium size is ideal for structural frames, architectural handrails, and support columns. In stock for same-day cutting and pickup in Los Angeles. Learn More

4" x 4" x 0.120" wall 304 Stainless Steel Square Tube, 240" length. Meets ASTM A269 specifications. This large structural tube offers 73,200 PSI tensile strength, excellent corrosion resistance, and superior weldability. Its substantial size is ideal for heavy-duty applications like structural columns, industrial supports, and large equipment frames. In stock for same-day cutting and pickup in Los Angeles. Learn More

A36 Hot Rolled Steel Angle measuring 4" x 3" legs with a 3/8" thickness. Conforming to ASTM A36, this angle iron offers a minimum yield strength of 36,000 PSI and excellent weldability for robust joints. Its large size is ideal for heavy structural applications, building frames, industrial supports, and equipment manufacturing. In stock for immediate cutting and pickup in Los Angeles. Learn More

304 Stainless Steel Flat Bar, 1-1/2" wide by 1/4" thick. Conforms to ASTM A276, this versatile bar offers excellent corrosion resistance, weldability, and 73,200 PSI tensile strength. Its medium size is ideal for structural bracing, machine ways, equipment frames, and architectural trim. Annealed condition provides good formability. In stock and available for same-day pickup in Los Angeles. Learn More

2-1/2" x 3/8" Hot Rolled A36 Steel Flat Bar. This structural grade steel conforms to ASTM A36 and offers excellent weldability and good machinability. With a tensile strength of 58,000-80,000 PSI, it's ideal for manufacturing, construction, and industrial repair. Its medium size is suited for structural bracing, equipment frames, and base plates. In stock for Los Angeles pickup. Learn More

3/16" x 1-1/4" 304 Stainless Steel Flat Bar, 144" length. Conforms to ASTM A276, this versatile bar offers 73,200 PSI tensile strength, excellent corrosion resistance, and superior weldability. Its medium size is ideal for structural bracing, equipment framework, and architectural trim. A non-magnetic, austenitic grade perfect for food processing and general fabrication. In stock for immediate Los Angeles pickup. Learn More

1" x 1/4" Hot Rolled Steel Flat Bar, 240" length. Conforms to ASTM A36, a low-carbon structural steel with 58,000 PSI tensile strength and excellent weldability. This versatile bar is easy to form, drill, and machine. Its medium size is ideal for structural bracing, equipment frames, base plates, and general fabrication projects. In stock for immediate Los Angeles pickup. Learn More

3-1/2" x 0.188" wall Hot Rolled Steel Square Tube, 20 ft length. This A500 Grade B structural tubing offers a minimum yield strength of 46,000 PSI and excellent weldability. Its substantial size and strength-to-weight ratio make it ideal for heavy structural applications, including building frames, industrial supports, and heavy equipment bases. In stock for same-day Los Angeles pickup. Learn More

1" x 1" 304 Stainless Steel Square Bar, 144" length. This versatile bar meets ASTM A276 specifications and offers an excellent combination of strength (73,200 PSI tensile) and corrosion resistance. Its weldability and formability make it a standard for general fabrication. Medium size is ideal for structural supports, machine frames, braces, and shafts. In stock for immediate Los Angeles pickup. Learn More

A36 Hot Rolled Steel Angle measuring 6" x 6" with a 3/8" thickness. This structural shape conforms to ASTM A36 standards, delivering a minimum yield strength of 36,000 PSI and excellent weldability for robust joints. Its large size is ideal for heavy-duty applications including building frames, industrial equipment bases, and trailer manufacturing. In stock for Los Angeles pickup. Learn More

8" x 8" x 1/2" Hot Rolled A36 Steel Angle, sold in a 240" length. Conforming to ASTM A36, this angle offers a minimum yield strength of 36,000 PSI and excellent weldability. Its substantial size makes it ideal for heavy structural applications, including building frames, industrial equipment bases, and primary support columns. In stock for same-day Los Angeles pickup. Learn More

6" x 1/2" A36 Hot Rolled Steel Flat Bar, 240" length. Conforms to ASTM A36 with 36,000 PSI minimum yield strength and excellent weldability. This large-format structural bar provides robust support for heavy-duty applications. Its size is ideal for base plates, heavy structural components, die components, and trailer frames. In stock for immediate cutting and pickup in Los Angeles. Learn More

This 1-1/2" x 3/16" 304 Stainless Steel Angle offers excellent corrosion resistance and weldability for structural applications. Conforming to ASTM A276, it provides 73,200 PSI tensile strength. Its versatile 1-1/2" leg size is ideal for medium-duty structural framing, equipment bases, shelving, and architectural trim where both strength and a clean finish are required. In stock for immediate Los Angeles pickup. Learn More

3" x 3" x 1/4" A36 Hot Rolled Steel Angle, sold in 240" lengths. Conforming to ASTM A36, this structural angle provides a minimum 36,000 PSI yield strength and excellent weldability. The 3-inch leg size is ideal for medium-duty structural framing, equipment bases, shelving, and general fabrication projects requiring robust support. In stock and available for same-day pickup in Los Angeles. Learn More