Search results for: 'flat metal bar 5 8 x 10'

This 5" x 5" Heavy Duty Square Steel Base Plate is engineered from high-strength carbon steel for maximum durability. It comes pre-drilled for secure anchoring in structural and fabrication applications. Designed for compatibility with common industrial fastening systems like ASTM A307. Learn More

This 10" x 1/8" x 1" abrasive cut-off wheel is engineered for high-speed metal cutting applications. Featuring fiberglass reinforcement for durability and safety, it is fully compliant with ANSI B7.1 standards. Designed for tools operating at or below a maximum speed of 6,100 RPM. Learn More

This 8" x 8" heavy-duty square steel base plate provides a robust foundation for structural and industrial applications. Made from high-strength carbon steel, it features pre-drilled holes for compatibility with heavy-duty fasteners meeting SAE J429 and ASTM standards. Learn More

This 5” x .040” cut-off wheel is engineered for high-speed cutting of metal. It is an ANSI B7.1 compliant abrasive wheel featuring durable fiberglass reinforcement for safety and performance. Rated for a maximum of 12,200 RPM, it delivers precise, clean cuts in fabrication and MRO applications. Learn More

A36 Hot Rolled Steel Flat Bar measuring 10 inches wide by 3/8 inch thick, in 240-inch (20-foot) lengths. This structural bar conforms to ASTM A36 and provides a minimum yield strength of 36,000 PSI with excellent weldability. Its large width makes it ideal for heavy structural components, base plates for machinery, and die components. In stock for immediate cutting and pickup in Los Angeles. Learn More

The ACCESS 10 Transmitter is a durable, 10-digit remote for commercial garage doors and gates. Engineered for reliability and UL/CSA certified, it ensures secure access for MRO and facility management applications. Features a robust industrial polymer casing for long-term use. Learn More

Durable 5/8 Inch Square Plastic Caps designed for a secure, press-fit on square tubing. Made from industrial-grade, weather-resistant plastic, these caps provide a clean, finished appearance while protecting against dirt, moisture, and sharp edges. Ideal for fencing, furniture, and equipment fabrication. Learn More

Morse Metal Devil NXT

• 7-1/4" x 5/8"
• 5800 RPM
• 48 Teeth Metal
• Carbide Tipped Circular Saw Blade

Learn More

Our 5" (5/8) J-Bolt Adjustable Barrel Hinges are engineered from heavy-duty, weldable low carbon steel for superior strength and durability. Designed for high-load applications, these hinges provide smooth, reliable operation for heavy gates and doors. The adjustable J-bolt allows for precise alignment during installation. Learn More

This industrial-grade, oil-based DTM (Direct-to-Metal) paint offers a durable flat black finish. Engineered for superior adhesion and corrosion resistance consistent with MIL-SPEC performance criteria, it is ideal for protecting steel and iron surfaces in fabrication and MRO projects. Learn More

This 5” x 1/4” grinding disc is engineered for high-performance metal removal. Made from durable aluminum oxide with fiberglass reinforcement, it meets ANSI B7.1 safety standards and is rated for a maximum speed of 12,200 RPM. Learn More

5" x 1/8" 1018 Cold Rolled Flat Bar, 144" length. Conforming to ASTM A108, this low-carbon steel offers a smooth, scale-free finish and tight dimensional tolerances. It has a tensile strength of 63,800 PSI and excellent machinability. The wide 5-inch profile is ideal for base plates, heavy structural bracing, and die components. In stock for Los Angeles pickup. Learn More

3" x 5/8" 1018 Cold Rolled Steel Flat Bar, 144" length. Conforms to ASTM A108 with 63,800 PSI tensile strength, excellent machinability, and superior dimensional tolerances. Its smooth, scale-free surface is ideal for painting or plating. This medium-width bar is used for structural bracing, machine ways, and base plates. In stock for same-day Los Angeles pickup. Learn More

A 5/8" x 1/8" 6061-T6 Aluminum Flat Bar in a 144" length. This product conforms to ASTM B211 standards, offering a versatile combination of high strength (45,000 PSI tensile), excellent corrosion resistance, and good machinability. Its small cross-section is ideal for manufacturing lightweight brackets, mounting straps, shims, and custom fabrication projects. In stock for Los Angeles pickup. Learn More

A36 Hot Rolled Steel Flat Bar, 10 inches wide by 1/4 inch thick, in a 240-inch (20-foot) length. This structural steel conforms to ASTM A36 specifications and offers a minimum yield strength of 36,000 PSI with excellent weldability. Its substantial width makes it ideal for heavy-duty applications like base plates, structural supports, and heavy equipment fabrication. In stock for same-day Los Angeles pickup. Learn More

10 inch by 1/2 inch A36 Hot Rolled Steel Flat Bar, available in 20-foot lengths. This structural steel conforms to ASTM A36 specifications, providing a minimum yield strength of 36,000 PSI and excellent weldability. Its large width makes it an ideal choice for heavy-duty applications such as machinery base plates, structural supports, die components, and trailer frames. In stock for Los Angeles pickup. Learn More

A36 Hot Rolled Steel Flat Bar measuring 5 inches wide by 1/8 inch thick. Conforming to ASTM A36, this structural steel bar offers 36,000 PSI minimum yield strength and excellent weldability. Its large width makes it ideal for manufacturing base plates, heavy structural supports, trailer frames, and die components. This versatile, low-cost material is easily fabricated. In stock for same-day Los Angeles pickup. Learn More

5" x 3/8" A36 Hot Rolled Steel Flat Bar. This structural steel conforms to ASTM A36, providing a minimum yield strength of 36,000 PSI and excellent weldability for easy fabrication. The large 5-inch width makes it a robust choice for heavy structural components, equipment bases, die components, and machinery mounting plates. In stock and available for custom cutting and same-day Los Angeles pickup. Learn More

3" x 5/8" Hot Rolled Steel Flat Bar, 240" length. Conforms to ASTM A36 with a minimum yield strength of 36,000 PSI and excellent weldability. This versatile structural steel bar is ideal for general fabrication, structural bracing, support straps, and base plates. Its medium width provides a solid foundation for equipment and machinery. In stock for same-day Los Angeles pickup. Learn More

4" x 5/8" A36 Hot Rolled Steel Flat Bar. Conforms to ASTM A36 with 36,000 PSI minimum yield strength. Features excellent weldability and good machinability. The hot-rolled process results in a scaly finish and slightly rounded edges. This large width is ideal for structural base plates, heavy equipment supports, trailer frames, and general fabrication projects. In stock for immediate Los Angeles pickup. Learn More

1/4" x 5/8" 1018 Cold Rolled Steel Flat Bar, 144" length. Conforms to ASTM A108 with a tensile strength of 63,800 PSI and excellent machinability. The cold drawing process provides a smooth, scale-free surface and tight dimensional tolerances. This small-width bar is ideal for brackets, straps, shims, and precision-machined components. In stock for immediate Los Angeles pickup. Learn More

The Super Tool Press Pliers 10" are engineered from high-strength forged alloy steel for superior gripping power and durability. Designed to meet ASME B107 standards, these industrial-grade pliers are essential for demanding fabrication and MRO tasks. Learn More

A36 Hot Rolled Steel Flat Bar measuring 5/8" wide by 1/4" thick in 240" lengths. Conforming to ASTM A36, this structural steel offers a minimum yield strength of 36,000 PSI and excellent weldability. The small cross-section is ideal for general fabrication, including making support brackets, straps, shims, and small frame stock. In stock for immediate pickup in Los Angeles. Learn More

2" x 5/8" 6061-T6 Aluminum Flat Bar, 144" length. Conforms to ASTM B211 with 45,000 PSI tensile strength, excellent machinability, and superior corrosion resistance. This versatile, medium-width bar is ideal for structural bracing, machine ways, base plates, and custom fabricated parts. Its high strength-to-weight ratio makes it a top choice for manufacturing and structural projects. In stock for Los Angeles pickup. Learn More

This 3" x 5/8" 6061-T6 Aluminum Flat Bar offers an excellent combination of strength, workability, and corrosion resistance. Conforming to ASTM B211 with a tensile strength of 45,000 PSI, this material is easily machined, welded, and finished. Its medium size is ideal for structural bracing, machine ways, wear strips, and mounting plates where a high strength-to-weight ratio is required. In stock for immediate Los Angeles pickup. Learn More

This 4" x 4" Heavy Duty Square Steel Base Plate is a robust mounting solution for structural applications. Made from industrial-grade flat steel and pre-drilled with holes for easy anchoring, it provides a stable foundation for posts, columns, and machinery. Ideal for fabrication and construction projects requiring a durable mounting point. Learn More

This 4-1/2" x .040" x 7/8" cut-off wheel is an industrial-grade abrasive engineered for high-speed cutting. It is ANSI B7.1 compliant and features fiberglass reinforcement for enhanced safety and durability during metal fabrication and MRO tasks. Learn More

This 5/8" x 5" Heavy-Duty Wedge Anchor is engineered for reliable fastening in solid concrete. Manufactured from high-strength carbon steel and finished with a CR3+ zinc plating for enhanced corrosion resistance, it provides superior holding power for structural and MRO applications. Includes nut and washer for immediate installation. Learn More

1-1/2" x 5/8" 6061-T6 Aluminum Flat Bar, 144" length. Conforms to ASTM B211 with 45,000 PSI tensile strength, excellent weldability, and corrosion resistance. This versatile, medium-width bar is ideal for structural bracing, machine ways, mounting plates, and general fabrication. Its high strength-to-weight ratio makes it a top choice for projects requiring robust yet lightweight components. In stock for same-day Los Angeles pickup. Learn More

This 6" x 6" heavy-duty square steel base plate is manufactured from high-strength, low-carbon structural steel, meeting key ASTM properties. Pre-drilled holes ensure secure anchoring for structural posts, columns, and industrial equipment. Learn More

Our 3" x 3" Heavy Duty Square Steel Base Plate is a robust mounting solution for structural applications. Made from high-strength, weldable low-carbon steel, it features pre-drilled holes for secure anchoring. Ideal for fencing, posts, and equipment support. Learn More

5" x 10 lbs/ft Hot Rolled Steel Standard I-Beam, 20 ft length. Conforms to ASTM A36, providing a minimum yield strength of 36,000 PSI and excellent weldability for easy fabrication. Its dimensions (5" Height x 3" Flange) make it a robust choice for structural framing, machinery bases, and support girders. In stock for same-day Los Angeles pickup. Learn More

5-inch Nominal Pipe Size (NPS) 304 Stainless Steel Pipe, Schedule 10 wall, in 240-inch lengths. Conforming to ASTM A312, this pipe provides excellent corrosion resistance and weldability. With a tensile strength of 73,200 PSI, it is ideal for large-scale fluid transport, industrial process lines, and structural applications requiring strength and longevity. In stock for Los Angeles pickup. Learn More

These 10" off-white gloves are crafted from soft, durable goat leather for excellent dexterity and tactile sensitivity. They are ANSI/ISEA 105 rated, making them ideal for general handling, assembly, and MRO tasks requiring reliable hand protection. Learn More

5" x 1" A36 Hot Rolled Steel Flat Bar, sold in 240" (20-foot) lengths. This structural steel conforms to ASTM A36, offering a minimum yield strength of 36,000 PSI and excellent weldability. Its substantial cross-section makes it ideal for manufacturing heavy-duty base plates, structural supports, trailer frames, and die components where strength and rigidity are critical. In stock and available for same-day pickup in Los Angeles. Learn More

This 6" x .040" x 7/8" Cut-Off Wheel is an industrial-grade abrasive cutting disc designed for high-speed cutting. Compliant with ANSI B7.1 safety standards, it features fiberglass reinforcement for enhanced durability and operator safety. Ideal for cutting steel, iron, and other metals. Learn More

5 Inch by 3/16 Inch Hot Rolled Steel Flat Bar, 240-inch length. Conforming to ASTM A36, this bar provides a minimum yield strength of 36,000 PSI and excellent weldability for general fabrication. The large 5-inch width is ideal for creating structural base plates, heavy equipment mounting, trailer frames, and die components where strength and rigidity are essential. In stock Los Angeles. Learn More

5" x 1/4" Hot Rolled A36 Steel Flat Bar, sold in 240" lengths. Conforms to ASTM A36 with a minimum yield strength of 36,000 PSI and excellent weldability. This large-format flat bar is ideal for heavy structural applications, including base plates for machinery and columns, support braces, and frame components where strength and durability are critical. In stock for same-day Los Angeles pickup. Learn More

A36 Hot Rolled Steel Flat Bar measuring 1 inch wide by 5/16 inch thick, in a 240-inch (20 ft) length. This structural steel bar conforms to ASTM A36 specifications and offers a minimum yield strength of 36,000 PSI. Its excellent weldability and good machinability make it ideal for structural bracing, machine ways, and general fabrication projects. In stock for same-day Los Angeles pickup. Learn More

5" x 1/2" Hot Rolled A36 Steel Flat Bar, supplied in 240-inch (20-foot) lengths. This structural steel bar conforms to ASTM A36 and offers a minimum yield strength of 36,000 PSI with excellent weldability and formability. Its large cross-section is ideal for manufacturing heavy-duty base plates, structural supports, trailer frames, and other general fabrication projects requiring robust strength. In stock for immediate Los Angeles pickup. Learn More

10 Gauge A36 Hot Rolled Steel Sheet, measuring 48" x 120". Certified to ASTM A36, this sheet offers a minimum yield strength of 36,000 PSI and tensile strength of 58,000-80,000 PSI. Its excellent weldability and good formability make it a cost-effective choice for structural applications, gusset plates, and general fabrication projects where precise tolerances are not required. In stock for immediate Los Angeles pickup. Learn More

5" x 1/4" 304 Stainless Steel Flat Bar, 144" length. Conforms to ASTM A276 with 73,200 PSI tensile strength, excellent weldability, and superior corrosion resistance. This versatile austenitic stainless grade is non-magnetic in the annealed condition. Its large profile is ideal for heavy structural supports, base plates, gussets, and food processing equipment framework. In stock for Los Angeles pickup. Learn More

3/4" x 5/16" 1018 Cold Rolled Steel Flat Bar, 144" length. Conforms to ASTM A108, providing 63,800 PSI tensile strength, a smooth surface finish, and tight dimensional tolerances. This grade offers good machinability and weldability. Its small profile is ideal for manufacturing precision brackets, straps, shims, and small frame components. In stock for Los Angeles pickup. Learn More

A compact and secure 10-digit mini garage door and gate opener with keychain. Built with industrial-grade components for reliable access control in commercial and MRO applications. Features a durable, weather-resistant casing for long-lasting performance. Learn More

This 5/16" x 4" One Way Screw is crafted from industrial-grade steel for reliable, tamper-resistant fastening. Its unique head design, conforming to general industrial standards, allows for installation with a standard screwdriver but prevents removal. Ideal for security applications where permanent or semi-permanent assembly is required. Learn More

Learn More

This 5/16" x 2" one-way screw is a tamper-resistant fastener made from industrial-grade low carbon steel with a protective black finish. Designed for security applications based on ASTM A307 material standards where removal prevention is critical. Learn More

Protect your hands with our industrial-grade Goat Leather Driving Gloves. These gloves are rated to ANSI/ISEA 105 standards, providing excellent dexterity and durability for material handling. The premium goat leather construction ensures a comfortable fit and reliable protection for MRO and fabrication tasks. Learn More

Our industrial-grade red DTM paint is a high-performance, oil-based alkyd coating designed for superior corrosion protection. This direct-to-metal formula saves time by eliminating the need for a separate primer, ideal for demanding fabrication and MRO projects. Learn More

8" x 3/8" A36 Hot Rolled Steel Flat Bar, 240" length. A structural grade conforming to ASTM A36 with 36,000 PSI minimum yield strength and excellent weldability. This large-dimension structural bar is ideal for manufacturing heavy-duty base plates, trailer frames, and industrial supports where strength and durability are critical. In stock for immediate cutting and same-day pickup in Los Angeles. Learn More

This industrial-grade, oil-based DTM paint delivers a durable black semi-gloss finish. Its alkyd enamel formulation provides excellent corrosion resistance and adhesion directly on prepared metal surfaces, making it ideal for fabrication and MRO projects. Learn More

This 5/16" x 1" Hex Lag Screw is a heavy-duty fastener made from low carbon steel, meeting ASTM A307 standards. With a minimum tensile strength of 60,000 psi and a corrosion-resistant zinc plating, it ensures strong, reliable connections in wood framing and construction applications. Learn More

5" x 5" x 3/8" A36 Hot Rolled Steel Angle, sold in a 240" (20 ft) length. This structural angle conforms to ASTM A36 and provides a minimum yield strength of 36,000 PSI. Its large dimensions make it ideal for heavy structural applications, including building frames and industrial supports. A36 steel offers excellent weldability and fabrication characteristics. In stock for same-day Los Angeles pickup. Learn More

This industrial-grade Safety Yellow DTM (Direct-to-Metal) paint provides exceptional corrosion protection in a single coat. Formulated as a high-performance alkyd coating, it's engineered for durability on steel and other metal surfaces. Ideal for MRO and new fabrication projects. Learn More

The 1/8" Cobalt Drill Bit is engineered from M35 steel with 5% cobalt for superior heat resistance when drilling hard metals. Featuring a 135° split-point geometry for precision, it is ideal for stainless steel and cast iron applications compliant with ANSI/ASME B94.11M standards. Learn More

Metalize Industrial Primer is a high-performance alkyd coating engineered for superior corrosion resistance on metal surfaces. Formulated to meet rigorous MIL-SPEC performance criteria, it provides an excellent foundation for DTM (Direct-to-Metal) applications. Ideal for demanding industrial, MRO, and fabrication projects. Learn More

Industrial-grade Acetone is a powerful, fast-evaporating solvent designed for cleaning and degreasing metal surfaces. It effectively removes oils, grease, and contaminants, ensuring optimal surface preparation for painting or welding. Conforms to industrial purity standards like ASTM D329. Learn More

5/8" Hot Rolled Steel Square Bar, available in 20-foot lengths. This A36 grade carbon steel conforms to ASTM A36 and offers 36,000 PSI yield strength with excellent weldability. The hot rolling process gives it a scaly mill finish. Its medium size is ideal for structural frames, equipment supports, trailer components, and general fabrication projects. In stock for Los Angeles pickup. Learn More

5/8 inch 1018 Cold Rolled Hexagon Bar, 144" length. Conforms to ASTM A108 with 63,800 PSI tensile strength. The cold drawing process provides a smooth surface, tight dimensional accuracy, and excellent machinability. This medium-sized bar is ideal for manufacturing nuts, standoffs, hydraulic fittings, and machinery shafts. In stock for Los Angeles pickup. Learn More

5/8" x 5/8" 1018 Cold Rolled Square Bar in 144" lengths. Produced to ASTM A108 standards, this bar offers a tensile strength of 63,800 PSI, excellent machinability, and a superior surface finish. Its tight dimensional tolerances make it ideal for shafts, fixtures, and precision machined components requiring minimal prep work. In stock for same-day Los Angeles pickup. Learn More

5/8" x 5/8" Type 304 Stainless Steel Square Bar in 144" lengths. This versatile bar conforms to ASTM A276 and has a tensile strength of 73,200 PSI. Known for its excellent corrosion resistance and weldability, it's a go-to material for general fabrication. Its medium size is ideal for structural bracing, equipment frames, shafts, and supports. In stock for same-day pickup in Los Angeles. Learn More

A versatile, industrial-grade lacquer thinner for reducing paint viscosity and cleaning metal surfaces. This fast-evaporating solvent ensures optimal paint flow and prepares substrates for DTM coatings. Ideal for use with alkyd and oil-based industrial paints. Learn More

Our Pacific Brown industrial-grade paint features advanced Direct-to-Metal (DTM) technology for superior corrosion protection. This durable alkyd coating is engineered for single-coat application on prepared metal surfaces, ideal for demanding MRO and fabrication projects. Learn More

Our industrial-grade Gray DTM (Direct-to-Metal) Paint is a high-performance alkyd coating designed for superior corrosion resistance. This single-coat system, formulated to meet rigorous industrial performance criteria, acts as both a primer and topcoat, ideal for protecting steel and iron surfaces. Learn More

This 5/16" x 3" one-way screw is engineered for permanent, tamper-resistant applications. Manufactured from industrial-grade steel with a protective black finish, its unique drive system prevents removal once installed. Conforms to common ANSI/ASME dimensional standards. Learn More

A versatile 2 Inch by 3/8 Inch 304 Stainless Steel Flat Bar, 144 inches long. This bar meets ASTM A276 standards and offers an excellent combination of corrosion resistance, strength, and weldability with a tensile strength of 73,200 PSI. Its medium width makes it ideal for structural bracing, machine ways, framework, and food processing equipment. Available for same-day pickup in Los Angeles. Learn More

5/8" x 5/8" Hot Rolled Steel Square Tube with a 0.065" wall thickness, supplied in 20-foot lengths. Conforming to ASTM A500 Grade B, this structural tubing offers a minimum yield strength of 46,000 PSI and excellent weldability. Its small profile is ideal for lightweight frames, supports, brackets, and general fabrication projects where strength and economy are key. In stock for same-day Los Angeles pickup. Learn More

Our 5-inch barrel hinges are engineered from high-strength carbon steel for maximum durability and load capacity. Designed for weld-on applications, these hinges provide a robust pivot point for heavy gates, doors, and industrial equipment. They feature a grease zerk fitting for easy maintenance and extended service life. Learn More

Our industrial-grade DTM Clear Coat is a high-performance alkyd coating designed for direct application on metal surfaces. It provides exceptional corrosion resistance and a durable, transparent finish ideal for MRO and fabrication projects. Learn More

1" x 1/8" 1018 Cold Rolled Steel Flat Bar, 144" length. Conforms to ASTM A108, offering 63,800 PSI tensile strength and excellent machinability (70%). The cold drawn process provides a smooth, scale-free finish and tight dimensional tolerances. This medium-width bar is ideal for structural bracing, machine ways, and wear strips where precision is key. In stock for Los Angeles pickup. Learn More

2" x 1/8" 1018 Cold Rolled Steel Flat Bar, 144" length. Conforming to ASTM A108, this cold finished bar offers a smooth, scale-free surface and tight dimensional tolerances. With a tensile strength of 63,800 PSI and good machinability, it's ideal for manufacturing base plates, machine ways, and structural bracing. In stock for immediate cutting and Los Angeles pickup. Learn More

A 4" wide by 1/8" thick 1018 Cold Rolled Steel Flat Bar, supplied in a 144" length. This bar meets ASTM A108 standards and features 63,800 PSI tensile strength, tight dimensional tolerances, and good weldability. The cold drawn finish provides a smooth, scale-free surface ideal for machining. Its large width makes it suitable for base plates, structural supports, and die components. In stock Los Angeles. Learn More

1" x 3/8" 1018 Cold Rolled Steel Flat Bar, 144" length. Conforms to ASTM A108 with 63,800 PSI tensile strength and excellent machinability. The cold drawing process provides a smooth, scale-free surface and tight dimensional tolerances. Ideal for base plates, mounting brackets, and machine components requiring precision without extensive finishing. In stock for Los Angeles pickup. Learn More

2" x 3/8" 1018 Cold Rolled Steel Flat Bar, 144" length. Conforms to ASTM A108 with 63,800 PSI tensile strength. This grade offers a smooth, scale-free finish, tight dimensional tolerances, and excellent machinability. Its medium width is ideal for structural bracing, machine ways, wear strips, and general fabrication projects requiring precision. In stock Los Angeles. Learn More

3/8" x 3" 1018 Cold Rolled Flat Bar, 144" length. Conforms to ASTM A108 specifications with 63,800 PSI tensile strength and a clean, scale-free surface. Its excellent machinability and tight dimensional tolerances make it a reliable choice for manufacturing. This medium-width bar is ideal for structural bracing, base plates, and machine components. In stock for Los Angeles pickup. Learn More

4" x 3/8" 1018 Cold Rolled Steel Flat Bar in a 144" length. This bar meets ASTM A108 standards, providing 63,800 PSI tensile strength, a smooth scale-free finish, and tight dimensional tolerances. Its large width makes it ideal for base plates, heavy structural bracing, and die components where precision and strength are required. In stock and available for same-day pickup in Los Angeles. Learn More

This 6 inch by 3/8 inch 1018 Cold Rolled Steel Flat Bar offers tight dimensional tolerances and a smooth, scale-free surface. Conforming to ASTM A108, it has a tensile strength of 63,800 PSI and excellent machinability. Its large width makes it ideal for base plates, structural gussets, and heavy equipment mounting. In stock for Los Angeles pickup. Learn More

This 5/16" x 4" Hex Lag Screw is manufactured from durable low carbon steel to meet ASTM A307 performance standards. It features a corrosion-resistant zinc plating (per ASTM B633), making it ideal for construction and general framing applications. Learn More

A 6" wide by 3/8" thick 304 Stainless Steel Flat Bar in a 144" length. This austenitic stainless grade conforms to ASTM A276, offering excellent corrosion resistance and weldability. Its substantial size is ideal for heavy structural applications like base plates, gussets, and equipment mounts where strength and longevity are critical. In stock for Los Angeles pickup. Learn More

1 inch by 1/8 inch A36 Hot Rolled Steel Flat Bar, 240-inch length. Conforming to ASTM A36, this bar offers a minimum yield strength of 36,000 PSI and excellent weldability for structural applications. Its medium size is ideal for support braces, frame components, and general repair work. In stock for immediate cutting and pickup in Los Angeles. Learn More

2" x 1/8" A36 Hot Rolled Steel Flat Bar, available in 20-foot lengths. This structural steel bar conforms to ASTM A36, providing a minimum yield strength of 36,000 PSI and excellent weldability. Its medium size is versatile for structural bracing, equipment frames, base plates, and general fabrication projects. The hot-rolled finish has a characteristic scale. In stock for same-day Los Angeles pickup. Learn More

3" x 1/8" A36 Hot Rolled Steel Flat Bar in 20-foot lengths. This structural grade steel conforms to ASTM A36, offering 36,000 PSI minimum yield strength and excellent weldability for general fabrication. Its medium width is ideal for structural bracing, machine ways, wear strips, and base plates. In stock for same-day cutting and pickup in Los Angeles. Learn More

A36 Hot Rolled Steel Flat Bar measuring 4 inches wide by 1/8 inch thick, in a 240-inch length. This structural steel conforms to ASTM A36 and provides a minimum yield strength of 36,000 PSI. Its excellent weldability and formability make it a versatile choice. The large width is ideal for manufacturing base plates, heavy structural supports, and frame components. In stock for Los Angeles pickup. Learn More

A36 Hot Rolled Steel Flat Bar, measuring 6 inches wide by 1/8 inch thick in a 240-inch length. This versatile structural steel conforms to ASTM A36 standards, offering a minimum yield strength of 36,000 PSI and excellent weldability. Its large width makes it ideal for manufacturing base plates, heavy equipment mounting, structural bracing, and general fabrication projects. In stock for same-day Los Angeles pickup. Learn More

A36 Hot Rolled Steel Flat Bar, 8" wide by 1/4" thick in a 240" length. This structural bar meets ASTM A36 standards and offers a minimum yield strength of 36,000 PSI with excellent weldability. The large width makes it ideal for heavy structural applications, including base plates for columns and machinery, support braces, and frame components. In stock for same-day Los Angeles pickup. Learn More

A36 Hot Rolled Steel Flat Bar, 1" wide by 3/8" thick in a 240-inch length. This general-purpose structural steel conforms to ASTM A36, offering a minimum yield strength of 36,000 PSI and excellent weldability. Its medium width is ideal for structural bracing, machine ways, support brackets, and general fabrication projects. In stock for same-day Los Angeles pickup. Learn More

12 inch by 3/8 inch A36 Hot Rolled Steel Flat Bar, 240-inch length. Conforms to ASTM A36 with 36,000 PSI minimum yield strength and excellent weldability. This large-format structural bar is ideal for heavy-duty applications like base plates, structural supports, die components, and equipment frames where strength and rigidity are critical. In stock Los Angeles. Learn More

This 2 inch by 3/8 inch A36 Hot Rolled Steel Flat Bar is a versatile structural steel that conforms to ASTM A36. It offers a minimum yield strength of 36,000 PSI and excellent weldability and formability. Its medium size is ideal for structural bracing, machine ways, base plates, and general fabrication projects requiring strength and durability. In stock and available for same-day pickup in Los Angeles. Learn More

A36 Hot Rolled Steel Flat Bar, 3 inches wide by 3/8 inch thick. Conforms to ASTM A36 standards with a minimum yield strength of 36,000 PSI and excellent weldability for easy fabrication. Its medium size is ideal for structural braces, equipment mounts, base plates, and general repairs. In stock for Los Angeles pickup. Learn More

4 Inch by 3/8 Inch Hot Rolled Steel Flat Bar, 240-inch length. Conforms to ASTM A36 specifications, providing 36,000 PSI minimum yield strength and excellent weldability for structural applications. This large-format bar is ideal for manufacturing base plates, heavy structural supports, die components, and general fabrication projects. In stock and ready for same-day pickup in Los Angeles. Learn More

A 6" x 3/8" Hot Rolled Steel Flat Bar made from structural A36 steel. Conforming to ASTM A36, it provides a minimum yield strength of 36,000 PSI and excellent weldability for general fabrication. This large-format bar is ideal for creating machinery base plates, heavy structural supports, trailer frame components, and industrial reinforcements. In stock for immediate Los Angeles pickup. Learn More

8" x 1/2" A36 Hot Rolled Steel Flat Bar, 240" length. Conforms to ASTM A36 with a minimum yield strength of 36,000 PSI and excellent weldability. This large-format flat bar is ideal for manufacturing heavy structural components, base plates for machinery and columns, and general fabrication where strength and durability are critical. In stock and available for same-day pickup in Los Angeles. Learn More

Pacific Brown DTM is a high-performance, oil-based (alkyd) industrial coating designed for direct application to metal. It provides excellent corrosion resistance and a durable finish, making it ideal for demanding MRO and fabrication projects. Learn More

3/4" x 1/8" 304 Stainless Steel Flat Bar, sold in 144" lengths. This versatile bar meets ASTM A276 specifications and provides excellent corrosion resistance and weldability. Its 73,200 PSI tensile strength makes it a reliable choice for general fabrication. The small profile is ideal for creating custom brackets, support straps, and decorative trim. In stock for same-day Los Angeles pickup. Learn More

5/8" diameter 1018 Cold Rolled Steel Round Bar, 144" length. This bar conforms to ASTM A108 and offers 63,800 PSI tensile strength, superior dimensional tolerance, and a smooth, scale-free surface. Its excellent machinability and good weldability make it a versatile choice for shafts, axles, pins, and custom machined components. In stock for same-day Los Angeles pickup. Learn More

5/8" diameter 304 Stainless Steel Round Bar, sold in 144" lengths. Certified to ASTM A276, this versatile austenitic steel features 73,200 PSI tensile strength, excellent corrosion resistance, and superior weldability. Its medium diameter is ideal for general-purpose shafts, axles, bushings, and architectural applications requiring strength and durability. In stock for Los Angeles pickup. Learn More

1/8" x 1/4" 1018 Cold Rolled Steel Flat Bar, 144" length. Conforms to ASTM A108 with 63,800 PSI tensile strength, good weldability, and a 70% machinability rating. The cold drawn process provides a smooth, scale-free finish and tight dimensional tolerances. Its small profile is ideal for brackets, shims, straps, and small frame stock. In stock for Los Angeles pickup. Learn More

1/8" x 1/2" 1018 Cold Rolled Steel Flat Bar, 144" length. Conforms to ASTM A108 with 63,800 PSI tensile strength and a smooth, scale-free finish. This grade offers excellent machinability and weldability, making its small profile ideal for fabricating custom brackets, straps, shims, and support braces. In stock for immediate Los Angeles pickup. Learn More

1/8" x 3/4" 1018 Cold Rolled Flat Bar, 144" length. Conforms to ASTM A108 with a tensile strength of 63,800 PSI. This grade offers excellent machinability and a smooth, scale-free surface due to the cold drawing process. Ideal for manufacturing small brackets, mounting straps, shims, and precision frame components. In stock for Los Angeles pickup. Learn More

3/4" x 3/8" 1018 Cold Rolled Flat Bar, 144" length. Conforms to ASTM A108 with 63,800 PSI tensile strength. The cold drawing process provides a smooth, scale-free finish and tight dimensional tolerances, making it excellent for machining and welding. This small size is ideal for making brackets, straps, shims, and small frame stock. In stock for Los Angeles pickup. Learn More