Search results for: 'low carbon steel fender water'

This 4” x 1-¾” V-Groove Wheel is an industrial-grade component designed for high-capacity material handling. Manufactured from high-strength steel for durability, it supports heavy loads on inverted angle iron tracks. Ideal for sliding gates, assembly lines, and industrial carts. Learn More

This industrial-grade Safety Yellow DTM (Direct-to-Metal) paint provides exceptional corrosion protection in a single coat. Formulated as a high-performance alkyd coating, it's engineered for durability on steel and other metal surfaces. Ideal for MRO and new fabrication projects. Learn More

This industrial-grade, oil-based DTM (Direct-to-Metal) paint offers a durable flat black finish. Engineered for superior adhesion and corrosion resistance consistent with MIL-SPEC performance criteria, it is ideal for protecting steel and iron surfaces in fabrication and MRO projects. Learn More

The Hook Lock Double Cylinder provides robust security for commercial and industrial gates. Featuring a hardened steel hook bolt and dual-keyed access, this lock is engineered for high-traffic applications and enhanced access control, designed to meet key industry standards for durability and security. Learn More

1-1/2" Single Lock Box constructed from durable, weldable steel. Designed for securing slide or swing gates, this hardware fits 1-1/2" square or round tubing. The weld-on design ensures a permanent, secure installation for standard gate locks. Ideal for residential, commercial, and industrial fence applications. In stock for immediate pickup in Los Angeles. Learn More

NEW TOYOTA GRAY is a high-performance, oil-based industrial coating featuring Direct-to-Metal (DTM) technology. This industrial-grade alkyd enamel provides excellent corrosion resistance and a durable, protective finish for demanding applications on steel, iron, and equipment surfaces. Learn More

Our 12-inch rubber roller is an industrial-grade component designed for high-load capacity material handling. Featuring a durable, non-marring rubber surface bonded to a steel core, it provides smooth movement for conveyor systems and industrial carts. Engineered to meet demanding MRO and fabrication requirements. Learn More

Durable 1-1/4" x 1-1/4" x 16GA Galvanized Slotted Angle for versatile framing and support applications. Made from commercial-grade, corrosion-resistant galvanized steel conforming to ASTM A653 standards, it is ideal for constructing custom shelving, racks, and braces. Pre-punched slots allow for easy bolt-together assembly. Learn More

Durable Galvanized Slotted Angle for versatile framing and support applications. Fabricated from commercial-grade steel with a corrosion-resistant galvanized finish meeting ASTM A653 coating standards. The 1-1/2" x 1-1/2" x 16GA profile provides reliable integrity for MRO and construction projects. Learn More

This 4-inch V-Groove Wheel is machined from solid steel for maximum durability and load capacity. The V-groove is engineered for smooth operation on inverted angle iron track, making it the ideal choice for heavy sliding gates, industrial doors, and material handling carts. Its robust construction ensures reliable performance in demanding applications. In stock for same-day pickup in Los Angeles. Learn More

Protects steel surfaces with a high-purity, zinc-rich coating. This cold galvanized primer provides sacrificial, long-lasting corrosion resistance comparable to hot-dip galvanizing. The fast-drying formula is ideal for repairing damaged galvanized surfaces, protecting welds, and as a durable base coat for painting. In stock for immediate pickup in Los Angeles. Learn More

This 60 Grit Zirconia Flap Disc is a high-performance abrasive for rapid stock removal and finishing on steel and other metals. It is engineered with a durable zirconia alumina grain and complies with ANSI B7.1 safety standards. The Type 29 conical shape is ideal for aggressive grinding. Learn More

20 Gauge Cold Rolled Steel Sheet, 4' x 10' size. Grade 1018, conforming to ASTM A1008. Features a smooth, clean surface finish and tight dimensional tolerances. With 63,800 PSI tensile strength, it offers excellent formability for bending and moderate drawing. This thin gauge is ideal for automotive panels, appliance casings, and electronic enclosures. In stock for immediate pickup in Los Angeles. Learn More

A heavy-duty 1-1/2" x 3" Large L-Clip Bracket fabricated from A36 structural steel. This versatile hardware component is designed for strong right-angle connections in construction, framing, and industrial applications. It features a 3/8" pre-drilled hole for fast, secure installation and offers excellent weldability. Conforms to ASTM A36 specifications. In stock for Los Angeles pickup. Learn More

18 Gauge (0.0478") 1018 Cold Rolled Steel Sheet, 48" wide by 120" long. This material offers a smooth, scale-free surface, superior dimensional tolerance, and excellent formability for bending and stamping. With good weldability and 63,800 PSI tensile strength, it is a versatile choice for applications requiring a precise, paint-ready surface, such as electronic enclosures and automotive panels. In stock for Los Angeles pickup. Learn More

A36 Hot Rolled Steel Channel, C6 x 13 size, measuring 6" in depth with a 2.157" flange and weighing 13 lbs/ft. Conforming to ASTM A36, this structural channel offers a minimum yield strength of 36,000 PSI and excellent weldability. Its large size is ideal for equipment frames, structural supports, trailer frames, and general fabrication projects requiring robust performance. In stock for Los Angeles pickup. Learn More

This 3-piece Aviation Snip Set includes essential tools for any metal fabricator's toolkit. The set contains a left-cut (red handle), right-cut (green handle), and straight-cut (yellow handle) snip. Featuring hardened steel blades and a compound leverage design, these snips provide maximum cutting power with minimal effort. Ideal for cutting sheet metal in fabrication, HVAC, and roofing projects. In stock Los Angeles. Learn More

Our Spring Loaded Wheel with 3 Casters is an industrial-grade solution for material handling equipment. Engineered to support dynamic load ratings from 200 to 2000 lbs, it provides superior shock absorption and smooth mobility for carts, racks, and dollies. The durable steel construction ensures reliability in demanding warehouse and fabrication environments. Learn More

A36 Hot Rolled Steel Channel, size C6 x 8.2, measuring 6" high with a 1.920" flange and 0.200" web thickness, in 20-foot lengths. Conforming to ASTM A36, this structural channel provides 36,000 PSI minimum yield strength and excellent weldability. Its robust profile is ideal for equipment frames, structural supports, and general fabrication projects. In stock for Los Angeles pickup. Learn More

Versatile 1-1/4" x 1-1/4" x 16GA slotted angle for custom framing and support. This 120" angle is manufactured from commercial steel and features a galvanized coating (per ASTM A653) for excellent corrosion resistance, making it ideal for MRO and fabrication. Learn More

High-performance 120 Grit Zirconia Flap Disc designed for finishing and blending applications. Compliant with ANSI B7.1 safety standards, this 4-1/2" x 7/8" disc provides a long-lasting, consistent cut on steel and other ferrous metals. Rated for a maximum speed of 13,300 RPM. Learn More

6" x 12.5 lbs/ft Hot Rolled Standard I-Beam, available in 20-foot lengths. Made from A36 grade steel, it meets ASTM A36 standards and provides a minimum yield strength of 36,000 PSI. This large structural beam is ideal for building frames, mezzanine supports, and heavy equipment bases due to its excellent load-bearing capacity and weldability. In stock for same-day Los Angeles pickup. Learn More

This 11-inch Face Clamp is a versatile tool for woodworking, welding, and general fabrication. Its large jaw capacity and 2-inch reach provide strong, flush clamping for pocket-hole joinery, butt joints, and assembly tasks. The durable steel construction ensures rigidity and long service life for professional and DIY projects. In stock for same-day pickup in Los Angeles. Learn More

C12 x 30.0 Hot Rolled Steel Channel, measuring 12" in height, 3.170" flange width, and 0.510" web thickness. This A36 structural channel conforms to ASTM A36 and provides a minimum yield strength of 36,000 PSI with excellent weldability. Its large profile is ideal for heavy-duty structural framing, equipment bases, and trailer chassis. In stock for immediate Los Angeles pickup or delivery. Learn More

3/8" x 48" x 120" Hot Rolled Diamond Plate, made from A36 structural steel and conforming to ASTM A786 standards. This heavy-duty plate offers 58,000-80,000 PSI tensile strength and a raised pattern for maximum skid resistance. Its substantial thickness makes it ideal for industrial flooring, heavy equipment ramps, trench covers, and structural walkways. In stock for same-day Los Angeles pickup. Learn More

3/16" thick Hot Rolled Diamond Plate, available in 4' x 10' sheets. Produced from A36 structural steel and conforming to ASTM A786 standards for pattern, this plate provides maximum skid resistance. With a tensile strength of 58,000 PSI and excellent weldability, it is ideal for industrial flooring, ramps, truck beds, and stair treads. In stock for Los Angeles pickup. Learn More

14 Gauge Hot Rolled Diamond Plate, 48" x 120". Conforms to ASTM A786 (pattern) on an A36 steel base. This plate offers 58,000 PSI tensile strength, excellent weldability, and a durable, slip-resistant surface. Ideal for industrial flooring, ramps, truck beds, and stair treads where safety and durability are critical. In stock for same-day Los Angeles pickup. Learn More

26 Gauge Galvanized Corrugated Steel Sheet, 36" wide by 96" long. The G90 zinc coating, applied per ASTM A653, delivers excellent corrosion resistance for outdoor use. Its corrugated profile adds rigidity to the lightweight panel, making it ideal for roofing, siding, fencing, and agricultural barriers where durable weather protection is required. In stock for immediate pickup in Los Angeles. Learn More

1/4" Hot Rolled Diamond Plate (Tread Plate) made from A36 structural steel. This sheet measures 48" x 120" and conforms to ASTM A786 and A36 standards. It features a raised pattern for maximum skid resistance, excellent weldability, and a minimum tensile strength of 58,000 PSI. Ideal for industrial flooring, ramps, and truck beds. In stock Los Angeles. Learn More

12 Gauge Hot Rolled Diamond Plate, 48" x 120" sheet. Made from A36 structural steel conforming to ASTM A786 pattern standards. Features 58,000-80,000 PSI tensile strength, excellent weldability, and a raised pattern for maximum slip resistance. This medium-thickness plate is ideal for industrial flooring, ramps, truck beds, and stair treads. In stock for same-day Los Angeles pickup. Learn More

A 2" x 11 gauge Galvanized Square Tube, available in 24-foot lengths. Manufactured from ASTM A500 Grade B steel, this tube provides a minimum yield strength of 46,000 PSI for structural applications. The hot-dip galvanized zinc coating delivers superior corrosion resistance for outdoor use. Ideal for trailer frames, gates, handrails, and structural supports. In stock in Los Angeles. Learn More

4" x 1/8" 6061-T6 Aluminum Flat Bar, 144" length. Conforms to ASTM B211, offering 45,000 PSI tensile strength, excellent weldability, and corrosion resistance. This large-width bar is ideal for structural applications, including base plates, mounting blocks, and heavy-duty brackets. Its high strength-to-weight ratio makes it a reliable alternative to steel. In stock for immediate Los Angeles pickup. Learn More

Our industrial-grade red DTM paint is a high-performance, oil-based alkyd coating designed for superior corrosion protection. This direct-to-metal formula saves time by eliminating the need for a separate primer, ideal for demanding fabrication and MRO projects. Learn More

This 14 x ¾" Hex Washer Self-Drilling Screw is designed for efficient metal-to-metal fastening. It complies with SAE J78 standards and features a zinc-plated finish per ASTM B633 for corrosion resistance. The integrated neoprene washer ensures a secure, weather-tight seal. Learn More

Industrial Paint 251 is a versatile alkyd-based coating designed for direct-to-metal (DTM) applications. This industrial-grade formula provides excellent corrosion resistance and durability for metal surfaces, meeting key performance criteria. Ideal for both MRO and new fabrication projects. Learn More

Industrial Coating 218 is a high-performance alkyd and epoxy formulation designed for direct-to-metal (DTM) applications. This corrosion-resistant coating provides a durable finish for industrial MRO and fabrication projects, meeting key performance benchmarks. Learn More

This industrial-grade Gloss White paint features advanced Direct-to-Metal (DTM) technology for superior single-coat application. Formulated as a durable alkyd coating, it provides excellent corrosion and weather resistance for demanding MRO and fabrication projects. Learn More

Our Pacific Brown industrial-grade paint features advanced Direct-to-Metal (DTM) technology for superior corrosion protection. This durable alkyd coating is engineered for single-coat application on prepared metal surfaces, ideal for demanding MRO and fabrication projects. Learn More

This industrial-grade, oil-based gray primer provides exceptional adhesion and corrosion resistance for metal surfaces. Formulated as an alkyd coating, it creates a durable foundation for topcoats in demanding fabrication and MRO applications. Learn More

Our Industrial Grade Oil-Based White Primer is a high-solids, alkyd-based coating designed for superior adhesion and corrosion protection on metal surfaces. This direct-to-metal (DTM) primer provides a durable foundation for topcoats in demanding MRO and fabrication applications. Learn More

This industrial-grade, oil-based black primer is engineered for direct-to-metal (DTM) applications, providing a durable foundation for topcoats. Its robust alkyd formulation ensures excellent adhesion and superior corrosion resistance for fabrication and MRO projects. Learn More

This 5” x .040” cut-off wheel is engineered for high-speed cutting of metal. It is an ANSI B7.1 compliant abrasive wheel featuring durable fiberglass reinforcement for safety and performance. Rated for a maximum of 12,200 RPM, it delivers precise, clean cuts in fabrication and MRO applications. Learn More

Our Industrial-Grade Gloss Black DTM Paint is a high-performance alkyd coating designed for direct application on metal. It provides excellent corrosion resistance and a durable, high-gloss finish suitable for demanding fabrication and MRO environments. Learn More

Engineered for durability, this 1/2" x 4-1/2" masonry drill bit features a robust tungsten carbide tip for efficient drilling in concrete, brick, and block. It is manufactured to meet ANSI B212.15 standards, ensuring reliable performance in demanding construction and MRO applications. Learn More

Metalize Industrial Primer is a high-performance alkyd coating engineered for superior corrosion resistance on metal surfaces. Formulated to meet rigorous MIL-SPEC performance criteria, it provides an excellent foundation for DTM (Direct-to-Metal) applications. Ideal for demanding industrial, MRO, and fabrication projects. Learn More

Industrial Coating 251V is a high-performance, direct-to-metal (DTM) alkyd enamel designed for superior corrosion protection. This industrial-grade coating provides a durable, weather-resistant finish for MRO and fabrication applications, formulated to meet MIL-SPEC performance criteria. Learn More

This Heavy Duty Regal Cutter Set includes two robust utility cutters (2-1/2" and 3-7/8") designed for demanding tasks in any workshop or job site. Featuring durable construction and sharp, reliable blades, this set is perfect for cutting a variety of materials with precision and control. An essential tool for fabricators, shippers, and installers. In stock for Los Angeles pickup. Learn More

The Bobco Mini Portable Welding Machine is a versatile dual-voltage (110V/220V) unit designed for stick welding. It is compatible with AWS-certified electrodes from 1/16" to 1/8" in diameter, delivering reliable performance for light fabrication, repair, and MRO tasks. Learn More

This 12" x 7/64" Cut-Off Wheel is an industrial-grade abrasive tool compliant with ANSI B7.1 safety standards. Engineered with fiberglass reinforcement for a maximum speed of 5,100 RPM, it is designed for fast, clean cuts on various metals. The 1" arbor hole fits standard stationary cut-off machines. Learn More

High-performance 4-1/2” x 1/4” grinding disc designed for aggressive material removal. Compliant with ANSI B7.1 safety standards, this fiberglass-reinforced abrasive wheel operates at up to 13,300 RPM. Constructed from durable aluminum oxide for extended life in metal fabrication and MRO tasks. Learn More

This industrial-grade, direct-to-metal (DTM) semi-gloss black paint is an alkyd-based enamel designed for superior corrosion protection. It provides a durable, weather-resistant finish on metal surfaces without requiring a separate primer, making it ideal for MRO and fabrication projects. Learn More

Our Gloss Black DTM Oil-Based Paint is an industrial-grade alkyd coating designed for superior corrosion resistance. This direct-to-metal formula provides a durable, high-gloss finish ideal for demanding MRO and fabrication applications. Learn More

Pacific Brown DTM is a high-performance, oil-based (alkyd) industrial coating designed for direct application to metal. It provides excellent corrosion resistance and a durable finish, making it ideal for demanding MRO and fabrication projects. Learn More

This industrial-grade HP Air Spray Gun features a durable aluminum body, a 1.88mm nozzle, and a 1000cc aluminum cup. Engineered for high-volume application, it provides excellent atomization for industrial primers, topcoats, and DTM coatings meeting MIL-SPEC performance criteria. Learn More

Industrial Hardware Consumable 218 is a high-performance solution for MRO and fabrication. Formulated to meet key industrial performance standards like ASTM C557, this product ensures durability for demanding applications on metal surfaces. Ideal for corrosion protection and general maintenance tasks. Learn More

The C199XL is an industrial-grade ornamental cap rail fitting designed for durability and a precise fit. Engineered from high-quality metals for architectural applications, it is a key component for constructing robust, ADA-compliant handrail systems. Learn More

1-1/2" x 16 Gauge Galvanized Square Tube, sold in 24-foot lengths. Conforms to ASTM A500 Grade B with 58,000 PSI tensile strength. The hot-dip zinc coating provides excellent corrosion resistance for outdoor applications. Its medium size is ideal for trailer frames, gate construction, and structural supports. In stock for same-day Los Angeles pickup. Learn More

This 4” x 1/16” x ⅜” cut-off wheel is an industrial-grade abrasive tool for high-speed cutting. Compliant with ANSI B7.1 safety standards, it features fiberglass reinforcement for enhanced durability and stability at its maximum 22,000 RPM rating. Learn More

This 1/2" x 4-1/2" industrial masonry drill bit is engineered for high-performance drilling in concrete, brick, and block. It features a durable tungsten carbide tip and complies with ANSI B212.15 standards, ensuring precision and long service life for demanding applications. Learn More

This industrial-grade, oil-based DTM paint delivers a durable black semi-gloss finish. Its alkyd enamel formulation provides excellent corrosion resistance and adhesion directly on prepared metal surfaces, making it ideal for fabrication and MRO projects. Learn More

This Safety Yellow industrial coating features advanced Direct-to-Metal (DTM) oil-based alkyd technology for superior adhesion and corrosion protection. It provides a durable, high-visibility finish ideal for MRO and equipment applications, meeting industrial performance benchmarks. Learn More

The C-Scroll (5112A) is a classic decorative element forged from high-quality Class 25-30 gray iron. This architectural-grade component is designed to add an elegant, traditional finish to custom fences, gates, and railings in fabrication projects. Learn More

Style 03/105 decorative cast iron finial designed to fit 5/8" square bars, pickets, or posts. This ornamental component provides a classic, protective spear point finish to iron fences, gates, and railings. The durable cast iron construction is ready for welding and finishing to match your project's specifications. Ideal for fence contractors and ornamental fabricators. In stock for immediate pickup in Los Angeles. Learn More

Our 6-inch rubber roller is an industrial-grade component designed for durability and smooth operation. Constructed from high-traction rubber on a robust core, it is ideal for material handling systems and heavy-duty MRO applications. Learn More

The Eagle-2000-FR is a heavy-duty 1HP slide gate opener engineered for commercial and industrial applications. It reliably moves gates up to 45 feet long and weighing 2000 lbs. This complete kit includes two remotes, a receiver, and an EG111 monitored photo eye for enhanced safety and convenience. Its foot release mechanism ensures easy manual operation during power outages. In stock in Los Angeles. Learn More

This industrial-grade 5/16" x 4-1/2" masonry drill bit is engineered for high-performance drilling in concrete, brick, and block. It features a durable tungsten carbide tip for extended life and precision, manufactured to meet ANSI B212.15 standards. Learn More

Our industrial-grade DTM Clear Coat is a high-performance alkyd coating designed for direct application on metal surfaces. It provides exceptional corrosion resistance and a durable, transparent finish ideal for MRO and fabrication projects. Learn More

The C45 Cap Rail is an industrial-grade ornamental fitting forged from Class 25-30 gray cast iron. It is designed with a 1-¾” width to securely fit over a standard 1-½” rail, providing a durable and decorative finish for handrail and fencing systems. Learn More

The Bobco Auto Darkening Weld Helmet provides superior protection, meeting ANSI/ISEA Z87.1+ standards for impact resistance. It features a large 3.94” x 3.15” viewing area for maximum visibility and is constructed from a lightweight, durable high-impact resistant material. Learn More

1-1/2" wide by 3/16" thick 6061-T6 Aluminum Flat Bar, sold in 144" lengths. Conforming to ASTM B211, this versatile alloy offers 45,000 PSI tensile strength, good machinability, and excellent corrosion resistance. This medium-width bar is ideal for structural bracing, machine ways, and custom fabricated components. In stock for Los Angeles pickup. Learn More

3/8" x 3/4" 6061-T6 Aluminum Flat Bar, sold in 144" lengths. Conforms to ASTM B211 standards, delivering 45,000 PSI tensile strength with good machinability and excellent weldability. This small-width bar is ideal for manufacturing brackets, straps, shims, and small frame components where a high strength-to-weight ratio is essential. In stock for same-day Los Angeles pickup. Learn More

2-1/2" x 2-1/2" 6061-T6 Aluminum Square Bar, sold in 144" lengths. Conforming to ASTM B211, this bar offers high strength with a 45,000 PSI tensile rating, excellent weldability, and superior corrosion resistance. Its large cross-section is ideal for structural framing, heavy-duty machinery bases, and large machined fixtures. In stock for same-day Los Angeles pickup. Learn More

This 3" x 5/8" 6061-T6 Aluminum Flat Bar offers an excellent combination of strength, workability, and corrosion resistance. Conforming to ASTM B211 with a tensile strength of 45,000 PSI, this material is easily machined, welded, and finished. Its medium size is ideal for structural bracing, machine ways, wear strips, and mounting plates where a high strength-to-weight ratio is required. In stock for immediate Los Angeles pickup. Learn More

Our 4-inch Tube Ring is a high-quality decorative component forged from industrial-grade Class 25-30 gray cast iron. Designed for durability and easy integration, it's ideal for ornamental fencing, gates, and architectural fabrication projects. Learn More

Durable 14" brown leather welding gloves engineered for high-heat protection. These industrial-grade gloves meet ANSI/ISEA 105 standards for cut and abrasion resistance, making them ideal for professional welding and fabrication. Learn More

These one-size-fits-all thick cotton gloves offer comfortable, general-purpose hand protection. Made from a durable cotton blend, they are essential Personal Protective Equipment (PPE) for MRO and material handling, adhering to general industrial safety principles like ANSI/ISEA 105. Learn More

The 1-1/2 Inch Post Ball Cap is a high-quality ornamental hardware component designed for fencing and architectural applications. Fabricated from durable Class 25-30 gray iron or A356 aluminum, it provides a classic, finished look to any metal post. This decorative cap is engineered for a precise fit on 1-1/2 inch square or round tubing. Learn More

The 4 Inch Post Ball Cap is a decorative finial designed for fence posts and railings. Crafted from durable Class 25-30 gray iron, it provides a classic architectural finish for ornamental and security fencing projects. This cap is designed to fit standard 4-inch square or round posts. Learn More

A versatile, industrial-grade lacquer thinner for reducing paint viscosity and cleaning metal surfaces. This fast-evaporating solvent ensures optimal paint flow and prepares substrates for DTM coatings. Ideal for use with alkyd and oil-based industrial paints. Learn More

The S-Scroll (5024D) is a decorative hardware element crafted from high-quality Class 25-30 gray iron. Its classic design is ideal for adding architectural detail to fences, gates, and furniture. This industrial-grade component ensures durability and an authentic forged appearance. Learn More

Our 1-1/4 Double Lock Box is a durable gate hardware component crafted from high-strength Class 25-30 gray cast iron. Designed for 1-1/4" square tubing, it provides a secure housing for lock mechanisms in ornamental fences and security gates. Ideal for industrial fabrication and commercial applications. Learn More