Search results for: 'round metsl pipes 5 inches'

Our 12-inch industrial door spring is engineered from high-tensile spring steel for maximum durability and cycle life. Designed to meet ASTM A227/A228 performance standards, it provides reliable tension for heavy-duty commercial and industrial doors. Features a corrosion-resistant zinc-plated finish for long-lasting use. Learn More

This 3/4 Inch Square Plastic Cap is designed for a secure fit on square tubing, providing a clean finish and protection. Made from durable, weather-resistant LDPE plastic, it is ideal for finishing fences, railings, and furniture. It meets general industrial quality standards for non-structural applications. Learn More

This 4-inch V-Groove Wheel Box is an industrial-grade component designed for high-load capacity on sliding gates and doors. Constructed from heavy-duty steel, it ensures smooth, reliable operation on angle iron tracks. Ideal for fabrication and MRO applications. Learn More

The 6-inch V-Groove Wheel Box is an industrial-grade component for heavy-duty track applications. Constructed from durable steel and cast iron, it features high load capacity ratings suitable for large sliding gates and material handling systems. This assembly is designed for reliable, smooth operation on angle iron tracks. Learn More

1-inch diameter Cold Rolled All Thread Rod in a 120-inch length with a zinc plated finish. This rod meets ASTM A307 Grade A strength requirements, with a base material tensile strength of 63,800 PSI. The zinc plating provides good corrosion resistance for general-purpose fastening, anchoring systems, and suspending HVAC fixtures. In stock for immediate Los Angeles pickup. Learn More

This 4-inch V-Groove Wheel is engineered for smooth operation on inverted angle iron tracks. Its forged steel construction provides durability and a high load capacity for sliding gates, industrial carts, and heavy-duty rolling doors. The precision-machined groove ensures accurate alignment and reduced friction. In stock for immediate pickup or delivery in Los Angeles. Learn More

7/8 inch diameter Cold Rolled All Thread Rod in 10-foot lengths. This zinc-plated, low-carbon steel rod meets the strength requirements of ASTM A307 Grade A, with a typical tensile strength of 63,800 PSI. The zinc plating provides moderate corrosion resistance for versatile use. It is ideal for general-purpose fastening, anchoring, and support systems in construction and manufacturing. In stock for immediate Los Angeles pickup. Learn More

1/2" diameter Cold Rolled Steel All Thread Rod with an oil finish, supplied in 120" lengths. Made from low-carbon steel, it meets the strength requirements of ASTM A307 Grade A and offers 63,800 PSI tensile strength. The continuous threading provides versatile fastening for construction, manufacturing, and general repair. In stock for Los Angeles pickup. Learn More

A36 Hot Rolled Steel Flat Bar measuring 2-1/2 inches wide by 1 inch thick, sold in 20-foot lengths. This structural steel meets ASTM A36 standards and provides a minimum yield strength of 36,000 PSI. Its excellent weldability and good formability make it a top choice for fabrication. This medium-sized bar is ideal for structural bracing, equipment frames, and general repairs. In stock and available for pickup in Los Angeles. Learn More

2 Inch by 3/16 Inch Hot Rolled Steel Flat Bar, 240 inches long. Made from A36 structural steel, conforming to ASTM A36 specifications. This bar offers a minimum yield strength of 36,000 PSI and excellent weldability for easy fabrication. Its medium width is ideal for structural bracing, machine ways, wear strips, and general repairs. In stock and available for same-day pickup in Los Angeles. Learn More

Durable 2 Inch Post Newell Caps designed for finishing square tubing posts. Fabricated from high-grade Class 25-30 cast iron, these caps provide a protective, decorative finish for fences, gates, and railings. Ideal for architectural and ornamental metalwork. Learn More

A36 Hot Rolled Steel Flat Bar measuring 4 inches wide by 1/8 inch thick, in a 240-inch length. This structural steel conforms to ASTM A36 and provides a minimum yield strength of 36,000 PSI. Its excellent weldability and formability make it a versatile choice. The large width is ideal for manufacturing base plates, heavy structural supports, and frame components. In stock for Los Angeles pickup. Learn More

A36 Hot Rolled Steel Flat Bar, measuring 6 inches wide by 1/8 inch thick in a 240-inch length. This versatile structural steel conforms to ASTM A36 standards, offering a minimum yield strength of 36,000 PSI and excellent weldability. Its large width makes it ideal for manufacturing base plates, heavy equipment mounting, structural bracing, and general fabrication projects. In stock for same-day Los Angeles pickup. Learn More

A36 Hot Rolled Steel Flat Bar measuring 10 inches wide by 3/8 inch thick, in 240-inch (20-foot) lengths. This structural bar conforms to ASTM A36 and provides a minimum yield strength of 36,000 PSI with excellent weldability. Its large width makes it ideal for heavy structural components, base plates for machinery, and die components. In stock for immediate cutting and pickup in Los Angeles. Learn More

A36 Hot Rolled Steel Flat Bar, 10 inches wide by 1/4 inch thick, in a 240-inch (20-foot) length. This structural steel conforms to ASTM A36 specifications and offers a minimum yield strength of 36,000 PSI with excellent weldability. Its substantial width makes it ideal for heavy-duty applications like base plates, structural supports, and heavy equipment fabrication. In stock for same-day Los Angeles pickup. Learn More

A36 Hot Rolled Steel Flat Bar, 3 inches wide by 3/8 inch thick. Conforms to ASTM A36 standards with a minimum yield strength of 36,000 PSI and excellent weldability for easy fabrication. Its medium size is ideal for structural braces, equipment mounts, base plates, and general repairs. In stock for Los Angeles pickup. Learn More

4 Inch by 3/8 Inch Hot Rolled Steel Flat Bar, 240-inch length. Conforms to ASTM A36 specifications, providing 36,000 PSI minimum yield strength and excellent weldability for structural applications. This large-format bar is ideal for manufacturing base plates, heavy structural supports, die components, and general fabrication projects. In stock and ready for same-day pickup in Los Angeles. Learn More

A36 Hot Rolled Steel Flat Bar, 2-1/2 inches wide by 1/2 inch thick, in a 240-inch length. Conforming to ASTM A36, this bar provides a minimum yield strength of 36,000 PSI and excellent weldability for structural applications. Its medium size is ideal for structural bracing, equipment frames, base plates, and general fabrication projects. In stock for same-day Los Angeles pickup. Learn More

This 1/2 Inch Square Plastic Cap is made from durable, weather-resistant Low-Density Polyethylene (LDPE). It provides a secure, friction-fit for finishing square tubing, protecting against sharp edges and internal contamination in fabrication and MRO applications. Learn More

1 inch by 1/8 inch A36 Hot Rolled Steel Flat Bar, 240-inch length. Conforming to ASTM A36, this bar offers a minimum yield strength of 36,000 PSI and excellent weldability for structural applications. Its medium size is ideal for support braces, frame components, and general repair work. In stock for immediate cutting and pickup in Los Angeles. Learn More

3 Inch by 1/4 Inch Hot Rolled Steel Flat Bar, 240-inch length. A versatile and economical structural steel conforming to ASTM A36 standards. This material offers a minimum yield strength of 36,000 PSI and excellent weldability, making it ideal for fabrication. Its medium size is perfect for structural bracing, machine ways, base plates, and general repairs. In stock and ready for same-day pickup in Los Angeles. Learn More

Durable 1-1/2 inch square plastic cap designed for a secure fit on square tubing. Made from high-quality, weather-resistant Low-Density Polyethylene (LDPE), this cap provides a clean, finished appearance and protects against debris. Learn More

4 Inch x 3/16 Inch A36 Hot Rolled Steel Flat Bar. This structural steel bar conforms to ASTM A36 and features a minimum yield strength of 36,000 PSI with excellent weldability. The large 4-inch width is ideal for heavy-duty applications including structural base plates, trailer frames, equipment mounting, and general fabrication projects requiring robust support. In stock and ready for same-day pickup in Los Angeles. Learn More

This 4” x 1/16” x ⅜” cut-off wheel is an industrial-grade abrasive tool for high-speed cutting. Compliant with ANSI B7.1 safety standards, it features fiberglass reinforcement for enhanced durability and stability at its maximum 22,000 RPM rating. Learn More

The 1-1/4 Inch Square Plastic Cap provides a clean, finished look for square tubing applications. Made from durable, weather-resistant black plastic, it protects against sharp edges and internal debris. This cap offers a secure press-fit for reliability in fencing, furniture, and equipment fabrication. Learn More

This 6 Inch Solid V-Groove Wheel is engineered for high-capacity applications, supporting loads up to 2000 lbs. Manufactured from solid steel to industrial standards, it provides durable and reliable performance on angle iron tracks for gates and carts. Learn More

10 inch by 1/2 inch A36 Hot Rolled Steel Flat Bar, available in 20-foot lengths. This structural steel conforms to ASTM A36 specifications, providing a minimum yield strength of 36,000 PSI and excellent weldability. Its large width makes it an ideal choice for heavy-duty applications such as machinery base plates, structural supports, die components, and trailer frames. In stock for Los Angeles pickup. Learn More

This 6" x .040" x 7/8" Cut-Off Wheel is an industrial-grade abrasive cutting disc designed for high-speed cutting. Compliant with ANSI B7.1 safety standards, it features fiberglass reinforcement for enhanced durability and operator safety. Ideal for cutting steel, iron, and other metals. Learn More

1 Inch by 3/16 Inch A36 Hot Rolled Steel Flat Bar, sold in 20-foot lengths. This structural steel conforms to ASTM A36 and provides a minimum yield strength of 36,000 PSI with excellent weldability and formability. Its medium size is ideal for structural bracing, equipment frames, and general fabrication projects requiring reliable strength and durability. In stock for same-day Los Angeles pickup. Learn More

This 2 inch by 3/8 inch A36 Hot Rolled Steel Flat Bar is a versatile structural steel that conforms to ASTM A36. It offers a minimum yield strength of 36,000 PSI and excellent weldability and formability. Its medium size is ideal for structural bracing, machine ways, base plates, and general fabrication projects requiring strength and durability. In stock and available for same-day pickup in Los Angeles. Learn More

The 1/4" Cobalt Drill Bit is engineered from M35 steel with 5% cobalt for exceptional heat resistance up to 1100°F. Its 135° split-point geometry ensures precise, walk-free starts and efficient drilling in hard materials like stainless steel and cast iron. Learn More

1-1/2 inch wide by 1/4 inch thick Hot Rolled Steel Flat Bar. Manufactured from A36 carbon structural steel, this bar meets ASTM A36 standards and offers a minimum yield strength of 36,000 PSI. Its excellent weldability and good machinability make it ideal for structural bracing, machine ways, supports, and general fabrication projects. In stock and ready for same-day pickup in Los Angeles. Learn More

This 4-inch V-Groove Wheel is machined from solid steel for maximum durability and load capacity. The V-groove is engineered for smooth operation on inverted angle iron track, making it the ideal choice for heavy sliding gates, industrial doors, and material handling carts. Its robust construction ensures reliable performance in demanding applications. In stock for same-day pickup in Los Angeles. Learn More

This Safety Yellow industrial coating features advanced Direct-to-Metal (DTM) oil-based alkyd technology for superior adhesion and corrosion protection. It provides a durable, high-visibility finish ideal for MRO and equipment applications, meeting industrial performance benchmarks. Learn More

A36 Hot Rolled Steel Flat Bar measuring 4-1/2 inches wide by 1/2 inch thick. This structural steel bar conforms to ASTM A36 specifications and offers a minimum yield strength of 36,000 PSI with excellent weldability. Its substantial size makes it ideal for fabricating heavy-duty base plates, structural supports, trailer frames, and industrial brackets. In stock and available for same-day pickup in Los Angeles. Learn More

Galvanized PBR sheet, 26 Gauge x 36 inches x 168 inches. Conforms to ASTM A653. Features a protective zinc coating for excellent corrosion resistance. The PBR (Purlin-Bearing Rib) profile provides structural strength for roofing and siding. Lightweight and durable, it's ideal for agricultural, commercial, and residential buildings. In stock Los Angeles. Learn More

A36 Hot Rolled Steel Angle, 4" x 4" x 3/8" in 20 ft (240") lengths. Conforms to ASTM A36, providing a minimum yield strength of 36,000 PSI with excellent weldability and fabrication characteristics. The large 4-inch legs are ideal for heavy structural applications, building frames, equipment bases, and industrial supports. In stock and available for same-day pickup in Los Angeles. Learn More

26 Gauge Galvanized Steel PBR (Purlin Bearing Rib) panel, 36 inches wide by 192 inches (16 ft) long. Conforms to ASTM A653, offering excellent corrosion resistance from its protective zinc coating. Ideal for commercial roofing, agricultural siding, and residential projects, providing a durable, low-maintenance exterior. In stock for same-day pickup in Los Angeles. Learn More

3" x 3" x 1/4" A36 Hot Rolled Steel Angle, sold in 240" lengths. Conforming to ASTM A36, this structural angle provides a minimum 36,000 PSI yield strength and excellent weldability. The 3-inch leg size is ideal for medium-duty structural framing, equipment bases, shelving, and general fabrication projects requiring robust support. In stock and available for same-day pickup in Los Angeles. Learn More

26 Gauge Galvanized Steel PBR Panel, measuring 36 inches wide by 288 inches (24 feet) long. Produced to ASTM A653 standards, this panel offers excellent corrosion resistance from its protective zinc coating. The PBR (Purlin Bearing Rib) profile provides structural strength, making it ideal for roofing, siding, and agricultural building applications where durability and weather resistance are required. In stock for Los Angeles pickup. Learn More

26 Gauge Galvanized Steel PBR (Purlin Bearing Rib) Sheet, measuring 36 inches wide by 96 inches long. Conforms to ASTM A653, offering excellent corrosion resistance from its protective zinc coating. The base steel provides a minimum 36,000 PSI yield strength for structural integrity. Ideal for residential roofing, commercial siding, and agricultural building applications. In stock and ready for pickup in Los Angeles. Learn More

26 Gauge Galvanized Corrugated Steel Sheet, measuring 36 inches in nominal width by 120 inches in length. Conforms to ASTM A653 specifications with a G90 zinc coating for excellent corrosion resistance. This lightweight, durable panel is ideal for roofing, siding, agricultural buildings, and decorative applications. Its corrugated profile adds rigidity. In stock for immediate pickup in Los Angeles. Learn More

24 Gauge Galvanized Steel B-Deck measuring 36 inches wide by 120 inches long. This structural panel conforms to ASTM A653, providing excellent corrosion resistance from its protective zinc coating. With a high strength-to-weight ratio, it is an economical solution for roofing, siding, and floor decking systems. Ideal for residential, commercial, and agricultural construction. In stock for immediate Los Angeles pickup. Learn More

A36 Hot Rolled Steel Flat Bar, 1" wide by 3/8" thick in a 240-inch length. This general-purpose structural steel conforms to ASTM A36, offering a minimum yield strength of 36,000 PSI and excellent weldability. Its medium width is ideal for structural bracing, machine ways, support brackets, and general fabrication projects. In stock for same-day Los Angeles pickup. Learn More

A36 Hot Rolled Steel Channel, C5 x 6.7, measuring 5" in depth with a 0.190" web thickness. Conforms to ASTM A36 with a minimum yield strength of 36,000 PSI. This large structural channel offers excellent weldability and strength for equipment frames, vehicle chassis, and building supports. Stocked in 20-foot lengths for same-day pickup in Los Angeles. Learn More

6" x 1/4" A36 Hot Rolled Steel Flat Bar, sold in 240" (20 ft) lengths. Conforming to ASTM A36, this structural steel offers a minimum yield strength of 36,000 PSI and excellent weldability. The large 6-inch width is ideal for manufacturing machinery base plates, heavy structural braces, and trailer frame components. In stock for same-day Los Angeles pickup. Learn More

26 Gauge Galvanized Corrugated Steel Sheet, measuring 36 inches in width by 144 inches in length. Produced via a continuous hot-dip process to ASTM A653 specifications with a G90 zinc coating for excellent rust prevention. This lightweight and formable sheet is ideal for roofing, siding, and agricultural buildings. In stock and available for same-day pickup in Los Angeles. Learn More

The 1/8" Cobalt Drill Bit is engineered from M35 steel with 5% cobalt for superior heat resistance when drilling hard metals. Featuring a 135° split-point geometry for precision, it is ideal for stainless steel and cast iron applications compliant with ANSI/ASME B94.11M standards. Learn More

2" x 3/4" Hot Rolled Steel Flat Bar in 240-inch lengths. Made from A36 structural steel, this bar conforms to ASTM A36 standards and provides a minimum yield strength of 36,000 PSI. Its excellent weldability and formability make it a versatile choice for a wide range of applications, including structural bracing, machinery mounting plates, and general fabrication. In stock for Los Angeles pickup. Learn More

This 1/4" x 4-1/4" Cobalt Industrial Drill Bit is engineered from M35 steel with 5% cobalt for superior heat resistance. Conforming to ANSI/ASME B94.11M standards, its 135° split-point tip ensures precise starts and is ideal for drilling into stainless steel and cast iron. Learn More

A36 Hot Rolled Steel Angle measuring 6 inches by 4 inches with a 3/8 inch thickness. This structural angle conforms to ASTM A36 standards and offers a minimum yield strength of 36,000 PSI. Its large dimensions make it ideal for heavy structural framing, building supports, and industrial equipment manufacturing. Excellent weldability allows for easy fabrication. In stock and available for same-day pickup in Los Angeles. Learn More

This 3/16" x 4-1/4" industrial cobalt drill bit is engineered from M35 steel (5% cobalt) for superior heat resistance. Its 135° split-point tip ensures precise, no-walk starts on hard materials like stainless steel and cast iron. Manufactured to meet industrial performance standards for durability and accuracy. Learn More

1-1/4" x 1/2" A36 Hot Rolled Steel Flat Bar, sold in 240-inch (20 ft) lengths. This structural steel conforms to ASTM A36 and provides a minimum yield strength of 36,000 PSI. Its excellent weldability and formability make it a versatile choice for general fabrication. This medium-width bar is ideal for structural bracing, equipment frames, and base plates. In stock for Los Angeles pickup. Learn More

A36 Hot Rolled Steel Flat Bar, 1-1/2" wide by 3/16" thick, in 240-inch lengths. Conforms to ASTM A36 with 36,000 PSI minimum yield strength. This low-carbon steel offers excellent weldability and good formability. As a medium-width bar, it is ideal for structural bracing, equipment frames, base plates, and general fabrication projects. In stock for immediate Los Angeles pickup. Learn More

3/4" x 1/4" A36 Hot Rolled Steel Flat Bar, sold in 240-inch (20-foot) lengths. Conforms to ASTM A36 with a minimum yield strength of 36,000 PSI. This versatile and economical steel bar offers excellent weldability and formability. Its small profile is ideal for manufacturing support brackets, straps, shims, and general fabrication projects. In stock for same-day Los Angeles pickup. Learn More

1/2" x 1/2" A36 Hot Rolled Steel Square Bar, 240" length. Conforms to ASTM A36 with 36,000 PSI minimum yield strength and excellent weldability. Its balance of strength and cost-effectiveness makes it a foundational material for fabrication. The medium 1/2" size is ideal for equipment frames, support braces, and structural repairs. In stock for Los Angeles pickup. Learn More

A versatile 2 Inch by 3/8 Inch 304 Stainless Steel Flat Bar, 144 inches long. This bar meets ASTM A276 standards and offers an excellent combination of corrosion resistance, strength, and weldability with a tensile strength of 73,200 PSI. Its medium width makes it ideal for structural bracing, machine ways, framework, and food processing equipment. Available for same-day pickup in Los Angeles. Learn More

This 1018 Cold Rolled Flat Bar measures 6 inches wide by 3/16 inch thick, in a 144-inch length. Conforming to ASTM A108, it provides a smooth, scale-free surface, tight dimensional tolerances, and excellent machinability. Its 63,800 PSI tensile strength makes it ideal for manufacturing base plates, heavy structural bracing, and die components. In stock for same-day Los Angeles pickup. Learn More

This 10" x 1/8" x 1" abrasive cut-off wheel is engineered for high-speed metal cutting applications. Featuring fiberglass reinforcement for durability and safety, it is fully compliant with ANSI B7.1 standards. Designed for tools operating at or below a maximum speed of 6,100 RPM. Learn More

304 Stainless Steel Flat Bar, 2 inches wide by 1/4 inch thick, in a 144-inch length. This versatile bar conforms to ASTM A276, offering excellent corrosion resistance and 73,200 PSI tensile strength. Its medium size is ideal for structural bracing, equipment framework, and architectural trim. Excellent weldability and ductility make it a top choice for fabrication projects. In stock for Los Angeles pickup. Learn More

1-1/2" Single Lock Box constructed from durable, weldable steel. Designed for securing slide or swing gates, this hardware fits 1-1/2" square or round tubing. The weld-on design ensures a permanent, secure installation for standard gate locks. Ideal for residential, commercial, and industrial fence applications. In stock for immediate pickup in Los Angeles. Learn More

Protect your hands with our industrial-grade Goat Leather Driving Gloves. These gloves are rated to ANSI/ISEA 105 standards, providing excellent dexterity and durability for material handling. The premium goat leather construction ensures a comfortable fit and reliable protection for MRO and fabrication tasks. Learn More

12 inch by 3/8 inch A36 Hot Rolled Steel Flat Bar, 240-inch length. Conforms to ASTM A36 with 36,000 PSI minimum yield strength and excellent weldability. This large-format structural bar is ideal for heavy-duty applications like base plates, structural supports, die components, and equipment frames where strength and rigidity are critical. In stock Los Angeles. Learn More

This industrial-grade construction adhesive provides a high-strength bond for a wide range of materials. Compliant with ASTM C557 standards, it is engineered for reliability in demanding construction, fabrication, and MRO applications. Learn More

304 Stainless Steel Flat Bar with a 3-inch width and 1/8-inch thickness, sold in 144-inch lengths. Conforming to ASTM A276, this bar provides 73,200 PSI tensile strength, excellent corrosion resistance, and superior weldability. Its versatile size is ideal for structural braces, equipment framework, base plates, and general fabrication projects. In stock for immediate pickup in Los Angeles. Learn More

26 Gauge Galvanized PBR Steel Sheet, measuring 36 inches wide by 120 inches long. Conforming to ASTM A653, this panel features a protective zinc coating for excellent corrosion resistance. With a base steel yield strength of 36,000 PSI, it's ideal for roofing, siding, and agricultural structures. Its lightweight profile simplifies installation. In stock for Los Angeles pickup. Learn More

1" diameter Cold Rolled All Thread Rod in 120" (10 ft) lengths. Made from 1018 steel with an oil finish for rust prevention, this rod meets ASTM A307 Grade A strength requirements with a 60,000 PSI tensile strength. The continuous threading provides versatile fastening for construction, manufacturing, and general repair. Easily cut to custom lengths. In stock for Los Angeles pickup. Learn More

This 6061-T6 Aluminum Flat Bar measures 1 inch wide by 3/16 inch thick in a 144-inch length. Conforming to ASTM B211, it combines high strength (45,000 PSI tensile) with excellent machinability and corrosion resistance. The T6 temper indicates it is heat-treated for maximum strength. This versatile size is ideal for structural bracing, machine ways, and custom mounting plates. In stock Los Angeles. Learn More

1/2 Inch x 1 Inch 6061-T6 Aluminum Flat Bar, 144" length. Conforms to ASTM B211, offering a versatile combination of 45,000 PSI tensile strength, good machinability, and excellent corrosion resistance. This heat-treatable grade is ideal for structural framing, base plates, and machined components where strength and light weight are required. In stock for same-day Los Angeles pickup. Learn More

A36 Hot Rolled Steel Square Bar measuring 3/8" x 3/8" in 20-foot lengths. Conforming to ASTM A36, this bar provides a minimum yield strength of 36,000 PSI and excellent weldability for general purpose applications. Its small profile is ideal for light framing, support brackets, railings, and industrial maintenance repairs. In stock for Los Angeles pickup. Learn More

A 3/16" x 4" Cold Rolled 1018 Steel Flat Bar, 144 inches long. Produced to ASTM A108 standards, this bar provides a tensile strength of 63,800 PSI, tight dimensional tolerances, and excellent machinability. The smooth, scale-free surface is ideal for applications requiring a clean finish. Suitable for base plates, structural components, and machine parts. In stock Los Angeles. Learn More

1 inch 1018 Cold Rolled Steel Hexagon Bar, 144-inch length. Conforms to ASTM A108 standards, delivering 63,800 PSI tensile strength and excellent machinability. Its smooth finish and tight tolerances make it ideal for fasteners, nuts, hydraulic fittings, and machined components requiring a hex shape for gripping. In stock for same-day Los Angeles pickup. Learn More

Our 7-inch barrel hinges are engineered from heavy-duty, weldable carbon steel for maximum durability and strength. Designed for high-load applications, these hinges provide a smooth, reliable pivot for industrial gates and security doors. The robust construction ensures long-lasting performance in demanding MRO and fabrication environments. Learn More

This 6 inch by 3/8 inch 1018 Cold Rolled Steel Flat Bar offers tight dimensional tolerances and a smooth, scale-free surface. Conforming to ASTM A108, it has a tensile strength of 63,800 PSI and excellent machinability. Its large width makes it ideal for base plates, structural gussets, and heavy equipment mounting. In stock for Los Angeles pickup. Learn More

Our 9-inch barrel hinges are engineered from high-strength, weldable steel for superior durability. Designed for heavy-duty industrial gates, doors, and security applications, these hinges provide smooth, reliable operation. The plateless design allows for direct, clean welding to frames and posts. Learn More

4 inch x 1/4 inch 6061-T6 Aluminum Flat Bar, 144-inch length. Conforming to ASTM B211, this versatile alloy combines 45,000 PSI tensile strength with good machinability and excellent corrosion resistance. The T6 temper provides optimal strength for structural applications. This large width is ideal for base plates, heavy structural components, and die components. In stock for immediate Los Angeles pickup. Learn More

4" x 1-1/2" Hot Rolled Steel Rectangular Tube with a 0.065" wall, manufactured to ASTM A500 Grade B specifications. This structural grade tubing offers a minimum 46,000 PSI yield strength and excellent weldability, making it ideal for fabrication. Its high strength-to-weight ratio is perfect for trailer frames, structural supports, and machine bases. In stock for immediate Los Angeles pickup. Learn More

This 7" x 1.6mm cut-off wheel features a 7/8" arbor hole, making it compatible with most standard angle grinders. Rated for a maximum speed of 8,500 RPM, this abrasive disc is engineered for fast, burr-free cutting of steel, stainless steel, and other ferrous metals. Its thin kerf design minimizes material waste and provides a clean finish. Ideal for fabrication and metalworking shops. In stock Los Angeles. Learn More

3" x 3" x 3/8" Hot Rolled Steel Angle, sold in 240-inch lengths. Conforms to ASTM A36 with a minimum yield strength of 36,000 PSI. This structural angle provides excellent weldability and good machinability. Its medium size is ideal for equipment bases, structural framing, and heavy-duty shelving supports. In stock for Los Angeles pickup. Learn More

The Super Tool Press Pliers 10" are engineered from high-strength forged alloy steel for superior gripping power and durability. Designed to meet ASME B107 standards, these industrial-grade pliers are essential for demanding fabrication and MRO tasks. Learn More

1" x 1" x 3/16" 304 Stainless Steel Angle in a 240-inch length. Conforming to ASTM A276, this material provides excellent corrosion resistance and weldability with a tensile strength of 73,200 PSI. Its small profile is ideal for light structural support, custom brackets, architectural trim, and equipment framing where both strength and a clean finish are required. In stock for immediate Los Angeles pickup. Learn More

2" x 2" x 3/16" 304 Stainless Steel Angle, available in 240-inch lengths. Conforming to ASTM A276, this angle provides 73,200 PSI tensile strength, excellent corrosion resistance, and superior weldability. Its medium size is ideal for structural framing, equipment bases, shelving, and architectural trim. A fundamental component for fabrication projects requiring both strength and a clean finish. In stock for Los Angeles pickup. Learn More

1-1/4" x 1-1/4" x 3/16" 304 Stainless Steel Angle, sold in 240-inch lengths. Conforming to ASTM A276, this versatile austenitic grade offers excellent corrosion resistance and weldability with a tensile strength of 73,200 PSI. Its small profile is ideal for creating light structural frames, mounting brackets, corner guards, and architectural trim. In stock for Los Angeles pickup. Learn More

Secure equipment and materials with the Regal 2” x 20ft Ratchet Cargo Lash. This industrial tie-down is made from durable polyester webbing, meets WSTDA-T-1 standards, and features a 3,335 lbs Working Load Limit (WLL) for reliable performance. Learn More

This 1/2" x 4-1/2" industrial masonry drill bit is engineered for high-performance drilling in concrete, brick, and block. It features a durable tungsten carbide tip and complies with ANSI B212.15 standards, ensuring precision and long service life for demanding applications. Learn More

8" x 1/2" A36 Hot Rolled Steel Flat Bar, 240" length. Conforms to ASTM A36 with a minimum yield strength of 36,000 PSI and excellent weldability. This large-format flat bar is ideal for manufacturing heavy structural components, base plates for machinery and columns, and general fabrication where strength and durability are critical. In stock and available for same-day pickup in Los Angeles. Learn More

1-1/2" x 1/4" 304 Stainless Steel Angle in 240-inch lengths. Conforming to ASTM A276, this versatile angle provides 73,200 PSI tensile strength, excellent corrosion resistance, and superior weldability. Its medium size is ideal for structural framing, equipment bases, shelving, and architectural trim. A non-magnetic, austenitic steel perfect for fabrication projects requiring durability and a clean finish. In stock for immediate Los Angeles pickup. Learn More

12" x 1/2" A36 Hot Rolled Steel Flat Bar, 240" length. Conforms to ASTM A36 with a minimum yield strength of 36,000 PSI. This large-format structural bar offers excellent weldability and good machinability. Ideal for heavy-duty applications like base plates, structural supports, die components, and equipment frames. In stock for same-day Los Angeles pickup. Learn More

A36 Hot Rolled Steel Flat Bar, 1-1/2" wide by 1/8" thick. This general-purpose structural steel conforms to ASTM A36 standards and offers a minimum yield strength of 36,000 PSI with excellent weldability. Its medium width is ideal for fabricating structural bracing, equipment frames, machine ways, and general repair work. Stocked in 240" (20 ft) lengths for immediate pickup in Los Angeles. Learn More

1-1/4" x 3/8" A36 Hot Rolled Steel Flat Bar, sold in 20-foot (240") lengths. Conforms to ASTM A36 specifications, providing a minimum yield strength of 36,000 PSI and excellent weldability. This versatile structural steel is ideal for general fabrication, support bracing, industrial maintenance, and trailer frames. The hot rolled finish has a distinctive mill scale. In stock for same-day Los Angeles pickup. Learn More

1-1/4" x 1-1/4" Galvanized Square Tube with a 16 gauge wall, sold in 24-foot lengths. Manufactured to ASTM A500 Grade B standards, this structural tubing has a 58,000 PSI tensile strength. The hot-dip galvanized zinc coating provides excellent corrosion resistance for outdoor applications. Ideal for structural frames, gates, trailer construction, and railings. In stock for Los Angeles pickup. Learn More

This industrial-grade Safety Yellow DTM (Direct-to-Metal) paint provides exceptional corrosion protection in a single coat. Formulated as a high-performance alkyd coating, it's engineered for durability on steel and other metal surfaces. Ideal for MRO and new fabrication projects. Learn More

6" x 1/2" 1018 Cold Rolled Steel Flat Bar, 144" length. Conforms to ASTM A108 with 63,800 PSI tensile strength and excellent machinability. The cold drawing process provides tight dimensional tolerances and a smooth, scale-free finish. Its substantial 6-inch width makes it ideal for base plates, heavy structural components, and die sets. In stock for Los Angeles pickup. Learn More

1-1/2" x 16 Gauge Galvanized Square Tube, sold in 24-foot lengths. Conforms to ASTM A500 Grade B with 58,000 PSI tensile strength. The hot-dip zinc coating provides excellent corrosion resistance for outdoor applications. Its medium size is ideal for trailer frames, gate construction, and structural supports. In stock for same-day Los Angeles pickup. Learn More

1" thick A36 Hot Rolled Steel Plate, 48" x 120". Conforms to ASTM A36 with 36,000 PSI minimum yield strength. This structural plate offers excellent weldability and good machinability. Its large thickness makes it ideal for heavy-duty applications like column base plates, heavy equipment mounting, wear plates, and general fabrication projects requiring robust support. In stock and ready for custom cutting or pickup in Los Angeles. Learn More

3/4 inch diameter Cold Rolled All Thread Rod in a 120-inch length with a zinc-plated finish for corrosion resistance. Manufactured from low-carbon steel, its strength conforms to ASTM A307 Grade A with a typical tensile strength of 63,800 PSI. This versatile, continuously threaded rod is ideal for general-purpose fastening, bracing, and anchoring applications in construction and industrial settings. In stock Los Angeles. Learn More

A 2" x 11 gauge Galvanized Square Tube, available in 24-foot lengths. Manufactured from ASTM A500 Grade B steel, this tube provides a minimum yield strength of 46,000 PSI for structural applications. The hot-dip galvanized zinc coating delivers superior corrosion resistance for outdoor use. Ideal for trailer frames, gates, handrails, and structural supports. In stock in Los Angeles. Learn More

A36 Hot Rolled Steel Angle measuring 6" x 6" with a 3/8" thickness. This structural shape conforms to ASTM A36 standards, delivering a minimum yield strength of 36,000 PSI and excellent weldability for robust joints. Its large size is ideal for heavy-duty applications including building frames, industrial equipment bases, and trailer manufacturing. In stock for Los Angeles pickup. Learn More

1/2" thick A36 Hot Rolled Steel Plate, 48" x 120". A structural carbon steel conforming to ASTM A36, it provides a guaranteed minimum yield strength of 36,000 PSI and excellent weldability. This heavy-gauge plate is ideal for manufacturing column base plates, heavy equipment mounting pads, gussets, and other demanding structural applications where strength and durability are critical. In stock for immediate Los Angeles pickup. Learn More

3" x 3" x 3/16" Hot Rolled Steel Angle, 240" length. Conforms to ASTM A36 with a minimum 36,000 PSI yield strength and excellent weldability. This medium-sized structural angle provides robust support for equipment bases, framing, and general fabrication. Its hot rolled finish has a mill scale surface. In stock for same-day Los Angeles pickup. Learn More