Search results for: '20 foot low guage metal building siding'

Bobco's 217B is an industrial-grade, direct-to-metal (DTM) alkyd enamel designed for superior corrosion protection on steel and iron surfaces. This high-performance coating is ideal for demanding MRO and fabrication applications, providing a durable, weather-resistant finish. Learn More

This 3/8 inch diameter Cold Rolled All Thread Rod is supplied in a 10 foot length with a zinc-plated finish for moderate corrosion resistance. Made from low-carbon steel, it meets the strength requirements of ASTM A307 Grade A, providing a typical tensile strength of 63,800 PSI. Its continuous threading makes it ideal for versatile fastening, anchoring, bracing, and support applications. In stock for Los Angeles pickup. Learn More

12 Gauge (0.105") Galvanized Steel Sheet, 48" x 120". This sheet conforms to ASTM A653 and features a protective zinc coating applied via a hot-dip process for excellent corrosion resistance. Its medium thickness provides a balance of strength and formability, making it ideal for structural panels, HVAC ductwork, automotive components, and outdoor enclosures. In stock for same-day Los Angeles pickup. Learn More

3/16" 1018 Cold Rolled Steel Hex Bar in 144" lengths. Produced to ASTM A108 specifications, this bar offers a 63,800 PSI tensile strength, tight dimensional tolerances, and a clean, smooth surface finish. Its good machinability makes it ideal for producing small fasteners, fittings, and precision hardware. In stock for Los Angeles pickup. Learn More

2" x 2" Hot Rolled Steel Square Tube with a 0.065" wall thickness, sold in 240" (20 ft) lengths. This A500 Grade B structural tubing offers 58,000 PSI tensile strength and excellent weldability per ASTM A500. Its high strength-to-weight ratio makes it ideal for trailer frames, equipment bases, and general fabrication. In stock for Los Angeles pickup. Learn More

A36 Hot Rolled Steel Angle with 6" x 6" legs, 5/16" thickness, and a 240" length. Conforming to ASTM A36, this structural angle provides a minimum yield strength of 36,000 PSI and excellent weldability for demanding applications. Its large profile makes it ideal for heavy structural frames, building columns, equipment bases, and industrial supports. In stock for immediate Los Angeles pickup. Learn More

Our L-Clip Welding Tab is an essential component for professional fabrication. Made from high-quality, weldable low-carbon steel, this 1-1/2 x 1-1/2 tab ensures clean weld starts and strong temporary connections, designed for use in processes compliant with AWS/ASME standards. Learn More

The 1” x 3” Flower Welding Tab is a decorative and functional component for custom metal fabrication. Precision cut from 1/8” thick weldable mild steel, it provides a reliable mounting point for ornamental gates, fences, and furniture. Ideal for projects requiring both strength and aesthetic appeal. Learn More

1/2" diameter Cold Rolled Steel All Thread Rod with an oil finish, supplied in 120" lengths. Made from low-carbon steel, it meets the strength requirements of ASTM A307 Grade A and offers 63,800 PSI tensile strength. The continuous threading provides versatile fastening for construction, manufacturing, and general repair. In stock for Los Angeles pickup. Learn More

Industrial Paint 251 is a versatile alkyd-based coating designed for direct-to-metal (DTM) applications. This industrial-grade formula provides excellent corrosion resistance and durability for metal surfaces, meeting key performance criteria. Ideal for both MRO and new fabrication projects. Learn More

A36 Hot Rolled Steel Angle measuring 1-1/2" x 1-1/2" with a 1/4" thickness, in a 20-foot (240") length. This general-purpose structural steel conforms to ASTM A36, offering a minimum yield strength of 36,000 PSI and excellent weldability. Its medium size is ideal for structural framing, equipment manufacturing, and industrial shelving where reliable strength is required. In stock for Los Angeles pickup. Learn More

4" x 4" x 1/2" A36 Hot Rolled Steel Angle, 240" length. This structural angle provides a minimum 36,000 PSI yield strength and excellent weldability, conforming to ASTM A36. Its large size is ideal for heavy structural applications, including building frames, equipment bases, and industrial supports. The hot rolled finish has a mill scale surface. In stock and available for Los Angeles pickup. Learn More

5" x 3" x 1/4" Hot Rolled Steel Angle, 240" length. This A36 structural angle meets ASTM A36 specifications and provides a minimum yield strength of 36,000 PSI. Its robust dimensions make it ideal for heavy structural applications, including building frames, equipment bases, and industrial supports. A36 steel offers excellent weldability and is a cost-effective choice for general fabrication. In stock for Los Angeles pickup. Learn More

A36 Hot Rolled Steel Angle measuring 6 inches by 4 inches with a 3/8 inch thickness. This structural angle conforms to ASTM A36 standards and offers a minimum yield strength of 36,000 PSI. Its large dimensions make it ideal for heavy structural framing, building supports, and industrial equipment manufacturing. Excellent weldability allows for easy fabrication. In stock and available for same-day pickup in Los Angeles. Learn More

3" x 5.7 lbs/ft A36 Hot Rolled Standard I-Beam, conforming to ASTM A36. Features a 36,000 PSI minimum yield strength and excellent weldability for reliable fabrication. This medium-sized beam is ideal for building frames, machinery bases, trailer chassis, and other structural applications where predictable performance is critical. In stock for immediate Los Angeles pickup. Learn More

1-5/8" OD x 0.065" wall Type 304 Stainless Steel Round Tube, 20-foot length, with a 180 grit polished finish. This versatile austenitic stainless steel meets ASTM A269 standards and offers 73,200 PSI tensile strength, excellent corrosion resistance, and superior weldability. Its medium diameter is ideal for architectural handrails, food processing equipment frames, and marine hardware. In stock for immediate Los Angeles pickup. Learn More

3/4" OD x 0.065" wall Hot Rolled Steel Round Tube, sold in 20 ft lengths. This structural tubing conforms to ASTM A500 Grade B, offering 58,000 PSI tensile strength and excellent weldability. Its small diameter is well-suited for light structural applications, equipment frames, furniture, and reinforcement where strength and economy are key. In stock and available for same-day pickup in Los Angeles. Learn More

2" x 1" Hot Rolled Steel Rectangular Tube with a 0.120" wall, supplied in 20-foot lengths. This structural tubing conforms to ASTM A500 Grade B, offering 58,000 PSI tensile strength and excellent weldability. Its combination of strength and formability makes it ideal for structural frames, trailer beds, support columns, and industrial fabrication projects. In stock for same-day pickup in Los Angeles. Learn More

A36 Hot Rolled Steel Round Bar with a 1/2" diameter and 240" length. This versatile, low-carbon steel conforms to ASTM A36 standards, offering a minimum yield strength of 36,000 PSI and excellent weldability for easy fabrication. Its medium diameter is ideal for shafts, axles, support bracing, and general repairs. Available for same-day pickup in Los Angeles. Learn More

3/4" diameter A36 Hot Rolled Steel Round Bar, 240" length. A general-purpose, low-carbon steel bar meeting ASTM A36 specifications. It offers excellent weldability and formability with a minimum yield strength of 36,000 PSI. Its medium diameter makes it ideal for axles, shafts, structural supports, and general fabrication projects. In stock for same-day Los Angeles pickup. Learn More

Hot Rolled Steel Square Tube measuring 1-1/4" x 1-1/4" with a 0.080" wall thickness, in 20-foot lengths. Manufactured to ASTM A500 Grade B standards, this tubing provides 46,000 PSI minimum yield strength and excellent weldability. Its strength-to-weight ratio makes it ideal for structural frames, equipment bases, and general fabrication projects requiring robust, cost-effective material. In stock for immediate Los Angeles pickup. Learn More

This 1-1/2" x 2-1/2" Large Welding Tab is precision-cut from 1/8" thick, high-quality weldable low-carbon steel. Designed with a 3/8" hole for versatile mounting, it meets AWS D1.1 structural welding standards for reliable fabrication. Learn More

A36 Hot Rolled Steel Flat Bar measuring 5 inches wide by 1/8 inch thick. Conforming to ASTM A36, this structural steel bar offers 36,000 PSI minimum yield strength and excellent weldability. Its large width makes it ideal for manufacturing base plates, heavy structural supports, trailer frames, and die components. This versatile, low-cost material is easily fabricated. In stock for same-day Los Angeles pickup. Learn More

A36 Hot Rolled Steel Angle measuring 4" x 3" legs with 1/4" thickness, in a 20-foot length. This structural angle conforms to ASTM A36 standards, offering a minimum yield strength of 36,000 PSI and excellent weldability. Its large size provides substantial rigidity, making it ideal for heavy structural frames, industrial equipment bases, and support bracing in construction projects. In stock for Los Angeles pickup. Learn More

3" x 1" Hot Rolled Steel Rectangular Tube with a 0.120" wall thickness (11 gauge), sold in 240" (20 ft) lengths. This structural tubing conforms to ASTM A500 Grade B, providing a minimum yield strength of 46,000 PSI. Its high strength-to-weight ratio and excellent weldability make it ideal for trailer frames, equipment bases, and general fabrication. In stock for same-day Los Angeles pickup. Learn More

Our industrial Fire Door Lock is engineered for critical safety applications in commercial and institutional buildings. This lock is certified to UL 10C standards for fire resistance and constructed from high-strength steel for maximum durability and security. It is designed for reliable performance on fire-rated door assemblies. Learn More

Hot rolled steel rectangular tube measuring 1-1/2" x 1" with a 0.083" wall thickness. Manufactured to ASTM A500 Grade B specifications, this structural tube provides 58,000 PSI tensile strength and excellent weldability. Its high strength-to-weight ratio makes it ideal for building frames, trailer beds, and industrial machinery supports. In stock and available for same-day pickup in Los Angeles. Learn More

1-1/2" x 1-1/2" Hot Rolled Steel Square Tube with a 0.18" wall thickness, supplied in 20-foot (240") lengths. This tubing conforms to ASTM A500 Grade B, offering a minimum yield strength of 46,000 PSI and excellent weldability. Its medium size is ideal for constructing durable structural frames, equipment bases, and support columns where strength and cost-effectiveness are key. In stock Los Angeles. Learn More

This 3-piece Aviation Snip Set includes essential tools for any metal fabricator's toolkit. The set contains a left-cut (red handle), right-cut (green handle), and straight-cut (yellow handle) snip. Featuring hardened steel blades and a compound leverage design, these snips provide maximum cutting power with minimal effort. Ideal for cutting sheet metal in fabrication, HVAC, and roofing projects. In stock Los Angeles. Learn More

Our 1-1/4 Double Lock Box is a durable gate hardware component crafted from high-strength Class 25-30 gray cast iron. Designed for 1-1/4" square tubing, it provides a secure housing for lock mechanisms in ornamental fences and security gates. Ideal for industrial fabrication and commercial applications. Learn More

Durable Galvanized Slotted Angle for versatile framing and support applications. Fabricated from commercial-grade steel with a corrosion-resistant galvanized finish meeting ASTM A653 coating standards. The 1-1/2" x 1-1/2" x 16GA profile provides reliable integrity for MRO and construction projects. Learn More

1" x 1" Hot Rolled Steel Square Bar in 240" lengths. Made from general-purpose A36 steel, it conforms to ASTM A36 specifications and provides a minimum yield strength of 36,000 PSI. Its excellent weldability and formability make it ideal for structural frames, brackets, trailer components, and general fabrication. This medium-sized bar is a versatile choice for construction and industrial maintenance. In stock for Los Angeles pickup. Learn More

1-1/4" NPS Schedule 40 pipe manufactured from 6063-T5 aluminum alloy. This architectural aluminum conforms to ASTM B241 and offers 27,000 PSI tensile strength. Known for its superior surface finish, excellent corrosion resistance, and good workability, it is ideal for handrails, frames, and furniture. This medium-sized pipe provides a balance of strength and weight. In stock for Los Angeles pickup. Learn More

5" x 2" Hot Rolled Steel Rectangular Tube with a 0.180" wall thickness, in 20-foot lengths. Manufactured to ASTM A500 Grade B specifications, this structural tubing provides a minimum yield strength of 46,000 PSI and excellent weldability. Its large profile offers superior strength and rigidity, making it ideal for trailer frames, heavy equipment bases, and structural supports. In stock for immediate Los Angeles pickup. Learn More

2" x 2" Hot Rolled Steel Square Tube with a 0.188" (3/16") wall thickness. Conforms to ASTM A500 Grade B with 46,000 PSI minimum yield strength. This structural tubing, also known as HSS, offers an excellent strength-to-weight ratio, superior weldability, and durability. Ideal for trailer frames, equipment bases, roll cages, and general fabrication projects. In stock for same-day pickup in Los Angeles. Learn More

2-1/2" x 2-1/2" x 3/16" 304 Stainless Steel Angle, available in 20-foot lengths. This versatile austenitic stainless angle conforms to ASTM A276, offering 73,200 PSI tensile strength, excellent corrosion resistance, and superior weldability. Its medium size is ideal for structural framing, equipment bases, shelving, and architectural trim where both strength and a clean finish are required. In stock for Los Angeles pickup. Learn More

1" OD x 0.120" wall Hot Rolled Steel Round Tube, available in 20 ft (240") lengths. Conforming to ASTM A500 Grade B, this structural tubing offers 58,000 PSI tensile strength and excellent weldability. Its medium size is ideal for equipment frames, handrails, roll cages, and general fabrication projects. In stock for same-day Los Angeles pickup. Learn More

3" x 3" A500 Grade B Hot Rolled Steel Square Tube with a 0.06" wall thickness, supplied in a 240" length. This structural tubing conforms to ASTM A500 and offers a minimum yield strength of 46,000 PSI. Its excellent weldability and high strength-to-weight ratio make it ideal for fabricating trailer frames, equipment supports, roll cages, and general structural applications. In stock for immediate pickup in Los Angeles. Learn More

A36 Hot Rolled Steel Angle measuring 1-1/4" x 1-1/4" legs with a 1/8" thickness. Conforming to ASTM A36, this versatile structural angle offers a minimum yield strength of 36,000 PSI and excellent weldability. Its small profile is perfect for light-duty framing, custom brackets, equipment guards, and general fabrication projects. In stock for immediate Los Angeles pickup. Learn More

The 1-1/4 Inch Square Plastic Cap provides a clean, finished look for square tubing applications. Made from durable, weather-resistant black plastic, it protects against sharp edges and internal debris. This cap offers a secure press-fit for reliability in fencing, furniture, and equipment fabrication. Learn More

Industrial Coating 218 is a high-performance alkyd and epoxy formulation designed for direct-to-metal (DTM) applications. This corrosion-resistant coating provides a durable finish for industrial MRO and fabrication projects, meeting key performance benchmarks. Learn More

This industrial-grade gray primer features a high-performance oil-based (alkyd) formulation for superior adhesion and corrosion resistance. It serves as an excellent foundation for topcoats on steel and other metal surfaces in demanding MRO and fabrication environments. Learn More

Industrial Coating 251V is a high-performance, direct-to-metal (DTM) alkyd enamel designed for superior corrosion protection. This industrial-grade coating provides a durable, weather-resistant finish for MRO and fabrication applications, formulated to meet MIL-SPEC performance criteria. Learn More

A36 Hot Rolled Steel Angle measuring 5" x 5" with a 5/16" thickness. This structural angle conforms to ASTM A36 specifications, providing a minimum yield strength of 36,000 PSI and excellent weldability. Its large size makes it ideal for heavy structural applications, including building frames, equipment bases, and industrial supports. In stock and available for same-day pickup in Los Angeles. Learn More

This industrial-grade 7” x ¼” x ⅞” grinding disc is engineered for high-performance metal grinding. Compliant with ANSI B7.1 safety standards, it features durable aluminum oxide abrasive material and fiberglass reinforcement for reliability. Rated for a maximum speed of 8,500 RPM. Learn More

A36 Hot Rolled Steel Flat Bar, 1-1/2" wide by 3/16" thick, in 240-inch lengths. Conforms to ASTM A36 with 36,000 PSI minimum yield strength. This low-carbon steel offers excellent weldability and good formability. As a medium-width bar, it is ideal for structural bracing, equipment frames, base plates, and general fabrication projects. In stock for immediate Los Angeles pickup. Learn More

Industrial Hardware Consumable 218 is a high-performance solution for MRO and fabrication. Formulated to meet key industrial performance standards like ASTM C557, this product ensures durability for demanding applications on metal surfaces. Ideal for corrosion protection and general maintenance tasks. Learn More

3" x 1" x 0.083" wall Hot Rolled Steel Rectangular Tube, 240" length. Conforms to ASTM A500 Grade B with a minimum yield strength of 46,000 PSI. This structural grade tubing offers an excellent strength-to-weight ratio and is easily welded and fabricated. Ideal for structural applications like building frames, trailer beds, support columns, and industrial machinery bases. In stock for Los Angeles pickup. Learn More

This 4-1/2" x .040" x 7/8" cut-off wheel is an industrial-grade abrasive engineered for high-speed cutting. It is ANSI B7.1 compliant and features fiberglass reinforcement for enhanced safety and durability during metal fabrication and MRO tasks. Learn More

Protect high-traffic areas with our Galvanized Corner Guard. Made from durable 16 gauge steel with a G90 galvanized coating for superior corrosion resistance, conforming to ASTM A653 standards. Ideal for industrial, commercial, and MRO applications requiring robust wall and corner protection. Learn More

Industrial Coating 227 is a professional-grade, direct-to-metal (DTM) alkyd paint designed for maximum adhesion and durability. This corrosion-resistant coating meets MIL-SPEC performance criteria and is ideal for protecting steel and iron surfaces in demanding industrial environments. Learn More

A 4" x 2" x 0.250" wall Hot Rolled Steel Rectangular Tube manufactured to ASTM A500 Grade B specifications. This structural grade tubing offers a minimum 58,000 PSI tensile strength and excellent weldability. The heavy wall provides superior load-bearing capacity for building frames, trailer construction, and industrial supports. In stock for same-day Los Angeles pickup. Learn More

This 10" x 1/8" x 1" abrasive cut-off wheel is engineered for high-speed metal cutting applications. Featuring fiberglass reinforcement for durability and safety, it is fully compliant with ANSI B7.1 standards. Designed for tools operating at or below a maximum speed of 6,100 RPM. Learn More

4" x 3" x 0.250" wall Hot Rolled Steel Rectangular Tube. This structural grade tubing conforms to ASTM A500 Grade B, providing 58,000 PSI tensile strength and excellent weldability. The robust dimensions and strength-to-weight ratio make it ideal for building frames, trailer beds, heavy equipment supports, and other load-bearing applications. In stock for Los Angeles pickup. Learn More

A36 Hot Rolled Steel Angle measuring 6" x 6" with a 3/8" thickness. This structural shape conforms to ASTM A36 standards, delivering a minimum yield strength of 36,000 PSI and excellent weldability for robust joints. Its large size is ideal for heavy-duty applications including building frames, industrial equipment bases, and trailer manufacturing. In stock for Los Angeles pickup. Learn More

This 6" x .040" x 7/8" Cut-Off Wheel is an industrial-grade abrasive cutting disc designed for high-speed cutting. Compliant with ANSI B7.1 safety standards, it features fiberglass reinforcement for enhanced durability and operator safety. Ideal for cutting steel, iron, and other metals. Learn More

1-1/2" nominal pipe size (NPS) 304 Stainless Steel Pipe, Schedule 40 x 20' length. Conforms to ASTM A312, offering excellent corrosion resistance and 73,200 PSI tensile strength. This medium-sized pipe is ideal for plumbing mains, process piping, and structural posts where durability and reliability are essential. In stock for same-day cutting and pickup in Los Angeles. Learn More

5" x 2" Hot Rolled Steel Rectangular Tube with a 0.120" wall, 240" length. This structural tube conforms to ASTM A500 Grade B, providing 58,000 PSI tensile strength and excellent weldability. The large rectangular profile offers superior resistance to bending and torsion, making it ideal for trailer frames, building supports, and heavy equipment bases. In stock for immediate Los Angeles pickup. Learn More

4" x 4" x 0.120" wall Hot Rolled Steel Square Tube, 240" length. This A500 Grade B structural tubing offers a minimum yield strength of 46,000 PSI and excellent weldability. The large profile is ideal for heavy-duty applications like building columns, equipment frames, trailer manufacturing, and industrial supports. In stock for Los Angeles pickup. Learn More

A36 Hot Rolled Steel Angle measuring 6" x 4" with a 5/16" thickness. This structural angle conforms to ASTM A36 standards and offers a minimum yield strength of 36,000 PSI with excellent weldability. The large profile is ideal for heavy structural applications, including building frames, industrial supports, and equipment manufacturing. Its strength and versatility make it a reliable choice for fabrication projects. In stock Los Angeles. Learn More

The 1/8" Cobalt Drill Bit is engineered from M35 steel with 5% cobalt for superior heat resistance when drilling hard metals. Featuring a 135° split-point geometry for precision, it is ideal for stainless steel and cast iron applications compliant with ANSI/ASME B94.11M standards. Learn More

A 4" x 4" x 1/4" structural angle in 304 Stainless Steel, supplied in 240" lengths. This product meets ASTM A276 specifications, offering 73,200 PSI tensile strength, excellent weldability, and superior corrosion resistance. Its large profile is ideal for heavy-duty structural applications, including building frames, equipment supports, and industrial bracing where strength and environmental durability are critical. In stock for Los Angeles pickup. Learn More

This 12" x 7/64" Cut-Off Wheel is an industrial-grade abrasive tool compliant with ANSI B7.1 safety standards. Engineered with fiberglass reinforcement for a maximum speed of 5,100 RPM, it is designed for fast, clean cuts on various metals. The 1" arbor hole fits standard stationary cut-off machines. Learn More

Hot Rolled Steel Rectangular Tube measuring 4" x 2" with a 0.188" wall thickness. Manufactured from A500 Grade B steel, this structural tubing meets ASTM A500 specifications and offers a minimum tensile strength of 58,000 PSI. Its high strength-to-weight ratio and excellent weldability make it ideal for building frames, trailer construction, and heavy-duty supports. In stock for immediate Los Angeles pickup. Learn More

3/4" x 1/4" A36 Hot Rolled Steel Flat Bar, sold in 240-inch (20-foot) lengths. Conforms to ASTM A36 with a minimum yield strength of 36,000 PSI. This versatile and economical steel bar offers excellent weldability and formability. Its small profile is ideal for manufacturing support brackets, straps, shims, and general fabrication projects. In stock for same-day Los Angeles pickup. Learn More

A36 Hot Rolled Steel Flat Bar measuring 10 inches wide by 3/8 inch thick, in 240-inch (20-foot) lengths. This structural bar conforms to ASTM A36 and provides a minimum yield strength of 36,000 PSI with excellent weldability. Its large width makes it ideal for heavy structural components, base plates for machinery, and die components. In stock for immediate cutting and pickup in Los Angeles. Learn More

High-performance 4-1/2” x 1/4” grinding disc designed for aggressive material removal. Compliant with ANSI B7.1 safety standards, this fiberglass-reinforced abrasive wheel operates at up to 13,300 RPM. Constructed from durable aluminum oxide for extended life in metal fabrication and MRO tasks. Learn More

A36 Hot Rolled Steel Channel, size C3 x 5.0 (3" Height, 5.0 lbs/ft), in 240" lengths. Conforming to ASTM A36, this structural channel offers a minimum yield strength of 36,000 PSI and excellent weldability. Its C-shaped profile provides good structural support for frames, braces, and trailer components. In stock for immediate Los Angeles pickup. Learn More

This 5” x .040” cut-off wheel is engineered for high-speed cutting of metal. It is an ANSI B7.1 compliant abrasive wheel featuring durable fiberglass reinforcement for safety and performance. Rated for a maximum of 12,200 RPM, it delivers precise, clean cuts in fabrication and MRO applications. Learn More

High-performance 40-grit zirconia flap disc for aggressive material removal and finishing. Compliant with ANSI B7.1 safety standards, this 4.5" x 7/8" disc is engineered for grinding steel and other ferrous metals. Its durable zirconia abrasive ensures a long service life in demanding MRO and fabrication applications. Learn More

1" x 1/4" Hot Rolled Steel Flat Bar, 240" length. Conforms to ASTM A36, a low-carbon structural steel with 58,000 PSI tensile strength and excellent weldability. This versatile bar is easy to form, drill, and machine. Its medium size is ideal for structural bracing, equipment frames, base plates, and general fabrication projects. In stock for immediate Los Angeles pickup. Learn More

This industrial-grade construction adhesive is engineered for high-strength bonding in demanding applications. Compliant with ASTM C557 standards, it provides a reliable bond for a wide range of materials used in MRO and fabrication projects. Ideal for securing metal, wood, and composite surfaces. Learn More

High-performance 80 grit zirconia flap disc for rapid stock removal and finishing. Compliant with ANSI B7.1 safety standards, this 4-½” x ⅞” disc is rated for 13,300 RPM. Ideal for grinding and blending on steel and other ferrous metals. Learn More

A36 Hot Rolled Steel Angle with 5" and 3" legs, a 3/8" thickness, and 240" length. This unequal leg angle conforms to ASTM A36, providing a minimum 36,000 PSI yield strength and excellent weldability. The large profile is ideal for heavy-duty structural applications, including building frames, equipment bases, and industrial supports. In stock and ready for same-day pickup in Los Angeles. Learn More

5" x 1/2" Hot Rolled A36 Steel Flat Bar, supplied in 240-inch (20-foot) lengths. This structural steel bar conforms to ASTM A36 and offers a minimum yield strength of 36,000 PSI with excellent weldability and formability. Its large cross-section is ideal for manufacturing heavy-duty base plates, structural supports, trailer frames, and other general fabrication projects requiring robust strength. In stock for immediate Los Angeles pickup. Learn More

5" x 1" A36 Hot Rolled Steel Flat Bar, sold in 240" (20-foot) lengths. This structural steel conforms to ASTM A36, offering a minimum yield strength of 36,000 PSI and excellent weldability. Its substantial cross-section makes it ideal for manufacturing heavy-duty base plates, structural supports, trailer frames, and die components where strength and rigidity are critical. In stock and available for same-day pickup in Los Angeles. Learn More

High-performance 120 Grit Zirconia Flap Disc designed for finishing and blending applications. Compliant with ANSI B7.1 safety standards, this 4-1/2" x 7/8" disc provides a long-lasting, consistent cut on steel and other ferrous metals. Rated for a maximum speed of 13,300 RPM. Learn More

A36 Hot Rolled Steel Flat Bar, 10 inches wide by 1/4 inch thick, in a 240-inch (20-foot) length. This structural steel conforms to ASTM A36 specifications and offers a minimum yield strength of 36,000 PSI with excellent weldability. Its substantial width makes it ideal for heavy-duty applications like base plates, structural supports, and heavy equipment fabrication. In stock for same-day Los Angeles pickup. Learn More

22 Gauge Galvanized Steel Sheet, measuring 48" x 120". This product conforms to ASTM A653 and features a protective hot-dip zinc coating for excellent corrosion resistance. Its thin gauge offers great formability, making it ideal for HVAC ductwork, flashing, automotive panels, and protective enclosures. Combines steel strength with long-term durability in outdoor or high-moisture environments. In stock for Los Angeles pickup. Learn More

1" NPS Schedule 40 pipe manufactured from 304 stainless steel, supplied in a 240" (20 ft) length. Conforming to ASTM A312, it provides excellent weldability and corrosion resistance with a tensile strength of 73,200 PSI. This versatile size is ideal for fluid transport, industrial plumbing, and structural applications like handrails and support posts. In stock for Los Angeles pickup. Learn More

A durable 3 lb rubber mallet featuring a 3-inch non-marring face and a 14-inch overall length. The solid rubber head delivers firm, controlled blows without damaging metal surfaces, wood, or delicate components. Its balanced hardwood handle provides a comfortable grip for precise work in fabrication, woodworking, and general assembly. In stock Los Angeles. Learn More

The 3 Inch Post Ball Cap is a durable, decorative finial for fence posts and railings. Manufactured from high-strength Class 25-30 gray iron, it provides a classic architectural finish and protects the post top from weather. Ideal for both new fabrication and MRO projects. Learn More

4" x 2" x 0.120" Hot Rolled Steel Rectangular Tube, conforming to ASTM A500 Grade B. This structural tubing offers a high strength-to-weight ratio with 58,000 PSI tensile strength and excellent weldability. The large profile is ideal for heavy-duty applications like building frames, trailer beds, support columns, and industrial machinery bases. In stock for same-day pickup in Los Angeles. Learn More

3" x 1-1/2" Hot Rolled Steel Rectangular Tube with a 0.188" wall thickness. Conforms to ASTM A500 Grade B, offering 58,000 PSI tensile strength and excellent weldability. This hollow structural section (HSS) is ideal for trailer frames, building supports, and industrial machine bases where strength against bending and torsion is required. In stock for immediate Los Angeles pickup. Learn More

6" x 2" Hot Rolled Steel Rectangular Tube with a 0.188" (3/16") wall thickness. This A500 Grade B structural tubing meets ASTM A500 specifications and provides a minimum yield strength of 46,000 PSI. Its high strength-to-weight ratio makes it ideal for building frames, trailer manufacturing, and heavy equipment supports. In stock for same-day Los Angeles pickup. Learn More

3" x 3" Hot Rolled Steel Square Tube with a 0.188" wall, 240" length. Conforms to ASTM A500 Grade B with 58,000 PSI tensile strength and excellent weldability. This structural tubing, also known as HSS, provides a high strength-to-weight ratio. Ideal for building frames, equipment bases, trailer components, and general fabrication projects. In stock for Los Angeles pickup. Learn More

1-1/4" x 1/2" x 1/8" A36 Hot Rolled Steel Channel, sold in 20 ft lengths. This bar-size channel conforms to ASTM A36 specifications and offers a minimum yield strength of 36,000 PSI. Its excellent weldability and good machinability make it a versatile choice for general fabrication. Ideal for small equipment frames, structural brackets, and support braces. In stock for Los Angeles pickup. Learn More

This 1/8" 6013 All-Purpose Welding Rod is an AWS/ASME certified electrode designed for versatile performance. Ideal for general fabrication and repair on mild steel, it offers a stable arc and easy slag removal. Packaged in a convenient 10 LB container for MRO and project use. Learn More

1" x 1/2" Hot Rolled Rectangular Steel Tube with a 0.065" wall thickness. Manufactured to ASTM A500 Grade B specifications, this structural tubing provides a 58,000 PSI tensile strength and excellent weldability. Its combination of strength and formability makes it ideal for building frames, trailer cross-members, and machinery bases. The hot rolled finish has a dark mill scale. In stock for immediate Los Angeles pickup. Learn More

The L-Clip Welding Tab is a critical fabrication component made from high-quality, weldable mild steel. Measuring 1-1/2" x 3-1/2", this tab is engineered for creating strong, precise fixturing points and conforms to general industry standards for material quality and weldability. Learn More

Hot Rolled Steel Rectangular Tube, 1-1/2" x 1/2" with a 0.065" wall thickness. This structural tubing conforms to ASTM A500 Grade B, offering a tensile strength of 58,000 PSI and excellent weldability. Its high strength-to-weight ratio makes it ideal for constructing trailer frames, building supports, and industrial machine bases. Medium-sized profile suitable for general fabrication. In stock for Los Angeles pickup. Learn More

Secure equipment and materials with the Regal 2” x 20ft Ratchet Cargo Lash. This industrial tie-down is made from durable polyester webbing, meets WSTDA-T-1 standards, and features a 3,335 lbs Working Load Limit (WLL) for reliable performance. Learn More

This 7" x 1.6mm cut-off wheel features a 7/8" arbor hole, making it compatible with most standard angle grinders. Rated for a maximum speed of 8,500 RPM, this abrasive disc is engineered for fast, burr-free cutting of steel, stainless steel, and other ferrous metals. Its thin kerf design minimizes material waste and provides a clean finish. Ideal for fabrication and metalworking shops. In stock Los Angeles. Learn More

3/16" thick Hot Rolled Diamond Plate, available in 4' x 10' sheets. Produced from A36 structural steel and conforming to ASTM A786 standards for pattern, this plate provides maximum skid resistance. With a tensile strength of 58,000 PSI and excellent weldability, it is ideal for industrial flooring, ramps, truck beds, and stair treads. In stock for Los Angeles pickup. Learn More

This 2" Square Pressed Steel Cap provides a clean, protective finish for square tubing and fence posts. Fabricated from durable, weldable mild steel, it prevents water ingress and adds a professional aesthetic to any ornamental ironwork project. Learn More

This 1-¼" x 3-¼" L-Clip Welding Tab is a high-quality fabrication component made from durable, weldable mild steel. Designed for structural connections and reinforcement, it conforms to AWS welding practices for strength and reliability. Ideal for creating strong, permanent weld points in MRO and new construction projects. Learn More

1" x 1" x 1/8" Hot Rolled A36 Steel Angle available in 240" (20 ft) lengths. Conforming to ASTM A36, this angle offers a minimum yield strength of 36,000 PSI and excellent weldability. The hot-rolled process results in a durable, scaled finish. Its small profile is ideal for light structural framing, equipment guards, brackets, and general fabrication projects. In stock for same-day Los Angeles pickup. Learn More

Our 5-inch barrel hinges are constructed from high-strength, weldable steel for maximum durability. Engineered for heavy-duty gates and doors, these hinges provide a smooth, reliable pivot point for industrial fabrication and MRO projects. The plateless design allows for direct welding to steel surfaces. Learn More

1" Outer Diameter x 0.083" Wall Hot Rolled Steel Round Tube in 240" lengths. Conforming to ASTM A500 Grade B, this structural tubing provides a minimum yield strength of 46,000 PSI and excellent weldability for fabrication. Its medium size is well-suited for equipment frames, handrails, roll cages, and general structural supports. In stock for immediate Los Angeles pickup. Learn More

14 Gauge (48" x 120") 1018 Cold Rolled Steel Sheet, conforming to ASTM A1008. Features 63,800 PSI tensile strength, superior dimensional tolerance, and an exceptionally smooth surface finish ideal for painting or powder coating. Excellent formability makes it a top choice for automotive panels, appliance casings, metal enclosures, and precision stamped parts. In stock for same-day pickup in Los Angeles. Learn More