Search results for: 'thick good coatings'

7/8 inch diameter Cold Rolled All Thread Rod in 10-foot lengths. This zinc-plated, low-carbon steel rod meets the strength requirements of ASTM A307 Grade A, with a typical tensile strength of 63,800 PSI. The zinc plating provides moderate corrosion resistance for versatile use. It is ideal for general-purpose fastening, anchoring, and support systems in construction and manufacturing. In stock for immediate Los Angeles pickup. Learn More

1" diameter Cold Rolled All Thread Rod in 120" (10 ft) lengths. Made from 1018 steel with an oil finish for rust prevention, this rod meets ASTM A307 Grade A strength requirements with a 60,000 PSI tensile strength. The continuous threading provides versatile fastening for construction, manufacturing, and general repair. Easily cut to custom lengths. In stock for Los Angeles pickup. Learn More

1-inch diameter Cold Rolled All Thread Rod in a 120-inch length with a zinc plated finish. This rod meets ASTM A307 Grade A strength requirements, with a base material tensile strength of 63,800 PSI. The zinc plating provides good corrosion resistance for general-purpose fastening, anchoring systems, and suspending HVAC fixtures. In stock for immediate Los Angeles pickup. Learn More

3/16" 1018 Cold Rolled Steel Hex Bar in 144" lengths. Produced to ASTM A108 specifications, this bar offers a 63,800 PSI tensile strength, tight dimensional tolerances, and a clean, smooth surface finish. Its good machinability makes it ideal for producing small fasteners, fittings, and precision hardware. In stock for Los Angeles pickup. Learn More

5/16" Cold Rolled 1018 Hexagon Bar, 144" length. Meets ASTM A108 specifications. This low-carbon steel bar offers 63,800 PSI tensile strength, a smooth surface finish, and tight dimensional tolerances from the cold drawing process. Its excellent machinability and good weldability make it suitable for producing fasteners, shafts, hydraulic fittings, and other precision machined components. In stock for same-day Los Angeles pickup. Learn More

9/16" 1018 Cold Rolled Hexagon Bar, 144" length. Conforms to ASTM A108 specifications with 63,800 PSI tensile strength and excellent machinability. The cold drawn process provides a smooth finish and tight dimensional tolerances. This medium-sized hex bar is ideal for manufacturing fasteners, shafts, hydraulic fittings, and other machined components. In stock for immediate Los Angeles pickup. Learn More

5/8 inch 1018 Cold Rolled Hexagon Bar, 144" length. Conforms to ASTM A108 with 63,800 PSI tensile strength. The cold drawing process provides a smooth surface, tight dimensional accuracy, and excellent machinability. This medium-sized bar is ideal for manufacturing nuts, standoffs, hydraulic fittings, and machinery shafts. In stock for Los Angeles pickup. Learn More

1 inch 1018 Cold Rolled Steel Hexagon Bar, 144-inch length. Conforms to ASTM A108 standards, delivering 63,800 PSI tensile strength and excellent machinability. Its smooth finish and tight tolerances make it ideal for fasteners, nuts, hydraulic fittings, and machined components requiring a hex shape for gripping. In stock for same-day Los Angeles pickup. Learn More

1/8" diameter 1018 Cold Rolled Steel Round Bar, 144" length. Conforms to ASTM A108 with a tensile strength of 63,800 PSI. The cold drawn process provides a smooth, scale-free finish and tight dimensional tolerances. This small diameter is ideal for manufacturing precision pins, dowels, fastener blanks, and small shafts. In stock for Los Angeles pickup. Learn More

3/16" diameter 1018 Cold Rolled Round Bar, sold in 144" lengths. Conforms to ASTM A108 with 63,800 PSI tensile strength and excellent machinability. The cold drawing process provides tight dimensional tolerances and a smooth, clean finish. This small-diameter rod is ideal for manufacturing pins, dowels, small shafts, and fastener blanks. In stock for Los Angeles pickup. Learn More

1/4" diameter 1018 Cold Rolled Round Bar, 144" length. Conforms to ASTM A108 with 63,800 PSI tensile strength and excellent machinability. This cold drawn bar has tight tolerances and a smooth finish, ideal for small shafts, pins, dowels, and fastener blanks. In stock for Los Angeles pickup. Learn More

5/16 inch diameter 1018 Cold Rolled Round Bar, sold in 144-inch lengths. Conforms to ASTM A108 specifications, offering 63,800 PSI tensile strength, tight dimensional tolerances, and excellent machinability. Its smooth, scale-free surface is ideal for precision parts like pins, dowels, small shafts, and fastener blanks. In stock for same-day Los Angeles pickup. Learn More

3/8" diameter 1018 Cold Rolled Round Bar in 144" lengths. This general-purpose steel conforms to ASTM A108, offering 63,800 PSI tensile strength, superior dimensional tolerances, and a smooth finish. Its excellent machinability makes it ideal for producing pins, dowels, fastener blanks, and small shafts requiring precision and good weldability. In stock for Los Angeles pickup. Learn More

7/16 inch diameter 1018 Cold Rolled Round Bar in 144-inch lengths. Produced to ASTM A108 standards, this bar offers 53,700 PSI yield strength, excellent machinability, and a smooth, scale-free surface. Its tight dimensional tolerances make it ideal for high-precision applications. This small diameter is perfect for manufacturing dowel pins, small shafts, and fastener blanks. In stock for immediate Los Angeles pickup. Learn More

1/2" diameter 1018 Cold Rolled Steel Round Bar, 144" length. Conforms to ASTM A108 with 63,800 PSI tensile strength and a smooth, scale-free finish. Known for its excellent machinability and tight dimensional tolerances, this medium-diameter bar is ideal for manufacturing shafts, axles, bushings, and other precision machined components. In stock for Los Angeles pickup. Learn More

5/8" diameter 1018 Cold Rolled Steel Round Bar, 144" length. This bar conforms to ASTM A108 and offers 63,800 PSI tensile strength, superior dimensional tolerance, and a smooth, scale-free surface. Its excellent machinability and good weldability make it a versatile choice for shafts, axles, pins, and custom machined components. In stock for same-day Los Angeles pickup. Learn More

This 3/4" diameter 1018 Cold Rolled Round Bar is a 144-inch low-carbon steel product conforming to ASTM A108. It offers a tensile strength of 63,800 PSI, superior dimensional accuracy, and a smooth, scale-free surface. Known for its excellent machinability and good weldability, it is ideal for producing shafts, axles, and precision machined components. In stock for immediate pickup in Los Angeles. Learn More

7/8 inch diameter 1018 Cold Rolled Round Bar, sold in 144-inch lengths. Conforms to ASTM A108 with 63,800 PSI tensile strength and excellent machinability. The cold drawn process provides a smooth finish and tight dimensional tolerances. This medium-diameter bar is ideal for shafts, axles, pins, and general-purpose machined components. In stock for Los Angeles pickup. Learn More

1" diameter 1018 Cold Rolled Steel Round Bar, 144" length. Conforming to ASTM A108, this bar has a tensile strength of 63,800 PSI and excellent machinability. Its smooth, scale-free surface and tight dimensional tolerances make it ideal for shafts, axles, pins, and custom machined parts requiring precision. In stock Los Angeles. Learn More

1-1/4" diameter 1018 Cold Rolled Round Bar, 144" length. Conforming to ASTM A108, this general-purpose steel has 63,800 PSI tensile strength and excellent machinability. The cold drawn process provides a smooth, scale-free finish and tight dimensional tolerances, making it ideal for shafts, axles, and precision machined components. In stock for Los Angeles pickup. Learn More

1-7/8" diameter 1018 Cold Rolled Round Bar, 144" length. Conforms to ASTM A108 with 53,700 PSI yield strength and excellent machinability. The cold drawn process provides a smooth finish and tight dimensional tolerances. This medium-diameter bar is ideal for manufacturing shafts, axles, pins, and various machined components requiring strength and precision. In stock for Los Angeles pickup. Learn More

1/4" x 1/4" 1018 Cold Rolled Steel Square Bar, 144" length. Conforms to ASTM A108 with 63,800 PSI tensile strength, excellent machinability, and tight dimensional tolerances. The cold drawn finish provides a clean, smooth surface ideal for precision parts. This small square bar is perfect for shafts, dowels, pins, and fixtures. In stock for Los Angeles pickup. Learn More

3/8" x 3/8" 1018 Cold Rolled Steel Square Bar, 144" length. Conforms to ASTM A108 with a tensile strength of 63,800 PSI. The cold drawing process provides tight dimensional tolerances and a clean, smooth surface finish, ideal for machining. This small size is excellent for shafts, dowels, pins, and fixtures. In stock for Los Angeles pickup. Learn More

1/2" x 1/2" 1018 Cold Rolled Square Bar in 144" lengths. Produced to ASTM A108 standards, this low-carbon steel offers a clean surface, tight dimensional tolerances, and excellent machinability. With a tensile strength of 63,800 PSI, it is ideal for medium-duty applications like shafts, fixtures, and precision machined components where a superior finish is required. In stock for Los Angeles pickup. Learn More

5/8" x 5/8" 1018 Cold Rolled Square Bar in 144" lengths. Produced to ASTM A108 standards, this bar offers a tensile strength of 63,800 PSI, excellent machinability, and a superior surface finish. Its tight dimensional tolerances make it ideal for shafts, fixtures, and precision machined components requiring minimal prep work. In stock for same-day Los Angeles pickup. Learn More

3/4 inch 1018 Cold Rolled Steel Square Bar, sold in 144" lengths. This general-purpose low-carbon steel conforms to ASTM A108, offering excellent machinability and a clean, smooth surface finish. The cold drawing process increases strength to 63,800 PSI and provides tight dimensional tolerances, making it ideal for shafts, fixtures, and precision machined parts. In stock Los Angeles. Learn More

1" x 1" 1018 Cold Rolled Steel Square Bar, 144" length. Conforms to ASTM A108 and offers 63,800 PSI tensile strength, a clean surface finish, and tight dimensional tolerances. Its excellent machinability (70% vs 1212) makes it ideal for shafts, dowels, fixtures, and precision machined components. In stock for same-day cutting and Los Angeles pickup. Learn More

The 1/4" Cobalt Drill Bit is engineered from M35 steel with 5% cobalt for exceptional heat resistance up to 1100°F. Its 135° split-point geometry ensures precise, walk-free starts and efficient drilling in hard materials like stainless steel and cast iron. Learn More

Industrial Caster 251 is a heavy-duty mobility solution designed for demanding environments. Featuring an industrial-grade build with certified load ratings from 200-2000 lbs, it provides reliable movement for equipment, carts, and workbenches. Learn More

Our Spring Loaded Wheel with 3 Casters is an industrial-grade solution for material handling equipment. Engineered to support dynamic load ratings from 200 to 2000 lbs, it provides superior shock absorption and smooth mobility for carts, racks, and dollies. The durable steel construction ensures reliability in demanding warehouse and fabrication environments. Learn More

4-1/2 Tube Ring Learn More

Our 5-inch barrel hinges are engineered from high-strength carbon steel for maximum durability and load capacity. Designed for weld-on applications, these hinges provide a robust pivot point for heavy gates, doors, and industrial equipment. They feature a grease zerk fitting for easy maintenance and extended service life. Learn More

1-1/2 Single Lock Box Learn More

Learn More

1-1/4 Single Lock Box Learn More

This 4-inch V-Groove Wheel Box is an industrial-grade component designed for high-load capacity on sliding gates and doors. Constructed from heavy-duty steel, it ensures smooth, reliable operation on angle iron tracks. Ideal for fabrication and MRO applications. Learn More

Learn More

Learn More

Our 5" (5/8) J-Bolt Adjustable Barrel Hinges are engineered from heavy-duty, weldable low carbon steel for superior strength and durability. Designed for high-load applications, these hinges provide smooth, reliable operation for heavy gates and doors. The adjustable J-bolt allows for precise alignment during installation. Learn More

Learn More

Learn More

Learn More

Learn More

Learn More

Learn More

Learn More

This 6 Inch Solid V-Groove Wheel is engineered for high-capacity applications, supporting loads up to 2000 lbs. Manufactured from solid steel to industrial standards, it provides durable and reliable performance on angle iron tracks for gates and carts. Learn More

Learn More

A compact and secure 10-digit mini garage door and gate opener with keychain. Built with industrial-grade components for reliable access control in commercial and MRO applications. Features a durable, weather-resistant casing for long-lasting performance. Learn More

The L-Clip Welding Tab is a critical fabrication component made from high-quality, weldable mild steel. Measuring 1-1/2" x 3-1/2", this tab is engineered for creating strong, precise fixturing points and conforms to general industry standards for material quality and weldability. Learn More

The Bobco Auto-Darkening Welding Helmet offers superior protection, meeting ANSI/ISEA Z87.1+ safety standards. Featuring a 3.67” x 1.70” viewing area and a lightweight 1.07lb polycarbonate body, it ensures comfort and clarity for professional fabrication and MRO tasks. Learn More

The Bobco Auto Darkening Weld Helmet provides superior protection, meeting ANSI/ISEA Z87.1+ standards for impact resistance. It features a large 3.94” x 3.15” viewing area for maximum visibility and is constructed from a lightweight, durable high-impact resistant material. Learn More

Chain #41 for Eagle-1000 series. Part# XM200

10' Length

Learn More

Chain #40 for Eagle-2000 series. Part# XM208

10' Length

Learn More

Our 3-Inch Rubber Roller is an industrial-grade component designed for material handling and fabrication. Features a durable, high-traction rubber surface on a steel core, engineered for consistent performance in MRO and production environments. Learn More

Our 12-inch rubber roller is an industrial-grade component designed for high-load capacity material handling. Featuring a durable, non-marring rubber surface bonded to a steel core, it provides smooth movement for conveyor systems and industrial carts. Engineered to meet demanding MRO and fabrication requirements. Learn More

Protect your hands with our industrial-grade Goat Leather Driving Gloves. These gloves are rated to ANSI/ISEA 105 standards, providing excellent dexterity and durability for material handling. The premium goat leather construction ensures a comfortable fit and reliable protection for MRO and fabrication tasks. Learn More

Durable split leather work gloves designed for industrial use. These gloves are ANSI/ISEA 105 rated and feature a reinforced palm for enhanced grip and abrasion resistance, ideal for material handling and fabrication. Learn More

Aviation Snip Set 3 pcs Green, Yellow and Red Handles. Learn More

Rubber Mallet

• Head L: 4-1/2"
• Face DIA: 3"
• Overall H: 14"

Learn More

Hitch Ball 6" Learn More

Morse Metal Devil NXT

• 7-1/4" x 5/8"
• 5800 RPM
• 48 Teeth Metal
• Carbide Tipped Circular Saw Blade

Learn More

11" Face Clamp Learn More

Regal Cuter Set 2 Pcs (2-1/2" and 3-7/8") Heavy Duty Utility Cutter Set Learn More

This 4” x 1-¾” V-Groove Wheel is an industrial-grade component designed for high-capacity material handling. Manufactured from high-strength steel for durability, it supports heavy loads on inverted angle iron tracks. Ideal for sliding gates, assembly lines, and industrial carts. Learn More

This 4" Heavy Duty Solid V-Groove Wheel is engineered for high-load applications on inverted angle iron track. Constructed from solid steel for maximum durability and smooth operation, it's ideal for industrial sliding gates, material handling carts, and production line systems. Supports significant weight with reliable guidance. Learn More

This 6” heavy-duty solid V-groove wheel is engineered for high-capacity industrial applications. Constructed from solid steel for maximum durability, it supports significant load ratings and is designed for reliable operation on angle iron tracks. Ideal for industrial gates, heavy carts, and material handling systems. Learn More

This Small Slide Bolt features a durable 1/2" diameter steel shaft for reliable latching. Manufactured from industrial-grade low-carbon steel similar to ASTM A307 material, it provides a simple and effective security solution for light-duty doors and gates. Its robust construction ensures long-lasting performance in MRO and fabrication applications. Learn More

EAGLE CHROME SERIES 1 BUTTON VISOR REMOTE/TRANSMITTER EG642 COMPATIBLE WITH NEW EAGLE CHROME RECEIVER ONLY EG650/EG652 Learn More

EAGLE 2000 FR (1HP) (FOOT RELEASE) SLIDE GATE OPERATOR Learn More

The ACCESS 10 Transmitter is a durable, 10-digit remote for commercial garage doors and gates. Engineered for reliability and UL/CSA certified, it ensures secure access for MRO and facility management applications. Features a robust industrial polymer casing for long-term use. Learn More

This 5/16” x 2” Hex Lag Screw is a heavy-duty fastener for wood applications. Made from low carbon steel and zinc-plated for corrosion resistance, it meets ASTM A307 specifications for strength and reliability. The hex head allows for high-torque installation. Learn More

7” X 1.6MM X ⅞” CUT-OFF WHEEL, RPM:8,500 Learn More

This 1/2" x 4-1/2" industrial masonry drill bit is engineered for high-performance drilling in concrete, brick, and block. It features a durable tungsten carbide tip and complies with ANSI B212.15 standards, ensuring precision and long service life for demanding applications. Learn More

Engineered for durability, this 1/2" x 4-1/2" masonry drill bit features a robust tungsten carbide tip for efficient drilling in concrete, brick, and block. It is manufactured to meet ANSI B212.15 standards, ensuring reliable performance in demanding construction and MRO applications. Learn More

Our industrial-grade Black Nitrile Disposable Gloves offer superior puncture and chemical resistance. These powder-free gloves are ANSI/ISEA 105 rated for reliable hand protection in demanding MRO, fabrication, and general-purpose applications. Packaged in a convenient 100-piece box. Learn More

Durable 14" brown leather welding gloves engineered for high-heat protection. These industrial-grade gloves meet ANSI/ISEA 105 standards for cut and abrasion resistance, making them ideal for professional welding and fabrication. Learn More

9" RUBBER BOOTS, H: 16" Learn More

9-1/2" RUBBER BOOTS, H: 16" Learn More

10" RUBBER BOOTS, H: 16" Learn More

11" RUBBER BOOTS, H: 16"Learn More

12" RUBBER BOOTS, H: 16"Learn More

Enhance worksite safety with high-visibility orange reflectorized vests. Constructed from durable, lightweight polyester mesh with reflective strips for maximum visibility, this free-size vest is essential PPE for construction and industrial environments. Learn More

ZINC RICH COLD GALVANIZED PRIMER, HIGH PURITY ZINC DUST Learn More

SKU 215 is an industrial-grade construction adhesive engineered for high-strength bonding. Compliant with ASTM C557, this adhesive provides a durable, reliable bond for a wide range of materials in fabrication and MRO projects. Learn More

This industrial-grade construction adhesive provides a high-strength bond for a wide range of materials. Compliant with ASTM C557 standards, it is engineered for reliability in demanding construction, fabrication, and MRO applications. Learn More

This industrial-grade construction adhesive meets ASTM C557 standards, ensuring a high-strength, reliable bond for professional use. Its versatile formulation is engineered for demanding fabrication, construction, and MRO applications on various substrates. Learn More

This industrial-grade construction adhesive is engineered for high-strength bonding in demanding applications. Compliant with ASTM C557 standards, it provides a reliable bond for a wide range of materials used in MRO and fabrication projects. Ideal for securing metal, wood, and composite surfaces. Learn More

Product 217 is an industrial-grade construction adhesive engineered to meet ASTM C557 standards. This high-strength adhesive provides a durable, permanent bond for a wide range of fabrication, MRO, and construction applications on various materials. Learn More

Model 217B is an industrial-grade caster designed for heavy-duty material handling applications. Featuring a robust steel frame and a high load rating of up to 2000 lbs, it provides durable and reliable mobility for carts, racks, and equipment in MRO and fabrication settings. Learn More

This industrial-grade construction adhesive is engineered for high-strength bonding on a variety of substrates. Compliant with ASTM C557 standards, it provides a durable, reliable bond for MRO, fabrication, and construction projects. Ideal for securing panels, framing, and other materials where a permanent hold is critical. Learn More

This industrial-grade construction adhesive provides a high-strength bond for a wide range of materials. Formulated to meet ASTM C557 standards, it ensures reliable performance for demanding fabrication, construction, and MRO applications. Ideal for bonding wood, metal, concrete, and masonry. Learn More

High-strength construction adhesive compliant with ASTM C557 standards. This industrial-grade formula provides a durable, reliable bond for a wide range of materials in fabrication and MRO projects. Learn More

Our industrial-grade construction adhesive offers superior bonding strength for a wide range of materials. This high-performance adhesive is formulated to meet ASTM C557 standards, ensuring reliable performance for demanding fabrication and MRO applications. Learn More

Our 260 Construction Adhesive is a high-strength formulation engineered for demanding industrial applications. Compliant with ASTM C557, this adhesive provides a durable, reliable bond for a wide range of construction and fabrication materials. Learn More

The C46 is an industrial-grade caster engineered for demanding material handling and fabrication applications. It features a robust steel frame and is available with certified load ratings from 200 to 2000 lbs, providing a durable mobility solution for heavy equipment. Learn More