Search results for: 'steel+weld+goods'

26 Gauge Galvanized Steel PBR Panel, measuring 36 inches wide by 288 inches (24 feet) long. Produced to ASTM A653 standards, this panel offers excellent corrosion resistance from its protective zinc coating. The PBR (Purlin Bearing Rib) profile provides structural strength, making it ideal for roofing, siding, and agricultural building applications where durability and weather resistance are required. In stock for Los Angeles pickup. Learn More

3/8" x 48" x 120" Hot Rolled Diamond Plate, made from A36 structural steel and conforming to ASTM A786 standards. This heavy-duty plate offers 58,000-80,000 PSI tensile strength and a raised pattern for maximum skid resistance. Its substantial thickness makes it ideal for industrial flooring, heavy equipment ramps, trench covers, and structural walkways. In stock for same-day Los Angeles pickup. Learn More

26 Gauge Galvanized Corrugated Steel Sheet, measuring 36 inches in width by 144 inches in length. Produced via a continuous hot-dip process to ASTM A653 specifications with a G90 zinc coating for excellent rust prevention. This lightweight and formable sheet is ideal for roofing, siding, and agricultural buildings. In stock and available for same-day pickup in Los Angeles. Learn More

5 inch Nominal Pipe Size (NPS) Galvanized Steel Pipe with a Schedule 40 wall thickness (0.258"), available in 21 ft lengths. Conforms to ASTM A53 Grade B with 60,000 PSI tensile strength. The hot-dip zinc coating provides superior corrosion resistance for outdoor and high-moisture use. This large diameter pipe is ideal for structural columns, main water lines, and industrial process piping. In stock for Los Angeles pickup. Learn More

3/8" x 3/8" 1018 Cold Rolled Steel Square Bar, 144" length. Conforms to ASTM A108 with a tensile strength of 63,800 PSI. The cold drawing process provides tight dimensional tolerances and a clean, smooth surface finish, ideal for machining. This small size is excellent for shafts, dowels, pins, and fixtures. In stock for Los Angeles pickup. Learn More

14 Gauge Hot Rolled Diamond Plate, 48" x 120". Conforms to ASTM A786 (pattern) on an A36 steel base. This plate offers 58,000 PSI tensile strength, excellent weldability, and a durable, slip-resistant surface. Ideal for industrial flooring, ramps, truck beds, and stair treads where safety and durability are critical. In stock for same-day Los Angeles pickup. Learn More

26 Gauge Galvanized Corrugated Steel Sheet, 36" wide by 96" long. The G90 zinc coating, applied per ASTM A653, delivers excellent corrosion resistance for outdoor use. Its corrugated profile adds rigidity to the lightweight panel, making it ideal for roofing, siding, fencing, and agricultural barriers where durable weather protection is required. In stock for immediate pickup in Los Angeles. Learn More

1/4" Hot Rolled Diamond Plate (Tread Plate) made from A36 structural steel. This sheet measures 48" x 120" and conforms to ASTM A786 and A36 standards. It features a raised pattern for maximum skid resistance, excellent weldability, and a minimum tensile strength of 58,000 PSI. Ideal for industrial flooring, ramps, and truck beds. In stock Los Angeles. Learn More

3/16" x 1/2" 1018 Cold Rolled Steel Flat Bar, 144" length. Conforms to ASTM A108 with 63,800 PSI tensile strength and excellent machinability. The smooth, scale-free surface and tight dimensional tolerances make it ideal for fabrication of small parts like brackets, straps, and shims that require a clean finish and precision. In stock for Los Angeles pickup. Learn More

12 Gauge Hot Rolled Diamond Plate, 48" x 120" sheet. Made from A36 structural steel conforming to ASTM A786 pattern standards. Features 58,000-80,000 PSI tensile strength, excellent weldability, and a raised pattern for maximum slip resistance. This medium-thickness plate is ideal for industrial flooring, ramps, truck beds, and stair treads. In stock for same-day Los Angeles pickup. Learn More

5" x 10 lbs/ft Hot Rolled Steel Standard I-Beam, 20 ft length. Conforms to ASTM A36, providing a minimum yield strength of 36,000 PSI and excellent weldability for easy fabrication. Its dimensions (5" Height x 3" Flange) make it a robust choice for structural framing, machinery bases, and support girders. In stock for same-day Los Angeles pickup. Learn More

3/4 inch diameter Cold Rolled All Thread Rod in a 120-inch length with a zinc-plated finish for corrosion resistance. Manufactured from low-carbon steel, its strength conforms to ASTM A307 Grade A with a typical tensile strength of 63,800 PSI. This versatile, continuously threaded rod is ideal for general-purpose fastening, bracing, and anchoring applications in construction and industrial settings. In stock Los Angeles. Learn More

3" NPS Schedule 40 Galvanized Steel Pipe, sold in 21 ft lengths. Conforms to ASTM A53 Grade B with a 60,000 PSI tensile strength. The hot-dip zinc coating provides excellent corrosion resistance for outdoor and high-moisture environments. This large diameter pipe is ideal for main water lines, industrial process piping, structural columns, and protective barriers. In stock for same-day Los Angeles pickup. Learn More

1 Inch Schedule 40 Galvanized Steel Pipe, sold in 21-foot lengths. Conforms to ASTM A53 Grade B, providing 60,000 PSI tensile strength and superior corrosion resistance from its hot-dip zinc coating. This medium-diameter pipe is ideal for plumbing mains, structural posts, outdoor handrails, and fence framework. A reliable choice for applications requiring strength and weather protection. In stock for same-day Los Angeles pickup. Learn More

2" Nominal Pipe Size (NPS) Galvanized Steel Pipe, Schedule 40 wall, 21-foot length. Conforms to ASTM A53 Grade B with 60,000 PSI tensile strength. The hot-dip zinc coating provides excellent corrosion resistance for outdoor and high-moisture use. Ideal for plumbing mains, HVAC piping, handrails, and structural posts. In stock for same-day Los Angeles pickup. Learn More

1/2" NPS Schedule 40 Galvanized Steel Pipe in 21-foot lengths. Conforms to ASTM A53 Grade B with a 60,000 PSI tensile strength. The hot-dip zinc coating provides superior corrosion resistance for outdoor and high-moisture environments. This small diameter is ideal for plumbing, non-potable water lines, conduit, and residential handrails. In stock for same-day Los Angeles pickup. Learn More

1" x 1" Galvanized Steel Square Tube with a 16 gauge wall, sold in a 24-foot length. Conforming to ASTM A500 Grade B, this structural tubing provides a minimum yield strength of 46,000 PSI. The hot-dip galvanized zinc coating delivers excellent corrosion and rust resistance, making it ideal for outdoor frames, trailers, and gates. In stock for Los Angeles pickup. Learn More

This 14 x 1-1/2" Hex Washer Self-Drill Screw is an industrial-grade fastener designed for efficient metal-to-metal connections. It features a zinc-plated finish per ASTM B633 for corrosion resistance and complies with SAE J78 standards. The integrated neoprene washer provides a weather-tight seal. Learn More

Galvanized PBR sheet, 26 Gauge x 36 inches x 168 inches. Conforms to ASTM A653. Features a protective zinc coating for excellent corrosion resistance. The PBR (Purlin-Bearing Rib) profile provides structural strength for roofing and siding. Lightweight and durable, it's ideal for agricultural, commercial, and residential buildings. In stock Los Angeles. Learn More

This 14 x 1-1/4" Hex Washer Self-Drill Screw is a self-drilling fastener designed for rapid metal-to-metal connections. Compliant with SAE J78 standards, it features a zinc-plated finish (ASTM B633) for corrosion resistance and an integrated neoprene washer for a weatherproof seal. Learn More

The 14 x ¾” Hex Washer Self-Drill Screw is a high-performance fastener for metal-to-metal applications. Compliant with SAE J78 standards, it features a zinc plating (ASTM B633) for corrosion resistance and an integrated neoprene washer for a weatherproof seal. Learn More

This 14 x ¾" Hex Washer Self-Drilling Screw is designed for efficient metal-to-metal fastening. It complies with SAE J78 standards and features a zinc-plated finish per ASTM B633 for corrosion resistance. The integrated neoprene washer ensures a secure, weather-tight seal. Learn More

26 Gauge x 36" x 144" Galvanized PBR (Purlin Bearing Rib) sheet, compliant with ASTM A653. Features a protective zinc coating for excellent corrosion resistance and a minimum yield strength of 36,000 PSI. This lightweight, durable panel is ideal for commercial, residential, and agricultural roofing and siding applications requiring structural integrity and weather protection. In stock for Los Angeles pickup. Learn More

Our industrial-grade, oil-based white primer is an alkyd formulation designed for superior adhesion on metal surfaces. It provides an excellent foundation for topcoats, ensuring long-lasting corrosion protection for fabrication and MRO projects. Ideal for direct-to-metal (DTM) surface preparation. Learn More

Industrial Coating 218 is a high-performance alkyd and epoxy formulation designed for direct-to-metal (DTM) applications. This corrosion-resistant coating provides a durable finish for industrial MRO and fabrication projects, meeting key performance benchmarks. Learn More

This industrial-grade, oil-based gray primer provides exceptional adhesion and corrosion resistance for metal surfaces. Formulated as an alkyd coating, it creates a durable foundation for topcoats in demanding fabrication and MRO applications. Learn More

Our Industrial Grade Oil-Based White Primer is a high-solids, alkyd-based coating designed for superior adhesion and corrosion protection on metal surfaces. This direct-to-metal (DTM) primer provides a durable foundation for topcoats in demanding MRO and fabrication applications. Learn More

No. 41 Nickel-Plated Roller Chain in a convenient 10-foot length. This 1/2" pitch chain features a nickel-plated finish for enhanced corrosion resistance, ideal for outdoor applications like automatic gate openers. A direct replacement for Eagle-1000 series (Part# XM200), ensuring reliable performance and durability. In stock for immediate pickup in Los Angeles. Learn More

This 4-1/2" x .040" x 7/8" cut-off wheel is an industrial-grade abrasive engineered for high-speed cutting. It is ANSI B7.1 compliant and features fiberglass reinforcement for enhanced safety and durability during metal fabrication and MRO tasks. Learn More

Engineered for durability, this 1/2" x 4-1/2" masonry drill bit features a robust tungsten carbide tip for efficient drilling in concrete, brick, and block. It is manufactured to meet ANSI B212.15 standards, ensuring reliable performance in demanding construction and MRO applications. Learn More

3/4" diameter (#6) Grade 60 Hot Rolled Rebar, available in 20-foot (240") lengths. This reinforcing bar meets ASTM A615 standards and provides a minimum yield strength of 60,000 PSI. Its deformed surface ensures a strong mechanical bond with concrete, making it essential for foundations, slabs, and structural columns. In stock Los Angeles. Learn More

Industrial Coating 251V is a high-performance, direct-to-metal (DTM) alkyd enamel designed for superior corrosion protection. This industrial-grade coating provides a durable, weather-resistant finish for MRO and fabrication applications, formulated to meet MIL-SPEC performance criteria. Learn More

#4 (1/2") Grade 60 Hot Rolled Rebar, 20-foot length. Conforms to ASTM A615 with a minimum yield strength of 60,000 PSI. The deformed surface provides a superior mechanical bond with concrete, making it essential for reinforcing foundations, slabs, and columns. This medium-diameter bar offers a standard balance of strength and ductility for structural applications. In stock for Los Angeles pickup. Learn More

Grade 60 Hot Rolled Rebar, #8 size (1" diameter) in a 20-foot length. Conforming to ASTM A615, this reinforcing bar provides a minimum yield strength of 60,000 PSI for structural concrete applications. Its deformed surface ensures a strong mechanical bond, making it essential for reinforcing foundations, slabs, columns, and retaining walls. In stock for Los Angeles pickup. Learn More

This Heavy Duty Regal Cutter Set includes two robust utility cutters (2-1/2" and 3-7/8") designed for demanding tasks in any workshop or job site. Featuring durable construction and sharp, reliable blades, this set is perfect for cutting a variety of materials with precision and control. An essential tool for fabricators, shippers, and installers. In stock for Los Angeles pickup. Learn More

This 12" x 7/64" Cut-Off Wheel is an industrial-grade abrasive tool compliant with ANSI B7.1 safety standards. Engineered with fiberglass reinforcement for a maximum speed of 5,100 RPM, it is designed for fast, clean cuts on various metals. The 1" arbor hole fits standard stationary cut-off machines. Learn More

This industrial-grade, direct-to-metal (DTM) semi-gloss black paint is an alkyd-based enamel designed for superior corrosion protection. It provides a durable, weather-resistant finish on metal surfaces without requiring a separate primer, making it ideal for MRO and fabrication projects. Learn More

This industrial-grade HP Air Spray Gun features a durable aluminum body, a 1.88mm nozzle, and a 1000cc aluminum cup. Engineered for high-volume application, it provides excellent atomization for industrial primers, topcoats, and DTM coatings meeting MIL-SPEC performance criteria. Learn More

Industrial Hardware Consumable 218 is a high-performance solution for MRO and fabrication. Formulated to meet key industrial performance standards like ASTM C557, this product ensures durability for demanding applications on metal surfaces. Ideal for corrosion protection and general maintenance tasks. Learn More

The C199XL is an industrial-grade ornamental cap rail fitting designed for durability and a precise fit. Engineered from high-quality metals for architectural applications, it is a key component for constructing robust, ADA-compliant handrail systems. Learn More

6-inch Nominal Pipe Size (NPS) Schedule 40 Galvanized Pipe, 252-inch length. Conforms to ASTM A53 Grade B, delivering 60,000 PSI tensile strength and excellent weldability. The hot-dip zinc coating provides superior corrosion resistance for outdoor and high-moisture environments. Large diameter is ideal for main water lines, industrial process piping, and heavy structural columns. In stock Los Angeles. Learn More

3/4" x 16 gauge Galvanized Square Tube, 24' length. Conforms to ASTM A500 Grade B with a 58,000 PSI tensile strength. The hot-dip zinc coating provides excellent corrosion resistance for outdoor applications. This small-profile tube is ideal for lightweight frames, gates, railings, and agricultural structures. In stock for immediate pickup in Los Angeles. Learn More

1-1/4" x 1-1/4" Galvanized Square Tube with a 16 gauge wall, sold in 24-foot lengths. Manufactured to ASTM A500 Grade B standards, this structural tubing has a 58,000 PSI tensile strength. The hot-dip galvanized zinc coating provides excellent corrosion resistance for outdoor applications. Ideal for structural frames, gates, trailer construction, and railings. In stock for Los Angeles pickup. Learn More

This 4” x 1/16” x ⅜” cut-off wheel is an industrial-grade abrasive tool for high-speed cutting. Compliant with ANSI B7.1 safety standards, it features fiberglass reinforcement for enhanced durability and stability at its maximum 22,000 RPM rating. Learn More

This 10" x 1/8" x 1" abrasive cut-off wheel is engineered for high-speed metal cutting applications. Featuring fiberglass reinforcement for durability and safety, it is fully compliant with ANSI B7.1 standards. Designed for tools operating at or below a maximum speed of 6,100 RPM. Learn More

This 1/2" x 4-1/2" industrial masonry drill bit is engineered for high-performance drilling in concrete, brick, and block. It features a durable tungsten carbide tip and complies with ANSI B212.15 standards, ensuring precision and long service life for demanding applications. Learn More

This Safety Yellow industrial coating features advanced Direct-to-Metal (DTM) oil-based alkyd technology for superior adhesion and corrosion protection. It provides a durable, high-visibility finish ideal for MRO and equipment applications, meeting industrial performance benchmarks. Learn More

Grade 60 Hot Rolled Rebar, #7 size (7/8" diameter) in 20-foot lengths. Meets ASTM A615 standards with a minimum yield strength of 60,000 PSI and tensile strength of 90,000 PSI. Its deformed surface provides a superior mechanical bond with concrete, making it essential for reinforcing foundations, slabs, and columns. In stock for same-day Los Angeles pickup. Learn More

#3 (3/8") Grade 60 Hot Rolled Rebar, 20-foot length. Meets ASTM A615 specifications and features a minimum yield strength of 60,000 PSI and a deformed surface for superior mechanical bond with concrete. This standard reinforcing bar is essential for adding tensile strength to foundations, slabs-on-grade, and retaining walls. In stock for same-day Los Angeles pickup. Learn More

Size 12 rubber boots with a 16" height for maximum protection. Designed for industrial and construction environments, these boots feature a waterproof, seamless construction and a slip-resistant tread for safety on wet surfaces. Durable and flexible for all-day comfort. In stock for immediate pickup at our Los Angeles location. Learn More

2-1/2" NPS Schedule 40 Hot Rolled Black Pipe, 21 ft length. Manufactured to ASTM A53 Grade B with 60,000 PSI tensile strength. This large-diameter pipe offers excellent weldability for plumbing, fire protection systems, and structural applications. Its thicker wall provides high-pressure ratings and structural integrity for main water lines, industrial process piping, and support columns. In stock for Los Angeles pickup. Learn More

The Eagle-2000-FR is a heavy-duty 1HP slide gate opener engineered for commercial and industrial applications. It reliably moves gates up to 45 feet long and weighing 2000 lbs. This complete kit includes two remotes, a receiver, and an EG111 monitored photo eye for enhanced safety and convenience. Its foot release mechanism ensures easy manual operation during power outages. In stock in Los Angeles. Learn More

This industrial-grade 5/16" x 4-1/2" masonry drill bit is engineered for high-performance drilling in concrete, brick, and block. It features a durable tungsten carbide tip for extended life and precision, manufactured to meet ANSI B212.15 standards. Learn More

Size 9-1/2 industrial rubber boots with a 16" height for maximum coverage. Built for demanding job site conditions, these waterproof boots offer reliable protection against water, mud, and debris. The durable rubber construction and treaded, slip-resistant sole provide safety and comfort for fabricators, construction workers, and maintenance personnel. In stock for Los Angeles pickup. Learn More

2-1/2" x 2-1/2" 6061-T6 Aluminum Square Bar, sold in 144" lengths. Conforming to ASTM B211, this bar offers high strength with a 45,000 PSI tensile rating, excellent weldability, and superior corrosion resistance. Its large cross-section is ideal for structural framing, heavy-duty machinery bases, and large machined fixtures. In stock for same-day Los Angeles pickup. Learn More

Size 9 industrial-grade rubber rain boots featuring a 16-inch height for superior protection in wet and muddy conditions. Built with a 100% waterproof, seamless construction and a slip-resistant lug outsole for secure traction on demanding job sites. Ideal for construction, landscaping, and general maintenance work. In stock for Los Angeles pickup. Learn More

The 1-1/2 Inch Post Ball Cap is a high-quality ornamental hardware component designed for fencing and architectural applications. Fabricated from durable Class 25-30 gray iron or A356 aluminum, it provides a classic, finished look to any metal post. This decorative cap is engineered for a precise fit on 1-1/2 inch square or round tubing. Learn More

The 4 Inch Post Ball Cap is a decorative finial designed for fence posts and railings. Crafted from durable Class 25-30 gray iron, it provides a classic architectural finish for ornamental and security fencing projects. This cap is designed to fit standard 4-inch square or round posts. Learn More

A versatile, industrial-grade lacquer thinner for reducing paint viscosity and cleaning metal surfaces. This fast-evaporating solvent ensures optimal paint flow and prepares substrates for DTM coatings. Ideal for use with alkyd and oil-based industrial paints. Learn More

3/4" OD x 0.125" wall 6061-T6 Aluminum Round Tube, 144" length. This versatile tubing conforms to ASTM B210, offering 45,000 PSI tensile strength, excellent weldability, and superior corrosion resistance. Its high strength-to-weight ratio and small diameter make it ideal for lightweight structural frames, furniture, custom automotive parts, and support braces. In stock for same-day Los Angeles pickup. Learn More

1" OD x 0.125" wall 6061-T6 Aluminum Round Tube, supplied in a 144" length. This versatile alloy conforms to ASTM B210 and offers 45,000 PSI tensile strength, excellent weldability, and superior corrosion resistance. Its high strength-to-weight ratio makes it ideal for structural frames, equipment supports, railings, and automotive components. In stock for immediate Los Angeles pickup. Learn More

6063 Aluminum Channel with 1/2" height, 1/2" width, and 1/8" wall thickness. Conforms to ASTM B308, offering 27,000 PSI tensile strength, excellent corrosion resistance, and a superior surface finish. Known as the "architectural alloy," this small profile is ideal for decorative trim, window frames, signage, and custom enclosures. In stock Los Angeles. Learn More

3/4" NPS 6063-T5 Aluminum Pipe with a Schedule 40 wall, in 240" lengths. Conforms to ASTM B241 with 27,000 PSI tensile strength. Known as architectural aluminum, this grade offers a superior surface finish, excellent corrosion resistance, and great weldability. Ideal for handrails, display frames, and low-pressure fluid transfer. In stock Los Angeles. Learn More

1" NPS Schedule 40 Aluminum Pipe, manufactured from 6063-T5 aluminum alloy. Conforming to ASTM B241, this pipe offers excellent corrosion resistance and a superior surface finish ideal for anodizing. With a tensile strength of 27,000 PSI, it provides a great balance of strength and workability for architectural applications like handrails, frames, and trim. In stock for Los Angeles pickup. Learn More

6063-T5 Aluminum Pipe with a 1-1/2 inch nominal size and standard Schedule 40 wall thickness. This seamless extruded pipe conforms to ASTM B241 specifications and offers 27,000 PSI tensile strength. Known as "architectural aluminum," its excellent corrosion resistance and superior surface finish make it ideal for handrails, frames, and furniture. In stock for immediate cutting and pickup in Los Angeles. Learn More

2-inch Nominal Pipe Size (NPS) 6063-T5 Aluminum Pipe with a Schedule 40 wall, in a 240-inch length. Conforms to ASTM B241 standards with 27,000 PSI tensile strength. Known as architectural aluminum, it offers excellent corrosion resistance and a superior surface finish, making it ideal for handrails, frames, and display fixtures. In stock for same-day Los Angeles pickup. Learn More

This 5-inch tube ring is crafted from high-quality Class 25-30 gray cast iron, providing excellent durability for ornamental and architectural applications. Designed for seamless integration with standard tubing for fences, gates, and handrails. Learn More

The Eagle-1 is a complete slide gate operator kit for residential applications. Its powerful 1/2 HP continuous-duty motor handles gates up to 18 feet and 300 lbs. This easy-to-install package includes two wireless remotes and a monitored reflective photo eye for enhanced security and safety. Ideal for automating driveway gates with reliable performance. In stock Los Angeles. Learn More

The Eagle 1000 FSC is a 1/2 HP continuous duty sliding gate operator for residential and light commercial applications. It handles rolling gates up to 27 feet and 600 lbs with a 12" per second travel speed. Features include 2-wire master/slave, auto-close timer, and a fail-safe manual crank release. In stock for Los Angeles pickup. Learn More

The Eagle-1000 FR is a robust 1/2 HP slide gate operator designed for residential and light commercial applications. It handles gates up to 27 feet and 600 lbs with a continuous duty motor. This complete kit includes two remotes, a receiver, and a photo eye safety monitor for a secure and convenient access control solution. In stock for same-day pickup in Los Angeles. Learn More

The Eagle EG642 is a 1-button visor remote transmitter featuring advanced rolling code technology for secure access control. Its universal design is compatible with a wide range of gate and garage door openers. Built for reliability, this remote offers simple push-button programming and a convenient visor clip for in-vehicle use. In stock for same-day pickup in Los Angeles. Learn More

The EG654 Eagle Chrome Wireless Keypad provides secure, convenient access control for gates and doors. Featuring 2-channel operation and advanced rolling code technology, it prevents unauthorized access. Simple push-button programming makes setup fast. Fully compatible with Eagle EG650 and EG652 universal receivers, it's ideal for residential, multi-unit, and commercial properties. In stock for immediate pickup in Los Angeles. Learn More

Durable 5/8 Inch Square Plastic Caps designed for a secure, press-fit on square tubing. Made from industrial-grade, weather-resistant plastic, these caps provide a clean, finished appearance while protecting against dirt, moisture, and sharp edges. Ideal for fencing, furniture, and equipment fabrication. Learn More

This 1 Inch Square Plastic Cap provides a durable, finished look for square tubing. Made from UV-resistant LDPE plastic, it protects against moisture and debris. Ideal for fencing, furniture, and fabrication projects. Learn More

The 1-1/4 Inch Square Plastic Cap provides a clean, finished look for square tubing applications. Made from durable, weather-resistant black plastic, it protects against sharp edges and internal debris. This cap offers a secure press-fit for reliability in fencing, furniture, and equipment fabrication. Learn More

Durable 1-1/2 inch square plastic cap designed for a secure fit on square tubing. Made from high-quality, weather-resistant Low-Density Polyethylene (LDPE), this cap provides a clean, finished appearance and protects against debris. Learn More

A compact and secure 10-digit mini garage door and gate opener with keychain. Built with industrial-grade components for reliable access control in commercial and MRO applications. Features a durable, weather-resistant casing for long-lasting performance. Learn More

Protect your hands with our industrial-grade Goat Leather Driving Gloves. These gloves are rated to ANSI/ISEA 105 standards, providing excellent dexterity and durability for material handling. The premium goat leather construction ensures a comfortable fit and reliable protection for MRO and fabrication tasks. Learn More

A durable 3 lb rubber mallet featuring a 3-inch non-marring face and a 14-inch overall length. The solid rubber head delivers firm, controlled blows without damaging metal surfaces, wood, or delicate components. Its balanced hardwood handle provides a comfortable grip for precise work in fabrication, woodworking, and general assembly. In stock Los Angeles. Learn More

The Eagle EG650 Universal Receiver upgrades your gate operator with secure rolling code technology. It can store and manage up to 30 Eagle Chrome Series remote transmitters, making it ideal for residential or small commercial applications. This receiver is designed for easy integration with a wide range of gate and garage door openers, enhancing security and convenience. In stock for same-day pickup in Los Angeles. Learn More

The ACCESS 10 Transmitter is a durable, 10-digit remote for commercial garage doors and gates. Engineered for reliability and UL/CSA certified, it ensures secure access for MRO and facility management applications. Features a robust industrial polymer casing for long-term use. Learn More

Our industrial-grade Black Nitrile Disposable Gloves offer superior puncture and chemical resistance. These powder-free gloves are ANSI/ISEA 105 rated for reliable hand protection in demanding MRO, fabrication, and general-purpose applications. Packaged in a convenient 100-piece box. Learn More

These superior performance work gloves feature a durable nitrile coating for enhanced grip and protection. Rated to ANSI/ISEA 105 standards, they are designed for demanding industrial applications, providing both dexterity and durability for material handling and assembly. Learn More

Size 10, 16-inch heavy-duty rubber rain boots. Designed for maximum protection in wet and muddy environments, these boots feature 100% waterproof construction and a rugged, slip-resistant outsole for secure footing on slippery surfaces. The durable yet flexible rubber material ensures all-day comfort for construction, landscaping, and general industrial use. In stock for immediate pickup at our Los Angeles location. Learn More

Size 11 rubber work boots with a 16-inch height, providing substantial waterproof protection for demanding job sites. Designed for durability and comfort in wet conditions, these boots are essential safety gear for construction, landscaping, and industrial applications. Keep your feet dry and protected with this reliable footwear, in stock for pickup in Los Angeles. Learn More

Enhance worksite safety with high-visibility orange reflectorized vests. Constructed from durable, lightweight polyester mesh with reflective strips for maximum visibility, this free-size vest is essential PPE for construction and industrial environments. Learn More

Protect your vision with industrial-grade Standard Goggles. Featuring durable, impact-resistant polycarbonate lenses that are ANSI/ISEA Z87.1+ rated for high-velocity impact. The integrated anti-fog coating ensures clear vision in demanding work environments. Learn More

This industrial-grade construction adhesive provides a high-strength bond for a wide range of materials. Compliant with ASTM C557 standards, it is engineered for reliability in demanding construction, fabrication, and MRO applications. Learn More

This industrial-grade construction adhesive meets ASTM C557 standards, ensuring a high-strength, reliable bond for professional use. Its versatile formulation is engineered for demanding fabrication, construction, and MRO applications on various substrates. Learn More

This industrial-grade construction adhesive is engineered for high-strength bonding in demanding applications. Compliant with ASTM C557 standards, it provides a reliable bond for a wide range of materials used in MRO and fabrication projects. Ideal for securing metal, wood, and composite surfaces. Learn More

Product 217 is an industrial-grade construction adhesive engineered to meet ASTM C557 standards. This high-strength adhesive provides a durable, permanent bond for a wide range of fabrication, MRO, and construction applications on various materials. Learn More

This industrial-grade construction adhesive provides a high-strength bond for a wide range of materials. Formulated to meet ASTM C557 standards, it ensures reliable performance for demanding fabrication, construction, and MRO applications. Ideal for bonding wood, metal, concrete, and masonry. Learn More

Our industrial-grade construction adhesive offers superior bonding strength for a wide range of materials. This high-performance adhesive is formulated to meet ASTM C557 standards, ensuring reliable performance for demanding fabrication and MRO applications. Learn More

Our 260 Construction Adhesive is a high-strength formulation engineered for demanding industrial applications. Compliant with ASTM C557, this adhesive provides a durable, reliable bond for a wide range of construction and fabrication materials. Learn More

The C199 is a durable cast iron component designed for 1-1/2" cap rail systems. This ornamental hardware is engineered for a precise fit in ADA-compliant handrail and fencing applications, providing both structural integrity and a decorative finish. Learn More

The C199L is a decorative handrail fitting for 1-1/4" cap rails. Manufactured from durable Class 25-30 gray iron, this component provides a secure and aesthetic termination for architectural and ADA-compliant railing systems. Learn More