Search results for: 'This they'

Our Industrial-Grade Gloss Black DTM Paint is a high-performance alkyd coating designed for direct application on metal. It provides excellent corrosion resistance and a durable, high-gloss finish suitable for demanding fabrication and MRO environments. Learn More

Our industrial-grade, oil-based white primer is an alkyd formulation designed for superior adhesion on metal surfaces. It provides an excellent foundation for topcoats, ensuring long-lasting corrosion protection for fabrication and MRO projects. Ideal for direct-to-metal (DTM) surface preparation. Learn More

5/8" x 5/8" 6061-T6 Aluminum Square Bar, sold in 144" lengths. Conforms to ASTM B211, offering a high strength-to-weight ratio with 40,000 PSI yield strength. Known for excellent machinability, weldability, and corrosion resistance, it's ideal for structural frames, support brackets, and precision machined parts. In stock for immediate cutting and pickup in Los Angeles. Learn More

1" x 1" 1018 Cold Rolled Steel Square Bar, 144" length. Conforms to ASTM A108 and offers 63,800 PSI tensile strength, a clean surface finish, and tight dimensional tolerances. Its excellent machinability (70% vs 1212) makes it ideal for shafts, dowels, fixtures, and precision machined components. In stock for same-day cutting and Los Angeles pickup. Learn More

The 1/8" Cobalt Drill Bit is engineered from M35 steel with 5% cobalt for superior heat resistance when drilling hard metals. Featuring a 135° split-point geometry for precision, it is ideal for stainless steel and cast iron applications compliant with ANSI/ASME B94.11M standards. Learn More

Our 2 Inch Square Plastic Cap is an industrial-grade finishing component made from durable, low-density polyethylene (LDPE). It provides a secure, press-fit closure for square tubing, protecting against moisture and debris while offering a clean, professional appearance. Learn More

Protect high-traffic areas with our Galvanized Corner Guard. Made from durable 16 gauge steel with a G90 galvanized coating for superior corrosion resistance, conforming to ASTM A653 standards. Ideal for industrial, commercial, and MRO applications requiring robust wall and corner protection. Learn More

The 1-¼” Single Lockbox with a single hole is an essential component for security gates and fences. Constructed from high-quality, weldable steel, it provides a durable housing for gate locks. Designed for easy installation and long-term performance in commercial and residential applications. Learn More

The 14 x 2” Hex Washer Self-Drill Screw is a high-performance fastener engineered to SAE J78 standards. It features a hardened steel point for drilling into metal without a pilot hole and a bonded neoprene washer for a weather-tight seal. The zinc plating, compliant with ASTM B633, provides excellent corrosion resistance for exterior applications. Learn More

Hanover Green DTM is an industrial-grade, direct-to-metal coating engineered for superior corrosion protection. Its durable alkyd formulation provides a long-lasting, semi-gloss finish on steel surfaces, ideal for professional fabrication and MRO. Learn More

Metalize Industrial Primer is a high-performance alkyd coating engineered for superior corrosion resistance on metal surfaces. Formulated to meet rigorous MIL-SPEC performance criteria, it provides an excellent foundation for DTM (Direct-to-Metal) applications. Ideal for demanding industrial, MRO, and fabrication projects. Learn More

1-1/2" OD x 0.065" wall 304 Stainless Steel Round Tube, supplied in 20-foot lengths. Conforms to ASTM A269, featuring a 73,200 PSI tensile strength, excellent weldability, and corrosion resistance. The 180 grit polished finish provides a clean, decorative appearance ideal for architectural handrails, equipment frames, and structural supports. In stock for immediate Los Angeles pickup. Learn More

1-1/4" x 1-1/4" 304 Stainless Steel Square Tube with a 0.065" wall and a 180-grit satin finish. Conforming to ASTM A269, it offers 73,200 PSI tensile strength, excellent corrosion resistance, and superior weldability. Its combination of structural integrity and polished appearance makes it ideal for architectural handrails, support frames, and decorative applications. In stock for Los Angeles pickup. Learn More

1/2" diameter Cold Rolled Steel All Thread Rod with an oil finish, supplied in 120" lengths. Made from low-carbon steel, it meets the strength requirements of ASTM A307 Grade A and offers 63,800 PSI tensile strength. The continuous threading provides versatile fastening for construction, manufacturing, and general repair. In stock for Los Angeles pickup. Learn More

4" x 1/4" Cold Rolled Flat Bar, 144" length, made from 1018 low-carbon steel. Conforms to ASTM A108 standards, offering 63,800 PSI tensile strength, tight dimensional tolerances, and a smooth, scale-free finish. Its excellent machinability and weldability make it a reliable choice. The large width is ideal for base plates, heavy structural components, and machine frames. In stock for same-day Los Angeles pickup. Learn More

1/2" x 2" 1018 Cold Rolled Flat Bar, 144" length. Conforms to ASTM A108, offering a smooth, scale-free finish and tight dimensional tolerances. With a tensile strength of 63,800 PSI and excellent machinability, it's ideal for manufacturing brackets, base plates, and machine ways where precision is required. In stock for immediate Los Angeles pickup. Learn More

6" x 1/2" 1018 Cold Rolled Steel Flat Bar, 144" length. Conforms to ASTM A108 with 63,800 PSI tensile strength and excellent machinability. The cold drawing process provides tight dimensional tolerances and a smooth, scale-free finish. Its substantial 6-inch width makes it ideal for base plates, heavy structural components, and die sets. In stock for Los Angeles pickup. Learn More

1 inch 1018 Cold Rolled Steel Hexagon Bar, 144-inch length. Conforms to ASTM A108 standards, delivering 63,800 PSI tensile strength and excellent machinability. Its smooth finish and tight tolerances make it ideal for fasteners, nuts, hydraulic fittings, and machined components requiring a hex shape for gripping. In stock for same-day Los Angeles pickup. Learn More

6-inch Nominal Pipe Size (NPS) Schedule 40 Galvanized Pipe, 252-inch length. Conforms to ASTM A53 Grade B, delivering 60,000 PSI tensile strength and excellent weldability. The hot-dip zinc coating provides superior corrosion resistance for outdoor and high-moisture environments. Large diameter is ideal for main water lines, industrial process piping, and heavy structural columns. In stock Los Angeles. Learn More

Galvanized PBR sheet, 26 Gauge x 36 inches x 168 inches. Conforms to ASTM A653. Features a protective zinc coating for excellent corrosion resistance. The PBR (Purlin-Bearing Rib) profile provides structural strength for roofing and siding. Lightweight and durable, it's ideal for agricultural, commercial, and residential buildings. In stock Los Angeles. Learn More

A36 Hot Rolled Steel Flat Bar, 3 inches wide by 3/8 inch thick. Conforms to ASTM A36 standards with a minimum yield strength of 36,000 PSI and excellent weldability for easy fabrication. Its medium size is ideal for structural braces, equipment mounts, base plates, and general repairs. In stock for Los Angeles pickup. Learn More

3/4" x 1/2" Hot Rolled Steel Flat Bar, 240" length. A versatile structural steel conforming to ASTM A36 with 36,000 PSI minimum yield strength. Known for its excellent weldability and good formability. The small width is ideal for fabricating custom brackets, support straps, shims, and light-duty frames. In stock for immediate Los Angeles pickup. Learn More

11 Gauge (0.120") x 48" x 120" A36 Hot Rolled Steel Sheet. ASTM A36 certified, with a minimum yield strength of 36,000 PSI and excellent weldability. The medium thickness is ideal for structural panels, machine guards, trailer frames, and general fabrication. The hot rolled mill finish is suitable for applications where finish is secondary to strength. In stock for same-day Los Angeles pickup. Learn More

3/4" x 16GA Hot Rolled Steel Square Tube, 240" length. Conforms to ASTM A500 Grade B with 58,000 PSI tensile strength and excellent weldability. Ideal for lightweight structural applications like frames, supports, and general fabrication. Its small profile is suited for gate frames, equipment guards, and bracing. In stock for Los Angeles pickup. Learn More

1/2" x 1/2" A36 Hot Rolled Steel Square Bar, 240" length. Conforms to ASTM A36 with 36,000 PSI minimum yield strength and excellent weldability. Its balance of strength and cost-effectiveness makes it a foundational material for fabrication. The medium 1/2" size is ideal for equipment frames, support braces, and structural repairs. In stock for Los Angeles pickup. Learn More

1" x 3/8" 1018 Cold Rolled Steel Flat Bar, 144" length. Conforms to ASTM A108 with 63,800 PSI tensile strength and excellent machinability. The cold drawing process provides a smooth, scale-free surface and tight dimensional tolerances. Ideal for base plates, mounting brackets, and machine components requiring precision without extensive finishing. In stock for Los Angeles pickup. Learn More

1018 Cold Rolled Steel Flat Bar, measuring 1" wide by 3/4" thick in a 144" length. Conforms to ASTM A108 and offers 63,800 PSI tensile strength. The cold drawn process provides tight dimensional tolerances and a clean, smooth surface ideal for machining and welding. Excellent for fabricating brackets, base plates, and machine components. In stock Los Angeles. Learn More

24 Gauge Galvanized B-Deck sheet measuring 36" wide by 96" long. Produced from zinc-coated carbon steel conforming to ASTM A653, it provides excellent corrosion resistance and structural integrity. The 'B' profile is engineered for high strength-to-weight performance, making it ideal for roof decks, mezzanine floors, and structural siding applications. In stock for immediate Los Angeles pickup. Learn More

1-1/2" x 16 Gauge Galvanized Square Tube, sold in 24-foot lengths. Conforms to ASTM A500 Grade B with 58,000 PSI tensile strength. The hot-dip zinc coating provides excellent corrosion resistance for outdoor applications. Its medium size is ideal for trailer frames, gate construction, and structural supports. In stock for same-day Los Angeles pickup. Learn More

The 4 Sq Pressed Steel Cap provides a durable, clean finish for square tubing and fence posts. Fabricated from high-quality pressed steel for excellent weldability and longevity. Ideal for ornamental ironwork and security fencing projects. Learn More

Our 6-inch rubber roller is an industrial-grade component designed for durability and smooth operation. Constructed from high-traction rubber on a robust core, it is ideal for material handling systems and heavy-duty MRO applications. Learn More

The 251V is a high-quality decorative ornamental element crafted from Class 25-30 gray iron. Its durable composition is ideal for architectural detailing, custom fencing, gates, and other fabrication projects requiring classic, robust designs. Learn More

Our 12-inch industrial door spring is engineered from high-tensile spring steel for maximum durability and cycle life. Designed to meet ASTM A227/A228 performance standards, it provides reliable tension for heavy-duty commercial and industrial doors. Features a corrosion-resistant zinc-plated finish for long-lasting use. Learn More

Durable 16-gauge galvanized steel slotted angle with 1-1/4" legs for superior corrosion resistance. The pre-punched pattern allows for easy, bolt-together assembly in framing, shelving, and MRO applications. Ideal for creating custom racks and supports. Learn More

Durable 16 gauge galvanized steel slotted angle for versatile framing and support applications. Features a G90 galvanized coating for superior corrosion resistance. Ideal for industrial shelving, equipment bracing, and general MRO fabrication projects. Learn More

Durable 1-1/4" x 1-1/4" x 16GA Galvanized Slotted Angle for versatile framing and support applications. Made from commercial-grade, corrosion-resistant galvanized steel conforming to ASTM A653 standards, it is ideal for constructing custom shelving, racks, and braces. Pre-punched slots allow for easy bolt-together assembly. Learn More

Galvanized Slotted Angle is a versatile framing material made from durable 16 gauge steel. Featuring a corrosion-resistant galvanized finish meeting ASTM A653 standards, it's ideal for constructing custom racks, supports, and maintenance frames. The pre-punched slotted pattern allows for easy, bolt-together assembly. Learn More

The Bobco Auto-Darkening Welding Helmet offers superior protection, meeting ANSI/ISEA Z87.1+ safety standards. Featuring a 3.67” x 1.70” viewing area and a lightweight 1.07lb polycarbonate body, it ensures comfort and clarity for professional fabrication and MRO tasks. Learn More

The Bobco Mini Portable Welding Machine is a versatile dual-voltage (110V/220V) unit designed for stick welding. It is compatible with AWS-certified electrodes from 1/16" to 1/8" in diameter, delivering reliable performance for light fabrication, repair, and MRO tasks. Learn More

The 1/2" x 5" Power Bull Anchor is a heavy-duty carbon steel fastener designed for anchoring into concrete. Featuring a zinc-plated finish per ASTM B633 for corrosion resistance, it provides reliable holding power for structural and MRO applications. Includes nut and washer for complete installation. Learn More

The C199XL is an industrial-grade ornamental cap rail fitting designed for durability and a precise fit. Engineered from high-quality metals for architectural applications, it is a key component for constructing robust, ADA-compliant handrail systems. Learn More

The C45 Cap Rail is an industrial-grade ornamental fitting forged from Class 25-30 gray cast iron. It is designed with a 1-¾” width to securely fit over a standard 1-½” rail, providing a durable and decorative finish for handrail and fencing systems. Learn More

2-inch Nominal Pipe Size (NPS) 6063-T5 Aluminum Pipe with a Schedule 40 wall, in a 240-inch length. Conforms to ASTM B241 standards with 27,000 PSI tensile strength. Known as architectural aluminum, it offers excellent corrosion resistance and a superior surface finish, making it ideal for handrails, frames, and display fixtures. In stock for same-day Los Angeles pickup. Learn More

5/16 inch diameter 1018 Cold Rolled Round Bar, sold in 144-inch lengths. Conforms to ASTM A108 specifications, offering 63,800 PSI tensile strength, tight dimensional tolerances, and excellent machinability. Its smooth, scale-free surface is ideal for precision parts like pins, dowels, small shafts, and fastener blanks. In stock for same-day Los Angeles pickup. Learn More

2" Nominal Pipe Size (NPS) Galvanized Steel Pipe, Schedule 40 wall, 21-foot length. Conforms to ASTM A53 Grade B with 60,000 PSI tensile strength. The hot-dip zinc coating provides excellent corrosion resistance for outdoor and high-moisture use. Ideal for plumbing mains, HVAC piping, handrails, and structural posts. In stock for same-day Los Angeles pickup. Learn More

Grade 60 Hot Rolled Rebar, #7 size (7/8" diameter) in 20-foot lengths. Meets ASTM A615 standards with a minimum yield strength of 60,000 PSI and tensile strength of 90,000 PSI. Its deformed surface provides a superior mechanical bond with concrete, making it essential for reinforcing foundations, slabs, and columns. In stock for same-day Los Angeles pickup. Learn More

3" x 3" x 0.25" wall Hot Rolled Steel Square Tube, sold in 20-foot lengths. Made from A500 Grade B structural steel, it offers a minimum yield strength of 46,000 PSI and excellent weldability. Ideal for equipment frames, structural supports, handrails, and general fabrication projects requiring a high strength-to-weight ratio. In stock for immediate Los Angeles pickup. Learn More

1-1/4" OD x 0.120" wall 304 Stainless Steel Round Tube. Conforms to ASTM A269, featuring 73,200 PSI tensile strength, excellent weldability, and corrosion resistance. Polished to a 180 grit finish for architectural and decorative applications. Medium diameter is ideal for handrails, equipment frames, and structural supports. Available for same-day pickup in Los Angeles. Learn More

20 Gauge (4' x 10') 304 Stainless Steel Sheet with a #4 brushed finish and protective PVC coating. Conforms to ASTM A240 with 73,200 PSI tensile strength, excellent formability, and corrosion resistance. The thin gauge is ideal for architectural trim, kitchen backsplashes, and protective paneling. In stock for immediate Los Angeles pickup. Learn More

26 Gauge Galvanized Steel PBR (Purlin Bearing Rib) Sheet, measuring 36 inches wide by 96 inches long. Conforms to ASTM A653, offering excellent corrosion resistance from its protective zinc coating. The base steel provides a minimum 36,000 PSI yield strength for structural integrity. Ideal for residential roofing, commercial siding, and agricultural building applications. In stock and ready for pickup in Los Angeles. Learn More

4" Hot Rolled Standard I-Beam (S-Beam) manufactured from A36 carbon steel. Conforms to ASTM A36 with a minimum yield strength of 36,000 PSI and excellent weldability. The 4" height and 7.7 lbs/ft weight provide high strength for structural applications, including building frames, machinery bases, and support trusses. In stock for Los Angeles pickup. Learn More

2" x 2" x 0.250" wall Hot Rolled Steel Square Tube in 240" lengths. Conforms to ASTM A500 Grade B, offering a minimum yield strength of 46,000 PSI and excellent weldability for structural applications. Its robust, medium-sized construction is ideal for equipment frames, trailer manufacturing, roll cages, and general fabrication projects requiring high strength. In stock and available for same-day pickup in Los Angeles. Learn More

Size 12 rubber boots with a 16" height for maximum protection. Designed for industrial and construction environments, these boots feature a waterproof, seamless construction and a slip-resistant tread for safety on wet surfaces. Durable and flexible for all-day comfort. In stock for immediate pickup at our Los Angeles location. Learn More

Our Spring Loaded Wheel with 3 Casters is an industrial-grade solution for material handling equipment. Engineered to support dynamic load ratings from 200 to 2000 lbs, it provides superior shock absorption and smooth mobility for carts, racks, and dollies. The durable steel construction ensures reliability in demanding warehouse and fabrication environments. Learn More

Galvanized Slotted Angle is a versatile steel framing component ideal for constructing custom racks, shelves, and supports. Its galvanized finish provides excellent corrosion resistance, while the 16-gauge thickness ensures reliable performance for light to medium-duty MRO and fabrication projects. Learn More

The Bobco Auto Darkening Weld Helmet provides superior protection, meeting ANSI/ISEA Z87.1+ standards for impact resistance. It features a large 3.94” x 3.15” viewing area for maximum visibility and is constructed from a lightweight, durable high-impact resistant material. Learn More

Our 4-inch Tube Ring is a high-quality decorative component forged from industrial-grade Class 25-30 gray cast iron. Designed for durability and easy integration, it's ideal for ornamental fencing, gates, and architectural fabrication projects. Learn More

Our 3-Inch Rubber Roller is an industrial-grade component designed for material handling and fabrication. Features a durable, high-traction rubber surface on a steel core, engineered for consistent performance in MRO and production environments. Learn More

The Eagle 1000 FSC is a 1/2 HP continuous duty sliding gate operator for residential and light commercial applications. It handles rolling gates up to 27 feet and 600 lbs with a 12" per second travel speed. Features include 2-wire master/slave, auto-close timer, and a fail-safe manual crank release. In stock for Los Angeles pickup. Learn More

The Bobco Welding Machine MMA 160 is a portable, high-performance stick welder designed for industrial use. It delivers a stable 160-amp arc, ideal for use with AWS/ASME certified electrodes like 6010, 6013, and 7018. Its durable construction ensures reliability for both fabrication and MRO projects. Learn More

Our 12-inch rubber roller is an industrial-grade component designed for high-load capacity material handling. Featuring a durable, non-marring rubber surface bonded to a steel core, it provides smooth movement for conveyor systems and industrial carts. Engineered to meet demanding MRO and fabrication requirements. Learn More

A 1/2" x 4" Hex Lag Screw featuring a protective zinc plating per ASTM B633. Manufactured from low carbon steel compliant with ASTM A307 standards for reliable performance in light-duty framing and construction. Learn More

Our 3-1/2x2-1/4 Weldable Butt Hinges are engineered from high-strength, low-carbon steel for maximum weld penetration and durability. These components are designed for heavy-duty applications where a permanent, strong pivot is required. Ideal for steel gates, doors, and MRO projects. Learn More

5/8" diameter Cold Rolled All Thread Rod in a 10 ft length, featuring a zinc-plated finish for corrosion resistance. Made from low-carbon steel that meets the strength requirements of ASTM A307 Grade A. Offers good weldability and strength for general-purpose fastening, bracing, and support applications in construction and manufacturing. In stock for immediate Los Angeles pickup. Learn More

Size 9-1/2 industrial rubber boots with a 16" height for maximum coverage. Built for demanding job site conditions, these waterproof boots offer reliable protection against water, mud, and debris. The durable rubber construction and treaded, slip-resistant sole provide safety and comfort for fabricators, construction workers, and maintenance personnel. In stock for Los Angeles pickup. Learn More

26 Gauge Galvanized Corrugated Steel Sheet, 36" wide by 96" long. The G90 zinc coating, applied per ASTM A653, delivers excellent corrosion resistance for outdoor use. Its corrugated profile adds rigidity to the lightweight panel, making it ideal for roofing, siding, fencing, and agricultural barriers where durable weather protection is required. In stock for immediate pickup in Los Angeles. Learn More

The EG654 Eagle Chrome Wireless Keypad provides secure, convenient access control for gates and doors. Featuring 2-channel operation and advanced rolling code technology, it prevents unauthorized access. Simple push-button programming makes setup fast. Fully compatible with Eagle EG650 and EG652 universal receivers, it's ideal for residential, multi-unit, and commercial properties. In stock for immediate pickup in Los Angeles. Learn More

Durable 5/8 Inch Square Plastic Caps designed for a secure, press-fit on square tubing. Made from industrial-grade, weather-resistant plastic, these caps provide a clean, finished appearance while protecting against dirt, moisture, and sharp edges. Ideal for fencing, furniture, and equipment fabrication. Learn More

Durable 2 Inch Post Newell Caps designed for finishing square tubing posts. Fabricated from high-grade Class 25-30 cast iron, these caps provide a protective, decorative finish for fences, gates, and railings. Ideal for architectural and ornamental metalwork. Learn More

Engineered for strength and durability, these 5x5 Heavy Duty Weldable Butt Hinges are essential for industrial gates, doors, and custom fabrication. Made from high-quality, weldable low-carbon steel, they provide a secure and permanent pivot point. Ideal for heavy-duty applications requiring robust performance. Learn More

The 2-Way Hand Riveter is an industrial-grade tool for reliable fastening in fabrication and MRO. Constructed from high-strength steel alloy, it provides the leverage needed for setting aluminum and steel rivets. Includes multiple nose pieces for versatility. Learn More

Model 217B is an industrial-grade caster designed for heavy-duty material handling applications. Featuring a robust steel frame and a high load rating of up to 2000 lbs, it provides durable and reliable mobility for carts, racks, and equipment in MRO and fabrication settings. Learn More

Our 5-inch barrel hinges are constructed from high-strength, weldable steel for maximum durability. Engineered for heavy-duty gates and doors, these hinges provide a smooth, reliable pivot point for industrial fabrication and MRO projects. The plateless design allows for direct welding to steel surfaces. Learn More

Our 5-inch barrel hinges are engineered from high-strength carbon steel for maximum durability and load capacity. Designed for weld-on applications, these hinges provide a robust pivot point for heavy gates, doors, and industrial equipment. They feature a grease zerk fitting for easy maintenance and extended service life. Learn More

Durable 14" brown leather welding gloves engineered for high-heat protection. These industrial-grade gloves meet ANSI/ISEA 105 standards for cut and abrasion resistance, making them ideal for professional welding and fabrication. Learn More

These superior performance work gloves feature a durable nitrile coating for enhanced grip and protection. Rated to ANSI/ISEA 105 standards, they are designed for demanding industrial applications, providing both dexterity and durability for material handling and assembly. Learn More

Our 9-inch barrel hinges are engineered from high-strength, weldable steel for superior durability. Designed for heavy-duty industrial gates, doors, and security applications, these hinges provide smooth, reliable operation. The plateless design allows for direct, clean welding to frames and posts. Learn More

Our 3x3 Heavy Duty Weldable Butt Hinges are engineered from high-strength, low-carbon steel for maximum durability. Designed for high-load applications, these hinges meet industrial fabrication standards (ANSI/BHMA A156.1 Grade 1) for reliable performance on heavy gates, doors, and equipment. Learn More

Our 6x6 Heavy Duty Weldable Butt Hinges are engineered for maximum strength in demanding applications. Forged from high-quality, low-carbon weldable steel, these hinges provide a robust pivot point for heavy gates and industrial doors. The plain steel finish is ready for welding and custom coating. Learn More

The Super Tool Press Pliers 10" are engineered from high-strength forged alloy steel for superior gripping power and durability. Designed to meet ASME B107 standards, these industrial-grade pliers are essential for demanding fabrication and MRO tasks. Learn More

These 10" off-white gloves are crafted from soft, durable goat leather for excellent dexterity and tactile sensitivity. They are ANSI/ISEA 105 rated, making them ideal for general handling, assembly, and MRO tasks requiring reliable hand protection. Learn More

The C46 is an industrial-grade caster engineered for demanding material handling and fabrication applications. It features a robust steel frame and is available with certified load ratings from 200 to 2000 lbs, providing a durable mobility solution for heavy equipment. Learn More

Industrial Caster 251 is a heavy-duty mobility solution designed for demanding environments. Featuring an industrial-grade build with certified load ratings from 200-2000 lbs, it provides reliable movement for equipment, carts, and workbenches. Learn More

Our 3x3/4 Barrel Hinges are heavy-duty, weld-on hardware engineered for high-load applications. Constructed from durable, unfinished weldable steel, they provide a robust pivot point for heavy gates, doors, and custom fabrication projects. These industrial-grade hinges ensure smooth, reliable operation and are ready for welding and finishing. Learn More

The Flower Welding Tab 1 x 3 is a versatile fabrication component made from high-quality, weldable mild steel. These tabs provide secure mounting and connection points, ideal for various industrial and ornamental welding projects. They are designed for reliability and ease of use in professional fabrication settings. Learn More

Protect your hands with our industrial-grade Goat Leather Driving Gloves. These gloves are rated to ANSI/ISEA 105 standards, providing excellent dexterity and durability for material handling. The premium goat leather construction ensures a comfortable fit and reliable protection for MRO and fabrication tasks. Learn More

Industrial-grade Acetone is a powerful, fast-evaporating solvent designed for cleaning and degreasing metal surfaces. It effectively removes oils, grease, and contaminants, ensuring optimal surface preparation for painting or welding. Conforms to industrial purity standards like ASTM D329. Learn More

Our 7-inch barrel hinges are engineered from heavy-duty, weldable carbon steel for maximum durability and strength. Designed for high-load applications, these hinges provide a smooth, reliable pivot for industrial gates and security doors. The robust construction ensures long-lasting performance in demanding MRO and fabrication environments. Learn More

Industrial-grade Razor Wire Clips sold in convenient 25-packs. Made from heavy-duty galvanized steel for superior corrosion resistance and high tensile strength. Essential hardware for securing concertina and razor wire in high-security fence installations. Learn More

The 14 x ¾” Hex Washer Self-Drill Screw is a high-performance fastener for metal-to-metal applications. Compliant with SAE J78 standards, it features a zinc plating (ASTM B633) for corrosion resistance and an integrated neoprene washer for a weatherproof seal. Learn More

Our industrial-grade Black Nitrile Disposable Gloves offer superior puncture and chemical resistance. These powder-free gloves are ANSI/ISEA 105 rated for reliable hand protection in demanding MRO, fabrication, and general-purpose applications. Packaged in a convenient 100-piece box. Learn More

Our 5" (5/8) J-Bolt Adjustable Barrel Hinges are engineered from heavy-duty, weldable low carbon steel for superior strength and durability. Designed for high-load applications, these hinges provide smooth, reliable operation for heavy gates and doors. The adjustable J-bolt allows for precise alignment during installation. Learn More

These 7" J-Bolt Adjustable Barrel Hinges are engineered from high-strength steel for maximum durability in heavy-duty applications. Designed for weld-on installation, they provide a smooth, reliable pivot for industrial gates and doors. The adjustable J-bolt allows for precise alignment and tensioning. Learn More

Engineered for durability, these 4x4 Heavy Duty Weldable Butt Hinges are fabricated from high-grade, weldable carbon steel. Their robust construction provides a reliable pivot point for heavy gates, doors, and industrial enclosures. Supplied unfinished for easy welding and custom finishing. Learn More