Search results for: 'bear on bar wheel grade hing'

This industrial-grade Galvanized Corner Guard is manufactured from 16 gauge steel for high-impact wall and corner protection. It features a G90 hot-dip galvanized coating compliant with ASTM A653 for excellent corrosion resistance in commercial and MRO applications. Learn More

This 5/16" x 2" one-way screw is a tamper-resistant fastener made from industrial-grade low carbon steel with a protective black finish. Designed for security applications based on ASTM A307 material standards where removal prevention is critical. Learn More

This industrial-grade construction adhesive is engineered for high-strength bonding in demanding applications. Compliant with ASTM C557 standards, it provides a reliable bond for a wide range of materials used in MRO and fabrication projects. Ideal for securing metal, wood, and composite surfaces. Learn More

The L-Clip Welding Tab is a critical fabrication component made from high-quality, weldable mild steel. Measuring 1-1/2" x 3-1/2", this tab is engineered for creating strong, precise fixturing points and conforms to general industry standards for material quality and weldability. Learn More

The 14 x 2” Hex Washer Self-Drill Screw is a high-performance fastener engineered to SAE J78 standards. It features a hardened steel point for drilling into metal without a pilot hole and a bonded neoprene washer for a weather-tight seal. The zinc plating, compliant with ASTM B633, provides excellent corrosion resistance for exterior applications. Learn More

Durable 5/8 Inch Square Plastic Caps designed for a secure, press-fit on square tubing. Made from industrial-grade, weather-resistant plastic, these caps provide a clean, finished appearance while protecting against dirt, moisture, and sharp edges. Ideal for fencing, furniture, and equipment fabrication. Learn More

This 6" x 6" heavy-duty square steel base plate is manufactured from high-strength, low-carbon structural steel, meeting key ASTM properties. Pre-drilled holes ensure secure anchoring for structural posts, columns, and industrial equipment. Learn More

Durable 16-gauge galvanized steel slotted angle with 1-1/4" legs for superior corrosion resistance. The pre-punched pattern allows for easy, bolt-together assembly in framing, shelving, and MRO applications. Ideal for creating custom racks and supports. Learn More

This industrial-grade 0.9mm (.035") MIG wire is AWS/ASME certified for consistent and reliable welds. Ideal for a wide range of steel fabrication and repair applications, it ensures strong performance and smooth feeding. Available in 33 LBS spools for production environments. Learn More

This 14 x 1-1/4" Hex Washer Self-Drill Screw is a self-drilling fastener designed for rapid metal-to-metal connections. Compliant with SAE J78 standards, it features a zinc-plated finish (ASTM B633) for corrosion resistance and an integrated neoprene washer for a weatherproof seal. Learn More

The 14 x ¾” Hex Washer Self-Drill Screw is a high-performance fastener for metal-to-metal applications. Compliant with SAE J78 standards, it features a zinc plating (ASTM B633) for corrosion resistance and an integrated neoprene washer for a weatherproof seal. Learn More

A 1/2" x 4" Hex Lag Screw featuring a protective zinc plating per ASTM B633. Manufactured from low carbon steel compliant with ASTM A307 standards for reliable performance in light-duty framing and construction. Learn More

This ½” x 4” Power Bull Anchor is a heavy-duty mechanical wedge anchor for fastening into concrete. Manufactured from high-strength carbon steel with a zinc plating compliant with ASTM B633 for corrosion resistance. Includes nut and washer for a complete installation. Learn More

This 14 x ¾" Hex Washer Self-Drilling Screw is designed for efficient metal-to-metal fastening. It complies with SAE J78 standards and features a zinc-plated finish per ASTM B633 for corrosion resistance. The integrated neoprene washer ensures a secure, weather-tight seal. Learn More

The Super Tool Press Pliers 10" are engineered from high-strength forged alloy steel for superior gripping power and durability. Designed to meet ASME B107 standards, these industrial-grade pliers are essential for demanding fabrication and MRO tasks. Learn More

This industrial-grade 0.8mm (.030") MIG welding wire is AWS/ASME certified for professional use. The steel alloy composition ensures a stable arc, low spatter, and consistent wire feed for high-quality welds in fabrication and repair applications. Packaged in a convenient 2.2 LBS (1 KG) spool. Learn More

This industrial-grade 0.8mm (.030") flux core welding wire is engineered for high-performance fabrication and repair. Meeting AWS/ASME certification standards, it provides a stable arc and excellent bead appearance for general-purpose steel welding. Packaged in a convenient 11 lbs (1kg) spool. Learn More

Protect your hands with our industrial-grade Goat Leather Driving Gloves. These gloves are rated to ANSI/ISEA 105 standards, providing excellent dexterity and durability for material handling. The premium goat leather construction ensures a comfortable fit and reliable protection for MRO and fabrication tasks. Learn More

This industrial-grade construction adhesive is engineered for high-strength bonding on a variety of substrates. Compliant with ASTM C557 standards, it provides a durable, reliable bond for MRO, fabrication, and construction projects. Ideal for securing panels, framing, and other materials where a permanent hold is critical. Learn More

This 5" x 5" Heavy Duty Square Steel Base Plate is engineered from high-strength carbon steel for maximum durability. It comes pre-drilled for secure anchoring in structural and fabrication applications. Designed for compatibility with common industrial fastening systems like ASTM A307. Learn More

The 1 Sq Pressed Steel Cap is a durable, weldable finishing component for 1-inch square tubing. Made from low-carbon mild steel, it provides a clean, protective end for fence posts, railings, and metal furniture. Designed for easy integration in fabrication projects. Learn More

Our Galvanized Slotted Angle is a versatile steel framing component for general construction and MRO projects. Made from 16 gauge galvanized steel for superior corrosion resistance, this 1-1/2" x 1-1/2" angle provides reliable support for shelving, bracing, and custom frameworks that meet industrial manufacturing standards. Learn More

This 2" Square Pressed Steel Cap provides a clean, protective finish for square tubing and fence posts. Fabricated from durable, weldable mild steel, it prevents water ingress and adds a professional aesthetic to any ornamental ironwork project. Learn More

This 5/16” x 2” Hex Lag Screw is a heavy-duty fastener for wood applications. Made from low carbon steel and zinc-plated for corrosion resistance, it meets ASTM A307 specifications for strength and reliability. The hex head allows for high-torque installation. Learn More

Our 2 Inch Square Plastic Cap is an industrial-grade finishing component made from durable, low-density polyethylene (LDPE). It provides a secure, press-fit closure for square tubing, protecting against moisture and debris while offering a clean, professional appearance. Learn More

This 8" x 8" heavy-duty square steel base plate provides a robust foundation for structural and industrial applications. Made from high-strength carbon steel, it features pre-drilled holes for compatibility with heavy-duty fasteners meeting SAE J429 and ASTM standards. Learn More

Durable 1-1/4" x 1-1/4" x 16GA Galvanized Slotted Angle for versatile framing and support applications. Made from commercial-grade, corrosion-resistant galvanized steel conforming to ASTM A653 standards, it is ideal for constructing custom shelving, racks, and braces. Pre-punched slots allow for easy bolt-together assembly. Learn More

This 5/8" x 5" Heavy-Duty Wedge Anchor is engineered for reliable fastening in solid concrete. Manufactured from high-strength carbon steel and finished with a CR3+ zinc plating for enhanced corrosion resistance, it provides superior holding power for structural and MRO applications. Includes nut and washer for immediate installation. Learn More

Galvanized Slotted Angle is a versatile steel framing component ideal for constructing custom racks, shelves, and supports. Its galvanized finish provides excellent corrosion resistance, while the 16-gauge thickness ensures reliable performance for light to medium-duty MRO and fabrication projects. Learn More

3/4" x 16GA Hot Rolled Steel Square Tube, 240" length. Conforms to ASTM A500 Grade B with 58,000 PSI tensile strength and excellent weldability. Ideal for lightweight structural applications like frames, supports, and general fabrication. Its small profile is suited for gate frames, equipment guards, and bracing. In stock for Los Angeles pickup. Learn More

This industrial-grade 0.9mm (.035) MIG welding wire is engineered for high-performance fabrication and repair. Certified to meet AWS/ASME standards, it provides a stable arc and minimal spatter for clean, strong welds on various steel types. Available in an 11 LBS (1KG) spool. Learn More

This 1-1/4" square pressed steel cap provides a clean, finished look for fence posts and railings. Made from durable, weldable mild steel, it protects post interiors from debris and weather. Ideal for ornamental and security fencing applications. Learn More

This Small Slide Bolt features a durable 1/2" diameter steel shaft for reliable latching. Manufactured from industrial-grade low-carbon steel similar to ASTM A307 material, it provides a simple and effective security solution for light-duty doors and gates. Its robust construction ensures long-lasting performance in MRO and fabrication applications. Learn More

16 gauge Cold Rolled Steel Sheet (48" x 120"), typically 1018 grade. Features 63,800 PSI tensile strength, excellent formability, and a smooth, clean surface that is ideal for painting and finishing. This thin gauge sheet is perfect for automotive panels, appliance casings, custom brackets, and enclosures. In stock for same-day Los Angeles pickup. Learn More

4" NPS Schedule 40 Galvanized Steel Pipe, sold in 21-foot lengths. Conforming to ASTM A53 Grade B, this pipe has a 60,000 PSI tensile strength and a hot-dip zinc coating for superior corrosion resistance. Its large diameter is ideal for main water lines, industrial process piping, and structural columns. In stock for same-day Los Angeles pickup. Learn More

2" Nominal Pipe Size (NPS) Galvanized Steel Pipe, Schedule 40 wall, 21-foot length. Conforms to ASTM A53 Grade B with 60,000 PSI tensile strength. The hot-dip zinc coating provides excellent corrosion resistance for outdoor and high-moisture use. Ideal for plumbing mains, HVAC piping, handrails, and structural posts. In stock for same-day Los Angeles pickup. Learn More

Size 9 industrial-grade rubber rain boots featuring a 16-inch height for superior protection in wet and muddy conditions. Built with a 100% waterproof, seamless construction and a slip-resistant lug outsole for secure traction on demanding job sites. Ideal for construction, landscaping, and general maintenance work. In stock for Los Angeles pickup. Learn More

2" OD x 0.065" wall Hot Rolled Steel Round Tube, 240" length. Produced to ASTM A500 Grade B specifications, this structural tube features a minimum yield strength of 46,000 PSI and excellent weldability. The versatile medium diameter is ideal for fabricating handrails, equipment frames, roll cages, and structural supports. In stock for immediate Los Angeles pickup. Learn More

A 1" x 1" x 1/16" 6063 Aluminum Angle, sold in 144" lengths. This architectural-grade aluminum meets ASTM B308 standards and offers 27,000 PSI tensile strength. Known for its excellent corrosion resistance, weldability, and smooth surface finish, it is ideal for light structural applications, fabrication, and trim work. In stock Los Angeles. Learn More

6" Nominal Pipe Size (NPS) Hot Rolled Black Pipe with a Schedule 40 wall (0.280"). Manufactured to meet ASTM A53 Grade B standards, this pipe provides a minimum tensile strength of 60,000 PSI and excellent weldability. Its large diameter is ideal for industrial process piping, structural columns, and main water lines. In stock for Los Angeles pickup. Learn More

1-1/4 inch Nominal Pipe Size (NPS), Schedule 40 Hot Rolled Black Pipe in a 21 ft length. Manufactured to ASTM A53 Grade B standards, this carbon steel pipe offers 60,000 PSI tensile strength and excellent weldability. The medium diameter is ideal for plumbing mains, fire sprinkler systems, and structural applications. In stock for Los Angeles pickup. Learn More

1" x 1" x 1/4" 304 Stainless Steel Angle, available in 240" lengths. This austenitic grade conforms to ASTM A276, offering 73,200 PSI tensile strength, excellent weldability, and superior corrosion resistance. As a small profile, it is ideal for light framing, equipment guards, and architectural trim. In stock for immediate Los Angeles pickup. Learn More

3/4" NPS 6063-T5 Aluminum Pipe with a Schedule 40 wall, in 240" lengths. Conforms to ASTM B241 with 27,000 PSI tensile strength. Known as architectural aluminum, this grade offers a superior surface finish, excellent corrosion resistance, and great weldability. Ideal for handrails, display frames, and low-pressure fluid transfer. In stock Los Angeles. Learn More

1" x 1" Galvanized Steel Square Tube with a 16 gauge wall, sold in a 24-foot length. Conforming to ASTM A500 Grade B, this structural tubing provides a minimum yield strength of 46,000 PSI. The hot-dip galvanized zinc coating delivers excellent corrosion and rust resistance, making it ideal for outdoor frames, trailers, and gates. In stock for Los Angeles pickup. Learn More

2 inch Schedule 40 Hot Rolled Black Pipe. Conforms to ASTM A53 Grade B standards, offering 60,000 PSI tensile strength and excellent weldability for strong, reliable joints. This medium-sized pipe is ideal for plumbing mains, HVAC piping, fire sprinkler systems, and structural applications like handrails and support posts. In stock and ready for same-day pickup in Los Angeles. Learn More

1/2" NPS Schedule 40 Galvanized Steel Pipe in 21-foot lengths. Conforms to ASTM A53 Grade B with a 60,000 PSI tensile strength. The hot-dip zinc coating provides superior corrosion resistance for outdoor and high-moisture environments. This small diameter is ideal for plumbing, non-potable water lines, conduit, and residential handrails. In stock for same-day Los Angeles pickup. Learn More

1 Inch Schedule 40 Hot Rolled Black Pipe, sold in 21-foot lengths. Manufactured to ASTM A53 Grade B standards, it offers 60,000 PSI tensile strength and excellent weldability. This medium-sized pipe is ideal for natural gas lines, fire sprinkler systems, scaffolding, and general structural fabrication. An economical choice for fluid conveyance and support applications. In stock for Los Angeles pickup. Learn More

1-inch diameter Cold Rolled All Thread Rod in a 120-inch length with a zinc plated finish. This rod meets ASTM A307 Grade A strength requirements, with a base material tensile strength of 63,800 PSI. The zinc plating provides good corrosion resistance for general-purpose fastening, anchoring systems, and suspending HVAC fixtures. In stock for immediate Los Angeles pickup. Learn More

6-inch Nominal Pipe Size (NPS) Schedule 40 Galvanized Pipe, 252-inch length. Conforms to ASTM A53 Grade B, delivering 60,000 PSI tensile strength and excellent weldability. The hot-dip zinc coating provides superior corrosion resistance for outdoor and high-moisture environments. Large diameter is ideal for main water lines, industrial process piping, and heavy structural columns. In stock Los Angeles. Learn More

3/4" OD x 0.083" wall Hot Rolled Steel Round Tube, sold in 240" (20 ft) lengths. Conforms to ASTM A500 Grade B with 58,000 PSI tensile strength and excellent weldability. This small-diameter structural tubing is ideal for lightweight frames, furniture, roll cages, and industrial supports where strength and formability are required. In stock for immediate cutting and pickup in Los Angeles. Learn More

3/4" x 3/4" x 1/8" 6063 Aluminum Angle, 144" length. Known as "architectural aluminum," this grade conforms to ASTM B308 and offers excellent corrosion resistance and a superior surface finish. With 27,000 PSI tensile strength, it's ideal for non-structural applications like window frames, door frames, and decorative trim. In stock for Los Angeles pickup. Learn More

1-1/2" NPS Schedule 40 Galvanized Steel Pipe, sold in 21-foot (252") lengths. Conforming to ASTM A53 Grade B, this pipe provides a minimum 60,000 PSI tensile strength and superior corrosion resistance from its zinc coating. Its versatile size is ideal for plumbing mains, structural handrails, fence posts, and other outdoor applications requiring durability. In stock Los Angeles. Learn More

1/2 inch Nominal Pipe Size (NPS) Hot Rolled Black Pipe with a Schedule 40 wall. This product conforms to ASTM A53 Grade B specifications, providing 60,000 PSI tensile strength and excellent weldability. The small diameter is ideal for plumbing, natural gas lines, compressed air systems, and light structural applications like handrails. Standard uncoated 'black' finish. In stock for Los Angeles pickup. Learn More

12 Gauge (48" x 120") Cold Rolled Steel Sheet, typically 1018 grade. Conforms to ASTM A1008 specifications and provides a tensile strength of 63,800 PSI. The cold reduction process creates a smooth, clean surface finish and tight dimensional tolerances, making it ideal for forming and welding. Excellent for automotive panels, appliance casings, and equipment enclosures. In stock for Los Angeles pickup. Learn More

20 Gauge Cold Rolled Steel Sheet, 4' x 10' size. Grade 1018, conforming to ASTM A1008. Features a smooth, clean surface finish and tight dimensional tolerances. With 63,800 PSI tensile strength, it offers excellent formability for bending and moderate drawing. This thin gauge is ideal for automotive panels, appliance casings, and electronic enclosures. In stock for immediate pickup in Los Angeles. Learn More

3" NPS Schedule 40 Galvanized Steel Pipe, sold in 21 ft lengths. Conforms to ASTM A53 Grade B with a 60,000 PSI tensile strength. The hot-dip zinc coating provides excellent corrosion resistance for outdoor and high-moisture environments. This large diameter pipe is ideal for main water lines, industrial process piping, structural columns, and protective barriers. In stock for same-day Los Angeles pickup. Learn More

3-1/2 inch NPS Schedule 40 Galvanized Steel Pipe. Conforming to ASTM A53 Grade B, this pipe features a hot-dip zinc coating for superior corrosion resistance and 60,000 PSI tensile strength. Its durable, weather-resistant finish makes it ideal for outdoor structures, water lines, and safety barriers. Large diameter suitable for main water lines and structural columns. In stock for Los Angeles pickup. Learn More

1 Inch Schedule 40 Galvanized Steel Pipe, sold in 21-foot lengths. Conforms to ASTM A53 Grade B, providing 60,000 PSI tensile strength and superior corrosion resistance from its hot-dip zinc coating. This medium-diameter pipe is ideal for plumbing mains, structural posts, outdoor handrails, and fence framework. A reliable choice for applications requiring strength and weather protection. In stock for same-day Los Angeles pickup. Learn More

3/4 inch Nominal Pipe Size (NPS) Schedule 40 Galvanized Steel Pipe, 21 ft length. Manufactured to ASTM A53 Grade B specifications, this pipe offers a minimum tensile strength of 60,000 PSI and superior corrosion resistance from its hot-dip zinc coating. Ideal for outdoor structures, non-potable water plumbing, handrails, and fencing. In stock and available for same-day pickup in Los Angeles. Learn More

1-1/2 inch Nominal Pipe Size (NPS) Hot Rolled Black Pipe with a Schedule 40 wall thickness. Made from carbon steel conforming to ASTM A53 Grade B specifications, this pipe offers a minimum tensile strength of 60,000 PSI and excellent weldability. Its medium size is well-suited for plumbing mains, structural posts, handrails, and fire protection systems. In stock for immediate Los Angeles pickup. Learn More

3/4" OD x 0.065" wall Hot Rolled Steel Round Tube, sold in 20 ft lengths. This structural tubing conforms to ASTM A500 Grade B, offering 58,000 PSI tensile strength and excellent weldability. Its small diameter is well-suited for light structural applications, equipment frames, furniture, and reinforcement where strength and economy are key. In stock and available for same-day pickup in Los Angeles. Learn More

3/4" NPS Schedule 40 Hot Rolled Black Pipe, available in 21 ft lengths. Conforms to ASTM A53 Grade B, with a minimum tensile strength of 60,000 PSI. This pipe offers excellent weldability and is a versatile, economical choice for fluid/gas transfer and structural uses like handrails. The 'black' finish is a result of the hot rolling process. In stock for immediate Los Angeles pickup. Learn More

1-1/2" x 1-1/2" Hot Rolled Steel Square Tube with a 0.072" wall thickness, in 240" lengths. Made to ASTM A500 Grade B specifications, it offers a minimum yield strength of 46,000 PSI and excellent weldability. This medium-sized structural tubing is ideal for building trailer frames, equipment bases, support structures, and general fabrication projects. In stock for immediate Los Angeles pickup. Learn More

3/4" OD x 0.065" wall 304 Stainless Steel Round Tube with a 180 grit polished finish. Conforms to ASTM A269 and offers 73,200 PSI tensile strength. This grade combines excellent corrosion resistance and weldability, making it ideal for architectural and decorative applications like handrails, guardrails, and trim. The polished surface provides a clean, aesthetic appearance. In stock for immediate Los Angeles pickup. Learn More

3/4" x 3/4" Hot Rolled Steel Square Tube with a 0.072" wall thickness, sold in 20-foot lengths. This A500 Grade B tube meets ASTM A500 specifications and offers a minimum yield strength of 46,000 PSI. Its excellent weldability and high strength-to-weight ratio make it ideal for structural frames, supports, gates, and general fabrication projects. In stock for Los Angeles pickup. Learn More

1-1/4" x 1-1/4" Stainless Steel Square Tube with a 0.120" wall and 180 grit satin finish. This 304 grade tube conforms to ASTM A269 and features 73,200 PSI tensile strength, excellent weldability, and corrosion resistance. Its medium size is ideal for structural frames, architectural handrails, and support columns. In stock for same-day cutting and pickup in Los Angeles. Learn More

1-1/4" x 1-1/4" x 3/16" 304 Stainless Steel Angle, sold in 240-inch lengths. Conforming to ASTM A276, this versatile austenitic grade offers excellent corrosion resistance and weldability with a tensile strength of 73,200 PSI. Its small profile is ideal for creating light structural frames, mounting brackets, corner guards, and architectural trim. In stock for Los Angeles pickup. Learn More

1/2" x 0.065" wall 304 Stainless Steel Square Tube, sold in 20-foot (240") lengths. Conforms to ASTM A269 with a 73,200 PSI tensile strength. This grade offers an excellent balance of corrosion resistance and weldability. The 180 grit satin finish provides a clean, decorative appearance ideal for architectural railings, frames, and trim. In stock for immediate Los Angeles pickup. Learn More

1-1/4" NPS, Schedule 10 Hot Rolled Black Pipe manufactured to ASTM A53 Grade B specifications. This carbon steel pipe offers 60,000 PSI tensile strength and excellent weldability. The medium diameter is ideal for plumbing mains, HVAC piping, handrails, and other structural applications. The uncoated black finish is suitable for indoor use or applications requiring a custom coating. In stock for Los Angeles pickup. Learn More

1-1/4" x 1-1/4" x 1/8" 6063-T5 Aluminum Angle, available in 144" lengths. Conforming to ASTM B308, this architectural grade offers excellent corrosion resistance, a smooth surface finish, and superior formability. With a tensile strength of 27,000 PSI, it's ideal for window frames, railings, and decorative trim where aesthetics are critical. In stock for same-day pickup in Los Angeles. Learn More

5/8" OD x 0.065" wall Hot Rolled Steel Round Tube. Conforms to ASTM A500 Grade B with 58,000 PSI tensile strength and excellent weldability. This small-diameter tubing is a cost-effective choice for general fabrication, furniture frames, machinery guards, and light structural supports. Its strength and formability make it ideal for projects where a precise surface finish is not critical. In stock for Los Angeles pickup. Learn More

5/8" x 5/8" Hot Rolled Steel Square Tube with a 0.065" wall thickness, supplied in 20-foot lengths. Conforming to ASTM A500 Grade B, this structural tubing offers a minimum yield strength of 46,000 PSI and excellent weldability. Its small profile is ideal for lightweight frames, supports, brackets, and general fabrication projects where strength and economy are key. In stock for same-day Los Angeles pickup. Learn More

3/4" x 3/4" x 1/8" 304 Stainless Steel Angle. An austenitic grade conforming to ASTM A276, this angle provides excellent corrosion resistance and weldability with 73,200 PSI tensile strength. Its small profile is ideal for creating lightweight structural frames, mounting brackets, corner guards, and decorative architectural trim where both strength and a clean finish are required. In stock for immediate Los Angeles pickup. Learn More

5 inch Nominal Pipe Size (NPS) Galvanized Steel Pipe with a Schedule 40 wall thickness (0.258"), available in 21 ft lengths. Conforms to ASTM A53 Grade B with 60,000 PSI tensile strength. The hot-dip zinc coating provides superior corrosion resistance for outdoor and high-moisture use. This large diameter pipe is ideal for structural columns, main water lines, and industrial process piping. In stock for Los Angeles pickup. Learn More

1-1/2" OD 304 Stainless Steel Round Tube with a 0.120" wall, 240" length. Compliant with ASTM A269, this tubing combines 73,200 PSI tensile strength with excellent weldability and corrosion resistance. Its medium diameter is ideal for structural and decorative uses like handrails, equipment frames, and architectural supports. Easy to clean and finish, it's a versatile choice for fabrication projects. In stock for Los Angeles pickup. Learn More

26 Gauge Galvanized Corrugated Steel Sheet, 36" wide by 96" long. The G90 zinc coating, applied per ASTM A653, delivers excellent corrosion resistance for outdoor use. Its corrugated profile adds rigidity to the lightweight panel, making it ideal for roofing, siding, fencing, and agricultural barriers where durable weather protection is required. In stock for immediate pickup in Los Angeles. Learn More

This 1-1/2" x 1-1/2" x 1/8" angle is manufactured from Type 304 stainless steel, conforming to ASTM A276 specifications. It offers a tensile strength of 73,200 PSI, excellent corrosion resistance, and superior weldability. Its medium size is ideal for structural framing, equipment bases, brackets, and architectural trim where both strength and a clean finish are required. In stock for same-day Los Angeles pickup. Learn More

2" OD 304 Stainless Steel Round Tube with a 0.065" wall thickness, in 240" lengths. This versatile tube meets ASTM A269 standards and offers 73,200 PSI tensile strength, combining excellent corrosion resistance with superior weldability. Its 180 grit polished finish makes it ideal for architectural applications like handrails, decorative frameworks, and restaurant equipment. In stock for Los Angeles pickup. Learn More

1/2" diameter Cold Rolled All Thread Rod, supplied in 120-inch lengths with a zinc plated finish for corrosion resistance. Conforming to the strength requirements of ASTM A307, this rod offers a tensile strength of 63,800 PSI. Its continuous threading provides maximum versatility for custom-length fasteners, anchoring systems, and structural bracing. In stock for same-day Los Angeles pickup. Learn More

1-1/2 inch OD Type 304 Stainless Steel Round Tube with a 0.120 inch wall and a 180 grit polished finish. Conforms to ASTM A269, offering 73,200 PSI tensile strength, excellent weldability, and strong corrosion resistance. This medium-sized tube is ideal for architectural handrails, food service equipment, and marine hardware. In stock for Los Angeles pickup. Learn More

1/4 inch diameter Cold Rolled All Thread Rod with a zinc plated finish for corrosion resistance. Continuous threading along its 120-inch length provides versatile fastening. Made from low-carbon steel conforming to ASTM A307 strength requirements, it offers 63,800 PSI tensile strength. Ideal for light-duty bracing, suspending conduit, and creating custom-length fasteners. In stock for same-day Los Angeles pickup. Learn More

This 11-inch Face Clamp is a versatile tool for woodworking, welding, and general fabrication. Its large jaw capacity and 2-inch reach provide strong, flush clamping for pocket-hole joinery, butt joints, and assembly tasks. The durable steel construction ensures rigidity and long service life for professional and DIY projects. In stock for same-day pickup in Los Angeles. Learn More

These one-size-fits-all thick cotton gloves offer comfortable, general-purpose hand protection. Made from a durable cotton blend, they are essential Personal Protective Equipment (PPE) for MRO and material handling, adhering to general industrial safety principles like ANSI/ISEA 105. Learn More

This 1/2 Inch Square Plastic Cap is made from durable, weather-resistant Low-Density Polyethylene (LDPE). It provides a secure, friction-fit for finishing square tubing, protecting against sharp edges and internal contamination in fabrication and MRO applications. Learn More

This 1 1/4" x 1 3/4" small welding tab is manufactured from high-quality, weldable low-carbon steel. Featuring a 1/8" thickness and a 3/8" hole, it provides a reliable connection point for industrial fabrication and repair projects compatible with AWS certified consumables. Learn More

Our industrial Fire Door Lock is engineered for critical safety applications in commercial and institutional buildings. This lock is certified to UL 10C standards for fire resistance and constructed from high-strength steel for maximum durability and security. It is designed for reliable performance on fire-rated door assemblies. Learn More

This large industrial slide bolt features a robust 3/4" diameter steel shaft and durable black finish. Engineered for reliable security on heavy-duty gates, doors, and enclosures. Ideal for fabrication and MRO applications. Learn More

Versatile 1-1/4" x 1-1/4" x 16GA slotted angle for custom framing and support. This 120" angle is manufactured from commercial steel and features a galvanized coating (per ASTM A653) for excellent corrosion resistance, making it ideal for MRO and fabrication. Learn More

Protect high-traffic areas with our Galvanized Corner Guard. Made from durable 16 gauge steel with a G90 galvanized coating for superior corrosion resistance, conforming to ASTM A653 standards. Ideal for industrial, commercial, and MRO applications requiring robust wall and corner protection. Learn More

This 1/4" x 2-1/2" Hex Lag Screw is manufactured from low carbon steel, conforming to ASTM A307 strength standards. The zinc-plated finish (ASTM B633) provides essential corrosion resistance, making it ideal for wood construction and framing applications. Learn More

This Safety Yellow industrial coating features advanced Direct-to-Metal (DTM) oil-based alkyd technology for superior adhesion and corrosion protection. It provides a durable, high-visibility finish ideal for MRO and equipment applications, meeting industrial performance benchmarks. Learn More

Our 260 Construction Adhesive is a high-strength formulation engineered for demanding industrial applications. Compliant with ASTM C557, this adhesive provides a durable, reliable bond for a wide range of construction and fabrication materials. Learn More

Size 9-1/2 industrial rubber boots with a 16" height for maximum coverage. Built for demanding job site conditions, these waterproof boots offer reliable protection against water, mud, and debris. The durable rubber construction and treaded, slip-resistant sole provide safety and comfort for fabricators, construction workers, and maintenance personnel. In stock for Los Angeles pickup. Learn More

The 4 Sq Pressed Steel Cap provides a durable, clean finish for square tubing and fence posts. Fabricated from high-quality pressed steel for excellent weldability and longevity. Ideal for ornamental ironwork and security fencing projects. Learn More

The Hook Lock Double Cylinder provides robust security for commercial and industrial gates. Featuring a hardened steel hook bolt and dual-keyed access, this lock is engineered for high-traffic applications and enhanced access control, designed to meet key industry standards for durability and security. Learn More

This 6 Inches Tube Ring is a versatile ornamental component engineered for fabricating handrails, fences, and gates. Constructed from durable, weldable steel, it provides a secure and decorative connection point. Ideal for both new construction and MRO projects requiring reliable hardware. Learn More

Galvanized Slotted Angle (1-1/2" x 1-1/2" x 16GA) is a versatile framing material made from durable, corrosion-resistant galvanized steel meeting ASTM A653 standards. It is perfect for constructing custom shelving, racks, and supports for industrial MRO and fabrication projects. The pre-punched slotted pattern allows for simple, bolt-together assembly. Learn More

This Galvanized Slotted Angle measures 2-1/4" x 1-1/2" x 16GA in a 144" length. Manufactured from steel meeting ASTM A653 standards with a G90 galvanized coating, it offers superior corrosion resistance for custom framing, shelving, and MRO support structures. Learn More

This 5/16" x 4" Hex Lag Screw is manufactured from durable low carbon steel to meet ASTM A307 performance standards. It features a corrosion-resistant zinc plating (per ASTM B633), making it ideal for construction and general framing applications. Learn More

The 1-1/4 Inch Square Plastic Cap provides a clean, finished look for square tubing applications. Made from durable, weather-resistant black plastic, it protects against sharp edges and internal debris. This cap offers a secure press-fit for reliability in fencing, furniture, and equipment fabrication. Learn More