Search results for: 'bar 16 x 0.08 x 0.125'

1" Outer Diameter x 0.083" Wall Hot Rolled Steel Round Tube in 240" lengths. Conforming to ASTM A500 Grade B, this structural tubing provides a minimum yield strength of 46,000 PSI and excellent weldability for fabrication. Its medium size is well-suited for equipment frames, handrails, roll cages, and general structural supports. In stock for immediate Los Angeles pickup. Learn More

1" OD x 0.120" wall Hot Rolled Steel Round Tube, available in 20 ft (240") lengths. Conforming to ASTM A500 Grade B, this structural tubing offers 58,000 PSI tensile strength and excellent weldability. Its medium size is ideal for equipment frames, handrails, roll cages, and general fabrication projects. In stock for same-day Los Angeles pickup. Learn More

2" OD x 0.065" wall Hot Rolled Steel Round Tube, 240" length. Produced to ASTM A500 Grade B specifications, this structural tube features a minimum yield strength of 46,000 PSI and excellent weldability. The versatile medium diameter is ideal for fabricating handrails, equipment frames, roll cages, and structural supports. In stock for immediate Los Angeles pickup. Learn More

Hot Rolled Steel Round Tube measuring 2" outside diameter with a 0.120" wall, supplied in 240" lengths. This tube conforms to ASTM A500 Grade B, providing a minimum tensile strength of 58,000 PSI. Its combination of high strength and excellent weldability makes it ideal for structural applications. In stock Los Angeles. Learn More

5/8" OD x 0.065" wall Hot Rolled Steel Round Tube. Conforms to ASTM A500 Grade B with 58,000 PSI tensile strength and excellent weldability. This small-diameter tubing is a cost-effective choice for general fabrication, furniture frames, machinery guards, and light structural supports. Its strength and formability make it ideal for projects where a precise surface finish is not critical. In stock for Los Angeles pickup. Learn More

3/4" OD x 0.065" wall Hot Rolled Steel Round Tube, sold in 20 ft lengths. This structural tubing conforms to ASTM A500 Grade B, offering 58,000 PSI tensile strength and excellent weldability. Its small diameter is well-suited for light structural applications, equipment frames, furniture, and reinforcement where strength and economy are key. In stock and available for same-day pickup in Los Angeles. Learn More

3/4" OD x 0.075" wall Hot Rolled Steel Round Tube, sold in 20 ft lengths. Produced to ASTM A500 Grade B specifications, this tube offers a minimum yield strength of 46,000 PSI and excellent weldability. Its small diameter is well-suited for light structural applications, equipment frames, furniture, and custom fabrication projects where strength and economy are key. In stock for immediate Los Angeles pickup. Learn More

3/4" OD x 0.083" wall Hot Rolled Steel Round Tube, sold in 240" (20 ft) lengths. Conforms to ASTM A500 Grade B with 58,000 PSI tensile strength and excellent weldability. This small-diameter structural tubing is ideal for lightweight frames, furniture, roll cages, and industrial supports where strength and formability are required. In stock for immediate cutting and pickup in Los Angeles. Learn More

Product 217 is an industrial-grade construction adhesive engineered to meet ASTM C557 standards. This high-strength adhesive provides a durable, permanent bond for a wide range of fabrication, MRO, and construction applications on various materials. Learn More

Our 260 Construction Adhesive is a high-strength formulation engineered for demanding industrial applications. Compliant with ASTM C557, this adhesive provides a durable, reliable bond for a wide range of construction and fabrication materials. Learn More

1" x 1" 304 Stainless Steel Square Tube with a 0.065" wall and 180 grit satin finish. This tube conforms to ASTM A269, delivering 73,200 PSI tensile strength, excellent corrosion resistance, and superior weldability. Its structural efficiency and aesthetic finish make it ideal for architectural handrails, support frames, food service equipment, and decorative applications. In stock for immediate Los Angeles pickup. Learn More

2" x 2" x 0.065" wall 304 Stainless Steel Square Tube, 240" length. With a 180 grit satin finish, this tube conforms to ASTM A269 and provides 73,200 PSI tensile strength. It combines excellent corrosion resistance and weldability, ideal for architectural applications like handrails, guardrails, and decorative trim where a clean, polished appearance is required. In stock for immediate Los Angeles pickup. Learn More

2" x 2" x 0.120" wall 304 Stainless Steel Square Tube, supplied in 20-foot (240") lengths with a 180-grit satin finish. This tube conforms to ASTM A269 and provides 73,200 PSI tensile strength, excellent corrosion resistance, and superior weldability. Its medium size is ideal for architectural handrails, structural framing, support columns, and equipment enclosures. In stock Los Angeles for immediate pickup or delivery. Learn More

1-1/4" OD x 0.065" Wall Hot Rolled Steel Round Tube, sold in 240" (20 ft) lengths. Conforms to ASTM A500 Grade B, providing 58,000 PSI tensile strength, 46,000 PSI yield strength, and excellent weldability. This medium-sized tubing is ideal for structural applications, including handrails, equipment frames, and roll cages where strength and reliability are critical. In stock for immediate pickup in Los Angeles. Learn More

1-1/2 inch OD x 0.065 inch wall Hot Rolled Steel Round Tube, 240 inches long. Produced to ASTM A500 Grade B specifications, this tubing provides a minimum yield strength of 46,000 PSI and excellent weldability for structural applications. The medium diameter is ideal for machinery frames, handrails, and general fabrication. In stock for immediate cutting and Los Angeles pickup. Learn More

1-1/2" OD x 0.083" wall A500B Hot Rolled Steel Round Tube. Conforming to ASTM A500, this structural grade tubing offers a minimum 58,000 PSI tensile strength and excellent weldability. Its medium diameter is ideal for fabricating equipment frames, handrails, roll cages, and general structural supports. Available in 20 ft lengths for same-day pickup in Los Angeles. Learn More

1-1/2" OD x 0.120" wall Hot Rolled Steel Round Tube, 240" length. Produced to meet ASTM A500 Grade B specifications, this structural tubing offers 58,000 PSI tensile strength and excellent weldability. Its medium diameter is ideal for fabrications requiring high strength-to-weight performance, including equipment frames, roll cages, handrails, and structural supports. In stock for Los Angeles pickup. Learn More

3/4" OD x 0.065" wall 304 Stainless Steel Round Tube with a 180 grit polished finish. Conforms to ASTM A269 and offers 73,200 PSI tensile strength. This grade combines excellent corrosion resistance and weldability, making it ideal for architectural and decorative applications like handrails, guardrails, and trim. The polished surface provides a clean, aesthetic appearance. In stock for immediate Los Angeles pickup. Learn More

1/2" x 0.065" wall 304 Stainless Steel Square Tube, sold in 20-foot (240") lengths. Conforms to ASTM A269 with a 73,200 PSI tensile strength. This grade offers an excellent balance of corrosion resistance and weldability. The 180 grit satin finish provides a clean, decorative appearance ideal for architectural railings, frames, and trim. In stock for immediate Los Angeles pickup. Learn More

3/4" x 3/4" 304 Stainless Steel Square Tube with a 0.065" wall and a 180 grit polished finish. This tube conforms to ASTM A269 and provides 73,200 PSI tensile strength. It combines excellent corrosion resistance and weldability, making it ideal for architectural applications like handrails, decorative trim, and lightweight structural frames. In stock for same-day Los Angeles pickup. Learn More

This industrial-grade 0.9mm (.035) MIG welding wire is engineered for high-performance fabrication and repair. Certified to meet AWS/ASME standards, it provides a stable arc and minimal spatter for clean, strong welds on various steel types. Available in an 11 LBS (1KG) spool. Learn More

1-1/4" OD x 0.065" wall 304 Stainless Steel Round Tube with a 180 grit polished finish. This versatile tubing meets ASTM A269 standards and offers a combination of 73,200 PSI tensile strength, excellent weldability, and superior corrosion resistance. Its medium diameter is ideal for architectural applications like handrails, decorative frameworks, and food service equipment. In stock for same-day Los Angeles pickup. Learn More

1-5/8" OD x 0.065" wall Type 304 Stainless Steel Round Tube, 20-foot length, with a 180 grit polished finish. This versatile austenitic stainless steel meets ASTM A269 standards and offers 73,200 PSI tensile strength, excellent corrosion resistance, and superior weldability. Its medium diameter is ideal for architectural handrails, food processing equipment frames, and marine hardware. In stock for immediate Los Angeles pickup. Learn More

1-1/4" x 1-1/4" 304 Stainless Steel Square Tube with a 0.065" wall and a 180-grit satin finish. Conforming to ASTM A269, it offers 73,200 PSI tensile strength, excellent corrosion resistance, and superior weldability. Its combination of structural integrity and polished appearance makes it ideal for architectural handrails, support frames, and decorative applications. In stock for Los Angeles pickup. Learn More

1-1/4" x 1-1/4" Stainless Steel Square Tube with a 0.120" wall and 180 grit satin finish. This 304 grade tube conforms to ASTM A269 and features 73,200 PSI tensile strength, excellent weldability, and corrosion resistance. Its medium size is ideal for structural frames, architectural handrails, and support columns. In stock for same-day cutting and pickup in Los Angeles. Learn More

1-1/2" x 1-1/2" x 0.065" wall 304 Stainless Steel Square Tube, supplied in 20-foot lengths. Conforms to ASTM A269 with a tensile strength of 73,200 PSI. This tube features a 180 grit satin finish, excellent corrosion resistance, and superior weldability. Its medium size is ideal for architectural handrails, equipment frames, support structures, and decorative applications. In stock for immediate Los Angeles pickup. Learn More

1-1/2" x 1-1/2" Type 304 Stainless Steel Square Tube with a 0.120" wall and a 180 grit satin finish. Conforming to ASTM A269, this tube offers 73,200 PSI tensile strength, excellent corrosion resistance, and superior weldability. Its medium size is ideal for architectural handrails, equipment frames, and structural supports. In stock Los Angeles. Learn More

The 1 Sq Pressed Steel Cap is a durable, weldable finishing component for 1-inch square tubing. Made from low-carbon mild steel, it provides a clean, protective end for fence posts, railings, and metal furniture. Designed for easy integration in fabrication projects. Learn More

Durable 5/8 Inch Square Plastic Caps designed for a secure, press-fit on square tubing. Made from industrial-grade, weather-resistant plastic, these caps provide a clean, finished appearance while protecting against dirt, moisture, and sharp edges. Ideal for fencing, furniture, and equipment fabrication. Learn More

Durable 1-1/2 inch square plastic cap designed for a secure fit on square tubing. Made from high-quality, weather-resistant Low-Density Polyethylene (LDPE), this cap provides a clean, finished appearance and protects against debris. Learn More

The 4 Inch Post Ball Cap is a decorative finial designed for fence posts and railings. Crafted from durable Class 25-30 gray iron, it provides a classic architectural finish for ornamental and security fencing projects. This cap is designed to fit standard 4-inch square or round posts. Learn More

Our 12-inch rubber roller is an industrial-grade component designed for high-load capacity material handling. Featuring a durable, non-marring rubber surface bonded to a steel core, it provides smooth movement for conveyor systems and industrial carts. Engineered to meet demanding MRO and fabrication requirements. Learn More

Metalize Industrial Primer is a high-performance alkyd coating engineered for superior corrosion resistance on metal surfaces. Formulated to meet rigorous MIL-SPEC performance criteria, it provides an excellent foundation for DTM (Direct-to-Metal) applications. Ideal for demanding industrial, MRO, and fabrication projects. Learn More

This industrial-grade, oil-based DTM paint delivers a durable black semi-gloss finish. Its alkyd enamel formulation provides excellent corrosion resistance and adhesion directly on prepared metal surfaces, making it ideal for fabrication and MRO projects. Learn More

Our Industrial Grade Oil-Based White Primer is a high-solids, alkyd-based coating designed for superior adhesion and corrosion protection on metal surfaces. This direct-to-metal (DTM) primer provides a durable foundation for topcoats in demanding MRO and fabrication applications. Learn More

The C46 is an industrial-grade caster engineered for demanding material handling and fabrication applications. It features a robust steel frame and is available with certified load ratings from 200 to 2000 lbs, providing a durable mobility solution for heavy equipment. Learn More

This 4" Heavy Duty Solid V-Groove Wheel is engineered for high-load applications on inverted angle iron track. Constructed from solid steel for maximum durability and smooth operation, it's ideal for industrial sliding gates, material handling carts, and production line systems. Supports significant weight with reliable guidance. Learn More

This 6" Cast Iron V-Groove Wheel is engineered for smooth operation on angle iron tracks. Made from industrial-grade Class 25-30 gray iron, it supports a heavy-duty load capacity of 500 lbs. Ideal for sliding gates, industrial doors, and material handling carts. Learn More

The 1-1/2 Double Lock Box is an industrial-grade hardware component for fabricating secure gate and fence locking systems. Made from weldable steel, it provides a durable housing for standard lock mechanisms, making it ideal for ornamental and security applications. Learn More

The 1-1/4 Inch Square Plastic Cap provides a clean, finished look for square tubing applications. Made from durable, weather-resistant black plastic, it protects against sharp edges and internal debris. This cap offers a secure press-fit for reliability in fencing, furniture, and equipment fabrication. Learn More

This 2-1/2 Inch Post Ball Cap is a high-quality ornamental component crafted from durable Class 25-30 gray iron. It provides a classic, protective finish for fence posts, gates, and handrails. Engineered for long-lasting performance in architectural and fabrication projects. Learn More

1/4 inch diameter Cold Rolled All Thread Rod with a zinc plated finish for corrosion resistance. Continuous threading along its 120-inch length provides versatile fastening. Made from low-carbon steel conforming to ASTM A307 strength requirements, it offers 63,800 PSI tensile strength. Ideal for light-duty bracing, suspending conduit, and creating custom-length fasteners. In stock for same-day Los Angeles pickup. Learn More

This 3/8 inch diameter Cold Rolled All Thread Rod is supplied in a 10 foot length with a zinc-plated finish for moderate corrosion resistance. Made from low-carbon steel, it meets the strength requirements of ASTM A307 Grade A, providing a typical tensile strength of 63,800 PSI. Its continuous threading makes it ideal for versatile fastening, anchoring, bracing, and support applications. In stock for Los Angeles pickup. Learn More

1/2" diameter Cold Rolled Steel All Thread Rod with an oil finish, supplied in 120" lengths. Made from low-carbon steel, it meets the strength requirements of ASTM A307 Grade A and offers 63,800 PSI tensile strength. The continuous threading provides versatile fastening for construction, manufacturing, and general repair. In stock for Los Angeles pickup. Learn More

1/2" diameter Cold Rolled All Thread Rod, supplied in 120-inch lengths with a zinc plated finish for corrosion resistance. Conforming to the strength requirements of ASTM A307, this rod offers a tensile strength of 63,800 PSI. Its continuous threading provides maximum versatility for custom-length fasteners, anchoring systems, and structural bracing. In stock for same-day Los Angeles pickup. Learn More

5/8" diameter Cold Rolled All Thread Rod in a 10 ft length, featuring a zinc-plated finish for corrosion resistance. Made from low-carbon steel that meets the strength requirements of ASTM A307 Grade A. Offers good weldability and strength for general-purpose fastening, bracing, and support applications in construction and manufacturing. In stock for immediate Los Angeles pickup. Learn More

3/4" diameter Cold Rolled All Thread Rod in 10-foot lengths with a standard oil finish. Made from low-carbon steel, this rod offers good strength (approx. 63,800 PSI tensile) and conforms to ASTM A307 Grade A strength requirements. The continuous threading provides versatile performance for anchoring, fastening, bracing, and suspending systems in construction and manufacturing. In stock for same-day Los Angeles pickup. Learn More

3/4 inch diameter Cold Rolled All Thread Rod in a 120-inch length with a zinc-plated finish for corrosion resistance. Manufactured from low-carbon steel, its strength conforms to ASTM A307 Grade A with a typical tensile strength of 63,800 PSI. This versatile, continuously threaded rod is ideal for general-purpose fastening, bracing, and anchoring applications in construction and industrial settings. In stock Los Angeles. Learn More

7/8 inch diameter Cold Rolled All Thread Rod, 120" length, with an oil finish for rust prevention. Conforming to the strength requirements of ASTM A307 Grade A, this rod is made from low-carbon steel offering 63,800 PSI tensile strength. Its continuous threading provides versatile fastening for construction, manufacturing, and general repair. In stock for immediate Los Angeles pickup. Learn More

7/8 inch diameter Cold Rolled All Thread Rod in 10-foot lengths. This zinc-plated, low-carbon steel rod meets the strength requirements of ASTM A307 Grade A, with a typical tensile strength of 63,800 PSI. The zinc plating provides moderate corrosion resistance for versatile use. It is ideal for general-purpose fastening, anchoring, and support systems in construction and manufacturing. In stock for immediate Los Angeles pickup. Learn More

1" diameter Cold Rolled All Thread Rod in 120" (10 ft) lengths. Made from 1018 steel with an oil finish for rust prevention, this rod meets ASTM A307 Grade A strength requirements with a 60,000 PSI tensile strength. The continuous threading provides versatile fastening for construction, manufacturing, and general repair. Easily cut to custom lengths. In stock for Los Angeles pickup. Learn More

1-inch diameter Cold Rolled All Thread Rod in a 120-inch length with a zinc plated finish. This rod meets ASTM A307 Grade A strength requirements, with a base material tensile strength of 63,800 PSI. The zinc plating provides good corrosion resistance for general-purpose fastening, anchoring systems, and suspending HVAC fixtures. In stock for immediate Los Angeles pickup. Learn More

5/8 inch 1018 Cold Rolled Hexagon Bar, 144" length. Conforms to ASTM A108 with 63,800 PSI tensile strength. The cold drawing process provides a smooth surface, tight dimensional accuracy, and excellent machinability. This medium-sized bar is ideal for manufacturing nuts, standoffs, hydraulic fittings, and machinery shafts. In stock for Los Angeles pickup. Learn More

1 inch 1018 Cold Rolled Steel Hexagon Bar, 144-inch length. Conforms to ASTM A108 standards, delivering 63,800 PSI tensile strength and excellent machinability. Its smooth finish and tight tolerances make it ideal for fasteners, nuts, hydraulic fittings, and machined components requiring a hex shape for gripping. In stock for same-day Los Angeles pickup. Learn More

1/8" diameter 1018 Cold Rolled Steel Round Bar, 144" length. Conforms to ASTM A108 with a tensile strength of 63,800 PSI. The cold drawn process provides a smooth, scale-free finish and tight dimensional tolerances. This small diameter is ideal for manufacturing precision pins, dowels, fastener blanks, and small shafts. In stock for Los Angeles pickup. Learn More

1/4" diameter 1018 Cold Rolled Round Bar, 144" length. Conforms to ASTM A108 with 63,800 PSI tensile strength and excellent machinability. This cold drawn bar has tight tolerances and a smooth finish, ideal for small shafts, pins, dowels, and fastener blanks. In stock for Los Angeles pickup. Learn More

3/8" diameter 1018 Cold Rolled Round Bar in 144" lengths. This general-purpose steel conforms to ASTM A108, offering 63,800 PSI tensile strength, superior dimensional tolerances, and a smooth finish. Its excellent machinability makes it ideal for producing pins, dowels, fastener blanks, and small shafts requiring precision and good weldability. In stock for Los Angeles pickup. Learn More

1/2" diameter 1018 Cold Rolled Steel Round Bar, 144" length. Conforms to ASTM A108 with 63,800 PSI tensile strength and a smooth, scale-free finish. Known for its excellent machinability and tight dimensional tolerances, this medium-diameter bar is ideal for manufacturing shafts, axles, bushings, and other precision machined components. In stock for Los Angeles pickup. Learn More

5/8" diameter 1018 Cold Rolled Steel Round Bar, 144" length. This bar conforms to ASTM A108 and offers 63,800 PSI tensile strength, superior dimensional tolerance, and a smooth, scale-free surface. Its excellent machinability and good weldability make it a versatile choice for shafts, axles, pins, and custom machined components. In stock for same-day Los Angeles pickup. Learn More

This 3/4" diameter 1018 Cold Rolled Round Bar is a 144-inch low-carbon steel product conforming to ASTM A108. It offers a tensile strength of 63,800 PSI, superior dimensional accuracy, and a smooth, scale-free surface. Known for its excellent machinability and good weldability, it is ideal for producing shafts, axles, and precision machined components. In stock for immediate pickup in Los Angeles. Learn More

7/8 inch diameter 1018 Cold Rolled Round Bar, sold in 144-inch lengths. Conforms to ASTM A108 with 63,800 PSI tensile strength and excellent machinability. The cold drawn process provides a smooth finish and tight dimensional tolerances. This medium-diameter bar is ideal for shafts, axles, pins, and general-purpose machined components. In stock for Los Angeles pickup. Learn More

1" diameter 1018 Cold Rolled Steel Round Bar, 144" length. Conforming to ASTM A108, this bar has a tensile strength of 63,800 PSI and excellent machinability. Its smooth, scale-free surface and tight dimensional tolerances make it ideal for shafts, axles, pins, and custom machined parts requiring precision. In stock Los Angeles. Learn More

1-1/4" diameter 1018 Cold Rolled Round Bar, 144" length. Conforming to ASTM A108, this general-purpose steel has 63,800 PSI tensile strength and excellent machinability. The cold drawn process provides a smooth, scale-free finish and tight dimensional tolerances, making it ideal for shafts, axles, and precision machined components. In stock for Los Angeles pickup. Learn More

1-7/8" diameter 1018 Cold Rolled Round Bar, 144" length. Conforms to ASTM A108 with 53,700 PSI yield strength and excellent machinability. The cold drawn process provides a smooth finish and tight dimensional tolerances. This medium-diameter bar is ideal for manufacturing shafts, axles, pins, and various machined components requiring strength and precision. In stock for Los Angeles pickup. Learn More

1/4" x 1/4" 1018 Cold Rolled Steel Square Bar, 144" length. Conforms to ASTM A108 with 63,800 PSI tensile strength, excellent machinability, and tight dimensional tolerances. The cold drawn finish provides a clean, smooth surface ideal for precision parts. This small square bar is perfect for shafts, dowels, pins, and fixtures. In stock for Los Angeles pickup. Learn More

3/8" x 3/8" 1018 Cold Rolled Steel Square Bar, 144" length. Conforms to ASTM A108 with a tensile strength of 63,800 PSI. The cold drawing process provides tight dimensional tolerances and a clean, smooth surface finish, ideal for machining. This small size is excellent for shafts, dowels, pins, and fixtures. In stock for Los Angeles pickup. Learn More

1/2" x 1/2" 1018 Cold Rolled Square Bar in 144" lengths. Produced to ASTM A108 standards, this low-carbon steel offers a clean surface, tight dimensional tolerances, and excellent machinability. With a tensile strength of 63,800 PSI, it is ideal for medium-duty applications like shafts, fixtures, and precision machined components where a superior finish is required. In stock for Los Angeles pickup. Learn More

5/8" x 5/8" 1018 Cold Rolled Square Bar in 144" lengths. Produced to ASTM A108 standards, this bar offers a tensile strength of 63,800 PSI, excellent machinability, and a superior surface finish. Its tight dimensional tolerances make it ideal for shafts, fixtures, and precision machined components requiring minimal prep work. In stock for same-day Los Angeles pickup. Learn More

3/4 inch 1018 Cold Rolled Steel Square Bar, sold in 144" lengths. This general-purpose low-carbon steel conforms to ASTM A108, offering excellent machinability and a clean, smooth surface finish. The cold drawing process increases strength to 63,800 PSI and provides tight dimensional tolerances, making it ideal for shafts, fixtures, and precision machined parts. In stock Los Angeles. Learn More

1" x 1" 1018 Cold Rolled Steel Square Bar, 144" length. Conforms to ASTM A108 and offers 63,800 PSI tensile strength, a clean surface finish, and tight dimensional tolerances. Its excellent machinability (70% vs 1212) makes it ideal for shafts, dowels, fixtures, and precision machined components. In stock for same-day cutting and Los Angeles pickup. Learn More

The Forney 3/32" (2.4mm) Easy All Steel Stainless Steel Electrode is a premium welding consumable designed for superior performance. This AWS/ASME certified electrode operates within a 35-70A range, ensuring strong, clean welds on various stainless steel applications. Learn More

This 3/32" 6013 all-purpose welding rod is an AWS/ASME certified electrode ideal for general fabrication. Designed for a stable arc on AC/DC, it delivers smooth beads on mild steel. A versatile choice for MRO and light structural work. Learn More

The 1/8" Cobalt Drill Bit is engineered from M35 steel with 5% cobalt for superior heat resistance when drilling hard metals. Featuring a 135° split-point geometry for precision, it is ideal for stainless steel and cast iron applications compliant with ANSI/ASME B94.11M standards. Learn More

The 1/4" Cobalt Drill Bit is engineered from M35 steel with 5% cobalt for exceptional heat resistance up to 1100°F. Its 135° split-point geometry ensures precise, walk-free starts and efficient drilling in hard materials like stainless steel and cast iron. Learn More

AWS A5.1 E6013 certified all-purpose welding rod for mild steel applications. This 3/32" diameter electrode provides a smooth, stable arc and easy slag removal, ideal for general fabrication and MRO. Designed for AC or DC operation in all positions. Learn More

Our 1/2 inch Cobalt Drill Bit is engineered from M35 steel with 5% cobalt for superior heat resistance up to 1100°F. Featuring a 135° split-point geometry compliant with ANSI standards, this bit is designed for high-performance drilling in hard materials like stainless steel and cast iron. Learn More

#3 (3/8") Grade 60 Hot Rolled Rebar, 20-foot length. Meets ASTM A615 specifications and features a minimum yield strength of 60,000 PSI and a deformed surface for superior mechanical bond with concrete. This standard reinforcing bar is essential for adding tensile strength to foundations, slabs-on-grade, and retaining walls. In stock for same-day Los Angeles pickup. Learn More

#4 (1/2") Grade 60 Hot Rolled Rebar, 20-foot length. Conforms to ASTM A615 with a minimum yield strength of 60,000 PSI. The deformed surface provides a superior mechanical bond with concrete, making it essential for reinforcing foundations, slabs, and columns. This medium-diameter bar offers a standard balance of strength and ductility for structural applications. In stock for Los Angeles pickup. Learn More

Grade 60 #5 (5/8" diameter) Hot Rolled Rebar, supplied in a 20-foot length. This steel bar meets ASTM A615 specifications with a minimum yield strength of 60,000 PSI and a tensile strength of 90,000 PSI. Its deformed surface creates a strong mechanical bond with concrete, making it the industry standard for reinforcing foundations, slabs, and retaining walls. In stock for Los Angeles pickup. Learn More

3/4" diameter (#6) Grade 60 Hot Rolled Rebar, available in 20-foot (240") lengths. This reinforcing bar meets ASTM A615 standards and provides a minimum yield strength of 60,000 PSI. Its deformed surface ensures a strong mechanical bond with concrete, making it essential for foundations, slabs, and structural columns. In stock Los Angeles. Learn More

Grade 60 Hot Rolled Rebar, #7 size (7/8" diameter) in 20-foot lengths. Meets ASTM A615 standards with a minimum yield strength of 60,000 PSI and tensile strength of 90,000 PSI. Its deformed surface provides a superior mechanical bond with concrete, making it essential for reinforcing foundations, slabs, and columns. In stock for same-day Los Angeles pickup. Learn More

Grade 60 Hot Rolled Rebar, #8 size (1" diameter) in a 20-foot length. Conforming to ASTM A615, this reinforcing bar provides a minimum yield strength of 60,000 PSI for structural concrete applications. Its deformed surface ensures a strong mechanical bond, making it essential for reinforcing foundations, slabs, columns, and retaining walls. In stock for Los Angeles pickup. Learn More

1/4" diameter A36 Hot Rolled Steel Round bar in a 240" (20 ft) length. This general-purpose structural steel conforms to ASTM A36 and provides a minimum yield strength of 36,000 PSI. Its low carbon content ensures excellent weldability and formability. The small diameter is ideal for creating pins, dowels, concrete anchors, and custom brackets. In stock for Los Angeles pickup. Learn More

3/8" diameter A36 Hot Rolled Steel Round Bar, supplied in a 240" (20 ft) length. This general-purpose bar conforms to ASTM A36 and features a minimum yield strength of 36,000 PSI with excellent formability and weldability. Its small diameter is perfect for creating dowels, pins, light-duty axles, and structural braces. In stock for Los Angeles pickup. Learn More

A36 Hot Rolled Steel Round Bar with a 1/2" diameter and 240" length. This versatile, low-carbon steel conforms to ASTM A36 standards, offering a minimum yield strength of 36,000 PSI and excellent weldability for easy fabrication. Its medium diameter is ideal for shafts, axles, support bracing, and general repairs. Available for same-day pickup in Los Angeles. Learn More

5/8" diameter A36 Hot Rolled Steel Round Bar in a 240" length. Conforming to ASTM A36, this bar provides 58,000-80,000 PSI tensile strength with excellent weldability and formability. Its versatile size is ideal for medium-duty applications including shafts, axles, and structural supports where a precise finish is not required. In stock for immediate Los Angeles pickup. Learn More

3/4" diameter A36 Hot Rolled Steel Round Bar, 240" length. A general-purpose, low-carbon steel bar meeting ASTM A36 specifications. It offers excellent weldability and formability with a minimum yield strength of 36,000 PSI. Its medium diameter makes it ideal for axles, shafts, structural supports, and general fabrication projects. In stock for same-day Los Angeles pickup. Learn More

1-inch diameter A36 Hot Rolled Steel Round Bar in 240-inch (20 ft) lengths. This general-purpose structural steel conforms to ASTM A36 and provides a minimum yield strength of 36,000 PSI. Its excellent weldability and formability make it a top choice for fabrication projects, support braces, shafts, and axles. Available for same-day pickup in Los Angeles. Learn More

1/4" A36 Hot Rolled Steel Square Bar in 240" (20 ft) lengths. Conforms to ASTM A36 with 36,000 PSI minimum yield strength, excellent weldability, and easy fabrication. The scaled mill finish is typical for hot rolling. This small profile is perfect for light structural framing, support brackets, equipment stands, and general repairs. In stock Los Angeles. Learn More

A36 Hot Rolled Steel Square Bar measuring 3/8" x 3/8" in 20-foot lengths. Conforming to ASTM A36, this bar provides a minimum yield strength of 36,000 PSI and excellent weldability for general purpose applications. Its small profile is ideal for light framing, support brackets, railings, and industrial maintenance repairs. In stock for Los Angeles pickup. Learn More

1/2" x 1/2" A36 Hot Rolled Steel Square Bar, 240" length. Conforms to ASTM A36 with 36,000 PSI minimum yield strength and excellent weldability. Its balance of strength and cost-effectiveness makes it a foundational material for fabrication. The medium 1/2" size is ideal for equipment frames, support braces, and structural repairs. In stock for Los Angeles pickup. Learn More

5/8" Hot Rolled Steel Square Bar, available in 20-foot lengths. This A36 grade carbon steel conforms to ASTM A36 and offers 36,000 PSI yield strength with excellent weldability. The hot rolling process gives it a scaly mill finish. Its medium size is ideal for structural frames, equipment supports, trailer components, and general fabrication projects. In stock for Los Angeles pickup. Learn More

3/4" x 3/4" A36 Hot Rolled Steel Square Bar, available in 240" (20 ft) lengths. This general-purpose structural steel conforms to ASTM A36, providing 36,000 PSI minimum yield strength and excellent weldability. Its medium size is ideal for equipment frames, structural bracing, trailer components, and general fabrication. In stock for Los Angeles pickup. Learn More

1" x 1" Hot Rolled Steel Square Bar in 240" lengths. Made from general-purpose A36 steel, it conforms to ASTM A36 specifications and provides a minimum yield strength of 36,000 PSI. Its excellent weldability and formability make it ideal for structural frames, brackets, trailer components, and general fabrication. This medium-sized bar is a versatile choice for construction and industrial maintenance. In stock for Los Angeles pickup. Learn More

The C199XL is an industrial-grade ornamental cap rail fitting designed for durability and a precise fit. Engineered from high-quality metals for architectural applications, it is a key component for constructing robust, ADA-compliant handrail systems. Learn More

The C45 Cap Rail is an industrial-grade ornamental fitting forged from Class 25-30 gray cast iron. It is designed with a 1-¾” width to securely fit over a standard 1-½” rail, providing a durable and decorative finish for handrail and fencing systems. Learn More

Our 4-inch Tube Ring is a high-quality decorative component forged from industrial-grade Class 25-30 gray cast iron. Designed for durability and easy integration, it's ideal for ornamental fencing, gates, and architectural fabrication projects. Learn More

These one-size-fits-all thick cotton gloves offer comfortable, general-purpose hand protection. Made from a durable cotton blend, they are essential Personal Protective Equipment (PPE) for MRO and material handling, adhering to general industrial safety principles like ANSI/ISEA 105. Learn More