Search results for: '6011 aluminum flat ball 1 2 inch x'

6" x 2" Hot Rolled Steel Rectangular Tube with a 0.188" (3/16") wall thickness. This A500 Grade B structural tubing meets ASTM A500 specifications and provides a minimum yield strength of 46,000 PSI. Its high strength-to-weight ratio makes it ideal for building frames, trailer manufacturing, and heavy equipment supports. In stock for same-day Los Angeles pickup. Learn More

1" x 1" x 3/16" A36 Hot Rolled Steel Angle, sold in 240" (20 ft) lengths. This structural angle conforms to ASTM A36 standards, offering a minimum yield strength of 36,000 PSI and excellent weldability. Its small profile is ideal for light-duty framing, support brackets, equipment guards, and general fabrication projects. In stock and available for same-day pickup in Los Angeles. Learn More

Size 9-1/2 industrial rubber boots with a 16" height for maximum coverage. Built for demanding job site conditions, these waterproof boots offer reliable protection against water, mud, and debris. The durable rubber construction and treaded, slip-resistant sole provide safety and comfort for fabricators, construction workers, and maintenance personnel. In stock for Los Angeles pickup. Learn More

2 inch Schedule 40 Hot Rolled Black Pipe. Conforms to ASTM A53 Grade B standards, offering 60,000 PSI tensile strength and excellent weldability for strong, reliable joints. This medium-sized pipe is ideal for plumbing mains, HVAC piping, fire sprinkler systems, and structural applications like handrails and support posts. In stock and ready for same-day pickup in Los Angeles. Learn More

5/8" OD x 0.065" wall Hot Rolled Steel Round Tube. Conforms to ASTM A500 Grade B with 58,000 PSI tensile strength and excellent weldability. This small-diameter tubing is a cost-effective choice for general fabrication, furniture frames, machinery guards, and light structural supports. Its strength and formability make it ideal for projects where a precise surface finish is not critical. In stock for Los Angeles pickup. Learn More

The 14 x 2” Hex Washer Self-Drill Screw is a high-performance fastener engineered to SAE J78 standards. It features a hardened steel point for drilling into metal without a pilot hole and a bonded neoprene washer for a weather-tight seal. The zinc plating, compliant with ASTM B633, provides excellent corrosion resistance for exterior applications. Learn More

1-3/4" x 1-3/4" x 1/4" A36 Hot Rolled Steel Angle, sold in 240" (20 ft) lengths. Conforming to ASTM A36, this angle iron offers a minimum yield strength of 36,000 PSI and excellent weldability. Its versatile L-shape provides robust structural support, making it ideal for equipment framing, support brackets, and general fabrication projects. In stock for same-day Los Angeles pickup. Learn More

1-1/4" x 1-1/4" x 3/16" A36 Hot Rolled Steel Angle, often called angle iron. This structural grade steel conforms to ASTM A36, providing a minimum yield strength of 36,000 PSI and excellent weldability for general fabrication. Its small profile is ideal for light framing, support brackets, trim, and equipment guards. In stock for immediate cutting and same-day Los Angeles pickup. Learn More

Industrial Hardware Consumable 218 is a high-performance solution for MRO and fabrication. Formulated to meet key industrial performance standards like ASTM C557, this product ensures durability for demanding applications on metal surfaces. Ideal for corrosion protection and general maintenance tasks. Learn More

A36 Hot Rolled Steel Angle with 3" and 2" legs and a 3/16" thickness. This structural angle conforms to ASTM A36 specifications, providing a minimum yield strength of 36,000 PSI and excellent weldability. Its medium size is ideal for structural framing, equipment bases, support brackets, and general fabrication projects requiring robust, cost-effective steel components. In stock for same-day pickup in Los Angeles. Learn More

1" x 1" Hot Rolled Steel Square Tube with a 16 gauge (0.065") wall thickness, sold in 240" (20-foot) lengths. Conforming to ASTM A500 Grade B, this tubing provides a minimum 46,000 PSI yield strength, making it ideal for structural applications. Its excellent weldability is suited for trailer frames, supports, equipment bases, and general fabrication projects. In stock for immediate Los Angeles pickup. Learn More

Durable 5/8 Inch Square Plastic Caps designed for a secure, press-fit on square tubing. Made from industrial-grade, weather-resistant plastic, these caps provide a clean, finished appearance while protecting against dirt, moisture, and sharp edges. Ideal for fencing, furniture, and equipment fabrication. Learn More

A36 Hot Rolled Steel Angle, measuring 1-3/4" x 1-3/4" with a 1/8" thickness. This structural angle conforms to ASTM A36 specifications and provides a minimum yield strength of 36,000 PSI. Its excellent weldability and formability make it ideal for manufacturing equipment frames, structural bracing, support brackets, and general fabrication projects. In stock and ready for same-day pickup in Los Angeles. Learn More

1-1/4" x 0.120" wall Hot Rolled Steel Square Tube, 240" length. Conforms to ASTM A500 Grade B, with 46,000 PSI minimum yield strength and excellent weldability. This medium-sized structural tubing offers a high strength-to-weight ratio, making it ideal for trailer frames, equipment bases, roll cages, and general fabrication projects. In stock for immediate pickup in Los Angeles. Learn More

This 1-¼" x 3-¼" L-Clip Welding Tab is a high-quality fabrication component made from durable, weldable mild steel. Designed for structural connections and reinforcement, it conforms to AWS welding practices for strength and reliability. Ideal for creating strong, permanent weld points in MRO and new construction projects. Learn More

Hot Rolled Steel Round Tube measuring 2" outside diameter with a 0.120" wall, supplied in 240" lengths. This tube conforms to ASTM A500 Grade B, providing a minimum tensile strength of 58,000 PSI. Its combination of high strength and excellent weldability makes it ideal for structural applications. In stock Los Angeles. Learn More

Durable 16-gauge galvanized steel slotted angle with 1-1/4" legs for superior corrosion resistance. The pre-punched pattern allows for easy, bolt-together assembly in framing, shelving, and MRO applications. Ideal for creating custom racks and supports. Learn More

1" x 1" 304 Stainless Steel Square Tube with a 0.065" wall and 180 grit satin finish. This tube conforms to ASTM A269, delivering 73,200 PSI tensile strength, excellent corrosion resistance, and superior weldability. Its structural efficiency and aesthetic finish make it ideal for architectural handrails, support frames, food service equipment, and decorative applications. In stock for immediate Los Angeles pickup. Learn More

This 4” x 1/16” x ⅜” cut-off wheel is an industrial-grade abrasive tool for high-speed cutting. Compliant with ANSI B7.1 safety standards, it features fiberglass reinforcement for enhanced durability and stability at its maximum 22,000 RPM rating. Learn More

Galvanized Slotted Angle is a versatile steel framing component ideal for constructing custom racks, shelves, and supports. Its galvanized finish provides excellent corrosion resistance, while the 16-gauge thickness ensures reliable performance for light to medium-duty MRO and fabrication projects. Learn More

The Flower Welding Tab 1 x 3 is a versatile fabrication component made from high-quality, weldable mild steel. These tabs provide secure mounting and connection points, ideal for various industrial and ornamental welding projects. They are designed for reliability and ease of use in professional fabrication settings. Learn More

Industrial Paint 251 is a versatile alkyd-based coating designed for direct-to-metal (DTM) applications. This industrial-grade formula provides excellent corrosion resistance and durability for metal surfaces, meeting key performance criteria. Ideal for both MRO and new fabrication projects. Learn More

A36 Hot Rolled Steel Angle measuring 1-3/4" x 1-3/4" with a 3/16" thickness. This structural angle conforms to ASTM A36 standards and offers a minimum yield strength of 36,000 PSI and excellent weldability. The hot-rolled process results in a scaled finish. Its medium size is ideal for structural framing, equipment bases, bracing, and general fabrication projects requiring robust, easy-to-weld steel. In stock in Los Angeles. Learn More

1-1/4" x 1-1/4" Galvanized Square Tube with a 16 gauge wall, sold in 24-foot lengths. Manufactured to ASTM A500 Grade B standards, this structural tubing has a 58,000 PSI tensile strength. The hot-dip galvanized zinc coating provides excellent corrosion resistance for outdoor applications. Ideal for structural frames, gates, trailer construction, and railings. In stock for Los Angeles pickup. Learn More

1-1/4 inch Nominal Pipe Size (NPS), Schedule 40 Hot Rolled Black Pipe in a 21 ft length. Manufactured to ASTM A53 Grade B standards, this carbon steel pipe offers 60,000 PSI tensile strength and excellent weldability. The medium diameter is ideal for plumbing mains, fire sprinkler systems, and structural applications. In stock for Los Angeles pickup. Learn More

2" OD 304 Stainless Steel Round Tube with a 0.065" wall thickness, in 240" lengths. This versatile tube meets ASTM A269 standards and offers 73,200 PSI tensile strength, combining excellent corrosion resistance with superior weldability. Its 180 grit polished finish makes it ideal for architectural applications like handrails, decorative frameworks, and restaurant equipment. In stock for Los Angeles pickup. Learn More

A 4" x 4" x 1/4" structural angle in 304 Stainless Steel, supplied in 240" lengths. This product meets ASTM A276 specifications, offering 73,200 PSI tensile strength, excellent weldability, and superior corrosion resistance. Its large profile is ideal for heavy-duty structural applications, including building frames, equipment supports, and industrial bracing where strength and environmental durability are critical. In stock for Los Angeles pickup. Learn More

The Morse Metal Devil NXT circular saw blade (7-1/4" dia., 5/8" arbor, 48 teeth) is engineered for fast, smooth cuts in metal. Its carbide-tipped teeth provide exceptional durability when cutting steel, aluminum, and stainless steel. Rated for up to 5800 RPM, this blade delivers burr-free finishes, reducing the need for secondary grinding. Ideal for fabricators and contractors. In stock Los Angeles. Learn More

26 Gauge Galvanized Steel PBR (Purlin Bearing Rib) Sheet, measuring 36 inches wide by 96 inches long. Conforms to ASTM A653, offering excellent corrosion resistance from its protective zinc coating. The base steel provides a minimum 36,000 PSI yield strength for structural integrity. Ideal for residential roofing, commercial siding, and agricultural building applications. In stock and ready for pickup in Los Angeles. Learn More

4" x 4" x 1/4" A36 Hot Rolled Steel Angle, sold in a 20-foot (240") length. This structural angle conforms to ASTM A36 standards, offering a minimum yield strength of 36,000 PSI and excellent weldability. The large profile provides robust support for heavy structural framing, industrial equipment bases, and building construction. A cost-effective and versatile choice for fabrication projects. In stock for same-day Los Angeles pickup. Learn More

3" x 3" x 1/4" 304 Stainless Steel Angle, 240" length. Conforms to ASTM A276, offering 73,200 PSI tensile strength, excellent corrosion resistance, and superior weldability. This medium-sized angle is ideal for structural framing, equipment bases, shelving, and architectural trim. The durable, non-magnetic properties make it suitable for food processing and construction applications. In stock for immediate Los Angeles pickup. Learn More

1-inch diameter A36 Hot Rolled Steel Round Bar in 240-inch (20 ft) lengths. This general-purpose structural steel conforms to ASTM A36 and provides a minimum yield strength of 36,000 PSI. Its excellent weldability and formability make it a top choice for fabrication projects, support braces, shafts, and axles. Available for same-day pickup in Los Angeles. Learn More

This 5” x .040” cut-off wheel is engineered for high-speed cutting of metal. It is an ANSI B7.1 compliant abrasive wheel featuring durable fiberglass reinforcement for safety and performance. Rated for a maximum of 12,200 RPM, it delivers precise, clean cuts in fabrication and MRO applications. Learn More

3" x 1" x 0.083" wall Hot Rolled Steel Rectangular Tube, 240" length. Conforms to ASTM A500 Grade B with a minimum yield strength of 46,000 PSI. This structural grade tubing offers an excellent strength-to-weight ratio and is easily welded and fabricated. Ideal for structural applications like building frames, trailer beds, support columns, and industrial machinery bases. In stock for Los Angeles pickup. Learn More

5" x 3" x 1/4" Hot Rolled Steel Angle, 240" length. This A36 structural angle meets ASTM A36 specifications and provides a minimum yield strength of 36,000 PSI. Its robust dimensions make it ideal for heavy structural applications, including building frames, equipment bases, and industrial supports. A36 steel offers excellent weldability and is a cost-effective choice for general fabrication. In stock for Los Angeles pickup. Learn More

24 Gauge Galvanized Steel B-Deck measuring 36 inches wide by 120 inches long. This structural panel conforms to ASTM A653, providing excellent corrosion resistance from its protective zinc coating. With a high strength-to-weight ratio, it is an economical solution for roofing, siding, and floor decking systems. Ideal for residential, commercial, and agricultural construction. In stock for immediate Los Angeles pickup. Learn More

This 2" OD 304 Stainless Steel Round Tube features a 0.120" wall thickness and a 180 grit polished finish. Conforming to ASTM A269, it offers 73,200 PSI tensile strength, excellent weldability, and superior corrosion resistance. Its medium diameter is ideal for architectural handrails, sanitary food processing equipment, and structural frames requiring both strength and a clean appearance. In stock for immediate Los Angeles pickup. Learn More

A36 Hot Rolled Steel Angle measuring 4" x 3" legs with 1/4" thickness, in a 20-foot length. This structural angle conforms to ASTM A36 standards, offering a minimum yield strength of 36,000 PSI and excellent weldability. Its large size provides substantial rigidity, making it ideal for heavy structural frames, industrial equipment bases, and support bracing in construction projects. In stock for Los Angeles pickup. Learn More

1-1/4" OD x 0.065" Wall Hot Rolled Steel Round Tube, sold in 240" (20 ft) lengths. Conforms to ASTM A500 Grade B, providing 58,000 PSI tensile strength, 46,000 PSI yield strength, and excellent weldability. This medium-sized tubing is ideal for structural applications, including handrails, equipment frames, and roll cages where strength and reliability are critical. In stock for immediate pickup in Los Angeles. Learn More

2" Nominal Pipe Size (NPS) Galvanized Steel Pipe, Schedule 40 wall, 21-foot length. Conforms to ASTM A53 Grade B with 60,000 PSI tensile strength. The hot-dip zinc coating provides excellent corrosion resistance for outdoor and high-moisture use. Ideal for plumbing mains, HVAC piping, handrails, and structural posts. In stock for same-day Los Angeles pickup. Learn More

1" x 1" Galvanized Steel Square Tube with a 16 gauge wall, sold in a 24-foot length. Conforming to ASTM A500 Grade B, this structural tubing provides a minimum yield strength of 46,000 PSI. The hot-dip galvanized zinc coating delivers excellent corrosion and rust resistance, making it ideal for outdoor frames, trailers, and gates. In stock for Los Angeles pickup. Learn More

This 3/4" x 3/4" x 1/8" hot rolled steel angle is a versatile structural shape conforming to ASTM A36 specifications. It offers a minimum yield strength of 36,000 PSI and excellent weldability, making it easy to fabricate. The small profile is ideal for light structural framing, equipment guards, mounting brackets, and custom fabrication projects. In stock for Los Angeles pickup. Learn More

1-inch diameter Cold Rolled All Thread Rod in a 120-inch length with a zinc plated finish. This rod meets ASTM A307 Grade A strength requirements, with a base material tensile strength of 63,800 PSI. The zinc plating provides good corrosion resistance for general-purpose fastening, anchoring systems, and suspending HVAC fixtures. In stock for immediate Los Angeles pickup. Learn More

1 Inch Schedule 40 Galvanized Steel Pipe, sold in 21-foot lengths. Conforms to ASTM A53 Grade B, providing 60,000 PSI tensile strength and superior corrosion resistance from its hot-dip zinc coating. This medium-diameter pipe is ideal for plumbing mains, structural posts, outdoor handrails, and fence framework. A reliable choice for applications requiring strength and weather protection. In stock for same-day Los Angeles pickup. Learn More

3" x 3" x 3/8" Hot Rolled Steel Angle, sold in 240-inch lengths. Conforms to ASTM A36 with a minimum yield strength of 36,000 PSI. This structural angle provides excellent weldability and good machinability. Its medium size is ideal for equipment bases, structural framing, and heavy-duty shelving supports. In stock for Los Angeles pickup. Learn More

This 2" Square Pressed Steel Cap provides a clean, protective finish for square tubing and fence posts. Fabricated from durable, weldable mild steel, it prevents water ingress and adds a professional aesthetic to any ornamental ironwork project. Learn More

3" x 1" Hot Rolled Steel Rectangular Tube with a 0.120" wall thickness (11 gauge), sold in 240" (20 ft) lengths. This structural tubing conforms to ASTM A500 Grade B, providing a minimum yield strength of 46,000 PSI. Its high strength-to-weight ratio and excellent weldability make it ideal for trailer frames, equipment bases, and general fabrication. In stock for same-day Los Angeles pickup. Learn More

1/4" x 1/4" 1018 Cold Rolled Steel Square Bar, 144" length. Conforms to ASTM A108 with 63,800 PSI tensile strength, excellent machinability, and tight dimensional tolerances. The cold drawn finish provides a clean, smooth surface ideal for precision parts. This small square bar is perfect for shafts, dowels, pins, and fixtures. In stock for Los Angeles pickup. Learn More

1-1/4" x 1-1/4" Stainless Steel Square Tube with a 0.120" wall and 180 grit satin finish. This 304 grade tube conforms to ASTM A269 and features 73,200 PSI tensile strength, excellent weldability, and corrosion resistance. Its medium size is ideal for structural frames, architectural handrails, and support columns. In stock for same-day cutting and pickup in Los Angeles. Learn More

1-1/4" x 1-1/4" 304 Stainless Steel Square Tube with a 0.065" wall and a 180-grit satin finish. Conforming to ASTM A269, it offers 73,200 PSI tensile strength, excellent corrosion resistance, and superior weldability. Its combination of structural integrity and polished appearance makes it ideal for architectural handrails, support frames, and decorative applications. In stock for Los Angeles pickup. Learn More

Galvanized PBR sheet, 26 Gauge x 36 inches x 168 inches. Conforms to ASTM A653. Features a protective zinc coating for excellent corrosion resistance. The PBR (Purlin-Bearing Rib) profile provides structural strength for roofing and siding. Lightweight and durable, it's ideal for agricultural, commercial, and residential buildings. In stock Los Angeles. Learn More

1" x 1" A500B Hot Rolled Steel Square Tube with a 0.09" wall thickness, in 240" lengths. This structural tubing conforms to ASTM A500 Grade B and provides 58,000 PSI tensile strength. Its excellent weldability and high strength-to-weight ratio make it ideal for building frames, trailer manufacturing, and general fabrication. In stock for same-day Los Angeles pickup. Learn More

A36 Hot Rolled Steel Angle measuring 6 inches by 4 inches with a 3/8 inch thickness. This structural angle conforms to ASTM A36 standards and offers a minimum yield strength of 36,000 PSI. Its large dimensions make it ideal for heavy structural framing, building supports, and industrial equipment manufacturing. Excellent weldability allows for easy fabrication. In stock and available for same-day pickup in Los Angeles. Learn More

The 1 Sq Pressed Steel Cap is a durable, weldable finishing component for 1-inch square tubing. Made from low-carbon mild steel, it provides a clean, protective end for fence posts, railings, and metal furniture. Designed for easy integration in fabrication projects. Learn More

Durable 16 gauge galvanized steel slotted angle for versatile framing and support applications. Features a G90 galvanized coating for superior corrosion resistance. Ideal for industrial shelving, equipment bracing, and general MRO fabrication projects. Learn More

Our 3-Inch Rubber Roller is an industrial-grade component designed for material handling and fabrication. Features a durable, high-traction rubber surface on a steel core, engineered for consistent performance in MRO and production environments. Learn More

1-1/4" OD x 0.065" wall 304 Stainless Steel Round Tube with a 180 grit polished finish. This versatile tubing meets ASTM A269 standards and offers a combination of 73,200 PSI tensile strength, excellent weldability, and superior corrosion resistance. Its medium diameter is ideal for architectural applications like handrails, decorative frameworks, and food service equipment. In stock for same-day Los Angeles pickup. Learn More

Our 6-inch rubber roller is an industrial-grade component designed for durability and smooth operation. Constructed from high-traction rubber on a robust core, it is ideal for material handling systems and heavy-duty MRO applications. Learn More

1" x 1" Hot Rolled Steel Square Tube with a 0.12" wall thickness, in 20-foot lengths. Manufactured to ASTM A500 Grade B specifications, this structural tubing offers a minimum yield strength of 46,000 PSI and excellent weldability. Its medium size is ideal for constructing durable equipment frames, structural supports, handrails, and general fabrication projects. In stock for same-day Los Angeles pickup. Learn More

Hot Rolled Steel Square Tube measuring 1-1/4" x 1-1/4" with a 0.080" wall thickness, in 20-foot lengths. Manufactured to ASTM A500 Grade B standards, this tubing provides 46,000 PSI minimum yield strength and excellent weldability. Its strength-to-weight ratio makes it ideal for structural frames, equipment bases, and general fabrication projects requiring robust, cost-effective material. In stock for immediate Los Angeles pickup. Learn More

1/4 inch diameter Cold Rolled All Thread Rod with a zinc plated finish for corrosion resistance. Continuous threading along its 120-inch length provides versatile fastening. Made from low-carbon steel conforming to ASTM A307 strength requirements, it offers 63,800 PSI tensile strength. Ideal for light-duty bracing, suspending conduit, and creating custom-length fasteners. In stock for same-day Los Angeles pickup. Learn More

A36 Hot Rolled Steel Angle, 4" x 4" x 3/8" in 20 ft (240") lengths. Conforms to ASTM A36, providing a minimum yield strength of 36,000 PSI with excellent weldability and fabrication characteristics. The large 4-inch legs are ideal for heavy structural applications, building frames, equipment bases, and industrial supports. In stock and available for same-day pickup in Los Angeles. Learn More

This 5-inch tube ring is crafted from high-quality Class 25-30 gray cast iron, providing excellent durability for ornamental and architectural applications. Designed for seamless integration with standard tubing for fences, gates, and handrails. Learn More

The 251V is a high-quality decorative ornamental element crafted from Class 25-30 gray iron. Its durable composition is ideal for architectural detailing, custom fencing, gates, and other fabrication projects requiring classic, robust designs. Learn More

Our 12-inch industrial door spring is engineered from high-tensile spring steel for maximum durability and cycle life. Designed to meet ASTM A227/A228 performance standards, it provides reliable tension for heavy-duty commercial and industrial doors. Features a corrosion-resistant zinc-plated finish for long-lasting use. Learn More

High-performance 40-grit zirconia flap disc for aggressive material removal and finishing. Compliant with ANSI B7.1 safety standards, this 4.5" x 7/8" disc is engineered for grinding steel and other ferrous metals. Its durable zirconia abrasive ensures a long service life in demanding MRO and fabrication applications. Learn More

1-1/4" x 0.065" Hot Rolled Steel Square Tube, 20-foot length. This A500 Grade B structural tubing conforms to ASTM A500 and provides a minimum yield strength of 46,000 PSI. With excellent weldability and a high strength-to-weight ratio, it's ideal for manufacturing trailer frames, equipment bases, roll cages, and general structural supports. In stock for immediate pickup in Los Angeles. Learn More

Bobco's 217B is an industrial-grade, direct-to-metal (DTM) alkyd enamel designed for superior corrosion protection on steel and iron surfaces. This high-performance coating is ideal for demanding MRO and fabrication applications, providing a durable, weather-resistant finish. Learn More

1" Outer Diameter x 0.083" Wall Hot Rolled Steel Round Tube in 240" lengths. Conforming to ASTM A500 Grade B, this structural tubing provides a minimum yield strength of 46,000 PSI and excellent weldability for fabrication. Its medium size is well-suited for equipment frames, handrails, roll cages, and general structural supports. In stock for immediate Los Angeles pickup. Learn More

1-inch diameter 304 Stainless Steel Round Bar, 144" length. Conforms to ASTM A276, providing 73,200 PSI tensile strength with excellent corrosion resistance and weldability. This versatile austenitic grade is ideal for a wide range of applications. Its medium diameter is perfectly suited for shafts, axles, architectural supports, and machined components. In stock for Los Angeles pickup. Learn More

1" OD x 0.075" wall Hot Rolled Steel Round Tube, 240" length. Conforms to ASTM A500 Grade B with 58,000 PSI tensile strength and excellent weldability. This structural tubing is ideal for fabricating roll cages, equipment frames, and support structures where durability and strength are critical. This medium-sized tubing provides a great balance of strength and weight. In stock for Los Angeles pickup. Learn More

1 Inch Schedule 40 Hot Rolled Black Pipe, sold in 21-foot lengths. Manufactured to ASTM A53 Grade B standards, it offers 60,000 PSI tensile strength and excellent weldability. This medium-sized pipe is ideal for natural gas lines, fire sprinkler systems, scaffolding, and general structural fabrication. An economical choice for fluid conveyance and support applications. In stock for Los Angeles pickup. Learn More

This industrial-grade construction adhesive is engineered for high-strength bonding on a variety of substrates. Compliant with ASTM C557 standards, it provides a durable, reliable bond for MRO, fabrication, and construction projects. Ideal for securing panels, framing, and other materials where a permanent hold is critical. Learn More

This 3/4 Inch Square Plastic Cap is designed for a secure fit on square tubing, providing a clean finish and protection. Made from durable, weather-resistant LDPE plastic, it is ideal for finishing fences, railings, and furniture. It meets general industrial quality standards for non-structural applications. Learn More

3" x 1" Hot Rolled Steel Rectangular Tube with a 0.065" wall thickness, available in 20-foot lengths. Manufactured to ASTM A500 Grade B specifications, this structural tubing provides a tensile strength of 58,000 PSI and excellent weldability. Its high strength-to-weight ratio makes it ideal for building frames, trailer construction, support columns, and industrial equipment bases. In stock for immediate pickup in Los Angeles. Learn More

This industrial-grade construction adhesive is engineered for high-strength bonding in demanding applications. Compliant with ASTM C557 standards, it provides a reliable bond for a wide range of materials used in MRO and fabrication projects. Ideal for securing metal, wood, and composite surfaces. Learn More

A professional-grade construction adhesive meeting ASTM C557 standards for strong, reliable bonds. This high-performance adhesive is ideal for bonding a wide range of materials in construction, fabrication, and MRO projects. Formulated for superior adhesion and durability. Learn More

1-1/4" OD x 0.120" wall 304 Stainless Steel Round Tube. Conforms to ASTM A269, featuring 73,200 PSI tensile strength, excellent weldability, and corrosion resistance. Polished to a 180 grit finish for architectural and decorative applications. Medium diameter is ideal for handrails, equipment frames, and structural supports. Available for same-day pickup in Los Angeles. Learn More

The Eagle 1000 FSC is a 1/2 HP continuous duty sliding gate operator for residential and light commercial applications. It handles rolling gates up to 27 feet and 600 lbs with a 12" per second travel speed. Features include 2-wire master/slave, auto-close timer, and a fail-safe manual crank release. In stock for Los Angeles pickup. Learn More

The C45 Cap Rail is an industrial-grade ornamental fitting forged from Class 25-30 gray cast iron. It is designed with a 1-¾” width to securely fit over a standard 1-½” rail, providing a durable and decorative finish for handrail and fencing systems. Learn More

1" OD x 0.065" wall 304 Stainless Steel Round Tube with a 180 grit polished finish. This versatile tubing conforms to ASTM A269, delivering 73,200 PSI tensile strength, excellent weldability, and superior corrosion resistance. Its medium diameter is ideal for architectural handrails, food processing equipment, frames, and decorative applications where a clean, aesthetic finish is required. In stock for immediate Los Angeles pickup. Learn More

This 6-inch V-Groove wheel is engineered for heavy-duty sliding gates, industrial doors, and material handling systems running on inverted angle iron track. Its durable steel construction ensures high load capacity and smooth operation. The 6-inch diameter provides stability for large gates and spans uneven surfaces effectively. Ideal for fabricators and installers requiring reliable gate hardware. In stock for Los Angeles pickup. Learn More

Our 12-inch rubber roller is an industrial-grade component designed for high-load capacity material handling. Featuring a durable, non-marring rubber surface bonded to a steel core, it provides smooth movement for conveyor systems and industrial carts. Engineered to meet demanding MRO and fabrication requirements. Learn More

This 3/16" x 4-1/4" industrial cobalt drill bit is engineered from M35 steel (5% cobalt) for superior heat resistance. Its 135° split-point tip ensures precise, no-walk starts on hard materials like stainless steel and cast iron. Manufactured to meet industrial performance standards for durability and accuracy. Learn More

1" x 0.075" wall A500 Grade B Hot Rolled Steel Square Tube, sold in 20-foot lengths. Conforms to ASTM A500 with a minimum yield strength of 46,000 PSI and excellent weldability. This tube's high strength-to-weight ratio makes it ideal for structural frames, equipment bases, trailer manufacturing, and general fabrication projects where durability is critical. In stock for Los Angeles pickup. Learn More

1" OD x 0.120" wall Hot Rolled Steel Round Tube, available in 20 ft (240") lengths. Conforming to ASTM A500 Grade B, this structural tubing offers 58,000 PSI tensile strength and excellent weldability. Its medium size is ideal for equipment frames, handrails, roll cages, and general fabrication projects. In stock for same-day Los Angeles pickup. Learn More

The Eagle-1 is a complete slide gate operator kit for residential applications. Its powerful 1/2 HP continuous-duty motor handles gates up to 18 feet and 300 lbs. This easy-to-install package includes two wireless remotes and a monitored reflective photo eye for enhanced security and safety. Ideal for automating driveway gates with reliable performance. In stock Los Angeles. Learn More

High-performance 120 Grit Zirconia Flap Disc designed for finishing and blending applications. Compliant with ANSI B7.1 safety standards, this 4-1/2" x 7/8" disc provides a long-lasting, consistent cut on steel and other ferrous metals. Rated for a maximum speed of 13,300 RPM. Learn More

26 Gauge Galvanized Steel PBR (Purlin Bearing Rib) panel, 36 inches wide by 192 inches (16 ft) long. Conforms to ASTM A653, offering excellent corrosion resistance from its protective zinc coating. Ideal for commercial roofing, agricultural siding, and residential projects, providing a durable, low-maintenance exterior. In stock for same-day pickup in Los Angeles. Learn More

Our 4-inch Tube Ring is a high-quality decorative component forged from industrial-grade Class 25-30 gray cast iron. Designed for durability and easy integration, it's ideal for ornamental fencing, gates, and architectural fabrication projects. Learn More

This 9-inch door spring is engineered from high-tensile spring steel for reliable, long-lasting tension in commercial and industrial doors. Designed for high-cycle applications, it ensures consistent performance and durability for MRO and new installations. Learn More

This 60 Grit Zirconia Flap Disc is a high-performance abrasive for rapid stock removal and finishing on steel and other metals. It is engineered with a durable zirconia alumina grain and complies with ANSI B7.1 safety standards. The Type 29 conical shape is ideal for aggressive grinding. Learn More

This 6 Inches Tube Ring is a versatile ornamental component engineered for fabricating handrails, fences, and gates. Constructed from durable, weldable steel, it provides a secure and decorative connection point. Ideal for both new construction and MRO projects requiring reliable hardware. Learn More

The Eagle-1000 FR is a robust 1/2 HP slide gate operator designed for residential and light commercial applications. It handles gates up to 27 feet and 600 lbs with a continuous duty motor. This complete kit includes two remotes, a receiver, and a photo eye safety monitor for a secure and convenient access control solution. In stock for same-day pickup in Los Angeles. Learn More

26 Gauge Galvanized Steel PBR Panel, measuring 36 inches wide by 288 inches (24 feet) long. Produced to ASTM A653 standards, this panel offers excellent corrosion resistance from its protective zinc coating. The PBR (Purlin Bearing Rib) profile provides structural strength, making it ideal for roofing, siding, and agricultural building applications where durability and weather resistance are required. In stock for Los Angeles pickup. Learn More

Industrial Coating 227 is a professional-grade, direct-to-metal (DTM) alkyd paint designed for maximum adhesion and durability. This corrosion-resistant coating meets MIL-SPEC performance criteria and is ideal for protecting steel and iron surfaces in demanding industrial environments. Learn More

The 6-inch V-Groove Wheel Box is an industrial-grade component for heavy-duty track applications. Constructed from durable steel and cast iron, it features high load capacity ratings suitable for large sliding gates and material handling systems. This assembly is designed for reliable, smooth operation on angle iron tracks. Learn More

This 1/4" x 4-1/4" Cobalt Industrial Drill Bit is engineered from M35 steel with 5% cobalt for superior heat resistance. Conforming to ANSI/ASME B94.11M standards, its 135° split-point tip ensures precise starts and is ideal for drilling into stainless steel and cast iron. Learn More

26 Gauge Galvanized Corrugated Steel Sheet, measuring 36 inches in nominal width by 120 inches in length. Conforms to ASTM A653 specifications with a G90 zinc coating for excellent corrosion resistance. This lightweight, durable panel is ideal for roofing, siding, agricultural buildings, and decorative applications. Its corrugated profile adds rigidity. In stock for immediate pickup in Los Angeles. Learn More

This 1-1/4" square pressed steel cap provides a clean, finished look for fence posts and railings. Made from durable, weldable mild steel, it protects post interiors from debris and weather. Ideal for ornamental and security fencing applications. Learn More