Search results for: 'plate cable black render q 1 22 inch metal'

3/4" x 3/4" A500 Grade B Hot Rolled Steel Square Tube with a 0.065" wall, supplied in 20-foot lengths. This structural tubing conforms to ASTM A500 and provides a minimum yield strength of 46,000 PSI with excellent weldability. Its high strength-to-weight ratio makes it ideal for lightweight frames, supports, gates, and general fabrication projects. In stock Los Angeles. Learn More

This 1/2" x 3" heavy-duty wedge anchor is engineered from high-strength carbon steel for reliable fastening in solid concrete. It features a corrosion-resistant Zinc Plated CR3+ finish compliant with ASTM B633 and includes a nut and washer. Ideal for demanding structural and industrial MRO applications. Learn More

This 5/8" x 5" Heavy-Duty Wedge Anchor is engineered for reliable fastening in solid concrete. Manufactured from high-strength carbon steel and finished with a CR3+ zinc plating for enhanced corrosion resistance, it provides superior holding power for structural and MRO applications. Includes nut and washer for immediate installation. Learn More

Galvanized Slotted Angle manufactured from durable 16 gauge steel for reliable performance in light to medium-duty applications. This 1-1/4" x 1-1/4" angle features a hot-dip galvanized finish conforming to ASTM A653 for superior corrosion resistance, ideal for custom framing, shelving, and MRO projects. Learn More

This 3/8 inch diameter Cold Rolled All Thread Rod is supplied in a 10 foot length with a zinc-plated finish for moderate corrosion resistance. Made from low-carbon steel, it meets the strength requirements of ASTM A307 Grade A, providing a typical tensile strength of 63,800 PSI. Its continuous threading makes it ideal for versatile fastening, anchoring, bracing, and support applications. In stock for Los Angeles pickup. Learn More

Our 2 Inch Square Plastic Cap is an industrial-grade finishing component made from durable, low-density polyethylene (LDPE). It provides a secure, press-fit closure for square tubing, protecting against moisture and debris while offering a clean, professional appearance. Learn More

Industrial Coating 251V is a high-performance, direct-to-metal (DTM) alkyd enamel designed for superior corrosion protection. This industrial-grade coating provides a durable, weather-resistant finish for MRO and fabrication applications, formulated to meet MIL-SPEC performance criteria. Learn More

This 6 Inches Tube Ring is a versatile ornamental component engineered for fabricating handrails, fences, and gates. Constructed from durable, weldable steel, it provides a secure and decorative connection point. Ideal for both new construction and MRO projects requiring reliable hardware. Learn More

Our 12-inch rubber roller is an industrial-grade component designed for high-load capacity material handling. Featuring a durable, non-marring rubber surface bonded to a steel core, it provides smooth movement for conveyor systems and industrial carts. Engineered to meet demanding MRO and fabrication requirements. Learn More

7/8 inch diameter Cold Rolled All Thread Rod in 10-foot lengths. This zinc-plated, low-carbon steel rod meets the strength requirements of ASTM A307 Grade A, with a typical tensile strength of 63,800 PSI. The zinc plating provides moderate corrosion resistance for versatile use. It is ideal for general-purpose fastening, anchoring, and support systems in construction and manufacturing. In stock for immediate Los Angeles pickup. Learn More

3/4 inch diameter Cold Rolled All Thread Rod in a 120-inch length with a zinc-plated finish for corrosion resistance. Manufactured from low-carbon steel, its strength conforms to ASTM A307 Grade A with a typical tensile strength of 63,800 PSI. This versatile, continuously threaded rod is ideal for general-purpose fastening, bracing, and anchoring applications in construction and industrial settings. In stock Los Angeles. Learn More

Durable 5/8 Inch Square Plastic Caps designed for a secure, press-fit on square tubing. Made from industrial-grade, weather-resistant plastic, these caps provide a clean, finished appearance while protecting against dirt, moisture, and sharp edges. Ideal for fencing, furniture, and equipment fabrication. Learn More

The 14 x ¾” Hex Washer Self-Drill Screw is a high-performance fastener for metal-to-metal applications. Compliant with SAE J78 standards, it features a zinc plating (ASTM B633) for corrosion resistance and an integrated neoprene washer for a weatherproof seal. Learn More

A durable 3 lb rubber mallet featuring a 3-inch non-marring face and a 14-inch overall length. The solid rubber head delivers firm, controlled blows without damaging metal surfaces, wood, or delicate components. Its balanced hardwood handle provides a comfortable grip for precise work in fabrication, woodworking, and general assembly. In stock Los Angeles. Learn More

1/2" diameter Cold Rolled Steel All Thread Rod with an oil finish, supplied in 120" lengths. Made from low-carbon steel, it meets the strength requirements of ASTM A307 Grade A and offers 63,800 PSI tensile strength. The continuous threading provides versatile fastening for construction, manufacturing, and general repair. In stock for Los Angeles pickup. Learn More

This 3/4 Inch Square Plastic Cap is designed for a secure fit on square tubing, providing a clean finish and protection. Made from durable, weather-resistant LDPE plastic, it is ideal for finishing fences, railings, and furniture. It meets general industrial quality standards for non-structural applications. Learn More

The 1 Sq Pressed Steel Cap is a durable, weldable finishing component for 1-inch square tubing. Made from low-carbon mild steel, it provides a clean, protective end for fence posts, railings, and metal furniture. Designed for easy integration in fabrication projects. Learn More

Bobco's 217B is an industrial-grade, direct-to-metal (DTM) alkyd enamel designed for superior corrosion protection on steel and iron surfaces. This high-performance coating is ideal for demanding MRO and fabrication applications, providing a durable, weather-resistant finish. Learn More

1 Inch x 1-1/4 Inch 6061-T6 Aluminum Flat Bar, 144" length. Conforms to ASTM B211, offering a versatile combination of high strength (45,000 PSI tensile), excellent corrosion resistance, and good machinability. This medium-sized bar is ideal for structural bracing, machine ways, base plates, and custom fabricated parts. In stock for immediate cutting and pickup in Los Angeles. Learn More

This 10" x 1/8" x 1" abrasive cut-off wheel is engineered for high-speed metal cutting applications. Featuring fiberglass reinforcement for durability and safety, it is fully compliant with ANSI B7.1 standards. Designed for tools operating at or below a maximum speed of 6,100 RPM. Learn More

This 2-1/2 Inch Post Ball Cap is a high-quality ornamental component crafted from durable Class 25-30 gray iron. It provides a classic, protective finish for fence posts, gates, and handrails. Engineered for long-lasting performance in architectural and fabrication projects. Learn More

This 14 x ¾" Hex Washer Self-Drilling Screw is designed for efficient metal-to-metal fastening. It complies with SAE J78 standards and features a zinc-plated finish per ASTM B633 for corrosion resistance. The integrated neoprene washer ensures a secure, weather-tight seal. Learn More

1" diameter Cold Rolled All Thread Rod in 120" (10 ft) lengths. Made from 1018 steel with an oil finish for rust prevention, this rod meets ASTM A307 Grade A strength requirements with a 60,000 PSI tensile strength. The continuous threading provides versatile fastening for construction, manufacturing, and general repair. Easily cut to custom lengths. In stock for Los Angeles pickup. Learn More

A36 Hot Rolled Steel Flat Bar, 2-1/2 inches wide by 1/2 inch thick, in a 240-inch length. Conforming to ASTM A36, this bar provides a minimum yield strength of 36,000 PSI and excellent weldability for structural applications. Its medium size is ideal for structural bracing, equipment frames, base plates, and general fabrication projects. In stock for same-day Los Angeles pickup. Learn More

Our 12-inch industrial door spring is engineered from high-tensile spring steel for maximum durability and cycle life. Designed to meet ASTM A227/A228 performance standards, it provides reliable tension for heavy-duty commercial and industrial doors. Features a corrosion-resistant zinc-plated finish for long-lasting use. Learn More

Our Industrial Grade Oil-Based White Primer is a high-solids, alkyd-based coating designed for superior adhesion and corrosion protection on metal surfaces. This direct-to-metal (DTM) primer provides a durable foundation for topcoats in demanding MRO and fabrication applications. Learn More

1/2 Inch x 1 Inch 6061-T6 Aluminum Flat Bar, 144" length. Conforms to ASTM B211, offering a versatile combination of 45,000 PSI tensile strength, good machinability, and excellent corrosion resistance. This heat-treatable grade is ideal for structural framing, base plates, and machined components where strength and light weight are required. In stock for same-day Los Angeles pickup. Learn More

5/8" diameter Cold Rolled All Thread Rod in a 10 ft length, featuring a zinc-plated finish for corrosion resistance. Made from low-carbon steel that meets the strength requirements of ASTM A307 Grade A. Offers good weldability and strength for general-purpose fastening, bracing, and support applications in construction and manufacturing. In stock for immediate Los Angeles pickup. Learn More

This 4-1/2" x .040" x 7/8" cut-off wheel is an industrial-grade abrasive engineered for high-speed cutting. It is ANSI B7.1 compliant and features fiberglass reinforcement for enhanced safety and durability during metal fabrication and MRO tasks. Learn More

This 3-piece Aviation Snip Set includes essential tools for any metal fabricator's toolkit. The set contains a left-cut (red handle), right-cut (green handle), and straight-cut (yellow handle) snip. Featuring hardened steel blades and a compound leverage design, these snips provide maximum cutting power with minimal effort. Ideal for cutting sheet metal in fabrication, HVAC, and roofing projects. In stock Los Angeles. Learn More

Our 3-Inch Rubber Roller is an industrial-grade component designed for material handling and fabrication. Features a durable, high-traction rubber surface on a steel core, engineered for consistent performance in MRO and production environments. Learn More

1-1/4" x 1/2" A36 Hot Rolled Steel Flat Bar, sold in 240-inch (20 ft) lengths. This structural steel conforms to ASTM A36 and provides a minimum yield strength of 36,000 PSI. Its excellent weldability and formability make it a versatile choice for general fabrication. This medium-width bar is ideal for structural bracing, equipment frames, and base plates. In stock for Los Angeles pickup. Learn More

A36 Hot Rolled Steel Flat Bar measuring 4 inches wide by 1/8 inch thick, in a 240-inch length. This structural steel conforms to ASTM A36 and provides a minimum yield strength of 36,000 PSI. Its excellent weldability and formability make it a versatile choice. The large width is ideal for manufacturing base plates, heavy structural supports, and frame components. In stock for Los Angeles pickup. Learn More

A36 Hot Rolled Steel Flat Bar, 6 inches wide by 1 inch thick, sold in 240-inch lengths. This structural steel bar conforms to ASTM A36 standards and offers a minimum yield strength of 36,000 PSI with excellent weldability. Its large cross-section is ideal for manufacturing heavy-duty base plates, structural supports, die components, and equipment frames. In stock for same-day Los Angeles pickup. Learn More

The 14 x 2” Hex Washer Self-Drill Screw is a high-performance fastener engineered to SAE J78 standards. It features a hardened steel point for drilling into metal without a pilot hole and a bonded neoprene washer for a weather-tight seal. The zinc plating, compliant with ASTM B633, provides excellent corrosion resistance for exterior applications. Learn More

This 6061-T6 Aluminum Flat Bar measures 1 inch wide by 3/16 inch thick in a 144-inch length. Conforming to ASTM B211, it combines high strength (45,000 PSI tensile) with excellent machinability and corrosion resistance. The T6 temper indicates it is heat-treated for maximum strength. This versatile size is ideal for structural bracing, machine ways, and custom mounting plates. In stock Los Angeles. Learn More

Our 1/2 inch Cobalt Drill Bit is engineered from M35 steel with 5% cobalt for superior heat resistance up to 1100°F. Featuring a 135° split-point geometry compliant with ANSI standards, this bit is designed for high-performance drilling in hard materials like stainless steel and cast iron. Learn More

3 Inch by 1/4 Inch Hot Rolled Steel Flat Bar, 240-inch length. A versatile and economical structural steel conforming to ASTM A36 standards. This material offers a minimum yield strength of 36,000 PSI and excellent weldability, making it ideal for fabrication. Its medium size is perfect for structural bracing, machine ways, base plates, and general repairs. In stock and ready for same-day pickup in Los Angeles. Learn More

A36 Hot Rolled Steel Flat Bar, measuring 6 inches wide by 1/8 inch thick in a 240-inch length. This versatile structural steel conforms to ASTM A36 standards, offering a minimum yield strength of 36,000 PSI and excellent weldability. Its large width makes it ideal for manufacturing base plates, heavy equipment mounting, structural bracing, and general fabrication projects. In stock for same-day Los Angeles pickup. Learn More

The 1” x 3” Flower Welding Tab is a decorative and functional component for custom metal fabrication. Precision cut from 1/8” thick weldable mild steel, it provides a reliable mounting point for ornamental gates, fences, and furniture. Ideal for projects requiring both strength and aesthetic appeal. Learn More

3-1/2" x 1/8" Hot Rolled Steel Flat Bar, 240-inch length. Conforms to ASTM A36 with 36,000 PSI minimum yield strength and excellent weldability. This large-width structural bar is ideal for manufacturing base plates, heavy equipment components, trailer frames, and general fabrication projects requiring robust support. The hot rolled finish has a distinctive mill scale. In stock for immediate Los Angeles pickup. Learn More

A36 Hot Rolled Steel Flat Bar, 10 inches wide by 1/4 inch thick, in a 240-inch (20-foot) length. This structural steel conforms to ASTM A36 specifications and offers a minimum yield strength of 36,000 PSI with excellent weldability. Its substantial width makes it ideal for heavy-duty applications like base plates, structural supports, and heavy equipment fabrication. In stock for same-day Los Angeles pickup. Learn More

5 inch x 1/4 inch 6061-T6 Aluminum Flat Bar, 144" length. Conforms to ASTM B211, offering a versatile combination of high strength (45,000 PSI tensile), good machinability, and excellent corrosion resistance. This large-width bar is ideal for manufacturing base plates, heavy structural components, die parts, and mounting blocks where stability and strength-to-weight ratio are critical. In stock for Los Angeles pickup. Learn More

Our 6-inch rubber roller is an industrial-grade component designed for durability and smooth operation. Constructed from high-traction rubber on a robust core, it is ideal for material handling systems and heavy-duty MRO applications. Learn More

10 inch by 1/2 inch A36 Hot Rolled Steel Flat Bar, available in 20-foot lengths. This structural steel conforms to ASTM A36 specifications, providing a minimum yield strength of 36,000 PSI and excellent weldability. Its large width makes it an ideal choice for heavy-duty applications such as machinery base plates, structural supports, die components, and trailer frames. In stock for Los Angeles pickup. Learn More

A36 Hot Rolled Steel Flat Bar measuring 5 inches wide by 1/8 inch thick. Conforming to ASTM A36, this structural steel bar offers 36,000 PSI minimum yield strength and excellent weldability. Its large width makes it ideal for manufacturing base plates, heavy structural supports, trailer frames, and die components. This versatile, low-cost material is easily fabricated. In stock for same-day Los Angeles pickup. Learn More

4 inch x 1/4 inch 6061-T6 Aluminum Flat Bar, 144-inch length. Conforming to ASTM B211, this versatile alloy combines 45,000 PSI tensile strength with good machinability and excellent corrosion resistance. The T6 temper provides optimal strength for structural applications. This large width is ideal for base plates, heavy structural components, and die components. In stock for immediate Los Angeles pickup. Learn More

7/8 inch diameter Cold Rolled All Thread Rod, 120" length, with an oil finish for rust prevention. Conforming to the strength requirements of ASTM A307 Grade A, this rod is made from low-carbon steel offering 63,800 PSI tensile strength. Its continuous threading provides versatile fastening for construction, manufacturing, and general repair. In stock for immediate Los Angeles pickup. Learn More

2-1/2 inch by 3/4 inch A36 Hot Rolled Steel Flat Bar, sold in 240-inch (20-foot) lengths. This structural carbon steel conforms to ASTM A36, offering 36,000 PSI minimum yield strength and excellent weldability for general fabrication. Its medium width is ideal for structural bracing, base plates, and industrial equipment components. In stock for same-day Los Angeles pickup. Learn More

304 Stainless Steel Flat Bar with a 3-inch width and 1/8-inch thickness, sold in 144-inch lengths. Conforming to ASTM A276, this bar provides 73,200 PSI tensile strength, excellent corrosion resistance, and superior weldability. Its versatile size is ideal for structural braces, equipment framework, base plates, and general fabrication projects. In stock for immediate pickup in Los Angeles. Learn More

This 12" x 7/64" Cut-Off Wheel is an industrial-grade abrasive tool compliant with ANSI B7.1 safety standards. Engineered with fiberglass reinforcement for a maximum speed of 5,100 RPM, it is designed for fast, clean cuts on various metals. The 1" arbor hole fits standard stationary cut-off machines. Learn More

A36 Hot Rolled Steel Flat Bar, 1-1/2" wide by 3/16" thick, in 240-inch lengths. Conforms to ASTM A36 with 36,000 PSI minimum yield strength. This low-carbon steel offers excellent weldability and good formability. As a medium-width bar, it is ideal for structural bracing, equipment frames, base plates, and general fabrication projects. In stock for immediate Los Angeles pickup. Learn More

The 1/8" Cobalt Drill Bit is engineered from M35 steel with 5% cobalt for superior heat resistance when drilling hard metals. Featuring a 135° split-point geometry for precision, it is ideal for stainless steel and cast iron applications compliant with ANSI/ASME B94.11M standards. Learn More

The C199XL is an industrial-grade ornamental cap rail fitting designed for durability and a precise fit. Engineered from high-quality metals for architectural applications, it is a key component for constructing robust, ADA-compliant handrail systems. Learn More

The Eagle-1000 FR is a robust 1/2 HP slide gate operator designed for residential and light commercial applications. It handles gates up to 27 feet and 600 lbs with a continuous duty motor. This complete kit includes two remotes, a receiver, and a photo eye safety monitor for a secure and convenient access control solution. In stock for same-day pickup in Los Angeles. Learn More

This 5” x 1/4” grinding disc is engineered for high-performance metal removal. Made from durable aluminum oxide with fiberglass reinforcement, it meets ANSI B7.1 safety standards and is rated for a maximum speed of 12,200 RPM. Learn More

1 inch by 1/8 inch A36 Hot Rolled Steel Flat Bar, 240-inch length. Conforming to ASTM A36, this bar offers a minimum yield strength of 36,000 PSI and excellent weldability for structural applications. Its medium size is ideal for support braces, frame components, and general repair work. In stock for immediate cutting and pickup in Los Angeles. Learn More

7" x 1/4" Hot Rolled Steel Flat Bar, 240" length. Conforms to ASTM A36 with a minimum yield strength of 36,000 PSI. This structural steel offers excellent weldability and formability. The large 7-inch width is ideal for heavy structural applications, machinery base plates, trailer frames, and support braces where strength and durability are critical. In stock for Los Angeles pickup. Learn More

1" x 1/4" Hot Rolled Steel Flat Bar, 240" length. Conforms to ASTM A36, a low-carbon structural steel with 58,000 PSI tensile strength and excellent weldability. This versatile bar is easy to form, drill, and machine. Its medium size is ideal for structural bracing, equipment frames, base plates, and general fabrication projects. In stock for immediate Los Angeles pickup. Learn More

1/2" x 8" 6061-T6 Aluminum Flat Bar, 144" length. Conforms to ASTM B211 with 45,000 PSI tensile strength, good machinability, and excellent corrosion resistance. This versatile, heat-treatable grade offers a high strength-to-weight ratio. The large 8-inch width is ideal for structural base plates, heavy equipment mounting, die components, and large machined parts. In stock for same-day Los Angeles pickup. Learn More

6" x 1/2" 1018 Cold Rolled Steel Flat Bar, 144" length. Conforms to ASTM A108 with 63,800 PSI tensile strength and excellent machinability. The cold drawing process provides tight dimensional tolerances and a smooth, scale-free finish. Its substantial 6-inch width makes it ideal for base plates, heavy structural components, and die sets. In stock for Los Angeles pickup. Learn More

6" x 1/4" A36 Hot Rolled Steel Flat Bar, sold in 240" (20 ft) lengths. Conforming to ASTM A36, this structural steel offers a minimum yield strength of 36,000 PSI and excellent weldability. The large 6-inch width is ideal for manufacturing machinery base plates, heavy structural braces, and trailer frame components. In stock for same-day Los Angeles pickup. Learn More

Industrial Coating 227 is a professional-grade, direct-to-metal (DTM) alkyd paint designed for maximum adhesion and durability. This corrosion-resistant coating meets MIL-SPEC performance criteria and is ideal for protecting steel and iron surfaces in demanding industrial environments. Learn More

5" x 1/2" Hot Rolled A36 Steel Flat Bar, supplied in 240-inch (20-foot) lengths. This structural steel bar conforms to ASTM A36 and offers a minimum yield strength of 36,000 PSI with excellent weldability and formability. Its large cross-section is ideal for manufacturing heavy-duty base plates, structural supports, trailer frames, and other general fabrication projects requiring robust strength. In stock for immediate Los Angeles pickup. Learn More

The L-Clip Welding Tab is a critical fabrication component made from high-quality, weldable mild steel. Measuring 1-1/2" x 3-1/2", this tab is engineered for creating strong, precise fixturing points and conforms to general industry standards for material quality and weldability. Learn More

1-1/2 inch wide by 1/4 inch thick Hot Rolled Steel Flat Bar. Manufactured from A36 carbon structural steel, this bar meets ASTM A36 standards and offers a minimum yield strength of 36,000 PSI. Its excellent weldability and good machinability make it ideal for structural bracing, machine ways, supports, and general fabrication projects. In stock and ready for same-day pickup in Los Angeles. Learn More

A36 Hot Rolled Steel Flat Bar measuring 2-1/2 inches wide by 1 inch thick, sold in 20-foot lengths. This structural steel meets ASTM A36 standards and provides a minimum yield strength of 36,000 PSI. Its excellent weldability and good formability make it a top choice for fabrication. This medium-sized bar is ideal for structural bracing, equipment frames, and general repairs. In stock and available for pickup in Los Angeles. Learn More

The Bobco Welding Machine MMA 160 is a portable, high-performance stick welder designed for industrial use. It delivers a stable 160-amp arc, ideal for use with AWS/ASME certified electrodes like 6010, 6013, and 7018. Its durable construction ensures reliability for both fabrication and MRO projects. Learn More

This 9-inch door spring is engineered from high-tensile spring steel for reliable, long-lasting tension in commercial and industrial doors. Designed for high-cycle applications, it ensures consistent performance and durability for MRO and new installations. Learn More

This 11-inch Face Clamp is a versatile tool for woodworking, welding, and general fabrication. Its large jaw capacity and 2-inch reach provide strong, flush clamping for pocket-hole joinery, butt joints, and assembly tasks. The durable steel construction ensures rigidity and long service life for professional and DIY projects. In stock for same-day pickup in Los Angeles. Learn More

1018 Cold Rolled Flat Bar, 1-1/2" wide by 1/4" thick, in a 144" length. Conforming to ASTM A108, this bar offers a tensile strength of 63,800 PSI, excellent machinability, and a smooth, scale-free surface. Its tight dimensional tolerances make it ideal for manufacturing brackets, base plates, and structural components requiring precision. In stock for immediate Los Angeles pickup. Learn More

Model 217B is an industrial-grade caster designed for heavy-duty material handling applications. Featuring a robust steel frame and a high load rating of up to 2000 lbs, it provides durable and reliable mobility for carts, racks, and equipment in MRO and fabrication settings. Learn More

Hot Rolled Steel Flat Bar, 1-1/2" wide by 1/2" thick. This A36 structural steel conforms to ASTM A36 standards and offers excellent weldability and formability. With a minimum yield strength of 36,000 PSI, it's a reliable choice for structural applications. This medium-width bar is ideal for building frames, support bracing, machinery base plates, and industrial repairs. Available for same-day Los Angeles pickup. Learn More

This 2 Inch Post Ball Cap provides a durable, decorative finish for square or round tubing. Fabricated from Class 25-30 gray cast iron, it is designed for welding onto fences, gates, and handrails, offering a classic architectural look. Learn More

1-1/2" x 1/2" 1018 Cold Rolled Steel Flat Bar, sold in 144" lengths. This bar meets ASTM A108 standards, offering 63,800 PSI tensile strength, a smooth surface finish, and tight dimensional tolerances. Its excellent machinability and good weldability make it a versatile choice for fabricating brackets, machine ways, and base plates. In stock and ready for same-day pickup in Los Angeles. Learn More

1-1/2" x 1" 1018 Cold Rolled Steel Flat Bar, 144" length. Conforms to ASTM A108 with 63,800 PSI tensile strength and excellent machinability. The cold drawing process provides a smooth, scale-free surface and tight dimensional tolerances. This medium-width bar is ideal for structural bracing, machine ways, and base plates requiring precision and a clean finish. In stock for Los Angeles pickup. Learn More

3-1/2" x 3/8" A36 Hot Rolled Steel Flat Bar, 20-foot length. A structural grade carbon steel conforming to ASTM A36 with a minimum yield strength of 36,000 PSI and excellent weldability. This large flat bar is ideal for manufacturing base plates, heavy equipment frames, structural supports, and general fabrication projects. In stock for same-day Los Angeles pickup. Learn More

A36 Hot Rolled Steel Flat Bar, 1-1/4" wide by 1/8" thick. This structural steel bar conforms to ASTM A36 standards, offering a minimum yield strength of 36,000 PSI and excellent weldability. Its good overall mechanical properties make it ideal for general fabrication, structural bracing, supports, and repair work. In stock for same-day Los Angeles pickup. Learn More

This 5-inch tube ring is crafted from high-quality Class 25-30 gray cast iron, providing excellent durability for ornamental and architectural applications. Designed for seamless integration with standard tubing for fences, gates, and handrails. Learn More

Industrial Coating 218 is a high-performance alkyd and epoxy formulation designed for direct-to-metal (DTM) applications. This corrosion-resistant coating provides a durable finish for industrial MRO and fabrication projects, meeting key performance benchmarks. Learn More

304 Stainless Steel Flat Bar, 2 inches wide by 1/4 inch thick, in a 144-inch length. This versatile bar conforms to ASTM A276, offering excellent corrosion resistance and 73,200 PSI tensile strength. Its medium size is ideal for structural bracing, equipment framework, and architectural trim. Excellent weldability and ductility make it a top choice for fabrication projects. In stock for Los Angeles pickup. Learn More

This 4-inch V-Groove Wheel Box is an industrial-grade component designed for high-load capacity on sliding gates and doors. Constructed from heavy-duty steel, it ensures smooth, reliable operation on angle iron tracks. Ideal for fabrication and MRO applications. Learn More

4" x 1-1/2" Hot Rolled Steel Rectangular Tube with a 0.065" wall, manufactured to ASTM A500 Grade B specifications. This structural grade tubing offers a minimum 46,000 PSI yield strength and excellent weldability, making it ideal for fabrication. Its high strength-to-weight ratio is perfect for trailer frames, structural supports, and machine bases. In stock for immediate Los Angeles pickup. Learn More

1018 Cold Rolled Steel Flat Bar, 1-1/2" wide by 1/8" thick in 144" lengths. Conforming to ASTM A108, this bar offers a tensile strength of 63,800 PSI, excellent machinability, and a smooth, scale-free surface. Its tight dimensional tolerances make it ideal for fabricating precision parts like mounting brackets, machine ways, and base plates. In stock for same-day Los Angeles pickup. Learn More

4" x 1-1/4" Hot Rolled Steel Flat Bar, available in 20 ft lengths. This A36 structural steel conforms to ASTM A36 standards and offers a minimum yield strength of 36,000 PSI. Its properties include excellent weldability and good formability. As a large-width bar, it is ideal for fabricating heavy structural components, machinery base plates, and industrial supports. In stock for Los Angeles pickup. Learn More

Our 4-inch Tube Ring is a high-quality decorative component forged from industrial-grade Class 25-30 gray cast iron. Designed for durability and easy integration, it's ideal for ornamental fencing, gates, and architectural fabrication projects. Learn More

1-1/4" x 1/2" Cold Rolled 1018 Steel Flat Bar, 144" length. Conforms to ASTM A108 with 63,800 PSI tensile strength. The cold drawing process provides a smooth, scale-free finish and tight dimensional tolerances, making it excellent for machining. This medium-width bar is ideal for structural bracing, machine ways, base plates, and mounting brackets. In stock for Los Angeles pickup. Learn More

1018 Cold Rolled Steel Flat Bar, measuring 1/4" thick by 1-3/4" wide. This bar conforms to ASTM A108 and offers superior dimensional accuracy and a smooth, scale-free surface due to the cold drawing process. With 63,800 PSI tensile strength, its medium size is ideal for manufacturing base plates, mounting brackets, and structural components requiring precision. In stock for immediate Los Angeles pickup. Learn More

1-1/2" x 3/8" 1018 Cold Rolled Flat Bar in 144" lengths. Conforms to ASTM A108, delivering 63,800 PSI tensile strength with excellent machinability. The cold drawn process provides a smooth, scale-free finish and tight dimensional tolerances. This medium width is ideal for structural bracing, machine ways, base plates, and custom fabrication projects. In stock for Los Angeles pickup. Learn More

A 3/4" thick by 1-1/2" wide 6061-T6 Aluminum Flat Bar, supplied in a 144" length. This bar meets ASTM B211 specifications and offers 45,000 PSI tensile strength. Its combination of strength, excellent weldability, and corrosion resistance makes it ideal for structural bracing, machine ways, base plates, and custom fabricated parts. In stock Los Angeles. Learn More

This 2-1/2" x 1/4" Hot Rolled Steel Flat Bar is a general-purpose structural steel conforming to ASTM A36. It features a minimum yield strength of 36,000 PSI, excellent weldability, and good formability. Its medium size is ideal for structural bracing, machine ways, base plates, and equipment frames. The hot-rolled finish has a characteristic scale. In stock for same-day Los Angeles pickup. Learn More

This 6 Inch Solid V-Groove Wheel is engineered for high-capacity applications, supporting loads up to 2000 lbs. Manufactured from solid steel to industrial standards, it provides durable and reliable performance on angle iron tracks for gates and carts. Learn More

This 2-1/2" x 1/2" 1018 Cold Rolled Flat Bar, 144" in length, is produced to ASTM A108 specifications. It offers a smooth, scale-free finish, tight dimensional tolerances, and excellent machinability. With a tensile strength of 63,800 PSI, this medium-width bar is ideal for structural bracing, machine ways, and base plates. In stock for immediate Los Angeles pickup. Learn More

This 3-1/2" x 1/2" Hot Rolled Steel Flat Bar is manufactured from A36 grade steel, conforming to ASTM A36 standards. It offers a minimum yield strength of 36,000 PSI and excellent weldability. As a large-dimension bar, it is ideal for heavy structural applications, base plates for machinery, die components, and robust framing supports. In stock and ready for same-day pickup in Los Angeles. Learn More

1 Inch by 3/16 Inch A36 Hot Rolled Steel Flat Bar, sold in 20-foot lengths. This structural steel conforms to ASTM A36 and provides a minimum yield strength of 36,000 PSI with excellent weldability and formability. Its medium size is ideal for structural bracing, equipment frames, and general fabrication projects requiring reliable strength and durability. In stock for same-day Los Angeles pickup. Learn More

6061-T6 Aluminum Flat Bar measuring 1/2" thick by 1-1/4" wide in 144" lengths. This versatile, heat-treatable grade conforms to ASTM B211 and combines high strength (45,000 PSI tensile) with excellent machinability and corrosion resistance. Its medium width makes it ideal for structural bracing, support brackets, base plates, and custom machined components. In stock for same-day pickup in Los Angeles. Learn More

The 3 Inch Post Ball Cap is a durable, decorative finial for fence posts and railings. Manufactured from high-strength Class 25-30 gray iron, it provides a classic architectural finish and protects the post top from weather. Ideal for both new fabrication and MRO projects. Learn More

This 1" x 1/4" 6061-T6 Aluminum Flat Bar is a versatile, heat-treatable grade with a high strength-to-weight ratio. Conforming to ASTM B211, it offers 45,000 PSI tensile strength, good machinability, and excellent corrosion resistance. This medium-width bar is ideal for structural bracing, support brackets, mounting plates, and general fabrication projects. In stock for Los Angeles pickup. Learn More

This 1-1/2" x 3/16" Cold Rolled Flat Bar is made from 1018 steel, conforming to ASTM A108 standards. It offers 63,800 PSI tensile strength, a smooth, scale-free surface, and tight dimensional tolerances. With good machinability and weldability, it's ideal for manufacturing brackets, base plates, and machine components. Available for same-day pickup in Los Angeles. Learn More

Our L-Clip Welding Tab is an essential component for professional fabrication. Made from high-quality, weldable low-carbon steel, this 1-1/2 x 1-1/2 tab ensures clean weld starts and strong temporary connections, designed for use in processes compliant with AWS/ASME standards. Learn More