Search results for: 'feet metal paint up near me'

This 1/4" x 4-1/4" Cobalt Industrial Drill Bit is engineered from M35 steel with 5% cobalt for superior heat resistance. Conforming to ANSI/ASME B94.11M standards, its 135° split-point tip ensures precise starts and is ideal for drilling into stainless steel and cast iron. Learn More

2" Nominal Pipe Size (NPS) Galvanized Steel Pipe, Schedule 40 wall, 21-foot length. Conforms to ASTM A53 Grade B with 60,000 PSI tensile strength. The hot-dip zinc coating provides excellent corrosion resistance for outdoor and high-moisture use. Ideal for plumbing mains, HVAC piping, handrails, and structural posts. In stock for same-day Los Angeles pickup. Learn More

3/4" x 3/4" x 1/8" 6063 Aluminum Angle, 144" length. Known as "architectural aluminum," this grade conforms to ASTM B308 and offers excellent corrosion resistance and a superior surface finish. With 27,000 PSI tensile strength, it's ideal for non-structural applications like window frames, door frames, and decorative trim. In stock for Los Angeles pickup. Learn More

2-1/2" nominal Schedule 40 Galvanized Steel Pipe, 21-foot length. Conforms to ASTM A53 Grade B, with 60,000 PSI tensile strength for structural integrity. The hot-dip zinc coating provides excellent corrosion and rust resistance. Large diameter is ideal for main water lines, industrial piping, and structural columns. In stock for immediate Los Angeles pickup. Learn More

A36 Hot Rolled Steel Angle measuring 4" x 3" legs with a 3/8" thickness. Conforming to ASTM A36, this angle iron offers a minimum yield strength of 36,000 PSI and excellent weldability for robust joints. Its large size is ideal for heavy structural applications, building frames, industrial supports, and equipment manufacturing. In stock for immediate cutting and pickup in Los Angeles. Learn More

4" x 4" x 1/4" A36 Hot Rolled Steel Angle, sold in a 20-foot (240") length. This structural angle conforms to ASTM A36 standards, offering a minimum yield strength of 36,000 PSI and excellent weldability. The large profile provides robust support for heavy structural framing, industrial equipment bases, and building construction. A cost-effective and versatile choice for fabrication projects. In stock for same-day Los Angeles pickup. Learn More

A36 Hot Rolled Steel Flat Bar, 12" wide by 3/4" thick. Conforms to ASTM A36 with a minimum yield strength of 36,000 PSI. This large-format structural bar has excellent weldability and good formability, making it a versatile choice for heavy-duty fabrication. Ideal for base plates, structural supports, equipment frames, and general repairs. In stock and available for Los Angeles pickup. Learn More

2" x 2" x 1/4" 6063-T5 Aluminum Angle, 144" length. Conforming to ASTM B308, this architectural alloy has a 27,000 PSI tensile strength. Known for its superior surface finish and excellent corrosion resistance, it is ideal for anodizing. This medium-sized profile is perfect for structural framing, equipment bases, and architectural trim. In stock for Los Angeles pickup. Learn More

A36 Hot Rolled Steel Angle measuring 2" x 2" x 1/8" in 20-foot (240") lengths. This structural angle conforms to ASTM A36, providing a minimum yield strength of 36,000 PSI and excellent weldability. Its medium size is ideal for general structural framing, equipment bases, bracing, and heavy-duty shelving supports. In stock Los Angeles. Learn More

3-1/2" x 3-1/2" x 1/4" A36 Hot Rolled Steel Angle, 240" length. Conforms to ASTM A36 with a minimum yield strength of 36,000 PSI and excellent weldability. This large structural angle is ideal for heavy-duty applications like building frames, industrial supports, and equipment bases where strength and rigidity are critical. In stock for immediate Los Angeles pickup. Learn More

3" x 3" x 3/8" Hot Rolled Steel Angle, sold in 240-inch lengths. Conforms to ASTM A36 with a minimum yield strength of 36,000 PSI. This structural angle provides excellent weldability and good machinability. Its medium size is ideal for equipment bases, structural framing, and heavy-duty shelving supports. In stock for Los Angeles pickup. Learn More

This 1-¼" x 3-¼" L-Clip Welding Tab is a high-quality fabrication component made from durable, weldable mild steel. Designed for structural connections and reinforcement, it conforms to AWS welding practices for strength and reliability. Ideal for creating strong, permanent weld points in MRO and new construction projects. Learn More

A36 Hot Rolled Steel Flat Bar, 1-1/4" wide by 1/8" thick. This structural steel bar conforms to ASTM A36 standards, offering a minimum yield strength of 36,000 PSI and excellent weldability. Its good overall mechanical properties make it ideal for general fabrication, structural bracing, supports, and repair work. In stock for same-day Los Angeles pickup. Learn More

Our Galvanized Slotted Angle is a versatile steel framing component for general construction and MRO projects. Made from 16 gauge galvanized steel for superior corrosion resistance, this 1-1/2" x 1-1/2" angle provides reliable support for shelving, bracing, and custom frameworks that meet industrial manufacturing standards. Learn More

This Galvanized Slotted Angle measures 2-1/4" x 1-1/2" x 16GA in a 144" length. Manufactured from steel meeting ASTM A653 standards with a G90 galvanized coating, it offers superior corrosion resistance for custom framing, shelving, and MRO support structures. Learn More

3" x 1/8" A36 Hot Rolled Steel Flat Bar in 20-foot lengths. This structural grade steel conforms to ASTM A36, offering 36,000 PSI minimum yield strength and excellent weldability for general fabrication. Its medium width is ideal for structural bracing, machine ways, wear strips, and base plates. In stock for same-day cutting and pickup in Los Angeles. Learn More

3" x 3" A500 Grade B Hot Rolled Steel Square Tube with a 0.06" wall thickness, supplied in a 240" length. This structural tubing conforms to ASTM A500 and offers a minimum yield strength of 46,000 PSI. Its excellent weldability and high strength-to-weight ratio make it ideal for fabricating trailer frames, equipment supports, roll cages, and general structural applications. In stock for immediate pickup in Los Angeles. Learn More

1" OD x 0.065" wall Hot Rolled Steel Round Tube, available in 240-inch lengths. Produced to ASTM A500 Grade B specifications, this structural tubing provides 58,000 PSI tensile strength and excellent weldability. Its medium diameter is ideal for fabricating equipment frames, handrails, support columns, and roll cages. The hot-rolled finish is ready for welding and can be painted or coated. In stock for Los Angeles pickup. Learn More

Durable Galvanized Slotted Angle for versatile framing and support applications. Fabricated from commercial-grade steel with a corrosion-resistant galvanized finish meeting ASTM A653 coating standards. The 1-1/2" x 1-1/2" x 16GA profile provides reliable integrity for MRO and construction projects. Learn More

This industrial-grade construction adhesive is engineered for high-strength bonding on a variety of substrates. Compliant with ASTM C557 standards, it provides a durable, reliable bond for MRO, fabrication, and construction projects. Ideal for securing panels, framing, and other materials where a permanent hold is critical. Learn More

Galvanized Slotted Angle (1-1/2" x 1-1/2" x 16GA) is a versatile framing material made from durable, corrosion-resistant galvanized steel meeting ASTM A653 standards. It is perfect for constructing custom shelving, racks, and supports for industrial MRO and fabrication projects. The pre-punched slotted pattern allows for simple, bolt-together assembly. Learn More

This 1-1/2" Sq Pressed Steel Cap provides a clean, protective finish for square tubing. Made from durable, weldable pressed steel, it is designed for ornamental fencing, gates, and railing projects. Meets industry standards for dimensional accuracy and fit. Learn More

The L-Clip Welding Tab is a critical fabrication component made from high-quality, weldable mild steel. Measuring 1-1/2" x 3-1/2", this tab is engineered for creating strong, precise fixturing points and conforms to general industry standards for material quality and weldability. Learn More

Our 260 Construction Adhesive is a high-strength formulation engineered for demanding industrial applications. Compliant with ASTM C557, this adhesive provides a durable, reliable bond for a wide range of construction and fabrication materials. Learn More

3/4" OD x 0.065" wall 304 Stainless Steel Round Tube with a 180 grit polished finish. Conforms to ASTM A269 and offers 73,200 PSI tensile strength. This grade combines excellent corrosion resistance and weldability, making it ideal for architectural and decorative applications like handrails, guardrails, and trim. The polished surface provides a clean, aesthetic appearance. In stock for immediate Los Angeles pickup. Learn More

This 4” x 1/16” x ⅜” cut-off wheel is an industrial-grade abrasive tool for high-speed cutting. Compliant with ANSI B7.1 safety standards, it features fiberglass reinforcement for enhanced durability and stability at its maximum 22,000 RPM rating. Learn More

3/4" OD x 0.125" wall 6061-T6 Aluminum Round Tube, 144" length. This versatile tubing conforms to ASTM B210, offering 45,000 PSI tensile strength, excellent weldability, and superior corrosion resistance. Its high strength-to-weight ratio and small diameter make it ideal for lightweight structural frames, furniture, custom automotive parts, and support braces. In stock for same-day Los Angeles pickup. Learn More

Size 12 rubber boots with a 16" height for maximum protection. Designed for industrial and construction environments, these boots feature a waterproof, seamless construction and a slip-resistant tread for safety on wet surfaces. Durable and flexible for all-day comfort. In stock for immediate pickup at our Los Angeles location. Learn More

2" x 2" x 0.120" wall 304 Stainless Steel Square Tube, supplied in 20-foot lengths. Conforms to ASTM A269 with 73,200 PSI tensile strength, excellent weldability, and superior corrosion resistance. This medium-sized tube is ideal for structural applications like equipment frames, support columns, architectural handrails, and guardrails where strength and aesthetics are required. In stock for same-day Los Angeles pickup. Learn More

3" x 5/8" 1018 Cold Rolled Steel Flat Bar, 144" length. Conforms to ASTM A108 with 63,800 PSI tensile strength, excellent machinability, and superior dimensional tolerances. Its smooth, scale-free surface is ideal for painting or plating. This medium-width bar is used for structural bracing, machine ways, and base plates. In stock for same-day Los Angeles pickup. Learn More

This industrial-grade 0.8mm (.030") MIG welding wire is supplied on 33 LBS spools. Manufactured to meet or exceed AWS/ASME certification standards, it ensures consistent performance for professional fabrication and repair on mild and low-alloy steels. Learn More

1/2" x 3" 6061-T6 Aluminum Flat Bar, sold in 144" lengths. Conforms to ASTM B211. This versatile alloy provides 45,000 PSI tensile strength, good machinability, and excellent corrosion resistance. The T6 temper indicates it has been heat-treated for maximum strength. Its medium width is ideal for structural bracing, machine ways, base plates, and custom fabricated parts. In stock for immediate Los Angeles pickup. Learn More

24 Gauge Galvanized B-Deck sheet, measuring 36" x 72". Conforming to ASTM A653, this structural panel features a protective zinc coating for excellent corrosion resistance. The base steel offers a minimum yield strength of 36,000 PSI. Ideal for roofing, floor decking, and siding in commercial and residential construction. Lightweight yet strong, it provides a durable, low-maintenance solution. In stock for Los Angeles pickup. Learn More

3/4" x 1/2" Hot Rolled Steel Flat Bar, 240" length. A versatile structural steel conforming to ASTM A36 with 36,000 PSI minimum yield strength. Known for its excellent weldability and good formability. The small width is ideal for fabricating custom brackets, support straps, shims, and light-duty frames. In stock for immediate Los Angeles pickup. Learn More

0.063" x 48" x 96" (4x8) sheet of 3003-H14 Aluminum. This versatile alloy meets ASTM B209 standards and provides an excellent combination of moderate strength (22,000 PSI tensile), high ductility, and superior corrosion resistance. Its excellent formability makes it ideal for general sheet metal work, HVAC ductwork, fuel tanks, and fan blades. In stock for immediate Los Angeles pickup. Learn More

0.125" x 48" x 120" 3003-H14 Aluminum Sheet. This versatile sheet conforms to ASTM B209, offering excellent formability, weldability, and good corrosion resistance. With a tensile strength of 22,000 PSI, this medium-thickness sheet is ideal for structural panels, machine guards, trailer siding, and general sheet metal fabrication. In stock for same-day cutting and pickup in Los Angeles. Learn More

The 6-inch V-Groove Wheel Box is an industrial-grade component for heavy-duty track applications. Constructed from durable steel and cast iron, it features high load capacity ratings suitable for large sliding gates and material handling systems. This assembly is designed for reliable, smooth operation on angle iron tracks. Learn More

Our 12-inch industrial door spring is engineered from high-tensile spring steel for maximum durability and cycle life. Designed to meet ASTM A227/A228 performance standards, it provides reliable tension for heavy-duty commercial and industrial doors. Features a corrosion-resistant zinc-plated finish for long-lasting use. Learn More

The C-Scroll (5112A) is a classic decorative element forged from high-quality Class 25-30 gray iron. This architectural-grade component is designed to add an elegant, traditional finish to custom fences, gates, and railings in fabrication projects. Learn More

This 2 Inch Post Ball Cap provides a durable, decorative finish for square or round tubing. Fabricated from Class 25-30 gray cast iron, it is designed for welding onto fences, gates, and handrails, offering a classic architectural look. Learn More

The 1-¼” Single Lockbox with a single hole is an essential component for security gates and fences. Constructed from high-quality, weldable steel, it provides a durable housing for gate locks. Designed for easy installation and long-term performance in commercial and residential applications. Learn More

This industrial-grade HP Air Spray Gun features a durable aluminum body, a 1.88mm nozzle, and a 1000cc aluminum cup. Engineered for high-volume application, it provides excellent atomization for industrial primers, topcoats, and DTM coatings meeting MIL-SPEC performance criteria. Learn More

The 251V is a high-quality decorative ornamental element crafted from Class 25-30 gray iron. Its durable composition is ideal for architectural detailing, custom fencing, gates, and other fabrication projects requiring classic, robust designs. Learn More

A36 Hot Rolled Steel Angle with 6" x 6" legs, 5/16" thickness, and a 240" length. Conforming to ASTM A36, this structural angle provides a minimum yield strength of 36,000 PSI and excellent weldability for demanding applications. Its large profile makes it ideal for heavy structural frames, building columns, equipment bases, and industrial supports. In stock for immediate Los Angeles pickup. Learn More

1" x 1" Hot Rolled Steel Square Tube with a 16 gauge (0.065") wall thickness, sold in 240" (20-foot) lengths. Conforming to ASTM A500 Grade B, this tubing provides a minimum 46,000 PSI yield strength, making it ideal for structural applications. Its excellent weldability is suited for trailer frames, supports, equipment bases, and general fabrication projects. In stock for immediate Los Angeles pickup. Learn More

This 6 Inches Tube Ring is a versatile ornamental component engineered for fabricating handrails, fences, and gates. Constructed from durable, weldable steel, it provides a secure and decorative connection point. Ideal for both new construction and MRO projects requiring reliable hardware. Learn More

This 2" Square Pressed Steel Cap provides a clean, protective finish for square tubing and fence posts. Fabricated from durable, weldable mild steel, it prevents water ingress and adds a professional aesthetic to any ornamental ironwork project. Learn More

This 1-¼” Single Hole Lockbox is fabricated from high-quality, weldable steel. Designed for security gate and fence applications, it provides a durable housing for standard lock mechanisms. Its single-hole configuration ensures straightforward installation and compatibility. Learn More

1-1/4" x 1-1/4" x 3/16" A36 Hot Rolled Steel Angle, often called angle iron. This structural grade steel conforms to ASTM A36, providing a minimum yield strength of 36,000 PSI and excellent weldability for general fabrication. Its small profile is ideal for light framing, support brackets, trim, and equipment guards. In stock for immediate cutting and same-day Los Angeles pickup. Learn More

A36 Hot Rolled Steel Angle measuring 1-1/2" x 1-1/2" with a 1/4" thickness, in a 20-foot (240") length. This general-purpose structural steel conforms to ASTM A36, offering a minimum yield strength of 36,000 PSI and excellent weldability. Its medium size is ideal for structural framing, equipment manufacturing, and industrial shelving where reliable strength is required. In stock for Los Angeles pickup. Learn More

This 5-inch tube ring is crafted from high-quality Class 25-30 gray cast iron, providing excellent durability for ornamental and architectural applications. Designed for seamless integration with standard tubing for fences, gates, and handrails. Learn More

Size 9 industrial-grade rubber rain boots featuring a 16-inch height for superior protection in wet and muddy conditions. Built with a 100% waterproof, seamless construction and a slip-resistant lug outsole for secure traction on demanding job sites. Ideal for construction, landscaping, and general maintenance work. In stock for Los Angeles pickup. Learn More

Our 3-1/2x2-1/4 Weldable Butt Hinges are engineered from high-strength, low-carbon steel for maximum weld penetration and durability. These components are designed for heavy-duty applications where a permanent, strong pivot is required. Ideal for steel gates, doors, and MRO projects. Learn More

Our industrial-grade Black Nitrile Disposable Gloves offer superior puncture and chemical resistance. These powder-free gloves are ANSI/ISEA 105 rated for reliable hand protection in demanding MRO, fabrication, and general-purpose applications. Packaged in a convenient 100-piece box. Learn More

Our 5-inch barrel hinges are constructed from high-strength, weldable steel for maximum durability. Engineered for heavy-duty gates and doors, these hinges provide a smooth, reliable pivot point for industrial fabrication and MRO projects. The plateless design allows for direct welding to steel surfaces. Learn More

Our 7-inch barrel hinges are engineered from heavy-duty, weldable carbon steel for maximum durability and strength. Designed for high-load applications, these hinges provide a smooth, reliable pivot for industrial gates and security doors. The robust construction ensures long-lasting performance in demanding MRO and fabrication environments. Learn More

The Bobco Mini Portable Welding Machine is a versatile dual-voltage (110V/220V) unit designed for stick welding. It is compatible with AWS-certified electrodes from 1/16" to 1/8" in diameter, delivering reliable performance for light fabrication, repair, and MRO tasks. Learn More

6061-T6 Aluminum Flat Bar measuring 1/4" thick by 6" wide in a 144" length. Conforms to ASTM B211. This versatile alloy offers a combination of high strength (45,000 PSI tensile), excellent corrosion resistance, and good machinability. The large width makes it ideal for base plates, heavy structural supports, and machined components. In stock for same-day Los Angeles pickup. Learn More

1-1/2" NPS Schedule 40 Galvanized Steel Pipe, sold in 21-foot (252") lengths. Conforming to ASTM A53 Grade B, this pipe provides a minimum 60,000 PSI tensile strength and superior corrosion resistance from its zinc coating. Its versatile size is ideal for plumbing mains, structural handrails, fence posts, and other outdoor applications requiring durability. In stock Los Angeles. Learn More

26 Gauge Galvanized PBR Steel Sheet, measuring 36 inches wide by 120 inches long. Conforming to ASTM A653, this panel features a protective zinc coating for excellent corrosion resistance. With a base steel yield strength of 36,000 PSI, it's ideal for roofing, siding, and agricultural structures. Its lightweight profile simplifies installation. In stock for Los Angeles pickup. Learn More

2" x 2" Galvanized Steel Square Tube with a 16 gauge wall, 24-foot length. Conforms to ASTM A500 Grade B with 58,000 PSI tensile strength. The hot-dip galvanized zinc coating provides excellent corrosion resistance for outdoor applications. This medium-sized tube is ideal for fabricating trailer frames, gate frames, and structural supports. In stock for Los Angeles pickup. Learn More

6" Nominal Pipe Size (NPS) Hot Rolled Black Pipe with a Schedule 40 wall (0.280"). Manufactured to meet ASTM A53 Grade B standards, this pipe provides a minimum tensile strength of 60,000 PSI and excellent weldability. Its large diameter is ideal for industrial process piping, structural columns, and main water lines. In stock for Los Angeles pickup. Learn More

3/4" x 3/8" Hot Rolled Steel Flat Bar in 20 ft lengths. Made from structural A36 steel, it meets ASTM A36 specifications and offers a minimum yield strength of 36,000 PSI. This small-profile flat bar is excellent for fabricating brackets, straps, shims, and light-duty frames where weldability and strength are required. In stock for immediate Los Angeles pickup or delivery. Learn More

4" Hot Rolled Standard I-Beam (S-Beam) manufactured from A36 carbon steel. Conforms to ASTM A36 with a minimum yield strength of 36,000 PSI and excellent weldability. The 4" height and 7.7 lbs/ft weight provide high strength for structural applications, including building frames, machinery bases, and support trusses. In stock for Los Angeles pickup. Learn More

1" Outer Diameter x 0.083" Wall Hot Rolled Steel Round Tube in 240" lengths. Conforming to ASTM A500 Grade B, this structural tubing provides a minimum yield strength of 46,000 PSI and excellent weldability for fabrication. Its medium size is well-suited for equipment frames, handrails, roll cages, and general structural supports. In stock for immediate Los Angeles pickup. Learn More

1" x 1" Hot Rolled Steel Square Bar in 240" lengths. Made from general-purpose A36 steel, it conforms to ASTM A36 specifications and provides a minimum yield strength of 36,000 PSI. Its excellent weldability and formability make it ideal for structural frames, brackets, trailer components, and general fabrication. This medium-sized bar is a versatile choice for construction and industrial maintenance. In stock for Los Angeles pickup. Learn More

The 1-1/4 Inch Square Plastic Cap provides a clean, finished look for square tubing applications. Made from durable, weather-resistant black plastic, it protects against sharp edges and internal debris. This cap offers a secure press-fit for reliability in fencing, furniture, and equipment fabrication. Learn More

Our 1-1/4 Double Lock Box is a durable gate hardware component crafted from high-strength Class 25-30 gray cast iron. Designed for 1-1/4" square tubing, it provides a secure housing for lock mechanisms in ornamental fences and security gates. Ideal for industrial fabrication and commercial applications. Learn More

4" NPS Schedule 40 Galvanized Steel Pipe, sold in 21-foot lengths. Conforming to ASTM A53 Grade B, this pipe has a 60,000 PSI tensile strength and a hot-dip zinc coating for superior corrosion resistance. Its large diameter is ideal for main water lines, industrial process piping, and structural columns. In stock for same-day Los Angeles pickup. Learn More

1" x 1" x 1/4" Hot Rolled Steel Angle in 20-foot lengths. A versatile structural shape conforming to ASTM A36 with a minimum yield strength of 36,000 PSI. This material offers excellent weldability and good machinability, making it easy to fabricate. Its small profile is ideal for light structural framing, equipment guards, mounting brackets, and general repair projects. In stock for Los Angeles pickup. Learn More

A36 Hot Rolled Steel Angle measuring 4" x 3" legs with 1/4" thickness, in a 20-foot length. This structural angle conforms to ASTM A36 standards, offering a minimum yield strength of 36,000 PSI and excellent weldability. Its large size provides substantial rigidity, making it ideal for heavy structural frames, industrial equipment bases, and support bracing in construction projects. In stock for Los Angeles pickup. Learn More

3/4" NPS Schedule 40 Hot Rolled Black Pipe, available in 21 ft lengths. Conforms to ASTM A53 Grade B, with a minimum tensile strength of 60,000 PSI. This pipe offers excellent weldability and is a versatile, economical choice for fluid/gas transfer and structural uses like handrails. The 'black' finish is a result of the hot rolling process. In stock for immediate Los Angeles pickup. Learn More

1 inch by 1/8 inch A36 Hot Rolled Steel Flat Bar, 240-inch length. Conforming to ASTM A36, this bar offers a minimum yield strength of 36,000 PSI and excellent weldability for structural applications. Its medium size is ideal for support braces, frame components, and general repair work. In stock for immediate cutting and pickup in Los Angeles. Learn More

A36 Hot Rolled Steel Flat Bar measuring 1-1/4" wide by 3/16" thick. This versatile structural steel conforms to ASTM A36 and offers a minimum yield strength of 36,000 PSI. Its excellent weldability and formability make it a top choice for general fabrication, structural bracing, and industrial repairs. In stock for immediate cutting and pickup in Los Angeles. Learn More

2-1/2" x 3/8" Hot Rolled A36 Steel Flat Bar. This structural grade steel conforms to ASTM A36 and offers excellent weldability and good machinability. With a tensile strength of 58,000-80,000 PSI, it's ideal for manufacturing, construction, and industrial repair. Its medium size is suited for structural bracing, equipment frames, and base plates. In stock for Los Angeles pickup. Learn More

6" x 1/2" A36 Hot Rolled Steel Flat Bar, 240" length. Conforms to ASTM A36 with 36,000 PSI minimum yield strength and excellent weldability. This large-format structural bar provides robust support for heavy-duty applications. Its size is ideal for base plates, heavy structural components, die components, and trailer frames. In stock for immediate cutting and pickup in Los Angeles. Learn More

1-1/2" x 1" Hot Rolled Steel Rectangular Tube with a 0.120" wall thickness. Manufactured to ASTM A500 Grade B specifications, this structural tubing provides a high strength-to-weight ratio and excellent weldability. Ideal for equipment frames, structural supports, trailer cross-members, and general fabrication. In stock for immediate Los Angeles pickup. Learn More

1-1/2" x 3/4" Hot Rolled Steel Rectangular Tube with a 0.065" wall, sold in 20-foot lengths. Conforms to ASTM A500 Grade B with 58,000 PSI tensile strength and excellent weldability. This hollow structural section (HSS) is ideal for trailer frames, equipment bases, gate frames, and other general fabrication projects requiring a good strength-to-weight ratio. In stock for Los Angeles pickup. Learn More

3" x 2" x 0.065" wall, 20 ft length Hot Rolled Steel Rectangular Tube. Conforms to ASTM A500 Grade B with 58,000 PSI tensile strength. This structural tube offers an excellent strength-to-weight ratio and is easily welded. Ideal for building frames, trailer cross-members, and machinery supports where robust performance is required. In stock for immediate Los Angeles pickup. Learn More

1-1/2" OD x 0.083" wall A500B Hot Rolled Steel Round Tube. Conforming to ASTM A500, this structural grade tubing offers a minimum 58,000 PSI tensile strength and excellent weldability. Its medium diameter is ideal for fabricating equipment frames, handrails, roll cages, and general structural supports. Available in 20 ft lengths for same-day pickup in Los Angeles. Learn More

3/4" x 3/4" Hot Rolled Steel Square Tube with a 0.072" wall thickness, sold in 20-foot lengths. This A500 Grade B tube meets ASTM A500 specifications and offers a minimum yield strength of 46,000 PSI. Its excellent weldability and high strength-to-weight ratio make it ideal for structural frames, supports, gates, and general fabrication projects. In stock for Los Angeles pickup. Learn More

2" x 2" Hot Rolled Steel Square Tube with a 0.188" (3/16") wall thickness. Conforms to ASTM A500 Grade B with 46,000 PSI minimum yield strength. This structural tubing, also known as HSS, offers an excellent strength-to-weight ratio, superior weldability, and durability. Ideal for trailer frames, equipment bases, roll cages, and general fabrication projects. In stock for same-day pickup in Los Angeles. Learn More

Our 4-inch Tube Ring is a high-quality decorative component forged from industrial-grade Class 25-30 gray cast iron. Designed for durability and easy integration, it's ideal for ornamental fencing, gates, and architectural fabrication projects. Learn More

This 2-1/2" Square Pressed Steel Cap provides a durable, clean finish for square tubing. Made from commercial-grade pressed steel, it is ideal for ornamental fencing, handrails, and gates. The cap is supplied with a raw, weldable finish for easy fabrication. Learn More

The 1-1/2 Double Lock Box is an industrial-grade hardware component for fabricating secure gate and fence locking systems. Made from weldable steel, it provides a durable housing for standard lock mechanisms, making it ideal for ornamental and security applications. Learn More

The 3 Inch Post Ball Cap is a durable, decorative finial for fence posts and railings. Manufactured from high-strength Class 25-30 gray iron, it provides a classic architectural finish and protects the post top from weather. Ideal for both new fabrication and MRO projects. Learn More

A36 Hot Rolled Steel Angle measuring 1-1/4" x 1-1/4" legs with a 1/8" thickness. Conforming to ASTM A36, this versatile structural angle offers a minimum yield strength of 36,000 PSI and excellent weldability. Its small profile is perfect for light-duty framing, custom brackets, equipment guards, and general fabrication projects. In stock for immediate Los Angeles pickup. Learn More

A36 Hot Rolled Steel Angle measuring 1-1/2" x 1-1/2" with a 1/8" thickness, supplied in 20-foot lengths. This structural angle conforms to ASTM A36 standards and offers a minimum yield strength of 36,000 PSI with excellent weldability. Its medium size is ideal for structural framing, equipment bases, and general fabrication projects requiring robust support. In stock and ready for same-day pickup in Los Angeles. Learn More

2" x 2" x 3/16" A36 Hot Rolled Steel Angle in 20-foot lengths. Conforming to ASTM A36, this structural angle provides a minimum 36,000 PSI yield strength and excellent weldability for fabrication. Its versatile medium size is ideal for structural framing, equipment bases, industrial shelving, and general repairs. In stock and available for same-day pickup in Los Angeles. Learn More

1-1/4" NPS, Schedule 10 Hot Rolled Black Pipe manufactured to ASTM A53 Grade B specifications. This carbon steel pipe offers 60,000 PSI tensile strength and excellent weldability. The medium diameter is ideal for plumbing mains, HVAC piping, handrails, and other structural applications. The uncoated black finish is suitable for indoor use or applications requiring a custom coating. In stock for Los Angeles pickup. Learn More

C7 x 9.8 A36 Hot Rolled Steel Channel, measuring 7" deep with a 2.09" flange. This structural channel conforms to ASTM A36 standards and provides a minimum yield strength of 36,000 PSI. Its excellent weldability and strength-to-weight ratio make it ideal for equipment frames, vehicle chassis, structural supports, and general fabrication projects. In stock and available for immediate pickup in Los Angeles. Learn More

2" x 1/2" A36 Hot Rolled Steel Flat Bar, 20-foot (240") length. Conforms to ASTM A36 with 36,000 PSI minimum yield strength and excellent weldability. This medium-width bar is a versatile choice for structural bracing, machine ways, base plates, and general fabrication projects. Its hot-rolled finish is suitable where precise tolerances are not critical. In stock for Los Angeles pickup. Learn More

3" x 5/8" Hot Rolled Steel Flat Bar, 240" length. Conforms to ASTM A36 with a minimum yield strength of 36,000 PSI and excellent weldability. This versatile structural steel bar is ideal for general fabrication, structural bracing, support straps, and base plates. Its medium width provides a solid foundation for equipment and machinery. In stock for same-day Los Angeles pickup. Learn More

3" x 1" Hot Rolled Steel Rectangular Tube with a 0.120" wall thickness (11 gauge), sold in 240" (20 ft) lengths. This structural tubing conforms to ASTM A500 Grade B, providing a minimum yield strength of 46,000 PSI. Its high strength-to-weight ratio and excellent weldability make it ideal for trailer frames, equipment bases, and general fabrication. In stock for same-day Los Angeles pickup. Learn More

1-1/2" OD x 0.120" wall Hot Rolled Steel Round Tube, 240" length. Produced to meet ASTM A500 Grade B specifications, this structural tubing offers 58,000 PSI tensile strength and excellent weldability. Its medium diameter is ideal for fabrications requiring high strength-to-weight performance, including equipment frames, roll cages, handrails, and structural supports. In stock for Los Angeles pickup. Learn More

1" x 1" Hot Rolled Steel Square Tube with a 0.12" wall thickness, in 20-foot lengths. Manufactured to ASTM A500 Grade B specifications, this structural tubing offers a minimum yield strength of 46,000 PSI and excellent weldability. Its medium size is ideal for constructing durable equipment frames, structural supports, handrails, and general fabrication projects. In stock for same-day Los Angeles pickup. Learn More

This 1/8" 6013 All-Purpose Welding Rod is an AWS/ASME certified electrode designed for versatile performance. Ideal for general fabrication and repair on mild steel, it offers a stable arc and easy slag removal. Packaged in a convenient 10 LB container for MRO and project use. Learn More

The S-Scroll (5024D) is a decorative hardware element crafted from high-quality Class 25-30 gray iron. Its classic design is ideal for adding architectural detail to fences, gates, and furniture. This industrial-grade component ensures durability and an authentic forged appearance. Learn More

12 Gauge (48" x 120") Cold Rolled Steel Sheet, typically 1018 grade. Conforms to ASTM A1008 specifications and provides a tensile strength of 63,800 PSI. The cold reduction process creates a smooth, clean surface finish and tight dimensional tolerances, making it ideal for forming and welding. Excellent for automotive panels, appliance casings, and equipment enclosures. In stock for Los Angeles pickup. Learn More

Versatile 1-1/4" x 1-1/4" x 16GA slotted angle for custom framing and support. This 120" angle is manufactured from commercial steel and features a galvanized coating (per ASTM A653) for excellent corrosion resistance, making it ideal for MRO and fabrication. Learn More