Search results for: 'category width flange beam'

26 Gauge Galvanized Corrugated Steel Sheet, measuring 36 inches in nominal width by 120 inches in length. Conforms to ASTM A653 specifications with a G90 zinc coating for excellent corrosion resistance. This lightweight, durable panel is ideal for roofing, siding, agricultural buildings, and decorative applications. Its corrugated profile adds rigidity. In stock for immediate pickup in Los Angeles. Learn More

A 3/8" x 1-1/4" 6061-T6 Aluminum Flat Bar, supplied in a 144" length. This versatile bar conforms to ASTM B211 and features a 45,000 PSI tensile strength, good machinability, and excellent corrosion resistance. Its medium width makes it ideal for structural bracing, support brackets, machine ways, and general fabrication projects. In stock for same-day pickup in Los Angeles. Learn More

A36 Hot Rolled Steel Flat Bar, 8" wide by 1/4" thick in a 240" length. This structural bar meets ASTM A36 standards and offers a minimum yield strength of 36,000 PSI with excellent weldability. The large width makes it ideal for heavy structural applications, including base plates for columns and machinery, support braces, and frame components. In stock for same-day Los Angeles pickup. Learn More

2" x 1/2" A36 Hot Rolled Steel Flat Bar, 20-foot (240") length. Conforms to ASTM A36 with 36,000 PSI minimum yield strength and excellent weldability. This medium-width bar is a versatile choice for structural bracing, machine ways, base plates, and general fabrication projects. Its hot-rolled finish is suitable where precise tolerances are not critical. In stock for Los Angeles pickup. Learn More

4" x 1/4" Cold Rolled Flat Bar, 144" length, made from 1018 low-carbon steel. Conforms to ASTM A108 standards, offering 63,800 PSI tensile strength, tight dimensional tolerances, and a smooth, scale-free finish. Its excellent machinability and weldability make it a reliable choice. The large width is ideal for base plates, heavy structural components, and machine frames. In stock for same-day Los Angeles pickup. Learn More

3/4" x 1/8" A36 Hot Rolled Steel Flat Bar, 240" length. Conforms to ASTM A36 with 36,000 PSI minimum yield strength and excellent weldability. The hot-rolled process gives it a scaly finish and makes it cost-effective for general fabrication. This small-width bar is ideal for manufacturing support brackets, straps, trim, and small frame stock. In stock for Los Angeles pickup. Learn More

A36 Hot Rolled Steel Flat Bar measuring 4 inches wide by 1/8 inch thick, in a 240-inch length. This structural steel conforms to ASTM A36 and provides a minimum yield strength of 36,000 PSI. Its excellent weldability and formability make it a versatile choice. The large width is ideal for manufacturing base plates, heavy structural supports, and frame components. In stock for Los Angeles pickup. Learn More

A36 Hot Rolled Steel Flat Bar measuring 5 inches wide by 1/8 inch thick. Conforming to ASTM A36, this structural steel bar offers 36,000 PSI minimum yield strength and excellent weldability. Its large width makes it ideal for manufacturing base plates, heavy structural supports, trailer frames, and die components. This versatile, low-cost material is easily fabricated. In stock for same-day Los Angeles pickup. Learn More

2-1/2" x 3/16" A36 Hot Rolled Steel Flat Bar. A general-purpose structural steel conforming to ASTM A36, with 36,000 PSI minimum yield strength. This bar offers excellent weldability and formability, making it a versatile choice for fabrication. The medium width is ideal for structural bracing, equipment frames, and base plates. In stock for same-day cutting and Los Angeles pickup. Learn More

1/2 inch Nominal Pipe Size (NPS) Hot Rolled Black Pipe with a Schedule 40 wall. This product conforms to ASTM A53 Grade B specifications, providing 60,000 PSI tensile strength and excellent weldability. The small diameter is ideal for plumbing, natural gas lines, compressed air systems, and light structural applications like handrails. Standard uncoated 'black' finish. In stock for Los Angeles pickup. Learn More

1 Inch Schedule 40 Hot Rolled Black Pipe, sold in 21-foot lengths. Manufactured to ASTM A53 Grade B standards, it offers 60,000 PSI tensile strength and excellent weldability. This medium-sized pipe is ideal for natural gas lines, fire sprinkler systems, scaffolding, and general structural fabrication. An economical choice for fluid conveyance and support applications. In stock for Los Angeles pickup. Learn More

1-1/2 inch Nominal Pipe Size (NPS) Hot Rolled Black Pipe with a Schedule 40 wall thickness. Made from carbon steel conforming to ASTM A53 Grade B specifications, this pipe offers a minimum tensile strength of 60,000 PSI and excellent weldability. Its medium size is well-suited for plumbing mains, structural posts, handrails, and fire protection systems. In stock for immediate Los Angeles pickup. Learn More

2 inch Schedule 40 Hot Rolled Black Pipe. Conforms to ASTM A53 Grade B standards, offering 60,000 PSI tensile strength and excellent weldability for strong, reliable joints. This medium-sized pipe is ideal for plumbing mains, HVAC piping, fire sprinkler systems, and structural applications like handrails and support posts. In stock and ready for same-day pickup in Los Angeles. Learn More

5" Nominal Pipe Size (NPS) Hot Rolled Black Pipe with a Schedule 40 wall. This A53 Grade B steel pipe offers a minimum tensile strength of 60,000 PSI and excellent weldability. Its large diameter and robust wall thickness make it ideal for high-flow fluid transfer, main water lines, industrial process piping, and heavy-duty structural columns. In stock for Los Angeles pickup. Learn More

6" Nominal Pipe Size (NPS) Hot Rolled Black Pipe with a Schedule 40 wall (0.280"). Manufactured to meet ASTM A53 Grade B standards, this pipe provides a minimum tensile strength of 60,000 PSI and excellent weldability. Its large diameter is ideal for industrial process piping, structural columns, and main water lines. In stock for Los Angeles pickup. Learn More

Secure equipment and materials with the Regal 2” x 20ft Ratchet Cargo Lash. This industrial tie-down is made from durable polyester webbing, meets WSTDA-T-1 standards, and features a 3,335 lbs Working Load Limit (WLL) for reliable performance. Learn More

1-1/4" x 1/2" 304 Stainless Steel Flat Bar, 144" length. Conforming to ASTM A276, this austenitic stainless offers 73,200 PSI tensile strength, excellent weldability, and superior corrosion resistance. Its versatile rectangular profile is ideal for structural bracing, equipment framework, and architectural trim. This medium-width bar is a durable choice for food processing and general fabrication. In stock for Los Angeles pickup. Learn More

1/2" x 3" 6061-T6 Aluminum Flat Bar, sold in 144" lengths. Conforms to ASTM B211. This versatile alloy provides 45,000 PSI tensile strength, good machinability, and excellent corrosion resistance. The T6 temper indicates it has been heat-treated for maximum strength. Its medium width is ideal for structural bracing, machine ways, base plates, and custom fabricated parts. In stock for immediate Los Angeles pickup. Learn More

2" x 5/8" 6061-T6 Aluminum Flat Bar, 144" length. Conforms to ASTM B211 with 45,000 PSI tensile strength, excellent machinability, and superior corrosion resistance. This versatile, medium-width bar is ideal for structural bracing, machine ways, base plates, and custom fabricated parts. Its high strength-to-weight ratio makes it a top choice for manufacturing and structural projects. In stock for Los Angeles pickup. Learn More

This 1" x 3/4" 6061-T6 Aluminum Flat Bar offers an excellent strength-to-weight ratio and good workability. Conforming to ASTM B211, it provides 45,000 PSI tensile strength, superior corrosion resistance, and excellent weldability. This medium-width bar is ideal for structural bracing, machine ways, support brackets, and general fabrication projects. In stock and available for same-day pickup in Los Angeles. Learn More

1-1/4" x 3/8" 1018 Cold Rolled Flat Bar, sold in 144" lengths, conforms to ASTM A108. It features a tensile strength of 63,800 PSI, excellent machinability, and good weldability. The cold-drawn process provides a smooth, scale-free surface and tight dimensional tolerances. This medium-width bar is ideal for structural bracing, machine ways, and general fabrication projects. In stock for Los Angeles pickup. Learn More

1-1/2" x 1" 1018 Cold Rolled Steel Flat Bar, 144" length. Conforms to ASTM A108 with 63,800 PSI tensile strength and excellent machinability. The cold drawing process provides a smooth, scale-free surface and tight dimensional tolerances. This medium-width bar is ideal for structural bracing, machine ways, and base plates requiring precision and a clean finish. In stock for Los Angeles pickup. Learn More

A36 Hot Rolled Steel Flat Bar, 1-1/2" wide by 3/16" thick, in 240-inch lengths. Conforms to ASTM A36 with 36,000 PSI minimum yield strength. This low-carbon steel offers excellent weldability and good formability. As a medium-width bar, it is ideal for structural bracing, equipment frames, base plates, and general fabrication projects. In stock for immediate Los Angeles pickup. Learn More

2" x 1/8" 304 Stainless Steel Flat Bar in 144" lengths. Conforming to ASTM A276, this bar delivers 73,200 PSI tensile strength with excellent corrosion resistance and weldability. Its versatile medium width is ideal for structural bracing, equipment framework, base plates, and architectural trim. Most stock is dual-certified 304/304L. In stock for same-day Los Angeles pickup. Learn More

6061-T6 Aluminum Flat Bar measuring 1/4" thick by 6" wide in a 144" length. Conforms to ASTM B211. This versatile alloy offers a combination of high strength (45,000 PSI tensile), excellent corrosion resistance, and good machinability. The large width makes it ideal for base plates, heavy structural supports, and machined components. In stock for same-day Los Angeles pickup. Learn More

A 4" x 1/2" 1018 Cold Rolled Steel Flat Bar, supplied in 144" lengths. Conforming to ASTM A108, this bar features a 63,800 PSI tensile strength, tight dimensional tolerances, and excellent machinability. The smooth, scale-free surface is ready for fabrication. Its substantial width makes it ideal for base plates, heavy structural bracing, and die components. In stock for Los Angeles pickup. Learn More

6" x 1/4" A36 Hot Rolled Steel Flat Bar, sold in 240" (20 ft) lengths. Conforming to ASTM A36, this structural steel offers a minimum yield strength of 36,000 PSI and excellent weldability. The large 6-inch width is ideal for manufacturing machinery base plates, heavy structural braces, and trailer frame components. In stock for same-day Los Angeles pickup. Learn More

1-1/2" x 5/8" 6061-T6 Aluminum Flat Bar, 144" length. Conforms to ASTM B211 with 45,000 PSI tensile strength, excellent weldability, and corrosion resistance. This versatile, medium-width bar is ideal for structural bracing, machine ways, mounting plates, and general fabrication. Its high strength-to-weight ratio makes it a top choice for projects requiring robust yet lightweight components. In stock for same-day Los Angeles pickup. Learn More

3/16" x 1-1/2" 304 Stainless Steel Flat Bar in a 144" length. Conforming to ASTM A276, this versatile bar offers excellent corrosion resistance, high ductility, and superior weldability. Its 73,200 PSI tensile strength makes it ideal for structural bracing, machine ways, and equipment framework. This medium-width bar is a popular choice for fabrication projects. In stock for Los Angeles pickup. Learn More

This 6061 Aluminum Flat Bar measures 2-1/2" wide by 1/8" thick. A highly versatile structural alloy, 6061-T6 conforms to ASTM B211 and offers 45,000 PSI tensile strength, excellent corrosion resistance, and good machinability. Its medium width is ideal for structural bracing, machine ways, base plates, and custom fabricated parts. In stock for same-day cutting and pickup in Los Angeles. Learn More

4" x 1/2" 6061-T6 Aluminum Flat Bar, 144" length. Conforms to ASTM B211, offering a high strength-to-weight ratio with 45,000 PSI tensile strength, excellent weldability, and good machinability. The large 4" width is ideal for manufacturing base plates, heavy structural components, die components, and support braces for industrial machinery. In stock for same-day cutting and pickup in Los Angeles. Learn More

A 4" wide by 1/8" thick 1018 Cold Rolled Steel Flat Bar, supplied in a 144" length. This bar meets ASTM A108 standards and features 63,800 PSI tensile strength, tight dimensional tolerances, and good weldability. The cold drawn finish provides a smooth, scale-free surface ideal for machining. Its large width makes it suitable for base plates, structural supports, and die components. In stock Los Angeles. Learn More

3/16" x 3" 6061-T6 Aluminum Flat Bar, 144" length. Conforms to ASTM B211, this versatile alloy offers 45,000 PSI tensile strength, excellent weldability, and good machinability. Its high strength-to-weight ratio and corrosion resistance make it ideal for structural frames, support braces, and base plates. This medium-width bar is a fundamental building block for fabrication projects. In stock for same-day Los Angeles pickup. Learn More

4 Inch x 3/16 Inch A36 Hot Rolled Steel Flat Bar. This structural steel bar conforms to ASTM A36 and features a minimum yield strength of 36,000 PSI with excellent weldability. The large 4-inch width is ideal for heavy-duty applications including structural base plates, trailer frames, equipment mounting, and general fabrication projects requiring robust support. In stock and ready for same-day pickup in Los Angeles. Learn More

1/8" x 1-1/4" 304 Stainless Steel Flat Bar, sold in 144" lengths. Conforming to ASTM A276, this versatile alloy provides 73,200 PSI tensile strength with excellent corrosion resistance and weldability. Its medium width is ideal for structural bracing, machine ways, supports, and general fabrication projects requiring superior durability and a clean finish. In stock for immediate Los Angeles pickup. Learn More

4" x 3/8" 6061-T6 Aluminum Flat Bar, 144" length. Conforming to ASTM B211, this alloy offers a versatile combination of 45,000 PSI tensile strength, good machinability, and excellent weldability. Its high strength-to-weight ratio and corrosion resistance make it ideal for demanding applications. This large width is perfect for structural frames, base plates, and heavy-duty brackets. In stock for same-day Los Angeles pickup. Learn More

1-1/4" x 1/4" Hot Rolled Steel Flat Bar, ASTM A36. This general-purpose structural steel offers a minimum yield strength of 36,000 PSI and excellent weldability. The hot rolling process gives it a scaly finish and makes it cost-effective for fabrication. This medium-width bar is ideal for structural bracing, machine ways, support brackets, and general repairs. In stock and available for pickup in Los Angeles. Learn More

A 3" x 1/2" Hot Rolled Steel Flat Bar conforming to ASTM A36. This general-purpose structural steel features 58,000 PSI tensile strength and excellent weldability. The hot-rolled process results in a scaly, mill finish suitable for applications where strength is prioritized over precise dimensions. Its medium width is ideal for structural bracing, support brackets, and general fabrication projects. In stock for immediate Los Angeles pickup. Learn More

2 Inch by 3/16 Inch Hot Rolled Steel Flat Bar, 240 inches long. Made from A36 structural steel, conforming to ASTM A36 specifications. This bar offers a minimum yield strength of 36,000 PSI and excellent weldability for easy fabrication. Its medium width is ideal for structural bracing, machine ways, wear strips, and general repairs. In stock and available for same-day pickup in Los Angeles. Learn More

3/4" diameter (#6) Grade 60 Hot Rolled Rebar, available in 20-foot (240") lengths. This reinforcing bar meets ASTM A615 standards and provides a minimum yield strength of 60,000 PSI. Its deformed surface ensures a strong mechanical bond with concrete, making it essential for foundations, slabs, and structural columns. In stock Los Angeles. Learn More

A 1" x 3" 6061-T6 Aluminum Flat Bar, sold in 144" lengths. This versatile, heat-treatable grade conforms to ASTM B211 and features a 45,000 PSI tensile strength, good machinability, and excellent corrosion resistance. Its medium width is ideal for structural bracing, support brackets, wear strips, and custom machined components. In stock for same-day Los Angeles pickup. Learn More

This 1/4" x 2-1/2" 6061-T6 Aluminum Flat Bar offers an excellent combination of strength, machinability, and corrosion resistance. Conforming to ASTM B211, it has a tensile strength of 45,000 PSI. Its T6 temper ensures optimal hardness for structural applications. This versatile, medium-width bar is ideal for structural bracing, machine ways, base plates, and custom fabricated parts. In stock for same-day Los Angeles pickup. Learn More

A36 Hot Rolled Steel Flat Bar, 10 inches wide by 1/4 inch thick, in a 240-inch (20-foot) length. This structural steel conforms to ASTM A36 specifications and offers a minimum yield strength of 36,000 PSI with excellent weldability. Its substantial width makes it ideal for heavy-duty applications like base plates, structural supports, and heavy equipment fabrication. In stock for same-day Los Angeles pickup. Learn More

1-1/4" x 1/2" A36 Hot Rolled Steel Flat Bar, sold in 240-inch (20 ft) lengths. This structural steel conforms to ASTM A36 and provides a minimum yield strength of 36,000 PSI. Its excellent weldability and formability make it a versatile choice for general fabrication. This medium-width bar is ideal for structural bracing, equipment frames, and base plates. In stock for Los Angeles pickup. Learn More

A36 Hot Rolled Steel Flat Bar, measuring 6 inches wide by 1/8 inch thick in a 240-inch length. This versatile structural steel conforms to ASTM A36 standards, offering a minimum yield strength of 36,000 PSI and excellent weldability. Its large width makes it ideal for manufacturing base plates, heavy equipment mounting, structural bracing, and general fabrication projects. In stock for same-day Los Angeles pickup. Learn More

2-1/2" diameter 304 Stainless Steel Round Bar, 144" length. Conforms to ASTM A276 with 73,200 PSI tensile strength, excellent weldability, and remarkable corrosion resistance. Its large diameter makes it ideal for heavy-duty shafts, forging stock, and large machined structural components where strength and durability are critical. In stock for Los Angeles pickup. Learn More

2-1/2" NPS Schedule 40 Hot Rolled Black Pipe, 21 ft length. Manufactured to ASTM A53 Grade B with 60,000 PSI tensile strength. This large-diameter pipe offers excellent weldability for plumbing, fire protection systems, and structural applications. Its thicker wall provides high-pressure ratings and structural integrity for main water lines, industrial process piping, and support columns. In stock for Los Angeles pickup. Learn More

6" x 3/16" A36 Hot Rolled Steel Flat Bar, supplied in a 240" (20 ft) length. This structural steel conforms to ASTM A36 standards and features a minimum yield strength of 36,000 PSI and excellent weldability. The large width makes it ideal for heavy-duty applications like base plates, structural supports, trailer frames, and general fabrication. In stock for same-day Los Angeles pickup. Learn More

4" x 5/8" A36 Hot Rolled Steel Flat Bar. Conforms to ASTM A36 with 36,000 PSI minimum yield strength. Features excellent weldability and good machinability. The hot-rolled process results in a scaly finish and slightly rounded edges. This large width is ideal for structural base plates, heavy equipment supports, trailer frames, and general fabrication projects. In stock for immediate Los Angeles pickup. Learn More

3" x 3" x 1/4" A36 Hot Rolled Steel Angle, sold in 240" lengths. Conforming to ASTM A36, this structural angle provides a minimum 36,000 PSI yield strength and excellent weldability. The 3-inch leg size is ideal for medium-duty structural framing, equipment bases, shelving, and general fabrication projects requiring robust support. In stock and available for same-day pickup in Los Angeles. Learn More

A36 Hot Rolled Steel Angle with 5" and 3" legs, a 3/8" thickness, and 240" length. This unequal leg angle conforms to ASTM A36, providing a minimum 36,000 PSI yield strength and excellent weldability. The large profile is ideal for heavy-duty structural applications, including building frames, equipment bases, and industrial supports. In stock and ready for same-day pickup in Los Angeles. Learn More

Grade 60 Hot Rolled Rebar, #8 size (1" diameter) in a 20-foot length. Conforming to ASTM A615, this reinforcing bar provides a minimum yield strength of 60,000 PSI for structural concrete applications. Its deformed surface ensures a strong mechanical bond, making it essential for reinforcing foundations, slabs, columns, and retaining walls. In stock for Los Angeles pickup. Learn More

A heavy-duty 1-1/2" x 3" Large L-Clip Bracket fabricated from A36 structural steel. This versatile hardware component is designed for strong right-angle connections in construction, framing, and industrial applications. It features a 3/8" pre-drilled hole for fast, secure installation and offers excellent weldability. Conforms to ASTM A36 specifications. In stock for Los Angeles pickup. Learn More

This 1/4" x 3/4" 6061-T6 Aluminum Flat Bar is a versatile, heat-treatable grade conforming to ASTM B211. It combines high strength (45,000 PSI tensile) with excellent weldability, machinability, and corrosion resistance. This small-width profile is ideal for fabricating custom brackets, support straps, base plates, and mounting blocks for machinery and structural projects. In stock and available for same-day pickup in Los Angeles. Learn More

This 5" x 5" Heavy Duty Square Steel Base Plate is engineered from high-strength carbon steel for maximum durability. It comes pre-drilled for secure anchoring in structural and fabrication applications. Designed for compatibility with common industrial fastening systems like ASTM A307. Learn More

The L-Clip Welding Tab is a critical fabrication component made from high-quality, weldable mild steel. Measuring 1-1/2" x 3-1/2", this tab is engineered for creating strong, precise fixturing points and conforms to general industry standards for material quality and weldability. Learn More

Our Industrial-Grade Gloss Black DTM Paint is a high-performance alkyd coating designed for direct application on metal. It provides excellent corrosion resistance and a durable, high-gloss finish suitable for demanding fabrication and MRO environments. Learn More

This industrial-grade Gloss White paint features advanced Direct-to-Metal (DTM) technology for superior single-coat application. Formulated as a durable alkyd coating, it provides excellent corrosion and weather resistance for demanding MRO and fabrication projects. Learn More

Our Gloss White DTM Oil-Based Paint is an industrial-grade alkyd coating designed for superior corrosion protection. This direct-to-metal formula ensures a durable, high-gloss finish on steel and other metal surfaces, ideal for demanding fabrication and MRO applications. Learn More

This 8" x 8" heavy-duty square steel base plate provides a robust foundation for structural and industrial applications. Made from high-strength carbon steel, it features pre-drilled holes for compatibility with heavy-duty fasteners meeting SAE J429 and ASTM standards. Learn More

This 1 1/4" x 1 3/4" small welding tab is manufactured from high-quality, weldable low-carbon steel. Featuring a 1/8" thickness and a 3/8" hole, it provides a reliable connection point for industrial fabrication and repair projects compatible with AWS certified consumables. Learn More

This 1/4" x 4-1/4" Cobalt Industrial Drill Bit is engineered from M35 steel with 5% cobalt for superior heat resistance. Conforming to ANSI/ASME B94.11M standards, its 135° split-point tip ensures precise starts and is ideal for drilling into stainless steel and cast iron. Learn More

This 1-1/2" x 3-7/8" oval welding tab is manufactured from high-quality, weldable mild steel for superior strength and ease of use. At 9 gauge (0.15") thick with two pre-drilled holes, it provides a robust mounting point for industrial fabrication and MRO projects. Learn More

This industrial-grade, oil-based DTM paint delivers a durable black semi-gloss finish. Its alkyd enamel formulation provides excellent corrosion resistance and adhesion directly on prepared metal surfaces, making it ideal for fabrication and MRO projects. Learn More

This industrial-grade, oil-based DTM (Direct-to-Metal) paint offers a durable flat black finish. Engineered for superior adhesion and corrosion resistance consistent with MIL-SPEC performance criteria, it is ideal for protecting steel and iron surfaces in fabrication and MRO projects. Learn More

Grade 60 Hot Rolled Rebar, #7 size (7/8" diameter) in 20-foot lengths. Meets ASTM A615 standards with a minimum yield strength of 60,000 PSI and tensile strength of 90,000 PSI. Its deformed surface provides a superior mechanical bond with concrete, making it essential for reinforcing foundations, slabs, and columns. In stock for same-day Los Angeles pickup. Learn More

Hot Rolled Steel Angle, 2-1/2" x 2-1/2" x 1/2". A36 steel conforms to ASTM A36, providing 36,000 PSI minimum yield strength and excellent weldability. This medium-sized angle is ideal for structural framing, equipment bases, and support brackets where strength and reliability are critical. Its hot-rolled surface is ready for fabrication and welding. In stock for Los Angeles pickup. Learn More

A36 Hot Rolled Steel Angle with 3" and 2" legs and a 3/16" thickness. This structural angle conforms to ASTM A36 specifications, providing a minimum yield strength of 36,000 PSI and excellent weldability. Its medium size is ideal for structural framing, equipment bases, support brackets, and general fabrication projects requiring robust, cost-effective steel components. In stock for same-day pickup in Los Angeles. Learn More

3" x 3" x 3/16" Hot Rolled Steel Angle, 240" length. Conforms to ASTM A36 with a minimum 36,000 PSI yield strength and excellent weldability. This medium-sized structural angle provides robust support for equipment bases, framing, and general fabrication. Its hot rolled finish has a mill scale surface. In stock for same-day Los Angeles pickup. Learn More

A36 Hot Rolled Steel Angle measuring 6" x 4" with a 5/16" thickness. This structural angle conforms to ASTM A36 standards and offers a minimum yield strength of 36,000 PSI with excellent weldability. The large profile is ideal for heavy structural applications, including building frames, industrial supports, and equipment manufacturing. Its strength and versatility make it a reliable choice for fabrication projects. In stock Los Angeles. Learn More

A36 Hot Rolled Steel Angle measuring 6" x 6" with a 3/8" thickness. This structural shape conforms to ASTM A36 standards, delivering a minimum yield strength of 36,000 PSI and excellent weldability for robust joints. Its large size is ideal for heavy-duty applications including building frames, industrial equipment bases, and trailer manufacturing. In stock for Los Angeles pickup. Learn More

1-1/2" x 1-1/2" x 3/16" Hot Rolled Steel Angle conforming to ASTM A36. This general-purpose structural steel provides a minimum 36,000 PSI yield strength and excellent weldability. The medium size is ideal for equipment frames, support bracing, heavy-duty shelving, and general fabrication. In stock and ready for same-day pickup or delivery in Los Angeles. Learn More

1-3/4" x 1-3/4" x 1/4" A36 Hot Rolled Steel Angle, sold in 240" (20 ft) lengths. Conforming to ASTM A36, this angle iron offers a minimum yield strength of 36,000 PSI and excellent weldability. Its versatile L-shape provides robust structural support, making it ideal for equipment framing, support brackets, and general fabrication projects. In stock for same-day Los Angeles pickup. Learn More

A36 Hot Rolled Steel Angle measuring 2" x 2" x 1/8" in 20-foot (240") lengths. This structural angle conforms to ASTM A36, providing a minimum yield strength of 36,000 PSI and excellent weldability. Its medium size is ideal for general structural framing, equipment bases, bracing, and heavy-duty shelving supports. In stock Los Angeles. Learn More

A36 Hot Rolled Steel Angle measuring 2-1/2" x 2-1/2" legs with a 3/16" thickness. This structural angle conforms to ASTM A36 standards and provides a minimum yield strength of 36,000 PSI. Its excellent weldability and durability make it ideal for structural framing, equipment bases, bracing, and general fabrication projects. In stock and available for custom cutting and same-day pickup in Los Angeles. Learn More

A36 Hot Rolled Steel Angle with 2-1/2" x 2-1/2" legs and 1/4" thickness. Conforming to ASTM A36, this structural angle provides a minimum yield strength of 36,000 PSI. Its excellent weldability and durability make it a primary choice for structural framing, equipment bases, bracing, and general fabrication projects. This medium profile offers robust support for various load-bearing applications. In stock for same-day Los Angeles pickup. Learn More

A36 Hot Rolled Steel Angle, measuring 2-1/2" x 2-1/2" legs with a 3/8" thickness. This structural angle conforms to ASTM A36 standards and provides a minimum yield strength of 36,000 PSI. Its excellent weldability and strength make it ideal for medium-duty structural framing, equipment bases, shelving, and general fabrication projects. In stock and available for same-day pickup in Los Angeles. Learn More

3" x 3" x 3/8" Hot Rolled Steel Angle, sold in 240-inch lengths. Conforms to ASTM A36 with a minimum yield strength of 36,000 PSI. This structural angle provides excellent weldability and good machinability. Its medium size is ideal for equipment bases, structural framing, and heavy-duty shelving supports. In stock for Los Angeles pickup. Learn More

A36 Hot Rolled Steel Angle measuring 4" x 3" legs with 1/4" thickness, in a 20-foot length. This structural angle conforms to ASTM A36 standards, offering a minimum yield strength of 36,000 PSI and excellent weldability. Its large size provides substantial rigidity, making it ideal for heavy structural frames, industrial equipment bases, and support bracing in construction projects. In stock for Los Angeles pickup. Learn More

A36 Hot Rolled Steel Angle measuring 6 inches by 4 inches with a 3/8 inch thickness. This structural angle conforms to ASTM A36 standards and offers a minimum yield strength of 36,000 PSI. Its large dimensions make it ideal for heavy structural framing, building supports, and industrial equipment manufacturing. Excellent weldability allows for easy fabrication. In stock and available for same-day pickup in Los Angeles. Learn More

A36 Hot Rolled Steel Angle measuring 1-1/2" x 1-1/2" with a 1/8" thickness, supplied in 20-foot lengths. This structural angle conforms to ASTM A36 standards and offers a minimum yield strength of 36,000 PSI with excellent weldability. Its medium size is ideal for structural framing, equipment bases, and general fabrication projects requiring robust support. In stock and ready for same-day pickup in Los Angeles. Learn More

A36 Hot Rolled Steel Angle measuring 1-1/2" x 1-1/2" with a 1/4" thickness, in a 20-foot (240") length. This general-purpose structural steel conforms to ASTM A36, offering a minimum yield strength of 36,000 PSI and excellent weldability. Its medium size is ideal for structural framing, equipment manufacturing, and industrial shelving where reliable strength is required. In stock for Los Angeles pickup. Learn More

A36 Hot Rolled Steel Angle, measuring 1-3/4" x 1-3/4" with a 1/8" thickness. This structural angle conforms to ASTM A36 specifications and provides a minimum yield strength of 36,000 PSI. Its excellent weldability and formability make it ideal for manufacturing equipment frames, structural bracing, support brackets, and general fabrication projects. In stock and ready for same-day pickup in Los Angeles. Learn More

A36 Hot Rolled Steel Angle measuring 1-3/4" x 1-3/4" with a 3/16" thickness. This structural angle conforms to ASTM A36 standards and offers a minimum yield strength of 36,000 PSI and excellent weldability. The hot-rolled process results in a scaled finish. Its medium size is ideal for structural framing, equipment bases, bracing, and general fabrication projects requiring robust, easy-to-weld steel. In stock in Los Angeles. Learn More

2" x 2" x 3/16" A36 Hot Rolled Steel Angle in 20-foot lengths. Conforming to ASTM A36, this structural angle provides a minimum 36,000 PSI yield strength and excellent weldability for fabrication. Its versatile medium size is ideal for structural framing, equipment bases, industrial shelving, and general repairs. In stock and available for same-day pickup in Los Angeles. Learn More

A36 Hot Rolled Steel Angle measuring 2" x 2" with a 1/4" thickness, in a 240" length. This structural angle conforms to ASTM A36 and offers a minimum yield strength of 36,000 PSI, excellent weldability, and good formability. Its medium size is ideal for structural framing, equipment bases, shelving, and general fabrication projects. In stock for same-day Los Angeles pickup. Learn More

A36 Hot Rolled Steel Angle measuring 3" x 2" legs with 1/4" thickness, in a 240" (20 ft) length. This structural angle conforms to ASTM A36 specifications and offers a minimum yield strength of 36,000 PSI. Its excellent weldability and strength make it ideal for structural framing, equipment bases, and general fabrication projects. In stock for same-day Los Angeles pickup. Learn More

Grade 60 #5 (5/8" diameter) Hot Rolled Rebar, supplied in a 20-foot length. This steel bar meets ASTM A615 specifications with a minimum yield strength of 60,000 PSI and a tensile strength of 90,000 PSI. Its deformed surface creates a strong mechanical bond with concrete, making it the industry standard for reinforcing foundations, slabs, and retaining walls. In stock for Los Angeles pickup. Learn More

This industrial-grade 0.8mm (.030") flux core welding wire is engineered for high-performance fabrication and repair. Meeting AWS/ASME certification standards, it provides a stable arc and excellent bead appearance for general-purpose steel welding. Packaged in a convenient 11 lbs (1kg) spool. Learn More

This ½” x 3” Hex Lag Screw is manufactured from low-carbon steel for reliable performance in general construction and framing. It meets ASTM A307 specifications, providing a minimum tensile strength of 60,000 psi. The zinc-plated finish offers moderate corrosion resistance. Learn More

This 1/2" x 3" Hex Lag Screw features a zinc-plated finish for moderate corrosion resistance. Manufactured from low carbon steel to meet ASTM A307 standards, it provides reliable holding power for wood construction and framing applications. Learn More

Our industrial-grade, oil-based white primer is an alkyd formulation designed for superior adhesion on metal surfaces. It provides an excellent foundation for topcoats, ensuring long-lasting corrosion protection for fabrication and MRO projects. Ideal for direct-to-metal (DTM) surface preparation. Learn More

Industrial Coating 218 is a high-performance alkyd and epoxy formulation designed for direct-to-metal (DTM) applications. This corrosion-resistant coating provides a durable finish for industrial MRO and fabrication projects, meeting key performance benchmarks. Learn More

Industrial Coating 227 is a professional-grade, direct-to-metal (DTM) alkyd paint designed for maximum adhesion and durability. This corrosion-resistant coating meets MIL-SPEC performance criteria and is ideal for protecting steel and iron surfaces in demanding industrial environments. Learn More

The 1/8" Cobalt Drill Bit is engineered from M35 steel with 5% cobalt for superior heat resistance when drilling hard metals. Featuring a 135° split-point geometry for precision, it is ideal for stainless steel and cast iron applications compliant with ANSI/ASME B94.11M standards. Learn More

This 5/16” x 2” Hex Lag Screw is a heavy-duty fastener for wood applications. Made from low carbon steel and zinc-plated for corrosion resistance, it meets ASTM A307 specifications for strength and reliability. The hex head allows for high-torque installation. Learn More

This 5/16” x 3” Hex Lag Screw is a heavy-duty fastener manufactured from low carbon steel to meet ASTM A307 specifications. The zinc plating provides essential corrosion resistance, making it ideal for structural wood-to-wood and wood-to-masonry applications. Learn More

This 5/16" x 4" Hex Lag Screw is manufactured from durable low carbon steel to meet ASTM A307 performance standards. It features a corrosion-resistant zinc plating (per ASTM B633), making it ideal for construction and general framing applications. Learn More

This 1/4" x 2" Hex Lag Screw features a protective zinc plating per ASTM B633. Manufactured from low carbon steel, it meets ASTM A307 specifications, providing reliable holding power and a minimum tensile strength of 60,000 psi for wood construction applications. Learn More

This 1/4" x 2-1/2" Hex Lag Screw is manufactured from low carbon steel, conforming to ASTM A307 strength standards. The zinc-plated finish (ASTM B633) provides essential corrosion resistance, making it ideal for wood construction and framing applications. Learn More