Search results for: '244 5'

Our 5" (5/8) J-Bolt Adjustable Barrel Hinges are engineered from heavy-duty, weldable low carbon steel for superior strength and durability. Designed for high-load applications, these hinges provide smooth, reliable operation for heavy gates and doors. The adjustable J-bolt allows for precise alignment during installation. Learn More

This 5" x 5" Heavy Duty Square Steel Base Plate is engineered from high-strength carbon steel for maximum durability. It comes pre-drilled for secure anchoring in structural and fabrication applications. Designed for compatibility with common industrial fastening systems like ASTM A307. Learn More

This 5-inch tube ring is crafted from high-quality Class 25-30 gray cast iron, providing excellent durability for ornamental and architectural applications. Designed for seamless integration with standard tubing for fences, gates, and handrails. Learn More

Our 5-inch barrel hinges are engineered from high-strength carbon steel for maximum durability and load capacity. Designed for weld-on applications, these hinges provide a robust pivot point for heavy gates, doors, and industrial equipment. They feature a grease zerk fitting for easy maintenance and extended service life. Learn More

Durable 5/8 Inch Square Plastic Caps designed for a secure, press-fit on square tubing. Made from industrial-grade, weather-resistant plastic, these caps provide a clean, finished appearance while protecting against dirt, moisture, and sharp edges. Ideal for fencing, furniture, and equipment fabrication. Learn More

Our 5-inch barrel hinges are constructed from high-strength, weldable steel for maximum durability. Engineered for heavy-duty gates and doors, these hinges provide a smooth, reliable pivot point for industrial fabrication and MRO projects. The plateless design allows for direct welding to steel surfaces. Learn More

This 5/8" x 5" Heavy-Duty Wedge Anchor is engineered for reliable fastening in solid concrete. Manufactured from high-strength carbon steel and finished with a CR3+ zinc plating for enhanced corrosion resistance, it provides superior holding power for structural and MRO applications. Includes nut and washer for immediate installation. Learn More

This 5” x 1/4” grinding disc is engineered for high-performance metal removal. Made from durable aluminum oxide with fiberglass reinforcement, it meets ANSI B7.1 safety standards and is rated for a maximum speed of 12,200 RPM. Learn More

This 5/16" x 2" one-way screw is a tamper-resistant fastener made from industrial-grade low carbon steel with a protective black finish. Designed for security applications based on ASTM A307 material standards where removal prevention is critical. Learn More

This 5/16" x 3" one-way screw is engineered for permanent, tamper-resistant applications. Manufactured from industrial-grade steel with a protective black finish, its unique drive system prevents removal once installed. Conforms to common ANSI/ASME dimensional standards. Learn More

This 5/16" x 4" One Way Screw is crafted from industrial-grade steel for reliable, tamper-resistant fastening. Its unique head design, conforming to general industrial standards, allows for installation with a standard screwdriver but prevents removal. Ideal for security applications where permanent or semi-permanent assembly is required. Learn More

This 5” x .040” cut-off wheel is engineered for high-speed cutting of metal. It is an ANSI B7.1 compliant abrasive wheel featuring durable fiberglass reinforcement for safety and performance. Rated for a maximum of 12,200 RPM, it delivers precise, clean cuts in fabrication and MRO applications. Learn More

A36 Hot Rolled Steel Angle measuring 5" x 5" with a 5/16" thickness. This structural angle conforms to ASTM A36 specifications, providing a minimum yield strength of 36,000 PSI and excellent weldability. Its large size makes it ideal for heavy structural applications, including building frames, equipment bases, and industrial supports. In stock and available for same-day pickup in Los Angeles. Learn More

Learn More

This 5/16” x 3” Hex Lag Screw is a heavy-duty fastener manufactured from low carbon steel to meet ASTM A307 specifications. The zinc plating provides essential corrosion resistance, making it ideal for structural wood-to-wood and wood-to-masonry applications. Learn More

This 5/16” x 2” Hex Lag Screw is a heavy-duty fastener for wood applications. Made from low carbon steel and zinc-plated for corrosion resistance, it meets ASTM A307 specifications for strength and reliability. The hex head allows for high-torque installation. Learn More

This 5/16" x 1" Hex Lag Screw is a heavy-duty fastener made from low carbon steel, meeting ASTM A307 standards. With a minimum tensile strength of 60,000 psi and a corrosion-resistant zinc plating, it ensures strong, reliable connections in wood framing and construction applications. Learn More

This 5/16" x 4" Hex Lag Screw is manufactured from durable low carbon steel to meet ASTM A307 performance standards. It features a corrosion-resistant zinc plating (per ASTM B633), making it ideal for construction and general framing applications. Learn More

5" x 5" x 3/8" A36 Hot Rolled Steel Angle, sold in a 240" (20 ft) length. This structural angle conforms to ASTM A36 and provides a minimum yield strength of 36,000 PSI. Its large dimensions make it ideal for heavy structural applications, including building frames and industrial supports. A36 steel offers excellent weldability and fabrication characteristics. In stock for same-day Los Angeles pickup. Learn More

5/8" x 5/8" 6061-T6 Aluminum Square Bar, sold in 144" lengths. Conforms to ASTM B211, offering a high strength-to-weight ratio with 40,000 PSI yield strength. Known for excellent machinability, weldability, and corrosion resistance, it's ideal for structural frames, support brackets, and precision machined parts. In stock for immediate cutting and pickup in Los Angeles. Learn More

This industrial-grade 5/16" x 4-1/2" masonry drill bit is engineered for high-performance drilling in concrete, brick, and block. It features a durable tungsten carbide tip for extended life and precision, manufactured to meet ANSI B212.15 standards. Learn More

The 1/2" x 5" Power Bull Anchor is a heavy-duty carbon steel fastener designed for anchoring into concrete. Featuring a zinc-plated finish per ASTM B633 for corrosion resistance, it provides reliable holding power for structural and MRO applications. Includes nut and washer for complete installation. Learn More

5/8" diameter 6061-T6 Aluminum Round Bar, 144" length. Conforming to ASTM B211, this bar provides 45,000 PSI tensile strength, good machinability, and excellent corrosion resistance. The versatile medium diameter is ideal for creating shafts, axles, spacers, and custom machined components for automotive, marine, and structural applications. In stock for Los Angeles pickup. Learn More

5/8" Hot Rolled Steel Square Bar, available in 20-foot lengths. This A36 grade carbon steel conforms to ASTM A36 and offers 36,000 PSI yield strength with excellent weldability. The hot rolling process gives it a scaly mill finish. Its medium size is ideal for structural frames, equipment supports, trailer components, and general fabrication projects. In stock for Los Angeles pickup. Learn More

5/16" x 5/16" 304 Stainless Steel Square Bar, available in 144" lengths. Certified to ASTM A276, this bar provides a tensile strength of 73,200 PSI with excellent weldability and corrosion resistance. Its small profile is ideal for light structural supports, braces, frames, and decorative architectural work. This versatile, non-magnetic bar is ready for fabrication. In stock for Los Angeles pickup. Learn More

5/8" x 5/8" Type 304 Stainless Steel Square Bar in 144" lengths. This versatile bar conforms to ASTM A276 and has a tensile strength of 73,200 PSI. Known for its excellent corrosion resistance and weldability, it's a go-to material for general fabrication. Its medium size is ideal for structural bracing, equipment frames, shafts, and supports. In stock for same-day pickup in Los Angeles. Learn More

5/16" Cold Rolled 1018 Hexagon Bar, 144" length. Meets ASTM A108 specifications. This low-carbon steel bar offers 63,800 PSI tensile strength, a smooth surface finish, and tight dimensional tolerances from the cold drawing process. Its excellent machinability and good weldability make it suitable for producing fasteners, shafts, hydraulic fittings, and other precision machined components. In stock for same-day Los Angeles pickup. Learn More

5/8 inch 1018 Cold Rolled Hexagon Bar, 144" length. Conforms to ASTM A108 with 63,800 PSI tensile strength. The cold drawing process provides a smooth surface, tight dimensional accuracy, and excellent machinability. This medium-sized bar is ideal for manufacturing nuts, standoffs, hydraulic fittings, and machinery shafts. In stock for Los Angeles pickup. Learn More

5/8" x 5/8" 1018 Cold Rolled Square Bar in 144" lengths. Produced to ASTM A108 standards, this bar offers a tensile strength of 63,800 PSI, excellent machinability, and a superior surface finish. Its tight dimensional tolerances make it ideal for shafts, fixtures, and precision machined components requiring minimal prep work. In stock for same-day Los Angeles pickup. Learn More

5/8" x 48" x 120" A36 Hot Rolled Steel Plate, compliant with ASTM A36 standards. This material features a minimum yield strength of 36,000 PSI and excellent weldability, making it a reliable choice for structural applications. The large 5/8" thickness is ideal for heavy-duty uses like machinery base plates, gussets, and structural supports where durability is critical. In stock Los Angeles. Learn More

5 inch Nominal Pipe Size (NPS) Galvanized Steel Pipe with a Schedule 40 wall thickness (0.258"), available in 21 ft lengths. Conforms to ASTM A53 Grade B with 60,000 PSI tensile strength. The hot-dip zinc coating provides superior corrosion resistance for outdoor and high-moisture use. This large diameter pipe is ideal for structural columns, main water lines, and industrial process piping. In stock for Los Angeles pickup. Learn More

Grade 60 #5 (5/8" diameter) Hot Rolled Rebar, supplied in a 20-foot length. This steel bar meets ASTM A615 specifications with a minimum yield strength of 60,000 PSI and a tensile strength of 90,000 PSI. Its deformed surface creates a strong mechanical bond with concrete, making it the industry standard for reinforcing foundations, slabs, and retaining walls. In stock for Los Angeles pickup. Learn More

This Small Slide Bolt features a durable 1/2" diameter steel shaft for reliable latching. Manufactured from industrial-grade low-carbon steel similar to ASTM A307 material, it provides a simple and effective security solution for light-duty doors and gates. Its robust construction ensures long-lasting performance in MRO and fabrication applications. Learn More

5" x 5" Hot Rolled Steel Square Tube with a 0.188" wall, 240" length. Conforms to ASTM A500 Grade B, offering a minimum yield strength of 46,000 PSI and excellent weldability. This large-format hollow structural section (HSS) is ideal for heavy structural frames, industrial supports, columns, and equipment bases. In stock for same-day Los Angeles pickup. Learn More

5" x 5" x 0.250" wall Hot Rolled Steel Square Tube manufactured to ASTM A500 Grade B specifications. This structural tubing features a minimum yield strength of 46,000 PSI and excellent weldability. Its large profile provides a superior strength-to-weight ratio for structural columns, building frames, heavy equipment bases, and industrial supports. In stock for Los Angeles pickup. Learn More

This large industrial slide bolt features a robust 3/4" diameter steel shaft and durable black finish. Engineered for reliable security on heavy-duty gates, doors, and enclosures. Ideal for fabrication and MRO applications. Learn More

5/16 inch diameter 304 Stainless Steel Round Bar, 144" length. Conforms to ASTM A276 and delivers 73,200 PSI tensile strength. This versatile grade combines excellent corrosion resistance with superior weldability and good formability. Its small diameter is ideal for creating precision pins, dowels, fastener blanks, and small shafts. In stock for same-day Los Angeles pickup. Learn More

5/8" diameter 304 Stainless Steel Round Bar, sold in 144" lengths. Certified to ASTM A276, this versatile austenitic steel features 73,200 PSI tensile strength, excellent corrosion resistance, and superior weldability. Its medium diameter is ideal for general-purpose shafts, axles, bushings, and architectural applications requiring strength and durability. In stock for Los Angeles pickup. Learn More

5/16 inch diameter 1018 Cold Rolled Round Bar, sold in 144-inch lengths. Conforms to ASTM A108 specifications, offering 63,800 PSI tensile strength, tight dimensional tolerances, and excellent machinability. Its smooth, scale-free surface is ideal for precision parts like pins, dowels, small shafts, and fastener blanks. In stock for same-day Los Angeles pickup. Learn More

5/8" diameter 1018 Cold Rolled Steel Round Bar, 144" length. This bar conforms to ASTM A108 and offers 63,800 PSI tensile strength, superior dimensional tolerance, and a smooth, scale-free surface. Its excellent machinability and good weldability make it a versatile choice for shafts, axles, pins, and custom machined components. In stock for same-day Los Angeles pickup. Learn More

5/8" diameter A36 Hot Rolled Steel Round Bar in a 240" length. Conforming to ASTM A36, this bar provides 58,000-80,000 PSI tensile strength with excellent weldability and formability. Its versatile size is ideal for medium-duty applications including shafts, axles, and structural supports where a precise finish is not required. In stock for immediate Los Angeles pickup. Learn More

5/8" x 16 gauge A500B Galvanized Steel Square Tube, 24 ft length. Conforms to ASTM A500 with 58,000 PSI tensile strength. The hot-dip zinc coating provides excellent corrosion resistance for outdoor applications. This small profile is ideal for light structural frames, gates, railings, and agricultural uses. In stock for Los Angeles pickup. Learn More

5/8" x 5/8" Hot Rolled Steel Square Tube with a 0.065" wall thickness, supplied in 20-foot lengths. Conforming to ASTM A500 Grade B, this structural tubing offers a minimum yield strength of 46,000 PSI and excellent weldability. Its small profile is ideal for lightweight frames, supports, brackets, and general fabrication projects where strength and economy are key. In stock for same-day Los Angeles pickup. Learn More

5/8" diameter Cold Rolled All Thread Rod in a 10 ft length, featuring a zinc-plated finish for corrosion resistance. Made from low-carbon steel that meets the strength requirements of ASTM A307 Grade A. Offers good weldability and strength for general-purpose fastening, bracing, and support applications in construction and manufacturing. In stock for immediate Los Angeles pickup. Learn More

5" Nominal Pipe Size (NPS) Hot Rolled Black Pipe with a Schedule 40 wall. This A53 Grade B steel pipe offers a minimum tensile strength of 60,000 PSI and excellent weldability. Its large diameter and robust wall thickness make it ideal for high-flow fluid transfer, main water lines, industrial process piping, and heavy-duty structural columns. In stock for Los Angeles pickup. Learn More

5" x 10 lbs/ft Hot Rolled Steel Standard I-Beam, 20 ft length. Conforms to ASTM A36, providing a minimum yield strength of 36,000 PSI and excellent weldability for easy fabrication. Its dimensions (5" Height x 3" Flange) make it a robust choice for structural framing, machinery bases, and support girders. In stock for same-day Los Angeles pickup. Learn More

2" x 5/8" 6061-T6 Aluminum Flat Bar, 144" length. Conforms to ASTM B211 with 45,000 PSI tensile strength, excellent machinability, and superior corrosion resistance. This versatile, medium-width bar is ideal for structural bracing, machine ways, base plates, and custom fabricated parts. Its high strength-to-weight ratio makes it a top choice for manufacturing and structural projects. In stock for Los Angeles pickup. Learn More

This 3" x 5/8" 6061-T6 Aluminum Flat Bar offers an excellent combination of strength, workability, and corrosion resistance. Conforming to ASTM B211 with a tensile strength of 45,000 PSI, this material is easily machined, welded, and finished. Its medium size is ideal for structural bracing, machine ways, wear strips, and mounting plates where a high strength-to-weight ratio is required. In stock for immediate Los Angeles pickup. Learn More

5" x 1" A36 Hot Rolled Steel Flat Bar, sold in 240" (20-foot) lengths. This structural steel conforms to ASTM A36, offering a minimum yield strength of 36,000 PSI and excellent weldability. Its substantial cross-section makes it ideal for manufacturing heavy-duty base plates, structural supports, trailer frames, and die components where strength and rigidity are critical. In stock and available for same-day pickup in Los Angeles. Learn More

5/8" OD x 0.065" wall Hot Rolled Steel Round Tube. Conforms to ASTM A500 Grade B with 58,000 PSI tensile strength and excellent weldability. This small-diameter tubing is a cost-effective choice for general fabrication, furniture frames, machinery guards, and light structural supports. Its strength and formability make it ideal for projects where a precise surface finish is not critical. In stock for Los Angeles pickup. Learn More

A 5/8" x 1/8" 6061-T6 Aluminum Flat Bar in a 144" length. This product conforms to ASTM B211 standards, offering a versatile combination of high strength (45,000 PSI tensile), excellent corrosion resistance, and good machinability. Its small cross-section is ideal for manufacturing lightweight brackets, mounting straps, shims, and custom fabrication projects. In stock for Los Angeles pickup. Learn More

5" x 1/8" 1018 Cold Rolled Flat Bar, 144" length. Conforming to ASTM A108, this low-carbon steel offers a smooth, scale-free finish and tight dimensional tolerances. It has a tensile strength of 63,800 PSI and excellent machinability. The wide 5-inch profile is ideal for base plates, heavy structural bracing, and die components. In stock for Los Angeles pickup. Learn More

3" x 5/8" 1018 Cold Rolled Steel Flat Bar, 144" length. Conforms to ASTM A108 with 63,800 PSI tensile strength, excellent machinability, and superior dimensional tolerances. Its smooth, scale-free surface is ideal for painting or plating. This medium-width bar is used for structural bracing, machine ways, and base plates. In stock for same-day Los Angeles pickup. Learn More

A36 Hot Rolled Steel Flat Bar measuring 5 inches wide by 1/8 inch thick. Conforming to ASTM A36, this structural steel bar offers 36,000 PSI minimum yield strength and excellent weldability. Its large width makes it ideal for manufacturing base plates, heavy structural supports, trailer frames, and die components. This versatile, low-cost material is easily fabricated. In stock for same-day Los Angeles pickup. Learn More

5 Inch by 3/16 Inch Hot Rolled Steel Flat Bar, 240-inch length. Conforming to ASTM A36, this bar provides a minimum yield strength of 36,000 PSI and excellent weldability for general fabrication. The large 5-inch width is ideal for creating structural base plates, heavy equipment mounting, trailer frames, and die components where strength and rigidity are essential. In stock Los Angeles. Learn More

5" x 1/4" Hot Rolled A36 Steel Flat Bar, sold in 240" lengths. Conforms to ASTM A36 with a minimum yield strength of 36,000 PSI and excellent weldability. This large-format flat bar is ideal for heavy structural applications, including base plates for machinery and columns, support braces, and frame components where strength and durability are critical. In stock for same-day Los Angeles pickup. Learn More

A36 Hot Rolled Steel Flat Bar measuring 1 inch wide by 5/16 inch thick, in a 240-inch (20 ft) length. This structural steel bar conforms to ASTM A36 specifications and offers a minimum yield strength of 36,000 PSI. Its excellent weldability and good machinability make it ideal for structural bracing, machine ways, and general fabrication projects. In stock for same-day Los Angeles pickup. Learn More

5" x 3/8" A36 Hot Rolled Steel Flat Bar. This structural steel conforms to ASTM A36, providing a minimum yield strength of 36,000 PSI and excellent weldability for easy fabrication. The large 5-inch width makes it a robust choice for heavy structural components, equipment bases, die components, and machinery mounting plates. In stock and available for custom cutting and same-day Los Angeles pickup. Learn More

5" x 1/2" Hot Rolled A36 Steel Flat Bar, supplied in 240-inch (20-foot) lengths. This structural steel bar conforms to ASTM A36 and offers a minimum yield strength of 36,000 PSI with excellent weldability and formability. Its large cross-section is ideal for manufacturing heavy-duty base plates, structural supports, trailer frames, and other general fabrication projects requiring robust strength. In stock for immediate Los Angeles pickup. Learn More

3" x 5/8" Hot Rolled Steel Flat Bar, 240" length. Conforms to ASTM A36 with a minimum yield strength of 36,000 PSI and excellent weldability. This versatile structural steel bar is ideal for general fabrication, structural bracing, support straps, and base plates. Its medium width provides a solid foundation for equipment and machinery. In stock for same-day Los Angeles pickup. Learn More

4" x 5/8" A36 Hot Rolled Steel Flat Bar. Conforms to ASTM A36 with 36,000 PSI minimum yield strength. Features excellent weldability and good machinability. The hot-rolled process results in a scaly finish and slightly rounded edges. This large width is ideal for structural base plates, heavy equipment supports, trailer frames, and general fabrication projects. In stock for immediate Los Angeles pickup. Learn More

1-1/2" x 5/8" 6061-T6 Aluminum Flat Bar, 144" length. Conforms to ASTM B211 with 45,000 PSI tensile strength, excellent weldability, and corrosion resistance. This versatile, medium-width bar is ideal for structural bracing, machine ways, mounting plates, and general fabrication. Its high strength-to-weight ratio makes it a top choice for projects requiring robust yet lightweight components. In stock for same-day Los Angeles pickup. Learn More

1/4" x 5/8" 1018 Cold Rolled Steel Flat Bar, 144" length. Conforms to ASTM A108 with a tensile strength of 63,800 PSI and excellent machinability. The cold drawing process provides a smooth, scale-free surface and tight dimensional tolerances. This small-width bar is ideal for brackets, straps, shims, and precision-machined components. In stock for immediate Los Angeles pickup. Learn More

3/4" x 5/16" 1018 Cold Rolled Steel Flat Bar, 144" length. Conforms to ASTM A108, providing 63,800 PSI tensile strength, a smooth surface finish, and tight dimensional tolerances. This grade offers good machinability and weldability. Its small profile is ideal for manufacturing precision brackets, straps, shims, and small frame components. In stock for Los Angeles pickup. Learn More

A36 Hot Rolled Steel Flat Bar measuring 5/8" wide by 1/4" thick in 240" lengths. Conforming to ASTM A36, this structural steel offers a minimum yield strength of 36,000 PSI and excellent weldability. The small cross-section is ideal for general fabrication, including making support brackets, straps, shims, and small frame stock. In stock for immediate pickup in Los Angeles. Learn More

5" x 2" Hot Rolled Steel Rectangular Tube with a 0.120" wall, 240" length. This structural tube conforms to ASTM A500 Grade B, providing 58,000 PSI tensile strength and excellent weldability. The large rectangular profile offers superior resistance to bending and torsion, making it ideal for trailer frames, building supports, and heavy equipment bases. In stock for immediate Los Angeles pickup. Learn More

5" x 2" Hot Rolled Steel Rectangular Tube with a 0.180" wall thickness, in 20-foot lengths. Manufactured to ASTM A500 Grade B specifications, this structural tubing provides a minimum yield strength of 46,000 PSI and excellent weldability. Its large profile offers superior strength and rigidity, making it ideal for trailer frames, heavy equipment bases, and structural supports. In stock for immediate Los Angeles pickup. Learn More

5" x 3" x 1/4" Hot Rolled Steel Angle, 240" length. This A36 structural angle meets ASTM A36 specifications and provides a minimum yield strength of 36,000 PSI. Its robust dimensions make it ideal for heavy structural applications, including building frames, equipment bases, and industrial supports. A36 steel offers excellent weldability and is a cost-effective choice for general fabrication. In stock for Los Angeles pickup. Learn More

A36 Hot Rolled Steel Angle with 5" and 3" legs, a 3/8" thickness, and 240" length. This unequal leg angle conforms to ASTM A36, providing a minimum 36,000 PSI yield strength and excellent weldability. The large profile is ideal for heavy-duty structural applications, including building frames, equipment bases, and industrial supports. In stock and ready for same-day pickup in Los Angeles. Learn More

A36 Hot Rolled Steel Angle measuring 5" x 3" legs with a 1/2" thickness, supplied in a 240" (20 ft) length. This structural angle meets ASTM A36 standards, offering a minimum yield strength of 36,000 PSI and excellent weldability. Its large dimensions provide substantial load-bearing capacity for heavy structural framing, equipment bases, and industrial supports. In stock Los Angeles. Learn More

A36 Hot Rolled Steel Angle measuring 6" x 4" with a 5/16" thickness. This structural angle conforms to ASTM A36 standards and offers a minimum yield strength of 36,000 PSI with excellent weldability. The large profile is ideal for heavy structural applications, including building frames, industrial supports, and equipment manufacturing. Its strength and versatility make it a reliable choice for fabrication projects. In stock Los Angeles. Learn More

A36 Hot Rolled Steel Angle with 6" x 6" legs, 5/16" thickness, and a 240" length. Conforming to ASTM A36, this structural angle provides a minimum yield strength of 36,000 PSI and excellent weldability for demanding applications. Its large profile makes it ideal for heavy structural frames, building columns, equipment bases, and industrial supports. In stock for immediate Los Angeles pickup. Learn More

5-inch Nominal Pipe Size (NPS) 304 Stainless Steel Pipe, Schedule 10 wall, in 240-inch lengths. Conforming to ASTM A312, this pipe provides excellent corrosion resistance and weldability. With a tensile strength of 73,200 PSI, it is ideal for large-scale fluid transport, industrial process lines, and structural applications requiring strength and longevity. In stock for Los Angeles pickup. Learn More

5" x 1/4" 304 Stainless Steel Flat Bar, 144" length. Conforms to ASTM A276 with 73,200 PSI tensile strength, excellent weldability, and superior corrosion resistance. This versatile austenitic stainless grade is non-magnetic in the annealed condition. Its large profile is ideal for heavy structural supports, base plates, gussets, and food processing equipment framework. In stock for Los Angeles pickup. Learn More

1-5/8" OD x 0.065" wall Type 304 Stainless Steel Round Tube, 20-foot length, with a 180 grit polished finish. This versatile austenitic stainless steel meets ASTM A269 standards and offers 73,200 PSI tensile strength, excellent corrosion resistance, and superior weldability. Its medium diameter is ideal for architectural handrails, food processing equipment frames, and marine hardware. In stock for immediate Los Angeles pickup. Learn More

Morse Metal Devil NXT

• 7-1/4" x 5/8"
• 5800 RPM
• 48 Teeth Metal
• Carbide Tipped Circular Saw Blade

Learn More

The 1/4" Cobalt Drill Bit is engineered from M35 steel with 5% cobalt for exceptional heat resistance up to 1100°F. Its 135° split-point geometry ensures precise, walk-free starts and efficient drilling in hard materials like stainless steel and cast iron. Learn More

The 1/8" Cobalt Drill Bit is engineered from M35 steel with 5% cobalt for superior heat resistance when drilling hard metals. Featuring a 135° split-point geometry for precision, it is ideal for stainless steel and cast iron applications compliant with ANSI/ASME B94.11M standards. Learn More

This 1/4" x 4-1/4" Cobalt Industrial Drill Bit is engineered from M35 steel with 5% cobalt for superior heat resistance. Conforming to ANSI/ASME B94.11M standards, its 135° split-point tip ensures precise starts and is ideal for drilling into stainless steel and cast iron. Learn More

This 3/16" x 4-1/4" industrial cobalt drill bit is engineered from M35 steel (5% cobalt) for superior heat resistance. Its 135° split-point tip ensures precise, no-walk starts on hard materials like stainless steel and cast iron. Manufactured to meet industrial performance standards for durability and accuracy. Learn More

This industrial-grade construction adhesive provides a high-strength bond for a wide range of materials. Compliant with ASTM C557 standards, it is engineered for reliability in demanding construction, fabrication, and MRO applications. Learn More

Our 1/2 inch Cobalt Drill Bit is engineered from M35 steel with 5% cobalt for superior heat resistance up to 1100°F. Featuring a 135° split-point geometry compliant with ANSI standards, this bit is designed for high-performance drilling in hard materials like stainless steel and cast iron. Learn More

This 4-1/2" x .040" x 7/8" cut-off wheel is an industrial-grade abrasive engineered for high-speed cutting. It is ANSI B7.1 compliant and features fiberglass reinforcement for enhanced safety and durability during metal fabrication and MRO tasks. Learn More

This industrial-grade Safety Yellow DTM (Direct-to-Metal) paint provides exceptional corrosion protection in a single coat. Formulated as a high-performance alkyd coating, it's engineered for durability on steel and other metal surfaces. Ideal for MRO and new fabrication projects. Learn More

Engineered for strength and durability, these 5x5 Heavy Duty Weldable Butt Hinges are essential for industrial gates, doors, and custom fabrication. Made from high-quality, weldable low-carbon steel, they provide a secure and permanent pivot point. Ideal for heavy-duty applications requiring robust performance. Learn More

Our industrial-grade, oil-based white primer is an alkyd formulation designed for superior adhesion on metal surfaces. It provides an excellent foundation for topcoats, ensuring long-lasting corrosion protection for fabrication and MRO projects. Ideal for direct-to-metal (DTM) surface preparation. Learn More

This 1-1/2" x 1-1/2" x 36" corner guard is fabricated from 16 gauge galvanized steel for excellent durability and impact resistance. The G90 zinc coating provides superior corrosion protection, making it ideal for industrial and commercial environments. Perfect for protecting walls, columns, and equipment. Learn More

A 16 gauge galvanized steel corner guard providing robust impact and abrasion resistance for walls and edges. Manufactured to meet ASTM A653 standards for corrosion protection, this 2-1/2" x 2-1/2" x 36" guard is ideal for high-traffic commercial and industrial environments. The G90 galvanized finish ensures long-lasting durability. Learn More

A versatile, industrial-grade lacquer thinner for reducing paint viscosity and cleaning metal surfaces. This fast-evaporating solvent ensures optimal paint flow and prepares substrates for DTM coatings. Ideal for use with alkyd and oil-based industrial paints. Learn More

A36 Hot Rolled Steel Channel, C5 x 6.7, measuring 5" in depth with a 0.190" web thickness. Conforms to ASTM A36 with a minimum yield strength of 36,000 PSI. This large structural channel offers excellent weldability and strength for equipment frames, vehicle chassis, and building supports. Stocked in 20-foot lengths for same-day pickup in Los Angeles. Learn More

Learn More

Learn More

Industrial-grade Acetone is a powerful, fast-evaporating solvent designed for cleaning and degreasing metal surfaces. It effectively removes oils, grease, and contaminants, ensuring optimal surface preparation for painting or welding. Conforms to industrial purity standards like ASTM D329. Learn More

Industrial Coating 218 is a high-performance alkyd and epoxy formulation designed for direct-to-metal (DTM) applications. This corrosion-resistant coating provides a durable finish for industrial MRO and fabrication projects, meeting key performance benchmarks. Learn More

The 2-Way Hand Riveter is an industrial-grade tool for reliable fastening in fabrication and MRO. Constructed from high-strength steel alloy, it provides the leverage needed for setting aluminum and steel rivets. Includes multiple nose pieces for versatility. Learn More

AWS A5.1 E6013 certified all-purpose welding rod for mild steel applications. This 3/32" diameter electrode provides a smooth, stable arc and easy slag removal, ideal for general fabrication and MRO. Designed for AC or DC operation in all positions. Learn More

This 1/8" 6013 All-Purpose Welding Rod is an AWS/ASME certified electrode designed for versatile performance. With a 60,000 psi tensile strength, its mild steel core and flux coating ensure a stable arc and easy slag removal, making it ideal for general fabrication and repair. Learn More

This industrial-grade Gloss White paint features advanced Direct-to-Metal (DTM) technology for superior single-coat application. Formulated as a durable alkyd coating, it provides excellent corrosion and weather resistance for demanding MRO and fabrication projects. Learn More

Our industrial-grade DTM Clear Coat is a high-performance alkyd coating designed for direct application on metal surfaces. It provides exceptional corrosion resistance and a durable, transparent finish ideal for MRO and fabrication projects. Learn More

Our Pacific Brown industrial-grade paint features advanced Direct-to-Metal (DTM) technology for superior corrosion protection. This durable alkyd coating is engineered for single-coat application on prepared metal surfaces, ideal for demanding MRO and fabrication projects. Learn More