Search results for: 'bobco+enabled'

Our 9-inch barrel hinges are engineered from high-strength, weldable steel for superior durability. Designed for heavy-duty industrial gates, doors, and security applications, these hinges provide smooth, reliable operation. The plateless design allows for direct, clean welding to frames and posts. Learn More

1-1/2 Single Lock Box Learn More

Learn More

1-1/4 Single Lock Box Learn More

The 1-1/2 Double Lock Box is an industrial-grade hardware component for fabricating secure gate and fence locking systems. Made from weldable steel, it provides a durable housing for standard lock mechanisms, making it ideal for ornamental and security applications. Learn More

Our 1-1/4 Double Lock Box is a durable gate hardware component crafted from high-strength Class 25-30 gray cast iron. Designed for 1-1/4" square tubing, it provides a secure housing for lock mechanisms in ornamental fences and security gates. Ideal for industrial fabrication and commercial applications. Learn More

This 4-inch V-Groove Wheel Box is an industrial-grade component designed for high-load capacity on sliding gates and doors. Constructed from heavy-duty steel, it ensures smooth, reliable operation on angle iron tracks. Ideal for fabrication and MRO applications. Learn More

This 9-inch door spring is engineered from high-tensile spring steel for reliable, long-lasting tension in commercial and industrial doors. Designed for high-cycle applications, it ensures consistent performance and durability for MRO and new installations. Learn More

Learn More

Learn More

Our 5" (5/8) J-Bolt Adjustable Barrel Hinges are engineered from heavy-duty, weldable low carbon steel for superior strength and durability. Designed for high-load applications, these hinges provide smooth, reliable operation for heavy gates and doors. The adjustable J-bolt allows for precise alignment during installation. Learn More

These 7" J-Bolt Adjustable Barrel Hinges are engineered from high-strength steel for maximum durability in heavy-duty applications. Designed for weld-on installation, they provide a smooth, reliable pivot for industrial gates and doors. The adjustable J-bolt allows for precise alignment and tensioning. Learn More

This high-quality 0.9mm (0.035") MIG welding wire is designed for superior performance in industrial applications. Certified to meet AWS/ASME standards, this steel alloy wire provides a stable arc and minimal spatter for clean, strong welds. Ideal for fabrication, automotive repair, and MRO projects. Learn More

This 3/4 Inch Square Plastic Cap is designed for a secure fit on square tubing, providing a clean finish and protection. Made from durable, weather-resistant LDPE plastic, it is ideal for finishing fences, railings, and furniture. It meets general industrial quality standards for non-structural applications. Learn More

Durable 5/8 Inch Square Plastic Caps designed for a secure, press-fit on square tubing. Made from industrial-grade, weather-resistant plastic, these caps provide a clean, finished appearance while protecting against dirt, moisture, and sharp edges. Ideal for fencing, furniture, and equipment fabrication. Learn More

This 1 Inch Square Plastic Cap provides a durable, finished look for square tubing. Made from UV-resistant LDPE plastic, it protects against moisture and debris. Ideal for fencing, furniture, and fabrication projects. Learn More

The 1-1/4 Inch Square Plastic Cap provides a clean, finished look for square tubing applications. Made from durable, weather-resistant black plastic, it protects against sharp edges and internal debris. This cap offers a secure press-fit for reliability in fencing, furniture, and equipment fabrication. Learn More

Durable 1-1/2 inch square plastic cap designed for a secure fit on square tubing. Made from high-quality, weather-resistant Low-Density Polyethylene (LDPE), this cap provides a clean, finished appearance and protects against debris. Learn More

Our 2 Inch Square Plastic Cap is an industrial-grade finishing component made from durable, low-density polyethylene (LDPE). It provides a secure, press-fit closure for square tubing, protecting against moisture and debris while offering a clean, professional appearance. Learn More

Our 12-inch industrial door spring is engineered from high-tensile spring steel for maximum durability and cycle life. Designed to meet ASTM A227/A228 performance standards, it provides reliable tension for heavy-duty commercial and industrial doors. Features a corrosion-resistant zinc-plated finish for long-lasting use. Learn More

Learn More

Learn More

This 6 Inch Solid V-Groove Wheel is engineered for high-capacity applications, supporting loads up to 2000 lbs. Manufactured from solid steel to industrial standards, it provides durable and reliable performance on angle iron tracks for gates and carts. Learn More

Learn More

The 1-1/2 Inch Post Ball Cap is a high-quality ornamental hardware component designed for fencing and architectural applications. Fabricated from durable Class 25-30 gray iron or A356 aluminum, it provides a classic, finished look to any metal post. This decorative cap is engineered for a precise fit on 1-1/2 inch square or round tubing. Learn More

This 2 Inch Post Ball Cap provides a durable, decorative finish for square or round tubing. Fabricated from Class 25-30 gray cast iron, it is designed for welding onto fences, gates, and handrails, offering a classic architectural look. Learn More

This 2-1/2 Inch Post Ball Cap is a high-quality ornamental component crafted from durable Class 25-30 gray iron. It provides a classic, protective finish for fence posts, gates, and handrails. Engineered for long-lasting performance in architectural and fabrication projects. Learn More

The 3 Inch Post Ball Cap is a durable, decorative finial for fence posts and railings. Manufactured from high-strength Class 25-30 gray iron, it provides a classic architectural finish and protects the post top from weather. Ideal for both new fabrication and MRO projects. Learn More

The 4 Inch Post Ball Cap is a decorative finial designed for fence posts and railings. Crafted from durable Class 25-30 gray iron, it provides a classic architectural finish for ornamental and security fencing projects. This cap is designed to fit standard 4-inch square or round posts. Learn More

Durable 2 Inch Post Newell Caps designed for finishing square tubing posts. Fabricated from high-grade Class 25-30 cast iron, these caps provide a protective, decorative finish for fences, gates, and railings. Ideal for architectural and ornamental metalwork. Learn More

Galvanized Slotted Angle is a versatile steel framing component ideal for constructing custom racks, shelves, and supports. Its galvanized finish provides excellent corrosion resistance, while the 16-gauge thickness ensures reliable performance for light to medium-duty MRO and fabrication projects. Learn More

Durable 16-gauge galvanized steel slotted angle with 1-1/4" legs for superior corrosion resistance. The pre-punched pattern allows for easy, bolt-together assembly in framing, shelving, and MRO applications. Ideal for creating custom racks and supports. Learn More

Durable 16 gauge galvanized steel slotted angle for versatile framing and support applications. Features a G90 galvanized coating for superior corrosion resistance. Ideal for industrial shelving, equipment bracing, and general MRO fabrication projects. Learn More

Galvanized Slotted Angle manufactured from durable 16 gauge steel for reliable performance in light to medium-duty applications. This 1-1/4" x 1-1/4" angle features a hot-dip galvanized finish conforming to ASTM A653 for superior corrosion resistance, ideal for custom framing, shelving, and MRO projects. Learn More

Durable 1-1/4" x 1-1/4" x 16GA Galvanized Slotted Angle for versatile framing and support applications. Made from commercial-grade, corrosion-resistant galvanized steel conforming to ASTM A653 standards, it is ideal for constructing custom shelving, racks, and braces. Pre-punched slots allow for easy bolt-together assembly. Learn More

Galvanized Slotted Angle is a versatile framing material made from durable 16 gauge steel. Featuring a corrosion-resistant galvanized finish meeting ASTM A653 standards, it's ideal for constructing custom racks, supports, and maintenance frames. The pre-punched slotted pattern allows for easy, bolt-together assembly. Learn More

Our Galvanized Slotted Angle is a versatile steel framing component for general construction and MRO projects. Made from 16 gauge galvanized steel for superior corrosion resistance, this 1-1/2" x 1-1/2" angle provides reliable support for shelving, bracing, and custom frameworks that meet industrial manufacturing standards. Learn More

Galvanized Slotted Angle (1-1/2" x 1-1/2" x 16GA) is a versatile framing material made from durable, corrosion-resistant galvanized steel meeting ASTM A653 standards. It is perfect for constructing custom shelving, racks, and supports for industrial MRO and fabrication projects. The pre-punched slotted pattern allows for simple, bolt-together assembly. Learn More

Durable Galvanized Slotted Angle for versatile framing and support applications. Fabricated from commercial-grade steel with a corrosion-resistant galvanized finish meeting ASTM A653 coating standards. The 1-1/2" x 1-1/2" x 16GA profile provides reliable integrity for MRO and construction projects. Learn More

Constructed from durable steel, this 16-gauge slotted angle features a corrosion-resistant galvanized finish meeting ASTM A653 standards. The 1-1/2" x 1-1/2" profile is pre-punched for versatile, bolt-together assembly of custom racks, frames, and supports in MRO and fabrication applications. Learn More

Our Galvanized Slotted Angle is a versatile steel framing component ideal for custom shelving, racks, and bracing. Manufactured from durable steel with a corrosion-resistant galvanized finish, this 16 gauge angle provides reliable performance for MRO and fabrication projects. The pre-punched slots allow for easy, bolt-together assembly. Learn More

Galvanized Slotted Angle (2-1/4" x 1-1/2" x 16GA) crafted from low carbon steel with an ASTM A653 compliant galvanized coating for superior corrosion resistance. Ideal for constructing custom frames, racks, and supports in industrial and commercial applications. Learn More

Versatile 16-gauge galvanized slotted angle for industrial framing and support. This pre-punched steel angle (2-1/4" x 1-1/2" x 48") conforms to ASTM standards for strength and provides excellent corrosion resistance for MRO and custom fabrication projects. Learn More

This Galvanized Slotted Angle features a durable 16-gauge steel construction with a corrosion-resistant galvanized finish conforming to ASTM standards. Ideal for versatile industrial framing, shelving, and general MRO applications where a strong, bolt-together system is required. Learn More

Versatile 16-gauge steel slotted angle for framing and support, featuring a hot-dip galvanized finish for superior corrosion resistance. This product, measuring 2-1/4" x 1-1/2" x 120", provides a durable, bolt-together solution for industrial shelving, racks, and MRO projects. Learn More

This Galvanized Slotted Angle measures 2-1/4" x 1-1/2" x 16GA in a 144" length. Manufactured from steel meeting ASTM A653 standards with a G90 galvanized coating, it offers superior corrosion resistance for custom framing, shelving, and MRO support structures. Learn More

A compact and secure 10-digit mini garage door and gate opener with keychain. Built with industrial-grade components for reliable access control in commercial and MRO applications. Features a durable, weather-resistant casing for long-lasting performance. Learn More

This 1 1/4" x 1 3/4" small welding tab is manufactured from high-quality, weldable low-carbon steel. Featuring a 1/8" thickness and a 3/8" hole, it provides a reliable connection point for industrial fabrication and repair projects compatible with AWS certified consumables. Learn More

This 1-1/2" x 2-1/2" Large Welding Tab is precision-cut from 1/8" thick, high-quality weldable low-carbon steel. Designed with a 3/8" hole for versatile mounting, it meets AWS D1.1 structural welding standards for reliable fabrication. Learn More

The Flower Welding Tab 1 x 3 is a versatile fabrication component made from high-quality, weldable mild steel. These tabs provide secure mounting and connection points, ideal for various industrial and ornamental welding projects. They are designed for reliability and ease of use in professional fabrication settings. Learn More

This 1-1/2" x 3-7/8" oval welding tab is manufactured from high-quality, weldable mild steel for superior strength and ease of use. At 9 gauge (0.15") thick with two pre-drilled holes, it provides a robust mounting point for industrial fabrication and MRO projects. Learn More

Our L-Clip Welding Tab is an essential component for professional fabrication. Made from high-quality, weldable low-carbon steel, this 1-1/2 x 1-1/2 tab ensures clean weld starts and strong temporary connections, designed for use in processes compliant with AWS/ASME standards. Learn More

The L-Clip Welding Tab is a critical fabrication component made from high-quality, weldable mild steel. Measuring 1-1/2" x 3-1/2", this tab is engineered for creating strong, precise fixturing points and conforms to general industry standards for material quality and weldability. Learn More

Our 3-1/2x2-1/4 Weldable Butt Hinges are engineered from high-strength, low-carbon steel for maximum weld penetration and durability. These components are designed for heavy-duty applications where a permanent, strong pivot is required. Ideal for steel gates, doors, and MRO projects. Learn More

Our 3x3 Heavy Duty Weldable Butt Hinges are engineered from high-strength, low-carbon steel for maximum durability. Designed for high-load applications, these hinges meet industrial fabrication standards (ANSI/BHMA A156.1 Grade 1) for reliable performance on heavy gates, doors, and equipment. Learn More

Engineered for durability, these 4x4 Heavy Duty Weldable Butt Hinges are fabricated from high-grade, weldable carbon steel. Their robust construction provides a reliable pivot point for heavy gates, doors, and industrial enclosures. Supplied unfinished for easy welding and custom finishing. Learn More

Engineered for strength and durability, these 5x5 Heavy Duty Weldable Butt Hinges are essential for industrial gates, doors, and custom fabrication. Made from high-quality, weldable low-carbon steel, they provide a secure and permanent pivot point. Ideal for heavy-duty applications requiring robust performance. Learn More

Our 6x6 Heavy Duty Weldable Butt Hinges are engineered for maximum strength in demanding applications. Forged from high-quality, low-carbon weldable steel, these hinges provide a robust pivot point for heavy gates and industrial doors. The plain steel finish is ready for welding and custom coating. Learn More

Industrial-grade Razor Wire Clips sold in convenient 25-packs. Made from heavy-duty galvanized steel for superior corrosion resistance and high tensile strength. Essential hardware for securing concertina and razor wire in high-security fence installations. Learn More

Our 3-Inch Rubber Roller is an industrial-grade component designed for material handling and fabrication. Features a durable, high-traction rubber surface on a steel core, engineered for consistent performance in MRO and production environments. Learn More

Our 12-inch rubber roller is an industrial-grade component designed for high-load capacity material handling. Featuring a durable, non-marring rubber surface bonded to a steel core, it provides smooth movement for conveyor systems and industrial carts. Engineered to meet demanding MRO and fabrication requirements. Learn More

This industrial-grade Galvanized Corner Guard is manufactured from 16 gauge steel for high-impact wall and corner protection. It features a G90 hot-dip galvanized coating compliant with ASTM A653 for excellent corrosion resistance in commercial and MRO applications. Learn More

This 1-1/2" x 1-1/2" x 36" corner guard is fabricated from 16 gauge galvanized steel for excellent durability and impact resistance. The G90 zinc coating provides superior corrosion protection, making it ideal for industrial and commercial environments. Perfect for protecting walls, columns, and equipment. Learn More

A 16 gauge galvanized steel corner guard providing robust impact and abrasion resistance for walls and edges. Manufactured to meet ASTM A653 standards for corrosion protection, this 2-1/2" x 2-1/2" x 36" guard is ideal for high-traffic commercial and industrial environments. The G90 galvanized finish ensures long-lasting durability. Learn More

Protect high-traffic areas with our durable 16-gauge Galvanized Steel Corner Guard. Featuring a G90 galvanized coating for superior corrosion resistance, this 2" x 2" x 36" guard provides robust impact protection for commercial and industrial walls. Learn More

Protect high-traffic areas with our Galvanized Corner Guard. Made from durable 16 gauge steel with a G90 galvanized coating for superior corrosion resistance, conforming to ASTM A653 standards. Ideal for industrial, commercial, and MRO applications requiring robust wall and corner protection. Learn More

4" x 1-1/2" Hot Rolled Steel Rectangular Tube with a 0.065" wall, manufactured to ASTM A500 Grade B specifications. This structural grade tubing offers a minimum 46,000 PSI yield strength and excellent weldability, making it ideal for fabrication. Its high strength-to-weight ratio is perfect for trailer frames, structural supports, and machine bases. In stock for immediate Los Angeles pickup. Learn More

Protect your hands with our industrial-grade Goat Leather Driving Gloves. These gloves are rated to ANSI/ISEA 105 standards, providing excellent dexterity and durability for material handling. The premium goat leather construction ensures a comfortable fit and reliable protection for MRO and fabrication tasks. Learn More

Durable split leather work gloves designed for industrial use. These gloves are ANSI/ISEA 105 rated and feature a reinforced palm for enhanced grip and abrasion resistance, ideal for material handling and fabrication. Learn More

Aviation Snip Set 3 pcs Green, Yellow and Red Handles. Learn More

Rubber Mallet

• Head L: 4-1/2"
• Face DIA: 3"
• Overall H: 14"

Learn More

Hitch Ball 6" Learn More

Morse Metal Devil NXT

• 7-1/4" x 5/8"
• 5800 RPM
• 48 Teeth Metal
• Carbide Tipped Circular Saw Blade

Learn More

11" Face Clamp Learn More

Regal Cuter Set 2 Pcs (2-1/2" and 3-7/8") Heavy Duty Utility Cutter Set Learn More

This 2" Square Pressed Steel Cap provides a clean, protective finish for square tubing and fence posts. Fabricated from durable, weldable mild steel, it prevents water ingress and adds a professional aesthetic to any ornamental ironwork project. Learn More

The Super Tool Press Pliers 10" are engineered from high-strength forged alloy steel for superior gripping power and durability. Designed to meet ASME B107 standards, these industrial-grade pliers are essential for demanding fabrication and MRO tasks. Learn More

Secure equipment and materials with the Regal 2” x 20ft Ratchet Cargo Lash. This industrial tie-down is made from durable polyester webbing, meets WSTDA-T-1 standards, and features a 3,335 lbs Working Load Limit (WLL) for reliable performance. Learn More

The 1-¼” Single Lockbox with a single hole is an essential component for security gates and fences. Constructed from high-quality, weldable steel, it provides a durable housing for gate locks. Designed for easy installation and long-term performance in commercial and residential applications. Learn More

This 1-¼” Single Hole Lockbox is fabricated from high-quality, weldable steel. Designed for security gate and fence applications, it provides a durable housing for standard lock mechanisms. Its single-hole configuration ensures straightforward installation and compatibility. Learn More

This 4” x 1-¾” V-Groove Wheel is an industrial-grade component designed for high-capacity material handling. Manufactured from high-strength steel for durability, it supports heavy loads on inverted angle iron tracks. Ideal for sliding gates, assembly lines, and industrial carts. Learn More

This 4" Heavy Duty Solid V-Groove Wheel is engineered for high-load applications on inverted angle iron track. Constructed from solid steel for maximum durability and smooth operation, it's ideal for industrial sliding gates, material handling carts, and production line systems. Supports significant weight with reliable guidance. Learn More

This 6" Cast Iron V-Groove Wheel is engineered for smooth operation on angle iron tracks. Made from industrial-grade Class 25-30 gray iron, it supports a heavy-duty load capacity of 500 lbs. Ideal for sliding gates, industrial doors, and material handling carts. Learn More

This 6” heavy-duty solid V-groove wheel is engineered for high-capacity industrial applications. Constructed from solid steel for maximum durability, it supports significant load ratings and is designed for reliable operation on angle iron tracks. Ideal for industrial gates, heavy carts, and material handling systems. Learn More

This Small Slide Bolt features a durable 1/2" diameter steel shaft for reliable latching. Manufactured from industrial-grade low-carbon steel similar to ASTM A307 material, it provides a simple and effective security solution for light-duty doors and gates. Its robust construction ensures long-lasting performance in MRO and fabrication applications. Learn More

This large industrial slide bolt features a robust 3/4" diameter steel shaft and durable black finish. Engineered for reliable security on heavy-duty gates, doors, and enclosures. Ideal for fabrication and MRO applications. Learn More

EAGLE CHROME SERIES 1 BUTTON VISOR REMOTE/TRANSMITTER EG642 COMPATIBLE WITH NEW EAGLE CHROME RECEIVER ONLY EG650/EG652 Learn More

EAGLE 2000 FR (1HP) (FOOT RELEASE) SLIDE GATE OPERATOR Learn More

The EAGLE II Swing Gate Operator provides robust and reliable gate automation. This industrial-grade operator is UL 325 compliant for safety and features a heavy-duty steel chassis for durability in commercial and high-traffic applications. Learn More

The ACCESS 10 Transmitter is a durable, 10-digit remote for commercial garage doors and gates. Engineered for reliability and UL/CSA certified, it ensures secure access for MRO and facility management applications. Features a robust industrial polymer casing for long-term use. Learn More

This 8 x ½ Pan Head Phillips Truss Screw is a versatile fastener made from low carbon steel. It features a zinc plating with CR3+ passivate compliant with ASTM B633 for reliable corrosion resistance. The wide truss head provides an excellent bearing surface for thin materials. Learn More

The 14 x ¾” Hex Washer Self-Drill Screw is a high-performance fastener for metal-to-metal applications. Compliant with SAE J78 standards, it features a zinc plating (ASTM B633) for corrosion resistance and an integrated neoprene washer for a weatherproof seal. Learn More

The 14 x 2” Hex Washer Self-Drill Screw is a high-performance fastener engineered to SAE J78 standards. It features a hardened steel point for drilling into metal without a pilot hole and a bonded neoprene washer for a weather-tight seal. The zinc plating, compliant with ASTM B633, provides excellent corrosion resistance for exterior applications. Learn More

This ½” x 3” Hex Lag Screw is manufactured from low-carbon steel for reliable performance in general construction and framing. It meets ASTM A307 specifications, providing a minimum tensile strength of 60,000 psi. The zinc-plated finish offers moderate corrosion resistance. Learn More

This 5/16" x 1" Hex Lag Screw is a heavy-duty fastener made from low carbon steel, meeting ASTM A307 standards. With a minimum tensile strength of 60,000 psi and a corrosion-resistant zinc plating, it ensures strong, reliable connections in wood framing and construction applications. Learn More

This 5/16” x 2” Hex Lag Screw is a heavy-duty fastener for wood applications. Made from low carbon steel and zinc-plated for corrosion resistance, it meets ASTM A307 specifications for strength and reliability. The hex head allows for high-torque installation. Learn More

This 1/4" x 2" Hex Lag Screw features a protective zinc plating per ASTM B633. Manufactured from low carbon steel, it meets ASTM A307 specifications, providing reliable holding power and a minimum tensile strength of 60,000 psi for wood construction applications. Learn More

This 1/4" x 2-1/2" Hex Lag Screw is manufactured from low carbon steel, conforming to ASTM A307 strength standards. The zinc-plated finish (ASTM B633) provides essential corrosion resistance, making it ideal for wood construction and framing applications. Learn More

This 1/2" x 3" Hex Lag Screw features a zinc-plated finish for moderate corrosion resistance. Manufactured from low carbon steel to meet ASTM A307 standards, it provides reliable holding power for wood construction and framing applications. Learn More

A 1/2" x 4" Hex Lag Screw featuring a protective zinc plating per ASTM B633. Manufactured from low carbon steel compliant with ASTM A307 standards for reliable performance in light-duty framing and construction. Learn More