Search results for: 'primer oper inches'

A 26 Gauge x 36" x 240" Galvanized PBR Panel, manufactured to ASTM A653 standards. Features a protective zinc coating applied via a hot-dip process for excellent corrosion and rust resistance. The underlying steel provides up to 80,000 PSI tensile strength. Ideal for residential roofing, commercial siding, and agricultural structures. In stock Los Angeles. Learn More

24 Gauge Galvanized B-Deck sheet measuring 36" wide by 96" long. Produced from zinc-coated carbon steel conforming to ASTM A653, it provides excellent corrosion resistance and structural integrity. The 'B' profile is engineered for high strength-to-weight performance, making it ideal for roof decks, mezzanine floors, and structural siding applications. In stock for immediate Los Angeles pickup. Learn More

A36 Hot Rolled Steel Flat Bar measuring 5 inches wide by 1/8 inch thick. Conforming to ASTM A36, this structural steel bar offers 36,000 PSI minimum yield strength and excellent weldability. Its large width makes it ideal for manufacturing base plates, heavy structural supports, trailer frames, and die components. This versatile, low-cost material is easily fabricated. In stock for same-day Los Angeles pickup. Learn More

This 6061-T6 Aluminum Flat Bar measures 1 inch wide by 3/16 inch thick in a 144-inch length. Conforming to ASTM B211, it combines high strength (45,000 PSI tensile) with excellent machinability and corrosion resistance. The T6 temper indicates it is heat-treated for maximum strength. This versatile size is ideal for structural bracing, machine ways, and custom mounting plates. In stock Los Angeles. Learn More

4 Inch x 3/16 Inch A36 Hot Rolled Steel Flat Bar. This structural steel bar conforms to ASTM A36 and features a minimum yield strength of 36,000 PSI with excellent weldability. The large 4-inch width is ideal for heavy-duty applications including structural base plates, trailer frames, equipment mounting, and general fabrication projects requiring robust support. In stock and ready for same-day pickup in Los Angeles. Learn More

2" Nominal Pipe Size (NPS) Galvanized Steel Pipe, Schedule 40 wall, 21-foot length. Conforms to ASTM A53 Grade B with 60,000 PSI tensile strength. The hot-dip zinc coating provides excellent corrosion resistance for outdoor and high-moisture use. Ideal for plumbing mains, HVAC piping, handrails, and structural posts. In stock for same-day Los Angeles pickup. Learn More

Our 3-1/2x2-1/4 Weldable Butt Hinges are engineered from high-strength, low-carbon steel for maximum weld penetration and durability. These components are designed for heavy-duty applications where a permanent, strong pivot is required. Ideal for steel gates, doors, and MRO projects. Learn More

A36 Hot Rolled Steel Flat Bar measuring 2-1/2 inches wide by 1 inch thick, sold in 20-foot lengths. This structural steel meets ASTM A36 standards and provides a minimum yield strength of 36,000 PSI. Its excellent weldability and good formability make it a top choice for fabrication. This medium-sized bar is ideal for structural bracing, equipment frames, and general repairs. In stock and available for pickup in Los Angeles. Learn More

Our Industrial-Grade Gloss Black DTM Paint is a high-performance alkyd coating designed for direct application on metal. It provides excellent corrosion resistance and a durable, high-gloss finish suitable for demanding fabrication and MRO environments. Learn More

Industrial-grade Acetone is a powerful, fast-evaporating solvent designed for cleaning and degreasing metal surfaces. It effectively removes oils, grease, and contaminants, ensuring optimal surface preparation for painting or welding. Conforms to industrial purity standards like ASTM D329. Learn More

2-inch Nominal Pipe Size (NPS) 6063-T5 Aluminum Pipe with a Schedule 40 wall, in a 240-inch length. Conforms to ASTM B241 standards with 27,000 PSI tensile strength. Known as architectural aluminum, it offers excellent corrosion resistance and a superior surface finish, making it ideal for handrails, frames, and display fixtures. In stock for same-day Los Angeles pickup. Learn More

1-inch OD 304 Stainless Steel Round Tube with a 0.120-inch wall, 240-inch length. Conforms to ASTM A269, this tubing combines a 73,200 PSI tensile strength with excellent corrosion resistance and weldability. Its versatile nature makes it ideal for structural applications, architectural handrails, food processing equipment, and general fabrication projects. In stock and available for same-day pickup in Los Angeles. Learn More

1/8 inch diameter 6061-T6 Aluminum Round Bar, 144 inches long. This versatile alloy conforms to ASTM B211 and features 45,000 PSI tensile strength, excellent machinability, and superior corrosion resistance. Its small diameter is perfect for producing pins, dowels, small shafts, and other precision turned parts requiring high strength and a good surface finish. In stock for same-day pickup in Los Angeles. Learn More

1/2 Inch x 1 Inch 6061-T6 Aluminum Flat Bar, 144" length. Conforms to ASTM B211, offering a versatile combination of 45,000 PSI tensile strength, good machinability, and excellent corrosion resistance. This heat-treatable grade is ideal for structural framing, base plates, and machined components where strength and light weight are required. In stock for same-day Los Angeles pickup. Learn More

1-1/2 inch OD x 0.065 inch wall Hot Rolled Steel Round Tube, 240 inches long. Produced to ASTM A500 Grade B specifications, this tubing provides a minimum yield strength of 46,000 PSI and excellent weldability for structural applications. The medium diameter is ideal for machinery frames, handrails, and general fabrication. In stock for immediate cutting and Los Angeles pickup. Learn More

Our industrial-grade DTM Clear Coat is a high-performance alkyd coating designed for direct application on metal surfaces. It provides exceptional corrosion resistance and a durable, transparent finish ideal for MRO and fabrication projects. Learn More

Hanover Green DTM is an industrial-grade, direct-to-metal coating engineered for superior corrosion protection. Its durable alkyd formulation provides a long-lasting, semi-gloss finish on steel surfaces, ideal for professional fabrication and MRO. Learn More

A versatile, industrial-grade lacquer thinner for reducing paint viscosity and cleaning metal surfaces. This fast-evaporating solvent ensures optimal paint flow and prepares substrates for DTM coatings. Ideal for use with alkyd and oil-based industrial paints. Learn More

2-1/2" nominal Schedule 40 Galvanized Steel Pipe, 21-foot length. Conforms to ASTM A53 Grade B, with 60,000 PSI tensile strength for structural integrity. The hot-dip zinc coating provides excellent corrosion and rust resistance. Large diameter is ideal for main water lines, industrial piping, and structural columns. In stock for immediate Los Angeles pickup. Learn More

The Flower Welding Tab 1 x 3 is a versatile fabrication component made from high-quality, weldable mild steel. These tabs provide secure mounting and connection points, ideal for various industrial and ornamental welding projects. They are designed for reliability and ease of use in professional fabrication settings. Learn More

A 3/16" x 4" Cold Rolled 1018 Steel Flat Bar, 144 inches long. Produced to ASTM A108 standards, this bar provides a tensile strength of 63,800 PSI, tight dimensional tolerances, and excellent machinability. The smooth, scale-free surface is ideal for applications requiring a clean finish. Suitable for base plates, structural components, and machine parts. In stock Los Angeles. Learn More

10 inch by 1/2 inch A36 Hot Rolled Steel Flat Bar, available in 20-foot lengths. This structural steel conforms to ASTM A36 specifications, providing a minimum yield strength of 36,000 PSI and excellent weldability. Its large width makes it an ideal choice for heavy-duty applications such as machinery base plates, structural supports, die components, and trailer frames. In stock for Los Angeles pickup. Learn More

Our 1/2 inch Cobalt Drill Bit is engineered from M35 steel with 5% cobalt for superior heat resistance up to 1100°F. Featuring a 135° split-point geometry compliant with ANSI standards, this bit is designed for high-performance drilling in hard materials like stainless steel and cast iron. Learn More

1-1/4" NPS Schedule 40 Galvanized Steel Pipe, 252" length. Conforming to ASTM A53 Grade B, this pipe provides a minimum 60,000 PSI tensile strength and superior corrosion resistance from its hot-dip zinc coating. It is ideal for outdoor structural applications like handrails, fencing, and scaffolding, as well as for plumbing and fluid conveyance. In stock Los Angeles. Learn More

1 inch 1018 Cold Rolled Steel Hexagon Bar, 144-inch length. Conforms to ASTM A108 standards, delivering 63,800 PSI tensile strength and excellent machinability. Its smooth finish and tight tolerances make it ideal for fasteners, nuts, hydraulic fittings, and machined components requiring a hex shape for gripping. In stock for same-day Los Angeles pickup. Learn More

3" NPS Schedule 40 Galvanized Steel Pipe, sold in 21 ft lengths. Conforms to ASTM A53 Grade B with a 60,000 PSI tensile strength. The hot-dip zinc coating provides excellent corrosion resistance for outdoor and high-moisture environments. This large diameter pipe is ideal for main water lines, industrial process piping, structural columns, and protective barriers. In stock for same-day Los Angeles pickup. Learn More

1-inch diameter A36 Hot Rolled Steel Round Bar in 240-inch (20 ft) lengths. This general-purpose structural steel conforms to ASTM A36 and provides a minimum yield strength of 36,000 PSI. Its excellent weldability and formability make it a top choice for fabrication projects, support braces, shafts, and axles. Available for same-day pickup in Los Angeles. Learn More

1 Inch by 3/16 Inch A36 Hot Rolled Steel Flat Bar, sold in 20-foot lengths. This structural steel conforms to ASTM A36 and provides a minimum yield strength of 36,000 PSI with excellent weldability and formability. Its medium size is ideal for structural bracing, equipment frames, and general fabrication projects requiring reliable strength and durability. In stock for same-day Los Angeles pickup. Learn More

This 6 inch by 3/8 inch 1018 Cold Rolled Steel Flat Bar offers tight dimensional tolerances and a smooth, scale-free surface. Conforming to ASTM A108, it has a tensile strength of 63,800 PSI and excellent machinability. Its large width makes it ideal for base plates, structural gussets, and heavy equipment mounting. In stock for Los Angeles pickup. Learn More

This 2 inch by 3/8 inch A36 Hot Rolled Steel Flat Bar is a versatile structural steel that conforms to ASTM A36. It offers a minimum yield strength of 36,000 PSI and excellent weldability and formability. Its medium size is ideal for structural bracing, machine ways, base plates, and general fabrication projects requiring strength and durability. In stock and available for same-day pickup in Los Angeles. Learn More

5/16 inch diameter 1018 Cold Rolled Round Bar, sold in 144-inch lengths. Conforms to ASTM A108 specifications, offering 63,800 PSI tensile strength, tight dimensional tolerances, and excellent machinability. Its smooth, scale-free surface is ideal for precision parts like pins, dowels, small shafts, and fastener blanks. In stock for same-day Los Angeles pickup. Learn More

7/8 inch diameter 1018 Cold Rolled Round Bar, sold in 144-inch lengths. Conforms to ASTM A108 with 63,800 PSI tensile strength and excellent machinability. The cold drawn process provides a smooth finish and tight dimensional tolerances. This medium-diameter bar is ideal for shafts, axles, pins, and general-purpose machined components. In stock for Los Angeles pickup. Learn More

1-1/2 inch wide by 1/4 inch thick Hot Rolled Steel Flat Bar. Manufactured from A36 carbon structural steel, this bar meets ASTM A36 standards and offers a minimum yield strength of 36,000 PSI. Its excellent weldability and good machinability make it ideal for structural bracing, machine ways, supports, and general fabrication projects. In stock and ready for same-day pickup in Los Angeles. Learn More

4 inch x 1/4 inch 6061-T6 Aluminum Flat Bar, 144-inch length. Conforming to ASTM B211, this versatile alloy combines 45,000 PSI tensile strength with good machinability and excellent corrosion resistance. The T6 temper provides optimal strength for structural applications. This large width is ideal for base plates, heavy structural components, and die components. In stock for immediate Los Angeles pickup. Learn More

4 inch Nominal Pipe Size (NPS) Hot Rolled Black Pipe, Schedule 40 wall thickness, 252 inch length. Conforms to ASTM A53 Grade B with 60,000 PSI tensile strength. This large diameter pipe is ideal for main water lines, industrial process piping, and structural columns. Excellent weldability for easy fabrication. In stock for Los Angeles pickup. Learn More

Our Pacific Brown industrial-grade paint features advanced Direct-to-Metal (DTM) technology for superior corrosion protection. This durable alkyd coating is engineered for single-coat application on prepared metal surfaces, ideal for demanding MRO and fabrication projects. Learn More

Our Gloss Black DTM Oil-Based Paint is an industrial-grade alkyd coating designed for superior corrosion resistance. This direct-to-metal formula provides a durable, high-gloss finish ideal for demanding MRO and fabrication applications. Learn More

Bobco's 217B is an industrial-grade, direct-to-metal (DTM) alkyd enamel designed for superior corrosion protection on steel and iron surfaces. This high-performance coating is ideal for demanding MRO and fabrication applications, providing a durable, weather-resistant finish. Learn More

A 2" x 11 gauge Galvanized Square Tube, available in 24-foot lengths. Manufactured from ASTM A500 Grade B steel, this tube provides a minimum yield strength of 46,000 PSI for structural applications. The hot-dip galvanized zinc coating delivers superior corrosion resistance for outdoor use. Ideal for trailer frames, gates, handrails, and structural supports. In stock in Los Angeles. Learn More

2 inch diameter 6061-T6 Aluminum Round Bar, 144" length. Conforms to ASTM B211, offering 45,000 PSI tensile strength, good machinability, and excellent corrosion resistance. This medium-diameter bar is a versatile choice for shafts, axles, structural components, and general-purpose machined parts. In stock for immediate Los Angeles pickup. Learn More

1-inch diameter Cold Rolled All Thread Rod in a 120-inch length with a zinc plated finish. This rod meets ASTM A307 Grade A strength requirements, with a base material tensile strength of 63,800 PSI. The zinc plating provides good corrosion resistance for general-purpose fastening, anchoring systems, and suspending HVAC fixtures. In stock for immediate Los Angeles pickup. Learn More

4" x 1-1/2" Hot Rolled Steel Rectangular Tube with a 0.065" wall, manufactured to ASTM A500 Grade B specifications. This structural grade tubing offers a minimum 46,000 PSI yield strength and excellent weldability, making it ideal for fabrication. Its high strength-to-weight ratio is perfect for trailer frames, structural supports, and machine bases. In stock for immediate Los Angeles pickup. Learn More

These 7" J-Bolt Adjustable Barrel Hinges are engineered from high-strength steel for maximum durability in heavy-duty applications. Designed for weld-on installation, they provide a smooth, reliable pivot for industrial gates and doors. The adjustable J-bolt allows for precise alignment and tensioning. Learn More

A 3-inch diameter heavy-duty hitch ball constructed from solid, hot-forged steel for maximum strength and durability. The corrosion-resistant chrome-plated finish ensures reliable performance in demanding weather conditions. This large ball size is engineered for gooseneck couplers and heavy industrial trailers, providing a secure connection for your most substantial loads. In stock for immediate Los Angeles pickup. Learn More

1/4 inch diameter Cold Rolled All Thread Rod with a zinc plated finish for corrosion resistance. Continuous threading along its 120-inch length provides versatile fastening. Made from low-carbon steel conforming to ASTM A307 strength requirements, it offers 63,800 PSI tensile strength. Ideal for light-duty bracing, suspending conduit, and creating custom-length fasteners. In stock for same-day Los Angeles pickup. Learn More

1" x 1" Galvanized Steel Square Tube with a 16 gauge wall, sold in a 24-foot length. Conforming to ASTM A500 Grade B, this structural tubing provides a minimum yield strength of 46,000 PSI. The hot-dip galvanized zinc coating delivers excellent corrosion and rust resistance, making it ideal for outdoor frames, trailers, and gates. In stock for Los Angeles pickup. Learn More

3" x 3" x 3/8" Hot Rolled Steel Angle, sold in 240-inch lengths. Conforms to ASTM A36 with a minimum yield strength of 36,000 PSI. This structural angle provides excellent weldability and good machinability. Its medium size is ideal for equipment bases, structural framing, and heavy-duty shelving supports. In stock for Los Angeles pickup. Learn More

A36 Hot Rolled Steel Angle, 4" x 4" x 3/8" in 20 ft (240") lengths. Conforms to ASTM A36, providing a minimum yield strength of 36,000 PSI with excellent weldability and fabrication characteristics. The large 4-inch legs are ideal for heavy structural applications, building frames, equipment bases, and industrial supports. In stock and available for same-day pickup in Los Angeles. Learn More

This 4" x 4" Heavy Duty Square Steel Base Plate is a robust mounting solution for structural applications. Made from industrial-grade flat steel and pre-drilled with holes for easy anchoring, it provides a stable foundation for posts, columns, and machinery. Ideal for fabrication and construction projects requiring a durable mounting point. Learn More

7/16 inch diameter 1018 Cold Rolled Round Bar in 144-inch lengths. Produced to ASTM A108 standards, this bar offers 53,700 PSI yield strength, excellent machinability, and a smooth, scale-free surface. Its tight dimensional tolerances make it ideal for high-precision applications. This small diameter is perfect for manufacturing dowel pins, small shafts, and fastener blanks. In stock for immediate Los Angeles pickup. Learn More

4" x 4" x 0.120" wall Hot Rolled Steel Square Tube, 240" length. This A500 Grade B structural tubing offers a minimum yield strength of 46,000 PSI and excellent weldability. The large profile is ideal for heavy-duty applications like building columns, equipment frames, trailer manufacturing, and industrial supports. In stock for Los Angeles pickup. Learn More

1-1/2 inch OD Type 304 Stainless Steel Round Tube with a 0.120 inch wall and a 180 grit polished finish. Conforms to ASTM A269, offering 73,200 PSI tensile strength, excellent weldability, and strong corrosion resistance. This medium-sized tube is ideal for architectural handrails, food service equipment, and marine hardware. In stock for Los Angeles pickup. Learn More

3" x 3" x 1/4" A36 Hot Rolled Steel Angle, sold in 240" lengths. Conforming to ASTM A36, this structural angle provides a minimum 36,000 PSI yield strength and excellent weldability. The 3-inch leg size is ideal for medium-duty structural framing, equipment bases, shelving, and general fabrication projects requiring robust support. In stock and available for same-day pickup in Los Angeles. Learn More

1" x 1" x 3/16" 304 Stainless Steel Angle in a 240-inch length. Conforming to ASTM A276, this material provides excellent corrosion resistance and weldability with a tensile strength of 73,200 PSI. Its small profile is ideal for light structural support, custom brackets, architectural trim, and equipment framing where both strength and a clean finish are required. In stock for immediate Los Angeles pickup. Learn More

2" x 2" Hot Rolled Steel Square Tube with a 0.188" (3/16") wall thickness. Conforms to ASTM A500 Grade B with 46,000 PSI minimum yield strength. This structural tubing, also known as HSS, offers an excellent strength-to-weight ratio, superior weldability, and durability. Ideal for trailer frames, equipment bases, roll cages, and general fabrication projects. In stock for same-day pickup in Los Angeles. Learn More

2" x 2" x 3/16" 304 Stainless Steel Angle, available in 240-inch lengths. Conforming to ASTM A276, this angle provides 73,200 PSI tensile strength, excellent corrosion resistance, and superior weldability. Its medium size is ideal for structural framing, equipment bases, shelving, and architectural trim. A fundamental component for fabrication projects requiring both strength and a clean finish. In stock for Los Angeles pickup. Learn More

1-1/4" x 1-1/4" x 3/16" 304 Stainless Steel Angle, sold in 240-inch lengths. Conforming to ASTM A276, this versatile austenitic grade offers excellent corrosion resistance and weldability with a tensile strength of 73,200 PSI. Its small profile is ideal for creating light structural frames, mounting brackets, corner guards, and architectural trim. In stock for Los Angeles pickup. Learn More

1/8" diameter 303 Stainless Steel Round Bar in 144" lengths. Certified to ASTM A582, this free-machining grade offers 90,000 PSI tensile strength and excellent machinability for high-speed production. The sulfur content ensures superior chip breaking and a fine surface finish. This small diameter is ideal for pins, dowels, fastener blanks, and precision screw machine parts. In stock for Los Angeles pickup. Learn More

5 inch Nominal Pipe Size (NPS) Galvanized Steel Pipe with a Schedule 40 wall thickness (0.258"), available in 21 ft lengths. Conforms to ASTM A53 Grade B with 60,000 PSI tensile strength. The hot-dip zinc coating provides superior corrosion resistance for outdoor and high-moisture use. This large diameter pipe is ideal for structural columns, main water lines, and industrial process piping. In stock for Los Angeles pickup. Learn More

A36 Hot Rolled Steel Flat Bar, 1" wide by 3/8" thick in a 240-inch length. This general-purpose structural steel conforms to ASTM A36, offering a minimum yield strength of 36,000 PSI and excellent weldability. Its medium width is ideal for structural bracing, machine ways, support brackets, and general fabrication projects. In stock for same-day Los Angeles pickup. Learn More

SKU 215 is an industrial-grade construction adhesive engineered for high-strength bonding. Compliant with ASTM C557, this adhesive provides a durable, reliable bond for a wide range of materials in fabrication and MRO projects. Learn More

This industrial-grade construction adhesive provides a high-strength bond for a wide range of materials. Compliant with ASTM C557 standards, it is engineered for reliability in demanding construction, fabrication, and MRO applications. Learn More

This industrial utility block is a versatile hardware component for MRO and fabrication. Made from durable, general-purpose low-carbon steel, it serves as a reliable spacer, shim, or mounting base. Its precise dimensions ensure stability in various industrial applications. Learn More

6" x 1/4" A36 Hot Rolled Steel Flat Bar, sold in 240" (20 ft) lengths. Conforming to ASTM A36, this structural steel offers a minimum yield strength of 36,000 PSI and excellent weldability. The large 6-inch width is ideal for manufacturing machinery base plates, heavy structural braces, and trailer frame components. In stock for same-day Los Angeles pickup. Learn More

2-1/2" x 2-1/2" Hot Rolled Steel Square Tube with a 0.250" (1/4") wall, in a 20-foot length. Conforms to ASTM A500 Grade B, providing a minimum yield strength of 46,000 PSI and excellent weldability. This medium-sized structural tubing is ideal for fabricating equipment frames, structural supports, trailer tongues, and roll cages. In stock for immediate Los Angeles pickup. Learn More

5" x 3/8" A36 Hot Rolled Steel Flat Bar. This structural steel conforms to ASTM A36, providing a minimum yield strength of 36,000 PSI and excellent weldability for easy fabrication. The large 5-inch width makes it a robust choice for heavy structural components, equipment bases, die components, and machinery mounting plates. In stock and available for custom cutting and same-day Los Angeles pickup. Learn More

3/4" x 16 gauge Galvanized Square Tube, 24' length. Conforms to ASTM A500 Grade B with a 58,000 PSI tensile strength. The hot-dip zinc coating provides excellent corrosion resistance for outdoor applications. This small-profile tube is ideal for lightweight frames, gates, railings, and agricultural structures. In stock for immediate pickup in Los Angeles. Learn More

1-1/2" x 1/4" 304 Stainless Steel Angle in 240-inch lengths. Conforming to ASTM A276, this versatile angle provides 73,200 PSI tensile strength, excellent corrosion resistance, and superior weldability. Its medium size is ideal for structural framing, equipment bases, shelving, and architectural trim. A non-magnetic, austenitic steel perfect for fabrication projects requiring durability and a clean finish. In stock for immediate Los Angeles pickup. Learn More

5" x 1/2" Hot Rolled A36 Steel Flat Bar, supplied in 240-inch (20-foot) lengths. This structural steel bar conforms to ASTM A36 and offers a minimum yield strength of 36,000 PSI with excellent weldability and formability. Its large cross-section is ideal for manufacturing heavy-duty base plates, structural supports, trailer frames, and other general fabrication projects requiring robust strength. In stock for immediate Los Angeles pickup. Learn More

3-1/2 inch NPS Schedule 40 Galvanized Steel Pipe. Conforming to ASTM A53 Grade B, this pipe features a hot-dip zinc coating for superior corrosion resistance and 60,000 PSI tensile strength. Its durable, weather-resistant finish makes it ideal for outdoor structures, water lines, and safety barriers. Large diameter suitable for main water lines and structural columns. In stock for Los Angeles pickup. Learn More

1-inch diameter 304 Stainless Steel Round Bar, 144" length. Conforms to ASTM A276, providing 73,200 PSI tensile strength with excellent corrosion resistance and weldability. This versatile austenitic grade is ideal for a wide range of applications. Its medium diameter is perfectly suited for shafts, axles, architectural supports, and machined components. In stock for Los Angeles pickup. Learn More

This 1-1/2" x 2-1/2" Large Welding Tab is precision-cut from 1/8" thick, high-quality weldable low-carbon steel. Designed with a 3/8" hole for versatile mounting, it meets AWS D1.1 structural welding standards for reliable fabrication. Learn More

This 1-¼" x 3-¼" L-Clip Welding Tab is a high-quality fabrication component made from durable, weldable mild steel. Designed for structural connections and reinforcement, it conforms to AWS welding practices for strength and reliability. Ideal for creating strong, permanent weld points in MRO and new construction projects. Learn More

This industrial-grade Safety Yellow DTM (Direct-to-Metal) paint provides exceptional corrosion protection in a single coat. Formulated as a high-performance alkyd coating, it's engineered for durability on steel and other metal surfaces. Ideal for MRO and new fabrication projects. Learn More

This industrial-grade, oil-based DTM paint delivers a durable black semi-gloss finish. Its alkyd enamel formulation provides excellent corrosion resistance and adhesion directly on prepared metal surfaces, making it ideal for fabrication and MRO projects. Learn More

NEW TOYOTA GRAY is a high-performance, oil-based industrial coating featuring Direct-to-Metal (DTM) technology. This industrial-grade alkyd enamel provides excellent corrosion resistance and a durable, protective finish for demanding applications on steel, iron, and equipment surfaces. Learn More

This Safety Yellow industrial coating features advanced Direct-to-Metal (DTM) oil-based alkyd technology for superior adhesion and corrosion protection. It provides a durable, high-visibility finish ideal for MRO and equipment applications, meeting industrial performance benchmarks. Learn More

1-1/4" x 1/2" A36 Hot Rolled Steel Flat Bar, sold in 240-inch (20 ft) lengths. This structural steel conforms to ASTM A36 and provides a minimum yield strength of 36,000 PSI. Its excellent weldability and formability make it a versatile choice for general fabrication. This medium-width bar is ideal for structural bracing, equipment frames, and base plates. In stock for Los Angeles pickup. Learn More

A 3" x 1/2" Hot Rolled Steel Flat Bar conforming to ASTM A36. This general-purpose structural steel features 58,000 PSI tensile strength and excellent weldability. The hot-rolled process results in a scaly, mill finish suitable for applications where strength is prioritized over precise dimensions. Its medium width is ideal for structural bracing, support brackets, and general fabrication projects. In stock for immediate Los Angeles pickup. Learn More

6" x 1/2" 1018 Cold Rolled Steel Flat Bar, 144" length. Conforms to ASTM A108 with 63,800 PSI tensile strength and excellent machinability. The cold drawing process provides tight dimensional tolerances and a smooth, scale-free finish. Its substantial 6-inch width makes it ideal for base plates, heavy structural components, and die sets. In stock for Los Angeles pickup. Learn More

A36 Hot Rolled Steel Flat Bar, 1-1/2" wide by 3/16" thick, in 240-inch lengths. Conforms to ASTM A36 with 36,000 PSI minimum yield strength. This low-carbon steel offers excellent weldability and good formability. As a medium-width bar, it is ideal for structural bracing, equipment frames, base plates, and general fabrication projects. In stock for immediate Los Angeles pickup. Learn More

3/4 inch diameter Cold Rolled All Thread Rod in a 120-inch length with a zinc-plated finish for corrosion resistance. Manufactured from low-carbon steel, its strength conforms to ASTM A307 Grade A with a typical tensile strength of 63,800 PSI. This versatile, continuously threaded rod is ideal for general-purpose fastening, bracing, and anchoring applications in construction and industrial settings. In stock Los Angeles. Learn More

1/2" NPS Schedule 40 Galvanized Steel Pipe in 21-foot lengths. Conforms to ASTM A53 Grade B with a 60,000 PSI tensile strength. The hot-dip zinc coating provides superior corrosion resistance for outdoor and high-moisture environments. This small diameter is ideal for plumbing, non-potable water lines, conduit, and residential handrails. In stock for same-day Los Angeles pickup. Learn More

This 8" x 8" heavy-duty square steel base plate provides a robust foundation for structural and industrial applications. Made from high-strength carbon steel, it features pre-drilled holes for compatibility with heavy-duty fasteners meeting SAE J429 and ASTM standards. Learn More

Industrial Coating 251V is a high-performance, direct-to-metal (DTM) alkyd enamel designed for superior corrosion protection. This industrial-grade coating provides a durable, weather-resistant finish for MRO and fabrication applications, formulated to meet MIL-SPEC performance criteria. Learn More

3/4" x 1/4" A36 Hot Rolled Steel Flat Bar, sold in 240-inch (20-foot) lengths. Conforms to ASTM A36 with a minimum yield strength of 36,000 PSI. This versatile and economical steel bar offers excellent weldability and formability. Its small profile is ideal for manufacturing support brackets, straps, shims, and general fabrication projects. In stock for same-day Los Angeles pickup. Learn More

1 Inch Schedule 40 Hot Rolled Black Pipe, sold in 21-foot lengths. Manufactured to ASTM A53 Grade B standards, it offers 60,000 PSI tensile strength and excellent weldability. This medium-sized pipe is ideal for natural gas lines, fire sprinkler systems, scaffolding, and general structural fabrication. An economical choice for fluid conveyance and support applications. In stock for Los Angeles pickup. Learn More

3/4 inch 1018 Cold Rolled Steel Square Bar, sold in 144" lengths. This general-purpose low-carbon steel conforms to ASTM A108, offering excellent machinability and a clean, smooth surface finish. The cold drawing process increases strength to 63,800 PSI and provides tight dimensional tolerances, making it ideal for shafts, fixtures, and precision machined parts. In stock Los Angeles. Learn More

3/4" x 1/4" Type 304 Stainless Steel Flat Bar, 144" length. Conforms to ASTM A276 and offers a balance of strength and excellent corrosion resistance. With 73,200 PSI tensile strength and superior weldability, this versatile bar is ideal for manufacturing structural brackets, braces, and food processing equipment components. Its clean mill finish is also suitable for architectural trim. In stock for Los Angeles pickup. Learn More

5/8 inch 1018 Cold Rolled Hexagon Bar, 144" length. Conforms to ASTM A108 with 63,800 PSI tensile strength. The cold drawing process provides a smooth surface, tight dimensional accuracy, and excellent machinability. This medium-sized bar is ideal for manufacturing nuts, standoffs, hydraulic fittings, and machinery shafts. In stock for Los Angeles pickup. Learn More

This 3/4" diameter 1018 Cold Rolled Round Bar is a 144-inch low-carbon steel product conforming to ASTM A108. It offers a tensile strength of 63,800 PSI, superior dimensional accuracy, and a smooth, scale-free surface. Known for its excellent machinability and good weldability, it is ideal for producing shafts, axles, and precision machined components. In stock for immediate pickup in Los Angeles. Learn More

1/2" diameter Cold Rolled All Thread Rod, supplied in 120-inch lengths with a zinc plated finish for corrosion resistance. Conforming to the strength requirements of ASTM A307, this rod offers a tensile strength of 63,800 PSI. Its continuous threading provides maximum versatility for custom-length fasteners, anchoring systems, and structural bracing. In stock for same-day Los Angeles pickup. Learn More

2 inch Schedule 40 Hot Rolled Black Pipe. Conforms to ASTM A53 Grade B standards, offering 60,000 PSI tensile strength and excellent weldability for strong, reliable joints. This medium-sized pipe is ideal for plumbing mains, HVAC piping, fire sprinkler systems, and structural applications like handrails and support posts. In stock and ready for same-day pickup in Los Angeles. Learn More

1" OD x 0.065" wall Hot Rolled Steel Round Tube, available in 240-inch lengths. Produced to ASTM A500 Grade B specifications, this structural tubing provides 58,000 PSI tensile strength and excellent weldability. Its medium diameter is ideal for fabricating equipment frames, handrails, support columns, and roll cages. The hot-rolled finish is ready for welding and can be painted or coated. In stock for Los Angeles pickup. Learn More

1/2 inch Nominal Pipe Size (NPS) Hot Rolled Black Pipe with a Schedule 40 wall. This product conforms to ASTM A53 Grade B specifications, providing 60,000 PSI tensile strength and excellent weldability. The small diameter is ideal for plumbing, natural gas lines, compressed air systems, and light structural applications like handrails. Standard uncoated 'black' finish. In stock for Los Angeles pickup. Learn More

1-1/4 inch Nominal Pipe Size (NPS), Schedule 40 Hot Rolled Black Pipe in a 21 ft length. Manufactured to ASTM A53 Grade B standards, this carbon steel pipe offers 60,000 PSI tensile strength and excellent weldability. The medium diameter is ideal for plumbing mains, fire sprinkler systems, and structural applications. In stock for Los Angeles pickup. Learn More

1-1/2 inch Nominal Pipe Size (NPS) Hot Rolled Black Pipe with a Schedule 40 wall thickness. Made from carbon steel conforming to ASTM A53 Grade B specifications, this pipe offers a minimum tensile strength of 60,000 PSI and excellent weldability. Its medium size is well-suited for plumbing mains, structural posts, handrails, and fire protection systems. In stock for immediate Los Angeles pickup. Learn More

This 1-1/4" square pressed steel cap provides a clean, finished look for fence posts and railings. Made from durable, weldable mild steel, it protects post interiors from debris and weather. Ideal for ornamental and security fencing applications. Learn More

The C-Scroll (5112A) is a classic decorative element forged from high-quality Class 25-30 gray iron. This architectural-grade component is designed to add an elegant, traditional finish to custom fences, gates, and railings in fabrication projects. Learn More

3-1/2 inch Nominal Pipe Size (NPS), Schedule 40 Hot Rolled Black Pipe in a 252" (21 ft) length. This product conforms to ASTM A53 Grade B, offering 60,000 PSI tensile strength and excellent weldability. As a large diameter pipe, it is ideal for main water lines, industrial process piping, structural columns, and large-scale fabrication projects. In stock and available for same-day pickup in Los Angeles. Learn More