Search results for: 'low carri steel fender washer'

2-1/2" x 1/8" 304 Stainless Steel Flat Bar, 144" length. Conforms to ASTM A276, offering 73,200 PSI tensile strength, excellent corrosion resistance, and superior weldability. This versatile austenitic grade is non-magnetic in its annealed state. The medium-width profile is ideal for structural bracing, equipment framework, base plates, and general fabrication. In stock for Los Angeles pickup. Learn More

1-1/4" x 1-1/4" 304 Stainless Steel Square Tube with a 0.065" wall and a 180-grit satin finish. Conforming to ASTM A269, it offers 73,200 PSI tensile strength, excellent corrosion resistance, and superior weldability. Its combination of structural integrity and polished appearance makes it ideal for architectural handrails, support frames, and decorative applications. In stock for Los Angeles pickup. Learn More

This 2" x 2" x 1/8" Type 304 Stainless Steel Angle offers an excellent combination of strength, corrosion resistance, and weldability. Conforming to ASTM A276, it provides 73,200 PSI tensile strength for reliable performance. Its medium size is ideal for structural framing, equipment bases, shelving, and general fabrication projects requiring durability and a clean finish. In stock for same-day Los Angeles pickup. Learn More

A36 Hot Rolled Steel Angle with 5" and 3" legs, a 3/8" thickness, and 240" length. This unequal leg angle conforms to ASTM A36, providing a minimum 36,000 PSI yield strength and excellent weldability. The large profile is ideal for heavy-duty structural applications, including building frames, equipment bases, and industrial supports. In stock and ready for same-day pickup in Los Angeles. Learn More

2" x 2" x 1/4" Type 304 Stainless Steel Angle, 240" length. Conforms to ASTM A276, offering excellent corrosion resistance and weldability with 73,200 PSI tensile strength. This versatile, medium-sized angle is ideal for structural framing, equipment bases, shelving, and architectural trim where both strength and a clean finish are required. In stock for immediate Los Angeles pickup or delivery. Learn More

304 Stainless Steel Flat Bar, 1-1/2" wide by 1/4" thick. Conforms to ASTM A276, this versatile bar offers excellent corrosion resistance, weldability, and 73,200 PSI tensile strength. Its medium size is ideal for structural bracing, machine ways, equipment frames, and architectural trim. Annealed condition provides good formability. In stock and available for same-day pickup in Los Angeles. Learn More

This 3/8" x 1-1/2" 304 Stainless Steel Flat Bar is a versatile, general-purpose alloy conforming to ASTM A276. It provides 73,200 PSI tensile strength, excellent resistance to corrosion, and superior weldability. Its medium profile is ideal for structural bracing, machine ways, support brackets, and general fabrication projects. In stock and available for same-day pickup in Los Angeles. Learn More

This 1" x 1" x 1/8" Type 304 Stainless Steel Angle provides excellent corrosion resistance and structural rigidity. Conforming to ASTM A276, it features 73,200 PSI tensile strength and superior weldability. Its small profile is ideal for light framing, equipment brackets, corner guards, and architectural trim where both strength and a clean finish are required. In stock for same-day cutting and pickup in Los Angeles. Learn More

2" x 2" x 3/16" 304 Stainless Steel Angle, available in 240-inch lengths. Conforming to ASTM A276, this angle provides 73,200 PSI tensile strength, excellent corrosion resistance, and superior weldability. Its medium size is ideal for structural framing, equipment bases, shelving, and architectural trim. A fundamental component for fabrication projects requiring both strength and a clean finish. In stock for Los Angeles pickup. Learn More

1-1/4" OD x 0.065" wall 304 Stainless Steel Round Tube with a 180 grit polished finish. This versatile tubing meets ASTM A269 standards and offers a combination of 73,200 PSI tensile strength, excellent weldability, and superior corrosion resistance. Its medium diameter is ideal for architectural applications like handrails, decorative frameworks, and food service equipment. In stock for same-day Los Angeles pickup. Learn More

1" x 1/2" Hot Rolled Rectangular Steel Tube with a 0.065" wall thickness. Manufactured to ASTM A500 Grade B specifications, this structural tubing provides a 58,000 PSI tensile strength and excellent weldability. Its combination of strength and formability makes it ideal for building frames, trailer cross-members, and machinery bases. The hot rolled finish has a dark mill scale. In stock for immediate Los Angeles pickup. Learn More

1-1/2" x 1-1/2" x 0.065" wall 304 Stainless Steel Square Tube, supplied in 20-foot lengths. Conforms to ASTM A269 with a tensile strength of 73,200 PSI. This tube features a 180 grit satin finish, excellent corrosion resistance, and superior weldability. Its medium size is ideal for architectural handrails, equipment frames, support structures, and decorative applications. In stock for immediate Los Angeles pickup. Learn More

Hot Rolled Steel Rectangular Tube, 1-1/2" x 1" with a 0.065" wall thickness. Conforms to ASTM A500 Grade B with a minimum tensile strength of 58,000 PSI. This structural grade tube offers an excellent strength-to-weight ratio and is easily welded. Ideal for equipment frames, trailer cross-members, and structural supports. In stock for same-day Los Angeles pickup. Learn More

A 2" x 1-1/2" Hot Rolled Steel Rectangular Tube with a 0.120" wall, supplied in 20 ft (240") lengths. Conforms to ASTM A500 Grade B, offering 58,000 PSI tensile strength and excellent weldability. This structural grade hollow structural section (HSS) is ideal for trailer frames, building supports, machine bases, and general fabrication. In stock for same-day pickup in Los Angeles. Learn More

1-1/2" x 1" Hot Rolled Steel Rectangular Tube with a 0.120" wall thickness. Manufactured to ASTM A500 Grade B specifications, this structural tubing provides a high strength-to-weight ratio and excellent weldability. Ideal for equipment frames, structural supports, trailer cross-members, and general fabrication. In stock for immediate Los Angeles pickup. Learn More

3" x 1-1/2" Hot Rolled Steel Rectangular Tube with a 0.188" wall thickness. Conforms to ASTM A500 Grade B, offering 58,000 PSI tensile strength and excellent weldability. This hollow structural section (HSS) is ideal for trailer frames, building supports, and industrial machine bases where strength against bending and torsion is required. In stock for immediate Los Angeles pickup. Learn More

Hot rolled steel rectangular tube measuring 4" x 1-1/2" with a 0.083" wall, in 20 ft (240") lengths. Manufactured to ASTM A500 Grade B specifications, this structural tubing provides 58,000 PSI tensile strength and excellent weldability. Its large profile offers a high strength-to-weight ratio, ideal for building frames, trailer construction, and industrial supports. In stock for same-day pickup in Los Angeles. Learn More

3" x 1-1/2" x 0.083" wall Hot Rolled Steel Rectangular Tube, conforming to ASTM A500 Grade B. This structural tubing offers a minimum 58,000 PSI tensile strength, excellent weldability, and a high strength-to-weight ratio. Its dimensions make it ideal for fabricating equipment frames, trailer cross-members, and support columns. In stock for immediate cutting and pickup in Los Angeles. Learn More

3" x 1-1/2" Hot Rolled Steel Rectangular Tube with a 0.065" wall thickness, supplied in a 20-foot (240") length. Manufactured to ASTM A500 Grade B specifications, this structural tubing provides 58,000 PSI tensile strength and excellent weldability. Its high strength-to-weight ratio makes it ideal for building frames, trailer construction, support columns, and general fabrication projects. In stock for same-day Los Angeles pickup. Learn More

3" x 1-1/2" Hot Rolled Steel Rectangular Tube with a 0.120" wall thickness, supplied in 240" (20 ft) lengths. This structural tubing conforms to ASTM A500 Grade B, providing a minimum yield strength of 46,000 PSI and excellent weldability. Its high strength-to-weight ratio makes it ideal for building frames, trailer manufacturing, and industrial supports. In stock for Los Angeles pickup. Learn More

3/4" x 3/4" x 1/8" 304 Stainless Steel Angle. An austenitic grade conforming to ASTM A276, this angle provides excellent corrosion resistance and weldability with 73,200 PSI tensile strength. Its small profile is ideal for creating lightweight structural frames, mounting brackets, corner guards, and decorative architectural trim where both strength and a clean finish are required. In stock for immediate Los Angeles pickup. Learn More

Hot Rolled Steel Rectangular Tube, 1-1/2" x 1/2" with a 0.065" wall thickness. This structural tubing conforms to ASTM A500 Grade B, offering a tensile strength of 58,000 PSI and excellent weldability. Its high strength-to-weight ratio makes it ideal for constructing trailer frames, building supports, and industrial machine bases. Medium-sized profile suitable for general fabrication. In stock for Los Angeles pickup. Learn More

1-1/2" x 3/4" Hot Rolled Steel Rectangular Tube with a 0.065" wall, sold in 20-foot lengths. Conforms to ASTM A500 Grade B with 58,000 PSI tensile strength and excellent weldability. This hollow structural section (HSS) is ideal for trailer frames, equipment bases, gate frames, and other general fabrication projects requiring a good strength-to-weight ratio. In stock for Los Angeles pickup. Learn More

1-1/4" x 1-1/4" x 3/16" A36 Hot Rolled Steel Angle, often called angle iron. This structural grade steel conforms to ASTM A36, providing a minimum yield strength of 36,000 PSI and excellent weldability for general fabrication. Its small profile is ideal for light framing, support brackets, trim, and equipment guards. In stock for immediate cutting and same-day Los Angeles pickup. Learn More

1-1/2" x 1-1/2" x 3/16" Hot Rolled Steel Angle conforming to ASTM A36. This general-purpose structural steel provides a minimum 36,000 PSI yield strength and excellent weldability. The medium size is ideal for equipment frames, support bracing, heavy-duty shelving, and general fabrication. In stock and ready for same-day pickup or delivery in Los Angeles. Learn More

A36 Hot Rolled Steel Angle measuring 1-3/4" x 1-3/4" with a 3/16" thickness. This structural angle conforms to ASTM A36 standards and offers a minimum yield strength of 36,000 PSI and excellent weldability. The hot-rolled process results in a scaled finish. Its medium size is ideal for structural framing, equipment bases, bracing, and general fabrication projects requiring robust, easy-to-weld steel. In stock in Los Angeles. Learn More

1-1/2" x 1/4" 304 Stainless Steel Angle in 240-inch lengths. Conforming to ASTM A276, this versatile angle provides 73,200 PSI tensile strength, excellent corrosion resistance, and superior weldability. Its medium size is ideal for structural framing, equipment bases, shelving, and architectural trim. A non-magnetic, austenitic steel perfect for fabrication projects requiring durability and a clean finish. In stock for immediate Los Angeles pickup. Learn More

A36 Hot Rolled Steel Angle, measuring 1-3/4" x 1-3/4" with a 1/8" thickness. This structural angle conforms to ASTM A36 specifications and provides a minimum yield strength of 36,000 PSI. Its excellent weldability and formability make it ideal for manufacturing equipment frames, structural bracing, support brackets, and general fabrication projects. In stock and ready for same-day pickup in Los Angeles. Learn More

This 1-1/4" x 1-1/4" x 1/4" Type 304 Stainless Steel Angle conforms to ASTM A276. It provides a tensile strength of 73,200 PSI, excellent corrosion resistance, and superior weldability. Its small leg size makes it ideal for light structural supports, brackets, corner guards, and architectural trim. In stock Los Angeles. Learn More

3-1/2" x 3-1/2" x 1/4" A36 Hot Rolled Steel Angle, 240" length. Conforms to ASTM A36 with a minimum yield strength of 36,000 PSI and excellent weldability. This large structural angle is ideal for heavy-duty applications like building frames, industrial supports, and equipment bases where strength and rigidity are critical. In stock for immediate Los Angeles pickup. Learn More

1-1/4" x 1-1/4" x 1/8" 304 Stainless Steel Angle, sold in 20 ft (240") lengths. This versatile angle conforms to ASTM A276 and provides 73,200 PSI tensile strength, excellent corrosion resistance, and superior weldability. Its small profile is ideal for light structural framing, manufacturing equipment guards, support brackets, and architectural trim. In stock and available for same-day pickup in Los Angeles. Learn More

This 1-1/2" x 3/16" 304 Stainless Steel Angle offers excellent corrosion resistance and weldability for structural applications. Conforming to ASTM A276, it provides 73,200 PSI tensile strength. Its versatile 1-1/2" leg size is ideal for medium-duty structural framing, equipment bases, shelving, and architectural trim where both strength and a clean finish are required. In stock for immediate Los Angeles pickup. Learn More

1-1/4" x 1-1/4" x 3/16" 304 Stainless Steel Angle, sold in 240-inch lengths. Conforming to ASTM A276, this versatile austenitic grade offers excellent corrosion resistance and weldability with a tensile strength of 73,200 PSI. Its small profile is ideal for creating light structural frames, mounting brackets, corner guards, and architectural trim. In stock for Los Angeles pickup. Learn More

2-1/2" x 2-1/2" x 3/16" 304 Stainless Steel Angle, available in 20-foot lengths. This versatile austenitic stainless angle conforms to ASTM A276, offering 73,200 PSI tensile strength, excellent corrosion resistance, and superior weldability. Its medium size is ideal for structural framing, equipment bases, shelving, and architectural trim where both strength and a clean finish are required. In stock for Los Angeles pickup. Learn More

A36 Hot Rolled Steel Angle with 2-1/2" x 2-1/2" legs and 1/4" thickness. Conforming to ASTM A36, this structural angle provides a minimum yield strength of 36,000 PSI. Its excellent weldability and durability make it a primary choice for structural framing, equipment bases, bracing, and general fabrication projects. This medium profile offers robust support for various load-bearing applications. In stock for same-day Los Angeles pickup. Learn More

This 1-1/2" x 1-1/2" x 1/8" angle is manufactured from Type 304 stainless steel, conforming to ASTM A276 specifications. It offers a tensile strength of 73,200 PSI, excellent corrosion resistance, and superior weldability. Its medium size is ideal for structural framing, equipment bases, brackets, and architectural trim where both strength and a clean finish are required. In stock for same-day Los Angeles pickup. Learn More

Our 5-inch barrel hinges are constructed from high-strength, weldable steel for maximum durability. Engineered for heavy-duty gates and doors, these hinges provide a smooth, reliable pivot point for industrial fabrication and MRO projects. The plateless design allows for direct welding to steel surfaces. Learn More

This industrial-grade 0.9mm (.035") MIG wire is AWS/ASME certified for consistent and reliable welds. Ideal for a wide range of steel fabrication and repair applications, it ensures strong performance and smooth feeding. Available in 33 LBS spools for production environments. Learn More

Our 9-inch barrel hinges are engineered from high-strength, weldable steel for superior durability. Designed for heavy-duty industrial gates, doors, and security applications, these hinges provide smooth, reliable operation. The plateless design allows for direct, clean welding to frames and posts. Learn More

This large industrial slide bolt features a robust 3/4" diameter steel shaft and durable black finish. Engineered for reliable security on heavy-duty gates, doors, and enclosures. Ideal for fabrication and MRO applications. Learn More

This industrial-grade 0.9mm (.035) MIG welding wire is engineered for high-performance fabrication and repair. Certified to meet AWS/ASME standards, it provides a stable arc and minimal spatter for clean, strong welds on various steel types. Available in an 11 LBS (1KG) spool. Learn More

This 4-inch V-Groove Wheel is engineered for smooth operation on inverted angle iron tracks. Its forged steel construction provides durability and a high load capacity for sliding gates, industrial carts, and heavy-duty rolling doors. The precision-machined groove ensures accurate alignment and reduced friction. In stock for immediate pickup or delivery in Los Angeles. Learn More

This high-performance 0.8mm (.030") MIG welding wire is engineered for superior results in fabrication and repair. AWS/ASME certified, it ensures strong, consistent welds on mild and carbon steels. Packaged in convenient 11 LBS (1KG) spools for project efficiency. Learn More

These 7" J-Bolt Adjustable Barrel Hinges are engineered from high-strength steel for maximum durability in heavy-duty applications. Designed for weld-on installation, they provide a smooth, reliable pivot for industrial gates and doors. The adjustable J-bolt allows for precise alignment and tensioning. Learn More

26 Gauge Galvanized Steel PBR (Purlin Bearing Rib) Sheet, measuring 36 inches wide by 96 inches long. Conforms to ASTM A653, offering excellent corrosion resistance from its protective zinc coating. The base steel provides a minimum 36,000 PSI yield strength for structural integrity. Ideal for residential roofing, commercial siding, and agricultural building applications. In stock and ready for pickup in Los Angeles. Learn More

1-1/4 inch Nominal Pipe Size (NPS), Schedule 40 Hot Rolled Black Pipe in a 21 ft length. Manufactured to ASTM A53 Grade B standards, this carbon steel pipe offers 60,000 PSI tensile strength and excellent weldability. The medium diameter is ideal for plumbing mains, fire sprinkler systems, and structural applications. In stock for Los Angeles pickup. Learn More

This industrial-grade 0.8mm (.030") flux core welding wire is engineered for high-performance fabrication and repair. Meeting AWS/ASME certification standards, it provides a stable arc and excellent bead appearance for general-purpose steel welding. Packaged in a convenient 11 lbs (1kg) spool. Learn More

Our 3x3/4 Barrel Hinges are heavy-duty, weld-on hardware engineered for high-load applications. Constructed from durable, unfinished weldable steel, they provide a robust pivot point for heavy gates, doors, and custom fabrication projects. These industrial-grade hinges ensure smooth, reliable operation and are ready for welding and finishing. Learn More

1-1/4" NPS Schedule 40 Galvanized Steel Pipe, 252" length. Conforming to ASTM A53 Grade B, this pipe provides a minimum 60,000 PSI tensile strength and superior corrosion resistance from its hot-dip zinc coating. It is ideal for outdoor structural applications like handrails, fencing, and scaffolding, as well as for plumbing and fluid conveyance. In stock Los Angeles. Learn More

14 Gauge (48" x 120") A36 Hot Rolled Steel Sheet. Conforms to ASTM A36 with a minimum yield strength of 36,000 PSI. This versatile material offers excellent weldability and good formability, making it a cost-effective choice for various applications. Ideal for structural panels, machine guards, trailer frames, and general fabrication projects. In stock for same-day Los Angeles pickup. Learn More

26 Gauge Galvanized Corrugated Steel Sheet, measuring 36 inches in nominal width by 120 inches in length. Conforms to ASTM A653 specifications with a G90 zinc coating for excellent corrosion resistance. This lightweight, durable panel is ideal for roofing, siding, agricultural buildings, and decorative applications. Its corrugated profile adds rigidity. In stock for immediate pickup in Los Angeles. Learn More

3/16" 1018 Cold Rolled Steel Hex Bar in 144" lengths. Produced to ASTM A108 specifications, this bar offers a 63,800 PSI tensile strength, tight dimensional tolerances, and a clean, smooth surface finish. Its good machinability makes it ideal for producing small fasteners, fittings, and precision hardware. In stock for Los Angeles pickup. Learn More

1" diameter Cold Rolled All Thread Rod in 120" (10 ft) lengths. Made from 1018 steel with an oil finish for rust prevention, this rod meets ASTM A307 Grade A strength requirements with a 60,000 PSI tensile strength. The continuous threading provides versatile fastening for construction, manufacturing, and general repair. Easily cut to custom lengths. In stock for Los Angeles pickup. Learn More

6" x 1/4" 1018 Cold Rolled Steel Flat Bar, 144" length. Conforms to ASTM A108 with 63,800 PSI tensile strength and a smooth, scale-free finish. This large flat bar offers tight dimensional tolerances and excellent machinability, making it ideal for base plates, heavy structural components, and die components where precision is critical. In stock for Los Angeles pickup. Learn More

A 26 Gauge x 36" x 240" Galvanized PBR Panel, manufactured to ASTM A653 standards. Features a protective zinc coating applied via a hot-dip process for excellent corrosion and rust resistance. The underlying steel provides up to 80,000 PSI tensile strength. Ideal for residential roofing, commercial siding, and agricultural structures. In stock Los Angeles. Learn More

The L-Clip Welding Tab is a critical fabrication component made from high-quality, weldable mild steel. Measuring 1-1/2" x 3-1/2", this tab is engineered for creating strong, precise fixturing points and conforms to general industry standards for material quality and weldability. Learn More

This 1-1/2" x 3-7/8" oval welding tab is manufactured from high-quality, weldable mild steel for superior strength and ease of use. At 9 gauge (0.15") thick with two pre-drilled holes, it provides a robust mounting point for industrial fabrication and MRO projects. Learn More

This 1-¼" x 3-¼" L-Clip Welding Tab is a high-quality fabrication component made from durable, weldable mild steel. Designed for structural connections and reinforcement, it conforms to AWS welding practices for strength and reliability. Ideal for creating strong, permanent weld points in MRO and new construction projects. Learn More

Versatile 16-gauge galvanized slotted angle for industrial framing and support. This pre-punched steel angle (2-1/4" x 1-1/2" x 48") conforms to ASTM standards for strength and provides excellent corrosion resistance for MRO and custom fabrication projects. Learn More

The 1” x 3” Flower Welding Tab is a decorative and functional component for custom metal fabrication. Precision cut from 1/8” thick weldable mild steel, it provides a reliable mounting point for ornamental gates, fences, and furniture. Ideal for projects requiring both strength and aesthetic appeal. Learn More

3-1/2 inch NPS Schedule 40 Galvanized Steel Pipe. Conforming to ASTM A53 Grade B, this pipe features a hot-dip zinc coating for superior corrosion resistance and 60,000 PSI tensile strength. Its durable, weather-resistant finish makes it ideal for outdoor structures, water lines, and safety barriers. Large diameter suitable for main water lines and structural columns. In stock for Los Angeles pickup. Learn More

1018 Cold Rolled Steel Flat Bar, 1-1/4" wide by 1/4" thick in 144" lengths. This bar conforms to ASTM A108 and offers a tensile strength of 63,800 PSI. The cold drawing process provides tight dimensional tolerances and a smooth, scale-free surface. It's an excellent choice for machining, forming, and welding, ideal for brackets, machine ways, and structural bracing. In stock for Los Angeles pickup. Learn More

1" x 3/8" 1018 Cold Rolled Steel Flat Bar, 144" length. Conforms to ASTM A108 with 63,800 PSI tensile strength and excellent machinability. The cold drawing process provides a smooth, scale-free surface and tight dimensional tolerances. Ideal for base plates, mounting brackets, and machine components requiring precision without extensive finishing. In stock for Los Angeles pickup. Learn More

Galvanized Slotted Angle (1-1/2" x 1-1/2" x 16GA) is a versatile framing material made from durable, corrosion-resistant galvanized steel meeting ASTM A653 standards. It is perfect for constructing custom shelving, racks, and supports for industrial MRO and fabrication projects. The pre-punched slotted pattern allows for simple, bolt-together assembly. Learn More

1-1/4" NPS, Schedule 10 Hot Rolled Black Pipe manufactured to ASTM A53 Grade B specifications. This carbon steel pipe offers 60,000 PSI tensile strength and excellent weldability. The medium diameter is ideal for plumbing mains, HVAC piping, handrails, and other structural applications. The uncoated black finish is suitable for indoor use or applications requiring a custom coating. In stock for Los Angeles pickup. Learn More

26 Gauge Galvanized PBR Steel Sheet, measuring 36 inches wide by 120 inches long. Conforming to ASTM A653, this panel features a protective zinc coating for excellent corrosion resistance. With a base steel yield strength of 36,000 PSI, it's ideal for roofing, siding, and agricultural structures. Its lightweight profile simplifies installation. In stock for Los Angeles pickup. Learn More

1/2" diameter Cold Rolled All Thread Rod, supplied in 120-inch lengths with a zinc plated finish for corrosion resistance. Conforming to the strength requirements of ASTM A307, this rod offers a tensile strength of 63,800 PSI. Its continuous threading provides maximum versatility for custom-length fasteners, anchoring systems, and structural bracing. In stock for same-day Los Angeles pickup. Learn More

1/2" thick A36 Hot Rolled Steel Plate, 48" x 120". A structural carbon steel conforming to ASTM A36, it provides a guaranteed minimum yield strength of 36,000 PSI and excellent weldability. This heavy-gauge plate is ideal for manufacturing column base plates, heavy equipment mounting pads, gussets, and other demanding structural applications where strength and durability are critical. In stock for immediate Los Angeles pickup. Learn More

2 inch Schedule 40 Hot Rolled Black Pipe. Conforms to ASTM A53 Grade B standards, offering 60,000 PSI tensile strength and excellent weldability for strong, reliable joints. This medium-sized pipe is ideal for plumbing mains, HVAC piping, fire sprinkler systems, and structural applications like handrails and support posts. In stock and ready for same-day pickup in Los Angeles. Learn More

A36 Hot Rolled Steel Channel measuring 1" wide x 1/2" high x 1/8" thick in 20-foot lengths. This general-purpose structural steel conforms to ASTM A36 and provides a minimum yield strength of 36,000 PSI. Its excellent weldability and formability make it ideal for light structural applications, equipment frames, trailer components, and mounting brackets. In stock for Los Angeles pickup. Learn More

1" x 1" 1018 Cold Rolled Steel Square Bar, 144" length. Conforms to ASTM A108 and offers 63,800 PSI tensile strength, a clean surface finish, and tight dimensional tolerances. Its excellent machinability (70% vs 1212) makes it ideal for shafts, dowels, fixtures, and precision machined components. In stock for same-day cutting and Los Angeles pickup. Learn More

3/16" thick A36 Hot Rolled Steel Plate, measuring 48" x 120". This structural plate conforms to ASTM A36 and provides a minimum yield strength of 36,000 PSI with excellent formability and weldability. Its medium thickness is ideal for gussets, structural base plates, and general fabrication projects where strength and economy are key. In stock for immediate Los Angeles pickup. Learn More

A36 Hot Rolled Steel Channel, C4 x 5.4, measuring 4" in height with a 0.180" web thickness and weighing 5.4 lbs/ft. Conforms to ASTM A36 with a minimum yield strength of 36,000 PSI. This channel provides excellent weldability and strength for structural applications like equipment frames, vehicle chassis, and building supports. In stock for immediate Los Angeles pickup. Learn More

This 6 Inch Solid V-Groove Wheel is engineered for high-capacity applications, supporting loads up to 2000 lbs. Manufactured from solid steel to industrial standards, it provides durable and reliable performance on angle iron tracks for gates and carts. Learn More

1 inch 1018 Cold Rolled Steel Hexagon Bar, 144-inch length. Conforms to ASTM A108 standards, delivering 63,800 PSI tensile strength and excellent machinability. Its smooth finish and tight tolerances make it ideal for fasteners, nuts, hydraulic fittings, and machined components requiring a hex shape for gripping. In stock for same-day Los Angeles pickup. Learn More

5 inch Nominal Pipe Size (NPS) Galvanized Steel Pipe with a Schedule 40 wall thickness (0.258"), available in 21 ft lengths. Conforms to ASTM A53 Grade B with 60,000 PSI tensile strength. The hot-dip zinc coating provides superior corrosion resistance for outdoor and high-moisture use. This large diameter pipe is ideal for structural columns, main water lines, and industrial process piping. In stock for Los Angeles pickup. Learn More

This 6 inch by 3/8 inch 1018 Cold Rolled Steel Flat Bar offers tight dimensional tolerances and a smooth, scale-free surface. Conforming to ASTM A108, it has a tensile strength of 63,800 PSI and excellent machinability. Its large width makes it ideal for base plates, structural gussets, and heavy equipment mounting. In stock for Los Angeles pickup. Learn More

1/4" x 1/4" 1018 Cold Rolled Steel Square Bar, 144" length. Conforms to ASTM A108 with 63,800 PSI tensile strength, excellent machinability, and tight dimensional tolerances. The cold drawn finish provides a clean, smooth surface ideal for precision parts. This small square bar is perfect for shafts, dowels, pins, and fixtures. In stock for Los Angeles pickup. Learn More

1-1/2" NPS Schedule 40 Galvanized Steel Pipe, sold in 21-foot (252") lengths. Conforming to ASTM A53 Grade B, this pipe provides a minimum 60,000 PSI tensile strength and superior corrosion resistance from its zinc coating. Its versatile size is ideal for plumbing mains, structural handrails, fence posts, and other outdoor applications requiring durability. In stock Los Angeles. Learn More

A36 Hot Rolled Steel Sheet, 12 Gauge thickness (0.1046") with standard 48" x 120" dimensions. Certified to ASTM A36, this sheet offers a minimum yield strength of 36,000 PSI, excellent weldability, and good formability. Its medium thickness is ideal for structural panels, machine guards, vehicle body panels, and general fabrication projects where a precise finish is not required. In stock for Los Angeles pickup. Learn More

This 1-1/2" x 1-1/2" x 36" corner guard is fabricated from 16 gauge galvanized steel for excellent durability and impact resistance. The G90 zinc coating provides superior corrosion protection, making it ideal for industrial and commercial environments. Perfect for protecting walls, columns, and equipment. Learn More

A 2" x 1/4" 1018 Cold Rolled Steel Flat Bar in a 144" length. Conforming to ASTM A108, this versatile bar features a smooth, scale-free surface, tight dimensional tolerances, and excellent machinability. Its 63,800 PSI tensile strength makes it ideal for structural bracing, machine ways, and general fabrication where precision and a clean finish are required. In stock Los Angeles. Learn More

3/8" x 48" x 120" Hot Rolled Steel Plate, conforming to ASTM A36. This structural plate provides a minimum yield strength of 36,000 PSI and excellent weldability for reliable fabrication. The thick 3/8" profile is ideal for heavy-duty applications like machinery base plates, gussets, and structural supports where strength and durability are critical. In stock for immediate Los Angeles pickup. Learn More

1-1/4" x 1/2" x 1/8" A36 Hot Rolled Steel Channel, sold in 20 ft lengths. This bar-size channel conforms to ASTM A36 specifications and offers a minimum yield strength of 36,000 PSI. Its excellent weldability and good machinability make it a versatile choice for general fabrication. Ideal for small equipment frames, structural brackets, and support braces. In stock for Los Angeles pickup. Learn More

A36 Hot Rolled Steel Channel, size C8 x 11.5, measuring 8" deep with a 2.26" flange and 0.22" web thickness, in a 20-foot length. This structural channel conforms to ASTM A36 standards and offers a minimum yield strength of 36,000 PSI. Its excellent weldability and strength make it ideal for equipment frames, structural supports, and trailer manufacturing. In stock for immediate Los Angeles pickup. Learn More

4" NPS Schedule 40 Galvanized Steel Pipe, sold in 21-foot lengths. Conforming to ASTM A53 Grade B, this pipe has a 60,000 PSI tensile strength and a hot-dip zinc coating for superior corrosion resistance. Its large diameter is ideal for main water lines, industrial process piping, and structural columns. In stock for same-day Los Angeles pickup. Learn More

1" x 3/16" 1018 Cold Rolled Steel Flat Bar, 144" length. Conforms to ASTM A108, delivering 63,800 PSI tensile strength and a smooth, scale-free finish. Known for excellent machinability and weldability, this medium-width bar is a versatile choice for fabricating brackets, machine ways, and structural bracing. In stock for immediate Los Angeles pickup. Learn More

3" x 3/4" 1018 Cold Rolled Steel Flat Bar, 144" length. Conforms to ASTM A108. Features a smooth, scale-free surface, tight tolerances, and excellent machinability. With 63,800 PSI tensile strength, it's ideal for base plates, brackets, and fixtures. This medium-width bar provides robust structural support for fabrication and machinery projects. In stock Los Angeles. Learn More

This 1/8" 6013 All-Purpose Welding Rod is an AWS/ASME certified electrode designed for versatile performance. Ideal for general fabrication and repair on mild steel, it offers a stable arc and easy slag removal. Packaged in a convenient 10 LB container for MRO and project use. Learn More

A36 Hot Rolled Steel Channel measuring 2" height, 1" flange, and 1/8" thickness in a 20-foot (240") length. This versatile structural shape conforms to ASTM A36 standards, offering a minimum yield strength of 36,000 PSI and excellent weldability. Its medium size is ideal for equipment frames, vehicle chassis components, structural bracing, and general fabrication projects. In stock for immediate Los Angeles pickup. Learn More

3" x 5/8" 1018 Cold Rolled Steel Flat Bar, 144" length. Conforms to ASTM A108 with 63,800 PSI tensile strength, excellent machinability, and superior dimensional tolerances. Its smooth, scale-free surface is ideal for painting or plating. This medium-width bar is used for structural bracing, machine ways, and base plates. In stock for same-day Los Angeles pickup. Learn More

2" x 2" Galvanized Steel Square Tube with a 16 gauge wall, 24-foot length. Conforms to ASTM A500 Grade B with 58,000 PSI tensile strength. The hot-dip galvanized zinc coating provides excellent corrosion resistance for outdoor applications. This medium-sized tube is ideal for fabricating trailer frames, gate frames, and structural supports. In stock for Los Angeles pickup. Learn More

1" thick A36 Hot Rolled Steel Plate, 48" x 120". Conforms to ASTM A36 with 36,000 PSI minimum yield strength. This structural plate offers excellent weldability and good machinability. Its large thickness makes it ideal for heavy-duty applications like column base plates, heavy equipment mounting, wear plates, and general fabrication projects requiring robust support. In stock and ready for custom cutting or pickup in Los Angeles. Learn More

A36 Hot Rolled Steel Channel measuring 2" height, 1" width, and 3/16" thickness in 240" (20') lengths. Conforming to ASTM A36, this structural channel offers a minimum yield strength of 36,000 PSI and excellent weldability. It is ideal for equipment frames, trailer manufacturing, structural braces, and general fabrication projects. In stock for Los Angeles pickup. Learn More

1" diameter 1018 Cold Rolled Steel Round Bar, 144" length. Conforming to ASTM A108, this bar has a tensile strength of 63,800 PSI and excellent machinability. Its smooth, scale-free surface and tight dimensional tolerances make it ideal for shafts, axles, pins, and custom machined parts requiring precision. In stock Los Angeles. Learn More

This 6-inch V-Groove wheel is engineered for heavy-duty sliding gates, industrial doors, and material handling systems running on inverted angle iron track. Its durable steel construction ensures high load capacity and smooth operation. The 6-inch diameter provides stability for large gates and spans uneven surfaces effectively. Ideal for fabricators and installers requiring reliable gate hardware. In stock for Los Angeles pickup. Learn More

AWS A5.1 E6013 certified all-purpose welding rod for mild steel applications. This 3/32" diameter electrode provides a smooth, stable arc and easy slag removal, ideal for general fabrication and MRO. Designed for AC or DC operation in all positions. Learn More

A36 Hot Rolled Steel Channel, size C3 x 5.0 (3" Height, 5.0 lbs/ft), in 240" lengths. Conforming to ASTM A36, this structural channel offers a minimum yield strength of 36,000 PSI and excellent weldability. Its C-shaped profile provides good structural support for frames, braces, and trailer components. In stock for immediate Los Angeles pickup. Learn More

4" x 3/8" 1018 Cold Rolled Steel Flat Bar in a 144" length. This bar meets ASTM A108 standards, providing 63,800 PSI tensile strength, a smooth scale-free finish, and tight dimensional tolerances. Its large width makes it ideal for base plates, heavy structural bracing, and die components where precision and strength are required. In stock and available for same-day pickup in Los Angeles. Learn More

1-1/4" x 1/2" Cold Rolled 1018 Steel Flat Bar, 144" length. Conforms to ASTM A108 with 63,800 PSI tensile strength. The cold drawing process provides a smooth, scale-free finish and tight dimensional tolerances, making it excellent for machining. This medium-width bar is ideal for structural bracing, machine ways, base plates, and mounting brackets. In stock for Los Angeles pickup. Learn More