Search results for: 'grit zirconia flat dies'

26 Gauge Galvanized Steel PBR (Purlin Bearing Rib) panel, 36 inches wide by 192 inches (16 ft) long. Conforms to ASTM A653, offering excellent corrosion resistance from its protective zinc coating. Ideal for commercial roofing, agricultural siding, and residential projects, providing a durable, low-maintenance exterior. In stock for same-day pickup in Los Angeles. Learn More

A 26 Gauge x 36" x 240" Galvanized PBR Panel, manufactured to ASTM A653 standards. Features a protective zinc coating applied via a hot-dip process for excellent corrosion and rust resistance. The underlying steel provides up to 80,000 PSI tensile strength. Ideal for residential roofing, commercial siding, and agricultural structures. In stock Los Angeles. Learn More

26 Gauge Galvanized Steel PBR Panel, measuring 36 inches wide by 288 inches (24 feet) long. Produced to ASTM A653 standards, this panel offers excellent corrosion resistance from its protective zinc coating. The PBR (Purlin Bearing Rib) profile provides structural strength, making it ideal for roofing, siding, and agricultural building applications where durability and weather resistance are required. In stock for Los Angeles pickup. Learn More

26 Gauge Galvanized Steel PBR (Purlin Bearing Rib) Sheet, measuring 36 inches wide by 96 inches long. Conforms to ASTM A653, offering excellent corrosion resistance from its protective zinc coating. The base steel provides a minimum 36,000 PSI yield strength for structural integrity. Ideal for residential roofing, commercial siding, and agricultural building applications. In stock and ready for pickup in Los Angeles. Learn More

26 Gauge Galvanized Corrugated Steel Sheet, measuring 36 inches in width by 144 inches in length. Produced via a continuous hot-dip process to ASTM A653 specifications with a G90 zinc coating for excellent rust prevention. This lightweight and formable sheet is ideal for roofing, siding, and agricultural buildings. In stock and available for same-day pickup in Los Angeles. Learn More

26 Gauge Galvanized Corrugated Steel Sheet, measuring 36 inches in nominal width by 120 inches in length. Conforms to ASTM A653 specifications with a G90 zinc coating for excellent corrosion resistance. This lightweight, durable panel is ideal for roofing, siding, agricultural buildings, and decorative applications. Its corrugated profile adds rigidity. In stock for immediate pickup in Los Angeles. Learn More

26 Gauge Galvanized Corrugated Steel Sheet, 36" wide by 96" long. The G90 zinc coating, applied per ASTM A653, delivers excellent corrosion resistance for outdoor use. Its corrugated profile adds rigidity to the lightweight panel, making it ideal for roofing, siding, fencing, and agricultural barriers where durable weather protection is required. In stock for immediate pickup in Los Angeles. Learn More

This 4” x 1/16” x ⅜” cut-off wheel is an industrial-grade abrasive tool for high-speed cutting. Compliant with ANSI B7.1 safety standards, it features fiberglass reinforcement for enhanced durability and stability at its maximum 22,000 RPM rating. Learn More

This 5” x 1/4” grinding disc is engineered for high-performance metal removal. Made from durable aluminum oxide with fiberglass reinforcement, it meets ANSI B7.1 safety standards and is rated for a maximum speed of 12,200 RPM. Learn More

This 5/16" x 4" One Way Screw is crafted from industrial-grade steel for reliable, tamper-resistant fastening. Its unique head design, conforming to general industrial standards, allows for installation with a standard screwdriver but prevents removal. Ideal for security applications where permanent or semi-permanent assembly is required. Learn More

This 5” x .040” cut-off wheel is engineered for high-speed cutting of metal. It is an ANSI B7.1 compliant abrasive wheel featuring durable fiberglass reinforcement for safety and performance. Rated for a maximum of 12,200 RPM, it delivers precise, clean cuts in fabrication and MRO applications. Learn More

Durable 5/8 Inch Square Plastic Caps designed for a secure, press-fit on square tubing. Made from industrial-grade, weather-resistant plastic, these caps provide a clean, finished appearance while protecting against dirt, moisture, and sharp edges. Ideal for fencing, furniture, and equipment fabrication. Learn More

Secure equipment and materials with the Regal 2” x 20ft Ratchet Cargo Lash. This industrial tie-down is made from durable polyester webbing, meets WSTDA-T-1 standards, and features a 3,335 lbs Working Load Limit (WLL) for reliable performance. Learn More

The C45 Cap Rail is an industrial-grade ornamental fitting forged from Class 25-30 gray cast iron. It is designed with a 1-¾” width to securely fit over a standard 1-½” rail, providing a durable and decorative finish for handrail and fencing systems. Learn More

Industrial Coating 218 is a high-performance alkyd and epoxy formulation designed for direct-to-metal (DTM) applications. This corrosion-resistant coating provides a durable finish for industrial MRO and fabrication projects, meeting key performance benchmarks. Learn More

Industrial Coating 227 is a professional-grade, direct-to-metal (DTM) alkyd paint designed for maximum adhesion and durability. This corrosion-resistant coating meets MIL-SPEC performance criteria and is ideal for protecting steel and iron surfaces in demanding industrial environments. Learn More

The C199 is a durable cast iron component designed for 1-1/2" cap rail systems. This ornamental hardware is engineered for a precise fit in ADA-compliant handrail and fencing applications, providing both structural integrity and a decorative finish. Learn More

This 10" x 1/8" x 1" abrasive cut-off wheel is engineered for high-speed metal cutting applications. Featuring fiberglass reinforcement for durability and safety, it is fully compliant with ANSI B7.1 standards. Designed for tools operating at or below a maximum speed of 6,100 RPM. Learn More

Durable 1-1/2 inch square plastic cap designed for a secure fit on square tubing. Made from high-quality, weather-resistant Low-Density Polyethylene (LDPE), this cap provides a clean, finished appearance and protects against debris. Learn More

Our 3x3 Heavy Duty Weldable Butt Hinges are engineered from high-strength, low-carbon steel for maximum durability. Designed for high-load applications, these hinges meet industrial fabrication standards (ANSI/BHMA A156.1 Grade 1) for reliable performance on heavy gates, doors, and equipment. Learn More

Engineered for strength and durability, these 5x5 Heavy Duty Weldable Butt Hinges are essential for industrial gates, doors, and custom fabrication. Made from high-quality, weldable low-carbon steel, they provide a secure and permanent pivot point. Ideal for heavy-duty applications requiring robust performance. Learn More

This 8 x ½ Pan Head Phillips Truss Screw is a versatile fastener made from low carbon steel. It features a zinc plating with CR3+ passivate compliant with ASTM B633 for reliable corrosion resistance. The wide truss head provides an excellent bearing surface for thin materials. Learn More

This 5/16" x 1" Hex Lag Screw is a heavy-duty fastener made from low carbon steel, meeting ASTM A307 standards. With a minimum tensile strength of 60,000 psi and a corrosion-resistant zinc plating, it ensures strong, reliable connections in wood framing and construction applications. Learn More

This 1/4" x 2-1/2" Hex Lag Screw is manufactured from low carbon steel, conforming to ASTM A307 strength standards. The zinc-plated finish (ASTM B633) provides essential corrosion resistance, making it ideal for wood construction and framing applications. Learn More

This 4-1/2" x .040" x 7/8" cut-off wheel is an industrial-grade abrasive engineered for high-speed cutting. It is ANSI B7.1 compliant and features fiberglass reinforcement for enhanced safety and durability during metal fabrication and MRO tasks. Learn More

This 12" x 7/64" Cut-Off Wheel is an industrial-grade abrasive tool compliant with ANSI B7.1 safety standards. Engineered with fiberglass reinforcement for a maximum speed of 5,100 RPM, it is designed for fast, clean cuts on various metals. The 1" arbor hole fits standard stationary cut-off machines. Learn More

This 1/8" 6013 All-Purpose Welding Rod is an AWS/ASME certified electrode designed for versatile performance. With a 60,000 psi tensile strength, its mild steel core and flux coating ensure a stable arc and easy slag removal, making it ideal for general fabrication and repair. Learn More

The 1-1/4 Inch Square Plastic Cap provides a clean, finished look for square tubing applications. Made from durable, weather-resistant black plastic, it protects against sharp edges and internal debris. This cap offers a secure press-fit for reliability in fencing, furniture, and equipment fabrication. Learn More

This 2-1/2 Inch Post Ball Cap is a high-quality ornamental component crafted from durable Class 25-30 gray iron. It provides a classic, protective finish for fence posts, gates, and handrails. Engineered for long-lasting performance in architectural and fabrication projects. Learn More

1/8" diameter 303 Stainless Steel Round Bar in 144" lengths. Certified to ASTM A582, this free-machining grade offers 90,000 PSI tensile strength and excellent machinability for high-speed production. The sulfur content ensures superior chip breaking and a fine surface finish. This small diameter is ideal for pins, dowels, fastener blanks, and precision screw machine parts. In stock for Los Angeles pickup. Learn More