Search results for: 'cold rolled 1018 steel square bar'

1/2" NPS Schedule 40 Galvanized Steel Pipe in 21-foot lengths. Conforms to ASTM A53 Grade B with a 60,000 PSI tensile strength. The hot-dip zinc coating provides superior corrosion resistance for outdoor and high-moisture environments. This small diameter is ideal for plumbing, non-potable water lines, conduit, and residential handrails. In stock for same-day Los Angeles pickup. Learn More

This 14 x 1-1/2" Hex Washer Self-Drill Screw is an industrial-grade fastener designed for efficient metal-to-metal connections. It features a zinc-plated finish per ASTM B633 for corrosion resistance and complies with SAE J78 standards. The integrated neoprene washer provides a weather-tight seal. Learn More

Galvanized PBR sheet, 26 Gauge x 36 inches x 168 inches. Conforms to ASTM A653. Features a protective zinc coating for excellent corrosion resistance. The PBR (Purlin-Bearing Rib) profile provides structural strength for roofing and siding. Lightweight and durable, it's ideal for agricultural, commercial, and residential buildings. In stock Los Angeles. Learn More

This 14 x 1-1/4" Hex Washer Self-Drill Screw is a self-drilling fastener designed for rapid metal-to-metal connections. Compliant with SAE J78 standards, it features a zinc-plated finish (ASTM B633) for corrosion resistance and an integrated neoprene washer for a weatherproof seal. Learn More

The 14 x ¾” Hex Washer Self-Drill Screw is a high-performance fastener for metal-to-metal applications. Compliant with SAE J78 standards, it features a zinc plating (ASTM B633) for corrosion resistance and an integrated neoprene washer for a weatherproof seal. Learn More

This 14 x ¾" Hex Washer Self-Drilling Screw is designed for efficient metal-to-metal fastening. It complies with SAE J78 standards and features a zinc-plated finish per ASTM B633 for corrosion resistance. The integrated neoprene washer ensures a secure, weather-tight seal. Learn More

26 Gauge x 36" x 144" Galvanized PBR (Purlin Bearing Rib) sheet, compliant with ASTM A653. Features a protective zinc coating for excellent corrosion resistance and a minimum yield strength of 36,000 PSI. This lightweight, durable panel is ideal for commercial, residential, and agricultural roofing and siding applications requiring structural integrity and weather protection. In stock for Los Angeles pickup. Learn More

A 10-foot length of No. 40 roller chain with a corrosion-resistant nickel-plated finish. This ANSI B29.1 standard chain offers a 3,700 lbf average tensile strength, making it ideal for gate operators, including the Eagle-2000 series, and other light-duty power transmission applications. This durable chain is pre-packaged for immediate project needs. In stock for Los Angeles pickup. Learn More

Industrial Caster 251 is a heavy-duty mobility solution designed for demanding environments. Featuring an industrial-grade build with certified load ratings from 200-2000 lbs, it provides reliable movement for equipment, carts, and workbenches. Learn More

This 5” x .040” cut-off wheel is engineered for high-speed cutting of metal. It is an ANSI B7.1 compliant abrasive wheel featuring durable fiberglass reinforcement for safety and performance. Rated for a maximum of 12,200 RPM, it delivers precise, clean cuts in fabrication and MRO applications. Learn More

The Bobco Welding Machine MMA 160 is a portable, high-performance stick welder designed for industrial use. It delivers a stable 160-amp arc, ideal for use with AWS/ASME certified electrodes like 6010, 6013, and 7018. Its durable construction ensures reliability for both fabrication and MRO projects. Learn More

This 4-1/2" x .040" x 7/8" cut-off wheel is an industrial-grade abrasive engineered for high-speed cutting. It is ANSI B7.1 compliant and features fiberglass reinforcement for enhanced safety and durability during metal fabrication and MRO tasks. Learn More

This 5” x 1/4” grinding disc is engineered for high-performance metal removal. Made from durable aluminum oxide with fiberglass reinforcement, it meets ANSI B7.1 safety standards and is rated for a maximum speed of 12,200 RPM. Learn More

Engineered for durability, this 1/2" x 4-1/2" masonry drill bit features a robust tungsten carbide tip for efficient drilling in concrete, brick, and block. It is manufactured to meet ANSI B212.15 standards, ensuring reliable performance in demanding construction and MRO applications. Learn More

This Heavy Duty Regal Cutter Set includes two robust utility cutters (2-1/2" and 3-7/8") designed for demanding tasks in any workshop or job site. Featuring durable construction and sharp, reliable blades, this set is perfect for cutting a variety of materials with precision and control. An essential tool for fabricators, shippers, and installers. In stock for Los Angeles pickup. Learn More

The Bobco Mini Portable Welding Machine is a versatile dual-voltage (110V/220V) unit designed for stick welding. It is compatible with AWS-certified electrodes from 1/16" to 1/8" in diameter, delivering reliable performance for light fabrication, repair, and MRO tasks. Learn More

High-performance 4-1/2” x 1/4” grinding disc designed for aggressive material removal. Compliant with ANSI B7.1 safety standards, this fiberglass-reinforced abrasive wheel operates at up to 13,300 RPM. Constructed from durable aluminum oxide for extended life in metal fabrication and MRO tasks. Learn More

This industrial-grade 7” x ¼” x ⅞” grinding disc is engineered for high-performance metal grinding. Compliant with ANSI B7.1 safety standards, it features durable aluminum oxide abrasive material and fiberglass reinforcement for reliability. Rated for a maximum speed of 8,500 RPM. Learn More

This industrial-grade HP Air Spray Gun features a durable aluminum body, a 1.88mm nozzle, and a 1000cc aluminum cup. Engineered for high-volume application, it provides excellent atomization for industrial primers, topcoats, and DTM coatings meeting MIL-SPEC performance criteria. Learn More

6-inch Nominal Pipe Size (NPS) Schedule 40 Galvanized Pipe, 252-inch length. Conforms to ASTM A53 Grade B, delivering 60,000 PSI tensile strength and excellent weldability. The hot-dip zinc coating provides superior corrosion resistance for outdoor and high-moisture environments. Large diameter is ideal for main water lines, industrial process piping, and heavy structural columns. In stock Los Angeles. Learn More

Secure equipment and materials with the Regal 2” x 20ft Ratchet Cargo Lash. This industrial tie-down is made from durable polyester webbing, meets WSTDA-T-1 standards, and features a 3,335 lbs Working Load Limit (WLL) for reliable performance. Learn More

This 1/2" x 4-1/2" industrial masonry drill bit is engineered for high-performance drilling in concrete, brick, and block. It features a durable tungsten carbide tip and complies with ANSI B212.15 standards, ensuring precision and long service life for demanding applications. Learn More

The C-Scroll (5112A) is a classic decorative element forged from high-quality Class 25-30 gray iron. This architectural-grade component is designed to add an elegant, traditional finish to custom fences, gates, and railings in fabrication projects. Learn More

Size 12 rubber boots with a 16" height for maximum protection. Designed for industrial and construction environments, these boots feature a waterproof, seamless construction and a slip-resistant tread for safety on wet surfaces. Durable and flexible for all-day comfort. In stock for immediate pickup at our Los Angeles location. Learn More

The Eagle-2000-FR is a heavy-duty 1HP slide gate opener engineered for commercial and industrial applications. It reliably moves gates up to 45 feet long and weighing 2000 lbs. This complete kit includes two remotes, a receiver, and an EG111 monitored photo eye for enhanced safety and convenience. Its foot release mechanism ensures easy manual operation during power outages. In stock in Los Angeles. Learn More

This industrial-grade 5/16" x 4-1/2" masonry drill bit is engineered for high-performance drilling in concrete, brick, and block. It features a durable tungsten carbide tip for extended life and precision, manufactured to meet ANSI B212.15 standards. Learn More

The Bobco Auto Darkening Weld Helmet provides superior protection, meeting ANSI/ISEA Z87.1+ standards for impact resistance. It features a large 3.94” x 3.15” viewing area for maximum visibility and is constructed from a lightweight, durable high-impact resistant material. Learn More

Size 9-1/2 industrial rubber boots with a 16" height for maximum coverage. Built for demanding job site conditions, these waterproof boots offer reliable protection against water, mud, and debris. The durable rubber construction and treaded, slip-resistant sole provide safety and comfort for fabricators, construction workers, and maintenance personnel. In stock for Los Angeles pickup. Learn More

Size 9 industrial-grade rubber rain boots featuring a 16-inch height for superior protection in wet and muddy conditions. Built with a 100% waterproof, seamless construction and a slip-resistant lug outsole for secure traction on demanding job sites. Ideal for construction, landscaping, and general maintenance work. In stock for Los Angeles pickup. Learn More

Durable 14" brown leather welding gloves engineered for high-heat protection. These industrial-grade gloves meet ANSI/ISEA 105 standards for cut and abrasion resistance, making them ideal for professional welding and fabrication. Learn More

Industrial-grade Acetone is a powerful, fast-evaporating solvent designed for cleaning and degreasing metal surfaces. It effectively removes oils, grease, and contaminants, ensuring optimal surface preparation for painting or welding. Conforms to industrial purity standards like ASTM D329. Learn More

The Bobco Auto-Darkening Welding Helmet offers superior protection, meeting ANSI/ISEA Z87.1+ safety standards. Featuring a 3.67” x 1.70” viewing area and a lightweight 1.07lb polycarbonate body, it ensures comfort and clarity for professional fabrication and MRO tasks. Learn More

A versatile, industrial-grade lacquer thinner for reducing paint viscosity and cleaning metal surfaces. This fast-evaporating solvent ensures optimal paint flow and prepares substrates for DTM coatings. Ideal for use with alkyd and oil-based industrial paints. Learn More