Our Gloss White DTM Oil-Based Paint is an industrial-grade alkyd coating designed for superior corrosion protection. This direct-to-metal formula ensures a durable, high-gloss finish on steel and other metal surfaces, ideal for demanding fabrication and MRO applications. Learn More
This 10" x 1/8" x 1" abrasive cut-off wheel is engineered for high-speed metal cutting applications. Featuring fiberglass reinforcement for durability and safety, it is fully compliant with ANSI B7.1 standards. Designed for tools operating at or below a maximum speed of 6,100 RPM. Learn More
This 4-1/2" x .040" x 7/8" cut-off wheel is an industrial-grade abrasive engineered for high-speed cutting. It is ANSI B7.1 compliant and features fiberglass reinforcement for enhanced safety and durability during metal fabrication and MRO tasks. Learn More
Our 1/2 inch Cobalt Drill Bit is engineered from M35 steel with 5% cobalt for superior heat resistance up to 1100°F. Featuring a 135° split-point geometry compliant with ANSI standards, this bit is designed for high-performance drilling in hard materials like stainless steel and cast iron. Learn More
Our Industrial Grade Oil-Based White Primer is a high-solids, alkyd-based coating designed for superior adhesion and corrosion protection on metal surfaces. This direct-to-metal (DTM) primer provides a durable foundation for topcoats in demanding MRO and fabrication applications. Learn More
This 14 x 1-1/4" Hex Washer Self-Drill Screw is a self-drilling fastener designed for rapid metal-to-metal connections. Compliant with SAE J78 standards, it features a zinc-plated finish (ASTM B633) for corrosion resistance and an integrated neoprene washer for a weatherproof seal. Learn More
The Hook Lock Double Cylinder provides robust security for commercial and industrial gates. Featuring a hardened steel hook bolt and dual-keyed access, this lock is engineered for high-traffic applications and enhanced access control, designed to meet key industry standards for durability and security. Learn More
This 5" x 5" Heavy Duty Square Steel Base Plate is engineered from high-strength carbon steel for maximum durability. It comes pre-drilled for secure anchoring in structural and fabrication applications. Designed for compatibility with common industrial fastening systems like ASTM A307. Learn More
This 5/16" x 4" Hex Lag Screw is manufactured from durable low carbon steel to meet ASTM A307 performance standards. It features a corrosion-resistant zinc plating (per ASTM B633), making it ideal for construction and general framing applications. Learn More
Our L-Clip Welding Tab is an essential component for professional fabrication. Made from high-quality, weldable low-carbon steel, this 1-1/2 x 1-1/2 tab ensures clean weld starts and strong temporary connections, designed for use in processes compliant with AWS/ASME standards. Learn More
This 8" x 8" heavy-duty square steel base plate provides a robust foundation for structural and industrial applications. Made from high-strength carbon steel, it features pre-drilled holes for compatibility with heavy-duty fasteners meeting SAE J429 and ASTM standards. Learn More
Durable 1-1/4" x 1-1/4" x 16GA Galvanized Slotted Angle for versatile framing and support applications. Made from commercial-grade, corrosion-resistant galvanized steel conforming to ASTM A653 standards, it is ideal for constructing custom shelving, racks, and braces. Pre-punched slots allow for easy bolt-together assembly. Learn More
The 4 Sq Pressed Steel Cap provides a durable, clean finish for square tubing and fence posts. Fabricated from high-quality pressed steel for excellent weldability and longevity. Ideal for ornamental ironwork and security fencing projects. Learn More
Our 3" x 3" Heavy Duty Square Steel Base Plate is a robust mounting solution for structural applications. Made from high-strength, weldable low-carbon steel, it features pre-drilled holes for secure anchoring. Ideal for fencing, posts, and equipment support. Learn More
The Super Tool Press Pliers 10" are engineered from high-strength forged alloy steel for superior gripping power and durability. Designed to meet ASME B107 standards, these industrial-grade pliers are essential for demanding fabrication and MRO tasks. Learn More
This high-quality 0.9mm (0.035") MIG welding wire is designed for superior performance in industrial applications. Certified to meet AWS/ASME standards, this steel alloy wire provides a stable arc and minimal spatter for clean, strong welds. Ideal for fabrication, automotive repair, and MRO projects. Learn More
This 14 x ¾" Hex Washer Self-Drilling Screw is designed for efficient metal-to-metal fastening. It complies with SAE J78 standards and features a zinc-plated finish per ASTM B633 for corrosion resistance. The integrated neoprene washer ensures a secure, weather-tight seal. Learn More
This 4-1/2 inch Tube Ring is crafted from A36 carbon steel for excellent weldability and structural strength. Conforming to ASTM A36 specifications, it offers a minimum tensile strength of 58,000 PSI. Its large diameter makes it ideal for fabricating heavy-duty handrails, architectural elements, and custom gate designs. A reliable hardware component for fabricators and metalworkers. In stock for same-day pickup in Los Angeles. Learn More
Durable 16-gauge galvanized steel slotted angle with 1-1/4" legs for superior corrosion resistance. The pre-punched pattern allows for easy, bolt-together assembly in framing, shelving, and MRO applications. Ideal for creating custom racks and supports. Learn More
Galvanized Slotted Angle manufactured from durable 16 gauge steel for reliable performance in light to medium-duty applications. This 1-1/4" x 1-1/4" angle features a hot-dip galvanized finish conforming to ASTM A653 for superior corrosion resistance, ideal for custom framing, shelving, and MRO projects. Learn More
This large industrial slide bolt features a robust 3/4" diameter steel shaft and durable black finish. Engineered for reliable security on heavy-duty gates, doors, and enclosures. Ideal for fabrication and MRO applications. Learn More
This 5/16” x 3” Hex Lag Screw is a heavy-duty fastener manufactured from low carbon steel to meet ASTM A307 specifications. The zinc plating provides essential corrosion resistance, making it ideal for structural wood-to-wood and wood-to-masonry applications. Learn More
This industrial utility block is a versatile hardware component for MRO and fabrication. Made from durable, general-purpose low-carbon steel, it serves as a reliable spacer, shim, or mounting base. Its precise dimensions ensure stability in various industrial applications. Learn More
Versatile 16-gauge steel slotted angle for framing and support, featuring a hot-dip galvanized finish for superior corrosion resistance. This product, measuring 2-1/4" x 1-1/2" x 120", provides a durable, bolt-together solution for industrial shelving, racks, and MRO projects. Learn More
The 1-1/2 Double Lock Box is an industrial-grade hardware component for fabricating secure gate and fence locking systems. Made from weldable steel, it provides a durable housing for standard lock mechanisms, making it ideal for ornamental and security applications. Learn More
The Forney 3/32" (2.4mm) Easy All Steel Stainless Steel Electrode is a premium welding consumable designed for superior performance. This AWS/ASME certified electrode operates within a 35-70A range, ensuring strong, clean welds on various stainless steel applications. Learn More
Our 3x3/4 Barrel Hinges are heavy-duty, weld-on hardware engineered for high-load applications. Constructed from durable, unfinished weldable steel, they provide a robust pivot point for heavy gates, doors, and custom fabrication projects. These industrial-grade hinges ensure smooth, reliable operation and are ready for welding and finishing. Learn More
This 1-1/4" square pressed steel cap provides a clean, finished look for fence posts and railings. Made from durable, weldable mild steel, it protects post interiors from debris and weather. Ideal for ornamental and security fencing applications. Learn More
The 14 x 2” Hex Washer Self-Drill Screw is a high-performance fastener engineered to SAE J78 standards. It features a hardened steel point for drilling into metal without a pilot hole and a bonded neoprene washer for a weather-tight seal. The zinc plating, compliant with ASTM B633, provides excellent corrosion resistance for exterior applications. Learn More
The 2-Way Hand Riveter is an industrial-grade tool for reliable fastening in fabrication and MRO. Constructed from high-strength steel alloy, it provides the leverage needed for setting aluminum and steel rivets. Includes multiple nose pieces for versatility. Learn More
This 1-¼" x 3-¼" L-Clip Welding Tab is a high-quality fabrication component made from durable, weldable mild steel. Designed for structural connections and reinforcement, it conforms to AWS welding practices for strength and reliability. Ideal for creating strong, permanent weld points in MRO and new construction projects. Learn More
This 2-1/2" Square Pressed Steel Cap provides a durable, clean finish for square tubing. Made from commercial-grade pressed steel, it is ideal for ornamental fencing, handrails, and gates. The cap is supplied with a raw, weldable finish for easy fabrication. Learn More
Our 1-1/4 Double Lock Box is a durable gate hardware component crafted from high-strength Class 25-30 gray cast iron. Designed for 1-1/4" square tubing, it provides a secure housing for lock mechanisms in ornamental fences and security gates. Ideal for industrial fabrication and commercial applications. Learn More
This 3/32" 6013 all-purpose welding rod is an AWS/ASME certified electrode ideal for general fabrication. Designed for a stable arc on AC/DC, it delivers smooth beads on mild steel. A versatile choice for MRO and light structural work. Learn More
This industrial-grade, oil-based black primer is engineered for direct-to-metal (DTM) applications, providing a durable foundation for topcoats. Its robust alkyd formulation ensures excellent adhesion and superior corrosion resistance for fabrication and MRO projects. Learn More
Forney 1/8" (3.2mm) Aluminum Welding Electrode designed for reliable fabrication and repair. This AWS-compliant consumable ensures consistent, high-quality welds on various aluminum alloys. Ideal for professional MRO and fabrication projects. Learn More
This 1/8" 6013 All-Purpose Welding Rod is an AWS/ASME certified electrode designed for versatile performance. Ideal for general fabrication and repair on mild steel, it offers a stable arc and easy slag removal. Packaged in a convenient 10 LB container for MRO and project use. Learn More
This ½” x 3” Hex Lag Screw is manufactured from low-carbon steel for reliable performance in general construction and framing. It meets ASTM A307 specifications, providing a minimum tensile strength of 60,000 psi. The zinc-plated finish offers moderate corrosion resistance. Learn More
Our 3-1/2x2-1/4 Weldable Butt Hinges are engineered from high-strength, low-carbon steel for maximum weld penetration and durability. These components are designed for heavy-duty applications where a permanent, strong pivot is required. Ideal for steel gates, doors, and MRO projects. Learn More
Our industrial Fire Door Lock is engineered for critical safety applications in commercial and institutional buildings. This lock is certified to UL 10C standards for fire resistance and constructed from high-strength steel for maximum durability and security. It is designed for reliable performance on fire-rated door assemblies. Learn More
This 12" x 7/64" Cut-Off Wheel is an industrial-grade abrasive tool compliant with ANSI B7.1 safety standards. Engineered with fiberglass reinforcement for a maximum speed of 5,100 RPM, it is designed for fast, clean cuts on various metals. The 1" arbor hole fits standard stationary cut-off machines. Learn More
This 1/2" x 3" Hex Lag Screw features a zinc-plated finish for moderate corrosion resistance. Manufactured from low carbon steel to meet ASTM A307 standards, it provides reliable holding power for wood construction and framing applications. Learn More
This 5/16" x 3" one-way screw is engineered for permanent, tamper-resistant applications. Manufactured from industrial-grade steel with a protective black finish, its unique drive system prevents removal once installed. Conforms to common ANSI/ASME dimensional standards. Learn More
This 5/16" x 1" Hex Lag Screw is a heavy-duty fastener made from low carbon steel, meeting ASTM A307 standards. With a minimum tensile strength of 60,000 psi and a corrosion-resistant zinc plating, it ensures strong, reliable connections in wood framing and construction applications. Learn More
This 8 x ½ Pan Head Phillips Truss Screw is a versatile fastener made from low carbon steel. It features a zinc plating with CR3+ passivate compliant with ASTM B633 for reliable corrosion resistance. The wide truss head provides an excellent bearing surface for thin materials. Learn More
This 1/4" x 2-1/2" Hex Lag Screw is manufactured from low carbon steel, conforming to ASTM A307 strength standards. The zinc-plated finish (ASTM B633) provides essential corrosion resistance, making it ideal for wood construction and framing applications. Learn More
A 1/2" x 4" Hex Lag Screw featuring a protective zinc plating per ASTM B633. Manufactured from low carbon steel compliant with ASTM A307 standards for reliable performance in light-duty framing and construction. Learn More
High-performance 80 grit zirconia flap disc for rapid stock removal and finishing. Compliant with ANSI B7.1 safety standards, this 4-½” x ⅞” disc is rated for 13,300 RPM. Ideal for grinding and blending on steel and other ferrous metals. Learn More
This industrial-grade 5/16" x 4-1/2" masonry drill bit is engineered for high-performance drilling in concrete, brick, and block. It features a durable tungsten carbide tip for extended life and precision, manufactured to meet ANSI B212.15 standards. Learn More
The C199XL is an industrial-grade ornamental cap rail fitting designed for durability and a precise fit. Engineered from high-quality metals for architectural applications, it is a key component for constructing robust, ADA-compliant handrail systems. Learn More
This 14 x 1-1/2" Hex Washer Self-Drill Screw is an industrial-grade fastener designed for efficient metal-to-metal connections. It features a zinc-plated finish per ASTM B633 for corrosion resistance and complies with SAE J78 standards. The integrated neoprene washer provides a weather-tight seal. Learn More
The Bobco Mini Portable Welding Machine is a versatile dual-voltage (110V/220V) unit designed for stick welding. It is compatible with AWS-certified electrodes from 1/16" to 1/8" in diameter, delivering reliable performance for light fabrication, repair, and MRO tasks. Learn More
Durable 14" brown leather welding gloves engineered for high-heat protection. These industrial-grade gloves meet ANSI/ISEA 105 standards for cut and abrasion resistance, making them ideal for professional welding and fabrication. Learn More
Industrial-grade Razor Wire Clips sold in convenient 25-packs. Made from heavy-duty galvanized steel for superior corrosion resistance and high tensile strength. Essential hardware for securing concertina and razor wire in high-security fence installations. Learn More
Secure equipment and materials with the Regal 2” x 20ft Ratchet Cargo Lash. This industrial tie-down is made from durable polyester webbing, meets WSTDA-T-1 standards, and features a 3,335 lbs Working Load Limit (WLL) for reliable performance. Learn More
This industrial-grade 0.8mm (.030") MIG welding wire is supplied on 33 LBS spools. Manufactured to meet or exceed AWS/ASME certification standards, it ensures consistent performance for professional fabrication and repair on mild and low-alloy steels. Learn More
This 5/8" x 5" Heavy-Duty Wedge Anchor is engineered for reliable fastening in solid concrete. Manufactured from high-strength carbon steel and finished with a CR3+ zinc plating for enhanced corrosion resistance, it provides superior holding power for structural and MRO applications. Includes nut and washer for immediate installation. Learn More
This 6” heavy-duty solid V-groove wheel is engineered for high-capacity industrial applications. Constructed from solid steel for maximum durability, it supports significant load ratings and is designed for reliable operation on angle iron tracks. Ideal for industrial gates, heavy carts, and material handling systems. Learn More
Our industrial-grade Black Nitrile Disposable Gloves offer superior puncture and chemical resistance. These powder-free gloves are ANSI/ISEA 105 rated for reliable hand protection in demanding MRO, fabrication, and general-purpose applications. Packaged in a convenient 100-piece box. Learn More
The S-Scroll (5024D) is a decorative hardware element crafted from high-quality Class 25-30 gray iron. Its classic design is ideal for adding architectural detail to fences, gates, and furniture. This industrial-grade component ensures durability and an authentic forged appearance. Learn More
This ½” x 4” Power Bull Anchor is a heavy-duty mechanical wedge anchor for fastening into concrete. Manufactured from high-strength carbon steel with a zinc plating compliant with ASTM B633 for corrosion resistance. Includes nut and washer for a complete installation. Learn More
The Bobco Welding Machine MMA 160 is a portable, high-performance stick welder designed for industrial use. It delivers a stable 160-amp arc, ideal for use with AWS/ASME certified electrodes like 6010, 6013, and 7018. Its durable construction ensures reliability for both fabrication and MRO projects. Learn More
This 5/16" x 2" one-way screw is a tamper-resistant fastener made from industrial-grade low carbon steel with a protective black finish. Designed for security applications based on ASTM A307 material standards where removal prevention is critical. Learn More
The ½” x 3” Power Bull Anchor is a heavy-duty, high-strength steel fastener designed for secure anchoring in concrete and masonry. This industrial-grade anchor includes a nut and washer and features a zinc-plated finish per ASTM B633 for enhanced corrosion resistance. Learn More
The 1/4" Cobalt Drill Bit is engineered from M35 steel with 5% cobalt for exceptional heat resistance up to 1100°F. Its 135° split-point geometry ensures precise, walk-free starts and efficient drilling in hard materials like stainless steel and cast iron. Learn More
The L-Clip Welding Tab is a critical fabrication component made from high-quality, weldable mild steel. Measuring 1-1/2" x 3-1/2", this tab is engineered for creating strong, precise fixturing points and conforms to general industry standards for material quality and weldability. Learn More
This Small Slide Bolt features a durable 1/2" diameter steel shaft for reliable latching. Manufactured from industrial-grade low-carbon steel similar to ASTM A307 material, it provides a simple and effective security solution for light-duty doors and gates. Its robust construction ensures long-lasting performance in MRO and fabrication applications. Learn More
These 10" off-white gloves are crafted from soft, durable goat leather for excellent dexterity and tactile sensitivity. They are ANSI/ISEA 105 rated, making them ideal for general handling, assembly, and MRO tasks requiring reliable hand protection. Learn More
Our Spring Loaded Wheel with 3 Casters is an industrial-grade solution for material handling equipment. Engineered to support dynamic load ratings from 200 to 2000 lbs, it provides superior shock absorption and smooth mobility for carts, racks, and dollies. The durable steel construction ensures reliability in demanding warehouse and fabrication environments. Learn More
Our 5" (5/8) J-Bolt Adjustable Barrel Hinges are engineered from heavy-duty, weldable low carbon steel for superior strength and durability. Designed for high-load applications, these hinges provide smooth, reliable operation for heavy gates and doors. The adjustable J-bolt allows for precise alignment during installation. Learn More
This 1/2" x 3" heavy-duty wedge anchor is engineered from high-strength carbon steel for reliable fastening in solid concrete. It features a corrosion-resistant Zinc Plated CR3+ finish compliant with ASTM B633 and includes a nut and washer. Ideal for demanding structural and industrial MRO applications. Learn More
This industrial-grade, oil-based DTM (Direct-to-Metal) paint offers a durable flat black finish. Engineered for superior adhesion and corrosion resistance consistent with MIL-SPEC performance criteria, it is ideal for protecting steel and iron surfaces in fabrication and MRO projects. Learn More
This industrial-grade, direct-to-metal (DTM) semi-gloss black paint is an alkyd-based enamel designed for superior corrosion protection. It provides a durable, weather-resistant finish on metal surfaces without requiring a separate primer, making it ideal for MRO and fabrication projects. Learn More
This industrial-grade, oil-based DTM paint delivers a durable black semi-gloss finish. Its alkyd enamel formulation provides excellent corrosion resistance and adhesion directly on prepared metal surfaces, making it ideal for fabrication and MRO projects. Learn More
This industrial-grade gray primer features a high-performance oil-based (alkyd) formulation for superior adhesion and corrosion resistance. It serves as an excellent foundation for topcoats on steel and other metal surfaces in demanding MRO and fabrication environments. Learn More
Our industrial-grade, oil-based white primer is an alkyd formulation designed for superior adhesion on metal surfaces. It provides an excellent foundation for topcoats, ensuring long-lasting corrosion protection for fabrication and MRO projects. Ideal for direct-to-metal (DTM) surface preparation. Learn More
Industrial-grade Acetone is a powerful, fast-evaporating solvent designed for cleaning and degreasing metal surfaces. It effectively removes oils, grease, and contaminants, ensuring optimal surface preparation for painting or welding. Conforms to industrial purity standards like ASTM D329. Learn More
Industrial Hardware Consumable 218 is a high-performance solution for MRO and fabrication. Formulated to meet key industrial performance standards like ASTM C557, this product ensures durability for demanding applications on metal surfaces. Ideal for corrosion protection and general maintenance tasks. Learn More
This industrial-grade 0.9mm (.035) MIG welding wire is engineered for high-performance fabrication and repair. Certified to meet AWS/ASME standards, it provides a stable arc and minimal spatter for clean, strong welds on various steel types. Available in an 11 LBS (1KG) spool. Learn More
The EAGLE II Swing Gate Operator provides robust and reliable gate automation. This industrial-grade operator is UL 325 compliant for safety and features a heavy-duty steel chassis for durability in commercial and high-traffic applications. Learn More
The C-Scroll (5112A) is a classic decorative element forged from high-quality Class 25-30 gray iron. This architectural-grade component is designed to add an elegant, traditional finish to custom fences, gates, and railings in fabrication projects. Learn More
This 0.9mm (.035") flux core welding wire is engineered for high-performance welding without shielding gas. Meeting AWS A5.20 specifications, this self-shielded wire provides a stable arc and smooth bead appearance for general fabrication. Ideal for welding on mild and carbon steels. Learn More
The 1/2" x 5" Power Bull Anchor is a heavy-duty carbon steel fastener designed for anchoring into concrete. Featuring a zinc-plated finish per ASTM B633 for corrosion resistance, it provides reliable holding power for structural and MRO applications. Includes nut and washer for complete installation. Learn More
The 1-¼” Single Lockbox with a single hole is an essential component for security gates and fences. Constructed from high-quality, weldable steel, it provides a durable housing for gate locks. Designed for easy installation and long-term performance in commercial and residential applications. Learn More
This high-performance 0.8mm (.030") MIG welding wire is engineered for superior results in fabrication and repair. AWS/ASME certified, it ensures strong, consistent welds on mild and carbon steels. Packaged in convenient 11 LBS (1KG) spools for project efficiency. Learn More
The C199L is a decorative handrail fitting for 1-1/4" cap rails. Manufactured from durable Class 25-30 gray iron, this component provides a secure and aesthetic termination for architectural and ADA-compliant railing systems. Learn More
This 4” x 1-¾” V-Groove Wheel is an industrial-grade component designed for high-capacity material handling. Manufactured from high-strength steel for durability, it supports heavy loads on inverted angle iron tracks. Ideal for sliding gates, assembly lines, and industrial carts. Learn More
This 4" Heavy Duty Solid V-Groove Wheel is engineered for high-load applications on inverted angle iron track. Constructed from solid steel for maximum durability and smooth operation, it's ideal for industrial sliding gates, material handling carts, and production line systems. Supports significant weight with reliable guidance. Learn More
This industrial-grade 0.9mm (.035") MIG wire is AWS/ASME certified for consistent and reliable welds. Ideal for a wide range of steel fabrication and repair applications, it ensures strong performance and smooth feeding. Available in 33 LBS spools for production environments. Learn More
The C199 is a durable cast iron component designed for 1-1/2" cap rail systems. This ornamental hardware is engineered for a precise fit in ADA-compliant handrail and fencing applications, providing both structural integrity and a decorative finish. Learn More
Enhance perimeter security with our CBT-65 Steel Razor Wire. This 50-foot coil is made from high-tensile galvanized steel for maximum durability and corrosion resistance, manufactured to meet demanding industrial security standards. It serves as a superior alternative to standard barbed wire for high-security applications. Learn More
This industrial-grade 0.8mm (.030") MIG welding wire is AWS/ASME certified for professional use. The steel alloy composition ensures a stable arc, low spatter, and consistent wire feed for high-quality welds in fabrication and repair applications. Packaged in a convenient 2.2 LBS (1 KG) spool. Learn More
The 1/8" Cobalt Drill Bit is engineered from M35 steel with 5% cobalt for superior heat resistance when drilling hard metals. Featuring a 135° split-point geometry for precision, it is ideal for stainless steel and cast iron applications compliant with ANSI/ASME B94.11M standards. Learn More
This 0.9mm (.035") flux core welding wire is engineered for high-performance welding without external shielding gas. It meets AWS/ASME certification standards, providing reliable, strong welds for various steel fabrication projects. Packaged in a convenient 2.2 LBS (1KG) spool for portability and ease of use. Learn More
This 1-¼” Single Hole Lockbox is fabricated from high-quality, weldable steel. Designed for security gate and fence applications, it provides a durable housing for standard lock mechanisms. Its single-hole configuration ensures straightforward installation and compatibility. Learn More
This 60 Grit Zirconia Flap Disc is a high-performance abrasive for rapid stock removal and finishing on steel and other metals. It is engineered with a durable zirconia alumina grain and complies with ANSI B7.1 safety standards. The Type 29 conical shape is ideal for aggressive grinding. Learn More
This industrial-grade 0.8mm (.030") flux core welding wire is engineered for high-performance fabrication and repair. Meeting AWS/ASME certification standards, it provides a stable arc and excellent bead appearance for general-purpose steel welding. Packaged in a convenient 11 lbs (1kg) spool. Learn More
This 1/4" x 4-1/4" Cobalt Industrial Drill Bit is engineered from M35 steel with 5% cobalt for superior heat resistance. Conforming to ANSI/ASME B94.11M standards, its 135° split-point tip ensures precise starts and is ideal for drilling into stainless steel and cast iron. Learn More
The 251V is a high-quality decorative ornamental element crafted from Class 25-30 gray iron. Its durable composition is ideal for architectural detailing, custom fencing, gates, and other fabrication projects requiring classic, robust designs. Learn More
This 6" Cast Iron V-Groove Wheel is engineered for smooth operation on angle iron tracks. Made from industrial-grade Class 25-30 gray iron, it supports a heavy-duty load capacity of 500 lbs. Ideal for sliding gates, industrial doors, and material handling carts. Learn More
GLOSS WHITE, DTM (DIRECT TO METAL TECHNOLOGY), OIL BASE$47.99 As low as $42.99Bulk Pricing:
10″ X 1/8″ X 1″ CUT-OFF WHEEL, RPM: 6,100$5.99 As low as $3.69Bulk Pricing:
4-1/2" X .040 X 7/8" CUT-OFF WHEEL, RPM: 13,300$2.29 As low as $1.79Bulk Pricing:
1/2 Cobalt Drill Bit$5.99Our 1/2 inch Cobalt Drill Bit is engineered from M35 steel with 5% cobalt for superior heat resistance up to 1100°F. Featuring a 135° split-point geometry compliant with ANSI standards, this bit is designed for high-performance drilling in hard materials like stainless steel and cast iron. Learn More
WHITE PRIMER, INDUSTRIAL GRADE, OIL BASE$43.99 As low as $42.49Bulk Pricing:
Hook Lock Double Cylinder$33.34 As low as $24.41Bulk Pricing:
5" x 5" Heavy Duty Square Flat Steel Metal Base Plate With Holes$4.49 As low as $2.99Bulk Pricing:
8" X 8" Heavy Duty Square Flat Steel Metal Base Plate With Holes$14.99 As low as $10.39Bulk Pricing:
Galvanized Slotted Angle 1-1/4" X 1-1/4" X 16GA X 144"$31.18 As low as $18.71Bulk Pricing:
4 Sq Pressed Steel Cap$3.99 As low as $1.63Bulk Pricing:
3" x 3" Heavy Duty Square Flat Steel Metal Base Plate With Holes$1.99 As low as $1.29Bulk Pricing:
Super Tool Press Pliers 10"Special Price $2.99 Regular Price $11.99The Super Tool Press Pliers 10" are engineered from high-strength forged alloy steel for superior gripping power and durability. Designed to meet ASME B107 standards, these industrial-grade pliers are essential for demanding fabrication and MRO tasks. Learn More
2.2 LBS (1KG) MIG WIRE (HYDRABOND), DIA: .(35) 0.9MM$10.99This high-quality 0.9mm (0.035") MIG welding wire is designed for superior performance in industrial applications. Certified to meet AWS/ASME standards, this steel alloy wire provides a stable arc and minimal spatter for clean, strong welds. Ideal for fabrication, automotive repair, and MRO projects. Learn More
14 x ¾" Hex Washer Self-Drill Screw Zinc + Neoprene (42200)$0.09This 14 x ¾" Hex Washer Self-Drilling Screw is designed for efficient metal-to-metal fastening. It complies with SAE J78 standards and features a zinc-plated finish per ASTM B633 for corrosion resistance. The integrated neoprene washer ensures a secure, weather-tight seal. Learn More
4-1/2 Inches Tube Ring$1.99This 4-1/2 inch Tube Ring is crafted from A36 carbon steel for excellent weldability and structural strength. Conforming to ASTM A36 specifications, it offers a minimum tensile strength of 58,000 PSI. Its large diameter makes it ideal for fabricating heavy-duty handrails, architectural elements, and custom gate designs. A reliable hardware component for fabricators and metalworkers. In stock for same-day pickup in Los Angeles. Learn More
Galvanized Slotted Angle 1-1/4" X 1-1/4" X 16GA X 48"$10.40 As low as $6.24Bulk Pricing:
Galvanized Slotted Angle 1-1/4" X 1-1/4" X 16GA X 96"$20.81 As low as $12.49Bulk Pricing:
218 - DIMENSION��?�� X 2-��?�� X 4-��?��$1.99 As low as $0.69Bulk Pricing:
Galvanized Slotted Angle 2-1/4" X 1-1/2" X 16GA X 120"$38.98 As low as $23.39Bulk Pricing:
1-1/2 Double Lock Box$9.99 As low as $5.69Bulk Pricing:
3/32″ (2.4MM) FORNEY EASY ALL STEEL STAINLESS STEEL ELECTRODE, 1LB, 35-70A$54.99 As low as $50.99Bulk Pricing:
3X3/4 Barrel Hinges$2.99 As low as $1.59Bulk Pricing:
1-1/4 Sq Pressed Steel Cap$0.76 As low as $0.36Bulk Pricing:
14 x 2” Hex Washer Self-Drill Screw Zinc + Neoprene$0.29 As low as $0.09Bulk Pricing:
2-Way Hand RiveterSpecial Price $4.99 Regular Price $19.99The 2-Way Hand Riveter is an industrial-grade tool for reliable fastening in fabrication and MRO. Constructed from high-strength steel alloy, it provides the leverage needed for setting aluminum and steel rivets. Includes multiple nose pieces for versatility. Learn More
2-1/2 Sq Pressed Steel Cap$2.42 As low as $1.14Bulk Pricing:
1-1/4 Double Lock Box$9.99 As low as $5.69Bulk Pricing:
3/32″ 6013 ALL PURPOSE WELDING ROD, 10LBS$34.99 As low as $33.09Bulk Pricing:
1/8" (3.2mm) Forney Aluminum Welding Electrode, 1/2 LB Pack$39.99Forney 1/8" (3.2mm) Aluminum Welding Electrode designed for reliable fabrication and repair. This AWS-compliant consumable ensures consistent, high-quality welds on various aluminum alloys. Ideal for professional MRO and fabrication projects. Learn More
1/8″ 6013 ALL PURPOSE WELDING ROD, 10LBS$25.99 As low as $23.49Bulk Pricing:
3-1/2x2-1/4 Weldable Butt Hinges$3.99 As low as $0.83Bulk Pricing:
Fire Door Lock$15.99 As low as $10.29Bulk Pricing:
12" X 7/64" X 1" CUT-OFF WHEEL, RPM: 5,100$6.99 As low as $3.99Bulk Pricing:
5/16" X 3" ONE WAY SCREW STEEL FINISH BLACK$0.44 As low as $0.34Bulk Pricing:
80 GRIT ZIRCONIA FLAP DISC, 4-½” X ⅞”, RPM:13,300$9.99 As low as $9.49Bulk Pricing:
5/16" x 4-1/2" Masonry Industrial Drill Bit, Carbide Tip$3.99 As low as $3.69Bulk Pricing:
C199XL - 2-1/4" Width for 1-3/4" Cap Rail$3.99 As low as $2.59Bulk Pricing:
14 x 1-1/2" Hex Washer Self-Drill Screw Zinc + Neoprene$0.29 As low as $0.09Bulk Pricing:
BOBCO MINI PORTABLE WELDING MACHINE, 110V/220V, ELECT:1/16"-1/8"$149.99The Bobco Mini Portable Welding Machine is a versatile dual-voltage (110V/220V) unit designed for stick welding. It is compatible with AWS-certified electrodes from 1/16" to 1/8" in diameter, delivering reliable performance for light fabrication, repair, and MRO tasks. Learn More
Regal 2” x 20ft Ratchet Cargo LashSpecial Price $5.99 Regular Price $17.99Secure equipment and materials with the Regal 2” x 20ft Ratchet Cargo Lash. This industrial tie-down is made from durable polyester webbing, meets WSTDA-T-1 standards, and features a 3,335 lbs Working Load Limit (WLL) for reliable performance. Learn More
33 LBS (1KG) MIG WIRE (HYDRABOND), DIA: .(30) 0.8MM$69.99 As low as $48.99Bulk Pricing:
Bobco Welding Machine MMA 160$160.00 As low as $139.99Bulk Pricing:
5/16" X 2" ONE WAY SCREW STEEL FINISH BLACK$0.39 As low as $0.29Bulk Pricing:
1/4 Cobalt Drill Bit$9.35The 1/4" Cobalt Drill Bit is engineered from M35 steel with 5% cobalt for exceptional heat resistance up to 1100°F. Its 135° split-point geometry ensures precise, walk-free starts and efficient drilling in hard materials like stainless steel and cast iron. Learn More
Spring Loaded Wheel W/ 3 Casters$13.99 As low as $11.99Bulk Pricing:
5" (5/8) J-Bolt Adjustable Barrel Hinges$10.99 As low as $6.69Bulk Pricing:
1/2" X 3" WEDGE ANCHOR AND WASHER ZINC PLATED CR3+ HEAVY DUTY$0.84 As low as $0.40Bulk Pricing:
FLAT BLACK, DTM (DIRECT TO METAL TECHNOLOGY), OIL BASE$43.99 As low as $41.99Bulk Pricing:
BLACK SEMI GLOSS, DTM (DIRECT TO METAL TECHNOLOGY), INDUSTRIAL GRADE$5.99 As low as $3.29Bulk Pricing:
BLACK SEMI GLOSS, DTM (DIRECT TO METAL TECHNOLOGY), OIL BASE$45.99 As low as $40.99Bulk Pricing:
GRAY PRIMER, INDUSTRIAL GRADE, OIL BASE - HWPAPAT510B$5.99 As low as $3.29Bulk Pricing:
ACETONE, INDUSTRIAL METAL CLEANING AGENT, HIGLY FLAMABLE$18.99 As low as $15.99Bulk Pricing:
218 - DIMENSION?��?�� X 2-��?�� X 4-��?��$2.19 As low as $0.79Bulk Pricing:
11 LBS (1KG) MIG WIRE (HYDRABOND), DIA: .(35) 0.9MM$26.99 As low as $19.99Bulk Pricing:
C-SCROLL (5112A) DIMENSION: ��?�� X ��?�� X 3-?��?�� X 7?��$2.99 As low as $1.49Bulk Pricing:
11 LBS (1KG) MIG WIRE (HYDRABOND), DIA: .(30) 0.8MM$25.99 As low as $19.49Bulk Pricing:
C199L - WIDTH: 2", FOR 1-1/4" CAP RAIL$6.99 As low as $6.59Bulk Pricing:
33 LBS (1KG) MIG WIRE (HYDRABOND), DIA: .(35) 0.9MM$79.99 As low as $55.99Bulk Pricing:
C199 - 1-1/2" Width, For 1-1/2" Cap Rail$4.99The C199 is a durable cast iron component designed for 1-1/2" cap rail systems. This ornamental hardware is engineered for a precise fit in ADA-compliant handrail and fencing applications, providing both structural integrity and a decorative finish. Learn More
2.2 LBS (1KG) MIG WIRE (HYDRABOND), DIA: .(30) 0.8MM$9.99 As low as $7.49Bulk Pricing:
1/8 Cobalt Drill Bit$4.97The 1/8" Cobalt Drill Bit is engineered from M35 steel with 5% cobalt for superior heat resistance when drilling hard metals. Featuring a 135° split-point geometry for precision, it is ideal for stainless steel and cast iron applications compliant with ANSI/ASME B94.11M standards. Learn More
60 GRIT ZIRCONIA FLAP DISC, 4-½″ X ⅞″ X ⅞″, RPM:13,300$8.99 As low as $8.49Bulk Pricing:
11LBS (1KG) FLUX CORE WIRE, DIA: (.30) 0.8MM$75.99 As low as $53.99Bulk Pricing:
1/4" X 4-1/4" COBALT INDUSTRIAL DRILL BIT, 135° SPLIT POINT$10.99 As low as $7.69Bulk Pricing:
251V - DIMENSION: ?��?�� X 1-��?�� X 1-?�??��$1.79 As low as $0.96Bulk Pricing: